Search Results

Search found 8923 results on 357 pages for 'wireless keyboard'.

Page 319/357 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• Live CD has black screen HP DV6

  - by Shaun Killingbeck

  Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

  Read the article

• Lock mouse in center of screen, and still use to move camera Unity

  - by Flotolk

  I am making a program from 1st person point of view. I would like the camera to be moved using the mouse, preferably using simple code, like from XNA var center = this.Window.ClientBounds; MouseState newState = Mouse.GetState(); if (Keyboard.GetState().IsKeyUp(Keys.Escape)) { Mouse.SetPosition((int)center.X, (int)center.Y); camera.Rotation -= (newState.X - center.X) * 0.005f; camera.UpDown += (newState.Y - center.Y) * 0.005f; } Is there any code that lets me do this in Unity, since Unity does not support XNA, I need a new library to use, and a new way to collect this input. this is also a little tougher, since I want one object to go up and down based on if you move it the mouse up and down, and another object to be the one turning left and right. I am also very concerned about clamping the mouse to the center of the screen, since you will be selecting items, and it is easiest to have a simple cross-hairs in the center of the screen for this purpose. Here is the code I am using to move right now: using UnityEngine; using System.Collections; [AddComponentMenu("Camera-Control/Mouse Look")] public class MouseLook : MonoBehaviour { public enum RotationAxes { MouseXAndY = 0, MouseX = 1, MouseY = 2 } public RotationAxes axes = RotationAxes.MouseXAndY; public float sensitivityX = 15F; public float sensitivityY = 15F; public float minimumX = -360F; public float maximumX = 360F; public float minimumY = -60F; public float maximumY = 60F; float rotationY = 0F; void Update () { if (axes == RotationAxes.MouseXAndY) { float rotationX = transform.localEulerAngles.y + Input.GetAxis("Mouse X") * sensitivityX; rotationY += Input.GetAxis("Mouse Y") * sensitivityY; rotationY = Mathf.Clamp (rotationY, minimumY, maximumY); transform.localEulerAngles = new Vector3(-rotationY, rotationX, 0); } else if (axes == RotationAxes.MouseX) { transform.Rotate(0, Input.GetAxis("Mouse X") * sensitivityX, 0); } else { rotationY += Input.GetAxis("Mouse Y") * sensitivityY; rotationY = Mathf.Clamp (rotationY, minimumY, maximumY); transform.localEulerAngles = new Vector3(-rotationY, transform.localEulerAngles.y, 0); } while (Input.GetKeyDown(KeyCode.Space) == true) { Screen.lockCursor = true; } } void Start () { // Make the rigid body not change rotation if (GetComponent<Rigidbody>()) GetComponent<Rigidbody>().freezeRotation = true; } } This code does everything except lock the mouse to the center of the screen. Screen.lockCursor = true; does not work though, since then the camera no longer moves, and the cursor does not allow you to click anything else either.

  Read the article

• MySQL Connect Keynotes and Presentations Available Online

  - by Bertrand Matthelié

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following the tremendous success of MySQL Connect, you can now watch some of the keynotes online: The State of the Dolphin – by Oracle Chief Corporate Architect Edward Screven and MySQL Vice President of Engineering Tomas Ulin 72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} MySQL Perspectives – featuring power users of MySQL who share their experiences and perspectives: Jeremy Cole, DBA Team Manager, Twitter Daniel Austin, Chief Architect, PayPal Ash Kanagat, IT Director; and Shivinder Singh, Database Architect, Verizon Wireless You can also access slides from a number of MySQL Connect presentations in the Content Catalog. Missing ones will be added shortly (provided the speakers consented to it). Enjoy!

  Read the article

• How do I stop icons appearing on the desktop under conky?

  - by Seamus

  When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}

  Read the article

• Five Fake Sounds Engineered to Make Your Feel Better [Science]

  - by Jason Fitzpatrick

  As objects in our environment (like cars, ATMs, and phones) have grown lighter and quieter scientists have been carefully engineering their sounds so that they continue to sound like we expect them to. Read on to see how. At the design blog Humans Invent they share five interesting ways that the world around us is being engineered so it sounds the way we expect it to. They start with the example of the car door. Years ago cars were almost entirely steel, the doors were weighty, and when you slammed them it sounded like one big hunk of steel locking into another big hunk of steel (which, in fact, it was). Newer cars are lighter but people still crave that substantial clunk. Humans Invent highlights the effect of consumer desire: A car door is essentially a hollow shell with parts placed inside it. Without careful design the door frame amplifies the rattling of mechanisms inside. Car companies know that if buyers don’t get a satisfying thud when they close the door, it dents their confidence in the entire vehicle. To produce the ideal clunk, car doors are designed to minimise the amount of high frequencies produced (we associate them with fragility and weakness) and emphasise low, bass-heavy frequencies that suggest solidity. The effect is achieved in a range of different ways – car companies have piled up hundreds of patents on the subject – but usually involves some form of dampener fitted in the door cavity. Locking mechanisms are also tailored to produce the right sort of click and the way seals make contact is precisely controlled. On average it takes 1.8 seconds to close a car door but in that time you’re witnessing a strange kind of symphony composed by engineers and designers whose goal is to reassure you that its rock solid. They mention lock mechanisms, something you may never have thought about. A friend of mine had a Ford Focus some years ago and that particular model had electric locks that, instead of giving a satisfying thunk or solid click, made this horrible gates-of-the-prison-buzzing sound that was completely unnerving. Hit up the link below to see how sounds are engineered for car doors, electric motors, ATM machines, and more. 5 Fake Sounds Designed to Help Humans [Humans Invent via Boing Boing] How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• TouchDevelop: The Fast Path to Windows 8 and Phone Apps

  - by Clint Edmonson

  Are you looking for a little extra cash for the upcoming holidays? Then you might be interested in creating some cool apps to sell in the Windows Store. Or maybe you’re simply curious and want to try your hand at developing for Windows 8 and Windows Phone. In either case, the newly released TouchDevelop Web App is for you. TouchDevelop Web App is a development environment to create apps on your tablet or smartphone, without requiring a separate PC. Scripts written by using TouchDevelop can access data, media, and sensors on the phone, tablet, and PC. The script can interact with cloud services, including storage, computing, and social networks. TouchDevelop lets you quickly create fun games and useful tools, turning your scripts into true Windows Phone and Windows 8 apps. A year ago, Microsoft Research released TouchDevelop for Windows Phone, which is being used by enthusiasts, students, and researchers to program their phones in fun, inventive, and interesting ways. These scripts are available at TouchDevelop for anyone to download and use. Ever since we released TouchDevelop, we’ve been eyeing the tablet form factor and working on a version for the browser. Now, with the release of TouchDevelop Web App, the wait is over: the tablet version is ready, so go play around with it. All TouchDevelop scripts that are developed on the smartphone can be downloaded to the tablet and run (if hardware allows). Any script that is developed on the tablet can also be accessed on the phone. And scripts can be converted to Windows Phone or Windows 8 apps and submitted to the Windows Phone Store or Windows Store, respectively. TouchDevelop Web App’s editor and programming language have been designed for tablet devices with touchscreens, but you can also use a keyboard and a mouse. So grab your web-enabled device and give the TouchDevelop Web App a try. It’s fun and easy, and could even put a little cash in your holiday-depleted wallet. Or at least give you bragging rights at family get-togethers. Are you interested in further tips on Windows 8 development?  Sign up for the 30 to launch program which will help you build a Windows Store application in 30 days.  You will receive a tip per day for 30 days, along with potential free design consultations and technical support from a Windows 8 expert. As always, stay tuned to my twitter feed for Windows 8, Windows Azure and other Microsoft announcements, updates, and links: @clinted

  Read the article

• Monitor the Weather from Your Windows 7 Taskbar

  - by Asian Angel

  Keeping up with the weather forecast can be hard when you are extra busy with work. If you need a simple but nice looking way to integrate weather monitoring into your Taskbar then join us as we look at WeatherBar. Setting Up & Using WeatherBar To get started unzip the following files, place them in an appropriate “Program Files Folder”, and create a shortcut. When you start WeatherBar for the first time you will be presented with the following window and a random/default location. To get WeatherBar set up for your location there are only two settings to adjust (using the “Pencil & Gear Buttons”). Clicking on the “Pencil Button” will open up this small window…enter the name of your location and click “OK”. Next click on the “Gear Button” where you can choose the “Update Interval” and “Measurement Format” that best suits your needs. Click “OK” when finished and WeatherBar will be ready to go. That definitely looks nice. When you are finished viewing this window minimize it to the “Taskbar Icon” instead of clicking on the “Close Button”…otherwise the entire app will close. Left click on the “Taskbar Icon” to bring the window back up… Hovering the mouse over the “Taskbar Icon” provides a nice thumbnail of the weather forecast. Right clicking on the “Taskbar Icon” will display a nice mini forecast. Conclusion While WeatherBar may not be for everyone it does provide a nice easy way to monitor the weather from your “Taskbar” without taking up a lot of room. Links Download WeatherBar Similar Articles Productive Geek Tips Monitor the Weather for Your Location in ChromeCheck Weather Conditions in Real-time with Weather WatcherMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersTaskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Cursor running wild, then crashes on an Asus G73sw

  - by Yarchmon

  The cursor sometimes goes wild, I get random clicks, the windows are resizing, the cursor disappears. In the worst case, clicks and keyboards are disabled. I've tried the solution given on doc.ubuntu-fr.org and add tu grub : i8042.nomux=1 i8042.reset=1 in GRUB_CMDLINE_LINUX_DEFAULT But it didn't work What can I do ? Graphic card : Geforce GTX460M. Ubuntu : 11.10 (64 bits). Laptop Asus G73sw Interface : Unity (since 11.10) - didn't get this problem with Gnome before. Complement: when a window is resizing, it gets drag-boxes at every corner, center of sides and center of the window. It looks like my touchpad sends random info, or like a "ghost" touchscreen. lspci result : 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GTX 460M] (rev a1) 01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Edit 01-09-12: Tried on Ubuntu 2D: the behavior is different: it's like i'm randomly clicking on the workspace switcher icon. In the worst case, it can happen several times in a minute.

  Read the article

• It's Here! Visual Studio 2010 and ASP.NET 4.0 Ship

  Today Microsoft released Visual Studio 2010 and ASP.NET 4.0. I've been using the RC version of Visual Studio 2010 quite a bit for the past couple of months and have really grown to like it. It has a host of features and enhancements that improve developer productivity, from improved IntelliSense to better multiple monitor support. Plus there's something about the user experience that, to me, makes it feel better than Visual Studio 2008. I don't know if it's the new blue color motif or what, but the IDE seems more modern looking and more responsive to my mouse movements and other input. Anyway, if you've not yet downloaded Visual Studio 2010 and ASP.NET 4.0, why not? As with previous versions of Visual Studio there's a free Express Edition and VS2010 and ASP.NET 4.0 runs side-by-side with earlier versions of Visual Studio and ASP.NET. And with Visual Studio 2010's multi-targeting you can even use VS2010 as your development editor for ASP.NET 2.0 and ASP.NET 3.5 web applications. (Although be forewarned if you have multiple developers working on the application that the project files in VS2010 and earlier versions of Visual Studio differ.) This week's article on 4Guys explores my favorite new features of Visual Studio 2010. Here's an excerpt: The Visual Studio 2010 user experience is noticeably different than with previous versions. Some of the changes are cosmetic - gone is the decades-old red and orange color scheme, having been replaced with blues and purples - while others are more substantial. For instance, the Visual Studio 2010 shell was rewritten from the ground up to use Microsoft's Windows Presentation Foundation (WPF). In addition to an updated user experience, Visual Studio introduces an array of new features designed to improve developer productivity. There are new tools for searching for files, types, and class members; it's now easier than ever to use IntelliSense; the Toolbox can be searched using the keyboard; and you can use a single editor - Visual Studio 2010 - to work on. This article explores some of the new features in Visual Studio 2010. It is not meant to be an exhaustive list, but rather highlights those features that I, as an ASP.NET developer, find most useful in my line of work. Read on to learn more! And, in closing, here are some helpful VS2010 and ASP.NET 4.0 links: One click installation for ASP.NET 4.0, Visual Web Developer 2010, .NET Framework 4.0, and ASP.NET MVC 2 Eight Quick Hit videos showing some of the cool new VS2010 features VS2010 and ASP.NET 4.0 Release Announcement with some great info/links from none other than Scott Guthrie Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Best way to remote restart Ubuntu from Windows machine

  - by robsoft

  Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

  Read the article

• Data Model Dissonance

  - by Tony Davis

  So often at the start of the development of database applications, there is a premature rush to the keyboard. Unless, before we get there, we’ve mapped out and agreed the three data models, the Conceptual, the Logical and the Physical, then the inevitable refactoring will dog development work. It pays to get the data models sorted out up-front, however ‘agile’ you profess to be. The hardest model to get right, the most misunderstood, and the one most neglected by the various modeling tools, is the conceptual data model, and yet it is critical to all that follows. The conceptual model distils what the business understands about itself, and the way it operates. It represents the business rules that govern the required data, its constraints and its properties. The conceptual model uses the terminology of the business and defines the most important entities and their inter-relationships. Don’t assume that the organization’s understanding of these business rules is consistent or accurate. Too often, one department has a subtly different understanding of what an entity means and what it stores, from another. If our conceptual data model fails to resolve such inconsistencies, it will reduce data quality. If we don’t collect and measure the raw data in a consistent way across the whole business, how can we hope to perform meaningful aggregation? The conceptual data model has more to do with business than technology, and as such, developers often regard it as a worthy but rather arcane ceremony like saluting the flag or only eating fish on Friday. However, the consequences of getting it wrong have a direct and painful impact on many aspects of the project. If you adopt a silo-based (a.k.a. Domain driven) approach to development), you are still likely to suffer by starting with an incomplete knowledge of the domain. Even when you have surmounted these problems so that the data entities accurately reflect the business domain that the application represents, there are likely to be dire consequences from abandoning the goal of a shared, enterprise-wide understanding of the business. In reading this, you may recall experiences of the consequence of getting the conceptual data model wrong. I believe that Phil Factor, for example, witnessed the abandonment of a multi-million dollar banking project due to an inadequate conceptual analysis of how the bank defined a ‘customer’. We’d love to hear of any examples you know of development projects poleaxed by errors in the conceptual data model. Cheers, Tony

  Read the article

• nvidia optimus laptops

  - by kellogs

  kellogs@kellogs-K52Jc ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80) 03:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 80) 03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) kellogs@kellogs-K52Jc ~ $ inxi -SGx System: Host: kellogs-K52Jc Kernel: 3.5.0-17-generic x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.9.5 (Qt 4.8.3) Distro: Linux Mint 14 Nadia Graphics: Card: Intel Core Processor Integrated Graphics Controller bus-ID: 00:02.0 X.Org: 1.13.0 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Mesa DRI Intel Ironlake Mobile GLX Version: 2.1 Mesa 9.0.3 Direct Rendering: Yes Manufacturer advertises the K52Jc model which I bought as optimus enabled. However, no traces of it in the output above. Of course, Bumblebee would not start on this machine. Should I rest assured that is a defective / un-optimused machine ? thanks

  Read the article

• Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

  - by user287602

  Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

  Read the article

• Looking for an ultra portable laptop for Ubuntu

  - by prule

  Hi, I'm in the market for a new laptop, and portability is important since I really only use it when I'm travelling to and from work - primarily for programming. I've been searching high and low for something like this: less than 2kg hopefully Intel i5 (but negotiable) NO dvd drive - just don't need it 4G ram either 7200rpm disk or SSD (ssd preferable) 13 inch screen not too pricey (MacBook Air is about $1700 AUD) available in Australia The Dell Inspiron 13z and Lenovo Edge 13 look close, but I've not found anything that says I'm not going to have a fight with compatibility. The MacBook Air 13 looks like the PERFECT hardware, but I'm afraid it will just be easier to run MacOS than Ubuntu. I want to stay with Ubuntu, but the MacBook Air is only $1700 so I'm in danger of becoming another apple fanboi if I can't find anything competitive. Going through all the sites looking for stuff has been a huge waste of time System 76 doesn't deliver to Australia http://www.linux-laptop.net/ and http://www.linlap.com/ are hard work and not confidence inspiring http://www.vgcomputing.com.au/nsintro.html is hard work again, searching for every laptop they say has excellent compatibility on the web to find out what spec it is http://zareason.com/shop/Strata-Pro-13.html (at $1345 USD) looks interesting, but I've got no idea how much I'll get stung by customs importing Dell Inspiron 13z with i5, 4G, 320 7200rpm disk, ATI Mobility Radeon HD5430 - 1GB, Dell Wireless 1501 802.11b/g/n @ $1200 AUD seems like the only competitor but is it compatible? (Dell support offer no opinion - as far as they are concerned they only have 2 models that are certified for ubuntu) Am I worrying too much about the compatibility? Should I just go with Dell? Or switch to MacOS? (It would be good to have a searchable database that had the full machine specs, and compatibility - I'm thinking about building something... but I don't have much time right now...) Thanks. UPDATE I went with a MacBook Air. The price/weight/power was just right. Everything else was either too pricy (i5) or too heavy, or underpowered (SU7300 1.3GHz). Its a pity, because I didn't really want to leave Ubuntu. I'll still run it on my media center and spare (heavy) laptop.

  Read the article

• Unity Dash and top toolbar won't open after updating to 12.10

  - by pgrytdal

  Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• why are my players drawn to the side of my viewport

  - by Jetbuster

  Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

  Read the article

• My co-worker has not been doing such a good job for the past decade. What do I do? [closed]

  - by stijn

  Possible Duplicate: How do I approach a coworker about his or her code quality? I started working with him almost a decade ago and back then I had never really programmed before, being a young hardware engineer. Right now however I have made quite some progress in all areas being part of software design and i am much, much more skilled than my co-worker who is 15 years older and has been programming more than twice as long. He is super nice and definitely smart enough, but lately his lack of skill and performance are starting to drag me down because we're more and more working on the same codebase. And soon we are going to do a quite ambitious start from scratch creating a whole new hard/software system. I feel it is time to address all issues now, but i do not know how to start. Here are some of the things that I would like to see him improve on: no consistent usage of style, spaces nor tabs (eg if(something ) a =b ) adds newlines around pieces of code to make it easier to read, then commits those with messages like 'no changes made' overall commit messages are useless and so are most of the comments, if there are any (eg 'remove solves for bug Rik' if Rik reported a bug). There is no function/class documentation. lots of spelling errors, in both English and native language, which sometimes are mixed 6/7/8 level deep deep nesting is no exception, a lot of functions start with one level already like if(ptr!=Null){ even when ptr is the result of allocation via new in the constructor numerous source files have over 10k lines of those lines, a major part is simply a result of copy-pasting functionality instead of using a function. This includes copying comments so we end up with 50 occurrences of var=NULL; //TODO TEST this!!!!!!! another part is hundreds of lines of dead code knows what versioning does, yet comments out old code and places new code underneath it when making changes coding skills are below par, especially for the type of rather high precision applications we do. Yet somehow, after a lot of trying and testing, stuff starts to work. But then breaks again some time later because every change casues a waterfall effect. violates every single item in the C++ FAQ lite, practices every bad practice I can think of still doesn't know how to properly use the debugger, but spends hours inspecting messy logfiles in notepad on a tiny laptop screen. Does not make any adjustments to the settings of the software he uses. Never uses keyboard shortcuts. does not seem to progress or learn new things at all. Work rather slow, mostly due to the lack of planning and incorrect usage of tools. How does one deal with this? For starters, how do I make him aware of all these problems? Should I tell the staff about it? And the next step, how to get him to learn new things and adopt another way of working?

  Read the article

• Can't boot Ubuntu 12.10 graphics problem

  - by Frantumn

  I can't boot since installing Ubuntu 12.10 When I try to run Ubuntu My computer never gets to the Ubuntu screen with the loading dots. I tried to run in recovery mode with safe graphics (failsafex) When I do this a message pops up saying "the system is running in low graphics mode", If I click okay I am asked what would I like to do and am given four options. I tried running low graphics for one session and then a message appears with a progress bar and says standby one minute while the display restarts. The progress bar never moves and if I click okay the whole process just restarts. I Don't know what to do from here I can't get into the OS. I'm not sure whether the problem is related to compatibility with my laptop monitor or my graphic card nvidia360m I had to install using a safe graphics mode. To learn about how I installed see this link. This link also has information on my computer hardware. Can't install Ubuntu since 10.10 ----UPDATE--- I was able to get into a desktop environment By installing Nvidia-current however it is messy. I have a screen and I am able to see my desktop however there is no unity bar and none of the keyboard controls work. I can right click and create a folder on the desktop and then I can see inside that folder in a traditional browser window. There is still no top menu or unity bar. When I boot normally I don't get into the desktop environment and I get this message in tty 'GPU lockup switching to software FBCON' Okay, I've played around with tips the pages from comments. I've been able to consistantly get into a safemode desktop environment using the xorg & nouveau drivers. I've tried switching between the 5 different options in the Additional Drivers tab in Software Sources. The nVidia (proprietary, tested) driver gets beyond the GPU lockup on a normal boot and actually gets into a Desktop. The issue is then that there is no Unity bar, or top screen menu bar and the resolution is very low. I've tried switching to the (prop, tested) driver and then reinstalling Unity and Ubuntu-Desktop but that didn't work either.

  Read the article

• Top down space game control problem

  - by Phil

  As the title suggests I'm developing a top down space game. I'm not looking to use newtonian physics with the player controlled ship. I'm trying to achieve a control scheme somewhat similar to that of FlatSpace 2 (awesome game). I can't figure out how to achieve this feeling with keyboard controls as opposed to mouse controls though. Any suggestions? I'm using Unity3d and C# or javaScript (unityScript or whatever is the correct term) works fine if you want to drop some code examples. Edit: Of course I should describe FlatSpace 2's control scheme, sorry. You hold the mouse button down and move the mouse in the direction you want the ship to move in. But it's not the controls I don't know how to do but rather the feeling of a mix of driving a car and flying an aircraft. It's really well made. Youtube link: FlatSpace2 on iPhone I'm not developing an iPhone game but the video shows the principle of the movement style. Edit 2 As there seems to be a slight interest, I'll post the version of the code I've used to continue. It works good enough. Sometimes good enough is sufficient! using UnityEngine; using System.Collections; public class ShipMovement : MonoBehaviour { public float directionModifier; float shipRotationAngle; public float shipRotationSpeed = 0; public double thrustModifier; public double accelerationModifier; public double shipBaseAcceleration = 0; public Vector2 directionVector; public Vector2 accelerationVector = new Vector2(0,0); public Vector2 frictionVector = new Vector2(0,0); public int shipFriction = 0; public Vector2 shipSpeedVector; public Vector2 shipPositionVector; public Vector2 speedCap = new Vector2(0,0); void Update() { directionModifier = -Input.GetAxis("Horizontal"); shipRotationAngle += ( shipRotationSpeed * directionModifier ) * Time.deltaTime; thrustModifier = Input.GetAxis("Vertical"); accelerationModifier = ( ( shipBaseAcceleration * thrustModifier ) ) * Time.deltaTime; directionVector = new Vector2( Mathf.Cos(shipRotationAngle ), Mathf.Sin(shipRotationAngle) ); //accelerationVector = Vector2(directionVector.x * System.Convert.ToDouble(accelerationModifier), directionVector.y * System.Convert.ToDouble(accelerationModifier)); accelerationVector.x = directionVector.x * (float)accelerationModifier; accelerationVector.y = directionVector.y * (float)accelerationModifier; // Set friction based on how "floaty" controls you want shipSpeedVector.x *= 0.9f; //Use a variable here shipSpeedVector.y *= 0.9f; //<-- as well shipSpeedVector += accelerationVector; shipPositionVector += shipSpeedVector; gameObject.transform.position = new Vector3(shipPositionVector.x, 0, shipPositionVector.y); } }

  Read the article

• Lenovo W520 back usb port not working

  - by jaudette

  The usb port in the back of my laptop (on the right side when viewed from using perspective) is not working. Does anybody know if we can get this port working, and what the port number is. Here is my lsusb, if it can help. % lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse Bus 003 Device 003: ID 046d:c318 Logitech, Inc. Illuminated Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0765:5001 X-Rite, Inc. Huey PRO Colorimeter Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader I am running 12.10, upgraded from 12.04 but it did not work either in 12.04. The two usb ports on the left work just fine. EDIT: I just updated my bios from 1.32 to 1.39, no change in behaviour. The port does not even power up my devices. EDIT 2: Booted up windows, and the port is working. I went into the device manager and looked at the USB settings. I found my USB drive on Port 2, Hub 3, i just don't know how that relates to the Bus and Device numbers of linux. In windows, Smart card reader was on USB hub located at port 1 hub 2, fingerprint and bluetooth were on USB hub located at port 1 hub 1 EDIT 3: Went and looked at this SO post. Tried to look at my kern.log file with tail -f /var/log/kern.log. Got some activity when plugging/removing devices in other ports, but nothing happens when connecting a device into that port. It really looks disabled. Looked at my usb1-4 sys/bus/usb/devices/usb1/power/control and they are all set on auto. As expected, usb4 have version 3.00, the others (usb1-usb3) are 2.00.

  Read the article

• Simple thruster like behaviour when rotating sprite

  - by ensamgud

  I'm prototyping some 2D game concepts with XNA and have added some basic keyboard inputs to control a triangle sprite. When I press key up the sprite accelerates in it's current facing direction, when I release the key it brakes down. For rotation, when I press left/right keys I rotate the sprite. Currently the sprite immedately changes direction when I rotate it. What I want is for it to keep moving in the same direction when I rotate, until I hit key up, adding thrust in whatever direction the sprite is pointing at. This would simulate thrusters on a classic space shooter like Asteroids. I'm adding an image to describe the behaviour I'm after and some code samples of how I'm doing things at the moment. This is my player struct, holding information of the sprite. public struct PlayerData { public Vector2 Position; // where to draw the sprite public Vector2 Direction; // travel direction of sprite public float Angle; // rotation of sprite public float Velocity; public float Acceleration; public float Decelleration; public float RotationAcceleration; public float RotationDecceleration; public float TopSpeed; public float Scale; } This is how I'm currently handling thrusting / braking (when pressing/releasing key up) (simplified, removed some bounds checking etc): player.Velocity += player.Acceleration * 0.1f; player.Velocity -= player.Acceleration * 0.1f; And when I rotate the sprite left and right: player.Angle -= player.RotationAcceleration * 0.1f; player.Angle += player.RotationAcceleration * 0.1f; This runs in the update loop, keeps the direction updated and updates the position: Vector2 up = new Vector2(0f, -1f); Matrix rotMatrix = Matrix.CreateRotationZ(player.Angle); player.Direction = Vector2.Transform(up, rotMatrix); player.Direction *= player.Velocity; player.Position += player.Direction; I am following along various beginner tutorials and haven't found any describing this, but I have tried some on my own without success. Do I need to change my velocity and acceleration fields to Vectors instead of floats to accomplish this type of movement? I realise my Angle and the Direction vector is currently tied together and I need to disconnect these somehow to be able to rotate freely without changing the direction of the movement, but I can't quite figure out how to do this while keeping the acceleration/decceleration functional. Would appreciate an explanation rather than pure code samples. Thanks,

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by Torben Gundtofte-Bruun

  My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

  Read the article

• why are my players drawn top the side of my viewport

  - by Jetbuster

  Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

  Read the article

• What You Said: Staying Productive While Working from home

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your telecommuting/work-from-home productivity tips. Now we’re back with a tips and tricks roundup; read on to see how your fellow readers stay focused at home. By far and away the most common technique deployed as carefully isolating work from home life. Carol writes: I love working from home and have done so for 6 years now. I have a routine just as if I was going to an office, except my commute is 12 steps. I get ready for work, grab my purse and smart phone and go to up the steps to my office. I maintain a separate phone line and voice mail for work that I cannot answer from anywhere but my work desk. I use call forwarding when I travel so only my office phone number is published. I have VOIP phone service so I can forward calls from the internet if I forget, or need to change where the phone is forwarded. I do have a wired and wireless head set so I can go get a cold drink if on one of those long boring conference calls. I plan my ‘get off from work’ time and try to stick to it, as with any job some days I am late getting off, but it all works out. I make sure my office is for work only, any other computer play time is in a different part of the house on different computer. My office has laptop, dock, couple of monitors, multipurpose printer, fax, scanner, file cabinets – just like the office at a company. I just also happen to have a couple of golden retrievers that come to work with me and usually lay quietly until 5, and yes they know it is 5pm sometimes before I do. For me, one of the biggest concerns when working from home is not being unproductive, but the danger of never stopping work. You could keep going and going because let’s face it – the company will let you do it, so I set myself up to prevent that and maintain a separateness. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >