Search Results

Search found 10277 results on 412 pages for 'mail 22'.

Page 314/412 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• low-cost RAID NAS for home use?

  - by gravyface

  Have a noisy, power-hungry Pentium 4 based Ubuntu server that I want to replace with a nice, low-power mini-ITX/Intel Atom-based machine to do my network services (DHCP, DNS, IPSec, Web/mail, FTP, etc.) and am thinking of a (hopefully) equally-low powered NAS using NFS over GbE with at least 1 TB space and a RAID 5 (preferred) or RAID 0 (likely) configuration for redundancy with a couple of spare disks I can swap in as needed down the road. Would I be better off getting a full sized ATX mobo/case and configuring the RAID internally? I really want to keep power consumption down as much as possible as I leave my home server up 24/7.

  Read the article

• Can't connect to MySQL server on '127.0.0.1' + Postfix

  - by Andrew Dakin

  I just installed Postfix and configured it to use MySQL. It wasn't sending any emails out after I did that so I checked /var/log/mail.log and it came back with this: postfix/trivial-rewrite[5283]: fatal: proxy:mysql:/etc/postfix/mysql-domains.cf(0,lock|fold_fix): table lookup problem postfix/cleanup[5258]: warning: AFCDC30437: virtual_alias_maps map lookup problem for [email protected] postfix/master[4761]: warning: process /usr/lib/postfix/trivial-rewrite pid 5282 exit status 1 postfix/proxymap[4126]: warning: connect to mysql server 127.0.0.1: Can't connect to MySQL server on '127.0.0.1' (110) In mysql-domains.cf I'm using: Hosts 127.0.0.1 I can connect to MySQL with this: mysql -u postfixuser -p But I can't connect this way: mysql -u postfixuser -h 127.0.0.1 -p maildbname Also when I run netstat -l it comes back with: tcp 0 0 localhost:mysql *:* LISTEN I've tried changing my hosts to: Hosts localhost But then I just get a socket error: postfix/cleanup[4870]: warning: connect to mysql server localhost: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' I also have this set up in the MySQL config file: bind-address = 127.0.0.1 I'm sure I'm missing something obvious, but I am pretty new to all this. Thanks! Andy

  Read the article

• configure spam assassin to delete all spam above a score domain wide and override individual settin

  - by Marlon

  Okay, so this is my scenario and what I want to try and do. I maintain a Red Hat email server running qmail and spamassassin. I have a domain that has well over 100 email account each with individual settings for spam scores and, whether or not to delete email incoming mail deemed spam. What I want to accomplish is to change all those email email accounts to say a more stringent spam score value, AND to enable the deletion of email immediately as it flagged as such, for EACH AND EVERY email box. In short, I want to be able to override a user's individual settings spam settings, with my own. Short of tediously going into each and every email box one by one, is there an way to do this all in one fell swoop? Any advice would be greatly appreciated! :-)

  Read the article

• Sendmail background process sometimes processes queue, but sendmail -q always works

  - by markmcb

  I'm using sendmail version 8.14.4 on Fedora 15 to send email. My Rails app uses delayed_job to queue up emails. Messages will queue up in /var/spool/mqueue as expected, but don't always get processed. I can see the messages and sendmail is definitely running in the background. Restarting the process does nothing. However, when I issue the sendmail -q command, sendmail gets to work and starts sending. The really odd thing is that this behavior only occurs sometimes. Other times message queue up and are delivered as expected. I've tried tweaking various sendmail configs to reduce the time between queue processing (for example, adding define('confMIN_QUEUE_AGE', '0')dnl to /etc/mail/sendmail.mc), but nothing seems to do the trick. Any ideas what might be the root cause?

  Read the article

• 4.5.1 4.4.0 DNS Query Failed

  - by Justin

  We are running Exchange 2010 and lately I have noticed that some outgoing messages get stuck in the queue with the error "451 4.4.0 DNS Query Failed". On every domain that this happens on I have been able to use nslookup to find the MX record and open a connection to their server over SMTP so I am reasonably sure that this problem is on my end. My send connector isn't routing mail through a smart host nor is is set to use a different DNS server to do the lookup so I'm stumped as to why these messages aren't going out. Any ideas?

  Read the article

• I want to hide my email address when I send an email from a Lotus Notes Group Email [closed]

  - by Shaun Casey

  Possible Duplicate: How do I change the Respond To for Group Email adresses in Notes 6.5 When I send an email from a group mail box the email shows my email address as the sender. I would like to hide my email and only show my name. I am using Notes 6.5. Could you please advise if there is a way to set up my client to do this. I want this so the receiver responds to the group email not my personal email as it may be that I am not the one to do the fillow up to the response. There are 10 people in the group email.

  Read the article

• Apache2 Segfault - need help interpreting this coredump (suspect cause is memcache / php session related)

  - by WayneDV

  Three Apache2 web servers running a PHP 5.2.3 web site. We're using Memcache to cache rendered pages but also as the storage engine of the PHP Sessions. At peak traffic times we're getting Apache segmentation faults on all three web servers and all HTTPD child processes segfault. My gut tells me that the increased Memcache traffic is stopping PHP sessions from being created or cleaned up and thus the processes die. Is it possible for someone to confirm that from the following? : #0 _zend_mm_free_int (heap=0x7fb67a075820, p=0x7fb67a011538) at /usr/src/debug/php-5.3.3/Zend/zend_alloc.c:2018 #1 0x00007fb665d02e82 in mmc_buffer_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:50 #2 mmc_request_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:169 #3 0x00007fb665d031ea in mmc_pool_free (pool=0x7fb67a00e458) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:917 #4 0x00007fb665d0a2f1 in ps_close_memcache (mod_data=0x7fb66d625440) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_session.c:185 #5 0x00007fb66d1b0935 in php_session_save_current_state () at /usr/src/debug/php-5.3.3/ext/session/session.c:625 #6 php_session_flush () at /usr/src/debug/php-5.3.3/ext/session/session.c:1517 #7 0x00007fb66d1b0c1b in zm_deactivate_session (type=<value optimized out>, module_number=<value optimized out>) at /usr/src/debug/php-5.3.3/ext/session/session.c:2171 #8 0x00007fb66d2a719c in module_registry_cleanup (module=<value optimized out>) at /usr/src/debug/php-5.3.3/Zend/zend_API.c:2150 #9 0x00007fb66d2b1994 in zend_hash_reverse_apply (ht=0x7fb66d629d60, apply_func=0x7fb66d2a7180 <module_registry_cleanup>) at /usr/src/debug/php-5.3.3/Zend/zend_hash.c:755 #10 0x00007fb66d2a5c0d in zend_deactivate_modules () at /usr/src/debug/php-5.3.3/Zend/zend.c:866 #11 0x00007fb66d2541b5 in php_request_shutdown (dummy=<value optimized out>) at /usr/src/debug/php-5.3.3/main/main.c:1607 #12 0x00007fb66d32e037 in php_apache_request_dtor (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:509 #13 php_handler (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:681 #14 0x00007fb6784166f0 in ap_run_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:158 #15 0x00007fb678419f58 in ap_invoke_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:372 #16 0x00007fb6784254f0 in ap_process_request (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282 #17 0x00007fb678422418 in ap_process_http_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190 #18 0x00007fb67841e1b8 in ap_run_process_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/server/connection.c:43 #19 0x00007fb678429f4b in child_main (child_num_arg=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:662 #20 0x00007fb67842a21a in make_child (s=0x7fb679cd7860, slot=153) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:758 #21 0x00007fb67842aea4 in perform_idle_server_maintenance (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:893 #22 ap_mpm_run (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:1097 #23 0x00007fb678402890 in main (argc=1, argv=0x7fff6fecacb8) at /usr/src/debug/httpd-2.2.15/server/main.c:740 PHP.INI Follows: [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED display_errors = Off display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = Off variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 sendmail_path = /usr/sbin/sendmail -t -i mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [MySQL] mysql.allow_persistent = On mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_links = -1 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.save_path = "/var/lib/php/session" session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 1 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.entropy_file = session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 /etc/php.d/memcached.ini : session.save_path="tcp://memcache1:11211?persistent=1&weight=1&timeout=3&retry_interval=15"

  Read the article

• Using DateTime in a SqlParameter for Stored Procedure, format error

  - by Matt

  I'm trying to call a stored procedure (on a SQL 2005 server) from C#, .NET 2.0 using DateTime as a value to a SqlParameter. The SQL type in the stored procedure is 'datetime'. Executing the sproc from SQL Management Studio works fine. But everytime I call it from C# I get an error about the date format. When I run SQL Profiler to watch the calls, I then copy paste the exec call to see whats going on. These are my observations and notes about what I've attempted: 1) If I pass the DateTime in directly as a DateTime or converted to SqlDateTime, the field is surrounding by a PAIR of single quotes, such as @Date_Of_Birth=N''1/8/2009 8:06:17 PM'' 2) If I pass the DateTime in as a string, I only get the single quotes 3) Using SqlDateTime.ToSqlString() does not result in a UTC formatted datetime string (even after converting to universal time) 4) Using DateTime.ToString() does not result in a UTC formatted datetime string. 5) Manually setting the DbType for the SqlParameter to DateTime does not change the above observations. So, my questions then, is how on earth do I get C# to pass the properly formatted time in the SqlParameter? Surely this is a common use case, why is it so difficult to get working? I can't seem to convert DateTime to a string that is SQL compatable (e.g. '2009-01-08T08:22:45') EDIT RE: BFree, the code to actually execute the sproc is as follows: using (SqlCommand sprocCommand = new SqlCommand(sprocName)) { sprocCommand.Connection = transaction.Connection; sprocCommand.Transaction = transaction; sprocCommand.CommandType = System.Data.CommandType.StoredProcedure; sprocCommand.Parameters.AddRange(parameters.ToArray()); sprocCommand.ExecuteNonQuery(); } To go into more detail about what I have tried: parameters.Add(new SqlParameter("@Date_Of_Birth", DOB)); parameters.Add(new SqlParameter("@Date_Of_Birth", DOB.ToUniversalTime())); parameters.Add(new SqlParameter("@Date_Of_Birth", DOB.ToUniversalTime().ToString())); SqlParameter param = new SqlParameter("@Date_Of_Birth", System.Data.SqlDbType.DateTime); param.Value = DOB.ToUniversalTime(); parameters.Add(param); SqlParameter param = new SqlParameter("@Date_Of_Birth", SqlDbType.DateTime); param.Value = new SqlDateTime(DOB.ToUniversalTime()); parameters.Add(param); parameters.Add(new SqlParameter("@Date_Of_Birth", new SqlDateTime(DOB.ToUniversalTime()).ToSqlString())); Additional EDIT The one I thought most likely to work: SqlParameter param = new SqlParameter("@Date_Of_Birth", System.Data.SqlDbType.DateTime); param.Value = DOB; Results in this value in the exec call as seen in the SQL Profiler @Date_Of_Birth=''2009-01-08 15:08:21:813'' If I modify this to be @Date_Of_Birth='2009-01-08T15:08:21' It works, but it won't parse with pair of single quotes, and it wont convert to a datetime correctly with the space between the date and time and with the milliseconds on the end. Update and Success First and foremost, thank you everyone for the answers. I post this for the sake of completeness and accuracy on SO - because I certainly do not do it for my pride... I had copy/pasted the code above after the request from below. I trimmed things here and there to be concise. Turns out my problem was in the code I left out, which I'm sure any one of you would have spotted in an instant. I had wrapped my sproc calls inside a transaction. Turns out that I was simply not doing transaction.Commit()!!!!! I'm ashamed to say it, but there you have it. I still don't know what's going on with the syntax I get back from the profiler. A coworker watched with his own instance of the profiler from his computer, and it returned proper syntax. Watching the very SAME executions from my profiler showed the incorrect syntax. It acted as a red-herring, making me believe there was a query syntax problem instead of the much more simple and true answer, which was that I need to commit the transaction! I marked an answer below as correct, and threw in some up-votes on others because they did, after all, answer the question, even if they didn't fix my specific (brain lapse) issue. Thanks again for the help.

  Read the article

• Determine which active directory object is referred to by GUID in a Directory Synchronization Error Report

  - by Michael Shimmins

  We have active directory syncronization setup between our on-premises AD server and Microsoft hosted Exchange (business productivity online services). I've started getting a daily error report, which details an error for a specific AD user, however it references it by GUID. I can't find any info on how to translate that object guid into something meaningful so I can find and fix the problem. The error is reported as: Error 005: Unable to set the alias for this object in Microsoft Online Services because either the primary SMTP address, the e-mail nickname, or the SAM account name in the local Active Directory contains an invalid character. in reference to the Object GUID: CN={8443cbb4-5199-49f0-9529-ce965430dca6} How can I translate that object guid into a friendly object name?

  Read the article

• SBS2003 OWA not displaying images on external side

  - by JasonC

  I've got an SBS 2003 server with companyweb/remote owa site. After authenticating remotely to the https:/servername/remote site, and then clicking on Use Outlook Web Access, the mail/owa site displays only limited amounts of data with Loading... displayed (see first image). This is different when viewing the site on the server itself (see second image). Different browsers will display different types of data (last screenshot is Chrome - first two are IE). I feel IIS permissions on the virtual directories is the cause, but not certain. Forms-based authentication etc is working ok etc. Any suggestions? Authentication and getting email via ActiveSync is not a problem. I don't want to break anything, and it's not a major problem because the users only get their email via outlook and iphones anyway without problems. I'm more interested in finding out for my own info so please give me some suggestions to try. Thanks for looking!

  Read the article

• AutoComplete not working in Outlook 2007

  - by studiohack23

  When I go to create a new message in Outlook 2007, and I start typing the first few characters of a contact's name, no suggestions appear. I've just added all my contacts from a .csv file that was exported from Yahoo! Mail. If I type the name out, then click 'send', then it will ask me which of the contact's emails to send it to if the contact has multiple addresses. I've looked in the advanced options to make sure AutoComplete is on, which it its. What is going on? Thanks!

  Read the article

• Exchange 2007 ignoring Send Connectors (again)

  - by gravyface

  Wow, I'm at a loss here -- I posted this exact same question a while back and it's doing the exact same thing: my Send Connector I've created for "Microsoft Domains" (hotmail.com cost 1) is being ignored again and routed through the "Default" Send Connector (* cost 10). Last time, I had the same cost for both Send Connectors, but I've tried setting the Default connector to 5, 10, 100, etc. and regardless, all mail gets routed through that connector (which smarthosts through Postini). Besides calling an air strike on Redmond, what else can I do? MS is blocking Postini again, need to get this working permanently.

  Read the article

• Using Google Talk with a non-apps, non-gmail Google account

  - by rymo

  I created a Google account with an existing e-mail address from a domain that is NOT hosted by Google. This address is not on an Apps domain and has no gmail service of any kind. Still I am able to add it as a Google account on an Android device with no problem. If the device is running Jelly Bean (where the Google Talk app allows switching between accounts) I can sign in and chat works fine. I can also sign into Talk with this account via the iGoogle home page. Now how can I use this account with a standalone chat client like iChat, Pidgin, or Empathy? It doesn't seem to work with login ID [email protected] using SSL to connect to server talk.google.com (tried ports 5222 and 5223). Are iGoogle and Android doing something magical that no other Jabber client is allowed, or am I just missing a step?

  Read the article

• Linux IPTables / routing issue

  - by Jon

  Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

  Read the article

• Why does my macbook pro have long ping times over wifi?

  - by randynov

  I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

  Read the article

• Best solution for Multi-WAN failover (inside & out)?

  - by Sean O

  Looking for a way to setup 2 ISPs in failover mode, for both incoming & outgoing traffic, for our small (<100 devices) network. The leading contender for now seems to be the Peplink Balance 310. However, a reseller I spoke with said it's great for 100% outgoing connectivity, but didn't seem to be confident in its abilities to handle incoming traffic. This is important as we host our own web site, Exchange e-mail, and virtual desktops (RDP). Do any Peplink owners use this for failover of incoming traffic? Are there other devices I should be considering? We're currently using a Cisco 1800 series router & ASA 5500 series firewall, with Comcast & T-1 lines (the goal being to replace the T with DSL/FiOS {whenever that becomes availble}). Price range: ~$1000 - $2500 USD. Thanks.

  Read the article

• How do I use an include statement in a TXT record?

  - by Aglystas

  We have a client that is using an email service that requires a TXT domain key reocrd that is over 127 characters long. I'm pretty sure BIND allows this, however we run djbdns with tinydns and it looks as though it only supports txt records up to 127 characters. And the rest is being truncated. I was thinking I can do an include combining them, but I'm not really sure how. I was thinking of setting the value to somthing like... v=DKIM1; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC2GWCNaDTuC3include:bdk2._domainkey.mail.cutlerymania.com My thought is, will this grab the actual value located at that domain which only has one record which is a TXT record and simply append that information so the entire key record gets sent correctly?

  Read the article

• SMTP Relay through exchange

  - by John

  Hi guys, We have a bit of a problem in that we want our printers to email our contractor whenever they develop a fault. The problem is on our corporate network we have no access through the firewall to the internet preventing us to use the external SMTP server. So i suppose the question is can we use our exchange server to do this? IE could I run an SMTP service that would forward to the exchange server which would then send the mail to the contractor? Any ideas welcome! Thanks John

  Read the article

• My IIS server won't serve SSL sites to some browsers

  - by sbleon

  (Update: This is now cross-posted at http://stackoverflow.com/questions/3355000. This is the more appropriate forum, but StackOverflow gets a lot more traffic.) I've got an IIS 6.0 server that won't serve pages over SSL to some browsers. In Webkit-based browsers on OS X 10.6, I can't load pages at all. In MSIE 8 on Windows XP SP3, I can load pages, but it will sometimes hang downloading images or sending POSTs. Working: Firefox 3.6 (OS X + Windows) Chrome (Windows) Partially Working: MSIE 8 (works sometimes, but hangs up, especially on POSTs) Not Working: Chrome 5 (OS X) Safari 5 (OS X) Mobile Safari (iOS 4) On OS X (the easiest platform for me to test on), Chrome and Firefox both negotiate the same TLS Cipher, but Chrome hangs on or after the post-negotiation handshake. Chrome packet capture (via ssldump): 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 cipher suites Unknown value 0xc00a Unknown value 0xc009 Unknown value 0xc007 Unknown value 0xc008 Unknown value 0xc013 Unknown value 0xc014 Unknown value 0xc011 Unknown value 0xc012 Unknown value 0xc004 Unknown value 0xc005 Unknown value 0xc002 Unknown value 0xc003 Unknown value 0xc00e Unknown value 0xc00f Unknown value 0xc00c Unknown value 0xc00d Unknown value 0x2f TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 Unknown value 0x35 TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x32 Unknown value 0x33 Unknown value 0x38 Unknown value 0x39 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.3106 (0.2620) S>C Handshake ServerHello Version 3.1 session_id[32]= bb 0e 00 00 7a 7e 07 50 5e 78 48 cf 43 5a f7 4d d2 ed 72 8f ff 1d 9e 74 66 74 03 b3 bb 92 8d eb cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL Certificate ServerHelloDone 1 3 0.3196 (0.0090) C>S Handshake ClientKeyExchange 1 4 0.3197 (0.0000) C>S ChangeCipherSpec 1 5 0.3197 (0.0000) C>S Handshake [hang, no more data transmitted] Firefox packet capture: 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 resume [32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipher suites Unknown value 0xff Unknown value 0xc00a Unknown value 0xc014 Unknown value 0x88 Unknown value 0x87 Unknown value 0x39 Unknown value 0x38 Unknown value 0xc00f Unknown value 0xc005 Unknown value 0x84 Unknown value 0x35 Unknown value 0xc007 Unknown value 0xc009 Unknown value 0xc011 Unknown value 0xc013 Unknown value 0x45 Unknown value 0x44 Unknown value 0x33 Unknown value 0x32 Unknown value 0xc00c Unknown value 0xc00e Unknown value 0xc002 Unknown value 0xc004 Unknown value 0x96 Unknown value 0x41 TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA Unknown value 0x2f Unknown value 0xc008 Unknown value 0xc012 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA Unknown value 0xc00d Unknown value 0xc003 Unknown value 0xfeff TLS_RSA_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.0983 (0.0497) S>C Handshake ServerHello Version 3.1 session_id[32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL 1 3 0.0983 (0.0000) S>C ChangeCipherSpec 1 4 0.0983 (0.0000) S>C Handshake 1 5 0.1019 (0.0035) C>S ChangeCipherSpec 1 6 0.1019 (0.0000) C>S Handshake 1 7 0.1019 (0.0000) C>S application_data 1 8 0.2460 (0.1440) S>C application_data 1 9 0.3108 (0.0648) S>C application_data 1 10 0.3650 (0.0542) S>C application_data 1 11 0.4188 (0.0537) S>C application_data 1 12 0.4580 (0.0392) S>C application_data 1 13 0.4831 (0.0251) S>C application_data [etc] Update: Here's a Wireshark capture from the server end. What's going on with those two much-delayed RST packets? Is that just IIS terminating what it perceives as a non-responsive connection? 19 10.129450 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=3 TSV=699250189 TSER=0 20 10.129517 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1460 WS=0 TSV=0 TSER=0 21 10.168596 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSV=699250189 TSER=0 22 10.172950 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Hello 23 10.173267 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 24 10.173297 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 25 10.385180 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=2897 Win=524280 Len=0 TSV=699250191 TSER=163006 26 10.385235 10.100.xxx.xx 67.249.xxx.xxx TLSv1 Server Hello, Certificate, Server Hello Done 27 10.424682 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=4215 Win=524280 Len=0 TSV=699250192 TSER=163008 28 10.435245 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Key Exchange 29 10.438522 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Change Cipher Spec 30 10.438553 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=421 Win=65115 Len=0 TSV=163008 TSER=699250192 31 10.449036 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Encrypted Handshake Message 32 10.580652 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=458 Win=65078 Len=0 TSV=163010 TSER=699250192 7312 57.315338 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50644 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0 19531 142.316425 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [RST, ACK] Seq=4215 Ack=458 Win=0 Len=0

  Read the article

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Recommended SpamAssassin update channels?

  - by Timo Geusch

  I'm currently using SpamAssassin on a couple of mail servers that I look after. SpamAssassin runs in the context of amavisd-new on those servers and with the usual bunch of plugins (FuzzyOCR, DCC, pyzor, razor). Currently the servers are getting their rule updates from the default SpamAssassin update channel (updates.spamassassin.org). Overall the setup seems to be reasonably effective but some types of spam seem to wander right through it even though I've made repeated attempts at training spamassassin. My guesstimate is that about 85%-90% of the spam that gets through policyd-weight makes it through the filters and it's been getting a lot worse recently as spammers are getting better at working their way through filters. Can someone recommend additional sources of filters to make SpamAssassin more effective? So far I've found OpenProtect's update channel but are there others worth looking at?

  Read the article

• Mac OS X Update 10.6.8 weird phishing behaviour

  - by Carlos

  I just updated to Mac App Store 1.0.2 with the update to 10.6.8. The Mac App Store said I have one update available, for Angry Birds.... I do not have Angry Birds on my system, but when I clicked the update button I got the following message. "You have updates available for other accounts. Sign in to [email protected] to update applications for that account." Needless to say this account does not exist. Any ideas what this is all about?

  Read the article

• How to enable catch-all email in iRedMail Open Source edition?

  - by Matthias

  How to create catch-all email alias for domain in iRedMail Open Source edition? I know that's possible via LDAP and found the following instructions: http://iredmail.org/wiki/index.php?title=Addition/OpenLDAP/Catch-all The problem is how exactly to add this parameters via phpLDAPAdmin? I select "Create new entry here" and choose mailUser type. Then in step 2 first question is about "RDN" with select box "select RDN attribute". What should I choose as RDN? Which fields of the "Create Object" form should be filled? Unfortunetly there is completely no validation of user input and final errors does not contain explanation what's wrong Also when I try to import example from iredmail wiki phpldapadmin it gives LDIF Import Parse Error Description: A valid dn line is required [] dn line is: dn: [email protected],ou=Users,domainName=mydomain.eu,o=domains,dc=myserver,dc=pl

  Read the article

• Configure Apple Mobile Access Server for iPhones, iPads and Macs

  - by Studer

  I successfully configured Mobile Access Server on Mac OS X Server 10.6, but now, how do I configure Macs, iPhones and iPads I'm in charge of ? How can these machines access all the services provided by the Mobile Access Server ? I can't find anything useful on the web concerning the client setup. Is there any '1-click configuration' that would setup iCal, Addresses and Mail at once on a machine like the MobileMe setup does ? Or do I have to manually configure each services on each machines ? I gave a look at the iPhone Configuration Utility but it cannot configure Macs, obviously.

  Read the article

• Crontab script on Mac OS X Lion does not work anymore

  - by Nopster

  I have a problem with cron tasks. Previously this script worked fine on Mac OS X 10.6 server, but when I initialize it on Lion (client), this script stopped working. Basically, this .bat file calls a jar file (that invokes a loop of mysqldump commands) to backup several databases on several servers, and runs perfectly if launched by the shell. cd /Users/nameoftheuser/Desktop/backupper /usr/bin/java -cp .:Backupper.jar:lib/mail.jar backupper.Main "/Users/nameoftheuser/Desktop/backupper/listasiti.txt" "/Users/nameofthe/Desktop/backupper/config.properties But if the cron launches the same .bat file, the generated database backups are 0 bytes. The cron entry is: 0 0 sh /Users/path/to/file.bat I believe that the problem is that cron doesn't run as root. Or what else?

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >