Search Results

Search found 13082 results on 524 pages for 'background music'.

Page 308/524 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• Ubuntu 11.04 Static IP doesn't take

  - by mrduclaw

  I'm trying to set a static IP address in Ubuntu 11.04. I did a server install. I edited my /etc/network/interfaces file to include: auto eth0 iface eth0 inet static address 10.0.0.100 netmask 255.255.255.0 gateway 10.0.0.1 When I do a /etc/init.d/networking restart this appears to take. After awhile though, that 10.0.0.100 will turn into something dished out by the DHCP server. My problem appears to be similar to this: Ubuntu intrepid - static IP networking keeps restarting with DHCP But I don't have Gnome installed. Is there anything else that's running in the background that could be doing this? And if so, how do I disable it?

  Read the article

• Why does an ampersand in URL cause failure of some command in Mac OS X Terminal?

  - by congliu

  Why does an ampersand in URL cause failure of the following command? I want to open a web page by running Safari in Terminal, placing the URL as an argument. This works as expected: open -a safari "http://endic.naver.com/search.nhn?sLn=en&searchOption=all&query=good" But once the quotes being removed, it wouldn't work as expected: open -a safari http://endic.naver.com/search.nhn?sLn=en&searchOption=all&query=good Instead, it returns: [3] 5395 [4] 5396 [1] Done open -a safari http://endic.naver.com/search.nhn?sLn=en [2] Done searchOption=all Seems like ampersand in the URL was treated as "running previous command in the background", though there is no space following the ampersand in the URL.

  Read the article

• Running Windows XP with VMWare Fusion from a Fujitsu-Siemens recovery disk.

  - by Time Machine

  I have installed a trail version from VMWare Fusion. I had (sold now) a very old Fujitu-Siemens laptop (from around 2001) which came with two recovery disks (which I still have :P). One recovery disk is a Windows XP installer, the other is a disk with drivers and useless software you will never use and run permanently in the background. If I install Windows XP from the recovery disk (which did not contain any software except what comes with Windows XP, for as far as I know), will it run in VMWare Fusion? Or do I really have to buy/pirate a new Windows XP installation disk? Thanks. Yes, I need XP, not 7.

  Read the article

• Should I be using Windows Live Mail or Outlook?

  - by Relequestual

  I have been using Windows Live Mail now for a few years, and like the interface, ect ect. Just having a clear out of my domains emails, and think I should set up the other accounts properly. I have Outlook (using 2010 beta), so I thought maybe I should use it? Can anyone give me reasons for and against both bits of software? I did look for some comparisons between the two, but can't find much. Plus I always value up to date information. Bit more background: Using 1 Hotmail and 5 IMAP accounts (possibly more). Use a Windows Mobile. Any way I can sync the calendar and tasks OTA to my hotmail and back down to outlook? I know this is probably more a discussion question (sorry), but I would argue that it can be answered, as it is a question relating to what I myself, in my circumstances would be best. Thanks in advance. Rel

  Read the article

• How do I fix Windows 7 rotating wallpaper?

  - by acmshar

  On my PC with Windows 7 Professional x64, I have a folder of images that I use for my theme. Under Personalization (right click on desktop - Personalize) it is the only theme under 'My Themes'. Repeatedly, I have noticed the background has stopped rotating and is stuck on one image. When I go to Personalization, I notice a new theme has been created called 'Unsaved Theme' with one image from my folder and is the current theme. To fix this, I set the theme back to my folder and delete the single image theme. How can I prevent this from reoccurring as it has happened multiple times?

  Read the article

• In Process Explorer is it possible change scaling of activity graph the be able to further analyse graph?

  - by therobyouknow

  Is there any way to zoom in, in the System Internals Process Explorer graph? Background I'm trying to work out why my PC freezes/locks up for about a second (the pointer does not move) every so often. This has only been happening for the last 2 days. There is a very narrow spike associated with the freeze, but it's hard to hover over it an analyse what is causing it. My PC spec: ThinkPad X201S 1440x900 i7 2.0GHz 8Gb RAM, 256GB Samsung 840Pro SSD, Windows 8.1 Pro 64bit CalDigit USB 3.0 ExpressCard 34, Ultrabase X200 with DisplayPort to HDMI

  Read the article

• Logging in over ssh in a different session?

  - by Jordan Reiter

  I don't know exactly what the correct term is, but I notice if I log in to a remote SSH server, then close the window, open a new one, and log into that server again, my bash history and user processes appear to be different. For instance, if I started a background process I can't get back into it, or something I typed won't show up in my bash history. The problem is for some reason occasionally something happens to my remote session and instead of being disconnected the session just hangs; I have to close the window and open a new one to reconnect. As a result sometimes it means a long running process basically is "lost" since I can't get back into it. Is there any way to set it up so that when I log back in I log back in to the same "session"? This is using OS X Terminal.

  Read the article

• Should I install an AV product on my domain controllers?

  - by mhud

  Should I run a server-specific antivirus, regular antivirus, or no antivirus at all on my servers, particularly my Domain Controllers? Here's some background about why I'm asking this question: I've never questioned that antivirus software should be running on all windows machines, period. Lately I've had some obscure Active Directory related issues that I have tracked down to antivirus software running on our domain controllers. The specific issue was that Symantec Endpoint Protection was running on all domain controllers. Occasionally, our Exchange server triggered a false-positive in Symantec's "Network Threat Protection" on each DC in sequence. After exhausting access to all DCs, Exchange began refusing requests, presumably because it could not communicate with any Global Catalog servers or perform any authentication. Outages would last about ten minutes at a time, and would occur once every few days. It took a long time to isolate the problem because it was not easily reproducible and generally investigation was done after the issue resolved itself.

  Read the article

• How to prevent Google Toolbar being installed in Portable Firefox?

  - by HyperHacker

  Recently, the campus computers installed Google Toolbar in Firefox. Now, I have no use for this toolbar, so I don't want it there. For that and other reasons, I installed Portable Firefox on a USB stick and use that instead. Somehow, when I log into one of these machines and start Portable Firefox, guess what? "Thank you for installing Google Toolbar." No! I don't want some IT guy choosing what extensions to install on my personal Firefox on my USB stick. I can uninstall it but next time I log in, it comes right back. I suppose PF is for some reason reading things from the local disk, or there's some kind of background process installing it? How do I prevent extensions being installed without my consent?

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• why is this happening?-"dhcpcd will not work correctly unless run as root"

  - by user330317

  i have installed archlinux and gnome on virtualbox. had no problem connecting to internet but now after installing gnome and rebooting there is no internet connection after following instructions from archwiki,i have tried . but i cant figure out the problem please help. host-63drhd% sudo netctl status enp0s3 ? [email protected] - Networking for netctl profile enp0s3 Loaded: loaded (/usr/lib/systemd/system/[email protected]; static) Active: inactive (dead) Docs: man:netctl.profile(5) host-63drhd% sudo netctl enable enp0s3 Profile 'enp0s3' does not exist or is not readable host-63drhd% sudo dhcpcd dhcpcd[1486]: sending commands to master dhcpcd process host-63drhd% dhcpcd dhcpcd[1543]: control_open: Permission denied dhcpcd[1543]: dhcpcd will not work correctly unless run as root dhcpcd[1543]: open `/run/dhcpcd.pid': Permission denied dhcpcd[1543]: control_start: Permission denied dhcpcd[1543]: version 6.3.2 starting dhcpcd[1543]: enp0s3: if_init: Permission denied dhcpcd[1543]: enp0s8: if_init: Permission denied dhcpcd[1543]: no valid interfaces found dhcpcd[1543]: no interfaces have a carrier dhcpcd[1543]: forked to background, child pid 1544

  Read the article

• how to reduce size (disk space) of windows 8?

  - by humanityANDpeace

  This questions is about what things I can do to reduce the size that Windows 8 uses. Background For example: At present and with only one programm installed (MS Access 2007) I have a about 15GB of my harddisk space used. I have little space (its a 17 GB partition on a SSD disk). I would like solutions that are like: Remove files not really needed (drivers not actually needed in the system) Help files not really needed (documentation) pagefile.sys (assuming I would have 4GB ram and no real need for swaping) hiberfil.sys (used for hibernate and sleep... I need that. though I would regain about 4GB space) At best I would like to delete mostly files that I would most likely not need. Though I have no good idea where to start there. Since my setup (hardware will not change) I would be willing to delete all the drivers that windows 8 has for hardware I do not have.... The question is about ways to reduce the space that Windows 8 uses.

  Read the article

• What is making iTunes stop playing when my computer idles?

  - by OwenP

  I've got a rare weekend with nothing to do, so I'm getting some housework done. I have iTunes playing for some background noise. Every 20 minutes or so, it just stops playing; if I move the mouse it starts again. I'm on Windows 7 64-bit. My power settings have my monitor turning off at 10 minutes and hard drives at 20. Both sleep and hibernate are disabled. "Aha!", you say, "Clearly when the hard drive is turned off iTunes is stopping!" Not so. I fiddled with the settings and changed them to make the hard drive sleep in 5 minutes, and iTunes kept playing for the 7 minutes I watched it. I'm currently trying to see what happens if I set the hard drive to never turn off, but I'd prefer to leave it at 20 minutes to save minor amounts of energy. What other settings could be the culprit?

  Read the article

• Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

  - by user26192

  Hi, I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

  Read the article

• Gmail - Ways to have more than 20 items per page in the search results

  - by Andrei

  Gmail has the notorious limitation of 20 results per page when searching your mail. Is there an extension (Chrome - preferable, Firefox, etc.) that can fix this (i.e. allow more than 20 items per page)? Based on my experience this should be entirely doable (have the extension move across pages in the background and then collect the results). Is there an extension that can already do this? I'm asking because I couldn't find one.

  Read the article

• Domain Hosting, DNS/NS Management [closed]

  - by ledy

  What criteria do you have for choosing the right provider for registering a domain? (not hosting, only the domain) So far, I can only see the different pricing and features of the DNS manager but have no idea what I have to pay attention in addition to this. How to know about the quality of the provider's nameserver and could there be differences in speed concerns. Background: The hosting itself incl. webspace, server etc. is separate from the domain and I am not going to book the domain with the same hoster as the webspace/server hoster.

  Read the article

• Prevent specific applications from being run as administrator

  - by Unsigned

  Background Most installation toolkits have the ability to launch, automatically or otherwise, external programs after installation. This is often appears in the installer via such options as "Show readme", or "Start program". Issue The problem is, many of these installers are poorly coded, and do not drop permissions appropriately. For example, starting the application automatically, or opening the application's homepage in the browser, often results in launching the application or browser with the installer's Administrative privileges, or a "High" UAC integrity level! This has the potential to open up security breaches, by opening up the installed application, or a web page (and possibly browser add-ons), that are now running with elevated permissions. (This is the reason I strongly recommend never choosing auto-launch options when installing software.) Question The question is: Is there a way to prevent certain applications (such as a web browser) from ever being launched with Administrative privileges, i.e., an automatic drop-privilege?

  Read the article

• Cannot run gnome-session

  - by Brian

  I'm having issues running an X Windows session on a RHEL5 64-bit server - whenever I execute the command "gnome-session &", the process goes into the background but nothing happens. I have Exceed installed on my Windows machine which is running when I try to start the gnome-session. I've tried just starting firefox by itself instead of the whole gnome session, but it doesn't work either. Any suggestions? BTW, here's the error message I get when I try to start firefox: firefox: Fatal IO error 104 (Connection reset by peer) on X server localhost:10.0.

  Read the article

• Book Recommendations for Technical/Solutions Architecture [closed]

  - by giant_squid

  I wish to learn more about Technical and Solutions Architecture. Specifically, I'm concerned with designing HA, Fault-Tolerant Scalable web-based solutions (enough buzzwords ;-). Its a topic I'm familiar with on a technical level having worked as a sysadmin, but I don't know all the buzzwords Architects use and have to brush up on my UML and diagram techniques. I would like a book that describes what architecture is as a discipline and explores standard design patterns, and some do's and don'ts. Do you have any recommendations? I apologise if this sounds vague, its because I am still learning what Architecture is as a discipline having come from a sysadmin background. To be 100% clear I'm looking for books or websites that give broad overviews of what System Design patterns exist and how the discipline works. Thanks Instead of closing the question maybe you could comment on what exactly about it you don't like.

  Read the article

• Setting correct Content-Type sent from Wordpress, on Apache server

  - by eoinoc

  I need help pointing me in the right direction for setting the ContentType returned by Apache for content produced by WordPress. I'm having trouble figuring out why WordPress is returning incorrect headers. Issue The specific problem is that our Wordpress blog pages are being downloaded as a file rather than displayed by Internet Explorer and Chrome v21. Content-Type: application/x-gzip is being returned by the server. I'm told that I should expect Content-Type: text/html. Background The URL is http://www.bitesizeirishgaelic.com/blog/.

  Read the article

• Word 2010 Style Sets and Multilevel Lists

  - by Stevia

  In Word 2010, how can you create quick style sets that include multilevel lists (include being the operative word)? As background, I have created a set of styles for a long agreement form and assigned them to levels in a certain custom multilevel list. I then also saved those styles as a quick style set called Long Agreement. I have saved those styles in my normal template. That all works fine for assigning styles to a Long Agreement. What I'd like to do next is create a second style set called Short Agreement. I will assign certain styles to that style set. The issue is that I don't see how to tie a different custom multilevel list to those Short Agreement styles. When I click on Change Styles, Short Agreement [style set], and I apply those styles, how can I get it to automatically use the multilevel list that I assign to short agreements?

  Read the article

• Prevent applications from being run as administrator

  - by Unsigned

  Background Most installation toolkits have the ability to launch, automatically or otherwise, external programs after installation. This is often appears in the installer via such options as "Show readme", or "Start program". Issue The problem is, many of these installers are poorly coded, and do not drop permissions appropriately, for example, opening the application's homepage in the browser... launching the browser with the installer's Administrative privileges, or a "High" UAC integrity level. This has the potential to open up security breaches, by opening up a webpage (and possibly browser addons), that are now running with elevated permissions. Question The question is: Is there a way to prevent certain applications (such as a web browser) from ever being launched with Administrative privileges, i.e., an automatic drop-privilege?

  Read the article

• Win 7: How can I resize a window to make it much bigger than my screen?

  - by RexE

  I have a window that I'd like to make much bigger than my physical screen (explanation of why below). I hit Alt+Space, M, and then press the Up arrow to move the title bar above the physical top of my screen. However, when I press Enter to set it, the title bar snaps back to the top of my screen. How can I prevent this from happening? Background: I want to get a hi-res image of a neighborhood map so that it can be printed to a poster. Google Earth has a "Save as JPG" feature, which will save the map in the window to a file. The bigger the window, the bigger the JPG; so, I'm trying to make the window as big as I can. Alternate suggestions welcome.

  Read the article

• Visual Studio 2012 intermittent lockup

  - by user1892678

  Visual Studio 2012 intermittently locks up on me. I notice that devenv.exe jumps to 50% CPU utilization. The CPU stays at this level for a few minutes and then drops. While its at 50% utilization I can still use the IDE. However, intermittently it stops responding (as though it was performing some sort of background process). It only lasts for a few seconds. Also this happens when debugging. I'm running under Windows 7 and I'm using Telerik controls. I've disabled add-ins and extensions and have had no success. Any ideas would be appreciated? Thanks

  Read the article

• Continue process after closing terminal?

  - by Jakobud

  Recently, I tried to unzip a 30 gig zip file on a remote system using Putty. As the long unzipping process continued, I closed Putty, assuming that the process would just continue to run on the remote machine. When I came back later and logged back into the machine again, I realized that the process must have stopped only part way through when I closed Putty. I wasn't expecting that to happen. My question is, how do I prevent this problem? Can I somehow fire off a process in the background? Or should just setup a one time cronjob that will run the process for me?

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >