Search Results

Search found 1261 results on 51 pages for 'mask'.

Page 31/51 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Connecting Windows XP to Windows 7 directly using cable

  - by TPR

  These are the problems I am encountering. XP can access Windows 7, not the other way around (which is fine, because I don't need it the other way currently) File transfer is too slow like 0.031 MB/s even though netperf and netCPS list around 8-9 MB/s. I disabled firewall on both computers. Both are same workgroup. I left homegroup on Windows 7. Windows 7 sees the connection as unidentified network. 10.1.1.2 (XP) and 10.1.1.1 (Windows 7) Subnet mask 255.255.255.0 Default gateway and DNS are empty for both of them. Both computer are connected to internet using wireless (using home network), and both of them are connected to each other using wire! If anybody has any pointers, do let me know. I have no problem doing such setup with both computers being Windows 7. This time one of them is XP though, and that seems to be the problem.

  Read the article

• How can I connect via SSH (Putty) to my VMWare machine (Ubuntu)?

  - by orokusaki

  I'm trying to connect to my VMWare (Workstation 7.1.3) machine (Ubuntu Lucid) via SSH. I've read through some other posts, but I can't figure this out. I ran ifconfig, and got a inet addr: and Bcast and Mask: which appear to be IP addresses. If I try to connect via Putty SSH to any of those addresses, it doesn't work. I also tried connecting to my IP address (from whatismyip.com). Note: This is all taking place on the same desktop computer.

  Read the article

• How can I connect via SSH (Putty) to my VMWare machine (Ubuntu)?

  - by orokusaki

  I'm trying to connect to my VMWare (Workstation 7.1.3) machine (Ubuntu Lucid) via SSH. I've read through some other posts, but I can't figure this out. I ran ifconfig, and got a inet addr: and Bcast and Mask: which appear to be IP addresses. If I try to connect via Putty SSH to any of those addresses, it doesn't work. I also tried connecting to my IP address (from whatismyip.com). Note: This is all taking place on the same desktop computer.

  Read the article

• ISA Server Route Add Question

  - by Kip

  Hi All, I have a situation where I have and ISA 2006 server (on Win2k3) that has an internal and an externaly facing NIC's. All works fine but I need to add a couple of routes for the following reason: Our monitoring software is on a different network. Our Terminal server is on a different network. Currently, access to the internet, through this proxy server, from the terminal server fails. Also, monitoring of the ISA server via a remote monitor or the installed agent talking to the remote monitor (BMC) also fails. The default enterprise rule on ISA blocks the traffic as I beleive it doesn't trust / know about those networks. Here is my routing table: I need to add a couple of address, but this one being the main one: 192.168.245.137 / mask 255.255.255.192 / gateway 192.168.245.129 But I can't get it to work. Routing is not my strong point but at the moment have no one else available to help. Can you offer any assistance? Please ask if you need more info

  Read the article

• Ubuntu, No wireless networks found after correctly installed madwifi

  - by Peter

  Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

  Read the article

• Is there a security risk for allowing people to set their DNS so their own subdomains can be route to my server?

  - by DantheMan

  Lets say that I have a web application, built in Django and deployed with Nginx. Is it a good idea to offer a service that allows customers to request that a subdomain can be pointed at it. I figured this: If I dont allow this, then some companies wont want to access the service from http://mydjangoappmadeupname.com/bigcorporation/ They would rather access it through http://service.bigcorporation.com That would effectively mask that they are using an outside resource. Is there a significant risk that I am overlooking? Also do you think it would be easier to just set things up in Django to handle it, allowing Nginx to accept all domains and then pushing them to Django which would filter out if they are allowed or not, or would it be better to just update my Nginx log each time a client wanted this changed?

  Read the article

• iPhone Cannot log into WiFi suddenly [closed]

  - by Stanley

  I suddenly get into this strange problem. My iPhone has been using the WiFi setup at my home for more than a year. Suddenly it cannot connect to the internet despite still having the full WiFi signal icon. Have an older iPhone 3 GS and it can still browse the net using the same WiFi. So the wireless router should be working. When I check the non-functioning iPhone, it has the "Router" and the "DNS" entries blank while the functioning iPhone has entries on both of the fields. Also the subnet Mask are different. Please help.

  Read the article

• Weird routing problems with VPN

  - by Borek

  In our VPN setup I have to add a route to my routing table like this: route add 1.2.3.0 mask 255.255.255.0 172.16.1.1 -p Our internal addresses 1.2.3.x then use 172.16.1.1 as their gateway and both my local internet and work VPN can work at the same time. However, when I disconnect from VPN and reconnect again, I can't ping our servers even though the connection status is "Connected". When I do route print my previously added route is listed but it doesn't seem to work. So I try to execute that 'route add' command again and as expected, it tells me that The route addition failed: The object already exists. But - and that's the point - when I now try to ping our servers again, everything works! So every time, I have to execute this route add command that will fail but fix the issue at the same time. Any ideas what I might be doing wrong? My PC is Windows 7 x64, I am Administrator, UAC is enabled and the command prompt is run with elevated privileges.

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• IP Forwarding and Routing in Windows 2008

  - by Danialzo

  I have Hyper-V running on a windows 2008. I got a new ip stack from the data center to be set on my virtual machines. But I have difficulties to set these IPs on my VMs because they are on different network. my current server ip is xxx.xxx.18.6 with MASK : 255.255.255.224 and the GW is xxx.xxx.18.1 my new ip stack is xxx.xxx.168.176/29 I can use RRAS to achieve this. Do I need to create another NIC? How do I make these VMs reachable from outside?

  Read the article

• I would like to start multiple computers at once, What software do I use?

  - by Matt 'Trouble' Esse

  I have turned on Wake On Lan on all of the BIOSes in the PCs and I have a simple batch file that runs a free command wolcmd.exe Wake on Lan Command Line The syntax is as follows: wolcmd [mac address] [ip address] [subnet mask] [port number] The batch file looks a little like this.... wolcmd 009027a324fe 195.188.159.20 255.255.255.0 8900 wolcmd 009024a731da 212.86.64.31 255.255.255.0 8900 It's OK but It's not very user friendly (I need to set this up for other people to use and administer) Can you suggest a Windows (XP/Vixta/7) Alternative with a GUI? Free is cool, but a good paid for version is fine if you think it's worth it! Thanks in advance for your informed suggestions

  Read the article

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• Trouble subnetting...

  - by ???

  I have to learn how to subnet by hand for a test. And I'm having real problems doing it. I keep getting stuck. Here's an example: 138.248.184.17/18 - IP 255.255.192.0 - Subnet Mask 192 = 1100 0000 in binary And I know 184 in the IP address is the "octet of interest". OK I get that far...and then I'm lost. I know I need to set the network bits of 192(I think?) to all 0 for the network ID and then to all 1 for the broadcast ID. Problem is how do I know which part of 11000000 is network and which part is host?

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• Local Area Connection in Slacware 13

  - by asdasd

  I have windows xp and slackware 13 on one computer, and the ISP provided me a new modem. There was manual how to configure it, so i start the web browser and typed it's ip address 192.168.1.1 and the web interface of the modem appeared so i logged in, that was easy. But under slackware, i don't know how to enter in the modem config / web interface. I type in 192.168.1.1 but it's not working. Here's the output of ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:a1:b0:01:18:28 inet addr:169.254.73.8 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:febff400-febff4ff How can i log in into the modem from linux, i.e. find it's assigned ip under slackware ? Thank you.

  Read the article

• How to tell Windows 7 to ignore a default gateway

  - by zildjohn01

  I currently have 2 network cards in my PC -- one connected to an internal network on a router with a disconnected WAN port (10.x.x.x), and one connected to the internet through a consumer router (192.168.0.x). Windows seems to recognize them correctly (my "Network and Sharing Center" lists them as "No Internet" and "Internet" respectively), however when I try browsing the internet it always tries the internal network's default gateway, rather than the one with internet access. Trying to ping a website results in "Reply from 10.0.0.1: Destination net unreachable.". A simple "route delete 0.0.0.0 mask 0.0.0.0 10.0.0.1" fixes the problems, but they return upon reboot, or upon renewing my IP. Is there any way to tell Windows to ignore one NIC's default gateway, or to at least give them priorities?

  Read the article

• CentOS: eth0 not starting on boot

  - by Cameron Aziz

  Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

  Read the article

• Bridge and OpenVPN with shorewall

  - by Javier Martinez

  I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

  Read the article

• How do I force specific permissions for new files/folders on Linux file server?

  - by humble_coder

  I'm having an issue with my install of Ubuntu 9.10 (file server) and its samba permissions. Logging in and reading works fine. However, creation of new directories by users restricts access for other users. For instance, if Bob (Windows user who maps the drive) creates a folder in the directory, Jane (Mac user that simply smb mounts) can read from it, but can't write to it -- and vice versa. I then must go CHMOD 777 the directory for everyone to be happy. I've tried editing the "create/directory mask", and "force" options in the smb.conf file but this doesn't seem to help. I'm about to resort to CRONTABing a recursive chmod routine, although I'm sure this isn't the fix. How do I get all new items to always be 777? Does anyone have any suggestions to fix this ever-occurring situation? Best

  Read the article

• Correct way of bringing network interface down in linux

  - by Karolis T.

  For example: $ ifconfig dummy0 up $ ifconfig dummy0 "192.168.1.190 netmask 255.255.255.0" Calling ifconfig with no parameters shows the interface dummy0 Link encap:Ethernet HWaddr b6:1f:f3:92:6d:20 inet addr:192.168.1.190 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::b41f:f3ff:fe92:6d20/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:1050 (1.0 KiB) How can I bring the interface down so that it doesn't show up in ifconfig ifconfig -a ifconfig dummy0 without rmmod dummy because dummy is used just for example purposes. If there is no way to do that, what "throw-away" IP could I set to it and be safe from any trouble? like $ ifconfig dummy0 down $ ifconfig dummy0 0.0.0.0

  Read the article

• Cannot Ping a server after configuring the Routing and Remote Access Services

  - by stacker

  After configuring the Routing and Remote Access Services to be a both VPN and NAT service, I cannot ping that server anymore from the external side. But when I configure it to be just a VPN server, or just a NAT server, I do able to ping it from the external side. My configuration is like: DC: 192.168.20.11 VPN and NUT: Nic 1: 192.168.20.1, NIC 2: 192.168.147.171 Client: 192.168.147.1 The mask is always: 255.255.255.0 I cannot understand why when configuring the VPN server to be a VPN and NAT, I cannot ping the server anymore.

  Read the article

• Configure TCP/IP to use DHCP and a Static IP Address at the Same Time

  - by Tiago

  My computer is configured to obtain a IP address automatically using DHCP. It only has one network adapter. How to configure an additional static IP address? I found a tutorial for Windows XP, but the procedure didn't work for Windows 7. Is it possible to configure two IP addresses on Windows 7, one being static e another being dynamic? How? The dynamic address I got now is 10.17.11.162. The static IP is 10.17.30.19. The network mask is the same: 255.255.224.0. Both work independently, but I don't know how to use both at the same time.

  Read the article

• Centralize proxy settings for all the application on my workstation

  - by Leonardo

  As a consultant, I used to work at different clients premises. It happens frequently that most of them has specific proxy settings, but not all the application I have installed on my laptop get settings from system preferences, for allowing me to change settings in one place. Some of them bypass system preferences completely, proposing their own mask for entering specific data such as username, host and password. I am looking for a convenient and not much intrusive way to share a common access point on which I could enter data, and maybe persist them. An 'automatic' switching would be ideal, for example based on some network identification, but there's no problem for me to enter data manually. I am not an IT expert, but to explain myself clearly, I am looking for a solution like .pac file is for browsers. Relevant OS I am using are MacOSX and Linux (Ubuntu).

  Read the article

• PTR Record for host in VLSM subnet

  - by paradroid

  I understand that this is the way a PTR record would be made on a Class A subnet (10.100.250.100 255.0.0.0) dnscmd /RecordAdd 10.in-addr.arpa. 100.250.100 PTR host.domain.tld To clarify the syntax, this is what it should be for a Class C subnet (192.168.1.100 255.255.255.0) dnscmd /RecordAdd 1.168.192.in-addr.arpa. 100 PTR host.domain.tld Is that right? Now how do I do this for a host with the IP address 172.31.111.210 on a 172.31.111.192/26 network? I'm not sure how to do this with a classless subnet mask.

  Read the article

• Trying to test Domain Collapsing / Consoldiation validity for SEO purposes

  - by Roy Rico

  At work, we're trying to determine the effectiveness of domain collapsing for SEO purposes. Our current structure is to have multiple web apps served from different servers, such as PUBLIC URLS - directly accessed by users www1.somecompany.com/webapp1 www2.somecompany.com/webapp2 www3.somecompany.com/webapp3 I'm proposing to put an Apache proxy in front of these applications that will mask the different domains and route the requests to proper server PUBLIC URL--------routed/forwarded to-----PRIVATE URL www.somecompany.com/webapp1 <-----> www1.somecompany.com/webapp1 www.somecompany.com/webapp2 <-----> www2.somecompany.com/webapp2 www.somecompany.com/webapp3 <-----> www3.somecompany.com/webapp3 In terms of SEO/page rank value, does this help?

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >