Search Results

Search found 21644 results on 866 pages for 'connection speed'.

Page 311/866 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• Realtek RTL8111/8168B wired network doesn't work anymore

  - by Radar4002

  This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

  Read the article

• Ubuntu to Ubuntu VNC over SSH tunnel

  - by rxt

  I have a Linux Ubuntu desktop at home, ssh enabled, vnc server installed, router rule configured. It all works, and at home I can connect via the local network from my Mac. From the outside I can login via ssh. I've configured putty as follows: session: host name and port number connection ssh tunnel: forwarded ports: L5900|192.168.0.23 the local address is: 192.168.1.45 When I make the connection I can login to the remote machine. Then I open Remote Desktop Viewer. I click connect protocol: vnc host: ? use host as ssh tunnel: ? I don't know what to use for the last two options. Which ip-addresses should I use?

  Read the article

• How to get Broadcom BCM 43XX Wireless card working

  - by Fer1805

  NOTE - Although this question is for a specific version of Ubuntu and a specific Broadcom model, the answer to it is for most Broadcom models and versions of Ubuntu 11.04, 11.10, 12.04 and 12.10. If you have come here from another question, feel free to read the answer instead. The answer covers many problems with several solutions. I'm having serious problems installing the Broadcom drivers for Ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. How can I get Broadcom BCM4311 Wireless working? Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• What's constitute an entry on the IPTables and how to find out which client it is originated from

  - by cbd

  I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

  Read the article

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• can't connect to Sql Sever Management Express 2012

  - by Rare-Man

  i installed Sql Sever Management Express 2012 , but when i try to connect in Sql management studio enviroment , i have this error . TITLE: Connect to Server Cannot connect to .. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476 The system cannot find the file specified BUTTONS: OK ................................................................................... and in during installion i dont have option for select cluster !! this is my SQL Server Configuration Manager , my sql server service is empty ... And when get Remove a Failover Cluster Node , this error happened . http://oi57.tinypic.com/2lrvat.jpg

  Read the article

• SQL Azure Security: DoS

  - by Herve Roggero

  Since I decided to understand in more depth how SQL Azure works I started to dig into its performance characteristics. So I decided to write an application that allows me to put SQL Azure to the test and compare results with a local SQL Server database. One of the options I added is the ability to issue the same command on multiple threads to get certain performance metrics. That's when I stumbled on an interesting security feature of SQL Azure: its Denial of Service (DoS) detection engine. What this security feature does is that it performs a check on the number of connections being established, and if the rate of connection is too high, SQL Azure blocks all communication from that machine. I am still trying to learn more about this specific feature, but it appears that going to the SQL Azure portal and testing the connection from the portal "resets" the feature and you are allowed to connect again... until you reach the login threashold. In the specific test I was performing, all the logins were successful. I haven't tried to login with an invalid account or password... that will be for next time. On my Linked In group (SQL Server and SQL Azure Security: http://www.linkedin.com/groups?gid=2569994&trk=hb_side_g) Chip Andrews (www.sqlsecurity.com) pointed out that this feature in itself could present an internal threat. In theory, a rogue application could be issuing many login requests from a NATed network, which could potentially prevent any production system from connecting to SQL Azure within the same network. My initial response was that this could indeed be the case. However, while the TCP protocol contains the latest NATed IP address of a machine (which masks the origin of the machine making the SQL request), the TDS protocol itself contains the IP Address of the machine making the initial request; so technically there would be a way for SQL Azure to block only the internal IP address making the rogue requests.  So this warrants further investigation... stay tuned...

  Read the article

• how can make transparent proxy on more than one port?

  - by ermya

  i want to make transparent proxy with linux ( centos) , i want all incoming connection on port 1000 - 2000 on eth0 forward to eth1 on port 1000 - 2000 in transparent mode i have 2 server 1- linux ( proxy server) 2- windows i want protect my windows server with my linux server firewall also i must make transparent proxy with my linux server linux server have 2 interface one for public network an another for private network connected to windows server so all incoming connection must connect to the linux server (at eth0 public network) first and after checking , must forward to the windows server on private network (with linux interface eth1 ) i can use squid for making transparent proxy but i dont know how i must config the squid for multi port because i want listen in more than 1000 ports for example from port 1000 to 2000 anyone know how can i do ?

  Read the article

• How to connect to DSL modem using PPPoE?

  - by VJo

  Hello, I am connecting to the internet through a pppoe connection, but for some reason I can not connect to my modem (it's address is 192.168.1.1). Before I set my pppoe connection, I could connect. So, is there a way? EDIT The output of ifconfig is : r@PlaviZec:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:13:d4:f7:02:d4 inet6 addr: fe80::213:d4ff:fef7:2d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2811 errors:0 dropped:0 overruns:0 frame:0 TX packets:2801 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2538831 (2.5 MB) TX bytes:448591 (448.5 KB) Interrupt:21 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1600 (1.6 KB) TX bytes:1600 (1.6 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:92.229.42.177 P-t-P:213.191.64.59 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:2794 errors:0 dropped:0 overruns:0 frame:0 TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2476277 (2.4 MB) TX bytes:381240 (381.2 KB)

  Read the article

• Filemaker 10 Advanced sending email via script & SMTP

  - by Sean

  We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

  Read the article

• Policy Routing with Openvpn?

  - by sadawd

  Dear Everyone I am currently using openvpn for normal browsing. However, I have the following services running: a bit torrent client, a web server, IRC and a git server which I would really want it to not be using my vpn connection (and use my original connection instead). Is there a way to do this? I looked up policy routing and I can't really find any tutorial on how to do this on linux (I am on ubuntu). I don't want the solution to be incredibly complicated - I am pretty new to networking in ubuntu and I only want a very simple solution to this problem. Can someone help me out?

  Read the article

• How to develop RPG Damage Formulas?

  - by user127817

  I'm developing a classical 2d RPG (in a similar vein to final fantasy) and I was wondering if anyone had some advice on how to do damage formulas/links to resources/examples? I'll explain my current setup. Hopefully I'm not overdoing it with this question, and I apologize if my questions is too large/broad My Characters stats are composed of the following: enum Stat { HP = 0, MP = 1, SP = 2, Strength = 3, Vitality = 4, Magic = 5, Spirit = 6, Skill = 7, Speed = 8, //Speed/Agility are the same thing Agility = 8, Evasion = 9, MgEvasion = 10, Accuracy = 11, Luck = 12, }; Vitality is basically defense to physical attacks and spirit is defense to magic attacks. All stats have fixed maximums (9999 for HP, 999 for MP/SP and 255 for the rest). With abilities, the maximums can be increased (99999 for HP, 9999 for HP/SP, 999 for the rest) with typical values (at level 100) before/after abilities+equipment+etc will be 8000/20,000 for HP, 800/2000 for SP/MP, 180/350 for other stats Late game Enemy HP will typically be in the lower millions (with a super boss having the maximum of ~12 million). I was wondering how do people actually develop proper damage formulas that scale correctly? For instance, based on this data, using the damage formulas for Final Fantasy X as a base looked very promising. A full reference here http://www.gamefaqs.com/ps2/197344-final-fantasy-x/faqs/31381 but as a quick example: Str = 127, 'Attack' command used, enemy Def = 34. 1. Physical Damage Calculation: Step 1 ------------------------------------- [{(Stat^3 ÷ 32) + 32} x DmCon ÷16] Step 2 ---------------------------------------- [{(127^3 ÷ 32) + 32} x 16 ÷ 16] Step 3 -------------------------------------- [{(2048383 ÷ 32) + 32} x 16 ÷ 16] Step 4 --------------------------------------------------- [{(64011) + 32} x 1] Step 5 -------------------------------------------------------- [{(64043 x 1)}] Step 6 ---------------------------------------------------- Base Damage = 64043 Step 7 ----------------------------------------- [{(Def - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------ [{(34 - 280.4)^2} ÷ 110] + 16 Step 9 ------------------------------------------------- [(-246)^2) ÷ 110] + 16 Step 10 ---------------------------------------------------- [60516 ÷ 110] + 16 Step 11 ------------------------------------------------------------ [550] + 16 Step 12 ---------------------------------------------------------- DefNum = 566 Step 13 ---------------------------------------------- [BaseDmg * DefNum ÷ 730] Step 14 --------------------------------------------------- [64043 * 566 ÷ 730] Step 15 ------------------------------------------------------ [36248338 ÷ 730] Step 16 ------------------------------------------------- Base Damage 2 = 49655 Step 17 ------------ Base Damage 2 * {730 - (Def * 51 - Def^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ---------------------- 49655 * {730 - (34 * 51 - 34^2 ÷ 11) ÷ 10} ÷ 730 Step 19 ------------------------- 49655 * {730 - (1734 - 1156 ÷ 11) ÷ 10} ÷ 730 Step 20 ------------------------------- 49655 * {730 - (1734 - 105) ÷ 10} ÷ 730 Step 21 ------------------------------------- 49655 * {730 - (1629) ÷ 10} ÷ 730 Step 22 --------------------------------------------- 49655 * {730 - 162} ÷ 730 Step 23 ----------------------------------------------------- 49655 * 568 ÷ 730 Step 24 -------------------------------------------------- Final Damage = 38635 I simply modified the dividers to include the attack rating of weapons and the armor rating of armor. Magic Damage is calculated as follows: Mag = 255, Ultima is used, enemy MDef = 1 Step 1 ----------------------------------- [DmCon * ([Stat^2 ÷ 6] + DmCon) ÷ 4] Step 2 ------------------------------------------ [70 * ([255^2 ÷ 6] + 70) ÷ 4] Step 3 ------------------------------------------ [70 * ([65025 ÷ 6] + 70) ÷ 4] Step 4 ------------------------------------------------ [70 * (10837 + 70) ÷ 4] Step 5 ----------------------------------------------------- [70 * (10907) ÷ 4] Step 6 ------------------------------------ Base Damage = 190872 [cut to 99999] Step 7 ---------------------------------------- [{(MDef - 280.4)^2} ÷ 110] + 16 Step 8 ------------------------------------------- [{(1 - 280.4)^2} ÷ 110] + 16 Step 9 ---------------------------------------------- [{(-279.4)^2} ÷ 110] + 16 Step 10 -------------------------------------------------- [(78064) ÷ 110] + 16 Step 11 ------------------------------------------------------------ [709] + 16 Step 12 --------------------------------------------------------- MDefNum = 725 Step 13 --------------------------------------------- [BaseDmg * MDefNum ÷ 730] Step 14 --------------------------------------------------- [99999 * 725 ÷ 730] Step 15 ------------------------------------------------- Base Damage 2 = 99314 Step 16 ---------- Base Damage 2 * {730 - (MDef * 51 - MDef^2 ÷ 11) ÷ 10} ÷ 730 Step 17 ------------------------ 99314 * {730 - (1 * 51 - 1^2 ÷ 11) ÷ 10} ÷ 730 Step 18 ------------------------------ 99314 * {730 - (51 - 1 ÷ 11) ÷ 10} ÷ 730 Step 19 --------------------------------------- 99314 * {730 - (49) ÷ 10} ÷ 730 Step 20 ----------------------------------------------------- 99314 * 725 ÷ 730 Step 21 -------------------------------------------------- Final Damage = 98633 The problem is that the formulas completely fall apart once stats start going above 255. In particular Defense values over 300 or so start generating really strange behavior. High Strength + Defense stats lead to massive negative values for instance. While I might be able to modify the formulas to work correctly for my use case, it'd probably be easier just to use a completely new formula. How do people actually develop damage formulas? I was considering opening excel and trying to build the formula that way (mapping Attack Stats vs. Defense Stats for instance) but I was wondering if there's an easier way? While I can't convey the full game mechanics of my game here, might someone be able to suggest a good starting place for building a damage formula? Thanks

  Read the article

• libpam-ldapd not looking for secondary groups

  - by Jorge Suárez de Lis

  I'm migrating from libpam-ldap to libpam-ldapd. I'm having some trouble gathering the secondary groups from LDAP. On libpam-ldap, I had this on the /etc/ldap.conf file: nss_schema rfc2307bis nss_base_passwd ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es nss_base_shadow ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es nss_base_group ou=Groups,ou=CITIUS,dc=inv,dc=usc,dc=es nss_map_attribute uniqueMember member The mapping is there because I'm using groupOfNames instead of groupOfUniqueNames LDAP class for groups, so the attribute naming the members is named member instead of uniqueMember. Now, I want to do the same using libpam-ldapd but I can't get it to work. Here's the relevant part of my /etc/nslcd.conf: base passwd ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es base shadow ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es base group ou=Groups,ou=CITIUS,dc=inv,dc=usc,dc=es map group uniqueMember member And this is the debug output from nslcd, when a user is authenticated: nslcd: [8b4567] DEBUG: connection from pid=12090 uid=0 gid=0 nslcd: [8b4567] DEBUG: nslcd_passwd_byuid(4004) nslcd: [8b4567] DEBUG: myldap_search(base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(&(objectClass=posixAccount)(uidNumber=4004))") nslcd: [8b4567] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [8b4567] DEBUG: ldap_set_rebind_proc() nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [8b4567] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [8b4567] DEBUG: ldap_simple_bind_s("uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [8b4567] connected to LDAP server ldap://172.16.54.31/ nslcd: [8b4567] DEBUG: ldap_result(): end of results nslcd: [7b23c6] DEBUG: connection from pid=15906 uid=0 gid=2000 nslcd: [7b23c6] DEBUG: nslcd_pam_authc("jorge.suarez","","su","***") nslcd: [7b23c6] DEBUG: myldap_search(base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(&(objectClass=posixAccount)(uid=jorge.suarez))") nslcd: [7b23c6] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [7b23c6] DEBUG: ldap_set_rebind_proc() nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_simple_bind_s("uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [7b23c6] connected to LDAP server ldap://172.16.54.31/ nslcd: [7b23c6] DEBUG: ldap_initialize(ldap://172.16.54.31/) nslcd: [7b23c6] DEBUG: ldap_set_rebind_proc() nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_PROTOCOL_VERSION,3) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_DEREF,0) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMELIMIT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_NETWORK_TIMEOUT,10) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_REFERRALS,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_set_option(LDAP_OPT_RESTART,LDAP_OPT_ON) nslcd: [7b23c6] DEBUG: ldap_simple_bind_s("uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es","*****") (uri="ldap://172.16.54.31/") nslcd: [7b23c6] connected to LDAP server ldap://172.16.54.31/ nslcd: [7b23c6] DEBUG: myldap_search(base="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es", filter="(objectClass=posixAccount)") nslcd: [7b23c6] DEBUG: ldap_unbind() nslcd: [3c9869] DEBUG: connection from pid=15906 uid=0 gid=2000 nslcd: [3c9869] DEBUG: nslcd_pam_sess_o("jorge.suarez","uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es","su","/dev/pts/7","","jorge.suarez") It seems to me that it won't even try to look for groups. What I am doing wrong? I can't see anything relevant to my problem information on the docs. I'm probably not understanding how the map option works.

  Read the article

• s3fs: how to force remount on errors?

  - by Alexander Gladysh

  I use s3fs 1.33 on Ubuntu 9.10. Regularily it gives me errors like this: rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: close failed on "/mnt/s3/mybucket/filename": Software caused connection abort (103) rsync error: error in file IO (code 11) at receiver.c(731) [receiver=3.0.6] rsync: connection unexpectedly closed (86 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(600) [sender=3.0.6] Any attempt to work with mounted directory after that gives this error: Transport endpoint is not connected To get rid of this, I have to remount. Is there a way to force a remount automatically?

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM [closed]

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Problem adding public key for apt

  - by highBandWidth

  I was trying to get the official mongodb for Ubuntu, following the instructions at http://www.mongodb.org/display/DOCS/Ubuntu+and+Debian+packages After adding the deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen line in my sources, I need to add the pgp key since synaptic says W: GPG error: http://downloads-distro.mongodb.org dist Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9ECBEC467F0CEB10 Again following instructions, I did sudo apt-key adv --keyserver keyserver.ubuntu.com --recv 7F0CEB10 this says Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 7F0CEB10 gpg: requesting key 7F0CEB10 from hkp server keyserver.ubuntu.com ?: keyserver.ubuntu.com: Connection refused gpgkeys: HTTP fetch error 7: couldn't connect: Connection refused gpg: no valid OpenPGP data found. gpg: Total number processed: 0 Interestingly, I also get $ apt-key list gpg: fatal: /home/myname/.gnupg: directory does not exist! secmem usage: 0/0 bytes in 0/0 blocks of pool 0/32768 How can I get apt to use this source?

  Read the article

• How do I bridge connections in windows 7?

  - by Wolfgang Haak

  At work, our ISP has gone down, 3 days running. A company next door has kindly provided us with access to their wireless network, and I'd like to get our internal mail server (win 7) to become online via that wireless connection, while being accessible from within the LAN, but I'm struggling with the windows configuration. Our company's LAN subnet (wired interface) sits on 192.168.0. Neighbour's wireless subnet 192.168.1. I've tried bridging the connections but that disconnects the mail server from the Internet connection and the LAN. what do I have to do achieve this networking configuration? Kind regards, Wolfgang

  Read the article

• connecting to freenx server : configuration error

  - by Sandeep

  I am not able to pin point what is missing. I have configured freenx-server (useradd, passwd etc). However, server drops the connection after authentication. Please note my server is ubuntu 10.04 and client recent version. Below is the error log NX> 203 NXSSH running with pid: 6016 NX> 285 Enabling check on switch command NX> 285 Enabling skip of SSH config files NX> 285 Setting the preferred NX options NX> 200 Connected to address: 192.168.2.2 on port: 22 NX> 202 Authenticating user: nx NX> 208 Using auth method: publickey HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.5.0) NX> 105 hello NXCLIENT - Version 3.2.0 NX> 134 Accepted protocol: 3.2.0 NX> 105 SET SHELL_MODE SHELL NX> 105 SET AUTH_MODE PASSWORD NX> 105 login NX> 101 User: sandeep NX> 102 Password: NX> 103 Welcome to: ubuntu user: sandeep NX> 105 listsession --user="sandeep" --status="suspended,running" --geometry="1366x768x24+render" --type="unix-gnome" NX> 127 Sessions list of user 'sandeep' for reconnect: Display Type Session ID Options Depth Screen Status Session Name ------- ---------------- -------------------------------- -------- ----- -------------- ----------- ------------------------------ NX> 148 Server capacity: not reached for user: sandeep NX> 105 startsession --link="lan" --backingstore="1" --encryption="1" --cache="16M" --images="64M" --shmem="1" --shpix="1" --strict="0" --composite="1" --media="0" --session="t" --type="unix-gnome" --geometry="1366x768" --client="linux" --keyboard="pc105/us" --screeninfo="1366x768x24+render" ssh_exchange_identification: Connection closed by remote host NX> 280 Exiting on signal: 15

  Read the article

• Gateway setting is empty

  - by Dodi Jones

  This laptop hasn't been used in almost a year. It connected to the internet just fine last time used. Now it can't get on line. ipconfig:The Gateway setting for this computer is empty. Make sure your access point is working properly. Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Dodi>IPCONFIG /ALL Windows IP Configuration Host Name . . . . . . . . . . . . : 8A287A4ADEF0487 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LAN-Express AS IEEE 802.11g miniPCI Adapter Physical Address. . . . . . . . . : 00-14-A4-72-37-E1 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.1 Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection Physical Address. . . . . . . . . : 00-01-4A-EF-A8-7D How do I fix this?

  Read the article

• 421 Concurrent Connections - Ratelimit from helpdesk to rackspace server

  - by g18c

  We have Kayako helpdesk running on our WHM Linux server. When e-mails come in from customers, notifications are sent out by Kayako to a number of staff whose mailboxes are hosted on Rackspace mail servers. I noticed a large queue in the Exim queued message viewer of WHM - when looking in Exim logs I can see many lines 2012-10-13 20:06:56 1TN72s-0007Cw-1l SMTP error from remote mail server after initial connection: host mx2.emailsrvr.com [173.203.2.32]: 421 Too many concurrent connections from this client. One client email results in about 5 emails to rackspace servers, perhaps 60 emails per 1 hour on average - not a huge amount but enough to cause messages to be rejected when sent in short bursts. In this case ideally if we can limit the connections sent to the rackspace server we can comply with their limit. For our requirements if we send 1 email every10 seconds or so, this would be OK. Messages to all other servers should go through a normal rates, only mx1.emailsrvr.com and mx2.emailsrvr.com should have this connection limit policy applied. Is this possible?

  Read the article

• Multiple CAS servers with Microsoft Exchange and selective authorization

  - by John Wilcox

  I have a Microsoft Exchange 2010 organization within one Microsoft Windows domain and I have users accessing it through OWA. For simplicity lets say I currently have one CAS server (CAS 1) which is accessible only through a VPN connection. Lets call the users connecting to the first CAS group a. For some users though, I need to install another CAS server (CAS 2) so that they can connect without using a VPN connection. Lets call those users group b. What I need to achieve is that group a can only log in to CAS 1 and group b can only log in to CAS 2. Now I know that one can disable/enable OWA per user but in my case that is not enough because OWA must be enabled for both groups.

  Read the article

• HOw to give static ip to router from window XP LAN

  - by Captain Planet

  I have the USB modem internet connection. I am using ICS sharing in XP to share my internet connection. ON window XP LAN i have set up the LAN IP as 192.168.137.1 255.255.255.0 Now i have joined the cable from that XP LAN to another LAPTOP running vista Now if set the LAN on VISTA to get ip automatically them internet don't work but if manually set the ip to 192.168.137.3 255.255.255.0 gateway 192.168.137.1 Then my internet works But i want to join that LAN cable from XP to rouer so that i can use router to divide internet. But i don't know how i can give static ipto router because i think somehow that LAN on XP is not giving the IP address

  Read the article

• Virtual machine won't connect to networking interface

  - by Keyo

  I have moved my virtual box hard drive (.vdi file) from windows7 on a laptop, to windows7 on a desktop. No big deal I thought. The OS is ubuntu 10.10. Now networking is broken. I don't have a solid understanding of windows networking, maybe someone can help. Anyway, the networking no longer works. I've tried to setup eth0. I have virtualbox setup in bridge mode, my wifi connection on windows to an intel card on the virtualbox side. I think it might be something to do with windows not allowing the connection to bridge properly (security issues). I've provided some screenshots, which will hopefully help.

  Read the article

• DDWRT or similar as repeater in a network.

  - by Quantumplation

  I have a friend with sever connection issues due to her wireless router being on the bottom floor of her house, and the computer being a story or two away. I have several old Linksys routers lying about, one of which is currently running DDWRT for my network. Would it be a good idea (effective) to configure one of these routers as a wireless bridge of some kind in an intermediary floor to improve her connection? Is there any specific configuration beyond the standard DDWRT setup that I would need to do? Thanks for your help. =)

  Read the article

• Tomcat can't talk to MySql after outage

  - by gav

  I missed a payment for my server and hey suspended my account for a day or so. When they brought the server back up all my data was in tact but for some reason Tomcat can't make a JDBC connection to my MySql server. They both run on the same machine and hence I have a bind address of 127.0.0.1. It's strange because I have reset the machine of my own accord before without issue but clearly something has been reset in the downtime. I followed this guide (Just the bits which don't concern S3, I am not on Amazon infrastructure) originally and everything worked as expected. I'm very new to being a SysAdmin and I'm not sure what to try, how would you go about diagnosing this issue? The stack trace I get is as follows; INFO: Deploying web application archive myapp-1.1.war 2010-05-26 22:07:22,221 [main] ERROR context.ContextLoader - Context initialization failed org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'messageSource': Initialization of bean failed; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager': Cannot resolve reference to bean 'sessionFactory' while setting bean property 'sessionFactory'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'sessionFactory': Cannot resolve reference to bean 'hibernateProperties' while setting bean property 'hibernateProperties'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'hibernateProperties': Cannot resolve reference to bean 'dialectDetector' while setting bean property 'properties' with key [hibernate.dialect]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'dialectDetector': Invocation of init method failed; nested exception is org.springframework.jdbc.support.MetaDataAccessException: Could not get Connection for extracting meta data; nested exception is org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.codehaus.groovy.grails.commons.spring.ReloadAwareAutowireCapableBeanFactory.doCreateBean(ReloadAwareAutowireCapableBeanFactory.java:129) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193) at org.springframework.context.support.AbstractApplicationContext.initMessageSource(AbstractApplicationContext.java:714) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:404) at org.codehaus.groovy.grails.commons.spring.GrailsWebApplicationContext.refresh(GrailsWebApplicationContext.java:153) ... I get this error for a number of 'beans'. If I type mysql at my command prompt then I can easily login with the same credentials as my grails app which uses GORM and Hibernate to persist objects to the DB. I might not have given enough info to start with but I'm really interested to learn and will certainly provide it if asked, I just really don't know where to start on this one. Thanks, Gav

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >