Search Results

Search found 9557 results on 383 pages for 'x86 64'.

Page 318/383 | < Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >

• File/printer sharing issues on network with multiple OSes

  - by DanZ

  My workplace consists of computers running a variety of different operating systems, and I have been running into problems getting some of them to connect to a shared drive and printer over the network. Here is a brief description of the computers involved and the issues I have encountered: 1: Dell desktop, Windows Vista Business-- This is the computer I want the others to connect to. It has a USB printer and eSATA hard drive enclosure that I have set up for sharing, with different accounts for the various users. 2: Fujitsu laptop, Windows XP Tablet edition-- No problems. Can connect to both the shared printer and hard drive. 3: Lenovo laptop, Windows Vista Business 64 bit-- No problems. Can connect to both the shared printer and drive. 4: Apple MacBook, OS 10.4-- Can connect to the shared drive, but not to the shared printer. I am aware that the printer issue is due to a known incompatibility between Vista and OS 10.4 and earlier with regards to Samba. It is not a big problem, however, as this computer can access a network printer. 5: Sony laptop, Windows Vista Home Premium-- Can connect to the shared printer, but not the shared drive. It can see computer 1 and its shared drive on the network, and appears to successfully log in to user accounts. However, if you try to access the shared drive, it says you do not have permission. I have tried both standard and administrator accounts, and none can access the drive from this computer. 6: MacBook Pro, OS 10.5 (there are two of these)-- Can connect to the shared printer, but not the shared drive. They can't see computer 1 on the network. For that matter, they also can't see each other or the older Mac, but can see and access shared folders on the XP machine (computer 2) and can see other PCs in the building. I was able to add the shared printer manually by typing in its network location, but was unable to manually add the shared drive in the same way. So, what I am looking for is suggestions on how to get computers 5 and 6 to connect to the shared drive. Since they can already connect to the shared printer (which is on the same computer as the shared drive), it seems reasonable that they should be able to access the drive as well.

  Read the article

• Apache server in raspberry PI not visible from outside( public IP)

  - by Kronos

  I have made a fresh install of Arch Linux ARM into a Raspberry PI and I mounted there a LAMP, all fresh. I have another Arch(x86) in my laptop with Apache also there, and as far as I know, two web servers cannot run in the same network segment so, the problem is as follows. I my laptop, having Apache running, if I enter via the public ip of my network everything turns ok and I can see my website but, (obviously turning this server down) if I enter from the public IP with the Apache running in the raspberry pi( yes, only that Apache running) i cannot see my website in there. Also, if I access via local network it is a normal success, I can see my website. So, I can enter my raspberry website only via local but in my other web server i can enter it via local and public. I have the same conf files in both of them so what is the difference? I was planning in making the rpi as a development server. Thanks in advance

  Read the article

• Multiple PXE boots on the same subnet for RIS and WDS

  - by Tim

  We are looking to migrate off our existing server 2003 sp2 machine, running RIS (which I know is WDS as of Server 2003 Sp2, but to be clear..) with a bunch of legacy RiSETUP images to a Server 2008 r2 box. Because the change in architecture (x86 to x64), and a limitation of the Server 2008 upgrade path that won't allow mixed-mode WDS services to be upgraded, I am forced to look at running Server 2003 for RIS and Server 2008 R2 for WDS for Windows 7 on the same network. The problem I'm facing is how to deal with both PXE services at the same time? I'd still like the existing RIS server to be available for production use, but start working on WDS for deploying Windows 7. Is there a way to have a sort of PXE "chooser" ? Or some other mechanism to be able to select which server the client should download the boot image from? Thanks!

  Read the article

• How low-power can a home server get?

  - by Halik

  I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

  Read the article

• Download - Upload is too slow on Centos

  - by Mehdi

  My download/upload in server and out of server is too slow (around 50 KB/s !) ! Did I miss some configuration ? Some information: CentOS release 6.3 uptime load average: 0.17, 0.32, 0.37 Memory free -m total used free shared buffers cached Mem: 24009 21988 2021 0 806 18098 -/+ buffers/cache: 3083 20926 Swap: 4095 28 4067 lshw -C network *-network description: Ethernet interface product: 82574L Gigabit Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 00 serial: 00:25:90:70:17:4a size: 100MB/s capacity: 1GB/s width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=off broadcast=yes driver=e1000e driverversion=1.9.5-k duplex=full firmware=2.1-2 ip=108.175.8.123 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:16 memory:fb900000-fb91ffff ioport:e000(size=32) memory:fb920000-fb923fff ethtool ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: yes dmesg |grep e1000e dmesg |grep e1000e e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 33 for MSI/MSI-X e1000e 0000:02:00.0: irq 34 for MSI/MSI-X e1000e 0000:02:00.0: irq 35 for MSI/MSI-X e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:70:17:4a e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: Unsupported Speed/Duplex configuration e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: Disabling ASPM L1 e1000e 0000:02:00.0: eth0: changing MTU from 1500 to 9000 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• Proxy / Squid 2.7 / Debian Wheezy 6.7 / lots of TCP Timed-out

  - by Maroon Ibrahim

  i'm facing a lot of TCP timed-out on a busy cache server and here below my sysctl.conf configuration as well as an output of "netstat -st" Kernel 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3 x86_64 GNU/Linux Any advice or help would be highly appreciated #################### Sysctl.conf cat /etc/sysctl.conf net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_tw_recycle = 1 fs.file-max = 65536 net.ipv4.tcp_low_latency = 1 net.core.wmem_max = 8388608 net.core.rmem_max = 8388608 net.ipv4.ip_local_port_range = 1024 65000 fs.aio-max-nr = 131072 net.ipv4.tcp_fin_timeout = 10 net.ipv4.tcp_keepalive_time = 60 net.ipv4.tcp_keepalive_intvl = 10 net.ipv4.tcp_keepalive_probes = 3 kernel.threads-max = 131072 kernel.msgmax = 32768 kernel.msgmni = 64 kernel.msgmnb = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 net.ipv4.ip_forward = 1 net.ipv4.tcp_timestamps = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_sack = 0 net.ipv4.tcp_syncookies = 1 net.ipv4.ip_dynaddr = 1 vm.swappiness = 0 vm.drop_caches = 3 net.ipv4.tcp_moderate_rcvbuf = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_ecn = 0 net.ipv4.tcp_max_orphans = 131072 net.ipv4.tcp_orphan_retries = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.tcp_max_syn_backlog = 32768 net.core.netdev_max_backlog = 131072 net.ipv4.tcp_mem = 6085248 16227328 67108864 net.ipv4.tcp_wmem = 4096 131072 33554432 net.ipv4.tcp_rmem = 4096 174760 33554432 net.core.rmem_default = 33554432 net.core.rmem_max = 33554432 net.core.wmem_default = 33554432 net.core.wmem_max = 33554432 net.core.somaxconn = 10000 # ################ Netstat results /# netstat -st IcmpMsg: InType0: 2 InType3: 233754 InType8: 56251 InType11: 23192 OutType0: 56251 OutType3: 437 OutType8: 4 Tcp: 20680741 active connections openings 63642431 passive connection openings 1126690 failed connection attempts 2093143 connection resets received 13059 connections established 2649651696 segments received 2195445642 segments send out 183401499 segments retransmited 38299 bad segments received. 14648899 resets sent UdpLite: TcpExt: 507 SYN cookies sent 178 SYN cookies received 1376771 invalid SYN cookies received 1014577 resets received for embryonic SYN_RECV sockets 4530970 packets pruned from receive queue because of socket buffer overrun 7233 packets pruned from receive queue 688 packets dropped from out-of-order queue because of socket buffer overrun 12445 ICMP packets dropped because they were out-of-window 446 ICMP packets dropped because socket was locked 33812202 TCP sockets finished time wait in fast timer 622 TCP sockets finished time wait in slow timer 573656 packets rejects in established connections because of timestamp 133357718 delayed acks sent 23593 delayed acks further delayed because of locked socket Quick ack mode was activated 21288857 times 839 times the listen queue of a socket overflowed 839 SYNs to LISTEN sockets dropped 41 packets directly queued to recvmsg prequeue. 79166 bytes directly in process context from backlog 24 bytes directly received in process context from prequeue 2713742130 packet headers predicted 84 packets header predicted and directly queued to user 1925423249 acknowledgments not containing data payload received 877898013 predicted acknowledgments 16449673 times recovered from packet loss due to fast retransmit 17687820 times recovered from packet loss by selective acknowledgements 5047 bad SACK blocks received Detected reordering 11 times using FACK Detected reordering 1778091 times using SACK Detected reordering 97955 times using reno fast retransmit Detected reordering 280414 times using time stamp 839369 congestion windows fully recovered without slow start 4173098 congestion windows partially recovered using Hoe heuristic 305254 congestion windows recovered without slow start by DSACK 933682 congestion windows recovered without slow start after partial ack 77828 TCP data loss events TCPLostRetransmit: 5066 2618430 timeouts after reno fast retransmit 2927294 timeouts after SACK recovery 3059394 timeouts in loss state 75953830 fast retransmits 11929429 forward retransmits 51963833 retransmits in slow start 19418337 other TCP timeouts 2330398 classic Reno fast retransmits failed 2177787 SACK retransmits failed 742371590 packets collapsed in receive queue due to low socket buffer 13595689 DSACKs sent for old packets 50523 DSACKs sent for out of order packets 4658236 DSACKs received 175441 DSACKs for out of order packets received 880664 connections reset due to unexpected data 346356 connections reset due to early user close 2364841 connections aborted due to timeout TCPSACKDiscard: 1590 TCPDSACKIgnoredOld: 241849 TCPDSACKIgnoredNoUndo: 1636687 TCPSpuriousRTOs: 766073 TCPSackShifted: 74562088 TCPSackMerged: 169015212 TCPSackShiftFallback: 78391303 TCPBacklogDrop: 29 TCPReqQFullDoCookies: 507 TCPChallengeACK: 424921 TCPSYNChallenge: 170388 IpExt: InBcastPkts: 351510 InOctets: -609466797 OutOctets: -1057794685 InBcastOctets: 75631402 #

  Read the article

• Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

  - by valter

  Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• Can't create a valid symlink under VMWare HGFS

  - by Alexander Gladysh

  Host: OS X 10.6.5 VMWare Fusion: 3.1.2 Guest: Ubuntu x86 10.10 $ uname -a Linux ubuntu 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux I can not create a symlink, readable from the Guest OS anywhere in the directory, mounted with hgfs: /mnt/hgfs/projects/tmp$ touch aaa /mnt/hgfs/projects/tmp$ ln -s aaa bbb /mnt/hgfs/projects/tmp$ less bbb bbb: No such file or directory /mnt/hgfs/projects/tmp$ ls -la total 6 drwxr-xr-x 1 501 users 136 2010-12-28 18:12 . drwxr-xr-x 1 501 users 8602 2010-12-28 18:12 .. -rw-r--r-- 1 501 users 0 2010-12-28 18:12 aaa lrwxr-xr-x 1 501 users 3 2010-12-28 18:12 bbb - aaa /mnt/hgfs/projects/tmp$ readlink bbb aaa The same symlink is perfectly accessible in OS X host. Is there a workaround for this?

  Read the article

• Issues running java in Solaris 9 container

  - by Matthew Watson

  Hi, I have a solaris 9 container built from a physical server using flarcreate. Everything seems fine, except when trying to trying to run any "java -server" process it fails with the following error This is on a Sunfire T1000 machine running Solaris 10 10/09 s10s_u8wos_08a SPARC Running jdk1.5.0_15 Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_15/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space? As far as I can tell I'm not actually out of swap space. Running java in client mode works without a problem. Googles only suggestion is related to x86. Any suggestions? Thanks.

  Read the article

• Converting an EC2 AMI to vmdk image

  - by Reed G. Law

  I've come quite close to getting Amazon Linux to boot inside VirtualBox, thanks to this answer and these websites. A quick overview of the steps I've taken: Launch EC2 instance with Amazon Linux 2011.09 64-bit AMI dd the contents of the EBS volume over ssh to a local image file. Mount the image file as a loopback device and then to a local mount point. Create a new empty disk image file, partition with an offset for a bootloader, and create an ext4 filesystem. Mount the new image's partition and copy everything from the EC2 image. Install grub (using Ubuntu's grub-legacy-ec2 package, not grub2). Convert the image file to vmdk using qemu-img. Create a new VirtualBox VM with the vmdk. Now the VM boots, grub loads, and the kernel is found. But it fails when it tries to mount the root device: dracut Warning: No root device "block:/dev/xvda1" found dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. dracut Warning: Signal caught! dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35.14-107.1.39.amzn1.x86_64 #1 I have tried changing /boot/grub/menu.lst to find the root device by label and UUID, but nothing works. I'm guessing the xen kernel is not compatible with VirtualBox. The reasoning behind all this effort is to make a Vagrant box that is as close to possible as the production enviroment, so deploys can be tested locally. I know it's cheap to do test runs on EC2, but poor connectivity often ruins the experience. Plus it would be really nice to have a virtual machine with the production environment so that co-workers don't have to install everything under the sun just to get up and running with app development. If I were to try running a different kernel, what kernel could I get to be as close as possible to Amazon Linux 2011.09?

  Read the article

• Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

  - by rumtscho

  Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

  Read the article

• Building NanoBSD inside a jail

  - by ptomli

  I'm trying to setup a jail to enable building a NanoBSD image. It's actually a jail on top of a NanoBSD install. The problem I have is that I'm unable to mount the md device in order to do the 'build image' part. Is it simply not possible to mount an md device inside a jail, or is there some other knob I need to twiddle? On the host /etc/rc.conf.local jail_enable="YES" jail_mount_enable="YES" jail_list="build" jail_set_hostname_allow="NO" jail_build_hostname="build.vm" jail_build_ip="192.168.0.100" jail_build_rootdir="/mnt/zpool0/jails/build/home" jail_build_devfs_enable="YES" jail_build_devfs_ruleset="devfsrules_jail_build" /etc/devfs.rules [devfsrules_jail_build=5] # nothing Inside the jail [root@build /usr/obj/nanobsd.PROLIANT_MICROSERVER]# sysctl security.jail security.jail.param.cpuset.id: 0 security.jail.param.host.hostid: 0 security.jail.param.host.hostuuid: 64 security.jail.param.host.domainname: 256 security.jail.param.host.hostname: 256 security.jail.param.children.max: 0 security.jail.param.children.cur: 0 security.jail.param.enforce_statfs: 0 security.jail.param.securelevel: 0 security.jail.param.path: 1024 security.jail.param.name: 256 security.jail.param.parent: 0 security.jail.param.jid: 0 security.jail.enforce_statfs: 1 security.jail.mount_allowed: 1 security.jail.chflags_allowed: 1 security.jail.allow_raw_sockets: 0 security.jail.sysvipc_allowed: 0 security.jail.socket_unixiproute_only: 1 security.jail.set_hostname_allowed: 0 security.jail.jail_max_af_ips: 255 security.jail.jailed: 1 [root@build /usr/obj/nanobsd.PROLIANT_MICROSERVER]# mdconfig -l md2 md0 md1 md0 and md1 are the ramdisks of the host. bsdlabel looks sensible [root@build /usr/obj/nanobsd.PROLIANT_MICROSERVER]# bsdlabel /dev/md2s1 # /dev/md2s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 1012016 16 4.2BSD 0 0 0 c: 1012032 0 unused 0 0 # "raw" part, don't edit newfs runs ok [root@build /usr/obj/nanobsd.PROLIANT_MICROSERVER]# newfs -U /dev/md2s1a /dev/md2s1a: 494.1MB (1012016 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 123.55MB, 7907 blks, 15872 inodes. with soft updates super-block backups (for fsck -b #) at: 160, 253184, 506208, 759232 mount fails [root@build /usr/obj/nanobsd.PROLIANT_MICROSERVER]# mount /dev/md2s1a _.mnt/ mount: /dev/md2s1a : Operation not permitted UPDATE: One of my colleagues pointed out There are some file systems types that can't be securely mounted within a jail no matter what, like UFS, MSDOFS, EXTFS, XFS, REISERFS, NTFS, etc. because the user mounting it has access to raw storage and can corrupt it in a way that it will panic entire system. From http://www.mail-archive.com/[email protected]/msg160389.html So it seems that the standard nanobsd.sh won't run inside a jail while it uses the md device to build the image. One potential solution I'll try is to chroot from the host into the build jail, rather than jexec a shell.

  Read the article

• iTunes Title Bar is Equal to the Location of the Library file?

  - by Urda

  I have never been able to get a clear answer on why the latest edition of iTunes does this. I have my entire iTunes library located in C:\itunes\ and the library data files inside C:\itunes\!library_info for backup purposes. However when version 9 of iTunes came out it went from having iTunes as the title, to !library_info. Anyway to get around this without moving my data files away? Annoying "feature" if that is what it is. Again Apple support and forums were of no help to me. Anyone have insight on this? System Info: Windows Vista x86 Ultimate, latest updates. iTunes Version 9.0.3.15 Screenshot: http://farm5.static.flickr.com/4072/4414557544_d0b25eb64c_o.jpg Flickr Page: http://www.flickr.com/photos/urda/4414557544/

  Read the article

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

  - by MIDoubleKO

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• Video memory buswidth vs video memory Bandwidth

  - by Mixxiphoid

  My current video card (9600GT) is dying and I'm searching for a new video card. Between acquiring my current one and now, I got a lot more knowledge about hardware and I want to use that to pick my new card. So I decided to not just buy some popular card blindly, but to search for a card able to handle my hardware requirements. I searched the specs at the NVidia site for the GT640 and was confused by the memory section and some questions raised. My current card's memory bus width is 256bit and has 1GB of memory. I checked Google about the importance of bus width. And all the links basically said the same 'The higher the number the more potential simultaneously traffic can be transferred'. This was already clear to me, yet there are currently a lot of new cards which are considered better than my current one with a lower bus width. To go in more detail about my question I copied the memory info from the NVidia site: GT 640 GT640 GDDR5 Memory Specs: Memory Clock 1.8 Gbps 5.0 Gbps Standard Memory Config 2048 MB 1024 MB Memory Interface DDR3 GDDR5 Memory Interface Width 128-bit 64-bit Memory Bandwidth (GB/sec) 28.5 40.0 What puzzled me is that the Memory Bandwidth seems to me the most important part, yet the lower bus width has the higher 'performance'. Is this due to the fact the memory interface is GDDR5 and is therefore able to have a higher memory clock speed (5Gbps)? If I am to buy a new video card, should I check the bus width? Memory clock? Bandwith? Amount of memory? My current card ahs 1GB memory, so I was searching for a 2GB memory card, but now I'm not so sure any more whether that is really 'better'. My main question: To me it seems that memory performance is made up by the combination of bus width and frequency. Is this true? If yes, why are there so many sites telling me I need to get a card with a high bus width? If no, then what IS important when it goes about memory performance on a video card. NOTE: The memory bandwidth is (almost) never displayed on vendor sites. How can I determine which card is better without knowing the bandwith?

  Read the article

• optimizing file share performance on Win2k8?

  - by Kirk Marple

  We have a case where we're accessing a RAID array (drive E:) on a Windows Server 2008 SP2 x86 box. (Recently installed, nothing other than SQL Server 2005 on the server.) In one scenario, when directly accessing it (E:\folder\file.xxx) we get 45MBps throughput to a video file. If we access the same file on the same array, but through UNC path (\server\folder\file.xxx) we get about 23MBps throughput with the exact same test. Obviously the second test is going through more layers of the stack, but that's a major performance hit. What tuning should we be looking at for making the UNC path be closer in performance to the direct access case? Thanks, Kirk (corrected: it is CIFS not SMB, but generalized title to 'file share'.) (additional info: this happens during the read from a single file, not an issue across multiple connections. the file is on the local machine, but exposed via file share. so client and file server are both same Windows 2008 server.)

  Read the article

• My facebook blocking ACL has stopped working

  - by Josh

  This probably very simple. This was setup before I arrived, and has been working to block facebook. I recently eliminated some static port forwarding on this 2691 (as in, I don't think anything else has changed), and now facebook is once again accessible. Why is this list not doing what it seems like it should be doing (and was doing)? Would an extended outbound ACL be more appropriate (I think that would have been my thought if I had been tasked with creating this in the first place)? Something different? I've included below what I believe are the relevant parts of the config. interface FastEthernet0/0 ip address my.pub.ip.add my.ip.add.msk ip access-group 1 in ip nat outside ip virtual-reassembly duplex auto speed auto access-list 1 deny 69.171.224.0 0.0.31.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 deny 66.220.144.0 0.0.15.255 access-list 1 deny 69.63.176.0 0.0.15.255 access-list 1 permit any ip nat inside source list 105 interface FastEthernet0/0 overload access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 105 permit ip 192.168.1.0 0.0.0.255 any EDIT ACL is once again blocking Facebook. Here is the new definition for those interested... access-list 1 deny 66.220.144.0 0.0.7.255 access-list 1 deny 66.220.152.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.0.255 access-list 1 deny 69.63.184.0 0.0.7.255 access-list 1 deny 69.171.224.0 0.0.15.255 access-list 1 deny 69.171.239.0 0.0.0.255 access-list 1 deny 69.171.240.0 0.0.15.255 access-list 1 deny 69.171.255.0 0.0.0.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 173.252.64.0 0.0.31.255 access-list 1 deny 173.252.70.0 0.0.0.255 access-list 1 deny 173.252.96.0 0.0.31.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 permit any

  Read the article

• Problem in installing & configuring bugzilla

  - by VIVEK

  Can somebody help me in installing bugzilla (list out exact steps if possible) on Windows Server 2008 with IIS 7.0 , Mysql 5.1 & existing email server(already configured)? I followed installation steps from many posts & also your site , everything goes right but when I start to creating accounts by sending email in bugzilla web panel, I get error:- “There was an error sending mail from 'bugzilla-daemon@' to '[email protected]':Can't call method "address" on an undefined value at C:/Program Files (x86)/Bugzilla/perl/perl/site/lib/Email/Send/SMTP.pm line 25.” I also tried installing through Windows installer, but same issues. Please any help would be appreciated. Expecting quick response.

  Read the article

• Universal Windows XP With Ghost and Sysprep

  - by RobertPitt

  Hey I have an idea but im not sure whether it is possible and looking for advice on how to accomplish this. If i was to try and deploy Windows XP Sysprepped image from a Lenovo Thinkcentre 6073-CTO and tried to drop it onto a Dell Optiplex for instance I would get a BSOD due to the hardware change. What im looking to do is create a few images like so: Windows XP x86 SP3 (Sysprepped) Windows XP x64 SP3 (Sysprepped) ... So that we can use throughout the organization without having to create individual images per computer type. Is there anyway's to accomplish this such as some modification of files pre-ghost, removal a certain drivers pre-sysprep Any advice is appreciated.

  Read the article

• Troubleshooting a high SQL Server Compilation/Batch-Ratio

  - by Sleepless

  I have a SQL Server (quad core x86, 4GB RAM) that constantly has almost the same values for "SQLServer:SQL Statistics: SQL compilations/sec" and "SQLServer:SQL Statistics: SQL batches/sec". This could be interpreted as a server running 100% ad hoc queries, each one of which has to be recompiled, but this is not the case here. The sys.dm_exec_query_stats DMV lists hundreds of query plans with an execution_count much larger than 1. Does anybody have any idea how to interpret / troubleshoot this phenomenon? BTW, the server's general performance counters (CPU,I/O,RAM) all show very modest utilization.

  Read the article

• Cygwin and zsh: removing "path prefix line"

  - by Viktor

  I've installed Cygwin under Windows 7 and I've added the line exec zsh -l to C:\cygwin\home\Viktor\.bash_profile. Problem is I still get that ugly new line for every command I write: (Viktor@INET)[2] ~ $ cd D: (Viktor@INET)[3] /cygdrive/d $ ls $RECYCLE.BIN Program Files (x86) System Volume Information Viktor xampp (Viktor@INET)[4] /cygdrive/d $ _ As horizontal space is no concern with 1920 pixels I would like to have the "Linux appearance", something like this viktor@inet> _ or whatever is default. One command shouldn't take three lines. And how do I change the colors? Edit. I also have Console2 installed, which I have set to use Cygwin, if that's any help.

  Read the article

• Ubuntu box static routing problem

  - by Rafael

  Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

  Read the article

• Run Flyff without elevating user to Admin or requiring Admin Password

  - by AnonJr

  Bottom Line: I need to set up one game on my little sister's laptop to run without requiring an admin password/account. Its the only game that seems to insist on it... so far. Detailed Version: I set up my 14-year-old sister as a regular user on her Windows 7 Home Premium laptop, and almost everything has been fine - until she found a new game (Flyff) that doesn't seem to want to run without an Admin Password (or being logged in as an Admin). For what should be obvious reasons, I'm not going to make her an Admin. or give her the Admin password (which she swears she'll only use to run this game... anyone else buying that? Bueller?) Also, the parents aren't admins on her laptop (they are on their own, but that's another discussion for another day) and I'm not going to set them up as one as I know from past experience that the 3rd time my sister asks them to put in their password, they'll just tell her what it is - at which point I might as well as have just set her up as an admin from the outset. This is a Win7 Home Premium (64-bit, but I doubt that makes a difference) laptop, so using GPEdit is out. I also tried an answer provided in a related (but less specific) question. The app has read/write permissions for its folder in Program Files (x86), yet that doesn't seem to make a difference. I have not yet dug through the registry as mentioned in another answer to the aforementioned question. Just to be thorough, I have checked the "Run as Admin" option on the shortcut's properties to no avail. Am I missing something? Addendum 2010-11-11: Re-Checked permissions as per Joel's answer, and it didn't make a difference. Followed Jane T's suggestion (and Aeo's second) and created a "Games" folder outside Program Files, installing the game there - and making sure regular users had all the permissions they would need. No joy. After the latter of the above two changes, it occurred to me that it may be a UAC issue, so for kicks I turned off UAC - still the damn message. Last item noted: could it be a result of the publisher not being specified/verified? I've been taking a closer look at the error message and it occurred to me that the missing/unverified publisher info could have been the problem all along... Correct me if I'm wrong, but if that's the case, that means there's nothing I can do short of giving her some sort of Admin privileges (i.e. elevating her account, or giving her the password to a separate Admin account) or giving Mom an Admin account.

  Read the article

< Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >