Search Results

Search found 20573 results on 823 pages for 'pretty big scheme'.

Page 308/823 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315 | Next Page >

Day 3 - XNA: Hacking around with images

- by dapostolov

Yay! Today I'm going to get into some code! My mind has been on this all day! I find it amusing how I practice, daily, to be "in the moment" or "present" and the excitement and anticipation of this project seems to snatch it away from me frequently. WELL!!! (Shakes Excitedly) Let's do this =)! Let's code! For these next few days it is my intention to better understand image rendering using XNA; after said prototypes are complete I should (fingers crossed) be able to dive into my game code using the design document I hammered out the other night. On a personal note, I think the toughest thing right now is finding the time to do this project. Each night, after my little ones go to bed I can only really afford a couple hours of work on this project. However, I hope to utilise this time as best as I can because this is the first time in a while I've found a project that I've been passionate about. A friend recently asked me if I intend to go 3D or extend the game design. Yes. For now I'm keeping it simple. Lastly, just as a note, as I was doing some further research into image rendering this morning I came across some other XNA content and lessons learned. I believe this content could have probably been posted in the first couple of posts, however, I will share the new content as I learn it at the end of each day. Maybe I'll take some time later to fix the posts but for now Installation and Deployment - Lessons Learned I had installed the XNA studio (Day 1) and the site instructions were pretty easy to follow. However, I had a small difficulty with my development environment. You see, I run a virtual desktop development environment. Even though I was able to code and compile all the tutorials the game failed to run...because I lacked a 3D capable card; it was not detected on the virtual box... First Lesson: The XNA runtime needs to "see" the 3D card! No sweat, Il copied the files over to my parent box and executed the program. ERROR. Hmm... Second Lesson (which I should have probably known but I let the excitement get the better of me): you need the XNA runtime on the client PC to run the game, oh, and don't forget the .Net Runtime! Sprite, it ain't just a Soft Drink... With these prototypes I intend to understand and perform the following tasks. learn game development terminology how to place and position (rotate) a static image on the screen how to layer static images on the screen understand image scaling can we reuse images? understand how framerate is handled in XNA how to display text , basic shapes, and colors on the screen how to interact with an image (collision of user input?) how to animate an image and understand basic animation techniques how to detect colliding images or screen edges how to manipulate the image, lets say colors, stretching how to focus on a segment of an image...like only displaying a frame on a film reel what's the best way to manage images (compression, storage, location, prevent artwork theft, etc.) Well, let's start with this "prototype" task list for now...Today, let's get an image on the screen and maybe I can mark a few of the tasks as completed... C# Prototype1 New Visual Studio Project Select the XNA Game Studio 3.1 Project Type Select the Windows Game 3.1 Template Type Prototype1 in the Name textbox provided Press OK. At this point code has auto-magically been created. Feel free to press the F5 key to run your first XNA program. You should have a blue screen infront of you. Without getting into the nitty gritty right, the code that was generated basically creates some basic code to clear the window content with the lovely CornFlowerBlue color. Something to notice, when you move your mouse into the window...nothing. ooooo spoooky. Let's put an image on that screen! Step A - Get an Image into the solution Under "Content" in your Solution Explorer, right click and add a new folder and name it "Sprites". Copy a small image in there; I copied a "Royalty Free" wizard hat from a quick google search and named it wizards_hat.jpg (rightfully so!) Step B - Add the sprite and position fields Now, open/edit Game1.cs Locate the following line: SpriteBatch spriteBatch; Under this line type the following: SpriteBatch spriteBatch; // the line you are looking for... Texture2D sprite; Vector2 position; Step C - Load the image asset Locate the "Load Content" Method and duplicate the following: protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); // your image name goes here... sprite = Content.Load<Texture2D>("Sprites\\wizards_hat"); position = new Vector2(200, 100); base.LoadContent(); } Step D - Draw the image Locate the "Draw" Method and duplicate the following: protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(SpriteBlendMode.AlphaBlend); spriteBatch.Draw(sprite, position, Color.White); spriteBatch.End(); base.Draw(gameTime); } Step E - Compile and Run Engage! (F5) - Debug! Your image should now display on a cornflowerblue window about 200 pixels from the left and 100 pixels from the top. Awesome! =) Pretty cool how we only coded a few lines to display an image, but believe me, there is plenty going on behind the scenes. However, for now, I'm going to call it a night here. Blogging all this progress certainly takes time... However, tomorrow night I'm going to detail what we just did, plus start checking off points on that list! I'm wondering right now if I should add pictures / code to this post...let me know if you want them =) Best Regards, D.

Read the article
Moving from Tortoise to TFS

- by MarkPearl

The Past A few years ago my small software company made the jump from storing code on a shared folder to source code control. At the time we had evaluated a few of the options and settled on Tortoise SVN. The main motivation for going the SVN route was that we found a great plugin for Visual Studio that allowed us to avoid the command prompt for uploading changes (like I said we are windows programmers… command prompt bad!! ) and it was free. Up to now we have been pretty happy with SVN as it removed many of the worries that I had about how safe my code was on a shared folder and also gave us the opportunity to safely have several developers work on the same project at the same time. The only times when we have been unhappy has been when we have had SVN hell days – which pretty much occur when you are doing something out of the norm and suddenly SVN just won’t resolve conflicts or something along those lines. This happens once every 4 or 5 months and is not necessarily a problem caused directly by SVN – but a problem augmented by SVN. When you have SVN hell days you want to curse SVN! With that in mind I recently have been relooking at our source code control. I have explored using GIT and was very impressed by it and have also looked at TFS. From a source code control perspective I don’t want to get into a heated discussion on which one is better – but I do want to mention that I wear two hats in my organization – software developer & manager, and with the manager hat on I tend to sway the TFS route. So when I was given a coupon to test DiscountASP.Net Team Foundation Server Service for a year, I thought it was the perfect opportunity to try TFS in a distributed environment and also make the first step towards having an integrated development management system. Some of the things that appeal to me about DiscountASP’s offering are the following… Basic management / planning facilities like to do lists inside Visual Studio Daily backup of data on the server – we are developers, not IT managers and so the more of this I could outsource the better Distributed solution – all of us work remotely and so this was a big one as well. Registering and Setting Up with DiscountASP.NET The whole registration process was simple and intuitive. The web interface is not the most visually impressive one, but it is functional and a few seconds after I clicked the last submit button a email was sitting in my inbox giving me my control panel username and suggesting that I read the “Getting Started” article. The getting started article was easy to read and understand so no complaints there either. Next to set my dev environment to work. With a few references to the getting started article I had completed the whole setup process in a matter of minutes. Ten minutes after initiating the whole thing I was logged into VS2010 and creating my first TFS project. With the service that I signed up for, I have access for 5 users – which is sufficient for my internal needs. So from what I can tell, to set the rest of us up on the system I just need to supply them with their user credentials and url. My Concerns Resolved 1) Security So, a few concerns I had about the service. First and foremost – is it secure? I would hate for someone to get access to our code and the whole idea of putting it up on the internet is a concern for me. Turning to the Knowledge Base on the DiscountASP website this is one of the first question I can see answered. According to them it is secure. I have extracted their comment below regarding this. Our TFS hosting service is secure. We only accept HTTPS connections ensuring that any client-server data transmission is encrypted. At the network level, all of our systems are protected by multiple Juniper firewalls, Tipping Point's Intrusion Detection System (see Tipping Point's case study of our use here), and we also employ DDoS mitigation to add extra layers of security. Additionally, physical access to the servers is tightly restricted. Please see the security section of this Knowledge Base article for further details. 2) Web Portal Access The other big concern I have is regarding web portal access. In the ideal world I would like to be able to give my end users access to a web portal for reporting bugs etc. When I initially read through the FAQ of the site it mentioned that there was web portal access – but from what I can see this is just for “users”. Since I am limited to 5 users for the account, it would not be practical to set up external users that we could get feedback from on bugs etc. I would be interested if this is possible – and if so if someone could post it in the comments it would be much appreciated. If this isn’t possible, it is a slight let down as we rely heavily on end user feedback to get feedback and it would have been ideal to have gotten this within the service. Other than those two items, I didn’t have any real concerns that were unresolved. So where do I go from here? So time passed by from the initial writing of this post and as work whirred in and out of my inbox I have still not had a proper opportunity to give the service a test run. Recently though things have began to slow down and then surprise surprise I had another SVN Hell day. With that experience I had a new found resolve to get our team on TFS and so today we are going to start to use the service as a team. I am hoping that I do not have TFS hell days – but if I do, I will be sure to write about them. In short - the verdict is still out on whether this service is going to be invaluable to my business or whether it will create more headaches than it is worth BUT I am hopping it will be an invaluable service. I will only really be able to determine that in a few months… till then!

Read the article
Alcatel-Lucent: Enterprise 2.0: The Top 5 Things I would Do Over

- by Kellsey Ruppel

Happy Monday! Does anyone else feel as if the weekend went entirely too quickly? At least for those of us in the United States, we have the 4th of July Holiday next week to look forward to This week on the blog, we are going to focus on "WebCenter by Example" and highlight best practices from customers and partners. I recently came across this article and I think this is a great example of how we can learn from one another when it comes to social collaboration adoption. Do you agree with Jem? What things or best practices have you learned in your organizations? By Jem Janik, Enterprise community manager, Alcatel-Lucent Not so long ago, Engage, the Alcatel-Lucent employee social network and collaboration platform, celebrated its third birthday. With more than 25,000 members actively interacting each month, Engage has been a big enough success that it’s been the subject of external articles, and often those of us who helped launch it will go out and speak about what aspects contributed to that success. Hindsight is still 20/20 and what it takes to successfully launch an enterprise 2.0 community is fairly well-known now. Today I want to tell you what I suspect you really want to know about. As the enterprise community manager for Engage, after three years in, what are the top 5 things I wish we (and I mostly mean me) could do over? #5 Define your analytics solution from the start There is so much to do when you launch a community and initially growing it without complete chaos is quite a task. It doesn’t take too long to get to a point where you want to focus your continued efforts in growing company collaboration. Do people truly talk across regional boundaries or have we shifted siloed conversations to a new platform. Is there one organization that doesn’t interact with another? If you are lucky you’ll have someone in your community team well versed in the world of databases and SQL queries, but it takes time to figure out what backend analytics data actually means. Professional support can be expensive and it may be hard to justify later as it typically has the community manager as the only main customer. Figure out what you think you’ll want to know and how to get it early on. The sooner the better even if it doesn’t seem that critical at the time. #4 Lobbies guide you to the right places One piece of feedback that comes up more and more as we keep growing Engage is it’s hard to find stuff, or new people are not sure where to start. Something we’re doing now is defining some general topic areas of interest to be like “lobbies” into the platform and some common hashtags to go with them. I liken this to walking into a large medical or professional building for the first time. There are hundreds of offices, and you look to a sign in the lobby to get guided to the right place for you. We’re building that sign for members now, but again we missed the boat as the majority of the company has had their initial Engage experience. #3 Clean up, clean up, clean up Knowledge work and folksonomies are messy! The day we opened the doors to Engage I would have said we should keep everything ever created in Engage with an argument that it was a window into our collective knowledge so nothing should go. Well, 6000+ groups and 200,000+ pieces of content later, I’ve changed my mind. As previously mentioned, with too much “stuff” the system can be overwhelming to new members and it makes it harder to get what you’re looking for. Do we need that help document about a tool we no longer have? NO! Do we need that group that had 1 document and 2 discussions in the last two years? NO! Should we only have one group about a given topic instead of 4? YES! Last fall, Engage defined a cleanup process for groups not used for a long time. We also formed a volunteer cleaning army who are extra eyes on the hunt for “stuff” that should be updated, merged, or deleted. It’s better late than never, but in line with what’s becoming a theme I wish these efforts had started earlier. #2 Communications & local community management One of the most important aspects of my job is to make sure people who should be talking to each other are actually doing it. Connecting people to the other people they should know, the groups they should join, a piece of content that shouldn’t be missed. I have worked both inside and outside of communications teams, and they are the best informed people in your company. They know when something big is coming, how it impacts employees, how it fits with strategy, who else knows more, etc. Having communications professionals who are power users can help scale up community management because they are already so well connected. They also need to have the platform skills to pay attention without suffering email overload, how to grab someone’s attention, etc. I wish I’d had figured this out much earlier. If I had I would have groomed more communications colleagues into advocates and power members right at the start. #1 Grooming advocates vs. natural advocates I’ve just alluded to this above already. The very best advocates are those who naturally embrace your platform and automatically start to see new ways to work within it. Those advocates seem to come out of the woodwork naturally since some of them are early adopters. Not surprisingly, our best advocates today are those same people who were willing to come kick the tires when the community was completely empty. Unfortunately, we didn’t get a global spread of those natural advocates. I did ask around when we first launched for other people who might be good candidates, but didn’t push too hard as there were so many other things to get ready. That was a mistake. If I could get a redo I would have formally asked for people to be assigned where there were gaps and groomed them into an advocate. Today as we find new advocates to fill the gaps, people are hesitant as the initial set has three years of practice are ahead of the curve power members; it definitely would have been easier earlier on. As fairly early adopters to corporate scale enterprise collaboration, there hasn’t been a roadmap to follow as we’ve grown Engage, which is part of the fun! It’s clear a lot of issues are more easily tackled the earlier you identify and begin to correct them, and I’ve identified the main five I wish I could redo. In the spirit of collaboration, I hope someone else learns from my mistakes! View the original article by Jem here.

Read the article
5 Ways Android Still Disappoints (Me)

- by TStewartDev

Let me make this clear: I'm annoyed with Apple. I don't like their current policies and I don't like where Steve Jobs is taking the company. In general, I don't like it when any one company gets too much control in a market. When that happens, the leading company dictates the game and as consumers, our options all but disappear. That said, I'm still going to buy a new iPhone next week. My Apple-hating friends seem to desperately want me to go Android instead, but frankly, it's not good enough for me, and here are the reasons why. The Modern WinMo One of the reasons that Microsoft has identified for Windows Mobile's rapid decline is the breadth of hardware. They exercised little control over manufacturer's implementations. In theory, that sounds great. We as consumers have lots of choice. In practice, though, it meant among other things that updates to the devices were left up to the manufacturers. As a result, that rarely happened. (I'm still bitter at Toshiba for leaving me hanging back in 2002.) And now, Google is doing the same thing with Android. Case in point: my wife has a Motorola Backflip that we bought in April. It was released in March. Motorola says it will get Android 2.1 "sometime in Q3". Great. Meanwhile, I pull down the latest version of iPhone OS (now iOS) and install it the same day it's released. You may say that I can't judge Android by one lazy manufacturer. Yup, I sure can. With Apple, my original iPhone has been supported perfectly for 3 years. With Android, I will have to wait for upgrades after Google releases them, possibly indefinitely. Not cool. AT&T We signed a new contract with AT&T in April to get my wife's phone. I've had a reasonable experience with them. I don't imagine my experience with Verizon would be any better, and I'm relatively confident that Sprint doesn't have the coverage it takes to work well for us. The fact is, AT&T, for whatever reason, doesn't have jack for Android phones. May not be Android's fault, but it's still a shortcoming that prevents me from having it just like the iPhone's exclusivity keeps some folks on other networks from having it. Innovation? What Innovation? Android has a nice dashboard and a great notification system and… nothing else original. I keep reading about how disappointing the iPhone is nowadays. "It has no innovation," people say. Who does? Android has modeled its behavior after the iPhone. That's fine, but if all you've got is a similar product and I'm invested both skill-wise and app-wise in my current platform, why should I change? Microsoft's new Windows Phone 7 looks somewhat innovative, and I'm pretty excited to see what they'll bring to the table, but that's another six months away, at least. I've got a 3 year old phone that has some annoying issues now (thanks to recent encounters with water). I need a new phone now. Is This Going to Work? There's no shortage of criticism of Apple over its App Store policies, and I've vented my own anger about it. However, I will give them credit: their screening of apps has done a great job of weeding out the crap and gives an excellent indication that the app will work on my device. How about Android? Nope. It might work on your phone. Maybe. You'll have to try it to see. Get burned by it? Well, write a nasty review to try to keep others from making the mistake you did. If you don't mind doing that stuff, then Android is the platform for you. Personally, I'd rather have a receptionist screening out the telemarketing and survey calls than hang up on them myself, but that's your call. Slow, Slowing, Slower All this yapping about multitasking. This is an area I've been on Apple's side from the beginning. Sorry folks, but this is the number one reason I hated Windows Mobile: the longer you use it, the slower it gets because it doesn't kill apps. I'm with Steve Jobs on this one: if you see a task manager, we're doing it wrong. I don't want to have to manually kill apps. I hate doing that on Windows let alone on a mobile device. To me, priority one should be keeping the device speedy. Waiting for your device to respond is unacceptable. Bonus! Taken from iPhone Letdown? 8 Things Apple Didn't Announce, here are my responses: 4G Yeah, let me know if your area actually has it. I live in Lincoln, Nebraska. No carrier is going to have 4G here for at least 3 years. Meanwhile, you still get to pay for it. Yay! Cloud iTunes/OTA Sync You got me here. Of course, whether or not your Android device will be able to do it is always a good question. 3G Video Chat You got me here, too. I'm sure you spent countless hours in front of your phone with video chat. Also, I can't wait for the "No Video Chat While Driving" laws. Mobile Hotspot This is a neat feature, but as the author points out, it's left up to the carrier whether to implement it or not. Pretty sure any Android phones that come to AT&T won't have this enabled in the foreseeable future. Is Verizon even allowing this? I just figured Sprint was because they're failing so hard at keeping customers. Free MobileMe I use Google's services with my iPhone. The only people I know who use MobileMe are Apple fanboys and fangirls. If you choose to pay for a service that you can get for free, that's your decision, not Apple's. Voice Input Voice input has been available on phones (even "dumb" phones) for years now. iPhone does have the ability, though limited. Why don't I hear people telling their phones what to do? Maybe because it's still easier to use your fingers than talk to it. Get back to me when this becomes an important feature. Free Navigation Maybe this will be a bigger deal to me now that I'm getting a phone with GPS, but when using my buddy's 3gs, Google maps has worked just fine. Maybe I just don't trust turn-by-turn navigation enough to want it. Dashboard The only legitimate complaint on this list, to me. iPhone's home screen is pathetic, doubly so for the iPad. What a waste of perfectly usable space. I also want to add notifications to this list. Android's notification panel is far superior to the iPhone's. I don't want to hunt all over my screen to find little red dots. Put 'em in one place, Apple.

Read the article
Metrics - A little knowledge can be a dangerous thing (or 'Why you're not clever enough to interpret metrics data')

- by Jason Crease

At RedGate Software, I work on a .NET obfuscator called SmartAssembly. Various features of it use a database to store various things (exception reports, name-mappings, etc.) The user is given the option of using either a SQL-Server database (which requires them to have Microsoft SQL Server), or a Microsoft Access MDB file (which requires nothing). MDB is the default option, but power-users soon switch to using a SQL Server database because it offers better performance and data-sharing. In the fashionable spirit of optimization and metrics, an obvious product-management question is 'Which is the most popular? SQL Server or MDB?' We've collected data about this fact, using our 'Feature-Usage-Reporting' technology (available as part of SmartAssembly) and more recently our 'Application Metrics' technology: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 28 19.0 8115 8115 MDB 114 77.6 1449 1449 (As a disclaimer, please note than SmartAssembly has far more than 132 users . This data is just a selection of one build) So, it would appear that SQL-Server is used by fewer users, but more often. Great. But here's why these numbers are useless to me: Only the original developers understand the data What does a single 'usage' of 'MDB' mean? Does this happen once per run? Once per option change? On clicking the 'Obfuscate Now' button? When running the command-line version or just from the UI version? Each question could skew the data 10-fold either way, and the answers only known by the developer that instrumented the application in the first place. In other words, only the original developer can interpret the data - product-managers cannot interpret the data unaided. Most of the data is from uninterested users About half of people who download and run a free-trial from the internet quit it almost immediately. Only a small fraction use it sufficiently to make informed choices. Since the MDB option is the default one, we don't know how many of those 114 were people CHOOSING to use the MDB, or how many were JUST HAPPENING to use this MDB default for their 20-second trial. This is a problem we see across all our metrics: Are people are using X because it's the default or are they using X because they want to use X? We need to segment the data further - asking what percentage of each percentage meet our criteria for an 'established user' or 'informed user'. You end up spending hours writing sophisticated and dubious SQL queries to segment the data further. Not fun. You can't find out why they used this feature Metrics can answer the when and what, but not the why. Why did people use feature X? If you're anything like me, you often click on random buttons in unfamiliar applications just to explore the feature-set. If we listened uncritically to metrics at RedGate, we would eliminate the most-important and more-complex features which people actually buy the software for, leaving just big buttons on the main page and the About-Box. "Ah, that's interesting!" rather than "Ah, that's actionable!" People do love data. Did you know you eat 1201 chickens in a lifetime? But just 4 cows? Interesting, but useless. Often metrics give you a nice number: '5.8% of users have 3 or more monitors' . But unless the statistic is both SUPRISING and ACTIONABLE, it's useless. Most metrics are collected, reviewed with lots of cooing. and then forgotten. Unless a piece-of-data could change things, it's useless collecting it. People get obsessed with significance levels The first things that lots of people do with this data is do a t-test to get a significance level ("Hey! We know with 99.64% confidence that people prefer SQL Server to MDBs!") Believe me: other causes of error/misinterpretation in your data are FAR more significant than your t-test could ever comprehend. Confirmation bias prevents objectivity If the data appears to match our instinct, we feel satisfied and move on. If it doesn't, we suspect the data and dig deeper, plummeting down a rabbit-hole of segmentation and filtering until we give-up and move-on. Data is only useful if it can change our preconceptions. Do you trust this dodgy data more than your own understanding, knowledge and intelligence? I don't. There's always multiple plausible ways to interpret/action any data Let's say we segment the above data, and get this data: Post-trial users (i.e. those using a paid version after the 14-day free-trial is over): Parameter Number of users % of total users Number of sessions Number of usages SQL Server 13 9.0 1115 1115 MDB 5 4.2 449 449 Trial users: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 15 10.0 7000 7000 MDB 114 77.6 1000 1000 How do you interpret this data? It's one of: Mostly SQL Server users buy our software. People who can't afford SQL Server tend to be unable to afford or unwilling to buy our software. Therefore, ditch MDB-support. Our MDB support is so poor and buggy that our massive MDB user-base doesn't buy it. Therefore, spend loads of money improving it, and think about ditching SQL-Server support. People 'graduate' naturally from MDB to SQL Server as they use the software more. Things are fine the way they are. We're marketing the tool wrong. The large number of MDB users represent uninformed downloaders. Tell marketing to aggressively target SQL Server users. To choose an interpretation you need to segment again. And again. And again, and again. Opting-out is correlated with feature-usage Metrics tends to be opt-in. This skews the data even further. Between 5% and 30% of people choose to opt-in to metrics (often called 'customer improvement program' or something like that). Casual trial-users who are uninterested in your product or company are less likely to opt-in. This group is probably also likely to be MDB users. How much does this skew your data by? Who knows? It's not all doom and gloom. There are some things metrics can answer well. Environment facts. How many people have 3 monitors? Have Windows 7? Have .NET 4 installed? Have Japanese Windows? Minor optimizations. Is the text-box big enough for average user-input? Performance data. How long does our app take to start? How many databases does the average user have on their server? As you can see, questions about who-the-user-is rather than what-the-user-does are easier to answer and action. Conclusion Use SmartAssembly. If not for the metrics (called 'Feature-Usage-Reporting'), then at least for the obfuscation/error-reporting. Data raises more questions than it answers. Questions about environment are the easiest to answer.

Read the article
How to Control Screen Layouts in LightSwitch

- by ChrisD

Visual Studio LightSwitch has a bunch of screen templates that you can use to quickly generate screens. They give you good starting points that you can customize further. When you add a new screen to your project you see a set of screen templates that you can choose from. These templates lay out all the related data you choose to put on a screen automatically for you. And don’t under estimate them; they do a great job of laying out controls in a smart way. For instance, a tab control will be used when you select more than one related set of data to display on a screen. However, you’re not limited to taking the layout as is. In fact, the screen designer is pretty flexible and allows you to create stacks of controls in a variety of configurations. You just need to visualize your screen as a series of containers that you can lay out in rows and columns. You then place controls or stacks of controls into these areas to align the screen exactly how you want. If you’re new in Visual Studio LightSwitch, you can see this tutorial. OK, Let’s start with a simple example. I have already designed my data entities for a simple order tracking system similar to the Northwind database. I also have added a Search Data Screen to search my Products already. Now I will add a new Details Screen for my Products and make it the default screen via the “Add New Screen” dialog: The screen designer picks a simple layout for me based on the single entity I chose, in this case Product. Hit F5 to run the application, select a Product on the search screen to open the Product Details Screen. Notice that it’s pretty simple because my entity is simple. Click the “Customize” button in the top right of the screen so we can start tweaking it. The left side of the screen shows the containership of controls and data bindings (called the content tree) and the right side shows the live preview with data. Notice that we have a simple layout of two rows but only one row is populated (with a vertical stack of controls in this case). The bottom row is empty. You can envision the screen like this: Each container will display a group of data that you select. For instance in the above screen, the top row is set to a vertical stack control and the group of data to display is coming from Product. So when laying out screens you need to think in terms of containers of controls bound to groups of data. To change the data to which a container is bound, select the data item next to the container: You can select the “New Group” item in order to create more containers (or controls) within the current container. For instance to totally control the layout, select the Product in the top row and hit the delete key. This will delete the vertical stack and therefore all the controls on the screen. The content tree will still have two rows, but the rows are now both empty. If you want a layout of four containers (two rows and two columns) then select “New Group” for the data item and then change the vertical stack control to “Two Columns” for both of the rows as shown here: You can keep going on and on by selecting new groups and choosing between rows or columns. Here’s a layout with 8 containers, 4 rows and 2 columns: And here is a layout with 7 content areas; one row across the top of the screen and three rows with two columns below that: When you select Choose Content and select a data item like Product it will populate all the controls within the container (row or column in a vertical stack) however you have complete control on what to display within each group. You can delete fields you don’t want to display and/or change their controls. You can also change the size of controls and how they display by changing the settings in the properties window. If you are in the Screen Designer (and not the customization mode like we are here) you can also drag-drop data items from the left-hand side of the screen to the content tree. Note, however, that not all areas of the tree will allow you to drop a data item if there is a binding already set to a different set of data. For instance you can’t drop a Customer ID into the same group as a Product if they originate from different entities. To get around this, all you need to do is create a new group and content area as shown above. Let’s take a more complex example that deals with more than just product. I want to design a complex screen that displays Products and their Category, as well as all the OrderDetails for which that product is selected. This time I will create a new screen and select List and Details, select the Products screen data, and include the related OrderDetails. However I’m going to totally change the layout so that a Product grid is at the top left and below that is the selected Product detail. Below that will be the Category text fields and image in two columns below. On the right side I want the OrderDetails grid to take up the whole right side of the screen. All this can be done in customization mode while you’re debugging the application. To do this, I first deleted all the content items in the tree and then re-created the content tree as shown in the image below. I also set the image to be larger and the description textbox to be 5 rows using the property window below the live preview. I added the green lines to indicate the containers and show how it maps to the content tree (click to enlarge): I hope this demystifies the screen designer a little bit. Remember that screen templates are excellent starting points – you can take them as-is or customize them further. It takes a little fooling around with customizing screens to get them to do exactly what you want but there are a ton of possibilities once you get the hang of it. Stay tuned for more information on how to create your own screen templates that show up in the “Add New Screen” dialog. Enjoy! The tutorial that might be interested: Adding Custom Control In LightSwitch

Read the article
Data Source Connection Pool Sizing

- by Steve Felts

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} One of the most time-consuming procedures of a database application is establishing a connection. The connection pooling of the data source can be used to minimize this overhead. That argues for using the data source instead of accessing the database driver directly. Configuring the size of the pool in the data source is somewhere between an art and science – this article will try to move it closer to science. From the beginning, WLS data source has had an initial capacity and a maximum capacity configuration values. When the system starts up and when it shrinks, initial capacity is used. The pool can grow to maximum capacity. Customers found that they might want to set the initial capacity to 0 (more on that later) but didn’t want the pool to shrink to 0. In WLS 10.3.6, we added minimum capacity to specify the lower limit to which a pool will shrink. If minimum capacity is not set, it defaults to the initial capacity for upward compatibility. We also did some work on the shrinking in release 10.3.4 to reduce thrashing; the algorithm that used to shrink to the maximum of the currently used connections or the initial capacity (basically the unused connections were all released) was changed to shrink by half of the unused connections. The simple approach to sizing the pool is to set the initial/minimum capacity to the maximum capacity. Doing this creates all connections at startup, avoiding creating connections on demand and the pool is stable. However, there are a number of reasons not to take this simple approach. When WLS is booted, the deployment of the data source includes synchronously creating the connections. The more connections that are configured in initial capacity, the longer the boot time for WLS (there have been several projects for parallel boot in WLS but none that are available). Related to creating a lot of connections at boot time is the problem of logon storms (the database gets too much work at one time). WLS has a solution for that by setting the login delay seconds on the pool but that also increases the boot time. There are a number of cases where it is desirable to set the initial capacity to 0. By doing that, the overhead of creating connections is deferred out of the boot and the database doesn’t need to be available. An application may not want WLS to automatically connect to the database until it is actually needed, such as for some code/warm failover configurations. There are a number of cases where minimum capacity should be less than maximum capacity. Connections are generally expensive to keep around. They cause state to be kept on both the client and the server, and the state on the backend may be heavy (for example, a process). Depending on the vendor, connection usage may cost money. If work load is not constant, then database connections can be freed up by shrinking the pool when connections are not in use. When using Active GridLink, connections can be created as needed according to runtime load balancing (RLB) percentages instead of by connection load balancing (CLB) during data source deployment. Shrinking is an effective technique for clearing the pool when connections are not in use. In addition to the obvious reason that there times where the workload is lighter, there are some configurations where the database and/or firewall conspire to make long-unused or too-old connections no longer viable. There are also some data source features where the connection has state and cannot be used again unless the state matches the request. Examples of this are identity based pooling where the connection has a particular owner and XA affinity where the connection is associated with a particular RAC node. At this point, WLS does not re-purpose (discard/replace) connections and shrinking is a way to get rid of the unused existing connection and get a new one with the correct state when needed. So far, the discussion has focused on the relationship of initial, minimum, and maximum capacity. Computing the maximum size requires some knowledge about the application and the current number of simultaneously active users, web sessions, batch programs, or whatever access patterns are common. The applications should be written to only reserve and close connections as needed but multiple statements, if needed, should be done in one reservation (don’t get/close more often than necessary). This means that the size of the pool is likely to be significantly smaller then the number of users. If possible, you can pick a size and see how it performs under simulated or real load. There is a high-water mark statistic (ActiveConnectionsHighCount) that tracks the maximum connections concurrently used. In general, you want the size to be big enough so that you never run out of connections but no bigger. It will need to deal with spikes in usage, which is where shrinking after the spike is important. Of course, the database capacity also has a big influence on the decision since it’s important not to overload the database machine. Planning also needs to happen if you are running in a Multi-Data Source or Active GridLink configuration and expect that the remaining nodes will take over the connections when one of the nodes in the cluster goes down. For XA affinity, additional headroom is also recommended. In summary, setting initial and maximum capacity to be the same may be simple but there are many other factors that may be important in making the decision about sizing.

Read the article
VNIC - New feature of AK8 - Working with VNICs

- by Steve Tunstall

One of the important new features of the AK8 code is the ability to use multiple IP addresses on the same physical network port. This feature is called VNICs, or Virtual NICs. This allows us to no longer "burn" a whole port in a cluster when one cluster peer owns a network port. Traditionally, we have had to leave Net0 empty on controller 2, because it was used for managing controller 1. Vise-versa for Net1 on Controller 1. Then, if you have data going over 10GigE ports, you probably only had half of your ports running at any given time, and the partner 10GigE port on the other controller just sat there, doing nothing, unless the first controller went down. What a waste. Those days are over. I want to thank and give a big shout-out to our good partner, OnX Enterprise Solutions, for allowing me to come into their lab and play around with their 7320 to do this demo. They let me make a big mess of their lab for the day as I played around with VNICs. If you're looking for a partner who knows Oracle well and can also piece together a solution from multiple vendors to get you what you need, OnX is a good choice. If you would like to talk to your local OnX rep, you can contact Scott Gill at [email protected] and he can point you in the right direction for your area. Here we go: Here is what your Datalinks window looks like BEFORE you upgrade to AK8. Here's what the same screen looks like after you upgrade. See the new box? So here is my current network setup. I have my 4 physical interfaces setup each with an IP address. If I ping them, no problems. So I can ping 180, 181, 251, and 252. However, if I try to ping 240, it does not work, as the 240 address is not being used by any of these interfaces, right?Let's change that. Here, I'm going to make a new Datalink by clicking the Datalink "Plus sign" button. I will check the VNIC box and tell it to use igb2, even though another interface is already using it. Now, I will create a new Interface, and choose "v_dl2" for it's datalink. My new network screen looks like this. A few things to take note of here. First, when I click the "igb2" device, it only highlights dl2 and int2. It does not highlight v_dl2 or v_int2.I think it should, but OK, it looks like VNICs don't highlight when you click the device. Second, note how the underscore character in v_dl2 and v_int2 do not seem to show on this screen. You can see it plainly if you go in and edit them, but from here it looks like a space instead of an underscore. Just a cosmetic bug, but something to be aware of. Now, if I click the VNIC datalink "v_dl2", on the other hand, it DOES highlight the device it belongs to, as it should. Seen here: Note that it did not, however, highlight int2 with it, even though int2 is connected to igb2. That's because we clicked v_dl2, which int2 has nothing to do with. So I'm OK with that. So let's try pinging 240 now. Of course, it works great. So I now make another VNIC, and call it v_dl3 using igb3, and v_int3 with an address of 241. I then setup three shares, using ports 251, 240, and 241.Remember that IP 251 and 240 both are using the same physical port of igb2, and IP 241 is using port igb3. Next, I copy a folder full of stuff over to all three shares at the same time. I have analytics going so I can see the traffic. My top chart is showing the logical interfaces, and the bottom chart is showing the physical ports.Sure enough, look at the igb2 and vnic1 interfaces. They equal the traffic going over the igb2 physical port on the second chart. VNIC2, on the other hand, gets igb3 all to itself. This would work the same way with 10Gig or Infiniband ports. You can now have multiple IP addresses and even completely different subnets sharing the same physical ports. You may need to make route table entries for that. This allows us to use all of the ports you paid for with no more waste. Very, very cool. One small "bug" I found when doing this. It's really not a bug, it was designed to do this when VNICs were not around. But now that we have NVIC capability, they should probably change this. I've alerted the engineering team about this and they're looking into it, so perhaps it will be fixed in a later code. Here it is. Remember when we made the new VNIC datalink, I specifically said to click on the "Plus Sign" button to create it? I don't always do that. I really like to use the drag-and-drop method to create my datalinks in the network screen.HOWEVER, if you were to do that for building a VNIC, it will mess you up a little. Watch this. Here, I'm dragging igb3 over to make a new datalink. igb3 is already being used by dl3, but I'm going to make this a VNIC, so who cares, right? Well, the ZFSSA does not KNOW you are going to make it a VNIC, now does it? So... it works as designed and REMOVES the igb3 device from the current dl3 datalink in the background. See how it's now missing? At the same time, the dl3 datalink choice is missing from my list of possible VNICs for me to choose from!!!! Hey!!! I wanted to pick dl3. Why isn't it on the list??? Well, it can't be on this list because dl3 no longer has a device associated with it. Bummer for you. When you click cancel, the device is still missing from dl3. The fix is easy. Just edit dl3 by clicking the pencil button, do absolutely nothing, and click "Apply". The device will magically come back. Now, make the VNIC datalink by clicking the "Plus Sign" button. Sure enough, once you check the VNIC box, dl3 is a valid choice. No problem. That's it for now. Have fun with VNICs.

Read the article
Chart Filtering

- by Tim Dexter

Interesting question from a colleague this week. Can you add a filter to a chart to just show a specific set of data? In an RTF template, you need to do a little finagling in the chart definition. In an online template, a couple of clicks and you're done. RTF Build your chart as you would normally to include all the data to start with. Now flip to the Advanced tab to see the code behind the chart. Its not very pretty but with a little effort you can get it looking a little more friendly. Here's my chart showing employees and their salaries. <Graph depthAngle="50" depthRadius="8" seriesEffect="SE_AUTO_GRADIENT"> <LegendArea visible="true"/> <Title text="Executive Department Only" visible="true" horizontalAlignment="CENTER"/> <LocalGridData colCount="{count(.//G_2)}" rowCount="1"> <RowLabels> <Label>SALARY</Label> </RowLabels> <ColLabels> <xsl:for-each select=".//G_2"> <Label><xsl:value-of select="EMP_NAME"/></Label> </xsl:for-each> </ColLabels> <DataValues> <RowData> <xsl:for-each select=".//G_2"> <Cell><xsl:value-of select="SALARY"/></Cell> </xsl:for-each> </RowData> </DataValues> </LocalGridData> </Graph> Note the emboldened text. Its currently grabbing all values in the G_2 level of the data. We can use an XPATH expression to filter the data to the set we want to see. In my case I want to only see the employees that are in the Executive department. My data is structured thus: <DATA_DS> <G_1> <DEPARTMENT_NAME>Accounting</DEPARTMENT_NAME> <G_2> <MANAGER>Higgins</MANAGER> <EMPLOYEE_ID>206</EMPLOYEE_ID> <HIRE_DATE>2002-06-07T00:00:00.000-04:00</HIRE_DATE> <SALARY>8300</SALARY> <JOB_TITLE>Public Accountant</JOB_TITLE> <PARAS>11000</PARAS> <EMP_NAME>William Gietz</EMP_NAME> </G_2> So the XPATH expression Im going to use to limit the data to the Executive department would be .//G_2[../DEPARTMENT_NAME='Executive'] Note the ../ moves the parser up the XML tree to be able to test the DEPARTMENT_NAME value. I added this XPATH expression to the three instances that need it ColCount, ColLabels and RowData. Its simple enough to do. Testing your XPATH expression is easier to do using a table of data. Please note, as soon as you make changes to the chart code. Going back to the Builder tab, you'll find that everything is grayed out. I recommend you make all the changes you can via the chart dialog before updating the code. Online Template Implementing the filter is much simpler, there is a dialog box to help you out. Add you chart and fill out the various data points you want to show. then hit the Filter item in the ribbon above the chart. That will pop the filter dialog box where you can then add a filter to the chart. You can add multiple filters if needed and of course you can use the Manage Filters button to re-open and edit the filters. Pretty straightforward stuff!

Read the article
WordPress not resizing images with Nginx + php-fpm and other issues

- by Julian Fernandes

Recently i setup a Ubuntu 12.04 VPS with 512mb/1ghz CPU, Nginx + php-fpm + Varnish + APC + Percona's MySQL server + CloudFlare Pro for our Ubuntu LoCo Team's WordPress blog. The blog get about 3~4k daily hits, use about 180MB and 8~20% CPU. Everything seems to be working insanely fast... page load is really good and is about 16x faster than any of our competitors... but there is one problem. When we upload a image, WordPress don't resize it, so all we can do it insert the full image in the post. If the imagem have, let's say, 30kb, it resize fine... but if the image have 100kb+, it won't... In nginx error logs i see this: upstream timed out (110: Connection timed out) while reading response header from upstream, client: 150.162.216.64, server: www.ubuntubrsc.com, request: "POST /wp-admin/async-upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "www.ubuntubrsc.com", referrer: "http://www.ubuntubrsc.com/wp-admin/media-upload.php?post_id=2668&" It seems to be related with the issue, but i dunno. When that timeout happens, i started to get it when i'm trying to view a post too: upstream timed out (110: Connection timed out) while reading response header from upstream, client: 150.162.216.64, server: www.ubuntubrsc.com, request: "GET /tutoriais-gimp-6-adicionando-aplicando-novos-pinceis.html HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "www.ubuntubrsc.com", referrer: "http://www.ubuntubrsc.com/" And only a restart of php5-fpm fix it. I tryed increasing some timeouts and stuffs but it did not worked, so i guess it's some kind of limitation i did not figured yet. Could someone help me with it, please? /etc/nginx/nginx.conf: user www-data; worker_processes 1; pid /var/run/nginx.pid; events { worker_connections 1024; use epoll; multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 15; keepalive_requests 2000; types_hash_max_size 2048; server_tokens off; server_name_in_redirect off; open_file_cache max=1000 inactive=300s; open_file_cache_valid 360s; open_file_cache_min_uses 2; open_file_cache_errors off; server_names_hash_bucket_size 64; # server_name_in_redirect off; client_body_buffer_size 128K; client_header_buffer_size 1k; client_max_body_size 2m; large_client_header_buffers 4 8k; client_body_timeout 10m; client_header_timeout 10m; send_timeout 10m; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## error_log /var/log/nginx/error.log; access_log off; ## # CloudFlare's IPs (uncomment when site goes live) ## set_real_ip_from 204.93.240.0/24; set_real_ip_from 204.93.177.0/24; set_real_ip_from 199.27.128.0/21; set_real_ip_from 173.245.48.0/20; set_real_ip_from 103.22.200.0/22; set_real_ip_from 141.101.64.0/18; set_real_ip_from 108.162.192.0/18; set_real_ip_from 190.93.240.0/20; real_ip_header CF-Connecting-IP; set_real_ip_from 127.0.0.1/32; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; gzip_vary on; gzip_proxied any; gzip_comp_level 9; gzip_min_length 1000; gzip_proxied expired no-cache no-store private auth; gzip_buffers 32 8k; # gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/fastcgi_params: fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 4k; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; /etc/nginx/sites-avaiable/default: ## # DEFAULT HANDLER # ubuntubrsc.com ## server { listen 8080; # Make site available from main domain server_name www.ubuntubrsc.com; # Root directory root /var/www; index index.php index.html index.htm; include /var/www/nginx.conf; access_log off; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location ~ /\. { deny all; access_log off; log_not_found off; } location ~* ^/wp-content/uploads/.*.php$ { deny all; access_log off; log_not_found off; } rewrite /wp-admin$ $scheme://$host$uri/ permanent; error_page 404 = @wordpress; log_not_found off; location @wordpress { include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_NAME /index.php; fastcgi_param SCRIPT_FILENAME $document_root/index.php; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; if (-f $request_filename) { fastcgi_pass unix:/var/run/php5-fpm.sock; } } } server { listen 8080; server_name ubuntubrsc.* www.ubuntubrsc.net www.ubuntubrsc.org www.ubuntubrsc.com.br www.ubuntubrsc.info www.ubuntubrsc.in; return 301 $scheme://www.ubuntubrsc.com$request_uri; } /var/www/nginx.conf: # BEGIN W3TC Minify cache location ~ /wp-content/w3tc/min.*\.js$ { types {} default_type application/x-javascript; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ /wp-content/w3tc/min.*\.css$ { types {} default_type text/css; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ /wp-content/w3tc/min.*js\.gzip$ { gzip off; types {} default_type application/x-javascript; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header Content-Encoding gzip; } location ~ /wp-content/w3tc/min.*css\.gzip$ { gzip off; types {} default_type text/css; expires modified 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; add_header Vary "Accept-Encoding"; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header Content-Encoding gzip; } # END W3TC Minify cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; try_files $uri $uri/ $uri.html /index.php?$args; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; add_header X-Powered-By "W3 Total Cache/0.9.2.5b"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc .gzip; } if (-f $request_filename$w3tc_enc) { rewrite (.*) $1$w3tc_enc break; } rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Skip 404 error handling by WordPress for static files if (-f $request_filename) { break; } if (-d $request_filename) { break; } if ($request_uri ~ "(robots\.txt|sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { break; } if ($request_uri ~* \.(css|js|htc|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml|asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$) { return 404; } # END W3TC Skip 404 error handling by WordPress for static files # BEGIN Better WP Security location ~ /\.ht { deny all; } location ~ wp-config.php { deny all; } location ~ readme.html { deny all; } location ~ readme.txt { deny all; } location ~ /install.php { deny all; } set $susquery 0; set $rule_2 0; set $rule_3 0; rewrite ^wp-includes/(.*).php /not_found last; rewrite ^/wp-admin/includes(.*)$ /not_found last; if ($request_method ~* "^(TRACE|DELETE|TRACK)"){ return 403; } set $rule_0 0; if ($request_method ~ "POST"){ set $rule_0 1; } if ($uri ~ "^(.*)wp-comments-post.php*"){ set $rule_0 2$rule_0; } if ($http_user_agent ~ "^$"){ set $rule_0 4$rule_0; } if ($rule_0 = "421"){ return 403; } if ($args ~* "\.\./") { set $susquery 1; } if ($args ~* "boot.ini") { set $susquery 1; } if ($args ~* "tag=") { set $susquery 1; } if ($args ~* "ftp:") { set $susquery 1; } if ($args ~* "http:") { set $susquery 1; } if ($args ~* "https:") { set $susquery 1; } if ($args ~* "(<|%3C).*script.*(>|%3E)") { set $susquery 1; } if ($args ~* "mosConfig_[a-zA-Z_]{1,21}(=|%3D)") { set $susquery 1; } if ($args ~* "base64_encode") { set $susquery 1; } if ($args ~* "(%24&x)") { set $susquery 1; } if ($args ~* "(\[|\]|$|$|<|>|ê|\"|;|\?|\*|=$)"){ set $susquery 1; } if ($args ~* "("|'|<|>|\|{|||%24&x)"){ set $susquery 1; } if ($args ~* "(%0|%A|%B|%C|%D|%E|%F|127.0)") { set $susquery 1; } if ($args ~* "(globals|encode|localhost|loopback)") { set $susquery 1; } if ($args ~* "(request|select|insert|concat|union|declare)") { set $susquery 1; } if ($http_cookie !~* "wordpress_logged_in_" ) { set $susquery "${susquery}2"; set $rule_2 1; set $rule_3 1; } if ($susquery = 12) { return 403; } # END Better WP Security /etc/php5/fpm/php-fpm.conf: pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log emergency_restart_threshold = 3 emergency_restart_interval = 1m process_control_timeout = 10s events.mechanism = epoll /etc/php5/fpm/php.ini (only options i changed): open_basedir ="/var/www/" disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,dl,system,shell_exec,fsockopen,parse_ini_file,passthru,popen,proc_open,proc_close,shell_exec,show_source,symlink,proc_close,proc_get_status,proc_nice,proc_open,proc_terminate,shell_exec ,highlight_file,escapeshellcmd,define_syslog_variables,posix_uname,posix_getpwuid,apache_child_terminate,posix_kill,posix_mkfifo,posix_setpgid,posix_setsid,posix_setuid,escapeshellarg,posix_uname,ftp_exec,ftp_connect,ftp_login,ftp_get,ftp_put,ftp_nb_fput,ftp_raw,ftp_rawlist,ini_alter,ini_restore,inject_code,syslog,openlog,define_syslog_variables,apache_setenv,mysql_pconnect,eval,phpAds_XmlRpc,phpA ds_remoteInfo,phpAds_xmlrpcEncode,phpAds_xmlrpcDecode,xmlrpc_entity_decode,fp,fput,virtual,show_source,pclose,readfile,wget expose_php = off max_execution_time = 30 max_input_time = 60 memory_limit = 128M display_errors = Off post_max_size = 2M allow_url_fopen = off default_socket_timeout = 60 APC settings: [APC] apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 64M apc.optimization = 0 apc.num_files_hint = 4096 apc.ttl = 60 apc.user_ttl = 7200 apc.gc_ttl = 0 apc.cache_by_default = 1 apc.filters = "" apc.mmap_file_mask = "/tmp/apc.XXXXXX" apc.slam_defense = 0 apc.file_update_protection = 2 apc.enable_cli = 0 apc.max_file_size = 10M apc.stat = 1 apc.write_lock = 1 apc.report_autofilter = 0 apc.include_once_override = 0 apc.localcache = 0 apc.localcache.size = 512 apc.coredump_unmap = 0 apc.stat_ctime = 0 /etc/php5/fpm/pool.d/www.conf user = www-data group = www-data listen = /var/run/php5-fpm.sock listen.owner = www-data listen.group = www-data listen.mode = 0666 pm = ondemand pm.max_children = 5 pm.process_idle_timeout = 3s; pm.max_requests = 50 I also started to get 404 errors in front page if i use W3 Total Cache's Page Cache (Disk Enhanced). It worked fine untill somedays ago, and then, out of nowhere, it started to happen. Tonight i will disable my mobile plugin and activate only W3 Total Cache to see if it's a conflict with them... And to finish all this, i have been getting this error: PHP Warning: apc_store(): Unable to allocate memory for pool. in /var/www/wp-content/plugins/w3-total-cache/lib/W3/Cache/Apc.php on line 41 I already modifed my APC settings, but no sucess. So... could anyone help me with those issuees, please? Ooohh... if it helps, i instaled PHP like this: sudo apt-get install php5-fpm php5-suhosin php-apc php5-gd php5-imagick php5-curl And Nginx from the official PPA. Sorry for my bad english and thanks for your time people! (:

Read the article
trying to use mod_proxy with httpd and tomcat

- by techsjs2012

I been trying to use mod_proxy with httpd and tomcat... I have on VirtualBox running Scientific Linux which has httpd and tomcat 6 on it.. I made two nodes of tomcat6. I followed this guide like 10 times and still cant get the 2nd node of tomcat working.. http://www.richardnichols.net/2010/08/5-minute-guide-clustering-apache-tomcat/ Here is the lines from my http.conf file <Proxy balancer://testcluster stickysession=JSESSIONID> BalancerMember ajp://127.0.0.1:8009 min=10 max=100 route=node1 loadfactor=1 BalancerMember ajp://127.0.0.1:8109 min=10 max=100 route=node2 loadfactor=1 </Proxy> ProxyPass /examples balancer://testcluster/examples <Location /balancer-manager> SetHandler balancer-manager AuthType Basic AuthName "Balancer Manager" AuthUserFile "/etc/httpd/conf/.htpasswd" Require valid-user </Location> Now here is my server.xml from node1 <?xml version='1.0' encoding='utf-8'?>   <Server port="8005" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node1">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> now here is the server.xml file from node2 <?xml version='1.0' encoding='utf-8'?>   <Server port="8105" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node2">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> I dont know what it is. but I been trying for days

Read the article
Coexistence of projects between Visual Studio 2010 and 2012

- by sreejukg

Microsoft has released another version of Visual Studio named Visual Studio 2012. As you can see there are user interface (UI) changes in all/most of the Microsoft applications as Microsoft is moving towards Windows 8 and changing the UI scheme for all of the applications. Visual Studio 2012 is a move to adapt the new interface requirements that are in coherent with Windows 8. Not only this Visual Studio 2012 has lots of improvements in several areas and it supports .Net framework 4.5. In the past, whenever a new version of Visual Studio launches, developers needed to upgrade the project to new version of Visual Studio which was a pain, especially when you are working with a team of developers. Once a solution is upgraded to a newer version, it was not possible to going back. With Visual studio 2012, you can avoid the pain of upgrading. Developers will be able to open their project in Visual Studio 2012 along with Visual Studio 2010 SP 1. This means if you create a project using Visual Studio 2012, you will be able to open it with Visual Studio 2010 SP 1 and vice versa. There are some exceptions (as always!). Visual Studio 2012 supports some new project types, which was not there in 2010 version. Such project, you will not be able to open in Visual Studio 2010. For e.g. Visual Studio 2012 brings a new project type named “Windows 8 Modern Applications”, such projects you will not be able to open using the 2010 version of Visual Studio. Just to prove the said subject, I am going to perform some simple operations. I installed Visual Studio 2010 with SP 1 and Visual Studio 2012 on my PC. See the snapshots for both the installations. Visual Studio 2010 Visual Studio 2012 Now I am going to perform two test cases. First create a project in 2010 Version and open it in 2012 version and vice versa. If you are interested, you can continue scrolling down, otherwise just say bye bye to this article. Case 1: Open a solution created using Visual Studio 2010 in 2012 version. I created a project in VS 2010 named TestProject2010 using empty ASP.Net web application template. Once created the project appears in VS 2010 as follows. I closed Visual Studio and opened the solution file using VS 2012 by using the Open Project dialog(File -> Open Project/Solution). Surprisingly, there is not even a warning message, just the project opened fine in Visual Studio 2012. Case 2: Open a solution created using Visual Studio 2012 in 2010 version. I have created a project in Visual Studio 2012 named testProject2012. See the screenshot of the project in VS 2012 below. Now try opening the solution in Visual Studio 2010. The solution loaded successfully, but Visual Studio failed to load project. See the screenshot. At first I was surprised. The Web application project template is available in both versions, So there should not be any problem. What is making the incompatibility? Is it ASP.Net version? Yes it is. VS 2012 assign ASP.Net 4.5 as the default version that was causing the trouble for Visual Studio 2010. I changed the version to .Net framework 4.0 and saved the project after that I was able to open the project in Visual Studio 2010. This as an excellent move from Visual Studio Team and allows enterprises to perform gradual upgrade to the new version. Now developers can work in any version based on availability and preference, simply I can use Visual Studio 2012 as my IDE while my colleague working on the same project can still use Visual Studio 2010.

Read the article
Add a Hovering Image Toolbar to Firefox

- by Asian Angel

When you work with webpage images in Firefox you normally have to use the Context Menu to do anything with them. The Image Toolbar extension provides an extra toolbar to use when you hover your mouse over webpage images. Note: This extension will not function if you have the NoScript extension installed/enabled unless JavaScript has permission to be active on that page. Before You can see the available “Context Menu” options for working with images here. Not bad but it would be nice if some other convenient options were available as well. Image Toolbar in Action Once you have installed the extension you will be able to view the toolbar whenever you hover your mouse over an image. All of the commands are active by default but you can choose what is available in the options. The toolbar will also appear in the upper left region of the image but can be set to appear relative to the cursor. Note: The default minimum image size for the toolbar to appear over is “260 x 260 pixels” so you will probably want to change it to a much smaller size (see options below). Here is what is available in the Image Toolbar: Save – Choose between being prompted when saving or automatically saving to a specified location Copy – Copies image and image URL so that you can paste the image or URL depending on the app pasted into Print – Provides print preview and printing capabilities Info – Opens a window with “properties information” about the image Folder – Opens browser’s download folder in Windows Explorer The “Save, Copy, Print, & Folder Commands” are all pretty clear in what you can expect from them but what about the “Info Command”? This is what you will see if you use the “Info Command” and expand the window out all the way. Very nice… Options There are quite a few options available for what appears to be such a small toolbar. The first “Tab Area” lets you set up the “Save Scheme” that best suits your personal needs. You can choose which commands are available in the toolbar, decide if you would like text labels visible, and enable small icons if desired. As mentioned above the default image size for the toolbar to appear is “260 x 260 pixels”…we set ours for “10 x 10 pixels”. If you would like the toolbar to appear relative to your mouse cursor as opposed to the upper left corner of the image then you can select for that here. Conclusion If you have been wanting more options for working with webpage images in Firefox then this will make a very useful and convenient addition to your browser. Links Download the Image Toolbar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Conserve Space in Firefox by Combining ToolbarsShow Alexa Ranking in FirefoxLightweight Extension to Show PageRank in FirefoxSwitch Windows by Hovering the Mouse Over a Window in Windows 7 or VistaQuick Tip: Show PageRank in Firefox while Google Toolbar is Hidden TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Roadkill’s Scan Port scans for open ports Out of 100 Tweeters Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy

Read the article
Introducing functional programming constructs in non-functional programming languages

- by Giorgio

This question has been going through my mind quite a lot lately and since I haven't found a convincing answer to it I would like to know if other users of this site have thought about it as well. In the recent years, even though OOP is still the most popular programming paradigm, functional programming is getting a lot of attention. I have only used OOP languages for my work (C++ and Java) but I am trying to learn some FP in my free time because I find it very interesting. So, I started learning Haskell three years ago and Scala last summer. I plan to learn some SML and Caml as well, and to brush up my (little) knowledge of Scheme. Well, a lot of plans (too ambitious?) but I hope I will find the time to learn at least the basics of FP during the next few years. What is important for me is how functional programming works and how / whether I can use it for some real projects. I have already developed small tools in Haskell. In spite of my strong interest for FP, I find it difficult to understand why functional programming constructs are being added to languages like C#, Java, C++, and so on. As a developer interested in FP, I find it more natural to use, say, Scala or Haskell, instead of waiting for the next FP feature to be added to my favourite non-FP language. In other words, why would I want to have only some FP in my originally non-FP language instead of looking for a language that has a better support for FP? For example, why should I be interested to have lambdas in Java if I can switch to Scala where I have much more FP concepts and access all the Java libraries anyway? Similarly: why do some FP in C# instead of using F# (to my knowledge, C# and F# can work together)? Java was designed to be OO. Fine. I can do OOP in Java (and I would like to keep using Java in that way). Scala was designed to support OOP + FP. Fine: I can use a mix of OOP and FP in Scala. Haskell was designed for FP: I can do FP in Haskell. If I need to tune the performance of a particular module, I can interface Haskell with some external routines in C. But why would I want to do OOP with just some basic FP in Java? So, my main point is: why are non-functional programming languages being extended with some functional concept? Shouldn't it be more comfortable (interesting, exciting, productive) to program in a language that has been designed from the very beginning to be functional or multi-paradigm? Don't different programming paradigms integrate better in a language that was designed for it than in a language in which one paradigm was only added later? The first explanation I could think of is that, since FP is a new concept (it isn't new at all, but it is new for many developers), it needs to be introduced gradually. However, I remember my switch from imperative to OOP: when I started to program in C++ (coming from Pascal and C) I really had to rethink the way in which I was coding, and to do it pretty fast. It was not gradual. So, this does not seem to be a good explanation to me. Or can it be that many non-FP programmers are not really interested in understanding and using functional programming, but they find it practically convenient to adopt certain FP-idioms in their non-FP language? IMPORTANT NOTE Just in case (because I have seen several language wars on this site): I mentioned the languages I know better, this question is in no way meant to start comparisons between different programming languages to decide which is better / worse. Also, I am not interested in a comparison of OOP versus FP (pros and cons). The point I am interested in is to understand why FP is being introduced one bit at a time into existing languages that were not designed for it even though there exist languages that were / are specifically designed to support FP.

Read the article
The dislikes of TDD

- by andrewstopford

I enjoy debates about TDD and Brian Harrys blog post is no exception. Brian sounds out what he likes and dislikes about TDD and it's the dislikes I'll focus on. The idea of having unit tests that cover virtually every line of code that I’ve written that I have to refactor every time I refactor my code makes me shudder. Doing this way makes me take nearly twice as long as it would otherwise take and I don’t feel like I get sufficient benefits from it. Refactoring your tests to match your refactored code sounds like the tests are suffering. Too many hard dependencies with no SOLID concerns are a sure fire reason you would do this. Maybe at the start of a TDD cycle you would need to do this as your design evolves and you remove these dependencies but this should quickly be resolved as you refactor. If you find your self still doing it then stop and look back at your design. Don’t get me wrong, I’m a big fan of unit tests. I just prefer to write them after the code has stopped shaking a bit. In fact most of my early testing is “manual”. Either I write a small UI on top of my service that allows me to plug in values and try it or write some quick API tests that I throw away as soon as I have validated them. The problem with this is that a UI can make assumptions on your code that then just unit test around and very quickly the design becomes bad and you technical debt sweeps in. If you want to blackbox test your code with a UI then do so after your TDD cycles not before. This is probably by biggest issue with a literal TDD interpretation. TDD says you never write a line of code without a failing test to show you need it. I find it leads developers down a dangerous path. Without any help from a methodology, I have met way too many developers in my life that “back into a solution”. By this, I mean they write something, it mostly works and they discover a new requirement so they tack it on, and another and another and when they are done, they’ve got a monstrosity of special cases each designed to handle one specific scenario. There’s way more code than there should be and it’s way too complicated to understand. I believe in finding general solutions to problems from which all the special cases naturally derive rather than building a solution of special cases. In my mind, to do this, you have to start by conceptualizing and coding the framework of the general algorithm. For me, that’s a relatively monolithic exercise. TDD is an development pratice not a methodology, the danger is that the solution becomes a mass of different things that violate DRY. TDD won't solve these problems, only good communication and practices like pairing will help. Above all else an assumption that TDD replaces a methodology is a mistake, combine it with what ever works for your team\business but only good communication will help. A good naming scheme\structure for folders, files and tests can help you and your team isolate what tests are for what.

Read the article
Functional programming constructs in non-functional programming languages

- by Giorgio

This question has been going through my mind quite a lot lately and since I haven't found a convincing answer to it I would like to know if other users of this site have thought about it as well. In the recent years, even though OOP is still the most popular programming paradigm, functional programming is getting a lot of attention. I have only used OOP languages for my work (C++ and Java) but I am trying to learn some FP in my free time because I find it very interesting. So, I started learning Haskell three years ago and Scala last summer. I plan to learn some SML and Caml as well, and to brush up my (little) knowledge of Scheme. Well, a lot of plans (too ambitious?) but I hope I will find the time to learn at least the basics of FP during the next few years. What is important for me is how functional programming works and how / whether I can use it for some real projects. I have already developed small tools in Haskell. In spite of my strong interest for FP, I find it difficult to understand why functional programming constructs are being added to languages like C#, Java, C++, and so on. As a developer interested in FP, I find it more natural to use, say, Scala or Haskell, instead of waiting for the next FP feature to be added to my favourite non-FP language. In other words, why would I want to have only some FP in my originally non-FP language instead of looking for a language that has a better support for FP? For example, why should I be interested to have lambdas in Java if I can switch to Scala where I have much more FP concepts and access all the Java libraries anyway? Similarly: why do some FP in C# instead of using F# (to my knowledge, C# and F# can work together)? Java was designed to be OO. Fine. I can do OOP in Java (and I would like to keep using Java in that way). Scala was designed to support OOP + FP. Fine: I can use a mix of OOP and FP in Scala. Haskell was designed for FP: I can do FP in Haskell. If I need to tune the performance of a particular module, I can interface Haskell with some external routines in C. But why would I want to do OOP with just some basic FP in Java? So, my main point is: why are non-functional programming languages being extended with some functional concept? Shouldn't it be more comfortable (interesting, exciting, productive) to program in a language that has been designed from the very beginning to be functional or multi-paradigm? Don't different programming paradigms integrate better in a language that was designed for it than in a language in which one paradigm was only added later? The first explanation I could think of is that, since FP is a new concept (it isn't new at all, but it is new for many developers), it needs to be introduced gradually. However, I remember my switch from imperative to OOP: when I started to program in C++ (coming from Pascal and C) I really had to rethink the way in which I was coding, and to do it pretty fast. It was not gradual. So, this does not seem to be a good explanation to me. Also, I asked myself if my impression is just plainly wrong due to lack of knowledge. E.g., do C# and C++11 support FP as extensively as, say, Scala or Caml do? In this case, my question would be simply non-existent. Or can it be that many non-FP programmers are not really interested in using functional programming, but they find it practically convenient to adopt certain FP-idioms in their non-FP language? IMPORTANT NOTE Just in case (because I have seen several language wars on this site): I mentioned the languages I know better, this question is in no way meant to start comparisons between different programming languages to decide which is better / worse. Also, I am not interested in a comparison of OOP versus FP (pros and cons). The point I am interested in is to understand why FP is being introduced one bit at a time into existing languages that were not designed for it even though there exist languages that were / are specifically designed to support FP.

Read the article
How to Crop Pictures in Word, Excel, and PowerPoint 2010

- by DigitalGeekery

When you add pictures to your Office documents you might need to crop them to remove unwanted areas, or isolate a specific part. Today we’ll take a look at how to crop images in Office 2010. Note: We will show you examples in Word, but you can crop images in Word, Excel, and PowerPoint. To insert a picture into your Office document, click the Picture button on the Insert tab. The Picture Tools format ribbon should now be active. If not, click on the image. New in Office 2010 is the ability to see the area of the photo that you are keeping in addition to what will be cropped out. On the Format tab, click Crop. Click and drag inward any of the four corners to crop from any one side. Notice you can still see the area to be cropped out is show in translucent gray. Press and hold the CTRL key while you drag a corner cropping handle inward to crop equally on all four sides. To crop equally on right and left or the top and bottom, press and hold down the CTRL key while you drag the center cropping handle on either side inward. You can further adjust the cropping area by clicking and dragging the picture behind the cropping area. To accept the current dimensions and crop the photo, press escape or click anywhere outside the cropping area. You can manually crop the image to exact dimensions. This can be done by right clicking on the image and entering the dimensions in the Width and Height boxes, or in the Size group on the Format tab. Crop to a Shape Select your photo and click Crop from the Size group on the Format tab. Select Crop to Shape and choose any of the available shapes. You photo will be cropped into that shape. Using Fit and Fill If you wish to crop a photo but fill the shape, select Fill. When you choose this option, some edges of the picture might not display but the original picture aspect ratio is maintained. If you wish to have all of the picture fit within a shape, choose Fit. The original picture aspect ratio will be maintained. Conclusion Users moving from previous versions of Microsoft Office are sure to appreciate the improved cropping abilities in Office 2010, especially the ability to see what will and won’t be kept when you crop a photo. Similar Articles Productive Geek Tips Import Microsoft Access Data Into ExcelEmbed an Excel Worksheet Into PowerPoint or Word 2007Add Artistic Effects to Your Pictures in Office 2010Embed True Type Fonts in Word and PowerPoint 2007 DocumentsChange The Default Color Scheme In Office 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

Read the article
Make Your Mouse Pointers Left-hand Friendly

- by Matthew Guay

It’s a right-centric world, with everything from pencils to computer mice expecting you to be right-handed. Here’s how you can train your mouse and cursors in Windows 7 and Vista to respect your left-handedness. Using your Left Hand the Right Way It’s easy to switch your mouse to left-handed mode. Enter “mouse” in your Start menu search, and select the first entry. Check the “Switch primary and secondary buttons” box to make your mouse more left-hand friendly. Now your primary select button is your right button, and the secondary button (commonly referred to as right-click) is the left button. But, it can still be awkward to select items on screen with your left hand using the default cursors. MSDN has a free set of cursors designed for left-handed users, that can fix this problem for you. These cursors are exactly like the default Aero cursors in Windows 7 and Vista, except they are reversed to make them better for left-handed use. The cursors are available in 3 sizes: normal, large, and extra large. The normal ones are the same size as the default ones in Windows 7; feel free to choose the other sizes if you prefer them. Click each link to download all 6 cursors for your size (link below). Click “I Agree” after selecting the cursors to accept the license agreement and download them. Once you have all 6 cursors downloaded, select the Pointers tab in the Mouse Properties dialog. Click the cursor to change, and then click Browse to select the new cursor. Browse to the folder you downloaded your new cursors to, select the correct cursor, and click Open. Do this for each of the 6 cursors to be changed. Strangely, the Busy cursor (the spinning blue orb) is a static cursor, so you may not wish to change it. All the other ones look and act like their standard counterparts. Here’s the cursors to be changed, and their equivalents in the default cursors: Normal Select: aero_arrow_left.cur Help Select: aero_helpsel_left.cur Working in Background: aero_working_left.ani Busy: aero_busy_left.cur Handwriting: aero_pen_left.cur Link Select: aero_link_left.cur After changing all the cursors, click Save As… to save this mouse scheme so you can easily select it in the future. Finally click Ok to close the Mouse Properties dialog and accept the changes. Now your pointers will be easier to use left-handed! Conclusion Whether you’re right-handed or left-handed, you can enjoy the Aero cursors in Windows 7 or Vista in the way that works best for you. Unfortunately, many mice are still designed for right-handed people, but this trick will help you make the best out of your mouse. We included all of the 6 cursors for you in a zip file you can download Here. This will make it easier for you to get them all together without having to download them individually. Link Download Left-Handed Mouse Pointers from MSDN Similar Articles Productive Geek Tips Prevent Themes From Modifying Icons and Cursors in Windows 7How To Personalize Windows 7 StarterShow Two Time Zones in Your Outlook 2007 CalendarMake Mouse Navigation Faster in WindowsWhy Doesn’t Tab Work for Drop-down Controls in Firefox on OS X? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff

Read the article
Iron Speed Designer 7.0 - the great gets greater!

- by GGBlogger

For Immediate Release Iron Speed, Inc. Kelly Fisher +1 (408) 228-3436 [email protected] http://www.ironspeed.com Iron Speed Version 7.0 Generates SharePoint Applications New! Support for Microsoft SharePoint speeds application generation and deployment San Jose, CA – June 8, 2010. Software development tools-maker Iron Speed, Inc. released Iron Speed Designer Version 7.0, the latest version of its popular Web 2.0 application generator. Iron Speed Designer generates rich, interactive database and reporting applications for .NET, Microsoft SharePoint and the Cloud. In addition to .NET applications, Iron Speed Designer V7.0 generates database-driven SharePoint applications. The ability to quickly create database-driven applications for SharePoint eliminates a lot of work, helping IT departments generate productivity-enhancing applications in just a few hours. Generated applications include integrated SharePoint application security and use SharePoint master pages. “It’s virtually impossible to build database-driven application in SharePoint by hand. Iron Speed Designer V7.0 not only makes this possible, the tool makes it easy.” – Razi Mohiuddin, President, Iron Speed, Inc. Integrated SharePoint application security Generated applications include integrated SharePoint application security. SharePoint sites and their groups are used to retrieve security roles. Iron Speed Designer validates the user against a Microsoft SharePoint server on your network by retrieving the logged in user’s credentials from the SharePoint Context. “The Iron Speed Designer generated application integrates seamlessly with SharePoint security, removing the hassle of designing, testing and approving your own security layer.” -Michael Landi, Solutions Architect, Light Speed Solutions SharePoint Solution Packages Iron Speed Designer V7.0 creates SharePoint Solution Packages (WSPs) for easy application deployment. Using the Deployment Wizard, a single application WSP is created and can be deployed to your SharePoint server. “Iron Speed Designer is the first product on the market that allows easy and painless deployment of database-driven .NET web applications inside the SharePoint environment.” -Bryan Patrick, Developer, Pseudo Consulting SharePoint master pages and themes In V7.0, generated applications use SharePoint master pages and contain the same content as other SharePoint pages. Generated applications use the current SharePoint color scheme and display standard SharePoint navigation controls on each page. “Iron Speed Designer preserves the look and feel of the SharePoint environment in deployed database applications without additional hand-coding.” -Kirill Dmitriev, Software Developer, Iron Speed, Inc. Iron Speed Designer Version 7.0 System Requirements Iron Speed Designer Version 7.0 runs on Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003 and 2008. It generates .NET Web applications for Microsoft SQL Server, Oracle, Microsoft Access and MySQL. These applications may be deployed on any machine running the .NET Framework. Iron Speed Designer supports Microsoft SharePoint 2007 and Windows SharePoint Services (WSS3). Find complete information about Iron Speed Designer Version 7.0 at www.ironspeed.com. About Iron Speed, Inc. Iron Speed is the leader in enterprise-class application generation. Our software development tools generate database and reporting applications in significantly less time and cost than hand-coding. Our flagship product, Iron Speed Designer, is the fastest way to deliver applications for the Microsoft .NET and software-as-a-service cloud computing environments. With products built on decades of experience in enterprise application development and large-scale e-commerce systems, Iron Speed products eliminate the need for developers to choose between "full featured" and "on schedule." Founded in 1999, Iron Speed is well funded with a capital base of over $20M and strategic investors that include Arrow Electronics and Avnet, as well as executives from AMD, Excelan, Onsale, and Oracle. The company is based in San Jose, Calif., and is located online at www.ironspeed.com.

Read the article
SPARC T4-2 Produces World Record Oracle Essbase Aggregate Storage Benchmark Result

- by Brian

Significance of Results Oracle's SPARC T4-2 server configured with a Sun Storage F5100 Flash Array and running Oracle Solaris 10 with Oracle Database 11g has achieved exceptional performance for the Oracle Essbase Aggregate Storage Option benchmark. The benchmark has upwards of 1 billion records, 15 dimensions and millions of members. Oracle Essbase is a multi-dimensional online analytical processing (OLAP) server and is well-suited to work well with SPARC T4 servers. The SPARC T4-2 server (2 cpus) running Oracle Essbase 11.1.2.2.100 outperformed the previous published results on Oracle's SPARC Enterprise M5000 server (4 cpus) with Oracle Essbase 11.1.1.3 on Oracle Solaris 10 by 80%, 32% and 2x performance improvement on Data Loading, Default Aggregation and Usage Based Aggregation, respectively. The SPARC T4-2 server with Sun Storage F5100 Flash Array and Oracle Essbase running on Oracle Solaris 10 achieves sub-second query response times for 20,000 users in a 15 dimension database. The SPARC T4-2 server configured with Oracle Essbase was able to aggregate and store values in the database for a 15 dimension cube in 398 minutes with 16 threads and in 484 minutes with 8 threads. The Sun Storage F5100 Flash Array provides more than a 20% improvement out-of-the-box compared to a mid-size fiber channel disk array for default aggregation and user-based aggregation. The Sun Storage F5100 Flash Array with Oracle Essbase provides the best combination for large Oracle Essbase databases leveraging Oracle Solaris ZFS and taking advantage of high bandwidth for faster load and aggregation. Oracle Fusion Middleware provides a family of complete, integrated, hot pluggable and best-of-breed products known for enabling enterprise customers to create and run agile and intelligent business applications. Oracle Essbase's performance demonstrates why so many customers rely on Oracle Fusion Middleware as their foundation for innovation. Performance Landscape System Data Size(millions of items) Database Load(minutes) Default Aggregation(minutes) Usage Based Aggregation(minutes) SPARC T4-2, 2 x SPARC T4 2.85 GHz 1000 149 398* 55 Sun M5000, 4 x SPARC64 VII 2.53 GHz 1000 269 526 115 Sun M5000, 4 x SPARC64 VII 2.4 GHz 400 120 448 18 * – 398 mins with CALCPARALLEL set to 16; 484 mins with CALCPARALLEL threads set to 8 Configuration Summary Hardware Configuration: 1 x SPARC T4-2 2 x 2.85 GHz SPARC T4 processors 128 GB memory 2 x 300 GB 10000 RPM SAS internal disks Storage Configuration: 1 x Sun Storage F5100 Flash Array 40 x 24 GB flash modules SAS HBA with 2 SAS channels Data Storage Scheme Striped - RAID 0 Oracle Solaris ZFS Software Configuration: Oracle Solaris 10 8/11 Installer V 11.1.2.2.100 Oracle Essbase Client v 11.1.2.2.100 Oracle Essbase v 11.1.2.2.100 Oracle Essbase Administration services 64-bit Oracle Database 11g Release 2 (11.2.0.3) HP's Mercury Interactive QuickTest Professional 9.5.0 Benchmark Description The objective of the Oracle Essbase Aggregate Storage Option benchmark is to showcase the ability of Oracle Essbase to scale in terms of user population and data volume for large enterprise deployments. Typical administrative and end-user operations for OLAP applications were simulated to produce benchmark results. The benchmark test results include: Database Load: Time elapsed to build a database including outline and data load. Default Aggregation: Time elapsed to build aggregation. User Based Aggregation: Time elapsed of the aggregate views proposed as a result of tracked retrieval queries. Summary of the data used for this benchmark: 40 flat files, each of size 1.2 GB, 49.4 GB in total 10 million rows per file, 1 billion rows total 28 columns of data per row Database outline has 15 dimensions (five of them are attribute dimensions) Customer dimension has 13.3 million members 3 rule files Key Points and Best Practices The Sun Storage F5100 Flash Array has been used to accelerate the application performance. Setting data load threads (DLTHREADSPREPARE) to 64 and Load Buffer to 6 improved dataloading by about 9%. Factors influencing aggregation materialization performance are "Aggregate Storage Cache" and "Number of Threads" (CALCPARALLEL) for parallel view materialization. The optimal values for this workload on the SPARC T4-2 server were: Aggregate Storage Cache: 32 GB CALCPARALLEL: 16 See Also Oracle Essbase Aggregate Storage Option Benchmark on Oracle's SPARC T4-2 Server oracle.com Oracle Essbase oracle.com OTN SPARC T4-2 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 28 August 2012.

Read the article
Release 17 is here!

- by Cheryl

Our training development team has been busy updating courses to keep pace with the new release of CRM On Demand. Release 17 is here! And I heard recently that it's one of our biggest releases ever. A lot of new features and functionality for you to take advantage of - too much for me to cover in this blog post. But, I thought I'd tell you about a few of my favorites - be sure to take a look at the What's New in Release 17 recording to see the full list, though...because I'm only going to touch on a few. Create your own look - okay, I'm starting with the fun stuff. But, there is a new customizable themes feature so that you can change the look of the application; colors, logo, the shape of the tabs. And it's really easy. There's also a whole new library of ready-made themes for you to pick from if you just want to go with one of those. Use this new feature to match the look of your company logo and color scheme. Or blaze new trails. You can create the look for the whole company, or a different look for each CRM On Demand role. This might especially come in handy if you're using the Partner Relationship Management (PRM) capabilities of CRM On Demand - you can create themes for your partner-facing roles to provide branded partner portals. Speaking of PRM - there are enhancements in this release to help companies better manage their partner relationships. A new Deal Registration object, which is separate from the Opportunity record, and better Special Pricing Request and Marketing Development Fund Request processes, give a lot more flexibility in how companies can build and manage their relationships with partners. Some new options for Forecasts in in Release 17, too. You can now have more than one type of forecast generated each forecast period. For example, you might need to see a forecast of the total opportunity revenue for your sales team, as well as on that breaks down revenue by product. The forecast definition now lets you do that. Other options allow you to make submitting forecasts easier, split opportunity revenue across the team and forecast that split appropriately. And - look for the new Forecast subject area in Answers, for building custom forecast reports. Ever wish you could use Workflow Rules to automatically reassign leads if they haven't been followed up on...or to email a manager if the status of a service request isn't changed after a specified period of time? Then check out the new Wait action for workflows. I think you'll be happy. Ok, enough for today. There is a lot to Release 17 that I didn't mention - a lot has been added for our Life Science industry edition, some new data visibility options, a new Data Loader tool, and more. Stay tuned for more blog posts about these and other Release 17 features in the coming weeks. In the meantime, don't forget about all of the resources we have for you to learn more (see my Learning About Release 17 blog post for details).

Read the article
Webcast Q&A: Demystifying External Authorization

- by B Shashikumar

Thanks to everyone who joined us on our webcast with SANS Institute on "Demystifying External Authorization". Also a special thanks to Tanya Baccam from SANS for sharing her experiences reviewing Oracle Entitlements Server. If you missed the webcast, you can catch a replay of the webcast here. Here is a compilation of the slides that were used on today's webcast. SANS Institute Product Review: Oracle Entitlements Server We have captured the Q&A from the webcast for those who couldn't attend. Q: Is Oracle ADF integrated with Oracle Entitlements Server (OES) ? A: In Oracle Fusion Middleware 11g and later, Oracle ADF, Oracle WebCenter, Oracle SOA Suite and other middleware products are all built on Oracle Platform Security Services (OPSS). OPSS privodes many security functions like authentication, audit, credential stores, token validaiton, etc. OES is the authorization solution underlying OPSS. And OES 11g unifies different authorization mechanisms including Java2/ABAC/RBAC. Q: Which portal frameworks support the use of OES policies for portal entitlement decisions? A: Many portals including Oracle WebCenter 11g run natively on top of OES. The authorization engine in WebCenter is OES. Besides, OES offers out of the box integration with Microsoft SharePoint. So SharePoint sites, sub sites, web parts, navigation items, document access control can all be secured with OES. Several other portals have also been secured with OES ex: IBM websphere portal Q: How do we enforce Seperation of Duties (SoD) rules using OES (also how does that integrate with a product like OIA) ? A: A product like OIM or OIA can be used to set up and govern SoD policies. OES enforces these policies at run time. Role mapping policies in OES can assign roles dynamically to users under certain conditions. So this makes it simple to enforce SoD policies inside an application at runtime. Q: Our web application has objects like buttons, text fields, drop down lists etc. is there any ”autodiscovery” capability that allows me to use/see those web page objects so you can start building policies over those objects? or how does it work? A: There ae few different options with OES. When you build an app, and make authorization calls with the app in the test environment, you can put OES in discovery mode and have OES register those authorization calls and decisions. Instead of doing this after the fact, an application like Oracle iFlex has built-in UI controls where when the app is running, a script can intercept authorization calls and migrate those over to OES. And in Oracle ADF, a lot of resources are protected so pages, task flows and other resources be registered without OES knowing about them. Q: Does current Oracle Fusion application use OES ? The documentation does not seem to indicate it. A: The current version of Fusion Apps is using a preview version of OES. Soon it will be repalced with OES 11g. Q: Can OES secure mobile apps? A: Absolutely. Nowadays users are bringing their own devices such as a a smartphone or tablet to work. With the Oracle IDM platform, we can tie identity context into the access management stack. With OES we can make use of context to enforce authorization for users accessing apps from mobile devices. For example: we can take into account different elements like authentication scheme, location, device type etc and tie all that information into an authorization decision. Q: Does Oracle Entitlements Server (OES) have an ESAPI implementation? A: OES is an authorization solution. ESAPI/OWASP is something we include in our platform security solution for all oracle products, not specifically in OES Q: ESAPI has an authorization API. Can I use that API to access OES? A: If the API supports an interface / sspi model that can be configured to invoke an external authz system through some mechanism then yes

Read the article
Tyrus 1.8

- by Pavel Bucek

Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

Read the article
Moving monarchs and dragons: migrating the JDK bugs to JIRA

- by darcy

Among insects, monarch butterflies and dragonflies have the longest migrations; migrating JDK bugs involves a long journey as well! As previously announced by Mark back in March, we've been working according to a revised plan to transition the JDK bug management from Sun's legacy system to initially an Oracle-internal JIRA instance which is afterward made visible and usable externally. I've been busily working on this project for the last few months and the team has made good progress on many aspects of the effort: JDK bugs will be imported into JIRA regardless of age; bugs will also be imported regardless of state, including closed bugs. Consequently, the JDK bug project will start pre-populated with over 100,000 existing bugs, some dating all the way back to 1994. This will allow a continuity of information and allow new issues to be linked to old ones. Using a custom import process, the Sun bug numbers will be preserved in JIRA. For example, the Sun bug with bug number 4040458 will become "JDK-4040458" in JIRA. In JIRA the project name, "JDK" in our case, is part of the bug's identifier. Bugs created after the JIRA migration will be numbered starting at 8000000; bugs imported from the legacy system have numbers ranging between 1000000 and 79999999. We're working with the bugs.sun.com team to try to maintain continuity of the ability to both read JDK bug information as well as to file new incidents. At least for now, the overall architecture of bugs.sun.com will be the same as it is today: it will be a gateway bridging to an Oracle-internal system, but the internal system will change to JIRA from the legacy database. Generally we are aiming to preserve the visibility of bugs currently viewable on bugs.sun.com; however, bugs in areas not related to the JDK will not be visible after the transition to JIRA. New incoming incidents will be sent to a separate JIRA project for initial triage before possibly being moved into the JDK project. JDK bug management leans heavily on being able to track the state of bugs in multiple releases, especially to coordinate delivering synchronized security releases (known as CPUs, critital patch updates, in Oracle parlance). For a security release, it is common for half a dozen or more release trains to be affected (for example, JDK 5, JDK 6 update, OpenJDK 6, JDK 7 update, JDK 8, virtual releases for HotSpot express, etc.). We've determined we need to track at least the tuple of (release, responsible engineer/assignee for the release, status in the release) for the release trains a fix is going into. To do this in JIRA, we are creating a separate port/backport issue type along with a custom link type to allow the multiple release information to be easily grouped and presented together. The Sun legacy system had a three-level classification scheme, product, category, and subcategory. Out of the box, JIRA only has a one-level classification, component. We've implemented a custom second-level classification, subcomponent. As part of the bug migration we've taken the opportunity to think about how bugs should be grouped under a two-level system and we'll the new system will be simpler and more regular. The main top-level components of the JDK product will include: core-libs client-libs deploy install security-libs other-libs tools hotspot For the libs areas, the primary name of the subcomportment will be the package of the API in question. In the core-libs component, there will be subcomponents like: java.lang java.lang.class_loading java.math java.util java.util:i18n In the tools component, subcomponents will primarily correspond to command names in $JDK/bin like, jar, javac, and javap. The first several bulk imports of the JDK bugs into JIRA have gone well and we're continuing to refine the import to have greater fidelity to the current data, including by reconstructing information not brought over in a structured fashion during the previous large JDK bug system migration back in 2004. We don't currently have a firm timeline of when the new system will be usable externally, but as it becomes available, I'll share further information in follow-up blog posts.

Read the article
Fun with Python

- by dotneteer

I am taking a class on Coursera recently. My formal education is in physics. Although I have been working as a developer for over 18 years and have learnt a lot of programming on the job, I still would like to gain some systematic knowledge in computer science. Coursera courses taught by Standard professors provided me a wonderful chance. The three languages recommended for assignments are Java, C and Python. I am fluent in Java and have done some projects using C++/MFC/ATL in the past, but I would like to try something different this time. I first started with pure C. Soon I discover that I have to write a lot of code outside the question that I try to solve because the very limited C standard library. For example, to read a list of values from a file, I have to read characters by characters until I hit a delimiter. If I need a list that can grow, I have to create a data structure myself, something that I have taking for granted in .Net or Java. Out of frustration, I switched to Python. I was pleasantly surprised to find that Python is very easy to learn. The tutorial on the official Python site has the exactly the right pace for me, someone with experience in another programming. After a couple of hours on the tutorial and a few more minutes of toying with IDEL, I was in business. I like the “battery supplied” philosophy that gives everything that I need out of box. For someone from C# or Java background, curly braces are replaced by colon(:) and tab spaces. Although I tend to miss colon from time to time, I found that the idea of tab space is actually very nice once I get use to them. I also like to feature of multiple assignment and multiple return parameters. When I need to return a by-product, I just add it to the list of returns. When would use Python? I would use Python if I need to computer anything quick. The language is very easy to use. Python has a good collection of libraries (packages). The REPL of the interpreter allows me test ideas quickly before committing them into script. Lots of computer science work have been ported from Lisp to Python. Some universities are even teaching SICP in Python. When wouldn’t I use Python? I mostly would not use it in a managed environment, such as Ironpython or Jython. Both .Net and Java already have a rich library so one has to make a choice which library to use. If we use the managed runtime library, the code will tie to the particular runtime and thus not portable. If we use the Python library, then we will face the relatively long start-up time. For this reason, I would not recommend to use Ironpython for WP7 development. The only situation that I see merit with managed Python is in a server application where I can preload Python so that the start-up time is not a concern. Using Python as a managed glue language is an over-kill most of the time. A managed Scheme could be a better glue language as it is small enough to start-up very fast.

Read the article

Search Results

Search found 20573 results on 823 pages for 'pretty big scheme'.

Page 308/823 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315 | Next Page >

- by dapostolov

- by MarkPearl

- by Kellsey Ruppel

- by TStewartDev

- by Jason Crease

- by ChrisD

- by Steve Felts

- by Steve Tunstall

- by Tim Dexter

- by Julian Fernandes

- by techsjs2012

- by sreejukg

- by Asian Angel

- by Giorgio

- by andrewstopford

- by Giorgio

- by DigitalGeekery

- by Matthew Guay

- by GGBlogger

- by Brian

- by Cheryl

- by B Shashikumar

- by Pavel Bucek

- by darcy

- by dotneteer

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315 | Next Page >