Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 309/678 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

  • Windows 7 won't restart with SSD

    - by JL
    I have this annoying problem that I just can't seem to fix. Recently I upgraded my main boot drive to an OCZ Vertex Turbo (60GB) which is an SSD. I've installed Windows 7 64bit. The drive works, and is really quick... blah blah blah. My problem is when I do a restart, for example click start, then arrow next to shutdown, and restart. The computer will shut down, and do a warm reboot, but it gets stuck where it says loading Windows. Just before the animation starts. So what I have to do is physically press the reset switch on the computer, then it restarts, firing up a menu which offers to launch Windows Startup Repair, so I select "Start Windows Normally". After this I boot in normally, but its damn annoying. Any ideas why this is happening, what I can do to fix it?

    Read the article

  • Ubuntu 9.10 is not starting on netbook

    - by anonymous
    I installed Ubuntu 9.10 onto my external hard drive cause it's cool to be able to borrow a friend's laptop and be able to have my entire system. It works on the 2 systems i tested it on: my desktop and my mom's laptop. I had to work on something earlier so i borrowed my friend's netbook. I started it up, chose Ubuntu 9.10.20 and it got to the Ubuntu loading screen with the 3 people holding hands right before user selection then it suddenly went black. Naturally, i freaked out because it wasn't my laptop. I held the power button down and reset the netbook but the screen was still black, it didn't even show the BIOS. I repeated the process without my hard drive, and it was still black without the BIOS showing up. I had to remove the battery, plug it to a power source, and power up to start the netbook up again. Can anyone tell me what happened?

    Read the article

  • Simple mdadm RAID 1 not activating spare

    - by Nick Liu
    I had created two 2TB HDD partitions (/dev/sdb1 and /dev/sdc1) in a RAID 1 array called /dev/md0 using mdadm on Ubuntu 12.04 LTS Precise Pangolin. The command sudo mdadm --detail /dev/md0 used to indicate both drives as active sync. Then, for testing, I failed /dev/sdb1, removed it, then added it again with the command sudo mdadm /dev/md0 --add /dev/sdb1 watch cat /proc/mdstat showed a progress bar of the array rebuilding, but I wouldn't spend hours watching it, so I assumed that the software knew what it was doing. After the progress bar was no longer showing, cat /proc/mdstat displays: md0 : active raid1 sdb1[2](S) sdc1[1] 1953511288 blocks super 1.2 [2/1] [U_] And sudo mdadm --detail /dev/md0 shows: /dev/md0: Version : 1.2 Creation Time : Sun May 27 11:26:05 2012 Raid Level : raid1 Array Size : 1953511288 (1863.01 GiB 2000.40 GB) Used Dev Size : 1953511288 (1863.01 GiB 2000.40 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Mon May 28 11:16:49 2012 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : Deltique:0 (local to host Deltique) UUID : 49733c26:dd5f67b5:13741fb7:c568bd04 Events : 32365 Number Major Minor RaidDevice State 1 8 33 0 active sync /dev/sdc1 1 0 0 1 removed 2 8 17 - spare /dev/sdb1 I've been told that mdadm automatically replaces removed drives with spares, but /dev/sdb1 isn't being moved into the expected position, RaidDevice 1. UPDATE (30 May 2012): A badblocks destructive read-write test of the entire /dev/sdb yielded no errors as expected; both HDDs are new. As of the latest edit, I assembled the array with this command: sudo mdadm --assemble --force --no-degraded /dev/md0 /dev/sdb1 /dev/sdc1 The output was: mdadm: /dev/md0 has been started with 1 drive (out of 2) and 1 rebuilding. Rebuilding looks like it's progressing normally: md0 : active raid1 sdc1[1] sdb1[2] 1953511288 blocks super 1.2 [2/1] [U_] [>....................] recovery = 0.6% (13261504/1953511288) finish=2299.7min speed=14060K/sec unused devices: <none> I'm now waiting on this rebuild, but I'm expecting /dev/sdb1 to become a spare just like the five or six times that I've tried rebuilding before. UPDATE (31 May 2012): Yeah, it's still a spare. Ugh! UPDATE (01 June 2012): I'm trying Adrian Kelly's suggested command: sudo mdadm --assemble --update=resync /dev/md0 /dev/sdb1 /dev/sdc1 Waiting on the rebuild now... My questions are: Why isn't the spare drive becoming active sync? How can I make the spare drive become active?

    Read the article

  • Stop windows-7 explorer taskbar icon changing for different locations

    - by Timothy Kane
    If I open an instance of Windows Explorer, a button appears on the taskbar; its icon matches the icon of current location in Explorer. E.g. If I've clicked on a drive (e.g. C:) then the taskbar icon changes to the drive icon. If I select the Pictures Library location, the taskbar icon changes to a little picture symbol. How can I stop this behaviour, so that the taskbar icon always shows the same icon, regardless of where I've clicked in Explorer?

    Read the article

  • administraitor denies command prompt

    - by roxas383
    I looked at the command prompt faqs on this webiste and tried to get me to make a new profile but when i went to open it it said "The command prompt has been disabled by your administraitor-click any key to countinue" and when i do it closes which i knew that was going to happen. Is there someway i can stop the admin from blocking my command prompt? oh and i was at school too (Dont know if this helps but i am in the West Allis West Milwaukee school district). Also, is there a way i can hack into the blocking program for my school at all? I don't remember what the program is but it might have to do with vision? I'm not sure but it would be greatly appreciated if someone could help (could i download a program on a flash drive that denies any blocking and/or disabling SafeSearch and plug it in into a computer at my school and use it from the flash drive? Would the school blocking thingy deny it from working?) HELP ME PLEASE!!!!!!!!!

    Read the article

  • WIndows 7 cannot boot - bootrec reports FS not found or corrupt

    - by purecharger
    For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

    Read the article

  • Sabnzbd Installed on Linux NAS

    - by Mike Szp.
    I installed SABnzbd on a linux formatted NAS. Now the directory it downloads to is mapped differently on the NAS itself, because the path that SABnzbd knows about starts in it's own folder. If this sounds confusing let me give you an example: \\MYNAS\Volume_1\ That is the path of the drive on the NAS. I would like my SABnzbd downloads to go to: \\MYNAS\Volume_1\Downloads Right now SABnzbd is installed to: \\MYNAS\Volume_1\ffp\opt\optware\share\SABnzbd And the default download directory (as indicated in SABnzbd is): /ffp/opt/optware/share/SABnzbd/downloads/complete I know that the mapping is different somehow because It is installed on the NAS, but I just am lost as to what I should do. So far, I have tried for the complete folder: /192.168.restofip/Volume_1/downloads/complete /Volumes/Volume_1/downloads/complete /Volume_1/downloads/complete Does anyone know how to change the path so that I can have it download to one of the topmost folders on the NAS instead of having it download to a folder so deep in the drive?

    Read the article

  • what damage can be caused if scandisk is not run before defrag

    - by Justin Gregoire
    Hello, I would like to know what the damage to a drive can be if a scandisk is not performed before a disk defrag. I have looked up some sites that say a scandisk should be run to correct any issues that may be apparent on the system, making sure that the drive is free of errors before a disk defrag is done. I have to perform a defrag on a computer without having physical access to it (using remote connection). I know that the scandisk requires a reboot to the system (causing me to lose my connection) which would be difficult to restart physically if the system does not come back on by itself once rebooted (this has happened before). Any suggestions? Thank you.

    Read the article

  • Operative systems on SD cards

    - by HisDudeness
    I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

    Read the article

  • Installing Linux kernel 2.6.25.14 on RHEL 5.4

    - by aaron
    I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

    Read the article

  • upgrading my computer system for office use

    - by denise ellul
    Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

    Read the article

  • What are the mandatory Linux kernel modules to run inside of ESXi

    - by Marcin
    I'm used to rolling my own kernels for servers, as it nicely minimizes the number of exploits (and the resulting patches) to take care of. In a traditional (bare metal) world, the whole process is about knowing what you have (hardware), and what you need (Ethernet, IPv4, iptables, etc.) In a virtualized environment, some things stay the same (still need Ethernet and IPv4), some things go away (power management), and then there are some new needs (vxnet3, or vmware-tools, even though that's compiled outside of the kernel). So my question mostly concerns itself with the last two categories: what can I remove completely, and what new stuff do I want? For example, what IO scheduler do I want, if all my disk operations are going through another filesystem/scheduler/cache to get to the virtual disk? Do I need hyper-threading enabled, or is the VM going to show them to me anyway as a CPU anyway? Do I need Large Receive Offload turned on, or is that something that the hypervisor's network drivers are going to do for me?

    Read the article

  • Using the same VPC image on multiple workstations

    - by justSteve
    I haven't used an VMs before so brand new to the party. I'm running Win7 off an honest to goodness MSDN license so OS licensing is not an issue. I'd like to think that I could create a VPC image on a USB/eSATA hard drive and move that drive from one Win7-based workstation/laptop to another and I'd have the same services/desktop/computing environment at all of them. I'm a developer working against the IIS7/SQL08 stack with VS10 so i'm working with apps and services as deeply embedded with the OS as you can get. Should I expect to be able to pull this off? thx

    Read the article

  • Hyper-v error starting vm after reboot

    - by mamu
    Hi rebooted hyper-v host running server 2008 r2. After reboot one of my vm is throwing following error. 'The version does not support this version of file format' Out of my all vms this was only set to save state when shutdown. I tried deleting state and start still same error. Tried inspect disk as well edit disk both throw same error when try to open this. What could it be? any way to resolve it?

    Read the article

  • Unable to burn Windows ISO from Fedora

    - by user331947
    First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

    Read the article

  • safeboot and wubi

    - by G S
    Hi, Having read various posts it seems clear that installing Wubi on a machine which already has safeboot installed with disk encryption is a non-starter at the moment - nor is repartitioning the disk it would seem. However while the c: partion is encrypted - it has an NTFS formatted q: partition that is not encrypted and has about 4GB free - so I was wondering if there was any way to install WUBI using that partion. Obvisouly stil need a means of booting into it without stuffing my safeboot booting mechanism. I'm thinking that this should be possible as the safeboot booting mechanism will get me to the boot choice options and thereafter all references in the boot.ini entry for the wubi installtion should be to files on the non-encrypted NTFS partion and so it should be OK and not attempt any changes to my envrypted c: partion (other than adding the extra entry to boot.ini) ? any thoughts? ta

    Read the article

  • Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

    - by Chris C.
    I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

    Read the article

  • Any opinions on Paragon's NTFS for Mac solution?

    - by AngryHacker
    I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. I've been looking at buying Paragon NTFS for Mac OS X 7.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). Can someone tell me whether the product is stable and whether the speed claims are true.

    Read the article

  • How to back up a network volume to my Time Capsule?

    - by Mike
    I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

    Read the article

  • HP Rapid Deployment - Change Data Store Path

    - by David Carreyette
    I am running HP Rapid Deployment (Altiris eXpress Deployment Server 6.9 - Build 164) on an inherited Windows Server 2003 SP2. I need to change the Data Store Path as the default is pointing to the C: drive and there is not enough space there. I would like to set it to the D: drive where there is plenty of space. Reading the documentation: Data store path: Specifies the path to stored packages and files and other DS functions (such as license verification). The default path is C:\Program files\Altiris\express\Deployment Server. Note: Do not use this setting to change the path to the Deployment Share. Modifying this setting does not automatically allow you to use another shared directory other than the express share. To change the Deployment Share shared directory, run a Custom install to establish another location for the Deployment Share. Is there any other way I can change the path as I do not have the install media?

    Read the article

  • The application attempted to perform an operation not allowed by the security policy

    - by user16521
    I ran this command on the server that has the share of code that my local IIS site set to (Via UNC to that share): http://support.microsoft.com/kb/320268 Drive:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\caspol.exe -m -ag 1 -url "file:////\\computername\sharename\*" FullTrust -exclusive on (obviously I replaced Drive with C, and the actual computername and sharename with the one I'm sharing out). But when I run the ASP.NET site, I am still getting this runtime exception: Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

    Read the article

  • Partitioning Software for Windows 7

    - by nunos
    I used to use Patition Magic Pro from Norton to do disk partitioning. Now that I have Windows 7, I have been warned, by the OS itself and later confirmed on the internet, that Partition Magic Pro has compatibility issues with Windows 7. So, I am asking you which software partitioning software do you recommend. It would be great if it was freeware but I know it is hard to find a good parititioning app that's free, so, if you know a good one that's paid, there's no problem and please mention it in your reply. Thanks in advance. P.S. I am aware of "create and format disk partitions feature" of Windows 7, but that's not enough for me. I am using Windows 7 Professional 64 bits.

    Read the article

  • Connect a ssd externally such that hdparm is fully supported

    - by student
    I am just trying some hdparm magic with my new ssd (samsung 840 pro). However I don't want to change my drive over and over so it would be great if I could connect it externally to my laptop. I have a cheap sata-usb Adapter, but I feel it doesn't support the ATA commands send by hdparm. So what's the best way to do this? Are there sata-usb Adapters which fully support the hdparm things? Would it be a good idea to buy a sata-esata adapter to get full control over the drive?

    Read the article

  • Best motherboard power supply combo for backblaze server

    - by jin14
    Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

    Read the article

  • Windows 7 can't copy file - Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved

    - by JJGroover
    Any attempt to copy files larger than about 40 MB from a network share (a SAN running open filer / Samba) to my local machine running Windows 7 always results in the following error and the copy fails: Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved. I've tried copying to my C: drive and a USB drive with the same results. Smaller files copy just fine. Clearly 40 MB is not that big of a file so I'm assuming it is some buggy interaction between windows 7 and Samba perhaps. Google has so far turned up nothing. Can anyone point me in the right direction?

    Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >