Search Results

Search found 17063 results on 683 pages for 'window restore'.

Page 306/683 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports.

  - by sin

  I have a big problem! After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports. I have to install windows in other PC which has usb 2.0port only! so I made usb booting disk using usb 3.0 in 3.0 port. but after that it never worked except in 3.0 ... and I could't restore my usb. I alredy fomated in cmd and others in usb3.0 port! but there is no change. and I couldn't find it in usb 2.0 port. plz help me.

  Read the article

• Route eth0 to internet traffic and eth1 to local traffic

  - by Romain Caire

  How can I route all my internet traffic on eth0 (everything except 192.168.1.0/24) and route my local traffic through eth1 (192.168.1.0)? Here is my attempt : # Flush ALL THE THINGS. ip route flush table main # Restore the main table. I flushed it because OpenVPN does weird things to it. ip route add 127.0.0.0/8 via 127.0.0.1 dev lo ip route add 0.0.0.0/0 via 164.67.195.1 ip route add 192.168.1.0/24 via 192.168.1.1 ip route flush cache

  Read the article

• Updating to Exchange 2013 - any way to do it now?

  - by TomTom

  Exchange 2013 is out, available for some epople already. Got if from the VLC Center, now trying to get an upgrade path that works for some customers. Problem: There is no upgrade. It is "install on new Server, move mailboxes. This means coexistence with Exchagne 2010 for the time to move the Mailbox. Sadly the only compatible Exchange is Exchange 2010 Sp3 - which is not going to be bout for quite some time. Any way to still do an update? Backup, restore to new Server? Any beta of the SP that is good enough to ONLY move the mailboxes? I do not care about the rest - this really is "install Exchange 2013, move mailboxes, UNINSTALL 2010". I am quite - ah - unhappy that at the end the only one who will be able to intall 2013 are new companies right now.

  Read the article

• Gnome keyboard shortcuts dysfunctional after waking up from sleep

  - by dennis2008

  Hello, I am using Ubuntu 9.10 on my Thinkpad T61. Very often after the system woke up from sleep, all the gnome shortcuts went dead (no effect when key combinations pressed). Things like "Alt+F4, Alt+TAB" are dead; things like Ctrl+C/Ctrl+V are OK; buttons such as volume up/down also OK; I tried to Google for answers but wasn't lucky enough. Any idea how to solve it? Thanks! If it's not preventable, can I at least restore them without restarting the session?

  Read the article

• Using robocopy and excluding multiple directories

  - by GorrillaMcD

  I'm trying to copy some directories from a server before I restore from backup (my latest backup was corrupt, so I have to use an older one :( ). I'm in the Windows Recovery Environment and have access to the server's file system G:\ and my backup media C:\. But, since I'm more familiar with Linux, I'm having a bit of trouble with the command line in Windows, specifically robocopy. I want to copy multiple directories (maintaining the same directory structure) from G:\ to C:\ while excluding others (namely, the Windows and Program Files folders). I can't figure out the syntax for the /XD option. I was hoping to do something like: robocopy G: C:\backup /CREATE /XD "dir1","dir2", ...

  Read the article

• Clicking far away in vim in tmux in urxvt

  - by paps

  I use vim inside tmux inside urxvt, and the mouse works perfectly well for clicking and selecting text, except when I want to click too far to the right. It seems to be related to the distance in number of columns from the left. When I go beyond column ~200 (not sure about the exact number), clicking simply does nothing. Note that it's not related to a vim window: with two vim windows taking ~150 columns each, clicking will not work after the ~50th column in the second window. It's related to the whole vim session. Also note that clicking far away in a big tmux pane (200 columns) works perfectly. In my .tmux.conf I have this line: set -g default-terminal "screen-256color" and in my .vimrc I have this: if &term =~ "^screen" autocmd VimEnter * silent !echo -ne "\033Ptmux;\033\033]12;7\007\033\\" let &t_SI = "\<Esc>Ptmux;\<Esc>\<Esc>]12;5\x7\<Esc>\\" let &t_EI = "\<Esc>Ptmux;\<Esc>\<Esc>]12;7\x7\<Esc>\\" autocmd VimLeave * silent !echo -ne "\033Ptmux;\033\033]12;14\007\033\\" end It changes the cursor's color depending on the editing mode of vim, and it works, meaning that tmux really sets $TERM to "screen-256color" — but I don't know if this has any relevance with my mouse problem. I'm running Ubuntu 12.04, vim 7.3, tmux 1.6 and rxvt-unicode 9.14. Does anybody have an idea about what is causing this problem? Thanks.

  Read the article

• Linux RAID0 - relocating member disk

  - by qdot

  I've got an issue I would rather handle with the array online - I am using RAID0 for temporary video storage - data that is low-cost to restore, but that is used frequently. The software array looks like this: md1 : active raid0 sdb1[2] sdc1[3] sdd1[0] sde1[1] 1953487616 blocks 64k chunks I have another partition (sda1) in this system, that I want to use to replace sdc1 (The drives are of varying age, and sdc1 is definitely the slowest one, limiting the entire array's sequential read performance to only 300MB/s). Is there a way to migrate the data from sdc1 to sda1 while the array is still online?

  Read the article

• VMware guest pauses when the host is idle - how do I keep it running?

  - by EMP

  I'm running VMWare Worstation 7 with Windows 7 x64 as guest, Windows XP x64 as host. Inside the guest I run a long-running console application, which prints out progress messages with timestamps on them. Sometimes I leave it running for several hours while I lock the host OS and don't touch the computer at all. When I come back I find that some time after I left it seems to have paused and automatically resumed: the console app hasn't made much progress and there's a large time gap in its progress messages. There's nothing relevant in the host event log, but in the guest Application event log I can see these messages around the time I left: A request to disable the Desktop Window Manager was made by process (VMware Tools Service) The Desktop Window Manager was unable to start because composition was disabled by a running application And later, around the time I returned, this shows up in the System log: The system time has changed to ?2012?-?01?-?12T06:36:46.921000000Z from ?2012?-?01?-?12T03:18:19.953079000Z. That seems to support my theory that it's VMware doing something and not Windows itself. The question is: how do I stop it doing that? I want my application to continue running. By the way, the power options are set to never sleep in both guest and host.

  Read the article

• Dual hard drive Windows 7 system, modified the registry to get programs to install on second drive, now IE doesn't work

  - by paul

  I have a dual hard drive Windows 7 system, Windows is installed on an SSD (C:) and I modified the registry to try to force programs to install on second HDD drive (another letter). The registry edits are pretty simple, just a few keys in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion to change the drive letter. For the most part the system is very fast and works great, but IE doesn't work anymore. With IE10, it opens for a flash with a white window then closes. I tried installed IE11 which opens a white window for a few seconds, doesn't respond, then crashes. I've tried all the solutions I could find. This includes resetting the IE settings, "uninstalling" and re-installing IE, which is just turning it on and off in "Turn Windows Features on or off", copying the Program Files\Internet Explorer files onto both/either drives, changing the registry keys back to use C:, lots of rebooting, and safe mode. Nothing has worked. I don't see errors in the event viewer, but I might not know what to look for. Any ideas on how to get IE running? I don't need IE for daily browsing, I just need it for cross-browser testing on sites I build and on the rare occasion a page only works in IE. I don't really want to use a virtual machine, but would be ok with something standalone like tredosoft's, but I'm not aware of something like that for current versions of IE.

  Read the article

• How To Cancel Pending Windows 7 Updates

  - by Itai

  How To Cancel Pending Windows 7 Updates? The key is pending. The shutdown button has the windows update symbol meaning that there are updates that were selected to be installed which were download and will be installed upon shutdown. The only thing is that my machine will no longer boot if I let it install those updates! They are incompatible with a driver needed in the system and I did not found out until too late. The system admin used a recovery disk to get back to the previous restore point, only the updates are now pending, so I need to cancel those before the machine shutdowns next.

  Read the article

• How to determine non-movable files in Windows 7?

  - by David

  Is there a way to determine which unmovable files are preventing Shrink Volume from releasing the full potential free space? Background: I have a 90 GB partition with Windows 7 on it, and 60 GB free space. I want to shrink it down to about 40 GB, and use the reclaimed 50 GB for a separate data partition. The Shrink Volume tool in Disk Management is only willing to give me 8 GB back. My understanding is that this is because of immovable files. I've followed the instructions found here, which involved disabling hibernation, pagefile, system restore, kernal dump, making sure all related files were deleted, and defrag'ing. I have successfully followed those same instructions before on this same drive, and partitoned the original 150 GB space into 90 GB and 60 GB, but I'm not so lucky this time.

  Read the article

• Installing then Running VMware or VirtualBox causes my Windows 7 PC to not boot up after shutting down?

  - by Rick

  At my work I am provided with a Windows 7 PC but I am a programmer and Windows gives me problems for doing some types of development so I want to have a virtual Ubuntu Linux machine that I can use for some things. However, I have tried with both VirtualBox and VMware and I am able to install the latest Ubuntu and run it but then when I try to restart / start the computer after it was shut down, I am unable to boot into Windows normally and end up having to go into Safe mode and then use the system restore to get my system back up and working. I am puzzled by this and would appreciate if anyone has any idea why it would be doing this, I have searched on this but can't find anything. Thanks for any advice

  Read the article

• Creating ISO image of NTFS partition in Ubuntu

  - by Pappai

  Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an ISO image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

  Read the article

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• Stepmania + KDE4 = sound problem

  - by picca

  I cannot manage to get KDE4 + stepmania working. If I run StepMania I always get: StepMania 3.9 Log starting 2010-12-24 14:52:48 Loading window: gtk OS: Linux ver 020636 Crash backtrace component: x86 custom backtrace Crash lookup component: dladdr Crash demangle component: cxa_demangle Runtime library: glibc 2.11.2 Threads library: NPTL 2.11.2 TLS is available ALSA: Advanced Linux Sound Architecture Driver Version 1.0.23. ALSA Driver: 0: HDA ATI SB [SB], device 0: STAC92xx Analog [STAC92xx Analog], 0/1 subdevices avail ALSA Driver: 0: HDA ATI SB [SB], device 1: STAC92xx Digital [STAC92xx Digital], 1/1 subdevices avail Couldn't load driver ALSA: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver ALSA-sw: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver OSS: RageSound_OSS: Couldn't open /dev/dsp: Device or resource busy Language: english Theme: default Error: Couldn't find a sound driver that works I found that in StepMania/Data/StepMania.ini I should add following line: SoundDevice=default That enables me to run StepMania, but I don't have any sound. Which is pretty bad for an application like this one. I'm quite sure that the problem is in phonon that is blocking the audio device to which StepMania needs to access directly. I think that I can fix this if I run other (lighter) window-manager than KDE4. But that is not a solution occasional linux user. Do I have any chance to get StepMania under KDE4 completely working?

  Read the article

• Windows Home Server is showing signs of death

  - by Guy

  I have a Windows Home Server (HP EX485 MediaSmart Home Server) and it started acting up about 4 weeks ago and a few days ago complained of a corrupt database and would I like to try and recover it? Yes, I would but I ended up losing all backups. I have to reboot it frequently for the client machines to be able to see it. I have 4 hard disks in the computer. I suspect that the primary hard disk is going bad. My first question: How can I confirm if it's going bad or not? I'm thinking about removing the primary disk and replacing it with one of the others and reloading the OS with the server restore disk. I know that I'll lose everything (but I recently did anyway) but is there any other reason why I should not do this?

  Read the article

• Backup of whole harddrive during full operation with Acronis True Image Home 2010

  - by testing

  Currently I'm creating a backup of one of my hard drives. It's my main hard drive, where the operating system is running on. Because the backup is done during full operation I'm asking me if the backup really includes all files (registry, ...). Can I restore the backup on another hard drive and then run the operating system again without problems? Normally I would say that you have to boot from a CD (without running OS) to make a backup. I made a Google research but I didn't found my case so far.

  Read the article

• Why has the NoScript icon disappeared?

  - by Peter Mortensen

  Why has the appearence of NoScript changed? Using Noscript in Firefox (Microsoft Windows): Until now there has been an icon (the S icon) in the lower right of the screen. But now there is an button instead with the text "Options". Left clicking this button seems to bring up the menu as right clicking the old icon. Can I restore the previous state? Is there an auto-update function in NoScript and if so could it have caused the change? If it exists can the auto-update function be disabled? Platform: Firefox 3.0.6, NoScript 1.9.0.6, Windows XP 64 bit, 8 GB RAM.

  Read the article

• Apache Issues on Windows Server 2008

  - by dlackey

  I'm looking to reinstall Apache 2.2.25 since I continue to get these errors in the Windows Application log every 2-5 minutes: Faulting application name: httpd.exe, version: 2.2.25.0, time stamp: 0x51dd049c Faulting module name: zlib1.dll, version: 1.2.3.0, time stamp: 0x4790446a Exception code: 0xc0000005 Fault offset: 0x00002bad Faulting process id: 0x38e8 Faulting application start time: 0x01cfbfd70cdfbc4f Faulting application path: C:\Apache2\bin\httpd.exe Faulting module path: C:\Apache2\bin\zlib1.dll Report Id: 745f20de-2bca-11e4-bd5d-002590f28d7e If the new install doesn't work or if there are some "issues", can I simply restore the Apache2 directory from backup and then I'll just be back where I started? I thought about just renaming the current install to something like c:\apache2_old and if something fails, I can delete the new install and rename c:\apace2_old back to c:\apache. What do you all think?

  Read the article

• Get Matrox Millenium video card working in Ubuntu 9.10

  - by wcoenen

  I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

  Read the article

• Will Windows 7 setup overwrite Windows 8 and Ubuntu boot records?

  - by Jens

  I have Windows 8 and Ubuntu installed, both an the same physical hd (2 partitions). Windows 8 was installed after a format, Ubuntu afterwards. I used EasyBCD to setup the boot records and the boot menu order. I want to install Windows 7 as a third operating system and just add its boot record with EasyBCD. Will there be any unwanted behavior when I install it on a third partition? I already have 100 GB of unallocated space on the disk, though have not yet made the partition. I red on this site that I should install the oldest OS first, but than I would have to do a format and start again from scratch (which I clearly do not want to do). edit: On this site, the opposite is claimed, saying it's also possible to install Windows 7 after Windows 8. However, it will restore a Windows 7 boot menu instead one of Windows 8.

  Read the article

• There is a problem with the Office database

  - by RomanT

  After a TimeMachine restore; office 2011 is having kittens over permissions it would seem. Having attempted a 'repair' out of Disk Utility, am still seeing: 'there is a problem with the Office database' upon startup. After which Word/Excel work without issues. Outlook on the other hand won't even start. Given the obvious message here "You do not have write access to the Outlook application folder" - where is the DB located to check?! Ideas ? Thank you

  Read the article

• Language bar switched input types on me.

  - by Elijah

  I learned Japanese, but I'm not native to Japan, so I never had a Japanese keyboard. I used to use the language bar to go back and forth between English and Japanese, simply typing the words in romaji and having windows convert it into either hiragana, katakana and sometimes Kanji. Suddenly, my input type changes. I am no longer able to simply type in English, it changed my keyboard into a native Japanese keyboard, and what's worse it doesn't even allow me to write in hiragana, which I would need way more than katakana. Can anyone tell me how to restore it to the old setting where I simply chose what the output dialect would be, and typed the words phonetically in english and have it translate the sounds for me into japanese characters?

  Read the article

• Upgrade no raid server to raid

  - by AZee

  I have just learned that our PDC has a single drive with 2 partitions. I also know that this drive has bad blocks as recorded in the event log. What I would like to do is to convert this to a RAID solution with a nice balance between economy and performance. I will admit that I have only configured servers with RAID from scratch, and have no experience upgrading an existing system into a RAID system. In fact, I'm not sure it is even possible. Since this is the PDC for 350+ workstations downtime is important. I'd like to hear from other System Administators how they would tackle this and their recommendations for all devices. At this time it seems to me that I can replace the existing drive and then restore from backup or install a controller, drives, configure the RAID an basically start from scratch. Thank you for taking your time. ~AZee

  Read the article

• Windows 7 Start Menu Items Missing

  - by petebob796

  If I click the start menu - All Programs almost all my installed programs seem to be missing from the start menu despite some of them being on the initial regulalry used screen. As far as I can see this has happened within the last week possibly after windows updates installed. Does anyone else have this issue? Anyone know a fix? I have looked in all the locations I can think of for start menu items and can't see them anywhere so it does actually look like they have been removed. I tried as system restore that didn't work.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >