Search Results

Search found 9122 results on 365 pages for 'chris card'.

Page 313/365 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

• How do I get HDMI output working on a Dell XPS 15 L502x?

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

  - by WarriorIng64

  I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

  Read the article

• How do I fix "Ubuntu is running in low-graphics mode?"

  - by Tortoise

  First off, I'm running Ubuntu 10.04 on a 30gb partition, the rest of my hdd is for a vista partition. The way I installed this was, I shrunk the vista partition and installed Ubuntu in the largest block of free space. Ubuntu has been working fine for a few weeks, and I've loved it, but today I was doing something in Vista (something simple) and I restarted to go back into ubuntu, and when it tried to boot up I got a message that said: "Ubuntu is running in low-graphics mode. Your screen, graphics card, and input devices could not be detected correctly. You will have to configure these yourself." I click OK, and it gives me a few options but all of them are dead ends. Basically, I'm stuck in CLI right now without a clue of how to fix it. I've tried doing a full update and it hasn't made a difference. I've already been asking for help in #Ubuntu and #Radeon and I was directed by some of them here, so I hope I can find some answers here. Also, I'm using an ATI Radeon X1200. Any help would be greatly appreciated. Another thing, while I was trying to get help in #radeon I was told that it could possibly be this bug.

  Read the article

• How do I install the nvidia driver for a GeForce 9300M?

  - by Alex

  Yesterday i've installed ubuntu 11.04 (instead of 10.10). And i need to install nvidia driver which supports opengl 3.3 In 10.10 i did it in a such way: Ctrl+alt+f1 login sudo /etc/init.d/gdm stop sudo sh driver.run startx Not it doesn't work. Because ctrl+alt+f1 doesn't show login screen. Just only black screen. I've googled this problem. Some people have it but no one knows how to solve. Sometimes people say that it is connected with video card or driver. But i have GeForce 9300M G, and i've activated a standard driver. Anyway, it worked in 10.10, but doesn't work now. The main problem is that i need to kill xserver to install this driver. killing the process just only restarts xserver. Also, I've tried to /etc/init.d/gdm stop in GUI-console. It says that "Fake initctl,doing nothing". Google didn't helped in this case too. Any ideas to install that driver?

  Read the article

• Ubuntu black screen after Installation of 12.10 Live USB

  - by Lime0fHint

  My computer was made in 2004, but I'm sure it doesn't matter since it's a durable machine. So recently, I decided to breathe new life to it with Linux. I tried Lubuntu 12.10, Nope. Black screen after install. So I tried Ubuntu 12.10 when I gave up, and same exact thing. Except, this time I'm fighting for it, since Ubuntu is the best OS I've ever seen. So back on-topic, when I start the installation, it says that something is already mounted (Sda or something of the sorts) So I just figure that it's the Live USB I'm using. So I let it ignore it, and move on. The rest of the installation goes smooth, all looks fine. Then I get to the screen with the introductory to Ubuntu. Meanwhile, it's still installing, but finishing up. I'm not sure if the install actually finishes, but I do know that after a bit, the screen goes back to the desktop. The install closes and I'm back at the desktop, and the cursor is showing the "loading" symbol, as if it were still working. Then the screen goes black, with the same cursor. After that, nothing. I left it over night like that thinking it was doing something, in the morning it was still black with the cursor circling or whatever. So what could be causing this? One concern I have is that I have a Nvidia graphics card (7300 GT). I heard that Nvidia isn't compatible with Linux? I did notice that it was marked as unreconigsed by Ubuntu, so is that the problem perhaps?

  Read the article

• Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

  - by jindrichm

  I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

  Read the article

• Bad Performance With Games Under Wine in Ubuntu 12.04

  - by Pandem

  I'm somewhat new to Linux. I've dabbled with it before but never more than just experimentation in a VM or dual boot where I almost always reverted back to Windows soon after (more due to a lack of commitment than a dislike for the OS). Anyway my problem is that in the two games (Guild Wars and Team Fortress 2) I've tried so far I get fairly bad performance. Despite both games having a "Platinum" rating I've still been forced to run both in DirectX 8, otherwise they either crash, have texture defects or the UI is missing. By "bad performance" I mean sub-30 FPS where there are some players and regular large framerate drops with video settings on low. Currently in my mind I believe the performance issues are just a problem with the drivers because my graphics card is a AMD 7850 which is virtually brand new and probably not properly supported yet but I'm unsure and would appreciate advice or tips to improve things. I have Ubuntu 12.04 installed and I am usually logged in a Gnome Classic session. I have installed AMD's proprietary drivers (Catalyst version 12.4) and have Wine 1.4 installed. I have used Winetricks to install DX9/DX10 dlls and other things.

  Read the article

• Usb stick too slow to benchmark?

  - by user85340

  I have a Core 2 Duo [email protected] with 3GB RAM. After some time using XUbuntu 10.10 on an 8GB stick I decided to switch to 12.04 and put it onto a 32GB stick (Transcend). I use an EXT4 with no journalling, noatime etc set. /tmp and /run is using tmpfs. And it is REALLY slow. MUCH slower than the old Xubuntu on the 8GB stick. Starting takes minutes, all applications "fade" because they respond too slow. I first thought that the NVidia graphics card is responsible for this, because there seem to be some known problems with that. Doing the adjustment (uncheck the sync checkbox) did not help. I believe the root cause is that the access to the USB stick is extremely slow. Running the read benchmark of the disk utility then brought the message "disk is too slow to benchmark"! BUT: When I do the same benchmark with the live CD I get around 20MB read performance and have a very responsive system! So how can I find out what is going one here?

  Read the article

• HP DV6 connects but no internet

  - by Frank Barcenas

  I have a Hewlett Packard DV6. I connected to the access point. I receive an IP address/default gateway/DNS,etc(DHCP). I cannot ping my gateway. DNS lookups fails. There is just no connectivity. My driver is listed as being IWLWIFI. An lspci shows my card to be a Realtek RTL8101E/RTL8102E. I can't ping myself from another computer. eth0 Link encap:Ethernet HWaddr c8:0a:a9:0c:a7:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:41 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:561 errors:0 dropped:0 overruns:0 frame:0 TX packets:561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42164 (42.1 KB) TX bytes:42164 (42.1 KB) wlan0 Link encap:Ethernet HWaddr 00:26:c7:04:97:c0 inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:c7ff:fe04:97c0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:71 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2035 (2.0 KB) TX bytes:12371 (12.3 KB)

  Read the article

• How can I disable the purple bootloader splash at boot?

  - by wim

  This question has been answered before, but neither of the methods in the accepted answer worked for me on 11.10. First I tried editing in /etc/default/grub, and then running sudo update-grub. But after that I still got a blank, plain, purple screen while the kernel is loading. The screen has no boot options, and it obscures those dmesg that I want to see going in the terminal. Next I tried removing the plymouth-theme-*, but that just broke my gnome-shell theme looks, and the purple screen still remains. I have also tried configuring it with startupmanager package, but nothing seems to get rid of that darned purple splash. here are the contents of my /etc/default/grub file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT="0" GRUB_HIDDEN_TIMEOUT="0" GRUB_HIDDEN_TIMEOUT_QUIET="true" GRUB_TIMEOUT="0" GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`" #GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) # GRUB_TERMINAL="console" # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE="640x480" # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID="true" # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" GRUB_DISABLE_OS_PROBER="true"

  Read the article

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• ubuntu 12.10 Lenovo b570e, WiFi connected but not working

  - by koogee

  I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

  Read the article

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• Wireless on ThinkPad Edge E420s

  - by user21820

  I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

  Read the article

• aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

  - by nimasmi

  I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

  Read the article

• Enabling GTX 570

  - by Silas

  Hello i just built up my new system: Asus Rock Z77 Extreme 4 Intel i7 3770k 16 Gb Corsair Ram Zotac Nvidia GTX 570 bequiet! 630W Power supply 120 GB SSD So after i installed UBUNTU 12.04 64 bit. It ran smoothly. I downloaded and installed all the recommended updates. After checking the Sytem details the GTX 570 didnt show up as graphics unit. so i figured i needed to download the drivers. So i did but being a complete newbie to linux i didnt succeed in installing them. (I think) Anyway after several tries and errors i shut down the PC and restarted it. Resultung in do Signal to my screen after trying to reboot and all the monitor outs with no result i took out the graphic card and now it boots normally but after booting it says there is a problem with the system the graphics cant be recognized something something. So Question A: What do i do? I Like linux but the arbitrarity of the Errors that occur without any changes to the system scare me. Question B: Is there A beginners guide to Ubuntu where i could start from scratch because i really want this to work? Question C: Now that the System is (suddently) showing these graphic errors So far without visible consequence despite the error message. should i reinstall the GPU and give the driver installation another try or the other way around? Ill be very grateful for any help. Thank you in advance!

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• Can T520+Bumblebee run an external monitor via DisplayPort?

  - by Fen

  Using 64-bit Ubuntu 11.10 and integrated (Intel) graphics, I can run the 1600x900 laptop display plus a 1600x1200 external monitor connected to the VGA adapter. But my external monitor is 1920x1200 so I have black stripes on each side. I believe the resolution is limited like this as the maximum resolution available from the Intel GPU is 2560x1600 = 4,096,000 pixels and I'm asking for a 3520x1200 = 4,224,000 display (with 1200x300 lost above the laptop screen). At 3200x1200 = 3,840,000 pixels, the Intel GPU seems happy. Under Windows, the same limit exists when using the VGA adapter, but if I turn Optimus on then I can connect the external monitor to the DisplayPort and get its full resolution and an extended desktop. I've seen that Bumblebee can run apps on the DisplayPort using the 'optirun' command. My question is: can Bumblebee run the DisplayPort in concert with the Intel card running the laptop screen creating a large virtual desktop (as on Windows)? If so, are there any pointers to how to do this? I tried once, failed, and dropped back to Integrated Graphics (and black stripes) as I could find no reports of this configuration working.

  Read the article

• Can't get Unity 3D to work in 11.10

  - by pmoseph

  I recently upgraded to 11.10 on my Lenovo ThinkPad T520, and I'm not able to load Unity 3D (I'm not selecting 2D at login menu either). me@mycomp:~$ echo $DESKTOP_SESSION ubuntu-2d I ran the unity support test below as well. me@mycomp:~$ /usr/lib/nux/unity_support_test -p Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: unable to create the OpenGL context And it looks like I only have one graphics card: me@mycomp:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Also, Ubuntu lists nothing under the "Additional Drivers" window. Any help would be extremely appreciated as I'm somewhat of a noob. Thanks! Edit 1: Here is the output of lshw -C display me@mycomp:~$ sudo lshw -C display *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64)

  Read the article

• Unity is broken after upgrading to 12.10 (Optimus laptop)

  - by SyS

  I upgraded to GNU/Linux Ubuntu 12.10 but have been unable to use Unity properly afterwards. Indeed, I encountered the exact same problem as a lot of people: the Unity side and top bars are not displaying, although in my case, Unity seems completely broken, as I can't even right-click. However, in my case, it's worth noticing that I have an Optimus laptop with a Nvidia graphics card (GeForce GT 540M). Bumblebee and its 'optirun' command is working just fine, as usual, after the upgrade. I tried several things, as resetting Compiz and Unity (with the command 'setside unity') -- which works but I have to do it everytime I boot and it resets all my settings -- updating/reinstalling/reconfiguring my Nvidia drivers as well as bumblebee, trying with Nouveau drivers instead of nvidia-current, check if linux-headers-generic were installed (they were). However, I couldn't reset xorg.conf files as they're just not there. There is neither xorg.conf file, nor its backup in /etc/X11. I think this is where the problem comes from, although I'm far from an expert. Maybe retrieving a xorg.conf file will fix this mess, but I have no idea how to do that. I'm just tired and don't know what to do. So, here I am, begging for your help.

  Read the article

• Wifi interface changes name seemingly at random

  - by ray_voelker

  I'm currently having some issues getting a wireless interface to work continuously under an install of Ubuntu 12.04.1 LTS. Some of the issues I'm experiencing include Connection will drop out after some time after it has initially worked. Interface will be a different name after a reboot. For example, wlan0 will become wlan4 when using the ifconfig -a command. Ubuntu will take a long time to boot, looking for network adapters. The purpose of this build is to function as a web kiosk in a library. The computer is supposed to boot up into a web browser, and allow for browsing of the catalog. For some reason this interface does not appear to be working as it should. Are there any explanations for some of these problems I'm having, and perhaps some solutions? The wireless card appears as this after doing an lspci ... Ralink corp. RT2561/RT61 802.11g PCI In the /etc/network/interfaces file I have the following configuration for the interface. auto wlan0 iface wlan0 inet dhcp wireless-essid UDwireless wireless-mode Managed Thanks in advance for help on this.

  Read the article

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• OpenGL : sluggish performance in extracting texture from GPU

  - by Cyan

  I'm currently working on an algorithm which creates a texture within a render buffer. The operations are pretty complex, but for the GPU this is a simple task, done very quickly. The problem is that, after creating the texture, i would like to save it. This requires to extract it from GPU memory. For this operation, i'm using glGetTexImage(). It works, but the performance is sluggish. No, i mean even slower than that. For example, an 8MB texture (uncompressed) requires 3 seconds (yes, seconds) to be extracted. That's mind puzzling. I'm almost wondering if my graphic card is connected by a serial link... Well, anyway, i've looked around, and found some people complaining about the same, but no working solution so far. The most promising advise was to "extract data in the native format of the GPU". Which i've tried and tried, but failed so far. Edit : by moving the call to glGetTexImage() in a different place, the speed has been a bit improved for the most dramatic samples : looking again at the 8MB texture, it knows requires 500ms, instead of 3sec. It's better, but still much too slow. Smaller texture sizes were not affected by the change (typical timing remained into the 60-80ms range). Using glFinish() didn't help either. Note that, if i call glFinish() (without glGetTexImage), i'm getting a fixed 16ms result, whatever the texture size or complexity. It really looks like the timing for a frame at 60fps. The timing is measured for the full rendering + saving sequence. The call to glGetTexImage() alone does not really matter. That being said, it is this call which changes the performance. And yes, of course, as stated at the beginning, the texture is "created into the GPU", hence the need to save it.

  Read the article

• Shader compile log depending on hardware

  - by dreta

  I'm done with the core of my graphics engine and I'm testing it on every platform I can get my hands on. Now, what I noticed is that different drivers return different shader and program compile log content. For example, on my friend's laptop if you successfuly compile a shader then the log is simply empty. However on my PC I get some useful information along with it. So if I compile a vertex shader, I'll get: Vertex shader was successfully compiled to run on hardware. Which isn't that impressive, but is what happens when I compile a program. On my friend's computer the log is empty, since the program compiles. However on my own computer I get: Vertex shader(s) linked, fragment shader(s) linked. Which is awesome, because I'm attaching a geometry shader with 0 (I have a geometry shader file with trash, so it doesn't compile and the pointer is set to 0), and the compiler just tells me which shaders linked. Now it got me thinking, if I was going to buy a graphics card, is there a way for me to get the information about whether or not I'll get this "extended" compile information? Maybe it's vendor specific? Now I don't expect an answer TBH, this seems a bit obscure, but maybe somebody has any experience with this and could post it.

  Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >