Search Results

Search found 10673 results on 427 pages for 'recovery disk'.

Page 318/427 | < Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >

• ISCSI: Ethernet cable maximum length vs. SCSI command timeout

  - by Jeremy Hajek

  I have a question about a non-optimal setup and the practical implications of this. Ideally you would place the ESXi server right in the same room as the FreeNas white box end of question. My situation is this: I have a run of ~125ft of Cat 5e connecting a ESXi server to a FreeNas whitebox in the server room. I know the distance of the ethernet cable is within the maximum distance for ethernet traffic but I have two questions... Can Cat 5e support gigbit speeds at that distance if the switch on the back end is a linksys SRW-2048? Should I be concerned about the distance causing data read and write timeouts in the SCSI portion--(disk operations of the ESXi)?

  Read the article

• Dropped Dell XPS has hard-drive trouble

  - by Alex B.

  Yesterday, my mom dropped her laptop to the floor and got the blue screen of death after trying to boot the system. I was able to start a Fedora live CD and get some of her stuff off the hard drive, but I cannot seem to be able to install Windows on it. The installation starts loading files and then the computer turns off. I am thinking that she might need a new hard drive. Any ideas? Edit: I actually was able to boot the Windows XP installation but it is saying that no hard disk is detected. How can this be possible if I was able to mount the drive on fedora yesterday?

  Read the article

• Dual HDD dual boot Win7/Win7 hibernate corrupts partitions?

  - by Ivan Zlatev

  I have two SSDs in my laptop. Both have 2 partitions each one with Windows 7 64bit and another one with OEM stuff on it (SYSTEM_DRV). I use the BIOS boot menu to boot between the drives. I have removed the drive letters so that no partitions of drive 1 are mapped in windows 2 on drive 2 and wise-versa. What I have observered however is that when I hibernate windows 1, boot windows 2 do some work and shutdown then resume windows 1 - the windows 2 partition will get corrupt quite often. Just happened actually - it is shown as "RAW" in the Disk manager instead of NTFS and windows will blue screen at boot. Alternatively I've seen cases where chkdsk will run and will wipe out all security descriptors making the partition completly unbootable. Why am I seeing these corruptions and what can I do to prevent them?

  Read the article

• High Lock Wait ratio in MySQL

  - by FunkyChicken

  on my site I log every pageview (date,ip,referrer,page,etc) in a simple mysql table. This table gets very little selects (3 per minute), but a lot of inserts. (about 100 per second) Today I changed this table from an InnoDB table to a MEMORY table, this made sense to me to prevent unnecessary hard disk IO. I also prune this table once per minute, to make sure it never get's too big. -- Performance wise, things are running fine. But I noticed that while running tuning-primer, that my Current Lock Wait ratio is quite high. Current Lock Wait ratio = 1 : 561 My question: Should I worry about this Lock Wait Ratio? And is there something I can change in my my.cnf to improve things so that the lock wait ratio isn't so high?

  Read the article

• How can I combine non-identical disks efficiently?

  - by Odys

  There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

  Read the article

• Flash drive doesn't mount on mac

  - by Doug Harris

  I've got two different USB flash drives which are formatted MS-DOS(FAT-16). When I plug each into my MacBook Pro (running MacOS 10.6 - Snow Leopard), they don't mount. I can see them using Disk Utility. When I run an Ubuntu VM inside of VMWare Fusion, Ubuntu has no trouble mounting these either. I've tested with the drives plugged directly into the machine and plugged into a usb hub -- both give the same results. Is there a setting I've inadvertently set which disables automounting? Is there an issue with mounting FAT-16 drives?

  Read the article

• How long do uploaded files stay in the tmp folder in Linux Ubuntu?

  - by Jean-Nicolas Boulay Desjardins

  I am building a web application where my users will be able to upload files. After the files are uploaded I need to send the files to two other servers, and after they will be deleted from the server where they were just uploaded to. I am wandering is it a good I idea to keep the uploaded files in the tmp/ folder the time the uploaded files are sent to the other two servers or should I move them to another folder incase they get deleted? I am also wandering because I would like to know if I have to build a cron script to get rid of the files that have been transfered to the other servers so that I get my disk space back.

  Read the article

• Windows undetectable after interrupted chkdsk

  - by Felthragar

  I have a computer that is running Windows XP. For some reason, the other day it wouldn't start giving me the following message: "ntoskrnl.exe is missing or corrupt" So I put the XP disc in the tray and fired up the repair console and ran the following: chkdsk /r It was on for about eight hours and it got to about 52% I believe. Then there was a power outage and the computer shut down (obviously). Today when I was booting it, it isn't even detecting there's an OS anymore. If I boot the computer with no cd in the tray it says: "Reboot and select a proper Boot device or Insert Boot Media in selected Boot device and press a key" If I run the repair console, or the xp installation program it isn't finding any OS installations. Any ideas on what to do next? Any help is appreciated. Thanks! Update: After turning boot-time diagnostics on, I got this message when booting without cd (instead of the previous one): "Couldn't open drive multi(0)disk(0)rdisk(0)partition(2)"

  Read the article

• Looking for a good Web Server that is cheap

  - by SoLoGHoST

  I am a Project Manager, and former Lead Developer for a software portal system that requires a forum software to run. I am in need of a server that is cheap, reliable, and supports the latest PHP (5.2+), MySQL, unlimited e-mails (preferably), a cPanel, multiple sub-domains (atleast 3+). Currently I am paying $34.95 USD/month (approx. $420 USD/year). This is too high for me to pay to keep the site running. I just recently became Project Manager and in charge of Finances and I'm extremely concerned for the future of Dream Portal. With those prices I'm not sure I'll be able to keep it running for too long. Can someone please tell me of a good server that meets all of the requirements that I listed above that is cheaper on a yearly basis? Note: Currently on a Dedicated Server with limited disk space at 15000 MB (15 GB), monthly bandwidth = 500000 MB, 50 emails limit, 20 sub-domains limit, 30 FTP accts., and 25 SQL Databases.

  Read the article

• Ubuntu dual boot and grub error 18

  - by srboisvert

  I've attempted to install 9.04 on an older toshiba laptop with a new 300GB drive and am getting the dreaded Grub error 18 that indicates that grub is looking beyond the bios readable area of the HD and failing. I just let ubuntu roll with its default selections when installing and ended up with this: Drive layout /dev/sda1 -ntfs 128GB -boot /dev/sda2 -extended 170GB -lba /dev/sda5 -ntfs 167.59GB /dev/sda6 -ext3 2.33GB /dev/sda7 -linux-swap 172MB I'd like make the system dual bootable without having to reinstall windows (real pain since I would have to go through an obstructionist IT dept). I know I can make windows bootable with a rescue disk and fixmbr but is there something I can do to make it dual bootable using the ubuntu livecd? Alternately, what should I have done at the partition stage of ubuntu installation to avoid this?

  Read the article

• Pervasive database backup

  - by Steven

  I'm looking for the best way to backup my pervasive database. I've read the documentation but still have a few questions. It appears that Continuous Operations method only allows me to backup the entire database? So I'd do butil -startbu @filelist, then backup the entire database (copy, rsync, etc), then run butil -endbu @filelist. Looking through the documentation I don't see a way to get transaction logs out of this method; like I would do for MSSQL (BACKUP LOG ACCT TO DISK) or Postgres (archive_command). With rsync, it might be feasible to still do this every 15 minutes. The Archival Logging method means I would have to occasionally stop the database to get a full backup, which is acceptable for me. But can I copy the log files off of the server every 15 minutes, ie log shipping? Thank you.

  Read the article

• Intermittent USB 3.0 access - How do I troubleshoot?

  - by Billy ONeal

  I've got a WD Passport hard disk with "superspeed" USB 3.0 support. When I use my USB 3.0 flash drive (this is a Lenovo X220 laptop), USB 3.0 consistently works. But when I use the passport drive, almost without fail the connection drops to USB 2.0. Touching the cable seems to immediately trigger the problem, but it seems to happen on its own though. I've got another cable on order right now... but is it likely the cable's the issue here? Is there anything else I can check?

  Read the article

• mounting vsphere 4.0 file system in ubuntu linux

  - by sravan

  hi all, I am using VSpere 4.0 for my project work. I needed 4-5 servers my project work which is based on Database. I felt the virtualisation is very good to get the 5 servers running good at the same time. It was running good until few days back. Yesterday, it suddenly crashed and i had no idea of the reason.Today, it did not even boot up. Now, i need to take the data backup from that system. In order to do the same, i got the hard drive from the machine and tried to mount it on local linux machine.But, i was not successful. The disk was not even recognized by the linux machine. Can some one please tell me how to mount it and get the required data? Thank you all

  Read the article

• Possible to use DRBD on two ESXi virtualized servers?

  - by chen

  I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

  Read the article

• Lost Page Write I/O Errors on CentOS LVM setup

  - by Gregg Leventhal

  I have a CentOS 6 box with LVM setup and one of the PVs is a USB disk (I know). One of them is getting the error: Oct 30 10:57:07 alpha01 kernel: lost page write due to I/O error on dm-3 Oct 30 10:57:07 alpha01 kernel: Buffer I/O error on device dm-3, logical block 4 Which is causing problems with all of the LVs on it. pvs shows the PV as unknown device. I can ls to the logical volumes and they show up in lvdisplay, but first I get a bunch of IO errors. I made sure the cables are secure between the USB drive. What should I do to get this back up and running for the meanwhile? Should I unmount each LV and run an fsck.ext4 on each one like fsck.ext4 -y /dev/vg1/lv_logvolname ?

  Read the article

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Resizing a System Partition Windows Server 2003 VM (Getting GParted Error)

  - by Dina

  I am getting an error while trying to resize System Partition for Windows 2003 Server (this is a VM on a Hyper-v Windows Server 2008) using GParted Live CD ISO. Followed this tutorial: http://malaysiavm.com/blog/how-to-resize-windows-2003-server-virtual-disk-on-vmware-esx/ and GParted Doc http://gparted.sourceforge.net/larry/resize/resizing.htm (They are very similar) The VM has a Dynamic VHD file, I have already increased it using Hyper-v. GParted doesn't give any clues or details for the error. Just simply errors when trying to grow the partition. Any ideas what I can do? Thanks! Using version of Gparted: gparted-live-0.13.1-2

  Read the article

• SFTP through proxy

  - by aerodynamic_props

  I have a large amount of data on scratch space at computer b that I want to get. In my network I cannot directly connect to computer b (ssh exits with "No route to host"); I must first connect to computer a, and then connect to computer b. I cannot move the data from the scratch space on computer b to computer a because of a disk quota that is imposed on me at computer a. How can I move the data from computer b to my computer in this situation?

  Read the article

• Ubuntu server: lost prompt on monitor

  - by Richard

  Hello All, I am running Ubuntu 9.04 server edition. I have a monitor plugged into the box for occasional admin tasks. I pulled out a USB disk (without unmounting) and the screen is now full with this message: Buffer I/O error on device sdc1, logical block 7778778 I can't seem to clear the screen or get a prompt back. Doesn't appear to be registering keyboard strokes. The box is still running fine (I can ssh in from elsewhere and evrything is running as normal). Any ideas on how to clear screen and get my prompt back?

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• How can I diagnose cache misses when using Apache as a reverse proxy?

  - by johnstok

  I have set up Apache 2.2 as a reverse proxy with the following configuration: # jBoss proxying ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /foo http://localhost:9080/foo ProxyPassReverse /foo http://localhost:9080/foo ProxyPassReverseCookiePath /foo /foo # Reverse proxy caching CacheEnable disk /foo # Compression SetOutputFilter DEFLATE BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE\s(7|8) !no-gzip !gzip-only-text/html DeflateCompressionLevel 9 Header append Vary User-Agent env=!dont-vary However, in a number of cases where I expect a cached response to be returned the request is sent through to the origin server at localhost:9080. Responses have a HTTP Vary header of 'Accept-Encoding,User-Agent' which is to be expected given the mod_deflate configuration. How can I determine why Apache is unable to serve a response from the cache?

  Read the article

• Disable RAID Controller

  - by B.Mr.W.

  I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

• Unix tool for splitting archives

  - by Richo

  I'm dumping an svn repository to a giant USB disk that is formatted FAT due to necessity (treat this as unchangeable). It conks out when you try to create a file larger than 4 gb. I need a tool that I can pipe data to that will create files of arbitrary size that when catted together will be the original file. I can write a tool to do this, but if one already exists I'd rather use it. Cheers EDIT: A second look at the split man page looks like it might work.

  Read the article

< Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >