Search Results

Search found 14111 results on 565 pages for 'virtual machines'.

Page 311/565 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Performance difference between MacBook Pro (2.8 GHz) vs Air (1.7 GHz)?

  - by jonathanconway

  I'm comparing these two Apple laptops: MacBook Pro (13", 2011 model): 2.8GHz dual-core Intel Core i7 processor with 4MB shared L3 cache 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory on 2.4GHz configuration MacBook Air (13", 2011 model): 1.7GHz dual-core Intel Core i5 with 3MB shared L3 cache 4GB of 1333MHz DDR3 onboard memory Intel HD Graphics 3000 processor with 384MB of DDR3 SDRAM shared with main memory There's definitely a gap between them in terms of CPU speed and graphics, but what practical difference would this make on a day-to-day basis? On the one hand, I love the sleek, thin appearance of the Air. On the other hand, I don't want a machine that's going to be dog-slow when doing tasks such as running Virtual Machines, dual-booting to Windows and running multiple instances of Visual Studio, and maybe some light gaming. Is there going to be a major difference that makes the MacBook Pro a more attractive purchase?

  Read the article

• Does using a single cable to connect two switches create a bottleneck?

  - by Nick

  I realise this may be a stupid question for some, but it's something I've always wondered about. Let's say we have two gigabit switches and all of the devices on the network are also gigabit. If 10 computers connected to switch A need to transfer large amounts of data to a server on Switch B (at the same time), is the maximum transfer speed of each connection limited by the bandwidth of the connection between the two switches? In other words, would each computer only be able to transfer at a speed of one gigabit divided by the 10 machines trying to use the "bridge" between switches? If so, are there any workarounds so that every device can use it's maximum speed from point to point?

  Read the article

• Ultra Low Latency Linux Distribution or Kernel

  - by Zanlor

  I'd like to know if there are any linux distributions that are focused on low latency networking. The area I'm working in is algorithmic trading, and extremely low latency comms between machines is a must. The current h/w we're using is 10g ethernet, we're looking into things like infiniband RDMA and Voltaire VMA I've googled around, and have only been able to find tidbtits of kernel patches, command line options and hardware suggestions. I'm looking for a complete solution, specially built kernel, kernel bypass features, essentially all the goodies rolled up into one package - does such a thing even exist? I ask as a lot of this stuff seems to be a black art, people keep secret what they know works etc.

  Read the article

• Ultra Low Latency Linux Distribution or Kernel

  - by Zanler

  I'd like to know if there are any linux distributions that are focused on low latency networking. The area I'm working in is algorithmic trading, and extremely low latency comms between machines is a must. The current h/w we're using is 10g ethernet, we're looking into things like infiniband RDMA and Voltaire VMA I've googled around, and have only been able to find tidbtits of kernel patches, command line options and hardware suggestions. I'm looking for a complete solution, specially built kernel, kernel bypass features, essentially all the goodies rolled up into one package - does such a thing even exist? I ask as a lot of this stuff seems to be a black art, people keep secret what they know works etc.

  Read the article

• How to debug on a real device (using Eclipse/ADT)

  - by jgauffin

  I'm trying to figure out how to debug applications directly on my phone (HTC Desire). I've installed the USB driver that came with the phone and the phone is listed when using "adb devices". How do I configure eclipse/ADT to launch on the phone instead of launching the emulator/virtual device?

  Read the article

• SharePoint 2010 not seeing Active Directory users

  - by user117927

  I'm pretty new to Active Directory and SharePoint but I was given to understand they are supposed to play well together. Now I have successfully set up AD with multiple user accounts that work on any member computer. I have also successfully installed SharePoint 2010 Server on an AD machine. Both the AD server and SharePoint servers are on separate machines (VMs running on ESXi to be precise). I can only log on with user accounts I create on the local server. Furthermore the user browser thing for adding users will only see local users. I've followed the advice here http://technet.microsoft.com/en-us/library/cc262350.aspx#section2 for Classic authentication and also NTLM claims based authentication but to no avail. Is there something fundamental I am getting wrong here? I'd be really thankful for any help you can lend me; I've been googling and scratching my head for a couple of days now. P

  Read the article

• OpenVPN Client timing out

  - by Austin

  I recently installed OpenVPN on my Ubuntu VPS. Whenenver I try to connect to it, I can establish a connection just fine. However, everything I try to connect to times out. If I try to ping something, it will resolve the IP, but will time out after resolving the IP. (So DNS Server seems to be working correctly) My server.conf has this relevant information (At least I think it's relevant. I'm not sure if you need more or not) # Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I've tried on multiple computers by the way. The same result on all of them. What could be wrong? Thanks in advance, and if you need other information I'll gladly post it. Information for new comments root@vps:~# iptables -L -n -v Chain INPUT (policy ACCEPT 862K packets, 51M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 3 packets, 382 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 4641 298K ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 1671K packets, 2378M bytes) pkts bytes target prot opt in out source destination And root@vps:~# iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 17937 packets, 2013K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 8975 packets, 562K bytes) pkts bytes target prot opt in out source destination 1579 103K SNAT all -- * * 10.8.0.0/24 0.0.0.0/0 to:SERVERIP Chain OUTPUT (policy ACCEPT 8972 packets, 562K bytes) pkts bytes target prot opt in out source destination

  Read the article

• Fedora Installation with software repository in DVD does not work

  - by Raks

  I bought a new assembled PC with processor as Core-i3(2120) and Intel H61 motherboard and was trying to install Fedora 16 from a DVD. This DVD contains all the packages so that installation does not require to download packages from internet. I have used this DVD to install Fedora 16 offline many a times though in machines with different hardware configuration. But in this new machine when the installation reaches the stage wherein it asks for Software repository selection I select CD/DVD but the system fails to read the media and throws up an error that it cannot detect the media. THe LED in the DVD writer also indicate that the DVD is not being read. Now there is neither a problem with the DVD or the DVD drive because the installation started from the DVD itself. So what could the problem be, anything in the BIOS that is causing the problem, Is there any way I could utilize the packages already existing in the CD so that I save downloading the packages from DVD

  Read the article

• rsync error unexplained error (code 255) at io.c

  - by kabeer

  I was using a script to perform rsync in sudo crontab. The script does a 2-way rsync (from serverA to serverB and reverse). After i reboot both the server machines, the rsync is not working in sudo crontab. I also setup a new cronjob and it fails, The error is: rsync error: unexplained error (code 255) at io.c(600) [sender=3.0.6] rsync: connection unexpectedly closed (0 bytes received so far) [receiver] However, when run from terminal, the rync script works as expected without issues. please help.

  Read the article

• How to set the hostname according to the DNS name on Ubuntu 9.10?

  - by tangens

  Motivation I have to manage a lot of virtual machines that I create by copying a template (VmWare image). Problem Now I have the problem that in the template the file /etc/hostname contains a given name that I want to change for each copy of the template. Facts The network interface is configured by DHCP. DNS entries exist. The system is a Ubuntu 9.10 server. Question I wonder if I can configure the template so that on startup it sets its hostname according to its DNS name. I could create an init script that parses the IP address, makes a DNS lookup and sets the hostname accordingly. But is there an easier way?

  Read the article

• Windows 2008R2 two node failover cluster creation fails

  - by Francois Wolmarans

  We have just installed two Windows 2008R2 Enterprise machines with identical hardware. When running the cluster validation everything is ok. When creating the cluster it fails with the following error: An error occurred while creating the cluster. An error occurred creating cluster 'CLUSTER04'. The parameter is incorrect The logfile on the first node where we are running our config from, does not show any errors. On the second node we get: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. I've double checked and all communication between the servers are fine. Even when creating a one node cluster it gives the error. There are other failover clusters we have setup without any issues.

  Read the article

• Why do password entries over ssh take so long?

  - by Dean

  When I'm ssh'd into my server, any time I enter my password, there's a 40 second delay before the server responds. This occurs when logging in, as well as whenever I run a command via sudo. The delay does not happen when I run su and enter my password however. Using the -v flag for ssh doesn't show anything during this time. Looking at Wireshark, all traffic between the two machines stops while this is happening. Any idea what's happening, or advice on how to investigate this? The server is running Debian squeeze (6.0.4)

  Read the article

• How is my ISP DNS hijacking AFTER all these precautions?

  - by user973917

  In IE9 when I search for anything my ISP hijacks google search and I get this result. To add complication to this I've already changed the default DNS servers (OpenDNS) months ago. This only happens in IE9; even after machine reboots and cache flushing. I even have my router (dd-wrt) intercepting all requests for DNS and I am still getting this result. I have all extensions disabled and there are no toolbars. This is IE9 from M$. This is not malware; it happens all machines with IE installed (even IE7/8).

  Read the article

• Client/server application RPC connection gets disconnected very frequently

  - by Chris Thompson

  I have a client/server application that uses RPC for the client to communicate with the server. Fairly regularly, I get an event in the Application log that the RPC connection was disconnected: Client callback failed ((0x80010108) ) I have the Windows Firewall disabled on both machines. I've even run the client on a second computer with a clean Windows XP install without any group policies. This has been going on for a long time and no one has been able to figure out why it's happening. The same client/server app works fine at other client locations. Any thoughts?

  Read the article

• Run application or script on Windows RDC connection

  - by NickLarsen

  I checked this thread, but it did not solve my exact problem. I need to run a script on when a connection is made across my network using windows remote desktop connection. The thread listed above works for the initial login, however, if I don't log out (which is necessary for some processes running on my network), then it wont run the script again the next time someone connects to the system using remote desktop connection. Previously we were using pcAnywhere to achieve this, however after running into some graphical issues with pcAnywhere, we have decided to move away from it to RDC. For a little more information, we need to have an email sent out anytime a connection is made to particular machines. The login name will always be the same for those systems and we do not log off when closing the connection.

  Read the article

• Linksys WRT54Gx as Repeater Bridge

  - by Robert Koritnik

  I have a Linksys WRT54Gx router with DD-WRT software working fine. But. Is it possible to use it as a Repeater Bridge when the host router isn't configured to be in the default 192.168.1.1 subnet? I've set everything from these instructions. I've also tried setting repeater router's IP address to be inside host's subnet, setting Gateway + DNS IP addresses... But It still didn't work. Client machines connecting to second router (my Linksys) were configured to use DHCP and also static IPs within host's subnet. Nothing worked. Can anyone tell me how to configure it to make it work?

  Read the article

• Audit Windows Server/Desktop Product Key usage

  - by neildeadman

  The company I work for has a fairly big domain of Windows Desktops and Servers. We also have standalone servers that are remote to our site but we have direct access to. We need to audit our license usage across all Windows machines (including some VMs). I have tried a few products downloaded, but the key returned is not the one used during installation. I have one product that gives the last 5 characters correctly but needs to be installed so its not really suitable. I also have tried some PowerShell scripts one of which is here Ideally I am looking for one that can be used over a network and if possible can audit Office keys too. I've just tried Jelly Bean and some other product key tools that all return BBBBB-BBBBB-BBBBB-BBBB-BBBBB as the product key.

  Read the article

• Open source alternative for Canonical Landscape? [on hold]

  - by netvope

  From Canonical: Landscape is an easy-to-use systems management and monitoring service that enables you to manage multiple Ubuntu machines as easily as one through a simple Web-based interface. However, Landscape is not free. The RedHat counterpart Satellite has a free version called Spacewalk, but it doesn't work on Ubuntu. (There is an attempt to port Spacewalk to Debian, but it doesn't look like it's stable yet.) Are there any open source alternative to Landscape? Better yet, are there any Spacewalk-like software that works for both RedHat-based and Debian-based systems?

  Read the article

• Cannot access Windows 7 share from Windows XP

  - by artfulrobot

  I have a new Windows 7 machine named PAP44 in the PAP workgroup. The networking is set to "Work" mode for the wired LAN. I have a couple of users and I've shared a folder and set it so both users can read/write. Confusingly for me, rather than sharing just that folder (as I'm used to with older versions of Windows) it appears to be sharing a path (\\pap44\users\...\myFolder) From another machine on the LAN, running XP, when I go to \\PAP44\Users I'm asked for a username and password, but neither of the usernames+passwords work. It just jumps back to the username and password dialogue, except that the username I entered gets prefixed with PAP44\ My end goal is to get my Debian/Ubuntu machines to be able to access this share, but first of all I thought I'd try to get it working in Windows, after all, that's supposed to be easy! Is there another step? (PS. I am not a "hit and run" case!)

  Read the article

• Failures when copying between two external drives on the same controller

  - by Krzysztof Kosinski

  I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

  Read the article

• Sporadic '.Xauthority not writable, changes will be ignored' going from OSX -> Linux

  - by Kamil Kisiel

  Every now and then when users SSH from their OS X (Snow Leopard) workstation to one of our Linux hosts they receive the message: /usr/bin/xauth: ~/.Xauthority not writable, changes will be ignored Of course, their X forwarded applications will not work at this point. However, if they log out and log right back in again they do not get the message and everything works as expected. On their Mac they get their home directory via AFP. The Linux machines get it via NFS. Any ideas on what could be going on here?

  Read the article

• Navigating nested RDP sessions

  - by U62

  Often at work I have to RDP into one server in order to get to another. And no, there's no chance of the network getting sorted out such that I can connect to all machines directly :) I'm wondering if anyone has any good tips/tricks for working in this scenario. I tend to open RDP sessions full screen, so the way to get back to my desktop is to click the minimize or restore buttons on the toolbar the drops down from the top of the screen when you are using a full-screen RDP session. The problem is that when you log into A and then from there log into B, A's toolbar covers B's, so there's no easy way to get back to the desktop of A without logging out of B. At least as far as I can see. Maybe there's a keyboard shortcut that can pop you out of the innermost session? At the moment, I try to not use full screen mode on the nested session, but apart from having to remember to set that before I connect, it reduces the workspace and is something I'd like to avoid.

  Read the article

• hosting environment for delivering FLVs

  - by Gotys

  What would be the ideal hardware setup for pushing lots of bandwith on a tube site? We have ever-expanding cloud storage where users upload the movies, then we have these web-delivery machines which cache the FLV files on its local harddrives and deliver them to users. Each cache machine can deliver 1200 mbits/s , if it has SAS 8 harddrives. Such a cache machine costs us $550/month for 8x160gb -- so each machine can cache only 160GB at any given time. If we want to cache more then 160gb , we need to add another machine..another $550/month..etc. This is very un-economical so I am wondering if we have any experts here who can figure out a better setup. I've been looking into "gluster FS", but I am not sure if this thing can push a lot of bandwith. Any ideas highly appreciated. Thank you!

  Read the article

• Eclipse doesn't build

  - by Christian

  A previously working Ecplise now gives me the error Java Virtual Machine Launcher Could not find main class: testing2. Program will exist. testing2 is my class and a source file exists but Ecplise doesn't seem to build the .class file. Maybe I hit the wrong hotkey and changed accidently some setting?

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >