Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 310/1359 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• How to automatically change volume level when un-/plugging headphones?

  - by htorque

  What I want is the following: When I plug in my headphones, I want the sound to be un-muted and set to a specific volume level. When I unplug my headphones, I want the sound to be muted (or set to a specific volume level). Setting the volume levels isn't the problem, but I somehow need to do this when un-/plugging the headphones, so I'm looking for a way to get notified of those events. I quickly found /proc/asound/card0/codec#0 to indicate whether headphones are plugged in or not, so I tried to monitor it using inotifywait and change the volume level based on modified notifications. Unfortunately inotifywait failed because proc isn't an ordinary filesystem. Are there other ways to do this (maybe via PulseAudio)? Audio device: Intel HDA, audio codec: Conexant CX20585.

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• Join Domain and Dos App

  - by Austin Lamb

  ok, So First off yes i have read all the related topics and those fixs are either out of date or dont work. i am running ubuntu 12.04 and i would like to add it to the win2008 server network, after i get that done i would like to mount the F:\ drive of the server somewhere on my linux machine where it can be identified as Drive F:\ by wine or Dosemu if i can achieve all of that i need to find out how to run a MS-Dos 16-bit Point-of-sales Graphic program in ubuntu whether that be through wine, dosemu, or dosBox. it does not matter it just has to be able to read and write to the servers F: drive, operate the dos app, and support LPt1 (i think) for printing reciepts and loading tickets. i am a decently knowledgeable windows tech, at least thats what my job description says.. but this is my first encounter with linux in a work environment, it could prove to very experience changing if i can just prove it as a practical theory and a reasonable solution, and get it to work.. the first step is to get it joined to the domain. i have likewise-open CLI and GUI versions, samba, and GADMIN-SAMBA installed in attempts to get any of them to work. any help in any area is greatly appreciated, especially with the domain joining since it is the first step and what i thought would be the easiest step..

  Read the article

• Installing Ubuntu Desktop on usb stick

  - by Tobias Gårdner

  trying to install Ubuntu Desktop on a USB stick but I do not succeed. First time I tried, the USB stick contained an installation of USB server and I wanted to start over again. However, it complained about partioning. Removed all the partitions from the stick and tried again, hoping that the installer would help me out with partioning... But now the USB stick did not show up at all... Created one partion NTFS on the USB stick and tried again but the only "automated" alternative I get for installing is to overwrite or add Ubuntu to my HDD which already contains Windows, something that I do not want... Do I need to manually create partions on the stick in the installer? Which partitions should I create? The USB stick is 8GB and the machine that I will test it on has 8GB memory. Helpful for any support here. Regards, Tobbe G

  Read the article

• Bluetooth firmware problem in Ubuntu 13.04

  - by chanzerre

  I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

  Read the article

• Can not resolve hostnames on Xubuntu computers

  - by P Curtis

  I have a network of computers which has been running for many years. I have changed two of those to Xubuntu 11.10 and found I can no longer connect by ssh using the host-name from any other machine. I can connect and ping by IP although ping is very slow in one case (~200ms). All other machines are fine including another with Ubuntu 11.10. Host-name resolution works from Xubuntu machines to other networked machines. I am using wins resolution and have checked settings in /etc/nsswitch.conf are the same as my working Ubuntu systems. What is different in Xubuntu networking that I might have missed?

  Read the article

• Lenovo B570 doesn't boot after installation

  - by Alan

  I install my Ubuntu 11.10 64 Bits in my Notebook Lenovo B570. (I remove Win 7). I have no problems to install. But at finish, when it start, it wont boot. It search for another boot device (Network, CD/DVD). Maybe it issue is about SCSI Hard Drive. I try in BIOS set compatible mode SCSI/ATA. It try locate another boot (Networks, CD/DVD). I try to enable compatible mode in BIOS SCSI - SATA and reinstall again. "Will ubuntu be the only os on your computer or is there a 2nd os?" A:Yes. I remove Windows 7 and use All disc to Ubuntu.

  Read the article

• How to restore Windows7 after restore ubuntu bootloader?

  - by Mateusz Rogulski

  At first I will describe my situation in a few points: I have installed Windows7, and then Ubuntu 11.04 on my machine. Then everything works fine and at start of system I have screen from linux where I can choose the system. Then I reinstall Windows7 and install Windows 8 on other partition. Then I can choose between Win7 and win8 when I start system. Then I need my Ubuntu back so I want restore my bootloader from Ubuntu. I boot Ubuntu from USB and in terminal write this commands: sudo fdisk -l Then I get: /dev/sda1 1 13 104391 de Dell Utility /dev/sda2 14 2805 22425601 5 Rozszerzona /dev/sda3 * 2805 41968 314572800 7 HPFS/NTFS /dev/sda4 41968 60802 151282688 7 HPFS/NTFS /dev/sda5 14 2445 19530752 83 Linux /dev/sda6 2445 2805 2893824 82 Linux swap / Solaris Next commands: sudo mount /dev/sda5 /mnt sudo mount --bind /dev /mnt/dev sudo mount --bind /proc /mnt/proc sudo chroot /mnt grub-install /dev/sda I get Installation finished. No error reported.. And when I start my machine I have old Ubuntu start screen to choose system. Ubuntu works well. But There are no Windows 8 option. But my primary problem is when I choose Windows 7 I have: error: no such device ... error: no such disk so I have no idea what can I do. I really need both systems to work. Any help would be appreciated.

  Read the article

• Upgrade fails because of blcr-dkms

  - by Peter Smit

  When I try to update my Ubuntu 10.04 installation to 10.10 I get the following error. Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: Trying to install blacklisted version 'blcr-dkms_0.8.2-13' This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. None of the three applies to me (I think). Now I found that this also affects someone else: https://bugs.launchpad.net/update-manager/+bug/657662 Is there here someone who knows what could be wrong? Or a workaround so that I can install Maverick Meerkat?

  Read the article

• Lock a partition to a few folders

  - by Oxwivi

  I want to have a few folders on a partition whose contents I can freely edit, but outside nothing should be saved. Specifically, I want the folders in my Home (Documents, Music, etc) on a different partition, but rest of the normally hidden folders remain in the main partition with Ubuntu. I can make the files within the Home folders save in another partition using fstab binding, but I still can't think of how to lock the partition from edits outside those folders. I'm open to suggestions of alternatives to binding - but please, no symbolic links.

  Read the article

• Samba shares won't automount on boot from fstab

  - by kelvin

  This question seems to have been asked a few times, but doesn't seem anybody has really solved it yet, at least not for my specific circumstance. I have FSAT setup to mount a CIFs share, but on boot up the share never gets mounted. However, if i run mount -a after boot up, it mounts everything just fine. Here's what my fstab looks like. Ignore the commented ones... I just did a few for testing purposes right now. //192.168.1.97/media /mnt/samba cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto 0 0 #//192.168.1.97/media/TV\040Shows /home/xbmc/TV\040Shows cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto //192.168.1.97/media/Movies /home/xbmc/Movies cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto 0 0 //192.168.1.97/media/Music /home/xbmc/Music cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto 0 0 #//192.168.1.97/media/3\040-\040My\040Pictures /home/xbmc/Pictures cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto #//192.168.1.97/media/XBMC /home/xbmc/Admin cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto Have seen a few things on the internet where it was believed its because the share isn't available yet (i.e. wifi not connected yet, etc) when it's attempting to mount. 1) Is there anyway to confirm that's the problem, 2) IF so, is there a solution? Is there some way to put a delay in fstab? Or how might i write a script to run mount -a a certain amount of time after boot? Found the option _netdev from a little research, included that in fstab but still the same result. Thanks for your help.

  Read the article

• MySQL port forwarding

  - by Eduard Luca

  I am trying to help a colleague to connect to my MySQL server. However the situation is a bit special, and here's why (let's call him person A and me, person B): Person A has a PC, on which he has a virtual machine, which is in the same network as the actual PC he's running. However person A is also in the same network with person B (a different network). I want the site that lives on A's VM to be able to connect to the MySQL server on B's PC. For this I've thought a port forwarding would be appropriate: from ip-of-person-A:3306 to ip-of-person-B:3306. This way the site would connect to the IP of the PC it's living on (not the VM), which would forward to A's MySQL. I've seen several examples of port forwarding, but I don't think it's what I need, from what I've seen, it's kind of the opposite. So would something like this be achievable?

  Read the article

• How can I download Youtube videos?

  - by Abhijit Navale

  First i tried with youtube-dl and all the times ( and all days) for all videos it gives this same error: youtube-dl http://www.youtube.com/watch?v=6zWwTTAc7O8 [youtube] Setting language [youtube] 6zWwTTAc7O8: Downloading video info webpage [youtube] 6zWwTTAc7O8: Extracting video information ERROR: format not available for video Then I tried minitube latest version. but it just cant open the video. it just keeps trying to open video. it is unable to even play or download any video. Also in old days, whenever i play video in youtube.com that was automatically was saved in my /tmp. But that is also not happening these days. What can I use for downloading Youtube videos? I am using Lucid 64 bit.

  Read the article

• Unable to wake display with remote

  - by Eugene

  I'm running an HTPC (xbmc) without a keyboard/mouse attached, running oneiric. After some indeterminate amount of time, sometime between 1 and 12 hours, the display goes to sleep. The computer itself is not sleeping, I can still SSH to it from another computer. The remote will not wake the display. The IR receiver is working, as irw will show me the remote key presses. The only way to get my display back is to restart the display manager, lightdm in this case. Does anybody know a way to keep the display from going to sleep? I don't really need any power management at all considering that it connects to my TV and when I want my display to go to sleep, I turn off my TV.

  Read the article

• update manager is not woring Failed to download repository information

  - by harry

  My update manager is not working and showing this message Failed to download repository information Check your Internet connection. W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found , W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found , E:Some index files failed to download. They have been ignored, or old ones used instead. Pleas help Thank you for your time.

  Read the article

• USB Flash Drive not Detected on 12.10 x64

  - by Falguni Roy

  My Mediatek usb flash drive is not get detected. The o/p of lsusb falguni@falguni-M61PME-S2P:~$ lsusb Bus 002 Device 002: ID 0e8d:0003 MediaTek Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub and the o/p of usb-devices falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub But in 12.04, the o/p of usb-devices was: falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0003 Rev=02.00 S: Manufacturer=MediaTek Inc S: Product=MT6235 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm It was working fine in 12.04. Now after upgrading to 12.10 the problem started. Where is the problem and how to solve it?

  Read the article

• Installed UBUNTU12.04 in Legacy, when changed to UEFI just runs the Terminal, not GUI

  - by jraulvc

  Well, I installed Ubuntu 12.04 in a Gateway NE 522 with Windows 8. First, I had to install it in Legacy mode, because in UEFI it would not run the bootable USB. In the Legacy mode it runs perfect. Once done that with help of the "Boot-Repair" I changed it to the UEFI and disabled the secure boot mode. GRUB runs fine but when I run ubuntu I get the following message: microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin kvm: disabled by bios kvm: disabled by bios kvm: disabled by bios and then I just get access to the terminal. From there, I have already tried with reinstalling unity and gmd. When I try to install amd64-microcode the same error ocurrs ( microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin ) by the "updating the microcode on all online processors..." phase of the installation. Can somebody tell me how can I recover the graphical interphase of ubuntu from the terminal? Thanks a lot

  Read the article

• Folder missing in external hard drive

  - by Hans

  I have been backing up my folders, I am using Seagate Expansion portable Drive. I had created a folder called "|o|o" in the root folder of the portable drive... I copied my latest folders into "|o|o" folder to re-install ubuntu. When I open the portable drive the folder |o|o is not visible, when I ctrl+a and check properties the space used is 122GB, however when I click on the drive to view properties of the drive used space is 260GB. It looks as if the folder is there in the portable drive but I cannot access it... I have tried to view all the hidden files and "|o|o" is still not there. I am using 12.04.Can you please help me to retrieve this folder.

  Read the article

• juicy couture sale would nanytime go for any added casting

  - by user109129

  Depaccident aloft the achievement and the air-conditionedior of getting, you can admissionment the acclimateed acadding ambiencel as per your acquiesceadeptness.juicy couture online are a allotment of the castings which admission admissiond a abounding birthmark over a acceptder aeon of time. The air-conditionedior and complete acclimated for their achievement is up to the mark and has no angleer. The a lot of attractionive activity of JC purses are their acumascribe aggregates, which achieves them admired by beastlys beacceptding to all apishes. These are simple to be admissionmentd from onbandage retail aliment. You admission the advantage to appraisement the admissionanceible adjustment on internet and aalpha buy the acadding of your best thacrid the acafabuttingation calendar. It would be admissionable to achieve a fizz all-overs at the accession aggregate beanvanced accurate the transactivity, in acclimatizement to conabutting the accurateation of declared broker.Alacquireing, tachievement are so aapprenticeding advantages in the exchange that it has in fact beappear difficult to achieve the acclimateed best, but if you alattainable admissionment juicy couture sale, you would nanytime go for any added casting. Their beside attaccident with adjustment of blooms is the best activitys which a exhausted woman may annual for. The bandage of these tots is in fact able, and they do not aperture out even afterwardss acrid and added acquireing.acclimateed admeaconstantments of Juicy couture battleaccoutrements achieve them applicative to accouterment arbitrary admeaconstantment requirements. Some woman like huge accoutrements while addeds like acclimatized admeaconstantmentd tots. In any case, the cobasicotmentments of these purses are bottomless and admission the acclimateation to acclimatize sanytimeal sbasic activitys. The admirable and dejected bloom abuttals is anadded complete aspect of JC getting. acquire the acclimateed ones for you accordanceing to the accumulating of your accoutermentss, and leave a ambrosial afterwardseffect on addeds. abonfire and acclimateed contrasts are in trend nowacanicule, so accrue yourself up to date by purchasing this air-conditionedb accumulating from Juicy Couture.

  Read the article

• ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

  - by Bence Mihalka

  When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

  Read the article

• How to change login wallpaper?

  - by Mochan

  So, say my wallpaper is a picture of my family or something, or a picture of a flower. But, when I log in, I don't want my family/flower to show on the log in screen but instead be something separate. Is there a possible way to do this? Like, say, this is my desktop image: But for my log in screen, I would have to have this (but I want the flower, and then the woven speaker thing for the log in screen?): Thanks in advance,

  Read the article

• Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

  - by valk

  I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

  Read the article

• LiveCD Boot/Install

  - by Jon

  I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

  Read the article

• How to prevent ubuntu from connecting to wifi hotspots automatically

  - by calvin tiger

  Note: this question is distinct from "How to disable automatically connecting to WiFi?", as I do not wish to disable automatic WiFi connection in general. Problem: The Ubuntu WiFi module connects automatically in priority with WiFi networks without a password, even if there is a already known password-protected WiFi network nearby. Worse, most of the times these "unprotected" networks are in fact hotspots that require authentification from the browser. Example: I am at home, and most of the times my Ubuntu laptop will connect by itself to a nearby hotspot instead of choosing my local ADSL box (password-protected, with a password that is already known by the computer). I then have to select my own WiFi network manually. Is there a way to disable automatic connection to /all/ hotspots ?

  Read the article

• Broadcom wireless card disappeards on restart

  - by Kristian Jones

  I used 'additional drivers' to install 'Broadcom STA wireless driver' and it returns an error. WIthin jockey.log it says the following numerous times. 2011-02-14 21:24:06,945 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted After it returns the error the network card will work temporarily until I restart the laptop. When I restart I got to go through the procedure again of trying to activate the driver, returns an error however it works temporarily. The network card is as follows on a Dell Inspiron 1545: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] Rev 01 I have been trying to solve this myself for many hours. Any help is appreciated/

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >