Search Results

Search found 33716 results on 1349 pages for 'smtp access'.

Page 308/1349 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• nagios: trouble using check_smtps command

  - by ethrbunny

  I'm trying to use this command to check on port 587 for my postfix server. Using nmap -P0 mail.server.com I see this: Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-04 05:01 PST Nmap scan report for mail.server.com (xx.xx.xx.xx) Host is up (0.0016s latency). rDNS record for xx.xx.xx.xx: another.server.com Not shown: 990 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 110/tcp open pop3 111/tcp open rpcbind 143/tcp open imap 465/tcp open smtps 587/tcp open submission 993/tcp open imaps 995/tcp open pop3s 5666/tcp open nrpe So I know the relevant ports for smtps (465 or 587) are open. When I use openssl s_client -connect mail.server.com:587 -starttls smtp I get a connection with all the various SSL info. (Same for port 465). But when I try libexec/check_ssmtp -H mail.server.com -p587 I get: CRITICAL - Cannot make SSL connection. 140200102082408:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:699: What am I doing wrong?

  Read the article

• Unable to telnet out on port 25 on windows server 2008

  - by NickGPS

  Hi All, I just setup a Windows 2008 R2 server and am trying to get a basic mail server up and running so that I can send emails from my applications. I setup a virtual SMTP server in IIS6 and tried doing a local telnet to port 25, which seemed to work fine. There were no errors during this stage and I can see the mail message appear in the Queue folder. The problem is that mail never leaves the Queue folder. I then tried to telnet to a remote mail server on port 25 but couldn't connect:- telnet 209.85.227.27 25 Could not open connection to the host, on port 25: Connection failed) I checked my firewall and there is a default setting to allow all outgoing TCP traffic with no restriction. I even setup a specific rule for outgoing port 25 traffic but to no avail. I then ran a SmtpDiag.exe command .\SmtpDiag.exe [email protected] [email protected] and received the following output Searching for Exchange external DNS settings. Computer name is WIN-SERVERNAME. Failed to connect to the domain controller. Error: 8007054b Checking SOA for gmail.com. Checking external DNS servers. Checking internal DNS servers. SOA serial number match: Passed. Checking local domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Local DNS test passed. Checking remote domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Remote DNS test passed. Checking MX servers listed for [email protected]. Connecting to gmail-smtp-in.l.google.com [209.85.227.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Is there any other diagnostics I can do to figure out if it's my firewall or something else? I have removed antivirus to make sure that it wasn't causing the problem. Any ideas would be much appreciated.

  Read the article

• Make Exchange 2007 use the correct SSL certificate

  - by Neil

  I have an SBS 2008 server contososerver.contosodomain.local which is externally accessible with the domain remote.contoso.com and an SSL certificate for the external domain which we installed using the SBS 2008 wizard. This works great for OWA because IIS serves the remote.contoso.com certificate. I also want to turn on external POP3/IMAP4/SMTP however when I try, I get served the internal certificate that SBS generated automatically (using its internal CA) which has the alternate names remote.contoso.com, contososerver.contosodomain.local and contososerver. I tried removing this certificate from Exchange but it won't let me because it needs it for its internal receive connector. So how do I tell Exchange 2007 to use the real certificate for external POP3/IMAP4/SMTP?

  Read the article

• Configure sendmail to accept connection from one other IP address

  - by Kumala

  I have a RubyOnRails application running on the same server that runs sendmail. The application sends out (no need to receive) emails via the local sendmail. Now I intend to move sendmail to a dedicated server. How do I make sendmail on that server accept connections from my application on the other server? I modified sendmail.mc from DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp, Addr=127.0.0.1')dnl to DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp')dnl I have also added to /etc/mail/access: Connect:198.211.117.41 RELAY then ran m4 sendmail.mc > sendmail.cf and restarted sendmail. Trying to connect from my app server with telnet on port 25 to the mail server gives me: telnet: Unable to connect to remote host: Connection refused Am I missing something?

  Read the article

• If i make a mail server can i send bulk email?

  - by Jake Smith

  I work for a small company and we have fallen into the fad of "email campains" a.k.a Junk mail. So far the company has gotten a subscriber list from our website, and paid a good chunk of change for a emailer program. The problem is, Our list has close to 4,000 people on it and growing. with gmail only allowing 100 emails per account through on SMTP and I am on a tight budget so I cant hire anyone else. I was thinking of doing a dedicated mail server off of the website server we have running in the office. Is it possible? to make emails on your own server, and then send it through your own SMTP? if it is, what software would I need and is if free or low cost at least. We run a WAMP server, i set it up just for information, but i could switch it to lamp or whatever if need be. Thank you for your time and youre answers

  Read the article

• Is there a lightweight MTA for Ubuntu 9.10 Desktop?

  - by Joe Casadonte

  I'm writing a Perl script to run as a cron job, and I want to email results & errors to a local account on the laptop. I'd like something that can talk SMTP (do any MTAs not adhere to SMTP?). I use Thunderbird 3, so I'll also need a POP/IMAP server (unless T-Bird can read straight from an mbox file; I'll have to check into that). No need for spam controls as I'll lock it down real tight, only accepting mail originating from the laptop itself. Thanks!

  Read the article

• Gmail not accepting mail

  - by BARON'S

  I'm setting up a new mail server with postfix dovecot and things are working fine except this strange thing. I'm unable to send email to gmail addresses. The log shows status sent. However, I checked there is no email in gmail mailbox. Jul 8 13:10:08 example postfix/smtp[5294]: B53B637C233: to=<[email protected]>, relay=gmail-smtp-in-v4v6.l.google.com[173.194.79.26]:25, delay=2.2, delays=1.5/0.08/0.49/0.14, dsn=2.0.0, status=sent (250 2.0.0 OK 1341727808 nc7si50672387pbc.75) However, my other account can send to gmail. After several testing, then I found that if I first send email from gmail, then subsequently I can send from my server and email received by gmail. I don't have this issue with Yahoo. What could be the problem?

  Read the article

• mysql single database relocation

  - by asdmin

  I would like to know if it's possible to operate different databases on different filesystem locations. Background: we are a hosting service, which hosts mysql, web, and smtp to it's customer, but all our services (sql, smtp, http) are located in a different place. We are going to assign a single logical volume to a customer, which will accommodate the customer's mailing, weppages and (hopefully) sql database. Web pages and mailing are already covered, but I am not able to find a configuration setting which would enable me to specify the location of a database (the directory where mysql stores the DB). Let me please highlight, the target here is to relocate different databases to different locations in the filesystem, not moving them from a single place to an another (single) place. Also please do not bother answering with soft and hard symbolic links. ;) Thanks

  Read the article

• where is this SFP problem occuring

  - by Saif Khan

  Hi, Inbound mail to a specific user is been forwarded to his external mailbox at another domain. Add mails are routed correctly with the exception of one domain. When mail are sent to users of my domain, including that user, the mails are delivered to everyone except him...as the mail admin I am getting the message The following recipient(s) cannot be reached: usermailbox on 1/10/2011 1:27 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. email.speedimpex.com #5.5.0 smtp;587 [email protected] sender domain does not match SPF records I am sure this has nothing to do with my mail server, however, can someone confirm?

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• how install minimum domain email piping to script in centos?

  - by Adam Ramadhan

  hello i have search google on a simple tutorial on how to make a piping email. first how does really email technically work? "stmp is a process that binds to 25, waiting for email request that goes in from another stmp process(in another server) determined by the domain MX route that will send the message to port 25 if any email goes though the MX.domain.tld" that is in a nutshell how emailing work, am i right? or there is something wrong here? second, so if im right, we need to set a SMTP server so we can receive incoming emails from MX SMTP route right? ive googled though google and found two best STMP servers from my opinion, they are EXIM and POSTFIX, can anybody give us a simple tutorial installing and setting up an email piping for a fresh installed linux/centos? example *.domain.tld -> allinonepipe.php thanks.

  Read the article

• mail refused by port 25

  - by shantanuo

  When I try to send a mail from my Linux (CentOS) server, the exit status is 0, but the mail never reaches it's destination. The /var/log/maillog file has an entry something like this... Mar 18 06:33:01 app11 postfix/qmgr[22454]: F18FD9F6074: to=<[email protected]>, relay=none, delay=0.01, delays=0/0/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to alt4.gmail-smtp-in.l.google.com[74.125.45.27]: Connection refused) Am I blocked by google? I tried to send a mail to some other mail server and got the similar result. Mar 18 06:33:01 app1 postfix/smtp[15460]: connect to acsinet11.xxx.com[111.222.333.444]: Connection refused (port 25) How do I correct this problem?

  Read the article

• Sendmail problem

  - by trobrock

  I am trying to get my server to be able to send email from PHP. Currently it is using send mail, but whenever I try to send mail to a gmail address I get this sort of response: --o54Mqd5s008981.1275691959/ServerName Content-Type: message/delivery-status Reporting-MTA: dns; ServerName Received-From-MTA: DNS; localhost Arrival-Date: Fri, 4 Jun 2010 22:52:38 GMT Final-Recipient: RFC822; [email protected] Action: failed Status: 5.7.1 Remote-MTA: DNS; gmail-smtp-in.l.google.com Diagnostic-Code: SMTP; 550-5.7.1 [xxx.xxx.xxx.xxx] The IP you're using to send mail is not authorized Last-Attempt-Date: Fri, 4 Jun 2010 22:52:39 GMT How can I set this up to relay through a google account that I own? Is sendmail the best thing to use, or should I switch to Postfix or something? This is on an Ubuntu Server 9.10

  Read the article

• SSL Certificate

  - by Dremarturg

  Hey, I have a mail-server running and I want to buy a SSL-Certificate as they are pretty cheap now. I use mail.domain.com as reverse-DNS, POP3 and SMTP clients use mail.domain.com (some use pop3.domain.com and smtp.domain.com) for sending and receiving e-mails. The SSL-Submission asks me for a domain - is it mail.domain.com or domain.com as I do not have a Wildcard-SSL? I just want to use it for Mail. Or is it possible to use it for both by using domain.com? (Apache and Postfix/Courier on the same server and IP)

  Read the article

• Mail Server on Google Apps, Hotmail Blocks

  - by detay

  My company provides private research tools (sites) for companies. Each site has its own domain name and users. These sites need to be able to send outbound mail for notifications such as password reminders. We started using Google Apps for this purpose, but lately we are having tremendous problems with mailing, especially to hotmail. I added the SPF record as required. Mxtoolbox says my domains are not in any blacklists. I was told to contact https://postmaster.live.com/snds/addnetwork.aspx and add my network. Given that I am using google's mail servers for sending mail, should I add their IP address for registering my domain? Or should I add my server's IP even though I am not hosting the mail server on it? Here's an example of a returned message; > Delivered-To: [email protected] Received: by 10.112.1.195 with SMTP > id 3csp62757lbo; > Mon, 10 Dec 2012 10:42:55 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; > d=gmail.com; s=20120113; > h=mime-version:from:to:x-failed-recipients:subject:message-id:date > :content-type; > bh=x41JiCH75hsonh+5c/kzwIs7R8u4Hum2u396lkV3g2w=; > b=v+bBPvufqfVkNz2UrnhyyoGj1Cuwf6x/yMj0IXJgH27uJU7TqBOvbwnNHf33sQ7B9T > uGzxwryC2fmxBh72cGz1spwWK348nUp6KK73MXKnF8mpc3nPQ8Ke+EQpSPeJdq/7oZvd > scZTGpy//IiGEUDU5bJ7YPqYXQRycY5N6AF5iI4mWWwbS4opybp3IKpDDktu11p/YEEO > Fj9wnSCx3nLMXB/XZgSjjmnaluGhYNdh3JFtz83Vmr50qXTG/TuIXlkirP73GfGvIt2S > 7sy8/YdEbZR92mYe9wucditYr7MOuyjyYrZYCg+weXeTZiJX1PfBVieD+kD9MnCairnP > rQeQ== Received: by 10.14.215.197 with SMTP id e45mr52766237eep.0.1355164974784; > Mon, 10 Dec 2012 10:42:54 -0800 (PST) MIME-Version: 1.0 Return-Path: <> Received: by 10.14.215.197 with SMTP id > e45mr65950764eep.0; Mon, 10 Dec 2012 10:42:54 -0800 (PST) From: Mail > Delivery Subsystem <[email protected]> To: > [email protected] X-Failed-Recipients: ********@hotmail.fr > Subject: Delivery Status Notification (Failure) Message-ID: > <[email protected]> Date: Mon, 10 Dec 2012 > 18:42:54 +0000 Content-Type: text/plain; charset=ISO-8859-1 > > Delivery to the following recipient failed permanently: > > *********@hotmail.fr > > Technical details of permanent failure: Message rejected. See > http://support.google.com/mail/bin/answer.py?answer=69585 for more > information. > > ----- Original message ----- > > Received: by 10.14.215.197 with SMTP id > e45mr52766228eep.0.1355164974700; > Mon, 10 Dec 2012 10:42:54 -0800 (PST) Return-Path: <[email protected]> Received: from WIN-1BBHFMJGUGS ([91.93.102.12]) > by mx.google.com with ESMTPS id l3sm26787704eem.14.2012.12.10.10.42.53 > (version=TLSv1/SSLv3 cipher=OTHER); > Mon, 10 Dec 2012 10:42:54 -0800 (PST) Message-ID: <[email protected]> MIME-Version: 1.0 > From: [email protected] To: *********@hotmail.fr Date: Mon, 10 Dec > 2012 10:42:54 -0800 (PST) Subject: Rejoignez-nous sur achbanlek.com > Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: > base64 > > ----- End of message -----

  Read the article

• Mail Stuck in Backend Exchange Queue

  - by Kyle Brandt

  I have a message that has and is stuck in a queue on my backend mail server. The queue is: Internet Mail SMTP Connector (MY_FRONT_END_SERVER_NAME)-524350ff... It is in state retry with 183 failures. It is only one message and all other mail is flowing. The message is not particularly large. My limited understanding, a guess really, is that this message should get handed off to the front end mail server and sent to the remote hosts for which it is destined, so it should even matter if the remote host is up. However, I can telnet to the smtp provider of that host. How can I find out why it is stuck in this queue, and can I force it out somehow (unfreeze doesn't help me)?

  Read the article

• proxy server software for windows xp

  - by This is it

  Hi Is there a proxy software for Windows XP that can support HTTP, HTTPS, SMTP, IMAP, POP, FTP, etc. (the more the better)? We tried apache mod_proxy but FTP doesn't work through it (at least not all features). Maybe we don't need proxy server for following requirements (we are open for suggestions): - Centralized access point to internet for several users (proxy server?) - Users use Browser (firefox/IE - HTTP, HTTPS), Outlook (SMTP, POP, IMAP) - Logs to see where did users go on internet - Possiblity to connect to FTP server Windows xp, which is used as proxy server, is a virtual machine, and all other users/clients are virtual machines as well (Hyper-V)... Thanks for suggestions. Cheers

  Read the article

• Windows log file monitor that supports custom events (eg. sending an email when it detects the string "ERROR")

  - by ilitirit

  I know this question has been asked several times before but I can't seem to find a solution for my requirements. I currently use BareTail, which works wonderfully except that it doesn't support custom events besides line highlighting. I'm also trying TailForWin32. It has a SMTP plugin but it seems to be in beta status, and the highlighting seems limited. It also doesn't handle rolling log files very well (a blocking dialog box pops up, whereas BareTail just rolls over naturally). All I really need is something like BareTail that supports custom events. First prize would be a tool with a plugin-based architecture so I can use my own messaging plugins, but anything that supports SMTP mail would be fine as well.

  Read the article

• Single email Stuck in Backend Exchange Queue

  - by Kyle Brandt

  I have an outgoing message that has and is stuck in a queue on my backend mail server. The queue is: Internet Mail SMTP Connector (MY_FRONT_END_SERVER_NAME)-524350ff... It is in state retry with 183 failures. It is only one message and all other mail is flowing. The message is not particularly large. My limited understanding, a guess really, is that this message should get handed off to the front end mail server and sent to the remote hosts for which it is destined, so it should even matter if the remote host is up. However, I can telnet to the smtp provider of that host. How can I find out why it is stuck in this queue, and can I force it out somehow (unfreeze doesn't help me)?

  Read the article

• Configure nagios to alert only when there are no mx servers available

  - by Aseques

  In my company there are two redundant MX servers, I would like to tell nagios to wake me in the night ONLY if both servers are down. The default behavior is to alert whenever one of the MX servers is down. I would like to set a timeperiod i.e. 23:00 to 06:00 when nagios only alerts me by sms in case both servers are down. I am using nagios3 but I couldn't find something like this in the docs. Solution: I've used this check_command in a service called MXservice: check_command check_service_cluster!"MXservice"!2!1!$SERVICESTATEID:mx1:SMTP$,$SERVICESTATEID:mx1:SMTP$ Thanks for all your help

  Read the article

• How to enable Postfix filter on OS X server (Lion) without getting overwritten?

  - by mjbraun

  I have a Postfix after-queue content filter that works fine on stock Ubuntu Postfix install. However, on a OS X Lion Server I'm testing out, I see this "auto-generated" language in the master.cf file: # ==== Begin auto-generated section ======================================== # This section of the master.cf file is auto-generated by the Server Admin # Mail backend plugin whenever mails settings are modified. smtp inet n - n - 1 postscreen smtpd pass - - n - - smtpd -o receive_override_options=no_address_mappings The problem is, to enable the filter the same area of the master.cf file has to be changed to have an entry like this: smtp inet n - - - - smtpd -o content_filter=mytest_filter:dummy So, it looks like the line would be blown away every I make a change in Server Admin. Is there a better place for me to put the call to the filter such that it's persistent? I appreciate any assistance and/or guidance!

  Read the article

• where is this SPF problem occuring

  - by Saif Khan

  Hi, Inbound mail to a specific user is been forwarded to his external mailbox at another domain. Add mails are routed correctly with the exception of one domain. When mail are sent to users of my domain, including that user, the mails are delivered to everyone except him...as the mail admin I am getting the message The following recipient(s) cannot be reached: usermailbox on 1/10/2011 1:27 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. email.speedimpex.com #5.5.0 smtp;587 [email protected] sender domain does not match SPF records I am sure this has nothing to do with my mail server, however, can someone confirm?

  Read the article

• Installing and configuring email server on debian step by step

  - by webprogrammer

  Can anybody tell me how to install and configure email server on debian step by step? What I mean? I have my own server with my dns. There are several sites on it. So I need: 1) Create emails for each domains, for example, [email protected], [email protected], [email protected] ... Where I can create them? Can I create that email list in file(s), not in mysql? 2) I need send emails from php scripts over smtp-server. 3) I need to read emails in Thunderbird (on Ubuntu, if that matters) and send emails from it over smtp of my domains. I have already installed postfix and dovecot. What's next? Can somebody provide me some HowTos?

  Read the article

• Can't obtain reference to EKReminder array retrieved from fetchRemindersMatchingPredicate

  - by Scionwest

  When I create an NSPredicate via EKEventStore predicateForRemindersInCalendars; and pass it to EKEventStore fetchRemindersMatchingPredicate:completion:^ I can loop through the reminders array provided by the completion code block, but when I try to store a reference to the reminders array, or create a copy of the array into a local variable or instance variable, both array's remain empty. The reminders array is never copied to them. This is the method I am using, in the method, I create a predicate, pass it to the event store and then loop through all of the reminders logging their title via NSLog. I can see the reminder titles during runtime thanks to NSLog, but the local arrayOfReminders object is empty. I also try to add each reminder into an instance variable of NSMutableArray, but once I leave the completion code block, the instance variable remains empty. Am I missing something here? Can someone please tell me why I can't grab a reference to all of the reminders for use through-out the app? I am not having any issues at all accessing and storing EKEvents, but for some reason I can't do it with EKReminders. - (void)findAllReminders { NSPredicate *predicate = [self.eventStore predicateForRemindersInCalendars:nil]; __block NSArray *arrayOfReminders = [[NSArray alloc] init]; [self.eventStore fetchRemindersMatchingPredicate:predicate completion:^(NSArray *reminders) { arrayOfReminders = [reminders copy]; //Does not work. for (EKReminder *reminder in reminders) { [self.remindersForTheDay addObject:reminder]; NSLog(@"%@", reminder.title); } }]; //Always = 0; if ([self.remindersForTheDay count]) { NSLog(@"Instance Variable has reminders!"); } //Always = 0; if ([arrayOfReminders count]) { NSLog(@"Local Variable has reminders!"); } } The eventStore getter is where I perform my instantiation and get access to the event store. - (EKEventStore *)eventStore { if (!_eventStore) { _eventStore = [[EKEventStore alloc] init]; //respondsToSelector indicates iOS 6 support. if ([_eventStore respondsToSelector:@selector(requestAccessToEntityType:completion:)]) { //Request access to user calendar [_eventStore requestAccessToEntityType:EKEntityTypeEvent completion:^(BOOL granted, NSError *error) { if (granted) { NSLog(@"iOS 6+ Access to EventStore calendar granted."); } else { NSLog(@"Access to EventStore calendar denied."); } }]; //Request access to user Reminders [_eventStore requestAccessToEntityType:EKEntityTypeReminder completion:^(BOOL granted, NSError *error) { if (granted) { NSLog(@"iOS 6+ Access to EventStore Reminders granted."); } else { NSLog(@"Access to EventStore Reminders denied."); } }]; } else { //iOS 5.x and lower support if Selector is not supported NSLog(@"iOS 5.x < Access to EventStore calendar granted."); } for (EKCalendar *cal in self.calendars) { NSLog(@"Calendar found: %@", cal.title); } [_eventStore reset]; } return _eventStore; } Lastly, just to show that I am initializing my remindersForTheDay instance variable using lazy instantiation. - (NSMutableArray *)remindersForTheDay { if (!_remindersForTheDay) _remindersForTheDay = [[NSMutableArray alloc] init]; return _remindersForTheDay; } I've read through the Apple documentation and it doesn't provide any explanation that I can find to answer this. I read through the Blocks Programming docs and it states that you can access local and instance variables without issues from within a block, but for some reason, the above code does not work. Any help would be greatly appreciated, I've scoured Google for answers but have yet to get this figured out. Thanks everyone! Johnathon.

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >