Search Results

Search found 11051 results on 443 pages for 'removable drive'.

Page 319/443 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• Ubuntu with Netatalk and Samba TimeMachine can't connect

  - by Philip

  I installed netatalk on my Ubuntu Server a few weeks ago and configured it so that I could use Timemachine from my mac to backup on a server instead of a external hard drive. It worked really good until yesterday when I installed Samba to be able to share certain folders on my server to my mac. Now I receive an error msg: There are no shares available or you are not allowed to access them on the server. Please contact your system administrator to resolve the problem. From what I understand is that the problem is on the server and not on my mac. I have tried to restart the computer and without adding any of the folders Samba is sharing adding the timemachine "afp://...@...". Is there a problem running them both at the same time, do I need to configure samba so that it doesn't reject afp? I'm pretty new at this...

  Read the article

• My 5.1 audio system not working properly when I connect to Internet

  - by Gemboz

  I just bought a Genuis 5005 5.1 audio system, and I have an issue with it: It won't work properly when I get on the Internet (the central speaker isn't working). I also bought an Asus Xonar DG 5.1 sound card which works perfectly. I installed it and also installed the driver for it. When I play music/videos from my hard drive, all the speakers work fine, but when I connected to Internet to play videos/music, the center speaker won't work. How can I fix this issue?

  Read the article

• Virtualbox 4 hangs when trying to install ubuntu guest on ubuntu host system

  - by misterjinx

  I'm trying to install ubuntu server using virtualbox 4.0.4 in a ubuntu 10.10 host OS. I have the iso image on my hard drive which I used to perform the install. I edited the settings and added this image at the storage section, selected it as a primary master, so I could boot from it and start the install process. But now, each time I start the installation, at the very beginning or if I'm lucky, after I click on the install link at the welcome screen, the process hangs and all the computer is blocked. This happened 3 times already. I even tried to perform the installation using an old CD I had with the 9.10 server version, thinking that the iso image might be the issue, but the problem still persists. I dont know what could cause this problem. My computer is a dell laptop with AMD processor (I dont know if this is important). Any help is very appreciated.

  Read the article

• How do you remove old Windows Vista Backups?

  - by leeand00

  I've been backing up my Vista box using Complete PC backup for quite a while now, and I was just wondering how it is that you remove old backups when your backup drive is to full for another backup. I recently received the following error: The backup did not complete successfully. An error occurred. The following information might help you resolve the error: There is not enough space to save the backup files. Free up disk space or change your backup settings. (0x81000005) I don't see anything in the settings for the backup to change this. Do I have to mount the backup to delete an old backup? If so where is that file located?

  Read the article

• Windows 2000 Inaccessible Boot Device

  - by Foo_Chow

  I am working with a machine that had its motherboard die. The machine is running Windows 2000 for legacy software. After the motherboard died I used disk2vhd to perform a physical to virtual transfer. The drive data seemed to copy over to the vhd file well. However, whenever i try to boot I get a message saying Inaccessible Boot Device So far I have tried several things to fix it. fixMBR fixBoot chkdsk windows 2000 automated repair Also, I have attempted to open the registry of the vhd without any success. There is another fix that i have seen suggested that requires editing the registry. Is it possible to open a Windows 2000 hive in another OS or another copy of Windows 2000? One other thing to note is that the error appears in all of Virtual PC 2007, Hyper-V and VMWare Player. Does anyone know how to get past this?

  Read the article

• rsync to multiple destinations using same filelist?

  - by Dylan B.

  I'm wondering if it's possible for rsync to copy one directory to multiple remote destinations all in one go, or even in parallel. (not necessary, but would be useful.) Normally, something like the following would work just fine: $ rsync -Pav /junk user@host1:/backup $ rsync -Pav /junk user@host2:/backup $ rsync -Pav /junk user@host3:/backup And if that's the only option, I'll use that. However, /junk is located on a slow drive with quite a few files, and rebuilding the filelist of some ~12,000 files each time is agonizingly slow (~5 minutes) compared to the actual transfer/updating. Is it possible to do something like this, to accomplish the same thing: $ rsync -Pav /junk user@host1:/backup user@host2:/backup user@host3:/backup Thanks for looking!

  Read the article

• Windows 7 PC crashes after being locked a few minutes

  - by White Island

  I have a problem with an Optiplex 755 PC running (32-bit) Windows 7 Professional. I just installed the operating system last week, and ever since, it seems to crash when I lock the screen. It doesn't happen immediately; it's usually after I walk away, so a few minutes (but I'm not sure exactly how many). I have this non-specific error in the Event log. I've run a chkdsk, thinking it might be hard drive-related, but that didn't help. Any ideas on what to check and how are appreciated. :) Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/17/2010 3:09:28 PM Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: WORKSTATION.domain.local Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Event Xml: 41 2 1 63 0 0x8000000000000002 6250 System WORKSTATION.domain.local 0 0x0 0x0 0x0 0x0 false 0

  Read the article

• Exchanged HDD in MacBook Pro - OSX installation disk shows prohibitory sign

  - by Hedge

  I exchanged the HDD in my 2007 MacBook Pro and removed the dvd-drive because it was making terrible noise everytime I booted the MacBook. The new HDD is a Corsair Force F120 SATA SSD. Everytime I try to launch an OSX Lion installation disk or USB stick I get the grey prohibitory sign and the machine shuts down after a while. Since I didn't format the SSD beforehand there is still Windows 7 on it. It shows the white progress bar with the message "Windows is loading files" but never finishes it. I don't want Windows on that machine, just thought this fact may be important. Any ideas what is wrong?

  Read the article

• Windows XP SP3 install keeps rebooting

  - by TerryR

  The base fonts on my Windows XP Pro were corrupted. A suggested fix was to "install" XP again, essentially just to overwrite the WINNT folder hence resetting all the fonts. I downloaded the XP Pro SP3 installer from our corporate MSDN account, ran it straight from the HDD and at the very end it crashed and rebooted. Now it just keeps rebooting over and over after saying "Continuing installation...." I can't boot in Safe Mode, I can't get to a command prompt or anything. I'm out of ideas. Formatting the drive and performing a fresh install is NOT an option.

  Read the article

• Add multiple @groups to valid users

  - by skids89

  In smb.conf I have the line valid users = @Staff @Directors Is this a valid syntax to add two groups to the valid users line? It does not seem to work right on our xp pro clients. If not which of the following is the proper way (if any) to make two groups valid users of this network drive? Which is proper for windows clients? valid users = +Staff +Directors Or do I need to use the & valid users = &Staff &Directors Or some combo of the two? valid users = &+Staff &+Directors valid users = +&Staff +&Directors

  Read the article

• Booting off windows image through network

  - by Mr. Sir King Osman

  I have a HP st5742, which is a tower that does not have a hard drive and I am trying to boot it off the network, preferably off an image. It was designed along with the program HP Image Manager, however this program has been discontinued by HP and I can not seem to find a way to get a copy. If this helps, I am running my network with windows server 2008 R2 and would like the streaming client to be running windows. I have spent days searching for a way to deploy this machine however I can not seem to find a straight forward program, guide, or way to do this. I am new to this sort of thing but I willing to reading into the subject, all I need is a point in the right direction. Any help would be greatly appreciated.

  Read the article

• please explain my fio results - is O_SYNC|O_DIRECT misbehaving on linux?

  - by Zoltan

  I'm going mad over figuring out what the problem could be with one of our storage boxes. With a simple fio script I'm testing random writes using bs=1M and direct=1. The SSD is a Samsung 840pro attached to an LSI HBA (3Gbit/s ports). This is the result I'm getting under FreeBSD 9.1: WRITE: io=13169MB, aggrb=224743KB/s, minb=224743KB/s, maxb=224743KB/s, mint=60002msec, maxt=60002msec This is regardless of sync being set to 0 or 1. On linux, this is the result with sync=0: WRITE: io=14828MB, aggrb=253060KB/s, minb=253060KB/s, maxb=253060KB/s, mint=60001msec, maxt=60001msec and with sync=1: WRITE: io=6360.0MB, aggrb=108542KB/s, minb=108542KB/s, maxb=108542KB/s, mint=60001msec, maxt=60001msec My understanding is that since I'm operating on the raw block device, O_SYNC should not make any difference - there's no filesystem, any barrier, anything between the writes and the drive itself. Especially with O_DIRECT|O_SYNC set. Any ideas? For reference, here's the fio script I'm testing with: [global] bs=1M ioengine=sync iodepth=4 size=16g direct=1 runtime=60 filename=/dev/sdh sync=1 [rand-write] rw=randwrite stonewall

  Read the article

• Is there any way to do 'software raid' without losing data?I

  - by user1706582

  I say software raid because that is a pretty tentative guess at what I actually want. I have two drives, both with stuff already on them which I want to combine. If they weren't full of stuff (data, not windows installation) I would use software raid to combine them into one big drive or make them into one partition. I could probably do this with some complicated reference system but really I just want to be able to keep saving things to X: without running out of space until both drives are full. Thanks in advance.

  Read the article

• HP ML115 with P400 Smart Array Controller

  - by John

  Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

  Read the article

• Why does this monitor go to sleep but won't wake up, event though all related power options are turned off?

  - by VoidKing

  We have a machine, Windows 7 (64-bit) with ASUS motherboard, in our building that only sometimes seems to go to sleep, but won't wake up. The machine is still running but shaking the mouse or hitting keys on the keyboard won't wake it up. I have tried for days to isolate the problem, but every time we get to a "let's try this" scenario, it happens again, later. All power options related to display being off are set to never, except the simple, "turn display off after..." setting. That is, the hard drive is set to never turn off, and the computer is set to never sleep nor hibernate. All drivers seem to be up to date, but I am afraid I will hose the machine if I do a BIOS update (plus I figured that will probably have nothing to do with the issue and only make something else break). Wasn't sure if there was something obvious I was missing?

  Read the article

• Burning a Custom CD/DVD software Image

  - by Iceking007

  Hello I am trying to Burn a disk let me catch you up where I am at as I have a very SPECIFIC question and it may be difficult to explain but I will try to keep it simple: I have software already in an ISO file; I am using Daemon tools on a Windows based PC What I am wanting to do is create the actual Picture (not disk image file) that will show up on the Disk drive when I insert the disk Eg: if you put microsoft Office 11 in your comp. you open up My Computer to view all your HD and Disk drives you will see the image that microsoft put on the disk which is a silver CD and the Microsoft Office logo on the top corner. I would like to know how to edit my current ISO file or what I need to do in order to put "A PICTURE" or "AN ICON FILE" on the CD/DVD so that when I insert the disk into any PC it will show up with the PICTURE OR ICON file I chose and look proffessional. Thank you for your time

  Read the article

• How do you remove old Windows Vista Backups?

  - by leeand00

  I've been backing up my Vista box using Complete PC backup for quite a while now, and I was just wondering how it is that you remove old backups when your backup drive is to full for another backup. I recently received the following error: The backup did not complete successfully. An error occurred. The following information might help you resolve the error: There is not enough space to save the backup files. Free up disk space or change your backup settings. (0x81000005) I don't see anything in the settings for the backup to change this. Do I have to mount the backup to delete an old backup? If so where is that file located? Update Posted my question here

  Read the article

• GRUB Problem or Hardware Problem?

  - by Nikit Batale

  I have Windows XP Professional and Ubuntu Karmic Koala 9.10 on dual boot. I often get a GRUB loading failed error during boot-up. Or sometimes, when I try to boot into either Ubuntu or XP, I get a Could not read from source error. Now this is funny. After getting one of the above errors, if I simply unplug the SATA cable from Hard Drive end and plug it again, the problem gets solved. So what and whose problem is it? GRUB or My Hardware ? P.S.: I was suggested on StackOverflow that ServerFault is the right place for this question.

  Read the article

• Hyper-V core NIC speeds and registry changes

  - by gary

  Good afternoon, On a Dell PE T610 I have Hyper-V core running, with 2 x Broadcom BCM5709C NetXtreme II GigE installed. I have noticed that copying large files 17GB for example, from a network physical server to the Hyper-V host local drive [not vm guest] is very slow in comparison to copying from Physical to Physical servers. Copying a 17GB file physical to Hyper-V host takes 30 minutes Copying a 17GB file physical to physical host takes 15 minutes Can someone tell me exactly what registry nodes I should disable on Hyper-V NICs to improve performance. So far I have gone to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class{4 D36E972-E325-11CE-BFC1-08002BE10318} and set the following to 0 on both physical NICs: *LSOv1IPv4 *LSOv2IPv6 *TCPUDPChecksumOffloadIPv4 *TCPUDPChecksumOffloadIPv6 Should I also disable *TCPConnectionOffloadIPv4 & *TCPConnectionOffloadIPv6? Many thanks in advance

  Read the article

• bootmgr is missing

  - by jean

  I have a Toshiba and it is windows 7 and as soon as i turn my computer on it says bootmgr is missing. the only thing i can get into is the setup menu. does anyone know what might be wrong because my step brother thinks that it might be that everything was erased off my hard drive. the last thing he did when he used it was the toshiba updates and restarted the computer. so if any one knows what might be wrong or how i can get my computer up and running please let me know.

  Read the article

• ClamAV eating up all available disk space

  - by Ra

  Today I found that my Redhat server has run out of hard disk space. The culprit seems to be a program called Clamav that fills /tmp directory with thousands of subfolders with names like clamav-004adb870cd79534. All these folders contain this: drwx------ 2 root root 4.0K Apr 21 07:56 . drwxrwxrwt 68 root root 64K Apr 21 08:03 .. -rw------- 1 root root 18K Apr 21 07:56 COPYING -rw------- 1 root root 4.6M Apr 21 07:56 main.db -rw------- 1 root root 14K Apr 21 07:56 main.fp -rw------- 1 root root 1.5M Apr 21 07:56 main.hdb -rw------- 1 root root 901 Apr 21 07:56 main.info -rw------- 1 root root 33M Apr 21 07:56 main.mdb -rw------- 1 root root 16M Apr 21 07:56 main.ndb -rw------- 1 root root 217 Apr 21 07:56 main.zmd When I deleted them they got back and filled my hard drive in about an hour again. How do I go about this? Can I safely stop Clamav? It seems to me that Clamav is trying to upgrade unsuccessfully.

  Read the article

• Fix superblock size after dd?

  - by TreyK

  I've recently installed Linux Mint 11, and somehow my partition table ended up so that both it and the unallocated space for Windows 7 were inside an extended partition, which Windows didn't like when I tried to install. So, because I had spent a few hours configuring Mint already, I backed it up to my external hard drive using dd. I have restored it to the new partition I made for Mint, but new the partition isn't the same size as the one I dd'd from, so I'm getting yelled at for having a bad superblock size. Is there any way that I can fix this while keeping the new, smaller partition? -Trey

  Read the article

• What's the quickest way to install Windows 7?

  - by SaultDon

  I am wondering what the quickest/fastest way to install Windows 7 would be? I've read that you can make a bootable USB with unetbootin, or load the ISO contents to a separate partition/hard-drive and boot from there to install. Then I seen a method using imagex to copy the files needed onto a new partition which can be booted from directly, it takes ~7 minutes + ~5 min for the initial boot... I haven't tried it yet but would like to know if anyone knows of anything faster? If you could provide some instructions (step by step) would be great! The imagex method provides a good tutorial for example.

  Read the article

• Macbook Pro 2.66 GHz vs. 2.8 GHz

  - by nevan

  Is there much advantage in getting the higher end Macbook Pro compared to the mid-range one? The differences between the two are: 2.66 GHz vs. 2.8 GHz 256 MB graphics memory vs. 512 MB 3 MB L2 cache vs. 6 MB 320 GB hard drive vs. 500 GB $2000 vs. $2300 I've looked around, but I can't find any direct comparisons for the two machines. I'd be using the machine for development. I generally use a computer for 3 years. I don't really play games, but do use Photoshop regularly. I've heard that once Snow Leopard arrives, the graphics chip will be used to boost the main processor, so I was wondering if getting the one with more graphics memory would be an advantage?

  Read the article

• USB key to pass password in Centos 6

  - by Andrew

  I had a room mate that put a livecd in my desktop and looked around on my machine. I caught him in the act and threw him out. I haven't had a room mate for a while now and so as to avoid the livecd issue again I encrypted the hard drive, the machine is running centos 6.3. Is there anyway that I can avoid typing the password in each time if I have usb key in the machine to feed the password to the system? Additional question. Is there anything you can suggest to solve the problem I have ? Thanks

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >