Search Results

Search found 26335 results on 1054 pages for 'external display'.

Page 32/1054 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Cannot use second display with 12.04 and Intel 2000/3000

  - by Carolyn Marenger

  I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

  Read the article

• Referencing external javascript vs. hosting my own copy

  - by Mr. Jefferson

  Say I have a web app that uses jQuery. Is it better practice to host the necessary javascript files on my own servers along with my website files, or to reference them on jQuery's CDN (example: http://code.jquery.com/jquery-1.7.1.min.js)? I can see pros for both sides: If it's on my servers, that's one less external dependency; if jQuery went down or changed their hosting structure or something like that, then my app breaks. But I feel like that won't happen often; there must be lots of small-time sites doing this, and the jQuery team will want to avoid breaking them. If it's on my servers, that's one less external reference that someone could call a security issue If it's referenced externally, then I don't have to worry about the bandwidth to serve the files (though I know it's not that much). If it's referenced externally and I'm deploying this web site to lots of servers that need to have their own copies of all the files, then it's one less file I have to remember to copy/update.

  Read the article

• "Can't open display" even after access with xhost

  - by Yann

  I'm trying to run a graphical program remotely, without using ssh. I've set the display variable on the server (let's say server.com, Linux, not ubuntu, and no su rights) to point to my workstation (workstation.com, ubuntu 10.04) setenv DISPLAY workstation.com:0 Then on my workstation I've tried both xhost +server.com and xhost + Then I ssh into the server (to test things): ssh [email protected] and try to run xclock, and get the following error: Error: Can't open display: workstation.com:0 I've looked at /etc/ssh/ssh_config on the workstation and I should be forwarding correctly: X11Forwarding yes. How do I go about troubleshooting this? What logs on the workstation document these failed attempts? To explain why I'm doing this: I want to run a batch job on a server to debug an MPI-based parallel program. I want to run xterm as the batch job executable, per the instructions provided by the system admins. This setup use to work. I reinstalled things on my workstation and since then I frequently get one-time message along the lines The authenticity of host 'hostname (XXX.XXX.XXX.XX)' can't be established. My attempt to fix the above was to move my ~/.ssh/known_hosts file to a back up on both server and host, and then to ssh from each to the other with the flag -o StrictHostKeyChecking=no. I no longer get that message, but I was wondering does this play a part in why X11 forwarding is not working?

  Read the article

• Port forward based on external IP (for VPS hosting)

  - by Ben Alter

  What I want to do is to host a VPS. First, I'd like to set up a static IP address that forwards to my home IP address (so I can have more than one IP coming into my house). How can I do this without contacting my ISP (and is it even possible?; I don't care about paying for something that does this). Once I have the extra external IP address, how can I forward it to my VPS? How is my router supposed to differentiate between two separate external IP addresses?

  Read the article

• How do I fix broken installation?

  - by Daniel

  Let me start off by saying I'm dual booting 11.04 and Windows 7 on a Thinkpad T61p. The problem may have arisen when I hit the power button during normal startup. I'm fully aware how stupid this is. I don't know why I did it. I did it. Now, I can't get in to Ubuntu. Windows works fine. But when I try to start Ubuntu normally, it seems to run some checks, and does not start up. Sometimes, I see a black screen, and it tells me that it's running certain checks, and then, [ok]. Like... Battery Check Somethingorother [ok] It'll give me 1-5 of these. And then it just does nothing, and I have to turn it off. When I try to start in safe mode... I tried low graphics mode, and after going through a couple of dialogue boxes, I'm brought right back to the safe mode dialogue box. And if I hit 'resume,' a shell pushes up (still that grey on black "your computer is broken" type shell) and asks me to log in. I do, and try to run unity. It tells me something along the lines of: WARNING no DISPLAY variable set and then sets it to " :0" , which doesn't work. And then I can't do anything, really, and I have to restart. (I don't know how to do this from the command line, so I just hard reset. That command would be helpful). Does anybody have any idea how I can get Ubuntu working right again? FTP is less pleasant in Explorer than it is in Nautilus or w/e it is now.

  Read the article

• Slow transfer to external USB3 hard drive

  - by JMP

  Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to transfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive transferring this amount in windows. But don't have that option at the moment.

  Read the article

• How to disable integrated webcam and still be able to use an external one

  - by alikasundara

  I am looking for a way to disable the webcam that is integrated into my laptop. The webcam is using uvcvideo module but I do not want to blacklist it since it is also being used by an external webcam I have. Is there any way of disabling the device itself without touching the modules list? This is how the webcams are listed by lsusb. The first one is an integrated one (It is identified by some apps as BisonCam NB Pro), the second one is the external Logitech C525: Bus 002 Device 004: ID 5986:0361 Acer, Inc Bus 003 Device 002: ID 046d:0826 Logitech, Inc. I have already checked BIOS - there is no way of disabling the webcam from there. Besides I would love to learn how to disable the device by ID anyway. Thanks!

  Read the article

• radeon display driver clones monitors while using Xinerama

  - by gregmuellegger

  I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

  Read the article

• Passing variable from SharePoint to external website

  - by TechDaddyK

  My company has a SharePoint site that is administered by the IT department (versus the Web Developer... go figure!). We have partnered with a vendor that has built a site for our staff to order customized stationery, etc. I need to create a link on the SharePoint site that will take the user to the external site but identify them individually. The vendor is suggesting this format: https://www.VENDORSITE.com/UI/Profile.hcf?id=a02b8106-4115-47cd-bca7-ce4dd447ef89&username=<user name>&password=<password>&name1=<first name>&name2=<last name>&email=<email> Here's the problem: I don't know how to pass that info, or even a single variable, from the SharePoint site to the external site. I would appreciate ANY suggestions.

  Read the article

• External classes positions don't work?

  - by SystemNetworks

  I have an external class which reads the user's mouse clicks. I gave a position where the user have to click, and when the user clicks on that position, it would turn my boolean "mouse" to true. But when I connect that to my game(state based) class, it does not work. Here's the code: External class public void UI(Input input, GameContainer gc, float posX, float posY) { int x = Mouse.getX(); int y = Mouse.getY(); if(posX<=100 && posY<=100) { if(Mouse.isButtonDown(1)) { mouse = true; } } } Game class(main) public void update(GameContainer gc, StateBasedGame sbg, int delta) throws SlickException { int x = Mouse.getX(); int y = Mouse.getY(); civ.UI(input, gc, x,y); } The problem is when I click my mouse at posX<=100 && posY<=100. It does not work.

  Read the article

• RetinaPad Enables Retina Display for iPhone Apps on the iPad

  - by Jason Fitzpatrick

  RetinaPad is an iPad application that actives the Retina Display resolution on iPhone applications to increase the clarity on the iPad. It’s a feature that should be built-in but is currently only available for jailbroken iPads. The premise is simple. Currently iPads lack support for the Retina Display level resolution that iPhone apps are capable of if displaying. RetinaPad allows you to stop using the ugly and blocky simple doubling available on the iPad and start accessing the higher resolution Retina Display mode for iPhone applications on the iPad. It’s such a trivial thing that it’s outright shameful Apple doesn’t include it by default. You should have to jailbreak your device to unlock functionality that should be there right from the factory. Check out the demo video below to see it in action: Fire up your jailbroken iPad, launch Cydia and search for RetinaPad. Retina Pad is $2.99, iPad only. How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

  Read the article

• Turn a Kindle into a Weather Display Station

  - by Jason Fitzpatrick

  The e-ink display, network connectivity, and low-power consumption of Kindle ebook readers make them a perfect candidate for an infrequently refreshed high-visibility display–like a weather display. Read on to see how to hack a Kindle to serve up the local weather. Tinker and hardware hacker Matt Petroff hacked his Kindle to accept input from a web server and then, graciously and in the spirit of geeky projects everywhere, shared his source code. He explains the heart of the project: The server side of the system uses shell and Python scripts to convert weather forecast data into an image for the Kindle. The scripts first download and parse forecast data from NOAA via the National Digital Forecast Database XML/SOAP Service. After parsing the data, the data then needs to be converted into an image. This is accomplished by preprocessing a specially crafted SVG file to insert temperatures, forecast symbols, and days of the week. This SVG is then rendered as a PNG using rsvg-convert and converted to a grayscale, no transparency color space as required by the Kindle using pngcrush. Finally, it is copied to a public location on the web server. The Kindle is set to refresh twice a day (you could easily tweak the scripts for a more frequent refresh) and displays the forecast as seen in the photo above–with crisp and easy to read text and icons. Hit up the link below for more information and the project’s source code. How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• Changing read-write permissions on my external Seagate hard drive

  - by Anthony_JKenn

  I have an external hard drive (Seagate Free Agent) that I normally download files to. I have a dual boot Ubuntu 11.10 along with Windows 7-64 bit. I can read all of my files in my external HD perfectly, but when I attempt to do a download of a file to this drive, I get an "unable to write because of read only" disk error. When I attempt to change the permissions of the disk through the "Properties" bar, I still get an error that I don't have the proper permissions to change permissions. I have heard of "mounting" the disk, but I am afraid of mistakenly reformatting and destroying all the data that I have currently on that drive. How best should I safely change the permissions on that drive so that I can write and download files to the drive?? The drive is listed under /dev/sdc1.

  Read the article

• xubutnu Nvidia Settings not remembered

  - by hozza

  I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Compiz features stopped working when an external monitor is attached

  - by adjfac

  Running 12.04 on a thinkpad T520 with nVidia NVIDIA Quadro NVS 4200M graphics. Just updated to the lasted nvidia 310 driver. Everything works great. However, as soon as I attached an external monitor using nvidia twinview, compiz features such as scale (moves all the active windows in one page) stopped working, as well as alt-tab to list all opened programs. Any ideas how i can fix this? never had this problem with 11.04. I can post my xorg.conf if that's of use to you. Thanks much! edit 1: I am using gnome3 classic edit 2: alt-tab works -- compiz application switcher (by default for gnome3 / unity) will crash gnome-classic, by changing to "static application switcher" in compiz seemed to solve the problem, but the scale still does not work when an external monitor is attached.

  Read the article

• Recommended display/background brightness ratio and UI color schemes [duplicate]

  - by user1306322

  This question already has an answer here: Colour scheme for editor - guidelines or medical reccomendations 3 answers I'm a professional programmer, which means I spend a lot of time staring at various displays. Recently I've been having some problems with my eyes, so I went to talk to several doctors, which all gave me different recommendations as to how bright the background of the room should be in comparison to the display's brightness. It was very confusing, as some of them even agreed with counter-arguments of others, which made it all even less clear. So I'd like to ask the professional programmers, as people who actually have some experience with that. Some of the doctors said that looking at a monitor is like looking at a book, so the brightness ratios should be approximately the same. Others said that background should be as bright as the display itself, because then there is no brightness difference at the edges, and that's what may cause eye fatigue. From my own experience, I can say that reading a book isn't the same as writing or debugging a program, where you have to pay close attention to each symbol, and in books most words are easily recognizable without focusing too hard on them. Also, books are black on white and I myself use the default (dark text, white bg) color scheme for my IDE, but I've seen some programmers use mid-bright text on very dark background color schemes. So I'd like to ask what are the recommended display/background brightness ratios for programming? I'm not sure this site is the right one for this kind of questions, so if you know a better one, please comment.

  Read the article

• External hdd boot entries added to GRUB after upgrade to 13.10

  - by Jason

  Long story short, I was using my laptop's internal HDD as an external one on my desktop, and I forgot to remove it when I was upgrading to 13.10. Now GRUB on my desktop has added entries for the Windows and Ubuntu partitions that exist on the laptop's HDD, but I don't want them to be there. Can I safely remove them ? My GRUB table looks like this if I recall correctly: Ubuntu Advanced Options (or something like this) Memtest Another Memtest Entry Windows 7 (loader) on /dev/sda1 Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 Where Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 are the entries from the external/laptop's HDD.

  Read the article

• Slow tranfer to external USB3 hard drive

  - by JMP

  Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to tranfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive tranferring this amount in windows. But don't have that option at the moment.

  Read the article

• External Storage: The Apricorn Aegis Padlock Review

  Mix hardware encryption and a numeric keypad with a portable USB external hard drive and you get secure business files wherever you roam.

  Read the article

• Domain resolution - local first then external

  - by stefgosselin

  I would like to know how I can configure my dns settings so that domain is resolved locally first, then if not resolved it goes to external DNS. I had this working before, I am using Ubuntu through a VM and need the local domain to resolve first but since I have upgraded I had to reconfigure network and now it works only external, local host file does not seem to even be used. Is there an easy way to check this out? I did slap it up in google but no specific answer seemed to match my case and I too tight on delivery deadline to test-and-try different approaches. You guys rock, thanks.

  Read the article

• "drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]" during install

  - by Warez J. Coxtrong

  I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive. When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine. But as soon as I'm done with all that the next screen goes black and displays this message: drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6] Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly? I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap. I have checked the MD5sum of install image file and it all matches up. d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso

  Read the article

• External device/USB support in android API level 10 [migrated]

  - by chandan

  I am an android UI developer and having problem with issue with USB and external storage device support on android. What I want to have is on plug-in USB/SD card, the storage items in the devices directly show up on screen. For example the modern Operating systems have this feature that we plug in our device and it just automatically shows the contents of the device on new window. I am implementing my UI on android API level 10 and my device is IMX reference kit which has android 2.3.4 installed. I would be grateful if anyone could give specif suggestion or guideline. I already tried with external_storage.java class. but it only says that the APK is installed successfully. But no action launches on plug-in external device.

  Read the article

• "Bootmgr is missing...." Upon reboot [closed]

  - by Gabe

  Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

  Read the article

• How do I connect Ubuntu to Sony Bravia LED TV via HDMI?

  - by VedVals

  My laptop connects to 46" Sony Bravia LED TV using HDMI cable in Windows without any problem. However, it just doesn't work with Ubuntu 12.04. It always says No Signal. Problem somewhat persists after upgrading to 13.04. Bravia detects my laptop as a connection now but I am unable to display anything. What drivers/applications should I install to connect via HDMI? Output of sudo lspci -nn : 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev ff) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)

  Read the article

• Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

  - by user287602

  Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >