Search Results

Search found 29567 results on 1183 pages for 'network tools'.

Page 310/1183 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• Issues printing through ssh tunnel and port forwarding

  - by simogasp

  I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

  Read the article

• Visual Studio Little Wonders: Quick Launch / Quick Access

  - by James Michael Hare

  Once again, in this series of posts I look at features of Visual Studio that may seem trivial, but can help improve your efficiency as a developer. The index of all my past little wonders posts can be found here. Well, my friends, this post will be a bit short because I’m in the middle of a bit of a move at the moment.  But, that said, I didn’t want to let the blog go completely silent this week, so I decided to add another Little Wonder to the list for the Visual Studio IDE. How often have you wanted to change an option or execute a command in Visual Studio, but can’t remember where the darn thing is in the menu, settings, etc.?  If so, Quick Launch in VS2012 (or Quick Access in VS2010 with the Productivity Power Tools extension) is just for you! Quick Launch / Quick Access – find a command or option quickly For those of you using Visual Studio 2012, Quick Launch is built right into the IDE at the top of the title bar, near the minimize, maximize, and close buttons: But do not despair if you are using Visual Studio 2010, you can get Quick Access from the Productivity Power Tools extension.  To do this, you can go to the extension manager: And then go to the gallery and search for Productivity Power Tools and install it.  If you don’t have VS2012 yet, then the Productivity Power Tools is the next best thing.  This extension updates VS2010 with features such as Quick Access, the Solution Navigator, searchable Add Reference Dialog, better tab wells, etc.  I highly recommend it! But back to the topic at hand!  In VS2012 Quick Launch is built into the IDE and can be accessed by clicking in the Quick Launch area of the title bar, or by pressing CTRL+Q.  If you have VS2010 with the PPT installed, though, it is called Quick Access and is accessible through View –> Quick Access: Regardless of which IDE you are using, the feature behaves mostly the same.  It allows you to search all of Visual Studio’s commands and options for a particular topic.  For example, let’s say you want to change from tabs to tabs expanded to spaces, but don’t remember where that option is buried.  You can bring up Quick Launch / Quick Access and type in “tabs”: And it brings up a list of all options on tabs, you can then choose the one appropriate to you and click on it and it will take you right there! A lot easier than diving through the options tree to find what you are looking for!  It also works on menu commands, for example if you can’t remember how to open the Output window: It shows you the menu items that will get you to the Output window, and (if applicable) the keyboard shortcuts.  Again, clicking on one of these will perform the action for you as well. There are also some tasks you can perform directly from Quick Launch / Quick Access.  For example, perhaps you are one of those people who like to have the line numbers in your editor (I do), so let’s bring up Quick Launch / Quick Access and type “line numbers”: And let’s select Turn Line Numbers On, and now our editor looks like: And Voila!  We have line numbers in VS2010.  You can do this in VS2012 too, but it takes you to the option settings instead of directly turning them off and on.  There are bound to be differences between the way the two editors organize settings and commands, but you get the point. So, as you can see, the Quick Launch / Quick Access feature in Visual Studio makes it easy to jump right to the options, commands, or tasks you are interested in without all the digging. Summary An IDE as powerful as Visual Studio has so many options and commands that it can be confusing to remember how to find and invoke them.  Quick Launch (Quick Access in VS2010 with Productivity Power Tools extension) is a quick and handy way to jump to any of these options, commands, or tasks quickly without having to remember in what menu or screen they are buried!  Technorati Tags: C#,CSharp,.NET,Little Wonders,Visual Studio,Quick Access,Quick Launch

  Read the article

• Visual Studio 2012 and .NET 4.5 now Live!

  - by Tarun Arora

  Today was the formal launch event for Visual Studio 2012 and .NET 4.5, a state-of-the-art development solution for building modern applications that span connected devices and continuous services, from the client to the cloud. The event was streamed live from http://visualstudiolaunch.com, S.Somasegar corporate vice president of the Developer Division opened the key note, Jason Zander dived deeper into how to leverage Visual Studio 2012 and .NET 4.5 to build modern application. Brian Harry all the awesome features in Visual Studio 2012 to improve the application lifecycle management.   I. Summary of the announcements made today 1. Visual Studio Updates coming this fall –  VS Update will better support agile teams, enable continuous quality, elevate SharePoint development with application lifecycle management (ALM) tools, and expand Visual Studio 2012 Windows development capabilities. It will be available as a community technology preview (CTP) later this month and in final release later this calendar year. A comprehensive list of what will be on offer can be found here. 2. Visual Studio Express 2012 for Windows Desktop – Visual Studio Express 2012 for Windows Desktop brings the newest desktop development capabilities in Visual Studio 2012 to Express users, too. You would be excited to know that the express SKU will support Integration with TFS among some of the other cool features I would like to mention Unit Testing, Unit Testing, Code Analysis, dependency management with NuGet a full list and download links can be found here. 3. F# tools for Visual Studio Express 2012 for web –  This F# Tools release adds in F# 3.0 components, such as the F# 3.0 compiler, F# Interactive, IDE support, and new F# features such as type providers and query expressions to your Visual Studio 2012 express for web. More details and download links can be found here. 4. Visual Studio TFS 2012 Power Tools – The TFS 2012 Power tools brings the goodness of Best Practice Analyzer, Process Template Editor, Storyboard Shapes, Team Explorer enhancements, TFPT command line, TFS Server Backups, etc via to your TFS 2012 installation. It can be downloaded right away from here. II. Road shows There will be many more community road shows this month packaged with hours of demos and discussions. The Visual Studio UK Team has just announced that there will be four UK launch events, face to face session including a product group speaker and partner sessions: Edinburgh, 1st October Manchester, 3rd October London, 4th October Reading, 5th October III. Get Started Download Visual Studio 2012 and the additional supporting software's from here. The Visual Studio development team has put together over 60 videos to help you learn about the new Visual Studio 2012 capabilities in more detail, and all of these will be available for watching here. IV. What’s Next A lot more exciting stuff lined up… Windows 8 Anticipated release: Oct. 26 (UPDATED 9/12) Windows Server 2012 Released (UPDATED 9/4) System Center 2012 Released (UPDATED 9/11) SQL Server 2012 Released (UPDATED 4/2) Internet Explorer 10 Anticipated release: Between Q3 2012 and early 2013 (UPDATED 5/3   Office 2013 Anticipated release: Q4 2012 or Q1 2013(UPDATED 9/12) Exchange 2013 Anticipated release: Q4 2012 (UPDATED 7/26) Visual Studio 2012 Released (UPDATED 9/12) Kinect for Windows Released (UPDATED 9/4) Windows Phone "Tango" and 8 "Tango": Released; Anticipated "Windows Phone 8" release: Q4 2012 (UPDATED 9/5) Dynamics ERP Online Anticipated release: September or October 2012 (UPDATED 7/20) Office 365 Anticipated update schedule: "Almost weekly"(UPDATED 9/12) Windows Azure Rumored CTP release: Spring 2012 (UPDATED 9/7) SharePoint 2013 Anticipated release: Q4 2012 (UPDATED 8/21) Enjoy

  Read the article

• Desktop Applications Versus Web Applications

  Up until the advent of the internet programmers really only developed one type of application used by end-users.  This type of application was called a desktop application. As the name implies, these applications ran strictly from a desktop computer, and were limited by the resources available to the computer. Initially, this type of applications did not need resources outside of the scope of the computer in which they installed. The problem with this type of application is that if multiple end-users need to access the same desktop application, then the application must be installed on the end-user’s computer. In this age of software development security was not as big of a concern as it is today with other types of applications. This is primarily due to the fact that an end-user must have access to the computer where the software is installed in order for them to access the application. In addition, developers could also password protect the application just in case an authorized end-user was able to gain access to the computer. With the birth of the internet a second form of application emerged because developers were trying to solve inherent issues with the preexisting desktop application. One of the solutions to overcome some of the short comings of desktop applications is the web application. Web applications are hosted on a centralized server and clients only need to have network access and a web browser in order to access the application. Because a web application can be installed on a remote server it removes the need for individual installations of the same application on each end-user’s computer.  The main benefits to an application being hosted on a server is increased accessibility to the application due to the fact that nothing has to be installed on a desktop computer for an end-user to be able to access the application. In addition, web applications are much easier to maintain because any change to the application is applied on the server and is inherently applied to any end-user trying to use the application. This removes the time needed to install and maintain individual installations of a desktop application. However with the increased accessibility there are additional costs that are incurred compared to a desktop application because of the additional cost and maintenance of a server hosting the application. Typically, after a desktop application is purchased there are no additional reoccurring fees associated with the application.  When developing a web based application there are additional considerations that must be addressed compared to a desktop application. The added benefit of increased accessibility also now adds a new failure point when trying to gain access to an application. An end-user now must have network connectivity in order to access the application. This issue is not a concern for desktop applications because there resources are typically bound to the computer in which they run. Since the availability of an application is increased with the use of the client-server model in a web based application, additional security concerns now come in to play. As stated before a, desktop application is bound to the accessibility of the end-user to the computer that the application is installed. This is not the case with web based applications because they potentially could have access from anywhere with the proper internet/network connection. Additional security steps are required to insure the integrity of the application and its data. Examples of these steps include and are not limited to the following: Restricted/Password Areas This form of security is used when specific information can only be accessed by end-users based on a set of accessibility rules. IP Restrictions This form of security is used when only specific locations need to access an application. This form of security is applied from within the web server or a firewall. Network Restrictions (Firewalls) This form of security is used to contain access to an application within a specific sub set of a network. Data Encryption This form of security is used transform personally identifiable information in to something unreadable so that it can be stored for future use. Encrypted Protocols (HTTPS) This form of security is used to prevent others from reading messages being sent between applications over a network.

  Read the article

• Upgrade issues due to broken "dependency problems prevent configuration of linux-image-generic" error

  - by tsukune1791

  okay, I've recently upgrade from 11.10 to 12.04 and I've been having some issues. I don't know if its a bug or not, but I thought I would submit it here. Okay here's a little background; I ran the distro update from the update manager and got a couple errors that I didn't catch. the computer restarted, and when I logged the Launcher and my top bar of the Ubuntu desktop didn't load. While it was trying to load a couple error messages came up, I think they were called "apport", saying they couldn't send the bug information for some reason. I believe it said somethings wrong with my internet connection, but nothing's wrong with it. Anyway I tried running some things in terminal, namely sudo apt-get -f install sudo apt-get upgrade sudo apt-get dist-upgrade and keep getting the following errors; dustin@marceau-laptop:~$ sudo apt-get dist-upgrade [sudo] password for dustin: Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 4 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up initramfs-tools (0.99ubuntu13) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-24-generic (3.2.0-24.37) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/zz-runlilo 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-24-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-24-generic; however: Package linux-image-3.2.0-24-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.24.26); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/initramfs/post-update.d//runlilo exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic linux-image-generic linux-generic initramfs-tools localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB localepurge: Disk space freed in /usr/share/doc/kde/HTML: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) And my Ubuntu desktop is still not working. I can log into Gnome and Ubuntu 2D but the Launcher, I think it's call, doesn't load. Can someone help me fix these error, or point me in the right direction to get them fixed? It is much appriciated.

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• Replicating between Cloud and On-Premises using Oracle GoldenGate

  - by Ananth R. Tiru

  Do you have applications running on the cloud that you need to connect with the on premises systems. The most likely answer to this question is an astounding YES!  If so, then you understand the importance of keep the data fresh at all times across the cloud and on-premises environments. This is also one of the key focus areas for the new GoldenGate 12c release which we announced couple of week ago via a press release. Most enterprises have spent years avoiding the data “silos” that inhibit productivity. For example, an enterprise which has adopted a CRM strategy could be relying on an on-premises based marketing application used for developing and nurturing leads. At the same time it could be using a SaaS based Sales application to create opportunities and quotes. The sales and the marketing teams which use these systems need to be able to access and share the data in a reliable and cohesive way. This example can be extended to other applications areas such as HR, Supply Chain, and Finance and the demands the users place on getting a consistent view of the data. When it comes to moving data in hybrid environments some of the key requirements include minimal latency, reliability and security: Data must remain fresh. As data ages it becomes less relevant and less valuable—day-old data is often insufficient in today’s competitive landscape. Reliability must be guaranteed despite system or connectivity issues that can occur between the cloud and on-premises instances. Security is a key concern when replicating between cloud and on-premises instances. There are several options to consider when replicating between the cloud and on-premises instances. Option 1 – Secured network established between the cloud and on-premises A secured network is established between the cloud and on-premises which enables the applications (including replication software) running on the cloud and on-premises to have seamless connectivity to other applications irrespective of where they are physically located. Option 2 – Restricted network established between the cloud and on-premises A restricted network is established between the cloud and on-premises instances which enable certain ports (required by replication) be opened on both the cloud and on the on-premises instances and white lists the IP addresses of the cloud and on-premises instances. Option 3 – Restricted network access from on-premises and cloud through HTTP proxy This option can be considered when the ports required by the applications (including replication software) are not open and the cloud instance is not white listed on the on-premises instance. This option of tunneling through HTTP proxy may be only considered when proper security exceptions are obtained. Oracle GoldenGate Oracle GoldenGate is used for major Fortune 500 companies and other industry leaders worldwide to support mission-critical systems for data availability and integration. Oracle GoldenGate addresses the requirements for ensuring data consistency between cloud and on-premises instances, thus facilitating the business process to run effectively and reliably. The architecture diagram below illustrates the scenario where the cloud and the on-premises instance are connected using GoldenGate through a secured network In the above scenario, Oracle GoldenGate is installed and configured on both the cloud and the on-premises instances. On the cloud instance Oracle GoldenGate is installed and configured on the machine where the database instance can be accessed. Oracle GoldenGate can be configured for unidirectional or bi-directional replication between the cloud and on premises instances. The specific configuration details of Oracle GoldenGate processes will depend upon the option selected for establishing connectivity between the cloud and on-premises instances. The knowledge article (ID - 1588484.1) titled ' Replicating between Cloud and On-Premises using Oracle GoldenGate' discusses in detail the options for replicating between the cloud and on-premises instances. The article can be found on My Oracle Support. To learn more about Oracle GoldenGate 12c register for our launch webcast where we will go into these new features in more detail.   You may also want to download our white paper "Oracle GoldenGate 12c Release 1 New Features Overview" I would love to hear your requirements for replicating between on-premises and cloud instances, as well as your comments about the strategy discussed in the knowledge article to address your needs. Please post your comments in this blog or in the Oracle GoldenGate public forum - https://forums.oracle.com/community/developer/english/business_intelligence/system_management_and_integration/goldengate

  Read the article

• Know your Data Lineage

  - by Simon Elliston Ball

  An academic paper without the footnotes isn’t an academic paper. Journalists wouldn’t base a news article on facts that they can’t verify. So why would anyone publish reports without being able to say where the data has come from and be confident of its quality, in other words, without knowing its lineage. (sometimes referred to as ‘provenance’ or ‘pedigree’) The number and variety of data sources, both traditional and new, increases inexorably. Data comes clean or dirty, processed or raw, unimpeachable or entirely fabricated. On its journey to our report, from its source, the data can travel through a network of interconnected pipes, passing through numerous distinct systems, each managed by different people. At each point along the pipeline, it can be changed, filtered, aggregated and combined. When the data finally emerges, how can we be sure that it is right? How can we be certain that no part of the data collection was based on incorrect assumptions, that key data points haven’t been left out, or that the sources are good? Even when we’re using data science to give us an approximate or probable answer, we cannot have any confidence in the results without confidence in the data from which it came. You need to know what has been done to your data, where it came from, and who is responsible for each stage of the analysis. This information represents your data lineage; it is your stack-trace. If you’re an analyst, suspicious of a number, it tells you why the number is there and how it got there. If you’re a developer, working on a pipeline, it provides the context you need to track down the bug. If you’re a manager, or an auditor, it lets you know the right things are being done. Lineage tracking is part of good data governance. Most audit and lineage systems require you to buy into their whole structure. If you are using Hadoop for your data storage and processing, then tools like Falcon allow you to track lineage, as long as you are using Falcon to write and run the pipeline. It can mean learning a new way of running your jobs (or using some sort of proxy), and even a distinct way of writing your queries. Other Hadoop tools provide a lot of operational and audit information, spread throughout the many logs produced by Hive, Sqoop, MapReduce and all the various moving parts that make up the eco-system. To get a full picture of what’s going on in your Hadoop system you need to capture both Falcon lineage and the data-exhaust of other tools that Falcon can’t orchestrate. However, the problem is bigger even that that. Often, Hadoop is just one piece in a larger processing workflow. The next step of the challenge is how you bind together the lineage metadata describing what happened before and after Hadoop, where ‘after’ could be  a data analysis environment like R, an application, or even directly into an end-user tool such as Tableau or Excel. One possibility is to push as much as you can of your key analytics into Hadoop, but would you give up the power, and familiarity of your existing tools in return for a reliable way of tracking lineage? Lineage and auditing should work consistently, automatically and quietly, allowing users to access their data with any tool they require to use. The real solution, therefore, is to create a consistent method by which to bring lineage data from these data various disparate sources into the data analysis platform that you use, rather than being forced to use the tool that manages the pipeline for the lineage and a different tool for the data analysis. The key is to keep your logs, keep your audit data, from every source, bring them together and use the data analysis tools to trace the paths from raw data to the answer that data analysis provides.

  Read the article

• How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

  - by Ivan Kreimer

  I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

  Read the article

• My collection of favourite TFS utilities

  - by Aaron Kowall

  So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

  Read the article

• Moving from Silverlight 4 Beta to RC - Part 1

  The other day I had finished up my Task-It Webinar, written a few blog posts, and knew the time had come to move from my Silverlight 4 Beta environment up to the latest RC (release candidate) bits that were released last Monday. What disappointed me when I went to the Silverlight 4 Information Page is that it told me what to install, but not what to uninstall first. Uninstalling I'm not entirely sure if I had to uninstall anything, or if installing the new stuff would just work, but in poking around the web I found posts stating that you must uninstall the following items first. Unfortunately I'm going by memory here and have not been able to find my way back to the magic page I found in the myriad of posts that I went through: Microsoft VisualStudio Beta 2 Microsoft .NET Framework 4 Extended (apparently this must be done *before* the next one) Microsoft .NET Framework Client Profile Microsoft Silverlight 4 Tools for Visual Studio 2010 WCF RIA Services Preview for Visual Studio 2010 While I was at it, I removed a bunch of other stuff, like Blend 3, Blend 4, the SDK's associated with them, and a bunch other stuff that was old. Of course, I didn't really want/need to keep any Silverlight 3 stuff around as I am developing Task-It in Silverlight 4. If I need a Silverlight 3 environment at some point I'll set it up in a virtual environment. NOTE: One thing that I did not uninstall is the Microsoft Silverlight 4 Toolkit November 2009. The reason is that they have not released the March version yet, so if you uninstall this, youll end up having to reinstall it. Installing OK, now that I had all of that old stuff off my machine, now it was time to get the new stuff. For this part I liked Tim Heuer's post, A Guide to What has Changed in Silverlight 4 RC better than the Silverlight 4 Information Page. VisualStudio 2010 RC - I installed Ultimate, but you may not need that version. No harm, it's free for now anyway. I downloaded the .exe and the 3 .rar files, then ran the .exe. I then extracted the contents of the ISO (using WinZip) to a new directory, and now had Setup.exe, a bunch of .cab files and some other assorted stuff. I simply ran Setup.exe and chose custom install (only because I wanted to uncheck Visual C++...I don't really have a need for that) Silverlight 4 Tools for Visual Studio 2010 - As mentioned in Tim's blog post, this installs this installs Silverlight developer runtime, SDK, tools, and this installs Silverlight developer runtime, SDK, tools, and WCF RIA Services. WCF RIA Services Toolkit March 2010 - I'm not sure if/when I'll need any of this stuff, but no harm in installing it anyway. Expression Blend 4 beta - Only if you plan to use Blend, which I do. Windows Phone Developer Tools - Only if you are interested in playing with Windows Phone 7 development. Wrap Up Hopefully I got those steps right. If anyone finds anything I've missed, please just add a comment to this post and I'll update it accordingly.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• Using WKA in Large Coherence Clusters (Disabling Multicast)

  - by jpurdy

  Disabling hardware multicast (by configuring well-known addresses aka WKA) will place significant stress on the network. For messages that must be sent to multiple servers, rather than having a server send a single packet to the switch and having the switch broadcast that packet to the rest of the cluster, the server must send a packet to each of the other servers. While hardware varies significantly, consider that a server with a single gigabit connection can send at most ~70,000 packets per second. To continue with some concrete numbers, in a cluster with 500 members, that means that each server can send at most 140 cluster-wide messages per second. And if there are 10 cluster members on each physical machine, that number shrinks to 14 cluster-wide messages per second (or with only mild hyperbole, roughly zero). It is also important to keep in mind that network I/O is not only expensive in terms of the network itself, but also the consumption of CPU required to send (or receive) a message (due to things like copying the packet bytes, processing a interrupt, etc). Fortunately, Coherence is designed to rely primarily on point-to-point messages, but there are some features that are inherently one-to-many: Announcing the arrival or departure of a member Updating partition assignment maps across the cluster Creating or destroying a NamedCache Invalidating a cache entry from a large number of client-side near caches Distributing a filter-based request across the full set of cache servers (e.g. queries, aggregators and entry processors) Invoking clear() on a NamedCache The first few of these are operations that are primarily routed through a single senior member, and also occur infrequently, so they usually are not a primary consideration. There are cases, however, where the load from introducing new members can be substantial (to the point of destabilizing the cluster). Consider the case where cluster in the first paragraph grows from 500 members to 1000 members (holding the number of physical machines constant). During this period, there will be 500 new member introductions, each of which may consist of several cluster-wide operations (for the cluster membership itself as well as the partitioned cache services, replicated cache services, invocation services, management services, etc). Note that all of these introductions will route through that one senior member, which is sharing its network bandwidth with several other members (which will be communicating to a lesser degree with other members throughout this process). While each service may have a distinct senior member, there's a good chance during initial startup that a single member will be the senior for all services (if those services start on the senior before the second member joins the cluster). It's obvious that this could cause CPU and/or network starvation. In the current release of Coherence (3.7.1.3 as of this writing), the pure unicast code path also has less sophisticated flow-control for cluster-wide messages (compared to the multicast-enabled code path), which may also result in significant heap consumption on the senior member's JVM (from the message backlog). This is almost never a problem in practice, but with sufficient CPU or network starvation, it could become critical. For the non-operational concerns (near caches, queries, etc), the application itself will determine how much load is placed on the cluster. Applications intended for deployment in a pure unicast environment should be careful to avoid excessive dependence on these features. Even in an environment with multicast support, these operations may scale poorly since even with a constant request rate, the underlying workload will increase at roughly the same rate as the underlying resources are added. Unless there is an infrastructural requirement to the contrary, multicast should be enabled. If it can't be enabled, care should be taken to ensure the added overhead doesn't lead to performance or stability issues. This is particularly crucial in large clusters.

  Read the article

• "The connection has timed out" - Please help!

  - by gon

  I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

  Read the article

• Adobe AIR App install Error #2032

  - by fmz

  I created an Adobe AIR application using html, css and Javascript. The application works fine, but now that I have built the installer I get the following error: Sorry, an error has occurred. The application could not be installed. Try installing it again. If the problem persists, contact the application author. Error# 2032 I am the application author... The link to the installer: http://www.bendelcorp.com/tools/default%5Fbadge.html The Flash Vars code: 'flashvars','appname=Bendel-Tools&appurl=http://www.bendelcorp.com/tools/Bendel-Tools.air&airversion=1.5&imageurl=icon2.png', 'movie','badge' ); I would appreciate any assistance for resolving this. Thanks.

  Read the article

• MSBuild cannot find SGen when compiling a solution

  - by Jaxidian

  I've looked at several other SGen-related questions on here and either their answers don't apply or their answers don't fix this for me. I have installed several SDKs to fix this issue with no luck. Reference types should not be changed since this is the only place this is a problem. Once suggestion is to put SGen.exe into the C:\Windows\Microsoft.NET\Framework\v3.5 folder, but that's not been done on the box where this is not a problem. In this scenario, SGen.exe actually exists and is right where it's supposed to be, but MSBuild still is having issues with finding it for some reason! Background: We have a NAnt script that automates our builds. In this scenario, NAnt is calling MSBuild and MSBuild is generating the error claiming to be unable to find SGen. The project is .NET 3.5-based. I have my primary dev environment (64-bit Vista Ultimate) where the script works perfectly and I am attempting to duplicate it in a VM (64-bit Win 7 Ultimate). I THINK I have everything to the point where I should be good-to-go but this fails on the Win7 box (works perfectly on the Vista box). I have done some comparisons between the two boxes and they both look identical in this regard, but it still fails. For example, the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework's sdkInstallRootv2.0 value is set to C:\Program Files\Microsoft.NET\SDK\v2.0 64bit\ on both machines. In both machines, SGen.exe is in that path's bin subdirectory. NAnt Script: <target name="report-installer" depends="fail-if-environment-not-set"> <exec program="MSBuild.exe" basedir="${framework35.directory}"> <arg value="${tools.directory.current}\ReportInstaller\ReportInstaller.sln" /> <arg value="/p:Configuration=${buildconfiguration.current}" /> </exec> </target> The error message I get is this: report-installer: [exec] Microsoft (R) Build Engine Version 3.5.30729.4926 [exec] [Microsoft .NET Framework, Version 2.0.50727.4927] [exec] Copyright (C) Microsoft Corporation 2007. All rights reserved. [exec] [exec] Build started 4/8/2010 11:28:23 AM. [exec] Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" on node 0 (default targets). [exec] Building solution configuration "Release|Any CPU". [exec] Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" (1) is building "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.csproj" (2) on node 0 (default targets). [exec] Could not locate the .NET Framework SDK. The task is looking for the path to the .NET Framework SDK at the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK. 2.) Manually set the above registry key to the correct location. [exec] CoreCompile: [exec] Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. [exec] C:\Windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets(1902,9): error MSB3091: Task failed because "sgen.exe" was not found, or the .NET Framework SDK v2.0 is not installed. The task is looking for "sgen.exe" in the "bin" subdirectory beneath the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK v2.0. 2.) Manually set the above registry key to the correct location. 3.) Pass the correct location into the "ToolPath" parameter of the task. [exec] Done Building Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.csproj" (default targets) -- FAILED. [exec] Done Building Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" (default targets) -- FAILED. [exec] [exec] Build FAILED. [exec] [exec] "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" (default target) (1) -> [exec] "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.csproj" (default target) (2) -> [exec] (GenerateSerializationAssemblies target) -> [exec] C:\Windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets(1902,9): error MSB3091: Task failed because "sgen.exe" was not found, or the .NET Framework SDK v2.0 is not installed. The task is looking for "sgen.exe" in the "bin" subdirectory beneath the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK v2.0. 2.) Manually set the above registry key to the correct location. 3.) Pass the correct location into the "ToolPath" parameter of the task. [exec] [exec] 0 Warning(s) [exec] 1 Error(s) [exec] [exec] Time Elapsed 00:00:00.24 [call] C:\Projects\Production\Source\reports.build(15,4): [call] External Program Failed: C:\Windows\Microsoft.NET\Framework\v3.5\MSBuild.exe (return code was 1) What am I doing wrong here that is causing MSBuild to STILL be unable to find SGen?

  Read the article

• Connection Error:Oracle.DataAccess.Client.OracleException ORA-12170

  - by psyb0rg

  This has taken many hours of mine. I have to get this .Net app to run on an XP system. Someone seems to have messed up some files so conn.Open() in the C# is causing this error: Connection Error:Oracle.DataAccess.Client.OracleException ORA-12170: TNS:Connect timeout occurred at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure) at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) at Oracle.DataAccess.Client.OracleConnection.Open() at Service.connect(Int32 sql_choice, String databaseIdentifier, String authenticationKey) in c:\Documents .... This is my sqlnet.ora file: # sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) SQLNET.INBOUND_CONNECT_TIMEOUT = 180 SQLNET.SEND_TIMEOUT = 180 SQLNET.RECV_TIMEOUT = 180 This is tnsnames.ora: # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORACLE2 = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dell )(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = oracle2) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dell )(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) EXTPROC_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) ) (CONNECT_DATA = (SID = PLSExtProc) (PRESENTATION = RO) ) ) This is listener.ora: # listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = C:\oracle\product\10.2.0\db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dell )(PORT = 1521)) ) ) I've tried changing the host name to localhost, 127.0.0.1 but none work I can execute queries from SQL Plus. There are NO firewalls on the system The .Net app and DB are on the same machine. Anyone?

  Read the article

• Eclipse: Cannot install CDT because of a conflicting dependency

  - by MarkZar

  my eclipse has been configured for Java and pydev, now i want to configure C/C++ development tools with Eclipse. i dont want to download the whole Eclipse IDE for C/C++ Developers, for it is not convenient. so i decided to install CDT in my Eclipse. Help == Install New Software, then input http://download.eclipse.org/tools/cdt/releases/indigo, waited for a while, and chose the following CDT Main Features, CDT Optional Features, and Next, then an error occurred. Cannot complete the install because of a conflicting dependency. Software being installed: C/C++ DSF GDB Debugger Integration 4.0.0.201106081058 (org.eclipse.cdt.gnu.dsf.feature.group 4.0.0.201106081058) Software being installed: C/C++ Development Tools SDK 8.0.2.201202111925 (org.eclipse.cdt.sdk.feature.group 8.0.2.201202111925) Only one of the following can be installed at once: GDB DSF Debugger Integration Core 4.0.0.201106081058 (org.eclipse.cdt.dsf.gdb 4.0.0.201106081058) GDB DSF Debugger Integration Core 4.0.2.201202111925 (org.eclipse.cdt.dsf.gdb 4.0.2.201202111925) GDB DSF Debugger Integration Core 4.0.1.201109151620 (org.eclipse.cdt.dsf.gdb 4.0.1.201109151620) Cannot satisfy dependency: From: C/C++ Development Tools 8.0.2.201202111925 (org.eclipse.cdt.feature.group 8.0.2.201202111925) To: org.eclipse.cdt.gnu.dsf.feature.group [4.0.1.201202111925] Cannot satisfy dependency: From: C/C++ DSF GDB Debugger Integration 4.0.0.201106081058 (org.eclipse.cdt.gnu.dsf.feature.group 4.0.0.201106081058) To: org.eclipse.cdt.dsf.gdb [4.0.0.201106081058] Cannot satisfy dependency: From: C/C++ DSF GDB Debugger Integration 4.0.1.201202111925 (org.eclipse.cdt.gnu.dsf.feature.group 4.0.1.201202111925) To: org.eclipse.cdt.dsf.gdb [4.0.2.201202111925] Cannot satisfy dependency: From: C/C++ Development Tools SDK 8.0.2.201202111925 (org.eclipse.cdt.sdk.feature.group 8.0.2.201202111925) To: org.eclipse.cdt.feature.group [8.0.2.201202111925] i have googled for a lot of time, but still cannot find a valid solution. can anyone give a hand to me? thanks a lot!

  Read the article

• What is NetFx in the Windows SDK?

  - by emddudley

  What is NetFx, in the context of the Windows SDK? What differentiates NetFx tools from the tools in the regular SDK bin directory? I noticed that the version of sgen.exe in C:\Program Files\Microsoft SDKs\Windows\v7.0A\bin\ was built against .NET 2.0, but the version in C:\Program Files\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 Tools\ was built against .NET 4.0.

  Read the article

• JQueryTools live?

  - by deryck

  I´m using JQuery Tools http://flowplayer.org/tools/ in one big project. The issues is: When I load a page using ajax all this JQuery Tools stuff stop working. I know I have to re-bind the events or use jQuery.Live but I don´t know how to do this with JQuery Tools. I need methods like $(".element").overlay(...) $(".element").tabs(...) workin live after using jQuery.load() (Ajax) Anybody know how to do this please? Thanks.

  Read the article

• BN_hex2bn magicaly segfaults in openSSL

  - by xunil154

  Greetings, this is my first post on stackoverflow, and i'm sorry if its a bit long. I'm trying to build a handshake protocol for my own project and am having issues with the server converting the clients RSA's public key to a Bignum. It works in my clent code, but the server segfaults when attempting to convert the hex value of the clients public RSA to a bignum. I have already checked that there is no garbidge before or after the RSA data, and have looked online, but i'm stuck. header segment: typedef struct KEYS { RSA *serv; char* serv_pub; int pub_size; RSA *clnt; } KEYS; KEYS keys; Initializing function: // Generates and validates the servers key /* code for generating server RSA left out, it's working */ //Set client exponent keys.clnt = 0; keys.clnt = RSA_new(); BN_dec2bn(&keys.clnt->e, RSA_E_S); // RSA_E_S contains the public exponent Problem code (in Network::server_handshake): // *Recieved an encrypted message from the network and decrypt into 'buffer' (1024 byte long)* cout << "Assigning clients RSA" << endl; // I have verified that 'buffer' contains the proper key if (BN_hex2bn(&keys.clnt->n, buffer) < 0) { Error("ERROR reading server RSA"); } cout << "clients RSA has been assigned" << endl; The program segfaults at BN_hex2bn(&keys.clnt->n, buffer) with the error (valgrind output) Invalid read of size 8 at 0x50DBF9F: BN_hex2bn (in /usr/lib/libcrypto.so.0.9.8) by 0x40F23E: Network::server_handshake() (Network.cpp:177) by 0x40EF42: Network::startNet() (Network.cpp:126) by 0x403C38: main (server.cpp:51) Address 0x20 is not stack'd, malloc'd or (recently) free'd Process terminating with default action of signal 11 (SIGSEGV) Access not within mapped region at address 0x20 at 0x50DBF9F: BN_hex2bn (in /usr/lib/libcrypto.so.0.9.8) And I don't know why it is, Im using the exact same code in the client program, and it works just fine. Any input is greatly appriciated!

  Read the article

• Pdssql.dll cannot be found

  - by Kolten

  I am attempting to open a Crystal Reports 8.5 document, and when I try to set the database to the Production data server, i get the error "Pdssql.dll cannot be found". Googling, this is a common problem, but none of the fixes I tried seem to work. This is a new computer. I do have SQL Server 2008 client tools installed, but I believe previously I had Sql Server 2005 client tools. I attempted to install the SQL Server 2005 client tools, but that didn't go through due to me having 2008 installed. I require 2008 to do my job now. Everything I search for says this is a 16bit driver, and I need to install the 2005 client tools. Unfortunately this cannot be done due to me having 2008. is there some sort of work-around I can do? Thanks

  Read the article

• Spawn a multi-threaded Java program from a Windows command line program, spawner won't end until spa

  - by Ross Patterson

  Short version: How can I prevent a spawned Java process in Windows from blocking the spawning process from ending? Long version: I'm trying to spawn a multi-threaded Java program (Selenium RC, not that it should matter) from a program launched from the Windows command line (NAnt's <exec> task, again, not that it should matter). I'm doing it using the Windows "start" command, and the spawned process is started and runs correctly. The spawning process receives control back and finishes (NAnt says "BUILD SUCCEEDED"), but doesn't actually exit to the command line. When the spawned process finally terminates (could be hours later), the command process returns and the command line prompt occurs. For example: <target name="start_rc"> <exec program="cmd" failonerror="false" workingdir="${ross.p5.dir}\Tools\selenium\selenium-server-1.0.1" verbose="true"> <arg value="/C"/> <arg value="start"/> <arg value="java"/> <arg value="-jar"/> <arg path="${ross.p5.dir}\Tools\selenium\selenium-server-1.0.1\selenium-server.jar"/> <arg value="-userExtensions"/> <arg path="${ross.p5.dir}\Tools\selenium\selenium-server-1.0.1\user-extensions.js"/> <arg value="-browserSideLog"/> <arg value="-log"/> <arg value="${ross.p5.dir}\artifacts\selenium.log"/> <arg value="-debug"/> </exec> </target> Produces: C :\Ross>nant start_rc NAnt 0.86 (Build 0.86.2898.0; beta1; 12/8/2007) Copyright (C) 2001-2007 Gerry Shaw http://nant.sourceforge.net Buildfile: file:///C:/Ross/ross.build Target framework: Microsoft .NET Framework 3.5 Target(s) specified: start_rc start_rc: [exec] Starting 'cmd (/C start java -jar C:\p5\Tools\selenium\selenium-server-1.0.1\selenium-server.jar -userExtensions C:\p5\Tools\selenium\selenium-server-1.0.1\user-extensions.js -browserSideLog -log C:\p5\artifacts\selenium.log -debug)' in 'C:\p5\Tools\selenium\selenium-server-1.0.1' BUILD SUCCEEDED Total time: 4.1 seconds. ... and then nothing until I close the window where Java is running, then ... C:\Ross> Obviously something is preventing the nant process from terminating, but shouldn't the Windows START command prevent that?

  Read the article

• Android AVD error after update to 2.3

  - by outcast

  (ubuntu8.0.4+eclipse3.6.1+ADT8.0.1) I update android from(1.5+1.6+2.1+2.2) to 2.3,but I got 1:/home/workaccount/Android/android-sdk-linux_86//tools/emulator: /lib/tls/i686/cmov/libc.so.6: version GLIBC_2.8' not found (required by /home/workaccount/Android/android-sdk-linux_86//tools/emulator) 2:/home/workaccount/Android/android-sdk-linux_86//tools/emulator: /lib/tls/i686/cmov/libc.so.6: versionGLIBC_2.11' not found (required by /home/workaccount/Android/android-sdk-linux_86//tools/emulator) when I start an AVD. All versions can't work now. I delete everything expect eclipse,download adt, AndroidSDK, platform2.3/2.2 ,still error. Heeeelp!!!

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >