Search Results

Search found 8830 results on 354 pages for 'enterprise deployment'.

Page 319/354 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• Unable to create website error (NEW)

  - by salvationishere

  I copied my ClickOnce deployment to my C:/Inetpub/ folder on my webserver and I deleted my Virtual directory. I deleted the WpfApplication1 folder beneath wwwroot in Win Explorer. Then I turned on Web Sharing for this folder. Then I viewed my IIS Manager and this new Share name appeared under wwwroot. So now under Inetpub folder on my web server I have the following directory path: C:\Inetpub\WpfApplication1\ with contents: Application Files publish.htm setup.exe WpfApplication1.application Next, I remapped both the publishing and installation URL's for the project to http://myserver/WpfApplication1/ And I clicked Publish Now. But after I performed a Publish Now operation, I got the following error on my development server (D610-M): Error 1 Failed to connect to 'http://myserver/WpfApplication1/' with the following error: Unable to create the Web site 'http://myserver/WpfApplication1/'. The Web server does not appear to have any authentication methods enabled. It asked for user authentication, but did not send a WWW-Authenticate header. 1 1 WpfApplication1 On my webserver, when I click Browse from the IIS Manager on the WpfApplication1 directory, it shows me the Install page. But after I click the Browse button, it returns an error which says: The remote name could not be resolved: 'd610-m' (D610-M is the name of my development server). How do I fix this?

  Read the article

• how to push different local git branches to heroku/master

  - by lsiden

  Heroku has a policy of ignoring all branches but 'master'. While I'm sure Heroku's designers have excellent reasons for for this policy (I'm guessing for storage and performance optimization), the consequence to me as a developer is that whatever local topic branch I may be working on, I would like an easy way to switch Heroku's master to that local topic branch and do a "git push heroku -f" to over-write master on Heroku. What I got from reading the "Pushing Refspecs" section of http://progit.org/book/ch9-5.html is git push -f heroku local-topic-branch:refs/heads/master What I'd really like is a way to set this up in the config file so that "git push heroku" always does the above, replacing local-topic-branch with the name of whatever my current branch happens to be. If anyone knows how to accomplish that, please let me know! The caveat for this, of course, is that this is only sensible if I am the only one who can push to that Heroku app/repository. A test or QA team might manage such a repository to try out different candidate branches, but they would have to coordinate so that they all agree on what branch they are pushing to it on any given day. Needless to say, it would also be a very good idea to have a separate remote repository (like Github) without this restriction for backing everything up to. I'd call that one "origin" and use "heroku" for Heroku so that "git push" always backs up everything to origin, and "git push heroku" pushes whatever branch I'm currently on to Heroku's master branch, overwriting it if necessary. Can anybody tell me if this would work? [remote "heroku"] url = [email protected]:my-app.git push = +refs/heads/*:refs/heads/master I'd like to hear from someone more experienced before I begin to experiment, although I suppose I could create a dummy app on Heroku and experiment with that. As for fetching, I don't really care if the Heroku repository is write-only. I still have a separate repository, like Github, for backup and cloning of all my work. Footnote: This question is similar to, but not quite the same as http://stackoverflow.com/questions/1489393/good-git-deployment-using-branches-strategy-with-heroku

  Read the article

• Making one table equal to another without a delete *

  - by Joshua Atkins

  Hey, I know this is bit of a strange one but if anyone had any help that would be greatly appreciated. The scenario is that we have a production database at a remote site and a developer database in our local office. Developers make changes directly to the developer db and as part of the deployment process a C# application runs and produces a series of .sql scripts that we can execute on the remote side (essentially delete *, insert) but we are looking for something a bit more elaborate as the downtime from the delete * is unacceptable. This is all reference data that controls menu items, functionality etc of a major website. I have a sproc that essentially returns a diff of two tables. My thinking is that I can insert all the expected data in to a tmp table, execute the diff, and drop anything from the destination table that is not in the source and then upsert everything else. The question is that is there an easy way to do this without using a cursor? To illustrate the sproc returns a recordset structured like this: TableName Col1 Col2 Col3 Dest Src Anything in the recordset with TableName = Dest should be deleted (as it does not exist in src) and anything in Src should be upserted in to dest. I cannot think of a way to do this purely set based but my DB-fu is weak. Any help would be appreciated. Apologies if the explanation is sketchy; let me know if you need anymore details.

  Read the article

• Explaining verity index and document search limits

  - by Ahmad

  As present, we currently have a CF8 standard edition server which have some limitations around verity indexing. According to Adobe Verity Server has the following document search limits (limits are for all collections registered to Verity Server): - 10,000 documents for ColdFusion Developer Edition - 125,000 documents for ColdFusion Standard Edition - 250,000 documents for ColdFusion Enterprise Edition We have now reached a stage where the server wide number of documents indexed exceed 125k. However, the largest verity collection consists of about 25k documents(and this is expected to grow). Only one collection is ever searched at a time. In my understanding, this means that I can still search an entire collection with no restrictions. Is this correct? Or does it mean that only documents that were indexed across all collection prior to reaching the limit are actually searchable? We are considering moving to CF9 standard as a solution to this and to use the Solr solution which has no restrictions. The coldfusionjedi highlights some differences between Verity and Solr. However, before we upgrade I am trying to gain a clearer understanding of this before we commit to an upgrade. Can someone provide me a clear explanation as to what this means and how it actually affects verity searching and indexing?

  Read the article

• yet another question about migrating to Java

  - by aloneguid

  Hi, There are plenty similar questions, but maybe responses to this one will save a developer's life :) I want to migrate to Java. The reasons are very clear: all the .NET vacancies are client and windows oriented (Silverlight developer, ASP.NET developer, WPF developer etc.) and none of them are any interest to me. I worked with .NET since it's beginning as our company decided to invest in .NET having C++ stack and all the natual problems, so I was just blindly following and actually enjoyed it as the products were mostly server oriented with mixed C++/C# code. Today I have beforementioned problem - can't find an inspiring job. I'd rather kill myself than start working on a Silverlight or WPF project. Searching Java vacancies shows promising results, however they all require a huge java-related technology stack and experience. The question is is there any chance to find a job quickly and without dramatic salary drop (I know that Java guys are usually better paid, so there must be a kind of a credit) and if not, how must time and effort does it take to migrate (my .NET knowledge mostly includes server-oriented technologies like NHibernate, WCF, threading, sockets, ASP.NET web services, Enterprise Library, NInject etc etc etc, and (still) some C++ leftovers). Thanks!

  Read the article

• Daemon program that uses select() inside infinite loop uses significantly more CPU when ported from

  - by Jake

  I have a daemon app written in C and is currently running with no known issues on a Solaris 10 machine. I am in the process of porting it over to Linux. I have had to make minimal changes. During testing it passes all test cases. There are no issues with its functionality. However, when I view its CPU usage when 'idle' on my Solaris machine it is using around .03% CPU. On the Virtual Machine running Red Hat Enterprise Linux 4.8 that same process uses all available CPU (usually somewhere in the 90%+ range). My first thought was that something must be wrong with the event loop. The event loop is an infinite loop ( while(1) ) with a call to select(). The timeval is setup so that timeval.tv_sec = 0 and timeval.tv_usec = 1000. This seems reasonable enough for what the process is doing. As a test I bumped the timeval.tv_sec to 1. Even after doing that I saw the same issue. Is there something I am missing about how select works on Linux vs. Unix? Or does it work differently with and OS running on a Virtual Machine? Or maybe there is something else I am missing entirely? One more thing I am sure sure which version of vmware server is being used. It was just updated about a month ago though. Thanks.

  Read the article

• 3 Servers, is this is a cluster?

  - by Andy Barlow

  Hello, At the moment I have one Ubuntu server, 9.10, running with a simple Samba share, a mail server, DNS server and DHCP server. Mostly its just there for file sharing and email server. I also have 2 other servers that are exactly the same hardware and spec as the first, which have an rsync set up to retrieve the shared folders and backs them up. However, if the first server goes down, all of our shares disappear along with our mail and the system must be rebuilt. Also I tend to find if people are downloading a large amount from the file server, no-one can access there emails - especially in the morning when everyone is signing in at once. Would it be more beneficial for me to have all 3 servers, all running the same services, doing the same thing with some sort of cluster with load balancing? I'm not really sure where to begin looking, or how to go about such a setup where 3 servers are all identical, but perhaps one acts as the main load balancer?? If someone can point me in the right direction, or if this simply sounds like one of those Enterprise Cloud's that is now a default setup in Ubuntu Server 9.10+, then I'll go down that route. Cheers in advance. Andy

  Read the article

• Using hg repository as web site

  - by Tex

  This is somewhat related to my security question here. Is it a bad idea to use an hg / mercurial repository for a live website? If so, why? Furthermore, we have dev, test and production installations of our website, like dev.example.com, test.example.com and www.example.com. If it's a bad idea to use a repository for a live/production website, would it be OK to use an hg repository for the dev and test sites? I'm also concerned about ease of deployment. We have technical and less technical co-workers who will be working with the site. The technical guys (software engineers) won't have any problem working with the command line or TortoiseHG. I'm more concerned about the less technical guys (web designers). They won't be comfortable working on the command line, and may even find TortoiseHG daunting. These guys mostly upload .css files and images to the server. I'd like for these files (at least the .css files) to be under version control, but I want this to be as transparent as possible for the non technical guys. What's the best way to achieve this? Edit: Our 'site' is actually a multi-site CMS setup with a main repository and several subrepositories. Mock-up of the repository structure: /root [main repository containing core files and subrepositories] /modules [modules subrepository] /sites/global [subrepository for global .css and .php files] /sites/site1 [site1 subrepository] ... /sites/siteN [siteN subrepository] Software engineers would work in the root, modules and sites/global repositories. Less technical guys (web designers) would work only in the site1 ... siteN subrepositories.

  Read the article

• MS Query Analyzer / Management Studio replacement?

  - by kprobst

  I've been using SQL Server since version 6.5 and I've always been a bit amazed at the fact that the tools seem to be targeted to DBAs rather than developers. I liked the simplicity and speed of the Query Analyzer for example, but hated the built-in editor, which was really no better than a syntax coloring-capable Notepad. Now that we have Management Studio the management part seems a bit better but from a developer standpoint the tools is even worse. Visual Studio's excellent text editor... without a way to customize keyboard bindings!? Don't get me started on how unusable is the tree-based management hierarchy. Why can't I re-root the tree on a list of stored procs for example the way the Enterprise Manager used to allow? Now I have a treeview that needs to be scrolled horizontally, which makes it eminently useless. The SQL server support in Visual Studio is fantastic for working with stored procedures and functions, but it's terrible as a general ad hoc data query tool. I've tried various tools over the years but invariably they seem to focus on the management side and shortchange the developer in me. I just want something with basic admin capabilities, good keyboard support and requisite DDL functionality (ideally something like the Query Analyzer). At this point I'm seriously thinking of using vim+sqlcmd and a console... I'm that desperate :) Those of you who work day in and day out with SQL Server and Visual Studio... do you find the tools to be adequate? Have you ever wished they were better and if you have found something better, could you share please? Thanks!

  Read the article

• Integrating ASP.NET MVC 2 with classic ASP

  - by David Lively

  I'm in the process of moving a large classic ASP application to ASP.NET MVC 2. Questions: My question is about project organization. I would prefer to not mix the MVC code with the ASP code in the same VS project. I'd like to have an MVC WAP with areas that match the parts of the website that I'm migrating. For instance, the old site has a folder /products/default.asp..... /products/productName/default.asp etc. In the MVC WAP, I'd like to have an area called "products", which I could then, either through a rewrite, routing, or preferably through some IIS configuration, point the "products" folder on the ASP site to. In this way, I could gradually move root folders from the ASP site to the MVC application. However, if I create the MVC WAP in a virtual folder, then my routes wind up looking like http://localhost/virtualFolder/products instead of http://localhost/products Any suggestions on how to conquer this? I know that, during deployment, I could deploy the MVC WAP into the root of the ASP site, but this doesn't help with debugging.

  Read the article

• sql server 2005 stored procedure unexpected behaviour

  - by user283405

  i have written a simple stored procedure (run as job) that checks user subscribe keyword alerts. when article posted the stored procedure sends email to those users if the subscribed keyword matched with article title. One section of my stored procedure is: OPEN @getInputBuffer FETCH NEXT FROM @getInputBuffer INTO @String WHILE @@FETCH_STATUS = 0 BEGIN --PRINT @String INSERT INTO #Temp(ArticleID,UserID) SELECT A.ID,@UserID FROM CONTAINSTABLE(Question,(Text),@String) QQ JOIN Article A WITH (NOLOCK) ON A.ID = QQ.[Key] WHERE A.ID > @ArticleID FETCH NEXT FROM @getInputBuffer INTO @String END CLOSE @getInputBuffer DEALLOCATE @getInputBuffer This job run every 5 minute and it checks last 50 articles. It was working fine for last 3 months but a week before it behaved unexpectedly. The problem is that it sends irrelevant results. The @String contains user alert keyword and it matches to the latest articles using Full text search. The normal execution time is 3 minutes but its execution time is 3 days (in problem). Now the current status is its working fine but we are unable to find any reason why it sent irrelevant results. Note: I am already removing noise words from user alert keyword. I am using SQL Server 2005 Enterprise Edition.

  Read the article

• problem drawing gRaphaeljs pie chart

  - by Aswad

  Hi, I was trying to draw the raphaeljs piechart. I used the same example as shown on "http://g.raphaeljs.com/piechart2.html". It renders me the text but the pie charts goes missing.Can someone please help? please find the code below. g·Raphaël Dynamic Pie Chart Demo window.onload = function () { var r = Raphael("holder"); r.g.txtattr.font = "12px 'Fontin Sans', Fontin-Sans, sans-serif"; r.g.text(320, 100, "Interactive Pie Chart Demo").attr({"font-size": 20}); var pie = r.g.piechart(320, 240, 100, [55, 20, 13, 32, 5, 1, 2, 10], {legend: ["%%.%% – Enterprise Users", "IE Users"], legendpos: "west", href: ["http://raphaeljs.com", "http://g.raphaeljs.com"]}); pie.hover(function () { this.sector.stop(); this.sector.scale(1.1, 1.1, this.cx, this.cy); if (this.label) { this.label[0].stop(); this.label[0].scale(1.5); this.label[1].attr({"font-weight": 800}); } }, function () { this.sector.animate({scale: [1, 1, this.cx, this.cy]}, 500, "bounce"); if (this.label) { this.label[0].animate({scale: 1}, 500, "bounce"); this.label[1].attr({"font-weight": 400}); } }); }; </script> </head> <body class="raphael" id="g.raphael.dmitry.baranovskiy.com"> <div id="holder"></div> <p> Pie chart with legend, hyperlinks on two first sectors and hover effect. </p> <p> Demo of <a href="http://g.raphaeljs.com/">g·Raphaël</a> JavaScript library. </p> </body>

  Read the article

• ASP.Net Forms authentication provider issue

  - by George2

  Hello everyone, I am using VSTS 2008 + .Net 3.5 + ASP.Net to develop a simple web application. And I am using Forms authentication for my web site (I use command aspnet_regsql.exe to create a new database in SQL Server 2008 Enterprise to host database for Forms Authentication. I am not using SQL Server Express.). I am learning Forms authentication from here, http://msdn.microsoft.com/en-us/library/ff648345.aspx#paght000022_usingthesqlmembershipprovider my question is for the name of membership defaultProvider, the value must be "SqlProvider"? Or I can use any arbitrary name, for example like this (I replace the value "SqlProvider" to "MyTestSqlProvider")? <connectionStrings> <add name="MySqlConnection" connectionString="Data Source=MySqlServer;Initial Catalog=aspnetdb;Integrated Security=SSPI;" /> </connectionStrings> <system.web> ... <membership defaultProvider="MyTestSqlProvider" userIsOnlineTimeWindow="15"> <providers> <clear /> <add name="MyTestSqlProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="MySqlConnection" applicationName="MyApplication" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="true" passwordFormat="Hashed" /> </providers> </membership> thanks in advance, George

  Read the article

• Rails 3 with Ruby 1.9.1 on Heroku

  - by stephen murdoch

  I've decided that I am going to man-up and start using Rails 3 from now on but the following note found here puts me off a bit: Note that Ruby 1.8.7 has marshaling bugs that crash both Rails 2.3.x and Rails 3.0.0. Ruby 1.9.1 outright segfaults on Rails 3.0.0, so if you want to use Rails 3 with 1.9.x, jump on 1.9.2 trunk for smooth sailing. I use Heroku for my deployment and as far as I am aware they do not plan to add 1.9.2 to the stack until it's stable (which might be in August) so I was thinking of doing it with 1.9.1. and seeing what happens. I know that there is a 3rd beta release now but the comments on the blog imply that it's still a little bit buggy. Is DHH inferring that you shouldn't touch Rails 3 at all if you are on 1.9.1? What are other Heroku-ists doing regarding Rails 3? Anyone using it for any production apps? I guess I'll only know once I've tried but any advice would be nice.

  Read the article

• Problem: Vectorizing Code with Intel Visual FORTRAN for X64

  - by user313209

  I'm compiling my fortran90 code using Intel Visual FORTRAN on Windows Server 2003 Enterprise X64 Edition. When I compile the code for 32 bit structure and using automatic and manual vectorizing options. The code will be compiled, vectorized. And when I run it on 8 core system the compiled code uses 70% of CPU that shows me that vectorizing is working. But when I compile the code with 64 Bit compiler, it says that the code is vectorized but when I run it it only shows CPU usage of about 12% that is full usage for one core out of 8, so it means that while the compiler says that code is vectorized, vectorization is not working. And it's strange for me because it's on a X64 Edition Windows and I was expecting to see the reverse result. I thought that it should be better to run a code that is compiled for 64 Bit architecture on a 64 bit windows. Anyone have any idea why the compiled code is not able to use the full power of multiple cores for 64 Bit Compiled version? Thanks in advance for your responses.

  Read the article

• Generating a static website from a set of content data (possibly with webgen, webby or a similar too

  - by Darel

  My company (an engineering firm) is looking to redesign their website with some dynamic content. We have a nice portfolio of projects that we'd like to present on our site by category. To elaborate, I'd like to have a "Projects Category" menu, where you can choose a sub-project category (such as churches, schools, etc) which links to a page with images of all projects which have been tagged with that category attribute. Clicking on an image would then take you to a detailed page for that project. I have done a good bit of asp and jsp page development, but I've always worked on the front end in an enterprise environment - I've never built a production site from the back end. The advice I've gotten so far is that a full-blown CMS solution would be somewhat overkill, as we won't have a large hit count, and we'll be displaying a few hundred projects at most. One big-picture choice I appear to have - whether to dynamically generate the pages (with asp or jsp) or to use a tool to generate a set of static html pages. The tool would build the menus, project summary pages, and individual project pages based on a set of data I could provide (in the form of a database or text file.) I'm leaning towards trying to use a tool like webgen or webby to statically generate the site due to our current web hosting situation. Any thoughts on which approach is more appropriate? Is webgen or webby capable of doing what I am trying to do? Or can anyone recommend other web authoring tools better equipped to accomplish this? Thanks for any feedback!

  Read the article

• Deploying .NET COM dll, getting error (0x80070002)

  - by Brett

  I have a .NET COM assembly I am attempting to deploy to a web server (IIS 6 Win 2003). We have successfully deployed this assembly to our test environment, but the production environment is not working. The assembly is being called from a classic ASP page. Every time that page tries to initialize the assembly with “Set LTMRender = CreateObject("LTMRender.Render")”, I get an error “Error Type:, (0x80070002)”. This error seems to indicate a permission denied, or file not found type problem. I created a test app to see if the assembly works outside of the web page. The .exe initializes the assembly, and then makes a call designed to fail which in turn causes the assembly to produce a log file. It works if I run the .exe in the same folder as the assembly, but fails if I run it elsewhere. For some reason, the assembly is not accessible from outside it’s folder. I can’t figure out why this won’t work. Things I have confirmed: The deployment folder has adequate permissions. We have confirmed that the folder the assembly in installed in has the correct permissions for all the necessary user accounts. The Assembly is signed with a strong name, and was registered with regasm.exe C:_WebSites\LTMRender\LTMRender.dll /codebase /tlb:C:_WebSites\LTMRender\LTMRender.tlb. Regasm reported success. The Assembly has the attribute and relevant GUID’s set correctly. Any tips? EDIT We ran filemon against my testapp.exe and it seems to have indicated what the problem is. When testapp.exe runs in D:_websites\DocWebV2\ or D:_websites\DocWebV2\ LTMRender\ folder, it succeeds and filemon is showing D:_websites\DocWebV2\LTMRender\pinPDF.dll SUCCESS If I run my testapp.exe in the D:_websites\DocWebV2\Client – where my asp pages run, it shows D:_websites\DocWebV2\pinPDF.dll NAME NOT FOUND and then D:_websites\DocWebV2\pinPDF\pinPDF.dll FILE NOT FOUND I’m not sure why it is not looking in the correct folder if it’s under this particular folder only.

  Read the article

• Which java web technology to learn to develop Rich Internet Applications ?

  - by Cshah

  Hi, I have developed web applications using JSF (myfaces components). But in these days of responsive UI, JSF doesnt fare well. I m hearing a lot about AJAX, GWT, etc. So i wanted your opinion on which web technology/framework should i learn inorder to develop web applications for enterprise products. Some of the web technologies that i m hearing are: ICE Faces (With AJAX Bridge support) GWT extJS and extGWT JavaFX Apache Wicket Jquery AJAX Open laszlo Which of the above or the combination of the above would help me ? Some of the parameters on which you can rate these web technologies are: Ease of learning Maintainability of web application code Community support IDE support - Eclipse or NetBeans Off the shelf component availability (like textbox,table grids, option menus) License - Does it cost for commercial use ? User Experience - responsive UI. Shouldnt be sluggish A similar question on SO does answer my question partially. Would want more info though. EDIT: Answers collated: Based on the answers : AJAX would be the best thing to start for learning fundamentals, then learn JQUERY. Any component based frame work that can complement ajax,jquery ? Edit 2: If i had to design a web application like StackOverFlow (in java platform) which would be the best choice to learn and adopt? Wicket + Jquery, WiQuery GWT Some XYZ Faces technology(RichFaces/ICEFaces) + AJAX. Comments appreciated from some one who has worked with them and can rate them in the above mentioned parameters.

  Read the article

• csc.exe not found error

  - by pokrate

  I have installed a fresh copy of windows xp 2002 with SP2, and then VS.net 2008 enterprise edition. I am trying to build a simplest possible web application, and its not compiling giving error csc.exe not found. I googled a lot, and spot the problem in the following section in web.config : <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" warningLevel="4" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> But if i remove the csharp compiler section , and then compile, it compiles fine with vb compiler section. And if I change the value from v3.5 to v2.0 in the of csharp section, then also it compiles fine. But then all my Linq Queries are not recognized by the compiler. But System.Linq and all classes present in it are accessible in the code. Please help in this weird behavior.

  Read the article

• Test-First development tool for SQL Server 2005?

  - by Jeff Jones

  For several years I have been using a testing tool called qmTest that allows me to do test-driven database development for some Firebird databases. I write a test for a new feature (table, trigger, stored procedure, etc.) until it fails, then modify the database until the test passes. If necessary, I do more work on the test until it fails again, then modify the database until the test passes. Once the test for the feature is complete and passes 100% of the time, I save it in a suite of other tests for the database. Before moving on to another test or a deployment, I run all the tests as a suite to make sure nothing is broken. Tests can have dependencies on other tests, and the results are recorded and displayed in a browser. Nothing new here, I am sure. Our shop is aiming toward standardizing on MSSQLServer and I want to use the same procedure for developing our databases. Does anyone know of tools that allow or encourage this kind of development? I believe the Team System does, but we do not own that at this point, and probably will not for some time. I am not opposed to scripting, but would welcome a more graphical environment. Any suggestions?

  Read the article

• best way to switch between secure and unsecure connection without bugging the user

  - by Brian Lang

  The problem I am trying to tackle is simple. I have two pages - the first is a registration page, I take in a few fields from the user, once they submit it takes them to another page that processes the data, stores it to a database, and if successful, gives a confirmation message. Here is my issue - the data from the user is sensitive - as in, I'm using an https connection to ensure no eavesdropping. After that is sent to the database, I'd like on the confirmation page to do some nifty things like Google Maps navigation (this is for a time reservation application). The problem is by using the Google Maps api, I'd be linking to items through a unsecure source, which in turn prompts the user with a nasty warning message. I've browsed around, Google has an alternative to enterprise clients, but it costs $10,000 a year. What I am hoping is to find a workaround - use a secure connection to take in the data, and after it is processed, bring them to a page that isn't secure and allows me to utilize the Google Maps API. If any of you have a Netflix account you can see exactly what I would like to do when you sign-in, it is a secure page, which then takes you to your account / queue, on an unsecure page. Any suggestions? Thanks!

  Read the article

• How to access application.xml file of an EAR deployed to IBM WebSphere 6.1

  - by Matt1776

  I am deploying an EAR file to the IBM WebSpehre server 6.1 - I want to be able to access the EAR application name which is stored in the deployment file under 'display-name'. Looking through stack overflow posts on related subjects, I've been able to gather that this is possible via the Java MBean API - or IBM's WAS API - Problem is I cannot find a place where these API lists are summarized, i.e. cannot figure out which one to begin looking at. I could hardcode the WAS install location and find the file by looking in the 'installedApps' directory, but this is not dynamic. Does anyone have any experience working with these APIs? Any other way to dynamically find the deployed EAR's display name? EDIT - I should add that the reason I would like this information is to dynamically load our properties files - that are named by the following convention "EARAppName.properties" - so you see there IS a reasonable 'rationale' behind desiring this information in my application EDIT 2 - I should also note that this app will always be deployed on a WAS - but in the case that it isnt, a generic non-proprietary solution would be preferred, but not necessary at this moment. EDIT 3 - What I want to accomplish: Is there a way to dynamically find the deployed EAR's display name from within the application code?

  Read the article

• How can I stop SQL Server Management Studio replacing 'SELECT *' with the column list ?

  - by Ben McIntyre

  SQL Server Mgmt Studio is driving me crazy. If I create a view and SELECT '*' from a table, it's all OK and I can save the view. Looking at the SQL for the view (eg.by scripting a CREATE) reveals that the 'SELECT *' really is saved to the view's SQL. But as soon as I reopen the view using the GUI (right click modify), SELECT * is replaced with a column list of all the columns in the table. How can I stop Management Studio from doing this ? I want my 'SELECT *' to remain just that. Perhaps it's just the difficulty of googling 'SELECT *' that prevented me from finding anything remotely relevant to this (i did put it in double quotes). Please, I am highly experienced in Transact-SQL, so please DON'T give me a lecture on why I shouldn't be using SELECT *. I know all the pros and cons and I do use it at times. It's a language feature, and like all language features can be used for good or evil (I emphatically do NOT agree that it is never appropriate to use it). Edit: I'm giving Marc the answer, since it seems it is not possible to turn this behaviour off. Problem is considered closed. I note that Enterprise Manager did no similar thing. The workaround is to either edit SQL as text, or go to a product other than Managment Studio. Or constantly edit out the column list and replace the * every time you edit a view. Sigh.

  Read the article

• Alternatives to using web.config to store settings (for complex solutions)

  - by Brian MacKay

  In our web applications, we seperate our Data Access Layers out into their own projects. This creates some problems related to settings. Because the DAL will eventually need to be consumed from perhaps more than one application, web.config does not seem like a good place to keep the connection strings and some of the other DAL-related settings. To solve this, on some of our recent projects we introduced a third project just for settings. We put the setting in a system of .Setting files... With a simple wrapper, the ability to have different settings for various enviroments (Dev, QA, Staging, Production, etc) was easy to achieve. The only problem there is that the settings project (including the .Settings class) compiles into an assembly, so you can't change it without doing a build/deployment, and some of our customers want to be able to configure their projects without Visual Studio. So, is there a best practice for this? I have that sense that I'm reinventing the wheel. Some solutions such as storing settings in a fixed directory on the server in, say, our own XML format occurred to us. But again, I would rather avoid having to re-create encryption for sensitive values and so on. And I would rather keep the solution self-contained if possible. EDIT: The original question did not contain the really penetrating reason that we can't (I think) use web.config ... That puts a few (very good) answers out of context, my bad.

  Read the article

• Azure : The process cannot access the file "" because it is being used by another process.

  - by Shantanu

  Hi all, I am trying to get a matlab-compiled exe running on Azure cloud, and for that purpose need to get a v78.zip onto the local storage of the cloud and unzip it, before I can try to run an exe on the cloud. The program works fine when executed locally, but on deployment gives and error at line marked below in the code. The error is : The process cannot access the file 'C:\Resources\directory\cc0a20f5c1314f299ade4973ff1f4cad.WebRole.LocalStorage1\v78.zip' because it is being used by another process. Exception Details: System.IO.IOException: The process cannot access the file 'C:\Resources\directory\cc0a20f5c1314f299ade4973ff1f4cad.WebRole.LocalStorage1\v78.zip' because it is being used by another process. The code is given below: string localPath = RoleEnvironment.GetLocalResource("LocalStorage1").RootPath; Response.Write(localPath + " \n"); Directory.SetCurrentDirectory(localPath); CloudBlob mblob = GetProgramContainer().GetBlobReference("v78.zip"); CloudBlockBlob mbblob = mblob.ToBlockBlob; CloudBlob zipblob = GetProgramContainer().GetBlobReference("7z.exe"); string zipPath = Path.Combine(localPath, "7z.exe"); string matlabPath = Path.Combine(localPath, "v78.zip"); IEnumerable<ListBlockItem> blocklist = mbblob.DownloadBlockList(); BlobStream stream = mbblob.OpenRead(); FileStream fs = File.Create(matlabPath); (Exception occurs here) It'll be great help if someone could tell me where I'm going wrong. Thanks! Shan

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >