Search Results

Search found 8914 results on 357 pages for 'pocket pc'.

Page 311/357 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• Looking to replace Ghost with FSArchiver or Clonezilla, few questions about capabilities

  - by Daniel Wright

  I work for a PC Repair company and we are looking into setting up a dedicated machine with externally accessible SATA bays to clone harddrives as a safety net incase something goes wrong during a repair. We currently use a SATA/PATA to USB bridge called MagicBridge and Norton Ghost on any workstation, but we're looking to move away from Ghost. We have a computer with a large RAID5 array with Windows Server 2008 Standard currently installed, but this can be replaced with a flavour of *nix. I have some experience with Clonezilla, but FSArchiver also seems like a suitable replacment too. My Head Technician wants to know if my chosen solution (probably Clonezilla or FSArchiver, but I'm open to free suggestions) is capable of: Cloning a degraded RAID, such as a single drive from a RAID1 mirror without complaining Producing images that are easily mountable (he'd prefer them to be mountable in Windows, but if there is no other easy way, *nix should be fine) akin to Ghost Explorer so individual files can be restored as well as being able to do bare metal restores. My apologies for wordiness but I wanted to be thorough in my explaination. Thanks for any suggestions or tips :) EDIT: I've just found out that Clonezilla has a workaround for cloning RADI1 drives EDIT2: Found the answer to both of my questions, aparently I wasn't phrasing my searches right, could this question be deleted please?

  Read the article

• Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

  - by Laurence Gonsalves

  I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

  Read the article

• Windows 7 restarts while being idle

  - by Ondrej Slinták

  My Windows 7 almost always restarts when I keep it idle for ~20-30mins. It happened randomly before, but lately, if I leave the computer I can be sure it's gonna restart after those 30mins. It never happens when I play games or work tho, just when it's idle. It's a fresh install of Windows 7 64bit. I had also problems while installing it, it always crashed while finalizing the install and I had to reinstall again. Eventually it installed on 3rd or 4th try after I deleted all of my partitions and added them again. I thought it might have been a hardware problem, but temperatures seem to be okay and I have no idea how to track what might have been causing it. Any ideas? I'm running Windows 7 64bit on: Gigabyte EX58-UD4P Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz NVIDIA GeForce GTX 260 6GB of DDR3 1066Mhz RAM WDC WD1001FALS-00J7B0 1TB SATA II I have a very bad feeling it might be something with HDD and its compatibility with Windows 7 as I haven't had those problems for 1 year while I had Vista. Edit: I checked Event Viewer critical errors from this night. PC restarted first time at 11:12pm, then at 3:06am and since then every ~20min until I came back to it. Error message is: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Source: Kernel-Power

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• Cannot log into Windows XP Embedded after changing computer name

  - by bignis

  Hi everyone, I purchased a tablet pc running Windows XP Embedded. The tablet was used in a medical clinic on a domain. For illustrative purposes, say the computer name was "COMPLEXCOMPUTERNAME". There was an administrator account, so I changed the password on account "COMPLEXCOMPUTERNAME\Administrator" to a blank password. I logged out and logged in successfully with the blank administrator password when the log-in dialog said "Log in to COMPLEXCOMPUTERNAME (this computer)". Next I renamed the computer from COMPLEXCOMPUTERNAME to SIMPLECOMPUTERNAME, which required a reboot. I did so, and I can't log in anymore. The log in screen still just says "Log in to COMPLEXCOMPUTERNAME (this computer)", but the account "COMPLEXCOMPUTERNAME\Administrator" no longer works. I suspect that this is because the computer has been renamed to SIMPLECOMPUTERNAME and it can no longer find the account. The "Log in to" dropdown can't be typed in, so I can't change the computer name Windows is trying to log into. I fear that I'm stuck. Is there a way I can get Windows to log into the computer name that I chose? Thanks! -Mike

  Read the article

• Debian, How to convert filesystem from ISO-8859-1 into UTF-8?

  - by Johan

  I have a old pc that is running Debian stable, that is in need of a upgrade. The problem is that it is using latin1 (ISO-8859-1) for everything, and since the rest of the world has moved to UTF-8 I plan to convert this computer as well. And for this question I will focus in on the files that are served with Samba, and some has some latin1 characters in the filenames (like åäö). Now my plan is to move all data of this old computer onto and a brand new one that is running Debian stable (but with UTF-8). Does anybody have a good idea? Thanks Johan Note: later I plan to use iconv to convert the content of some files with something like this: iconv --from-code=ISO-8859-1 --to-code=UTF-8 iso.txt > utf.txt However I don't know of a good way to convert the filesystem it self. Note: Normally I usaly just scp from one computer to the next, but then I end up with latin1 characters in the utf-8 filesystem... Update: Did a small test round with a hand full of files (with funny chars) in the filenames, and that seemed like it could work. convmv -r -f ISO-8859-1 -t UTF-8 * So it was only to execute with the --notest convmv -r -f ISO-8859-1 -t UTF-8 --notest * Nothing more to it.

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• Only half of RAM is recognized by BIOS

  - by Rick Crawford

  I got a Gigabyte GA-P35-DS3 mainboard. Some time ago I noticed that Windows only showed 2GB instead of 4GB. I don't know exactly what caused it anyway. I tried putting in each of the 4 x 1GB RAM modules one by one, and tried every slot one by one, until every stick and slot worked. However, then I tried adding one more at a time, and it kept showing 1GB, until I put in all 4, where it only showed 2 GB instead of 4 (in BIOS and windows 7 64bit). I tried replacing the BIOS battery since I've read that low battery could cause it. It didn't help though. I also bought 4GB new RAM (yes, it's supported, I checked it), and it's still the same, it only shows 2GB (or 3GB, when I put in 4 of the new and 2 of the old). I also did the latest BIOS update, and used default BIOS settings, but nothing of that helped. When my PC boots it shows "RAM modules used 2 and 3", when 4 sticks are in - or "0 and 1", when only 2 are in.

  Read the article

• How do I fix a super slow MacBook?

  - by MakingScienceFictionFact

  I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

  Read the article

• Home Sharing and Remote on iTunes causing firewall nags

  - by BoltClock

  It seems that enabling Home Sharing and/or hooking up my iPhone's Remote to iTunes causes Mac OS X Snow Leopard's firewall to freak out and keep nagging every time I launch iTunes to ask if I'd like it to accept incoming connections. If I turn off Home Sharing and forget all Remotes, the nag dialog no longer comes up. I could also disable the firewall, but I think that's a silly thing to do. iTunes is already in the firewall whitelist, so the only thing I know that could cause Mac OS X to nag is a bad application bundle code signature. I checked with this Terminal command: $ codesign -vvv /Applications/iTunes.app/ And sure enough, this is what it outputs: /Applications/iTunes.app/: a sealed resource is missing or invalid /Applications/iTunes.app/Contents/Resources/English.lproj/AutofillSettings.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/iTunesDJSettings.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/MobilePhonePrefs.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/MobilePhoneSetup.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/UniversalAccess.nib/objects.xib: resource added I've tried reinstalling iTunes as suggested by this answer, but Mac OS X still nags about incoming connections and the exact same output is generated when I run the above command again. On my PC, Windows Firewall has never nagged whenever I turn on Home Sharing and hook up Remote on my iPhone. Both computers use iTunes 9.2.1. My Mac runs Mac OS X 10.6.4. Is there anything special I need to do that I might have missed? Or how do I resolve the issue? EDIT: I've updated to iTunes 10, but the nags on my Mac are still there and only go away if I turn off Home Sharing and Remote. EDIT 2: I've updated to Remote 2.0 on my iPhone, but the firewall nags are persisting. Has anyone else had this firewall issue at all?

  Read the article

• Get Internal IP Address From DHCP Hostname

  - by ell

  I would like to try and get an internal ip address of one of the computers on my network. The reason for this is I have a little home server box downstairs but every time I want to SSH into it I have to open my router configuration and go on the DHCP client table and look at the IP address. For example I would like to be able to go ssh ell-sever instead of ssh 192.168.1.105 or whatever it happens to be. My network configuration is like so: Router downstairs that is connected to the Internet and is running a DHCP server My server computer (ell-server) is a headless pc connected to the router via ethernet cable. Running Ubuntu 11.04 Server Edition My laptop upstairs (ell-laptop) that is running Ubuntu 11.10 Desktop Edition connected wirelessly Other (irrelevant) computers - 2 x Windows XP, 1 x Xubuntu - all connected with cables. (It seemed to me the method of connection isn't useful information but I put it in anyway - just in case. If I have missed any information please tell me) Do I have to run a DNS server on one of my computers? If so which one? And does that mean I will have to run a DDNS client on each computer? Thanks in advance, ell.

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• Can I still restore partition table?

  - by Johannes Lund

  Once I was going to resize partitions on my Mac HD from Bootcamp. I changed my mind and was going to quit, but apparently I hit a button, which made every single mac partion dissapear, and windows 7 refused to restart and be reinstalled. The 1 TB large HD consists of 3 partions, I believe. Since I can't see their actual size (except bootcamp), this is how I recall it. Macintosh HD about 500GB (Somewhere around 700GB according to disk utillity, but 500 according to Finder, and 500GB was all I could access.) Lion Recovery disk Bootcamp 293.36 GB To fix this I connected my mac via target disk mode to a pc and ran TestDisk. However this is the results: Since I Don't have 10 reputation I cant post the image showing the testdisk results, so I post a link instead hoping it is ok. The two mac partitions' sizes are completely wrong, and BOOTCAMP isn't showing. I tested using disk utilities from the snow leopard dvd. There there is one 293.36 GB Mac OS Extended partition. Before I had the firewire cable for target disk mode I tried reinstalling windows. Without success I tried again formating BOOTCAMP. Was that a bad thing to do? Could it have overwritten data from Macintosh HD? Unfortunately I have no backup. I could bring it to some kind of computer repair firm though.

  Read the article

• Microsoft Home Use Program - use more than one computer

  - by kristof

  I purchased a copy of MS Office through Microsoft Home Use Program (HUP) It basically allows you get a very cheap copy for home use if your employer owns the licence. My question is: Can I install it on more than one PC/laptop at home? I could not find anything in FAQ Thank you EDIT I was installing Office 2010 I found the following in the EULA: MICROSOFT SOFTWARE LICENSE TERMS .... 2 INSTALLATION AND USE RIGHTS. a. One Copy per Device. You may install one copy of the software on one device. That device is the “licensed device.” b. Licensed Device. You may only use one copy of the software on the licensed device at a time. c. Portable Device. You may install another copy of the software on a portable device for use by the single primary user of the licensed device. Here is the full copy of the licence

  Read the article

• Should I partition a 1TB Hard Disk whose primary use is media storage?

  - by Senthil

  I am going to get a 1TB hard disk. I will be storing 1080p or 720p movies, high-bitrate music and pictures in it. I use my PC 90% of the time only to play/listen/see those. I am running out of space in my current HD so I am getting another one. My specs are 2.7GHz Dual Core, 512MB GeForce 9400GT, 2GB DDR2 RAM and all the proper matroska codecs/players. I guess that is enough to play 1080p movies withough a glitch, given an ideal hard disk. I've read about proper partitioning giving performance improvement etc.. I don't want my hard disk to be the bottleneck. Can someone tell me whether I should partition my 1TB hard disk into many drives? If I should, what is the ideal size of each partition? Smooth playing of movies is very important to me. Once I start filling up the disk, there is no turning back. So I want to get it right before I start. Thanks.

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• Enabling NAT forwarding using a second WAN interface and a second gateway on ubuntu

  - by nixnotwin

  I have 3 interfaces: eth0 192.168.0.50/24 eth1 10.0.0.200/24 eth2 225.228.123.211 The default gateway is 192.168.0.1 which I want to keep as it is in the changes I want to make. I want to masquerade eth1 10.0.0.200/24 and enable NAT forwarding to eth2. So I have done this: ip route add 225.228.123.208/29 dev eth2 src 225.228.123.211 table t1 ip route add default via 225.228.123.209 dev eth2 table t1 ip rule add from 225.228.123.211 table t1 ip rule add to 225.228.123.211 table t1 Now I can receive ping replies from any internet host if I did: ping -I eth2 8.8.8.8 To enable NAT forwarding I did this: sudo iptables -A FORWARD -o eth2 -i eth1 -s 10.0.0.0/24 -m conntrack --ctstate NEW -j ACCEPT sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE But it isn't working. To test I used a client pc and put it on 10.0.0.0/24 network and gateway was set as 10.0.0.200. I want to have 192.168.0.1 as default gateway. And the traffic that comes in via eth1 10.0.0.200/24 should be forwarded to eth2 225.228.123.211. I have enabled forwarding on ubuntua also.

  Read the article

• LogMeIn style remote access to NAS drive

  - by Mere Development

  I've been asked to setup some remote access to a NAS drive. The NAS drive will sit on a VLAN inside a network that uses a Cisco 891 IS router as gateway. The charity have no SSL-VPN licenses for the Cisco. At present there are no open ports or services on the Cisco itself and ideally we would like to keep it that way for a while, hence the request for a LogMeIn style service that's initiated from inside. We need multiple user access, about 10 max. Using LogMeIn on a machine connected to the NAS would only provide screen sharing I believe, and no concurrent connections (could be wrong?) The end users need to be able to read and write files to the NAS from Mac's and PC's around the globe. Read-only access from Mobile devices would be a bonus but not absolutely necessary. This is for a charity, non-commercial, but they are willing to spend if necessary. Cisco config knowledge is at a minimum so if I can avoid upsetting that delicate device I'll be happy :) Anyone have any clever ideas? I can provide more information on request. Thanks, Ben

  Read the article

• Why can't I connect to my router's config page with Windows 7?

  - by user17940

  I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

  Read the article

• Android webbrowser returns code 500 for webpage on Nginx webserver

  - by Paxxil

  Hey! I've come to a very weird behavior of a web browser on android mobile phone (I've tried HTC Wildfire and HTC Desire phones). I have a web server with Nginx v0.8.54. When i try to open a web page on the phone it shows me error: The requested item could not be loaded! (Status code: 500) BUT it only happens when I am requesting page through Mobile network. On Wifi it works just fine .... but there is more .... if I stop Nginx and start Apache web server it works just fine on both Mobile network and wifi. I've also tried other mobile network and it is the same behavior. Some server stats: Firewall is OFF Selinux is OFF the web page (using Nginx web server) opens normally on any other browser (IE, FF, Opera, Chrome, Safari) on the laptop or PC Nothing in nginx error.log This is the only entry in access.log when the page is requested: xxx.xxx.xxx.xxx - - [17/Mar/2011:11:19:49 -0500] 200 "GET / HTTP/1.1" 27405 "-" "Mozilla/5.0 (Linux; U; Android 2.2; en-gb; Desire_A8181 Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" "-" index.html has only "Hello World" string in it. There is no fishy javascript or anything else. .... but there is even more.... if i open the same page on another server, with the same Nginx build, with the same server and web server configuration.... it opens just fine. if anyone has any idea on what may be going on, i would really appreciate it if you let me know. Thanks! EDIT: i forgot to mention that page opens OK on Iphone and Nokia

  Read the article

• Windows: How to make programs think they're not running in a terminal server session?

  - by sinni800

  I am using the program "SoftXPand 2011 Duo" by Miniframe on my Windows 7 PC. It makes two workstations out of one computer. It uses the terminal services built into Windows to create the additional session. I use two screens, two keyboards and two mice to create this "illusion" of two computers. It works quite well and I can even play two different 3D games on the two screens attached to this single machine (using a Radeon HD5770 and a Core i5 2500k with 8 Gbytes RAM). There are a few downsides to this. I just found about one that is hidden on the first look. The sessions you are in (even on the first workstation) will identify as a terminal server session! Now some programs will run with limited effects (graphical), and some won't run at all. This also resulted in some games not running at all. They just say "Cannot be run in a terminal server session" and exit. I have already proven that top modern games (DirectX 10, 11) run just as good as on the same machine without SoftXPand, so this is a pretty artificial limitation! So, can I somehow hack my current session so it doesn't look like a terminal server session anymore? I. E. #include <windows.h> #pragma comment(lib, "user32.lib") BOOL IsRemoteSession(void) { return GetSystemMetrics( SM_REMOTESESSION ); } Will return FALSE? (Not a programming question! Just an example how programs detect if they're in a terminal server session!)

  Read the article

• Do you really need cable management for a cabinet with just switches and patch panels?

  - by ObligatoryMoniker

  We are about to start wiring out a building expansion and our vendor has laid out the racks in the following configuration: Option 1 1U Fiber patch panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 2U 48 port Patch Panel 2U Cable Manager 1U 48 port Switch 2U Cable Manager 1U 48 port Switch Total = 15U All the patch panels would be connected to the switches with 1ft+ cables fed through cable management. What I am considering instead is: Option 2 1U Fiber patch panel 1U 24 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel 1U 48 port Switch 2U 48 port Patch Panel Total = 8U All of the patch panels would be connected to the switches with .5 ft cables directly on their face with the top 24 ports of each switch patched to the patch panel above it and the bottom 24 ports of each switch patched to the patch panel beneath it which would not require any cable management. If I go with option 2 it save all of the space used by cable management and allows us to keep adding on switches and patch panels at the end without having to re-cable all of the patch panels above. Our vendor has indicated that this is not best practice and that .5ft cables will introduce cross talk. I could understand that being the case if we were connecting the .5 ft cable directly into another switch but we are connecting it to a patch panel that likely has another 150 ft cable run from the back of the patch panel out to the port in the building in which case the real resulting cable is 150.5 ft at minimum before even connecting it to a PC. It seems like it makes much more sense to go with option 2. It is easier to expand, saves space, and saves money on cabling and cable management. Does this kind of configuration make sense or is there a legitimate reason to choose Option 1 over Option 2?

  Read the article

• Shut Out of XP - No Admin Password or CDR

  - by ashes999

  I inherited an old WinXP/Linux dual-boot machine from the stoneage. Because it has Linux, the regular boot process is replaced with the Fedora boot loader; I cannot, therefore, press F8 strategically to tell my PC to boot from CD. Even if I could, it's a moot point; the CDR doesn't seem to recognize any CDs. To make things worse, there's no option to network boot. The original user is probably long gone; I don't know the password for any of the Administrator group users. I can login using my corp account, but that's unprivileged on this machine. Since I'm not an admin, I can't do crazy things, like looking at boot.ini. Or deleting files. I only have 500MB free on my C drive. I'm pretty sure I can't boot from a USB, since I didn't see any settings for this in my BIOS. How can I get admin access for my user? Edit: Things I've tried: Boot from CD (CD not recognized) Launch CD from XP (CD not recognized) Install Daemon Tools Lite so I can install from an ISO -- don't have admin privileges XP password recovery tool -- requires admin privileges Adding an admin user -- no access to Control Panel Users since I'm not an admin Logging in as both the admin users on the system (trying some standard passwords) Using Fedora to chntpw (the Fedora version installed is ancient -- 2.7)

  Read the article

• Filesharing mac 10.6 with windows vista

  - by adam

  Ive followed all the tutorials on the net to no avail. I can see my vista pc in finder on the mac but when I click on it tries to connect but fails. The same is true from vista, it can see the mac but i cant connect. Wont even offer a login box. So I tried to troubleshoot by using a 3rd computer with xp. It joined the network and can access both the mac and vista on the same workgroup. Mac sees it and it shows under finder but i cant access it by clicking on the icon i have to access by using the ip of the xp machine...strange. Ive turned off all my firewalls. The fact that xp can connnet to the others and vice versa boggles my mind why vista and mac cant connect directly. Oh and pings indicates the same. I.e. xp has no problem but mac to vista and vice versa fails. Can anyone help.

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >