Search Results

Search found 9276 results on 372 pages for 'chris driver'.

Page 309/372 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Alienware M17x R3: Possible downclock

  - by Ywen

  I installed recently Kubuntu 11.10 32 bits (had graphics driver issues, wanted to try on 32 bits version) on my new Alienware M17x, with a Core i7-2670QM CPU. Cores are supposed to be clocked at 2.2 GHz, however the output of $ cat /proc/cpuinfo | grep -i "hz" gives me: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 If useful, the AC adapter is plugged in (yet the ouput is the same when the computer is powered only by the battery) and I have Firefox and Eclipse running. Does /proc/cpuinfo reflect a possible automatic downclock made to save power if processor load is low or is this output abnormal? EDIT: Ok, I checked and yes, the ouput does vary in function of the load. I reach 2.2 GHz when needed. But my following problem remains. I was checking my CPU clocking because I experienced poor performances when reading 720p video files on Ubuntu with VLC or mplayer when on battery (and I believe VLC by default only uses CPU, not GPU to decode), whereas I haven't got such problems with VLC on Windows (which made me think it wasn't coming from a BIOS option, plus every option in the BIOS regarding the CPU is turned ON).

  Read the article

• Brother MFC-J470DW scan function "Check Connection"

  - by user292599

  I have a Brother MFC-J470DW printer that I have connected to a Linux desktop (running Ubuntu 14.04) using a wireless router network. The printer works fine for printing and copying, but now I want to add the scan function. To set up the scan function, I went to the Brother web page for this printer: http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as&os=128 and under Scanner Drivers selected "Scanner driver 64bit (deb package)", "Scan-key-tool 64bit (deb package)", and "Scanner Setting file (deb package)". For each package, I clicked the EULA, and selected "open with Ubuntu Software Center". Then after the USC window pops up, I click on Install and the red line goes from left to right. In each case, the USC window then had a green checkmark and the Install box changes to Reinstall (that's how you know it worked). So now I try it out. Hitting the Scan button on the printer, selecting "Scan to file", and hitting ok produces the message "Check Connection". I checked the Brother Linux Information FAQ (scanner) page and the 14th question seems the same as mine: When I try to use the scan key on my network connected machine, I receive the error "Check connection" or I can not select anything except "scan to FTP". I explored the solution given for this FAQ, but found from ifconfig that I am already using eth0, the default setting, so presumably that is not the problem. I also found brscan-skey installed in /usr/bin and did drrm@drrmlinux2:~$ brscan-skey -t drrm@drrmlinux2:~$ brscan-skey but that didn't help - I still get the "Check connection" message. What can you suggest to fix this problem?

  Read the article

• Why is my wireless significantly slower on Ubuntu 12.04, as compared to windows 7?

  - by user89266

  I'm dual booting 12.04, and Win7. Just a tiny bit of background, I'm starting to get more and more interested in programming and 3d modelling, so I'd like to learn more about ubuntu as a result of those interests. Still a complete newb though! Anyway, When downloading on windows, I get 1.5mb/s easy. Now I swap over to Ubuntu, and it hasn't topped 150 kb/s since I installed it some 6 months ago. I'd downloaded most of my programs on windows, so I never really noticed it, but as I'm committing to ubuntu more, it's starting to hinder me. I'm with Shaw, on their Highspeed 20, which gives me 20 mbps down, and 6mbps up. Speedtest.com shows me varying figures somewhat close to what shaw says they give on both windows and ubuntu, which is to be expected, given that it is shaw afterall... So, I don't know what you guys need to know, and I know even less about how to get it to you. Whatever information you guys need, tell me how to get it, how to get it up here, and i'll get it on here! I thought it might be that I'm using a proprietary driver, when an open sourced one would work better? But I really have no clue. Any help would be very much appreciated. Thanks guys!

  Read the article

• nvidia segfault crashes XServer (12.04 fresh install)

  - by Sébastien GILLES

  I am on a fresh install of 12.04, and my video card is a Quadro FX 570, which appears to be supported (see output of unity_support_test below). But my Xserver crashes randomly and causes my session to just shutdown and bring me back to the logging screen. This happens several times per hour. After checking syslog it that a segfault in the nvidia driver is the cause of the problem: Jun 13 11:14:17 lima kernel: [86569.828982] Xorg[17940]: segfault at ffebeb69 ip b4c8f7aa sp bf8076dc error 4 in nvidia_drv.so[b47a7000+706000] Jun 13 11:14:36 lima gnome-session[18119]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :3.#012 The funny thing is that as I was reporting this bug, my xserver crashed again (!) and this time I got another error message: Jun 13 11:29:39 lima kernel: [87491.106441] NVRM: Xid (0000:02:00): 6, PE0001 Jun 13 11:29:39 lima gnome-session[26493]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :4.#012 Any idea as to what can be the problem given that i am on a fresh install with a supported video card ? Sébastien == Output of unity_support_test $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 570/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes

  Read the article

• nvidia graphics resolution problem

  - by Deepak Adhikari

  I am currently using ubuntu 12.04 I have acer aspire timelinex 3830tg with 2GB nvidia GeForce GT540M graphics card To enable my graphics card I followed following steps. 1.) I activated nvidia_current and nvidia_current_updates from additional drivers 2.) sudo nvidia-xconfig 3.) then reboot Following these steps I got following errors 1.) my resolution is 640x480...(there is no option of 1366x768 in display...previously there was 1366x768 when nvidia-xconfig command was not entered) 2.) when I open nvidia-settings it shows me following error "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root) and restart the X server." Problem need to be solved 1.) Change resolution to 1366x768 2.) Also how to check my nvidia graphics working or not Please some one please help me to solve these issues...I am seriously in need of my graphics card... I wan't my nvidia graphics card work as my intel graphics smoothly I am not willing to use bumblebee with regards, ubuntu user

  Read the article

• Why is my Ubuntu 10.10 CD not booting?

  - by Tom Brito

  I have downloaded Ubuntu 10.10 and burned the ISO but it will not boot. I discarded problems with the ISO, as I've downloaded from the official website with no errors, and burned it with no errors. I discarded problems with the burning, as looks like it was recorded with no errors here and later in another computer. I discarded problems with my DVD reader as other cds boots fine. I'm currently using Ubuntu 9.10, I know I can upgrade via internet, but I have this same problem with my Windows XP cd, so I really would like to discover what's going on here.. My Ubuntu 9.10 cd boots just right, but the new one not. What else can be? Or what more precise tests can I make to discover where's the problem? --More info What happens when I try to boot with the Ubuntu 10.10 cd is that it behavior like there's no bootable cd in the drive. It just don't find the boot on the cd, and start the HD system. My notebook is an Amazon PC Intel Celeron 1.5 with 2Gb memory, a DVD-RW driver, HD samsung with 260GB.

  Read the article

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• What could be causing frequent display freezes?

  - by austen

  I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

  Read the article

• At the time of installing ubuntu, i am getting dark black screen only

  - by faruque

  I am trying to install Ubuntu 12.04 LTS dual boot with Windows 7, but when i click on Try or even Install ubuntu, i am getting black screen only. I can't see any text or anything else. When i see my Laptop's screen from close look, ubuntu in the middle of screen shown but screen is dark black. So because of this i am unable to install Ubuntu on my laptop. Please help in this regard. Following deatails of my laptop. Details of my Laptop: Manufacturer- Acer Aspire 4736 Processor- Intel core 2 duo CPU T660 Graphics driver- Mobile Intel(R) 4 series express chipset family (Microsoft corporation - WDDM 1.1), Current version installed- 8.15.10.2302 In ubuntu 11.04 i know how to boot into nomodeset, but i don't know how to boot through nomodeset in ubuntu 12.04 LTS. Because there is no option shown for F6 key. My laptop is Acer aspire 4736, and my Video/Graphics card shows unknown by ubuntu. Please someone help me. Can changing or upgrading my laptop's graphic card solve this problem..?? If yes then, which graphic card should i go for which is supported by Ubuntu and other Linux distros? Please someone help.

  Read the article

• Ubuntu 13.10 - Black screen after login session

  - by AlexKibo88

  Yesterday, the system asked me if I wanted to upgrade to 13.10 from 13.04. Since that was the first time for me, I decided to proceed and ran the installation without worrying about it. After the system completed the upgrade, my PC was rebooted and the new version of Ubuntu signalled that the desktop would have run in low graphigs mode due to a graphical driver problem. I couldn't manage to fix the issue, so I continued with the low graphics mode... but nothing showed up. I wasn't even able to access one of the TTYs. So I ended up rebooting the system and accessing the recovery mode. I uninstalled all my ATI graphics drivers along with xorg-server and fglrx. After rebooting, I was able to access the login session of Ubuntu, but after confirming my credentials, the desktop wouldn't show up, but instead a black screen appeared with the following message: System program problem detected I couldn't figure out the problem and tried to restore/re-install all the graphics elements I knew. but nothing worked. The screen still remains black and won't show the icons nor the Unity bar. What would you advise me to do? Should I try launching a fresh install of the OS from the live CD? Thank you.

  Read the article

• Help in decide the partition to install ubuntu

  - by G.Ashwin kumar

  I have a PC running with windows 7 ultimate 64 bit version with 4 gig Ram. I have a 320 gig hard disk , in which I have allocated 120 gig for windows 7, 100 gig for NY files(named ashwin in windows) and rest 80-90 gig partitioned but empty NTFS partition.Now where do I install Ubuntu so that windows and data is safe. I got the option install with windows I selected it , it then shows select drive(SCSI1 (0,0,0) (sda) -320.1 GB ATA WDC WD3200AAJS-6) and allocate driver by dragging the divider below which shows 66.5gb and 59.3 GB respectively. Which one do I go with? I clicked advance partitioning it shows five devices: device , type, m.point ,size.(mb), used(mb)......... /dev/sda1, NTFS, 104 , 35 (windows 7 loader) /dev/sda2, NTFS, 104752, 23604 /dev/sda3, NTFS, 125829, 10161 /dev/sda5, NTFS, 89382, 3221 when I checked size in properties it showed name of drive according to windows, used.Gb, free, total. ashwin, 10.2, 115.7, 125.8 c drive, 23.6, 81.1, 104.8 new volume, 92.6mb, 89.3, 89.4 except mentioned everything in gigabytes.ignore the last dots. I want to install it in new volume or using that space how do I do it? Explain in detail I'm a beginner.

  Read the article

• Nvidia 740M still not working after Bumblebee installation

  - by Jon

  first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

  Read the article

• Accessing hardware via USB by proprietary windows software using Wine

  - by Carlos Eugenio Thompson Pinzón

  I have this proprietary software that access some hardware using USB. Over a year ago I tried to install it on a Ubuntu OS using Wine (the program is written for Windows). The UI seemed to work just fine but it had no access to the USB port. Back then I had to license a Windows copy in order to get the job done. Now, that Windows version we where using is deprecated and it is not longer available and available versions cost trice as much. So it is time to give Linux another try. How can I ensure that the USB is available for a Wine application? Neither the application nor the hardware install any driver, the app just pool all available USB drivers and make a handshake if it recognizes that the hardware is present. I want to minimize the test cases before abandoning Linux one more time. Update I've just tried again (with the hope an upgrade was made from last year), and it is not working. The proprietary windows app is not finding the hardware.

  Read the article

• Small, fast shopping cart setup

  - by R..

  I'm looking for an open source shopping cart solution that's simple and easy to setup. The requirements are: Quick setup for someone familiar with *nix webservers. Checkout via PayPal (other payment methods not needed). Customers should not have to create an account to make a purchase. At least a minimal level of inventory control. Ability to print/export a list of orders in compact form. Any recommendations for something I should try? Ability to get it up and working quickly is really my priority right now; if it's not ideal, it can be replaced (or, as I'm looking for open source, I can adapt it to fit the requirements better) at a later time. Edit: Really what I'm looking for is simplicity. This will be for a small local business, and the orders will consist of 1-10 items that are being delivered by a driver who needs a simple list of what each customer received when making delivery. Looking like a giant online computer/electronics/etc. store is definitely not a desirable quality. The simpler the interface presented to customers (who are used to purchasing through dumb web forms and paying COD), the better.

  Read the article

• Sharing swap space between Windows and Ubuntu

  - by Leftium

  This Linux Swap Space Mini-HOWTO describes how to share swap space between Windows and Linux. Do these instructions still apply to Ubuntu in 2011? How should I modify the steps for Ubuntu? Is there a better approach to sharing swap space? Based on the HOWTO, it seems best to create a dedicated NTFS swap partition: Dedicated so the swap file will be contiguous and remain unfragmented. NTFS so both Windows and Ubuntu can read/write to it. (Or is FAT32 better for this purpose?) Then, configure Ubuntu to prepare the swap space for use by Linux on start up; by Windows on shut down. I want to dual boot Ubuntu and Windows 7 on my X301 laptop. However, my laptop only has a 64 GB SDD, so I would like to conserve as much disk space as possible. update: There is an alternate method using a special driver for Windows that let you use a Linux swap partition for temporary storage like a RAM-disk, but it doesn't seem to be as good...

  Read the article

• Ubuntu 11.10 and Mobility radeon HD 4570, 512MB can't find working drivers

  - by Slavak

  i'm pretty new to Linux and my new problem is ATI drivers. When i installed Ubuntu then i had black screen issue with the blinking in left upper corner, fixed it with F6 and set the "nolapic" mode, can boot only with "nolapic". Now the problem is the drivers. The suggested drivers, from the "Additional drivers" are not working. Always freeze at the login screen, the divers are: ATI/AMD proprietary FGLRX graphics driver Tried this method: http://drivers.downloadatoz.com/tutorial/28786,how-to-fix-amd-catalyst-11-10-not-working-on-ubuntu-11-10-issues.html? but this method break it down really hard, not ever that helped anymore: sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists); sudo apt-get remove --purge fglrx*; sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon ; sudo apt-get install xserver-xorg-video-ati; sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core; sudo dpkg-reconfigure xserver-xorg Now i'm here with a fresh install and i cant find anything that works, can someone help me please! I like Ubuntu, but i need to get rid of the lagg, or its Windows 7 only for me then :( Thanks for reading!

  Read the article

• Trying to make ZeroRadiant work on Lubuntu 11.10

  - by maniat1k

  I'm looking to use ZeroRadiant to work on ubuntu, it's to create maps on urban terror, I know that works on windows and mac. I found this HOWTO but could not make it work. I've got stock on this when I do. ~/ZeroRadiant-src$ scons target=radiant,q3map2 config=release at the end shows me this: collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. there's a note on the how to that says: If you get other errors, you may try asking for help in the GtkRadiant IRC channel, which is listed on the main ZeroRadiant page. the page does not there and I could find that IRC channel. EDIT thanks to @jokerdino in the chat sow me this If you have the proprietary NVIDIA driver installed and you get the following error when executing the build target above: /usr/bin/ld: cannot find -lGL collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. then you should install one of the nvidia-glx-dev* packages as mentioned above in Step A, then try to execute the main build target to compile GtkRadiant again. I don't have nvidia; I do have ATI AMD Radeon HD 6320, and looks like it works. GL_VERSION: 4.1.11251 Compatibility Profile Context GL_VENDOR: ATI Technologies Inc. GL_RENDERER: AMD Radeon HD 6320 Graphics I'm think I do have video issues but.. how do I detect this? how can I continue?

  Read the article

• Ubuntu doesn't load, can't even open a terminal to type commands, even after boot repair

  - by Sky

  When I start Ubuntu I only get my desktop picture and am unable to open a terminal to type any commands. When I try a Guest session all I get is a red Ubuntu backdrop, nothing else. I tried boot repair but no improvement. Summary information following boot repair: http://paste.ubuntu.com/8109809/ I can paste some of it here if someone can tell me which part of it is relevant. This all occurred after I tried to remove compizconfig (which I might not have completed), because it's been using up my CPU (running at 50-60% with compiz at the top in System monitor. My laptop has been running very slow since installing Ubuntu so I've been trying to fix that, also website videos play slow and the startup of Ubuntu has been faulty. I also installed a proprietory Nvidia driver (304) before this launcher issue occurred, in an effort to fix my video problem (didn't help anything). Laptop is Dell 620m with Intel Core 2; 1.83GHz, 2 GB RAM, Ubuntu 14.04 (new to Linux); 66GB Ubuntu partition. Everything works fine on the small XP partition of my laptop, but I've moved all my files to the larger Ubuntu portion. I wanted to try some answers I found to similar questions but they all seem to involve commands in a terminal and I can't open a terminal. How can I get the launcher back, along with access to my programmes etc? Thank you for any help.

  Read the article

• Click and Drag from Clickpad stops working after a while 12.04

  - by Jason O'Neil

  I've got a Samsung Notebook (NP-QX412-S01AU) with a touchpad / clickpad. I'm running 12.04 Precise. When I first log into my computer, the touchpad behaves exactly as expected and desired. The longer I stay logged in, it slowly degrades. I'll try describe it. There are 3 ways of "dragging" on this clickpad: (Physical) click and hold with one finger, and drag around while still holding it down. All with one finger. (Physical) Click and hold with one finger, then with another finger drag around to move cursor. Double tap (not a physical click) and on the second tap, hold and drag. I most naturally use option 1, but here's how it works: When I first turn on, options 1, 2 and 3 all work. After a while, only options 2 and 3 work. Later still, only option 3 works. Restarting X causes all 3 to work again. I've compared the output of "synclient" in each of the states, and there was no difference. Anybody know what to look at? Or at the very least, a command I can run to "restart" the mouse driver without restarting X?

  Read the article

• Ubuntu Desktop does not load

  - by Niklas

  If I login on my Ubuntu 14.04, I get the following desktop: This weird behavior appeared after I executed sudo apt-get update && sudo apt-get upgrade and restarted my computer. Don't know why though. To my Ubuntu I have tried the following (nothing seems to work so far) Fix any broken packages: sudo apt-get update sudo apt-get autoclean sudo apt-get clean sudo apt-get autoremove Locate any broken packages and reinstall them: sudo apt-get install debsums sudo apt-get clean sudo debsums_init sudo debsums -cs sudo apt-get install --reinstall $(sudo dpkg -S $(sudo debsums -c) | cut -d : -f 1 | sort -u) Removing some compiz files: rm -r ~/.cache/compizconfig-1 rm -r ~/.compiz Purging of NVIDIA and installing NVIDIA-prime: sudo apt-get install --reinstall ubuntu-desktop sudo apt-get install unity sudo apt-get purge nvidia* bumblebee* sudo apt-get install nvidia-prime sudo shutdown -r now Compizconfig Settings Manager: sudo apt-get install compizconfig-settings-manager export DISPLAY=:0 ccsm // Back to UI and enablement of Unity Plugin Unity replace, which stopped at a while and did nothing afterwards unity --replace Some dconf reset dconf reset -f /org/compiz/ unity --reset-icons &disown Actually dconf did not work and I got this error: error: Cannot autolaunch D-Bus without X11 $DISPLAY Can anybody help me on that? This is my hardware (hope it helps in any way): Intel® Core™ i7-3770 ASUS GTX660TI-DC2-OG-2GD5 (NVIDIA driver is/was installed) ASUS P8Z77-V LX Corsair DIMM 8 GB DDR3-1600 Kit Samsung 830series 2,5" 256 GB (Windows is installed here) Seagate ST31000524AS 1 TB (3/4 are reserved for files; 1/4 is for Ubuntu (16GB swap included))

  Read the article

• browser without gpu support

  - by manuzhang

  Google has an Easter egg that draws 3D graph but when I tried it out on chrome it complained about no WebGL support. I've also tested it on Firefox whose WebGL support was enabled but ended up with the same problem. Thus, I suspect it's an issue of my GPU. Some googling led me to chrome://gpu and here's what I got Graphics Feature Status Canvas: Software only, hardware acceleration unavailable HTML Rendering: Software only, hardware acceleration unavailable 3D CSS: Unavailable. Hardware acceleration unavailable WebGL: Unavailable. Hardware acceleration unavailable WebGL multisampling: Unavailable. Hardware acceleration unavailable Problems Detected GPU process was unable to boot. Access to GPU disallowed. GL driver is software rendered. Accelerated compositing is disabled.: 59302 Mesa drivers in linux older than 7.11 are assumed to be buggy. Accelerated 2d canvas is unstable in Linux at the moment. Version Information Data exported Tue Apr 10 2012 18:35:57 GMT+0800 (CST) Chrome version 18.0.1025.151 (Official Build 130497) Operating system Linux 3.0.0-0300-generic Software rendering list version 1.27 ANGLE revision 988 2D graphics backend Skia I wonder what each of the problem implies and How I may properly deal with it? I'm using Ubuntu 11.04

  Read the article

• Another guvcview issue? Core dump!

  - by user290498

  guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

  Read the article

• cpufreq-selector, cpufreq-info reporting wrong max speed

  - by dty

  Hi, I've just built a new machine with a Core i5-760 CPU. Max speed is 2.80GHz (turbo mode notwithstanding). I've also done a vanilla install of Ubuntu 10.10. I've added the cpufreq-selector applet to the top panel, and its menus only allow me to select up to 2.39GHz. If I select the "performance" governor, it also shows 2.39GHz. cpufreq-info reports: $ cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to [email protected], please. analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.20 GHz - 2.39 GHz available frequency steps: 2.39 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.20 GHz and 2.39 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.20 GHz. cpufreq stats: 2.39 GHz:13.74%, 2.26 GHz:0.09%, 2.13 GHz:0.08%, 2.00 GHz:0.08%, 1.86 GHz:0.07%, 1.73 GHz:0.07%, 1.60 GHz:0.08%, 1.46 GHz:0.08%, 1.33 GHz:0.11%, 1.20 GHz:85.61% (15560) [...CPUs 1-3 elided, but similar...] Any idea how to get Ubuntu and the various tools to recognise this as a 2.80GHz processor? And ideally to report the actual speed when running in turbo mode too, but that's not critical. Edit: I should probably add that the BIOS (& Windows) are quite happy that it's a 2.80GHz CPU. Thanks.

  Read the article

• Can't shutdown Ubuntu (Wubi Installation)

  - by zsgre3nd3s7

  I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >