Search Results

Search found 18628 results on 746 pages for 'artificial neural network'.

Page 313/746 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • Powershell Win32_NetworkAdapterConfiguration Not "seeing" PPP Adapter

    - by Ben
    I am trying to get the IP of a PPP VPN network connection, but Win32_NetworkAdapterConfiguration does not seem to "see" it. If I interrogate all adapters using my script, it will see everything but the PPP VPN adapter. Is there a specific filter or something I need to enable, or do I need a different class? My Script: $colItems = Get-wmiobject Win32_NetworkAdapterConfiguration foreach ($objItem in $colItems) { Write-Host Description: $objItem.Description Write-Host IP Address: $objItem.IPAddress Write-Host "" } Script Output: Description: WAN Miniport (SSTP) IP Address: Description: WAN Miniport (IKEv2) IP Address: Description: WAN Miniport (L2TP) IP Address: Description: WAN Miniport (PPTP) IP Address: Description: WAN Miniport (PPPOE) IP Address: Description: WAN Miniport (IPv6) IP Address: Description: WAN Miniport (Network Monitor) IP Address: Description: Intel(R) PRO/Wireless 3945ABG Network Connection IP Address: 192.168.2.5 Description: WAN Miniport (IP) IP Address: ipconfig /all output: PPP adapter My VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : My VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.1.8.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.1.1.3 10.1.1.2 Primary WINS Server . . . . . . . : 10.1.1.2 Secondary WINS Server . . . . . . : 10.1.1.3 NetBIOS over Tcpip. . . . . . . . : Enabled Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Belkin Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-3F-3C-22-22-22 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.5(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 25 May 2010 20:33:19 Lease Expires . . . . . . . . . . : 22 May 2020 20:33:17 Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DNS Servers . . . . . . . . . . . : 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled Thanks in advance, Ben

    Read the article

  • Which linux distro for a laptop in windows environmet?

    - by Dev er dev
    I just got new laptop at work. What would you recommend as a linux distribution for it? All other developers are working under windows, and use windows tools. I'm currently using ArchLinux, but want to change it. I don't want to waste time configuring wireless, windows network shares, network pritners, projector, etc ... I want this stuff to just work, while still having sane and stable development evironment and tools. Is Ubuntu a good choice for this? I use gentoo at home, but don't think it is a good match for work environmet. EDIT: Note that we are working on cross platform apps, and deployment platform is almost always linux. There are very few windows apps that I have to use (like MS Project). It is just that everything else is windows centric. I use linux because I feel more productive with it, even if I have to dual boot to edit MS Project files.

    Read the article

  • Cannot Access IIS Website Locally Using www

    - by Reafidy
    I have small website hosted on our WS 2008 R2 server using IIS 7. I can access our website from anywhere in the world using: www.ourwebsite.co.nz But from any local computer on our internal network I can only access the website using: http://ourwebsite.co.nz Our employees are constantly asking why they cant just use www.ourwebsite.co.nz I'm not sure what info to provide. I presume that because the wesbite correctly functions from outside the local network that I have correctly setup our Web DNS A records at our domain host. And the problem may lie with our local DNS configuration.

    Read the article

  • How to handle external and internal DNS on windows 2012

    - by ThePopcorn
    I'm trying to setup an Active Directory network on Server 2012 R2, and want AD's DNS to only be used internally (Ex: domain-controller.company.com) as well as some records that need both internal and external accessibility (Ex: mail.company.com) that use internal IP's on the internal network and finally some records that only need external access. The only solutions i have been able to think of, or look up are to either use a sub domain that handles all internal records, and use the plain company.com domain for all external records. These both seem to mean i have to manage two DNS servers separately. Is either of these the best ways or am i messing up somewhere?

    Read the article

  • custom route not working on windows

    - by Michael Closson
    My windows laptop is directly connected to 192.168.1.0/24 (wireless lan). I access 10.21.0.0/16 though a router that is connected to both networks. The routing works fine with this configuration. I have a VPN, that connects to 10.0.0.0/8. The VPN network doesn't actually use any IPs in the 10.21.0.0/16 range. So I should be able to configure my routing table to route all the 10.21.0.0/16 IPs through the wireless lan, and all other 10.0.0.0/8 through the VPN. My understanding is that I can do this if the metric for the 10.21.0.0 is lower than that of the 10.0.0.0. The VPN (10.0.0.0) is automatically assigned metric 20. I have manually assigned the WLAN a metric of 1. I manually add an entry to the routing table with this command: route add 10.21.0.0 mask 255.255.0.0 192.168.1.201 metric 1 The route is then assigned a metric of 2 (which is expected). The problem is that it doesn't work. I can't ping any machine on the 10.21.0.0 network. But I can access other stuff on the 10.0.0.0. I can also access stuff on the 192.168.1.0. To debug this i've done the following. Run tcpdump on the router (192.168.1.201). I can verify that no packets for 10.21.0.0 arrive on that interface. Disable iptables on the router. Disable the windows firewall. Run wireshark on my laptop, to try and see which interface the ping requests go to. But I can't see them go anywhere!! The ping command doesn't receive any 'destination unreachable' messages. Here is the relevant section of the routing table. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.18 2 10.0.0.0 255.0.0.0 On-link 10.55.44.203 20 10.21.0.0 255.255.0.0 192.168.1.201 192.168.1.18 2

    Read the article

  • Oracle Solaris 11.1 Announced at Oracle OpenWorld

    - by glynn
    One of the highlights for me at Oracle OpenWorld was our announcement of the next update version to Oracle Solaris 11, named Oracle Solaris 11.1. Since November 2011, we've done a lot of work not only to polish existing features and fix literally hundreds of bugs, but also add many new features that give yet more reasons for using Oracle Solaris as the deployment platform for Oracle workloads - particularly the Oracle database. Over the last few years since the Sun Microsystems acquisition, we've had our developers sitting in Redwood Shores with the Oracle database team figuring out how to best optimize that combination and provide a level of integration that no other vendor (or solution) can match. Oracle Solaris 11.1 is often the first release many customers will adopt due to perceived instability of '.0' releases. In reality, however, we've seen incredible adoption already and all our existing customers are loving the new technologies like Image Packaging System (IPS), Automated Installer and ZFS Boot Environments, consolidated network management and network virtualization, and of course the existing features that are so critical to creating private, hybrid or public cloud environments like the Oracle Solaris ZFS file system and Oracle Solaris Zones server virtualization. If you haven't already gotten on board, there's plenty chance to catch up. More importantly, Oracle Solaris 11.1 really provides a platform that is significantly easier to manage than any previous Solaris releases - to the extent that it should be relatively straightforward for any experienced Linux administrator to get up to speed (if they're struggling, we have ways to help). So take a look at what's new in Oracle Solaris 11.1 and start planning your deployment now! If you missed the announcement, you can see the full video of John Fowler's keynote at Oracle OpenWorld here:

    Read the article

  • TP-Link TL-WA701N not working good as wireless extender

    - by djechelon
    I bought the device in subject to extend the range of my WPA2/PSK-protected wifi network powered by a TP-Link TL-WR340G device (AP+router). I configured it as follows: Operation mode: Universal Repeater MAC of AP: scanned my SSID and got it Channel width: 20MHz Security options: the same as the parent AP (WPA2/PSK with AES encryption) After configuration inSSIDer shows me two APs beaconing the same SSID at different SNRs (because I was with my laptop close to the extender). After a few hours my tablet, far from the parent AP, stopped working. I found that the scan reported two networks with the same SSID: one WPA-protected and one free at all. This happened very frequently. Rebooting the extender by unplugging it worked but this doesn't last long. Sometimes the extender stops transmitting at all, sometimes it beacons an open network to which nobody can connect (because there is no DHCP). What's wrong with my configuration?

    Read the article

  • Aventail VPN connect on Mac OS X 10.6.2 Snow Leopard

    - by Warlax
    Hello, I am running Mac OS X Snow Leopard (10.6.2). Recently, my company switched (for whatever odd reason) from Cisco VPN (that used to work fine) to Aventail VPN. I proceeded to install the Aventail VPN client on both the mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get the following page: http://grab.by/2WOA It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless and I was hoping fellow super users can help. Thanks.

    Read the article

  • AWS VPN Tunnel going down without traffic

    - by Asfura
    I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time there's no traffic going trough for a couple minutes. The only way that i have found to generate traffic is to reach the amazon instance from the company's network and then the tunnel goes up again. I had a cronjob doing ping every minute, but i think it should have a keepalive option somewhere, or at least a log file of the tunnels to find out what's going on. Any ideas to keep the tunnel up and/or bring it up from amazon? The firewall is a Checkpoint R75.20, it only allows one tunnel at a time for the same subnet, so i cant have both tunnels active. Thank you, any questions just ask. EDIT I forgot to add, the ping keepalive was working great (maybe generating a bit of traffic, but nothing to worry about), the connection dropped because i had to restart the instance, and it that little time it dropped me.

    Read the article

  • KVM-Guests can't get past bridge - no internet connection

    - by tmn29a
    I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

    Read the article

  • Tunlr Gives Non-US Residents Access to Hulu, Netflix, and More

    - by Jason Fitzpatrick
    If you’re outside the US market and looking to enjoy US streaming services like Hulu, Netflix, and more, Tunlr is a free and simple service that will get you connected. Unlike other tools that are more expensive (both in price and in hardware/bandwidth overhead) like VPN services, Tunlr doesn’t set up a full tunnel but instead serves as an alternative DNS server that allows you to access previously blocked content. From the Tunlr FAQ: Tunlr does not provide a virtual private network (VPN). Tunlr is a DNS (domain name system) unblocking service. We’re using sophisticated technologies (a.k.a. the Tunlr Secret Sauce ©) to re-adress certain data envelopes, tricking the receiver into thinking the envelope originated from within the U.S. For these data envelopes, Tunlr is transparently creating a network tunnel from your location to our U.S.-based servers. Any data that’s not directly related to the video or music content providers which Tunlr supports is not only left untouched, it’s also not even routed through Tunlr. Hit up the link below for more information about the service, including how to set it up on various operating systems, portable devices, and gaming consoles. Tunlr [via gHacks] HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now

    Read the article

  • Windows 8.1 killed notebook's wifi

    - by char1es
    Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

    Read the article

  • Tools to test multicast routing

    - by Zoredache
    I am looking for a good simple tool that runs on a standard OS (Windows or Linux) that I can used to test that multicast is being passed properly by a router. I have been asked by a client to enable multicast routing on a Linux box acting as their router since their phone system requires multicast to for a few features. Since I am not physically near the client I don't really have the ability to experiment with the various methods for setting up multicast routing on Linux. I can setup a router at my desk that is identical to what is deployed on their network, but I don't know of any good simple tools that I can use to generate or listen for multicast traffic. The one mulicast tool I have found is mcast.exe tool which is part of the Windows 2000/2003 resource kit. From what I have read online it seems that mcast.exe does not work across a router, and only works on the local network, so that doesn't seem to be useful for me to test multicast routing. So what do tool(s) do you use to test that multicast routing is properly setup?

    Read the article

  • Duplicate IP address detection with multiple NICs

    - by sfink
    I am using arping -D to detect duplicate IP addresses within a network when setting up servers. (The network is controlled by someone else, and we have had many issues with IP allocation in the past.) It works fine as long as my host has a single NIC on a given VLAN, but when my host has more than one (I have one with 9 NICs on one VLAN and 1 on the other), arping -D always returns false collisions. The problem is that all 9 of my NICs respond to an ARP request for any of the IPs on those NICs. (These are real physical NICs, not aliases or anything.) I send out one ARP request packet, and get 9 ARP is-at ARP replies, one for each MAC address. I could implement my own solution by sniffing packets and checking for any replies with a MAC address other than the local NICs', but it seems like there ought to be an easier way.

    Read the article

  • Will being a VPN Client interrupt web pages hosted by IIS?

    - by f1gm3nt3d
    We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

    Read the article

  • Python HTTPS requests (urllib2) fails on Ubuntu 12.04 without proxy

    - by Pablo
    I have an little app I wrote in Python and it used to work... until yesterday, when it suddenly started giving me an error in a HTTPS connection. I don't remember if there was an update, but both Python 2.7.3rc2 and Python 3.2 are failing just the same. I googled it and found out that this happens when people are behind a proxy, but I'm not (and nothing have changed in my network since the last time it worked). My syster's computer running windows and Python 2.7.2 has no problems (in the same network). response = urllib2.urlopen(url).read() File "/usr/lib/python2.7/urllib2.py", line 126, in urlopen return _opener.open(url, data, timeout) File "/usr/lib/python2.7/urllib2.py", line 400, in open response = self._open(req, data) File "/usr/lib/python2.7/urllib2.py", line 418, in _open '_open', req) File "/usr/lib/python2.7/urllib2.py", line 378, in _call_chain result = func(*args) File "/usr/lib/python2.7/urllib2.py", line 1215, in https_open return self.do_open(httplib.HTTPSConnection, req) File "/usr/lib/python2.7/urllib2.py", line 1177, in do_open raise URLError(err) urllib2.URLError: <urlopen error [Errno 8] _ssl.c:504: EOF occurred in violation of protocol> What's wrong? Any help is appreciated. PS.: Older python versions don't work either, not in my system and not in a live session from USB, but DO work in a Ubuntu 11.10 live session.

    Read the article

  • What would I need to do to clone a Linux install to another machine?

    - by Marcus Hughes
    Basically, I want to make an image of one Linux install I have, and distribute it over similar (if not identical) spec machines on a network. I know it is possible, however am unsure of what needs to be done before I make the image of the install to ensure it works correctly on all machines. First think I know needs to be done, is remove all interface configuration, as I assume it would just jump to eth1 (and possibly use the same MAC), as it wont locate the network interface it had before, how would I do this so it auto detects and goes to eth0 again? Is there anything else I would need to do to the install before I make its image?

    Read the article

  • hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

    - by Ahmed Kotb
    i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Setting up a fileserver, some questions?

    - by Tanax
    Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

    Read the article

  • Setting up a fileserver, some questions?

    - by Tanax
    Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

    Read the article

  • Bad to be logged in as admin all the time?

    - by poke
    At the office where I work, three of the other members of the IT staff are logged into their computers all the time with accounts that are members of the domain administrators group. I have serious concerns about being logged in with admin rights (either local or for the domain). As such, for everyday computer use, I use an account that just has regular user privelages. I also have an different account that is part of the domain admins group. I use this account when I need to do something that requires elevated privilages on my computer, one of the servers, or on another user's computer. What is the best practice here? Should network admins be logged in with rights to the entire network all the time (or even their local computer for that matter)?

    Read the article

  • Error when installing SQL Server 2008 R2 Express

    - by dretzlaff17
    When installing SQL Server 2008 R2 from the command line prompt, I am getting the following error that is recorded in the Summary file. Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20101217_131444\SystemConfigurationCheck_Report.htm Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: System.ArgumentNullException Message: Value cannot be null. Parameter name: path2 Data: DisableWatson = true Stack: at System.IO.Path.Combine(String path1, String path2) at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPublic.RecomputeDirectoryPaths() at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPublic.Calculate() at Microsoft.SqlServer.Configuration.SetupExtension.FinalCalculateSettingsAction.ExecuteAction(String actionId) at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) Has anyone seen this. Here is what I am sending for the command line parameters. /q /ACTION=Install /FEATURES=SQLEngine /SECURITYMODE=SQL /SAPWD="myPassword" /BROWSERSVCSTARTUPTYPE=Automatic /SQLSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\Network Service" /SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS" /AGTSVCACCOUNT="NT AUTHORITY\Network Service" /IACCEPTSQLSERVERLICENSETERMS

    Read the article

  • Simple Workstation Imaging Solution?

    - by user23087
    I need a fairly cheap imaging solution for Windows XP corporate desktops. Ideally, I'd be able to set up a desktop exactly as we want it, create an image, deploy this image to a server, then boot a new desktop to a CD/USB Drive/Network and quickly set up the workstation. Ideally, each computer would also have a unique workstation name. Any ideas? Right now I'm using a custom built Linux DD solution, but it's slow, not network-based, can't image multiple computers at the same time as there's only one copy on a USB drive, and can't uniquely name the computers. Thanks, Will

    Read the article

  • Windows Vista: Networking can only connect "local only"

    - by Damien
    I am attempting to debug a problem on a Windows Vista laptop - not mine! Until just recently (last week or so), it was operating normally for about 4 years :) The problem is that I am having issues connecting to the local network (a basic wireless home router; more later) and the internet (via ADSL). This is both for wired [Broadcom chipset] and wireless [Intel chipset]. I will elaborate further later. To detail the network. I have three other clients (HTC phone, Ubuntu 12.04 desktop [wired] and Ubuntu 10.04 laptop [wireless]), all of whom are able to connect to the network and internet normally. A windows 7 virtual machine running on said desktop connects normally. I have tried two different wireless routers - Netgear DG834G and Netgear DGN3500. The same error mode is common to both. Updating the firmware to the latest on both routers does not help. Overall, it seems safe to say it's localised to the laptop in question. I do not have another Vista client to test with. The specific symptoms are as follows: When "connected", it says "Local Only", and says it cannot connect to the internet. This is true for both wired and wireless. It can get an IP address (192.168.0.5), and the router (192.168.0.1) reports that it can see the device. When I try to ping, I get the following results: ping 192.168.0.1 - (router) all packets lost ping 192.168.0.5 - (laptop's address) OK ping 192.168.0.4 - (desktop) all packets lost Pinging from the desktop to the problematic laptop results in "From 192.168.0.4 icmp_seq=1 Destination Host Unreachable" The most promising "fix" from trawling forums is KB928233 which does not work for me. The problem is persistent across reports (both full shutdown and hibernate) so it appears not to be sleep related. I am not a regular vista user, though I can fumble my way about a bit. Is there any other suggestions as to what I should do? Is there any further information I can provide?

    Read the article

  • Incredibly high latency for Ubuntu guest on Hyper-V

    - by Mark Henderson
    I've got several Ubuntu 10.04 virtual machines running as Hyper-V guests on Windows Server 2008 R2 SP1 and they're all perfectly fine. Today I installed my first Ubuntu 11.10 virtual machine and I'm seeing rediculous pings: These servers are all connected via gigabit to a local LAN, with almost no network traffic at all1, with a legacy network adapter in Hyper-V. I'm a bit of an Ubuntu n00b so I don't really know where to go from here. Any ideas? free -m reports: total used free shared buffers cached Mem: 485 470 15 0 63 299 -/+ buffers/cache: 107 378 Swap: 507 20 487 This is within a few mb of our other Ubuntu servers that are on 10.04. I removed the Legacy NIC and installed a Synthetic one in Hyper-V and this did improve the numbers, in that they're around 10-30ms now, but I would still be expecting <1ms response times. 1As a comparison, I have another Ubuntu 10.04 guest on Hyper-V almost 1,000km away that has a ping of 33ms

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >