Search Results

Search found 10634 results on 426 pages for 'pass'.

Page 312/426 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

  • Apache 2.4 with PHP-FPM

    - by tubaguy50035
    I'm trying to setup Apache 2.4 with PHP-FPM 5.4 using the new modules with Apache 2.4. The following is what I have currently in my virtual host file: <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www #Directory permissions <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Require all granted </Directory> CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> I have PHP-FPM running using Unix sockets with a sock file located at /var/run/php5-fpm.sock. How do I proxy my requests to this sock file? I've seen some sites say to use ProxyPassMatch and others are saying Rewrite Rule. Are there pros or cons on either side? Also, most sites I'm seeing are showing ProxyPassMatch with a regex to only pass .php files. Could I also send it .html files? For whatever reason, we have a ton of PHP inside .html files. Edit: As noted in the comments, it looks like mod_proxy_fcgi doesn't support Unix sockets. Is there another module I should be using?

    Read the article

  • TLS_REQCERT and PHP with LDAPS

    - by John
    Problem: Secure LDAP queries via command-line and PHP to an AD domain controller with a self-signed certificate. Background: I am working on a project where I need to enable LDAP look-ups from a PHP web application to a MS AD domain controller that is using a self-signed certificate. This self-signed certificate is also using a domain name that is not a FQDN - think of something like people.campus as the domain name. The web application would take the user's credentials and pass them on to the AD domain controller to verify if the credntials are a match or not. This seems simple, but I am having problems trying to get PHP and the self-signed certificate to work. Some people have suggested that I changed the TLS_REQCERT variable from "request" to "never" within the OpenLDAP configuration. I am concerned that this might have larger implications such as a man-in-the-middle attack and I am not comfortable changing this setting to never. I have also read some places online where one can take a certificate and place it as a trusted source within the openldap configuration file. I am curious if that is something that I could do for the situation that I have? Can I, from the command line, obtain the self-signed certificate that the AD domain controller is using, save it to a file, and then have openldap use that file for the trust that it needs so that I do not need to adjust the variable from request to never? I do not have access to the AD domain controller and as a result cannot export the certificate. If there is a way to obtain the certificate from the command line, what commands do I need to use? Is there an alternate method of handling this issue that would be better in the long run? I have some CentOS servers and some Ubuntu servers that I am working with to try and get this going on. Thanks in advance for your help and ideas.

    Read the article

  • OpenBSD pf - implementing the equivalent of an iptables DNAT

    - by chutz
    The IP address of an internal service is going to change. We have an OpenBSD access point (ssh + autpf rules) where clients connect and open a connection to the internal IP. To give us more time to reconfigure all clients to use the new IP address, I thought we can implement the equivalent of a DNAT on the authpf box. Basically, I want to write a rule similar to this iptables rule which lets me ping both $OLD_IP and $NEW_IP. iptables -t nat -A OUTPUT -d $OLD_IP -j DNAT --to-dest $NEW_IP Our version of OpenBSD is 4.7, but we can upgrade if necessary. If this DNAT is not possible we can probably do a NAT on a firewall along the way. The closest I was able to accomplish on a test box is: pass out on em1 inet proto icmp from any to 10.68.31.99 nat-to 10.68.31.247 Unfortunately, pfctl -s state tells me that nat-to translates the source IP, while I need to translate the destination. $ sudo pfctl -s state all icmp 10.68.31.247:7263 (10.68.30.199:13437) -> 10.68.31.99:8 0:0 I also found lots of mentions about rules that start with rdr and include the -> symbol to express the translation, but it looks like this syntax has been obsoleted in 4.7 and I cannot get anything similar to work. Attempts to implement a rdr fail with a complaint that /etc/pf.conf:20: rdr-to can only be used inbound

    Read the article

  • nginx - proxy_pass is working - Apache isn't doing what it should...

    - by matthewsteiner
    So, I've got this in my nginx.conf: location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/example.com/public/; access_log off; expires 30d; } location / { proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } So anything that is a "static file" that exists will just be done with nginx. Otherwise, it should pass it off to Apache. Right now, static files are working correctly. However, if something is passed to apache and it's example.com or subdomain.example.com, apache just spits out the "Apache 2 Test Page" that you get if there's nothing there. Apache worked fine before, so I'm guessing it has to do with the way nginx is "asking". I'm not sure though. Any ideas?

    Read the article

  • Nginx deny doesn't work for folder files

    - by user195191
    I'm trying to restrict access to my site to allow only specific IPs and I've got the following problem: when I access www.example.com deny works perfectly, but when I try to access www.example.com/index.php it returns "Access denied" page AND php file is downloaded directly in browser without processing. I do want to deny access to all the files on the website for all IPs but mine. How should I do that? Here's the config I have: server { listen 80; server_name example.com; root /var/www/example; location / { index index.html index.php; ## Allow a static html file to be shown first try_files $uri $uri/ @handler; ## If missing pass the URI to front handler expires 30d; ## Assume all files are cachable allow my.public.ip; deny all; } location @handler { ## Common front handler rewrite / /index.php; } location ~ .php/ { ## Forward paths like /js/index.php/x.js to relevant handler rewrite ^(.*.php)/ $1 last; } location ~ .php$ { ## Execute PHP scripts if (!-e $request_filename) { rewrite / /index.php last; } ## Catch 404s that try_files miss expires off; ## Do not cache dynamic content fastcgi_pass 127.0.0.1:9001; fastcgi_param HTTPS $fastcgi_https; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; ## See /etc/nginx/fastcgi_params } }

    Read the article

  • Equivalent of scp -l bandwidth_cap for .ssh/config?

    - by Mark Bennett
    Short form: You can limit the bandwidth the scp uses with the -l switch, you pass a number that's in kbits/sec. I'd rather set this in my .ssh/config file for certain names machines. What's the equivalent named setting for -l ? I haven't been able to find it. Followup question: Generally, not sure how to map back and forth between ssh command line options and config names, short of doing Google searches or manually comparing man pages on a case by case basis. Is there a table that directly equates the two? Longer form of first question, with context: I've started using ssh config quite a bit, especially now that I need to go through a proxy and do lots of port mappings. I even define the same machine more than once depending on what type of tunneling I need. However, when uploading a large file, it's difficult to do anything else on my machine. Even though I have more download bandwidth than up, I think that scp saturates the link so even my small requests can't reach the Internet. There's a fix for this, using the -l bandwidth command line switch for scp. scp -l 1000 bigfile.zip titan: I'd like to use this in my config instead, so I'd create an additional named entry called "titan-upload" and I'd use that as the target whenever I upload. So instead of: scp bigfile.zip titan: I'd say: scp bigfile.zip titan-upload Or even set different caps depending on where I am: scp bigfile.zip titan-upload-from-home vs. scp bigfile.zip titan-upload-from-work I'm generally on Mac and Linux.

    Read the article

  • Wired to wireless bridge in Linux

    - by adrianmcmenamin
    I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

    Read the article

  • Git clone/pull across local network

    - by Tom Sarduy
    I'm trying to clone/pull a repository in another PC using Ubuntu Quantal. I have done this on Windows before but I don't know what is the problem on ubuntu. I tried these: git clone file:////pc-name/repo/repository.git git clone file:////192.168.100.18/repo/repository.git git clone file:////user:pass@pc-name/repo/repository.git git clone smb://c-pc/repo/repository.git git clone //192.168.100.18/repo/repository.git Always I got: Cloning into 'intranet'... fatal: '//c-pc/repo/repository.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly or fatal: repository '//192.168.100.18/repo/repository.git' does not exist More: The other PC has username and password Is not networking issue, I can access and ping it. I just installed git doing apt-get install git (dependencies installed) I'm running git from the terminal (I'm not using git-shell) What is causing this and how to fix this? Any help would be great! UPDATE I have cloned the repo on Windows using git clone //192.168.100.18/repo/intranet.git without problems. So, the repo is accessible and exist! Maybe the problem is due user credentials?

    Read the article

  • How to automate downloading files?

    - by Damon
    I got a book which had a pass to access digital versions of hi-res scans of much of the artwork in the book. Amazing! Unfortunately the presentation of all the these are 177 pages of 8 images each with links to zip files of jpgs. It is extremely tedious to browse, and I would love to be able to get all the files at once rather than sitting and clicking through each one separately. archive_bookname/index.1.htm - archive_bookname/index.177.htm each of those pages have 8 links each to the files linking to files such as <snip>/downloads/_Q6Q9265.jpg.zip, <snip>/downloads/_Q6Q7069.jpg.zip, <snip>/downloads/_Q6Q5354.jpg.zip. that don't quite go in order. I cannot get a directory listing of the parent /downloads/ folder. Also, the file is behind a login-wall, so doing a non-browser tool, might be difficult without knowing how to recreate the session info. I've looked into wget a little but I'm pretty confused and have no idea if it will help me with this. Any advice on how to tackle this? Can wget do this for me automatically?

    Read the article

  • dom0 enable IPv6 for guests

    - by user98651
    I am looking at deploying IPv6 to my virtual machines. Right now I have v6 working great on the dom0 using a 6in4 provided by Hurricane Electric as I do not have native v6. However, I would like to distribute some of the /48 I am receiving to the domUs (/64 per machine would be ideal, but I am open to your suggestions). Static configuration on the domU side is fine. All I want to accomplish is getting the traffic to pass through the dom0 to the domU. To say the least, I'm still trying to wrap my head around all the virtual interfaces and bridges Xen creates. Yes, I have Googled around for this a bit and have not found anything great. I tried using two "vif-route6" bash scripts with no luck (possibly due to my ignorance with Xen networking). I am still stuck (mainly in how to configure the dom0). I would like to imagine this problem is relatively easy to solve and I look forward to your suggestions and help! Edited post to clarify my end goal: getting IPv6 to domU guests. I am completely open to suggestions but am hoping for something other than setting up a tunnel for every guest.

    Read the article

  • Best Asp.net Hosting

    - by dotnetguts
    There are many asp.net web hosting companies which spends lot on advertisement and also gives you very cheaper rate, as low as $5, but when it comes to support they are simply hopeless. Everyone can you please pass your experience with your past hosting companies and suggest any good asp.net hosting company? Please consider following requirement factors 1) Asp.net 3.5 or 4.0 supported. 2) Url Rewriter support 3) GZip support (Dynamic through code) 4) Initial Setup support (If required) 5) SQL Server 2005 or 2008 6) Allow to access SQL Server DB using SQL Mgmt Studio 7) Environment supporting Backup and Restore of DB on my own, without involving tech support team 8) Full Text Search support 9) FTP support 10) I can able to send atleast 500 Emails daily. 11) 99.9% Up Time (No matter all web hosting say they have 99.9% Up Time, but its not true). 12) Alert Email to be sent when they do any maintenance or during downtime. 13) Hosting Price should be reasonable. Incase you feel i am missing something please add to the list. Can anyone suggest good webhosting company based on above factors?

    Read the article

  • SSLVerifyClient optional with location-based exceptions

    - by Ian Dunn
    I have a site that requires authentication in order to access certain directories, but not others. (The "directories" are really just rewrite rules that all pass through /index.php) In order to authenticate, the user can either login with a standard username/password, or submit a client-side x509 certificate. So, Apache's vhost conf looks something like this: SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient none SSLVerifyDepth 1 <LocationMatch "/(foo-one|foo-two|foo-three)"> SSLVerifyClient optional </LocationMatch> That works fine, but then large file uploads fail because of the behavior documented in bug 12355. The workaround for that is to set SSLVerifyClient require (or optional) as the default, so now the conf looks like this SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient optional SSLVerifyDepth 1 <LocationMatch "/(bar-one|bar-two|bar-three)"> SSLVerifyClient none </LocationMatch> That fixes the upload problem, but the SSLVerifyClient none doesn't work for bar-one, bar-two, etc. Those directories are still prompted to present a certificate. Additionally, I also need the root URL to accessible without the user being prompted for a certificate. I'm afraid that will cancel out the workaround, though.

    Read the article

  • A little guidance setting up FTP server authentication on Windows Server 2008 R2 standard?

    - by Ropstah
    I have a (clean) server running Windows Server 2008 R2 standard. I would just like to use it for serving a website and a FTP server through IIS. IIS is installed and serves my website propery. I have now added a FTP site but when I try to logon using my user/pass i get the following error: 530 User cannot login From this article (http://support.microsoft.com/kb/200475) I understand that these four causes can be pointed out: The Allow only anonymous connections security setting has been turned on in the Microsoft Management Console (MMC). Not the case The username does not have the Log on locally permission in User Manager. The user is in the Users group, however I'm not able to logon through RDP. I tried configuring this by following this article through GPMC however this only works when I'm logged in as a domain user on a domain controller which I'm not: I'm logged in as administrator The username does not have the Access this computer from the network permission in User Manager. Not sure what this implies...? The Domain Name was not specified together with the username (in the form of DOMAIN\username). Tried adding the server name: server\username, not working... I am an absolute server noob and I'd just like to be able to connect through FTP... Any guidance is highly appreciated!

    Read the article

  • Snapshotting single disk of running Hyper-V VM

    - by modelnine
    I'm currently somewhat at a loss of how to create a snapshot of a single virtual hard-disk of a running Hyper-V VM. Generally, creating a differential disk while a server is shut down is no problem (i.e., call the new-vhd cmdlet and pass a ParentPath, then update the VHD-binding of the respective VM-device), but while the host is running, all I can find is checkpointing the VM as a whole (which creates snapshots of all attached disks), and leaves the VM-state in a form which isn't easily processable by external tools (i.e., it requires reading additional meta-data from the VM). Generally, what'd I'd like to happen for a single-disk snapshot (in my understanding) is: Pause the VM Rename current disk to some other name which specifies it as a base-snapshot Create a new VHD which has the renamed VHD as parent path and is marked as "current" Swap the VHD for the VM for the snapshotted hard-disk to the newly created differential VHD Resume the VM Is there any means to do this programatically? Update: I've seen that this is actually possible with SCSI-disks, i.e. pause the VM, remove the SCSI disk, make the snapshot, reattach the SCSI disk at the same position, resume the VM. And, the VM resumes properly. But: is something similar also possible with G1 machines for the boot disk which is always IDE?

    Read the article

  • Discrepancy in file size on disk and ls output

    - by smokinguns
    I have a script that checks for gzipped file sizes greater than 1MB and outputs files along with their sizes as a report. This is the code: myReport=`ls -ltrh "$somePath" | egrep '\.gz$' | awk '{print $9,"=>",$5}'` # Count files that exceed 1MB oversizeFiles=`find "$somePath" -maxdepth 1 -size +1M -iname "*.gz" -print0 | xargs -0 ls -lh | wc -l` if [ $oversizeFiles -eq 0 ];then status="PASS" else status="CHECK FAILED. FOUND FILES GREATER THAN 1MB" fi echo -e $status"\n"$myReport The problem is that ls command outputs the files sizes as 1.0MB in the report but the status is "FAIL" as "$oversizeFiles" variable's value is 2. I checked the file sizes on disk and 2 files are 1.1MB. Why this discrepancy? How should I modify the script so that I can generate an accurate report? BTW, I'm on a Mac. Here is what man page for "find" says on my Mac OSX: -size n[ckMGTP] True if the file's size, rounded up, in 512-byte blocks is n. If n is followed by a c,then the primary is true if the file's size is n bytes (characters). Similarly if n is followed by a scale indicator then the file's size is compared to n scaled as: k kilobytes (1024 bytes) M megabytes (1024 kilobytes) G gigabytes (1024 megabytes) T terabytes (1024 gigabytes) P petabytes (1024 terabytes)

    Read the article

  • TCP Keepalive and firewall killing idle sessions

    - by Carlos A. Ibarra
    In a customer site, the network team added a firewall between the client and the server. This is causing idle connections to get disconnected after about 40 minutes of idle time. The network people say that the firewall doesn't have any idle connection timeout, but the fact is that the idle connections get broken. In order to get around this, we first configured the server (a Linux machine) with TCP keepalives turned on with tcp_keepalive_time=300, tcp_keepalive_intvl=300, and tcp_keepalive_probes=30000. This works, and the connections stay viable for days or more. However, we would also like the server to detect dead clients and kill the connection, so we changed the settings to time=300,intvl=180,probes=10, thinking that if the client was indeed alive, the server would probe every 300s (5 minutes) and the client would respond with an ACK and that would keep the firewall from seeing this as an idle connection and killing it. If the client was dead, after 10 probes, the server would abort the connection. To our surprise, the idle but alive connections get killed after about 40 minutes as before. Wireshark running on the client side shows no keepalives at all between the server and client, even when keepalives are enabled on the server. What could be happening here? If the keepalive settings on the server are time=300,intvl=180,probes=10, I would expect that if the client is alive but idle, the server would send keepalive probes every 300 seconds and leave the connection alone, and if the client is dead, it would send one after 300 seconds, then 9 more probes every 180 seconds before killing the connection. Am I right? One possibility is that the firewall is somehow intercepting the keepalive probes from the server and failing to pass them on to the client, and the fact that it got a probe makes it think that the connection is active. Is this common behavior for a firewall? We don't know what kind of firewall is involved. The server is a Teradata node and the connection is from a Teradata client utility to the database server, port 1025 on the server side, but we have seen the same problem with an SSH connection so we think it affects all TCP connections.

    Read the article

  • How can I redirect/forward all the UDP/TCP traffic on one interface to another interface in OpenWrt

    - by Sina Sou
    I am new to networking and I have a measurement device (D) that periodically sends all its readings over few UDP multicast sockets (with different multicast IP addresses and different port numbers). That device even listens to a TCP socket simultaneously to modify its configuration on port 7234. Since the device has just a Ethernet interface for communication and I want to make it work wireless, I decided to use a very small wireless open-wrt based router that attaches to the device (D) and redirect/forward all the network traffic(Both UDP/TCP) to the router wireless interface. In order to simplify the problem assume that the Device (D) establishes following sockets (at the same time) UM_SOCK1: UDP mcast socket on 239.1.2.3 port# 50620 UM_SOCK2: UDP mcast socket on 239.1.2.4 port# 50640 TC_SOCK3: TCP DHCP/STATIC ip address 192.168.1.200 port 7234 And (D) is connected to Open-Wrt router (R) via interface en01 (Ethernet) the router has it own wireless interface on (wlan0) I want all the traffic from interface pass through wlan01 and vice versa (bi-directional) en01 <---- wlan01 What would be the minimum iptables or ... commands that I need to make this possible? Even I am wondering if traffic directing can be made easier like if the direction is not going to be based on IP addresses(not desired if the device is connected via DHCP) I would rather redirection to be Interface(en0) based or on MAC address (The best solution since my device has unique MAC address)? Thanks

    Read the article

  • Persistent PuTTY sessions for multiple windows

    - by Tgr
    I'm working in various Linux environments through PuTTY connections which break from time to time. I'm looking for a solution to make the PuTTY windows persist (e.g. if I was editing a file, then after reconnecting I should be in the same editor with the same file open at the same place), with the following requirements: it shouldn't require any manual setup at the beginning of the session or after reconnection (I don't want to type in screen or anything like that) I have several windows open to the same machine with the same user, which tend to disconnect at the same time the number/role of windows is not constant (it's not like I have an mc window, a mysql window and a "script runner" window; sometimes I use one window for search or for SVN commands, other times I need several at the same time) sometimes I need to change the properties of the windows for a task (large window for grepping/editing, small windows because I need to see two of them at the same time, red background because I am modifying the live database in MySQL etc), so I need to get the same console back in the same window after a reconnect Is there a way to achieve this? I suppose I should use screen or something equivalent, but how does it know which window I am reconnecting from? Is there some way to pass a unique window identifier to the shell from PuTTY?

    Read the article

  • Variable TTL inside a LAN

    - by user140783
    I recently discovered that ping my local router, returns different TTL values??. The ping 3 switch must pass through before reaching the router, there may be the problem? 192.168.1.99 is the IP of my router , a Cisco WRT120N Thank you! Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo=29ms TTL=3 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=131 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=111 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=240 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=51 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Traceroute G:\Documents and Settings\Administrador>tracert 192.168.1.99 Traza a la dirección maxi2011 [192.168.1.99] sobre un máximo de 30 saltos: 1 <1 ms <1 ms <1 ms maxi2011 [192.168.1.99] Traza completa. G:\Documents and Settings\Administradorping 192.168.1.99 Haciendo ping a 192.168.1.99 con 32 bytes de datos: Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Estadísticas de ping para 192.168.1.99: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms G:\Documents and Settings\Administrador

    Read the article

  • Varnish does not start properly (crashes after startup) with no error messages

    - by Matthew Savage
    I am running Varnish (2.0.4 from the Ubuntu unstable apt repository, though I have also used the standard repository) in a test environment (Virtual Machines) on Ubuntu 9.10, soon to be 10.04. When I have a working configuration and the server starts successfully it seems like everything is fine, however if, for whatever reason, I stop and then restart the varnish daemon it doesn't always startup properly, and there are no errors going into syslog or messages to indicate what might be wrong. If I run varnish in debug mode (-d) and issue start when prompted then 7 times out of time it will run, but occasionally it will just shut down 'silently'. My startup command is (the $1 allows for me to pass -d to the script this lives in): varnishd -a :80 $1 \ -T 127.0.0.1:6082 \ -s malloc,1GB \ -f /home/deploy/mysite.vcl \ -u deploy \ -g deploy \ -p obj_workspace=4096 \ -p sess_workspace=262144 \ -p listen_depth=2048 \ -p overflow_max=2000 \ -p ping_interval=2 \ -p log_hashstring=off \ -h classic,5000009 \ -p thread_pool_max=1000 \ -p lru_interval=60 \ -p esi_syntax=0x00000003 \ -p sess_timeout=10 \ -p thread_pools=1 \ -p thread_pool_min=100 \ -p shm_workspace=32768 \ -p thread_pool_add_delay=1 and the VCL looks like this: # nginx/passenger server, HTTP:81 backend default { .host = "127.0.0.1"; .port = "81"; } sub vcl_recv { # Don't cache the /useradmin or /admin path if (req.url ~ "^/(useradmin|admin|session|sessions|login|members|logout|forgot_password)") { pipe; } # If cache is 'regenerating' then allow for old cache to be served set req.grace = 2m; # Forward to cache lookup lookup; } # This should be obvious sub vcl_hit { deliver; } sub vcl_fetch { # See link #16, allow for old cache serving set obj.grace = 2m; if (req.url ~ "\.(png|gif|jpg|swf|css|js)$") { deliver; } remove obj.http.Set-Cookie; remove obj.http.Etag; set obj.http.Cache-Control = "no-cache"; set obj.ttl = 7d; deliver; } Any suggestions would be greatly appreciated, this is driving me absolutely crazy, especially because its such an inconsistent behaviour.

    Read the article

  • Windows 2008 R2 file share - any way to "lock it down" outside of a 3rd party app?

    - by TheCleaner
    I have a 3rd party app that "makes a call" to write files to a file share on our network using the currently logged in credentials of the Windows domain user. Meaning the 3rd party app doesn't pass the apps credentials but simply issues a behind the scenes copy command to take a source file specified and copy/move it to the destination "repository" on the file share. The basic premise is that it keeps revisions/approvals for Document Control (think svn/git I guess, similar to this question: Lock down Windows folder to only be updatable by SVN). This all works fine...but here's my issue: I need a way to lock down the file share from being accessed/modified outside of using the 3rd party app (meaning prevent explorer/word/excel/etc from getting to that share). I know I can do the following: make the share a hidden share ($) - this definitely helps. Most users would have zero clue on how to get to such a share. Solves probably 95% of my issue. go one step further and set the "Hidden" attribute on the folders in the hidden share - this would go a little further in that even if a user knows the path to the hidden share like \\server\hidden$ they still won't see folders in that share without changing their explorer options to "show hidden files/folder Any other ideas on how I can lock this down? The users still need modify rights to this share/folders since the 3rd party app relies on their Windows permissions to that location when copying the files into it. I can't really use 3rd party tools to password protect the folder/share without causing the 3rd party app functions to fail.

    Read the article

  • MySQL based authentication with crypt()ed password fails in Apache 2.2

    - by Fester Bestertester
    I'm trying to set up a simple CalDAV/CardDAV server with a Radicale backend and an Apache 2.2 frontend. So far, it's all nice and simple, but I can't get the MySQL based authentication to work. I'd like to authenticate users against an existing MySQL database, and I need the REMOTE_USER variable to be set (pretty much like in the configuration examples for Radicale). I've tried mod_auth_mysql, which authenticated the users nicely, but failed to set the REMOTE_USER variable. The newer alternative seems to be mod_authn_dbd, which doesn't seem to like the crypted passwords in the MySQL database. According to the documentation, crypted passwords should work, so maybe I'm just missing a simple parameter. The configuration looks like this: DBDriver mysql DBDParams "sock=/var/run/mysqld/mysqld.sock dbname=myAuthDB user=myAuthUser pass=myAuthPW <Directory /> AllowOverride None Order allow,deny allow from all AuthName 'CalDav' AuthType Basic AuthBasicProvider dbd require valid-user AuthDBDUserPWQuery "SELECT crypt FROM myAuthTable WHERE id=%s" </Directory> I've tested the query, it works fine. And as mentioned before, mod_auth_mysql worked nicely against the same database, but didn't set the required variables. Am I just missing some configuration parameter? Or is mod_authn_dbd just not the right tool to achieve what I want?

    Read the article

  • VPN sharing on Mac OS X 10.5 machine

    - by Jens
    I have a rather weird problem. I want to share a VPN connection that has been established by my Mac OS X 10.5 computer with another machine in my network. This is what I did: In the /etc/hostcongig file on the main computer I added the line: IPFORWARDING=-YES- I assigned a fixed IP address to my computer (192.168.178.30), a fixed one to the other machine (192.168.178.60) and my computer's IP address as gateway on the other machine. I connected to my VPN using the internal Mac OS X VPN client (PPTP connection) I run this script: #!/bin/sh natd -same_ports -use_sockets -unregistered_only -dynamic -interface ppp0 -clamp_mss ipfw -f flush ipfw add divert natd ip from any to any via ppp0 ipfw add pass all from any to any sysctl -w net.inet.ip.forwarding=1 Source: Using (and sharing) a VPN connection on your Mac Now everthing works smootly, however speed is an issue. I get 1,8 MBit/s on my main machine and only 0,3 - 0,6 MBit/s on the other one. My question: What could possibly be wrong? Do I have to tweak MTU settings, is there any packet inspection ongoing that needs time....? Any help appreciated!

    Read the article

  • Reading email from Emacs VM using a secure server (Gmail)

    - by Alan Wehmann
    This is a question (see below) originally entered at https://answers.launchpad.net/vm/+question/108267 and upon the recommendation of Uday Reddy the question and answers are being moved here. The date of the original question was May 4, 2010. One subject of the question is use of the program stunnel with program View Mail (run within Emacs) on a PC running Microsoft Windows, in order to read email from a server that requires use of TSL/SSL (Gmail). See the related question, How to configure Emacs smtp for secure server for using a secure server, for sending email. The programs discussed are Emacs, VM (ViewMail) and stunnel. The platform under discussion is MS Windows. The original question was asked by usr345 on 2010-04-24: I tried to install vm on Windows, but when I tried to get the mail from gmail using ssl, an error emerges, emacs hanges-up. Here is the code from .emacs: (add-to-list 'load-path (expand-file-name "~/vm/lisp")) (add-to-list 'Info-default-directory-list (expand-file-name "~/vm/info")) (require 'vm-autoloads) (setq vm-primary-inbox "~/mail/inbox.mbox") (setq vm-crash-box "~/mail/inbox.crash.mbox") (setq vm-spool-files `((,vm-primary-inbox "pop-ssl:pop.gmail.com:995:pass:usr345:PASSWORD" ,vm-crash-box))) (setq vm-stunnel-program "g:/program files/stunnel/stunnel.exe") So, the question: How to configure pop-ssl on Windows?

    Read the article

  • Hide/Replace Nginx Location Header?

    - by Steven Ou
    I am trying to pass a PCI compliance test, and I'm getting a single "high risk vulnerability". The problem is described as: Information on the machine which a web server is located is sometimes included in the header of a web page. Under certain circumstances that information may include local information from behind a firewall or proxy server such as the local IP address. It looks like Nginx is responding with: Service: https Received: HTTP/1.1 302 Found Cache-Control: no-cache Content-Type: text/html; charset=utf-8 Location: http://ip-10-194-73-254/ Server: nginx/1.0.4 + Phusion Passenger 3.0.7 (mod_rails/mod_rack) Status: 302 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 3.0.7 X-Runtime: 0 Content-Length: 90 Connection: Close <html><body>You are being <a href="http://ip-10-194-73-254/">redirect ed</a>.</body></html> I'm no expert, so please correct me if I'm wrong: but from what I gathered, I think the problem is that the Location header is returning http://ip-10-194-73-254/, which is a private address, when it should be returning our domain name (which is ravn.com). So, I'm guessing I need to either hide or replace the Location header somehow? I'm a programmer and not a server admin so I have no idea what to do... Any help would be greatly appreciated! Also, might I add that we're running more than 1 server, so the configuration would need to be transferable to any server with any private address.

    Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >