Search Results

Search found 19305 results on 773 pages for 'above the gods'.

Page 311/773 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

  • Language Design: Combining Gotos and Functions

    - by sub
    I'm designing and currently rethinking a low-level interpreted programming language with similarities to assembler. I very soon came across the functions/loops/gotos decision problem and thought that while loops like while and for would be too high-level and unfitting, gotos would be too low level, unmaintainable and generally evil again. Functions like you know them from most languages that have return values and arguments aren't fitting in the language's concept either. So I tried to figure out something between a function and a goto which is capable of Recursion Efficient loops After some thinking I came up with the idea of subroutines: They have a beginning and an end like a function They have a name but no arguments like a goto You can go into one with jump and go out of it again before its end with return (doesn't give back any result, only stops the subroutine) Handled just like normal code - Global scope like goto So I wanted to know: Is the idea above good? What are the (dis)advantages? Would there be a better combination of function and goto or even a completely new idea?

    Read the article

  • NSDictionary with key => String and Value => c-Style array

    - by Gautam Borad
    I need an NSDictionary which has key in the form of string (@"key1", @"key2") and value in the form of a C-style two-dimentional array (valueArray1,valueArray2) where valueArray1 is defined as : int valueArray1[8][3] = { {25,10,65},{50,30,75},{60,45,80},{75,60,10}, {10,70,80},{90,30,80},{20,15,90},{20,20,15} }; And same for valueArray2. My aim is given an NSString i need to fetch the corresponding two-dimentional array. I guess using an NSArray, instead of c-style array, will work but then i cannot initialize the arrays as done above (i have many such arrays). If, however, that is doable please let me know how. Currently the following is giving a warning "Passing argument 1 of 'dictionaryWithObjectsAndKeys:' from incompatible pointer type" : NSDictionary *myDict = [NSDictionary dictionaryWithObjectsAndKeys:valueArray1,@"key1", valueArray2,@"key2",nil];

    Read the article

  • Why is SwiftMailer throwing "Internal Server Error"?

    - by Josamoto
    I am using Symfony + SwiftMailer and getting the following error from SwiftMailer: 500 | Internal Server Error | Swift_TransportException Expected response code 220 but got code "", with message "" and can't figure out why. I am using hMailServer on my local machine, and have setup my factories.yml file (as I'm using Symfony) as follows: mailer: class: sfMailer param: logging: %SF_LOGGING_ENABLED% charset: %SF_CHARSET% delivery_strategy: realtime transport: class: Swift_SmtpTransport param: host: splodge.loc port: 25 encryption: ~ username: ~ password: ~ I'm using the following code to send: $message = $this->getMailer()->compose( '[email protected]', '[email protected]', 'Reset Password', 'Message' ); $result = $this->getMailer()->send($message); Has anyone had an issue like this before? I have found that sometimes, and very randomly, the send goes through, but every other time, I get the above error message. So constantly refreshing the page that sends the mail, fails unpredictably, and as the code sometimes works, it's kinda hard to figure out what's wrong. Any help will be highly appreciated!

    Read the article

  • setting jQuery .data() within .getJSON callback

    - by hackmaster.a
    I'm doing a couple of .getJSON calls and if any one of them succeeds, I'm trying to set a bool to true so I can then do some other stuff elsewhere on the page. I was trying to use jquery's .data() function, but I don't seem able to set it from inside the .getJSON callback. for example: $('#citations_button').data('citations', false); $.getJSON(apaurl, function(data) { $('#apacite').html("<td class=\"bibInfoLabel\">APA Citation</td><td class=\"bibInfoData\">"+data+"</td>"); $('#citations_button').data('citations', true); }, "html"); // other .getJSONs look like above... console.log("citations? "+$('#citations_button').data('citations')); prints false, even when I know the data came through. I thought this would work since .data() uses the cache to store the key/value pair. how can i flag successes?? appreciate any assistance!!

    Read the article

  • Graphing new users by date in a Rails app using Seer

    - by Danger Angell
    I'd like to implement a rolling graph showing new users by day over the last 7 days using Seer. I've got Seer installed: http://www.idolhands.com/ruby-on-rails/gems-plugins-and-engines/graphing-for-ruby-on-rails-with-seer I'm struggling to get my brain around how to implement. I've got an array of the Users I want to plot: @users = User.all( :conditions = {:created_at = 7.days.ago..Time.zone.now}) Can't see the right way to implement the :data_method to roll them up by created_at date. Anyone done this or similar with Seer? Anyone smarter than me able to explain this after looking at the Seer sample page (linked above)?

    Read the article

  • WPF: Changing config file user settings at runtime?

    - by Poku
    Hey I'm trying to change some config file user settings values in my WPF application, but its only working partly. The value is changed correctly and the program runs fine with the value. I can even restart the program and the value is still the one i changed it to. The problem is that when i open the .exe.config file the value is still the old value. Im using this code to change the value: Properties.Settings.Default.ProjectNumber = varTestExample; Properties.Settings.Default.Save(); Where does this save code save the changes and how/where does the program read the value after i have run this code? If i run a clean version of the program the ProjectNumber value is correctly taken from the .exe.config file and if i change the value in the config file it is also change when i run the program. But as soon as i run the above code the program is not reading the value from the config file. Why?

    Read the article

  • C#: Insert custom TypeConverter on a property at runtime, from inside a custom UITypeEditor

    - by Pedery
    I've created a custom UITypeEditor. Can I possibly insert an attribute that also attaches a TypeConverter to my property from inside the UITypeEditor class? I've tried the following, but nothing happens, no matter how I twist and turn it: Attribute[] newAttributes = new Attribute[1]; newAttributes[0] = new TypeConverterAttribute(typeof(BooleanConverter)); Now, the above needs to have the following attached to it somehow: TypeDescriptor.AddAttributes(context.Instance.PROPERTYNAME, newAttributes); ...but first of all I don't know how to get to the property in question in a generic way, and all code I try just fails. Even if I try to assign the TypeConverter in this manner globally, it fails. (Setting it as an attribute on the property itself works though, just to rule out that the bug is in that part.)

    Read the article

  • Webkit and Safari fire mousemove even when mouse doesn't move

    - by Roel
    I've read about issues where the mousemove event is fired twice in Safari/Webkit, but the problem I'm facing is that mousemove fires even when the mouse is not moved. That is: it already fires when the mouse cursor is positioned above the context that the event is attached to when the page is loaded/refreshed. And because I'm attaching it to 'document' (entire viewport of the browser), it fires right away in Safari. I've tried to attach it to to html element, to the body and to a wrapper div. No change. $(document).bind('mousemove', function() { alert('Mouse moved!'); $(document).unbind('mousemove'); }); Is does work ok in other browsers. Anyone seeing what I'm doing wrong? Thanks.

    Read the article

  • FullText Search using multiple tables in SQL

    - by Caesar
    Hi there. I have 3 tables, tblBook(BookID, ISBN, Title, Summary) tblAuthor(AuthorID, FullName) tblBookAuthor(BookAuthorID, BookID, AuthorID) tblBookAuthor allows for a single book to have multiple authors and an author may have written any number of books. I am using full text search to search for ranking base on a word: SET @Word = 'FORMSOF(INFLECTIONAL, "' + @Word + '")' SELECT COALESCE(ISBNResults.[KEY], TitleResults.[KEY], SummaryResults.[KEY]) AS [KEY], ISNULL(ISBNResults.Rank, 0) * 3 + ISNULL(TitleResults.Rank, 0) * 2 + ISNULL(SummaryResults.Rank, 0) AS Rank FROM CONTAINSTABLE(tblBook, ISBN, @Word, LANGUAGE 'English') AS ISBNResults FULL OUTER JOIN CONTAINSTABLE(tblBook, Title, @Word, LANGUAGE 'English') AS TitleResults ON ISBNResults.[KEY] = TitleResults.[KEY] FULL OUTER JOIN CONTAINSTABLE(tblBook, Summary, @Word, LANGUAGE 'English') AS SummaryResults ON ISBNResults.[KEY] = SummaryResults.[KEY] The above code works fine for just searching tblBook table. But now I would like to search also the table tblAuthor based on key word searched. Can you help me with this?

    Read the article

  • Programatically find TFS changes since last good build

    - by abigblackman
    I have several branches in TFS (dev, test, stage) and when I merge changes into the test branch I want the automated build and deploy script to find all the updated SQL files and deploy them to the test database. I thought I could do this by finding all the changesets associated with the build since the last good build, finding all the sql files in the changesets and deploying them. However I don't seem to be having the changeset associated with the build for some reason so my question is twofold: 1) How do I ensure that a changeset is associated with a particular build? 2) How can I get a list of files that have changed in the branch since the last good build? I have the last successfully built build but I'm unsure how to get the files without checking the changesets (which as mentioned above are not associated with the build!)

    Read the article

  • Code Golf: Triforce

    - by chpwn
    This is inspired by/taken from this thread: http://www.allegro.cc/forums/thread/603383 The Problem Assume the user gives you a numeric input ranging from 1 to 7. Input should be taken from the console, arguments are less desirable. When the input is 1, print the following: *********** ********* ******* ***** *** * Values greater than one should generate multiples of the pattern, ending with the one above, but stacked symmetrically. For example, 3 should print the following: *********** *********** *********** ********* ********* ********* ******* ******* ******* ***** ***** ***** *** *** *** * * * *********** *********** ********* ********* ******* ******* ***** ***** *** *** * * *********** ********* ******* ***** *** * Bonus points if you print the reverse as well. *********** *********** ********* ********* ******* ******* ***** ***** *** *** * * *********** ********* ******* ***** *** * * *** ***** ******* ********* *********** * * *** *** ***** ***** ******* ******* ********* ********* *********** *********** Can we try and keep it to one answer per language, that we all improve on?

    Read the article

  • Why is C# winforms application not working without VS.NET installed?

    - by Shane
    Hi folks, I have a winforms c# app that has an embedded webbrowser control inside it generated through VS.NET 2008. We sink events by inheriting our events class from HTMLDocumentEvents2. public class IEHTMLDocumentEvents : mshtml.HTMLDocumentEvents2 { public bool onclick(mshtml.IHTMLEventObj pEvtObj) { // Clicking on an input (checkbox, radio, button, image) if (pEvtObj.srcElement.tagName == "INPUT") { // The following will result in a null pointer without VS.NET installed HTMLInputElementClass input = pEvtObj.srcElement as HTMLInputElementClass; } } } The code above works fine when clicking on elements in the webbrowser control on our dev machines with VS.NET installed. However it fails to cast the pEvtObj.srcElement when VS.NET is not installed. This immediately starts working when we install the most basic VS.NET with C# that you can. To note: The rest of the c# app works fine, and you can browser the web through the control fine as well, just that the events like the above 'onclick' can't be handled properly. I thought it would be a DLL version loaded issue but doing a diff of the files loaded indicates only minor differences. 1c1 < Process: C# App without VS.NET installed --- > Process: C# App with VS.NET 2008 installed 18d17 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\CustomMarshalers\e148983beeb0f30918b0564849a16456\CustomMarshalers.ni.dll CustomMarshalers.ni.dll Microsoft .NET Framework Custom Marshalers Microsoft Corporation 2.0.50727.3053 36d34 < C:\Documents and Settings\XpHome\Local Settings\History\History.IE5\index.dat index.dat 37a36 > C:\Documents and Settings\XpHome\Local Settings\History\History.IE5\index.dat index.dat 44,45c43,44 < C:\Program Files\<hidden>\<hidden>\Microsoft.mshtml.dll Microsoft.mshtml.dll 7.0.3300.1 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\Microsoft.VisualBas#\5b3d048d8c003d743ea5e72caf07773a\Microsoft.VisualBasic.ni.dll Microsoft.VisualBasic.ni.dll Visual Basic Runtime Library Microsoft Corporation 8.0.50727.3053 --- > C:\WINDOWS\assembly\GAC\Microsoft.mshtml\7.0.3300.0__b03f5f7f11d50a3a\Microsoft.mshtml.dll Microsoft.mshtml.dll 7.0.3300.1 > C:\WINDOWS\assembly\GAC_MSIL\Microsoft.VisualBasic\8.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll Microsoft.VisualBasic.dll Visual Basic Runtime Library Microsoft Corporation 8.0.50727.3053 50,52c49,51 < c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll mscorjit.dll Microsoft .NET Runtime Just-In-Time Compiler Microsoft Corporation 2.0.50727.3053 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\mscorlib\9adb89fa22fd5b4ce433b5aca7fb1b07\mscorlib.ni.dll mscorlib.ni.dll Microsoft Common Language Runtime Class Library Microsoft Corporation 2.0.50727.3053 < c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll mscorwks.dll Microsoft .NET Runtime Common Language Runtime - WorkStation Microsoft Corporation 2.0.50727.3053 --- > c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll mscorjit.dll Microsoft .NET Runtime Just-In-Time Compiler Microsoft Corporation 2.0.50727.3082 > C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\mscorlib\7124a40b9998f7b63c86bd1a2125ce26\mscorlib.ni.dll mscorlib.ni.dll Microsoft Common Language Runtime Class Library Microsoft Corporation 2.0.50727.3603 > c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll mscorwks.dll Microsoft .NET Runtime Common Language Runtime - WorkStation Microsoft Corporation 2.0.50727.3603 94,98c93,97 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Configuration\cb4cb21d14767292e079366a5d3d76cd\System.Configuration.ni.dll System.Configuration.ni.dll System.Configuration.dll Microsoft Corporation 2.0.50727.3053 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Drawing\6978f2e90f13bc720d57fa6895c911e2\System.Drawing.ni.dll System.Drawing.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System\aa7926460a336408c8041330ad90929d\System.ni.dll System.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\9a254c455892c02355ab0ab0f0727c5b\System.Windows.Forms.ni.dll System.Windows.Forms.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 < C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Xml\36f3953f24d4f0b767bf172331ad6f3e\System.Xml.ni.dll System.Xml.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 --- > C:\WINDOWS\assembly\GAC_MSIL\System.Configuration\2.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll System.Configuration.dll System.Configuration.dll Microsoft Corporation 2.0.50727.3053 > C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Drawing\abb2ac7e08bee026f857d8fa36f9fe6f\System.Drawing.ni.dll System.Drawing.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 > C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System\3de5bd01124463d7862bd173af90bc83\System.ni.dll System.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 > C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\d2ea8d76f015817db1607075812b555f\System.Windows.Forms.ni.dll System.Windows.Forms.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3053 > C:\WINDOWS\assembly\NativeImages_v2.0.50727_32\System.Xml\5913d3f81e77194ec833991b1047a532\System.Xml.ni.dll System.Xml.ni.dll .NET Framework Microsoft Corporation 2.0.50727.3082

    Read the article

  • Appengine Apps Vs Google bot web crawler

    - by sandeep koduri
    i built an appengine web app cricket.hover.in. The web app consists of about 15k url's linked in it, But even after a long time of my launch, no pages are indexed on google. Any base link place on my root site hover.in are being indexed with in minutes. but i placed the same link home page of root site a long back. but its of no use. can any one analyse , if there is any issue with cricket.hover.in or if bots have any issues with Google app engine actually tested the url using labs app of webmaster tools of google there the return is fine and html is clear. but when tested the same (cricket.hover.in) at the following urls its showing different results of failure www.dnsqueries.com/en/googlebot_simulator.php www.smart-it-consulting.com/internet/google/googlebot-spoofer/ but if i test some of my php or word press links at the above url's the results are good and fine. please help me with this.

    Read the article

  • Designing for the future

    - by Dennis Vroegop
    User interfaces and user experience design is a fast moving field. It’s something that changes pretty quick: what feels fresh today will look outdated tomorrow. I remember the day I first got a beta version of Windows 95 and I felt swept away by the user interface of the OS. It felt so modern! If I look back now, it feels old. Well, it should: the design is 17 years old which is an eternity in our field. Of course, this is not limited to UI. Same goes for many industries. I want you to think back of the cars that amazed you when you were in your teens (if you are in your teens then this may not apply to you). Didn’t they feel like part of the future? Didn’t you think that this was the ultimate in designs? And aren’t those designs hopelessly outdated today (again, depending on your age, it may just be me)? Let’s review the Win95 design: And let’s compare that to Windows 7: There are so many differences here, I wouldn’t even know where to start explaining them. The general feeling however is one of more usability: studies have shown Windows 7 is much easier to understand for new users than the older versions of Windows did. Of course, experienced Windows users didn’t like it: people are usually afraid of changes and like to stick to what they know. But for new users this was a huge improvement. And that is what UX design is all about: make a product easier to use, with less training required and make users feel more productive. Still, there are areas where this doesn’t hold up. There are plenty examples of designs from the past that are still fresh today. But if you look closely at them, you’ll notice some subtle differences. This differences are what keep the designs fresh. A good example is the signs you’ll find on the road. They haven’t changed much over the years (otherwise people wouldn’t recognize them anymore) but they have been changing gradually to reflect changes in traffic. The same goes for computer interfaces. With each new product or version of a product, the UI and UX is changed gradually. Every now and then however, a bigger change is needed. Just think about the introduction of the Ribbon in Microsoft Office 2007: the whole UI was redesigned. A lot of old users (not in age, but in times of using older versions) didn’t like it a bit, but new users or casual users seem to be more efficient using the product. Which, of course, is exactly the reason behind the changes. I believe that a big engine behind the changes in User Experience design has been the web. In the old days (i.e. before the explosion of the internet) user interface design in Windows applications was limited to choosing the margins between your battleship gray buttons. When the web came along, and especially the web 2.0 where the browsers started to act more and more as application platforms, designers stepped in and made a huge impact. In the browser, they could do whatever they wanted. In the beginning this was limited to the darn blink tag but gradually people really started to think about UX. Even more so: the design of the UI and the whole experience was taken away from the developers and put into the hands of people who knew what they were doing: UX designers. This caused some problems. Everyone who has done a web project in the early 2000’s must have had the same experience: the designers give you a set of Photoshop files and tell you to translate it to HTML. Which, of course, is very hard to do. However, with new tooling and new standards this became much easier. The latest version of HTML and CSS has taken the responsibility for the design away from the developers and placed them in the capable hands of the designers. And that’s where that responsibility belongs, after all, I don’t want a designer to muck around in my c# code just as much as he or she doesn’t want me to poke in the sites style definitions. This change in responsibilities resulted in good looking but more important: better thought out user interfaces in websites. And when websites became more and more interactive, people started to expect the same sort of look and feel from their desktop applications. But that didn’t really happen. Most business applications still have that battleship gray look and feel. Ok, they may use a different color but we’re not talking colors here but usability. Now, you may not be able to read the Dutch captions, but even if you did you wouldn’t understand what was going on. At least, not when you first see it. You have to scan the screen, read all the labels, see how they are related to the other elements on the screen and then figure out what they do. If you’re an experienced user of this application however, this might be a good thing: you know what to do and you get all the information you need in one single screen. But for most applications this isn’t the case. A lot of people only use their computer for a limited time a day (a weird concept for me, but it happens) and need it to get something done and then get on with their lives. For them, a user interface experience like the above isn’t working. (disclaimer: I just picked a screenshot, I am not saying this is bad software but it is an example of about 95% of the Windows applications out there). For the knowledge worker, this isn’t a problem. They use one or two systems and they know exactly what they need to do to achieve their goal. They don’t want any clutter on their screen that distracts them from their task, they just want to be as efficient as possible. When they know the systems they are very productive. The point is, how long does it take to become productive? And: could they be even more productive if the UX was better? Are there things missing that they don’t know about? Are there better ways to achieve what they want to achieve? Also: could a system be designed in such a way that it is not only much more easy to work with but also less tiring? in the example above you need to switch between the keyboard and mouse a lot, something that we now know can be very tiring. The goal of most applications (being client apps or websites on any kind of device) is to provide information. Information is data that when given to the right people, on the right time, in the right place and when it is correct adds value for that person (please, remember that definition: I still hear the statement “the information was wrong” which doesn’t make sense: data can be wrong, information cannot be). So if a system provides data, how can we make sure the chances of becoming information is as high as possible? A good example of a well thought-out system that attempts this is the Zune client. It is a very good application, and I think the UX is much better than it’s main competitor iTunes. Have a look at both: On the left you see the iTunes screenshot, on the right the Zune. As you notice, the Zune screen has more images but less chrome (chrome being visuals not part of the data you want to show, i.e. edges around buttons). The whole thing is text oriented or image oriented, where that text or image is part of the information you need. What is important is big, what’s less important is smaller. Yet, everything you need to know at that point is present and your attention is drawn immediately to what you’re trying to achieve: information about music. You can easily switch between the content on your machine and content on your Zune player but clicking on the image of the player. But if you didn’t know that, you’d find out soon enough: the whole UX is designed in such a way that it invites you to play around. So sooner or later (probably sooner) you’d click on that image and you would see what it does. In the iTunes version it’s harder to find: the discoverability is a lot lower. For inexperienced people the Zune player feels much more natural than the iTunes player, and they get up to speed a lot faster. How does this all work? Why is this UX better? The answer lies in a project from Microsoft with the codename (it seems to be becoming the official name though) “Metro”. Metro is a design language, based on certain principles. When they thought about UX they took a good long look around them and went out in search of metaphors. And they found them. The team noticed that signage in streets, airports, roads, buildings and so on are usually very clear and very precise. These signs give you the information you need and nothing more. It’s simple, clearly understood and fast to understand. A good example are airport signs. Airports can be intimidating places, especially for the non-experienced traveler. In the early 1990’s Amsterdam Airport Schiphol decided to redesign all the signage to make the traveller feel less disoriented. They developed a set of guidelines for signs and implemented those. Soon, most airports around the world adopted these ideas and you see variations of the Dutch signs everywhere on the globe. The signs are text-oriented. Yes, there are icons explaining what it all means for the people who can’t read or don’t understand the language, but the basic sign language is text. It’s clear, it’s high-contrast and it’s easy to understand. One look at the sign and you know where to go. The only thing I don’t like is the green sign pointing to the emergency exit, but since this is the default style for emergency exits I understand why they did this. If you look at the Zune UI again, you’ll notice the similarities. Text oriented, little or no icons, clear usage of fonts and all the information you need. This design language has a set of principles: Clean, light, open and fast Content, not chrome Soulful and alive These are just a couple of the principles, you can read the whole philosophy behind Metro for Windows Phone 7 here. These ideas seem to work. I love my Windows Phone 7. It’s easy to use, it’s clear, there’s no clutter that I do not need. It works for me. And I noticed it works for a lot of other people as well, especially people who aren’t as proficient with computers as I am. You see these ideas in a lot other places. Corning, a manufacturer of glass, has made a video of possible usages of their products. It’s their glimpse into the future. You’ll notice that a lot of the UI in the screens look a lot like what Microsoft is doing with Metro (not coincidentally Corning is the supplier for the Gorilla glass display surface on the new SUR40 device (or Surface v2.0 as a lot of people call it)). The idea behind this vision is that data should be available everywhere where you it. Systems should be available at all times and data is presented in a clear and light manner so that you can turn that data into information. You don’t need a lot of fancy animations that only distract from the data. You want the data and you want it fast. Have a look at this truly inspiring video that made: This is what I believe the future will look like. Of course, not everything is possible, or even desirable. But it is a nice way to think about the future . I feel very strongly about designing applications in such a way that they add value to the user. Designing applications that turn data into information. Applications that make the user feel happy to use them. So… when are you going to drop the battleship-gray designs? Tags van Technorati: surface,design,windows phone 7,wp7,metro

    Read the article

  • How to "bubble" a Controls features when place in a custom UserControl

    - by Ted
    I'll try to explain what Im after. I dont know the technical term for it, so here goes: Example 1: If I place a LisView on a Form and add som columns I am able, in Design-Time, to click-and-drag the columns to resize them. Example 2: Now, I place a ListView in a UserControl and name it "MyCustomListView" (and perhaps add some method to enhance it somehow). If I know place the "MyCustomListView" on a Form I am unable to click-and-drag the column headers to resize them in Design-Time. Is there any way to easily make that happen? Some form of "pass the click-and-drag event to the underlying control and let that control do its magic". Im not really looking to recode, just pass on the mouseclick (or whatever it is) and let the, in this case, ListView react as it did in the first example above. Regards

    Read the article

  • cordova :: XMLHttpRequest :: setRequestHeader does not work with JSONP

    - by Aaron Saunders
    in hello world cordova 2.3.0 app trying to work with ripple added basic BackboneJS code and I get error shown above <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.0/jquery.min.js"></script> <script type="text/javascript" src="http://static.stackmob.com/js/json2-min.js"></script> <script type="text/javascript" src="http://static.stackmob.com/js/underscore-1.4.3-min.js"></script> <script type="text/javascript" src="http://static.stackmob.com/js/backbone-0.9.10-min.js"></script> I have started google with the proper flags --allow-file-access-from-files

    Read the article

  • Slow SQL Sync with Microsoft Sync Framework on Mobile Client

    - by Malkier
    Hello, we are developing an application which uses MS Sync Framework to sync data between Windows CE 6.0 with SQL CE 3.5 SP1 Clients and an SQL 2008 Database. Our major problem is a slow sync time up to 1 minute for 15 tables which are totally empty. Here's a break down of our components: Server: Sql Server 2008 15 tables with activated change tracking WCF Service with endpoint for the mobile sync (uses Sync Framework 2.0) Client (Mobile) Windows CE 6.0 NET Application using Sync Framework for Devices (CTP 1) which starts the sync As I mentioned above, the sync takes up to 1 minute without any changes and empty tables. The mobile device is in its dock. This is a deal breaker for a production environment. Does anybody have any experience in this field? Is there a way to improve things? Thanks for any responses.

    Read the article

  • Flash swf to play PCM WAV files?

    - by Geuis
    I am in need of a Flash swf that is capable of loading PCM WAV files via a url passed to it. An example of the file can be found here: http://msdn.microsoft.com/en-us/library/ff512405.aspx The swf does not need a visible interface, as it is meant for audio playing only and not user interaction. The swf should have a simple javascript interface for page-level interactions. These include: load(url): loads a PCM WAV file over the internet using the url that is passed through it. play(): Should play the PCM WAV file that was loaded stop(): Should stop playing the current file. I can provide a sample audio file that matches the specifications if the developer is unable to obtain a url from the link posted above.

    Read the article

  • Clipping different parts of an image with path

    - by huggie
    I've recently asked a question about clipping an image via path at view's drawRect method. http://stackoverflow.com/questions/2570653/iphone-clip-image-with-path Krasnyk's code is copied below. - (void)drawRect:(CGRect)rect { CGContextRef context = UIGraphicsGetCurrentContext(); CGMutablePathRef path = CGPathCreateMutable(); //or for e.g. CGPathAddRect(path, NULL, CGRectInset([self bounds], 10, 20)); CGPathAddEllipseInRect(path, NULL, [self bounds]); CGContextAddPath(context, path); CGContextClip(context); CGPathRelease(path); [[UIImage imageNamed:@"GC.png"] drawInRect:[self bounds]]; } It works very well. However, when my image is larger than the view itself, how do I show different parts of the image? I tried tweaking around with translation on the locations (show as bounds above) of ellipse and/or UIImage drawInRect but some complex effects (Unwanted clipping, weird elipse size) I can't explain happens.

    Read the article

  • shell_exec() in PHP

    - by Amar Ravikumar
    <?php // Execute a shell script $dump = shell_exec('bigfile.sh'); // This script takes some 10s to complete execution print_r($dump); // Dump log to screen ?> When the script above is executed from the browser, it loads for 10s and the dumps the output of the script to the screen. This is, of course, normal. But if I want the data written to STDOUT by the shell script to be displayed on the screen in real-time, is there some way I could do it?

    Read the article

  • Java apache poi setting the cell formula

    - by Ray
    I am try to set a cell formulat that references cells from other workbooks. However, when I open the programmatically generated workbook, the formula cells show up as #REF!. I print out the formulas that were generated in a log. If I cut and paste those into the cells, the numbers from the external workbooks is pulled in. String formula = "'C:\\tmp\\ForecastAggregate\\Total Products\\[ForecastWorksheet.xls]2010 Budget'!C10"; HSSFCell cell = row.createCell(0); //row was created above cell.setCellFormula(formula); Can anybode help?

    Read the article

  • Seeking enlightenment - global variables in AppEngine (aeoid.get_current_user())

    - by jerd
    Hello This may be a 'Python Web Programming 101' question, but I'm confused about some code in the aeoid project (http://github.com/Arachnid/aeoid). here's the code: _current_user = None def get_current_user(): """Returns the currently logged in user, or None if no user is logged in.""" global _current_user if not _current_user and 'aeoid.user' in os.environ: _current_user = User(None, _from_model_key=os.environ['aeoid.user']) return _current_user But my understanding was that global variables were, ehm, global! And so different requests from different users could (potentially) access and update the same value, hence the need for sessions, in order to store per-user, non-global variables. So, in the code above, what prevents one request from believing the current user is the user set by another request? Sorry if this is basic, it's just not how i thought things worked. Thanks

    Read the article

  • Objective-C "miscasting" a string/int using stringWithFormat and %d

    - by user141146
    Hi, I think this is a relatively simple question, but I don't precisely know what's happening. I have a method that tries to build a string using NSString's stringWithFormat It looks like this: NSString *line1 = [NSString stringWithFormat:@"the car is %d miles away", self.ma]; In the above line "self.ma" should be an int, but in my case, I made an error and "self.ma" actually points to a NSString. So, I understand that the line should read NSString *line1 = [NSString stringWithFormat:@"the car is %@ miles away", self.ma]; but my question is what is the %d in the first example doing to my NSString? If I use the debugger, I can see that in once case, "self.ma" equals "32444", but somehow the %d converts it to 1255296. I would've guessed that the conversion of 32444 = 1255296 is some type of base-numbering conversion (hex to dec or something), but that doesn't appear to be the case. Any idea as to what %d is doing to my string? TIA

    Read the article

  • Macros's that define macros

    - by David Thornley
    Does anyone know how to pull off something like this... I have alot of repetitive macros as : - #define MYMACRO1(x) Do1(x) #define MYMACRO2(x,y) Do2(x, y) #define MYNEXTMACRO1(x) Do1(x) #define MYNEXTMACRO2(x,y) Do2(x, y) The code above works fine, but I want to write a macro that creates macros (a meta macro). For example: - #define MYMETAMACRO(name) \ #define #name1(x) Do1(x) \ #define #name2(x,y) Do2(x, y) \ Such that I can do : - MYMETAMACRO(MYMACRO); MYMETAMACRO(MYNEXTMACRO); and then : - MYMACRO1(2); MYMACRO2(2,3); MYNEXTMACRO1(4); MYNEXTMACRO2(4, 5); The preprocessor bombs out at the #define as it thinks it is a missing parameter of the macro.

    Read the article

  • Struts 1 - struts-taglib.jar is not being found by my web application

    - by Yatendra Goel
    I am using Struts-1. I have developed a struts-based web application. I am using struts tags in my JSP pages supplied in struts-taglib.jar by inserting the following lines in the JSP file: <%@ taglib prefix="html" uri="http://struts.apache.org/tags-html" %> <%@ taglib prefix="logic" uri="http://struts.apache.org/tags-logic" %> <%@ taglib prefix="bean" uri="http://struts.apache.org/tags-bean" %> Now the application is working fine when I run it on my localsystem but when I deploy it on a server, it shows the following exception: org.apache.jasper.JasperException: The absolute uri: http://struts.apache.org/tags-html cannot be resolved in either web.xml or the jar files deployed with this application From the above exception, it seems that the application hasn't found the struts-taglib.jar file. But I have put the struts-taglib.jar in /WEB-INF/lib directory. Then where is the problem? Note: You can also look at http://stackoverflow.com/questions/2452492/java-problem-in-deploying-web-application for more information

    Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >