Search Results

Search found 14122 results on 565 pages for 'cable management'.

Page 321/565 | < Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >

• Setting up D-link AP2100 as a repeater

  - by Mersan

  Hi, I have two D-Link AP2100, one is connected to a switch (with cable). The second one I would like to use as a repeater, using the WiFi connection to the first and not connected to the switch. Does anyone know first if this is possible, and second and most important, how does one do it. I have tested to set the second AP in repeater-mode, and it is connected to the first, I have full strength to the second one, but I'm not receiving any IP från the DHCP-server, so no access out. Any ideas? /Mersan

  Read the article

• How do I replace the screen of a Dell Inspiron 1545?

  - by Ajus10

  I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

  Read the article

• How to get Virtual PC to recognize MIDI devices?

  - by bparker

  Hey all. I have an XP Pro virtual machine running inside Virtual PC 2007. My host machine is x64 Windows 7. I have a MIDI keyboard hooked up to my machine via a Turtle Beach USB to MIDI 1x1 cable. I have installed the driver and software on my host machine and ran a soundcheck, and everything appears to be working fine. Playback is sent to the MIDI device with no problems. However, when I attempt to install the driver and run a soundcheck in my XP virtual machine, the device is not found. Other USB devices (mouse, keyboard, flash drives) work fine in the virtual machine, but not they MIDI keyboard. I'm not sure what steps to take in order to troubleshoot the and get the VM to start recognizing the MIDI keyboard. Any help or suggestions would be greatly appreciated. Thanks.

  Read the article

• Radeon 5850 Why am I not getting 3 monitors up as a choice ??

  - by Jan

  Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

  Read the article

• ApplicationXtender?

  - by jpmartins

  Where can I find free technical documentation on EMC Application EXtender? This is a distributed system for "Storage, Organization, and Management of Business-Critical Information". The IT team where I'm in has on his machines an installation of a server of this product, but I'm having troubles finding knowledge about it. There are Microsoft Windows or Web-based clients. The administration is "easy", but i have no manual or documentation that can help me understand, monitor or fix...

  Read the article

• How to install audio drivers for Acer Revo nettop?

  - by CT

  I have a Acer Revo nettop. I wiped the XP Home install that came on the machine and put XP Pro on. Acer's support website would lead you to believe that this product does not exist. I know it has a NVIDIA ION LE chipset so I headed over to nvidia.com to download drivers. Ive downloaded and installed the Chipset drivers, Graphics Drivers, and HDMI audio drivers. I have no sound. Under Device Manager there is an unknown Audio Device on High Definition Audio Bus. I do not have an HDMI cable to test hdmi audio. I would just like the standard audio mini-jack output to work. Anyone know of the correct driver or a generic driver that would work? Thanks

  Read the article

• Windows 7: Cannot format drive

  - by aximili

  I was using windows XP, and I just installed Windows 7 on another partition. Now I want to format the partition containing Windows XP, but it says "Windows was unable to complete the format". Under disk management, Format is disabled. Screenshot: http://home.exetel.com.au/aximili/tmp/format-disabled.jpg How can I format this partition (D:) and merge it with the current one (C:)? Thanks in advance.

  Read the article

• Mini-DisplayPort to HDMI Adapter Sound Stopped Working

  - by jimdrang

  I have cancelled cable and want to watch the NCAA tournament games on my TV tonight through my 2011 Macbook Pro where I can stream the game in a browser. I have a cheap Mini-DisplayPort to HDMI converter that I have connected to my TV in the past and had no issues with audio or video, the problem is the audio has stopped working since the last time I used it a few months ago and now just keeps playing through the laptop speakers, but the video works fine. Everything with my setup is the same and when I try to force the audio output to the TV in the Audio system settings, my TV is not listed as an output option at all. I have tried various combinations of power cycling, replugging-in both devices and making sure the TV options are set properly to receive audio through HDMI but no luck. Anyone know what the issue could be?

  Read the article

• How can I add Outlook Office to Add or Programs\Set Program Access and Defaults\Custom options?

  - by Greg

  I have recreated a new email user on a Windows SBS 2003 Active Directory via Advanced Management. I need to enable Outlook Office access on the user's PC but Microsoft Outlook Office does not show in the Add Programs\Set Program Access\Custom section. There are tools that allow you to hide the icon for Set program access but I need to add content, specifically Outlook Office. Outlook Express is enabled but I don't need it.

  Read the article

• HP Proliant Servers - WMI query for system health

  - by Mike McClelland

  Hi, I want to query lots of HP servers to determine their overall health. I don't want to use any packages, or even SNMP - I want to query the server health from WMI and understand if a box is Green/Amber/Red - just like the HP Management Home Page. This MUST be possible - but I can't find any documentation... Oh yes, and the servers are running Windows Server 2003/8. Help!! Mike

  Read the article

• Ubuntu web site hosting & free ,tk domain

  - by user5819

  Hello, I am sort of new to web hosting so sorry if I ask bad questions. I have a pc that runs ubuntu I instaled apache and now I host a web site, but I need a domain name so I found out .tk is free. The site works when typing 192.168.1.x in the browser(x= a number) but in dot.tk when I register in ip it whats one that look like 79.117.x.x so thats where I get stuck, I think I managed to make my ip address static but it still looks like 192.168.1.x and I can't put that in because it says: " This IP address is not valid". Why must it have the ip address that looks like 79.117.x.x and won't work with the internal static one and how can I do to host my site with a .tk domain name ? PS: I'm using a cisco router that's connected with computer via a cable.

  Read the article

• How do you manage private queue permissions on a windows server 2008 cluster?

  - by David

  On windows server 2003 there was an option to allow a resource to interact with the desktop, this allowed you to run computer management mmc snap-in on the virtual name of the cluster, allowing you to manage permissions of the private message queues on the cluster. Windows Server 2008 failover clustering has removed that checkbox, so applications can no longer interact with the desktop. My question is then how does one go about managing private queue permissions on the clustered (the virtual name) server?

  Read the article

• Is possible to boot on PXE over a WiFi device?

  - by Diogo Rocha

  As I know it is possible to boot up some bootable images (like Linux, Clonezilla, management applications and others) over a PXE (Preboot Execution Environment) server with an Ethernet device (802.3). Can the same thing be done with an Ethernet WiFi (802.11) device? I tested with my notebook but my BIOS appears to not enable booting from WiFi devices. Is it possible with some specific WiFi cards and/or a specific BIOS?

  Read the article

• Server room kit?

  - by Bill Weiss

  I feel like this is a question I've seen on here before, but some searching didn't do me any good. This looks similar, but I'm looking for stuff I leave there, not what's in my go-bag. What would you say is indispensable equipment in your server room? I've inherited one that's a bit light on stuff (except for servers, those are in there). We're in the single digits of racks, if that matters. I'm thinking of things like: Cable labeler Ethernet tester (copper at least, fibre if you need) ... ? Community wiki, because, really. [Edit] I suppose it's important to say that it's a colo facility, kind of far from the office. No food, water, etc. :(

  Read the article

• Booting from e-sata drive

  - by petersohn

  I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

  Read the article

• MacBook makes a noise from the MagSafe connection every time I flip a widget...

  - by Timmy

  OK this is bizarre. But basically, what happens is on my MacBook (latest model) whenever I 'flip' a Dashboard Widget I hear a little noise for the duration of the flip: like a tiny continuous squeak noise. It's quite strange. However, it only ever happens when the MagSafe cable is plugged in. WHY?! :'( The noise appears to me emitted from the MagSafe area itself, but, there's not any other CoreAnimation or Quartzey bits that cause this to happen, it only happens with Dashboard widgets... The noise is very quiet and you can only hear it in a silent room. Edit: Running the latest Snow Leopard.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Can XenServer be administered remotely?

  - by edude05

  I keep reading conflicting reports regarding Xencenters' management capabilities. Is it true that you have to be on the same subnet to connect to Xenserver via XenCenter?

  Read the article

• Cisco ASA 5505 and slow download speeds for Apple devices

  - by James

  For traffic routing through my ASA 5505, downloads for all Apple devices, including AppleTV iPad gen 1 IMac MacBook Pro are very slow. speedof.me show less than 1 Mbps download (where I should have 20 Mbps +), yet for any Windows-based device, the download speeds are in excess of 20 Mbps. The Windows device, including the iMac and MacBook Pro machines, are connected via ethernet cable. Why are Apple devices experiencing such pain? Is it an ASA setting, or something else? Thanks.

  Read the article

• Email Problem - Windows Server 2008 R2

  - by Armen Khachatryan

  Hello, Windows Server 2008 , Server Manager- File Services-Share and Storage Management-File Server Resource Manager Right click - Configure options- Email Notifications tab I have already configured what I need but when I write for example smpt.google.com in the log it writes UNABLE TO CONNECT TO THE REMOTE SERVER I have been through this article http://support.microsoft.com/kb/947057 Please help me.. maybe this is a firewall problem?

  Read the article

• Is it safe to use Email service that provided from webhosting for business use?

  - by Kronass

  I work in a company who uses their web-hosting as their email provider, they use it for normal send, receive and basic contacts management, they use it in customers support, sales and marketing, I would prefer to use a dedicated or professional email hosting instead for this type of work. So for business use is it safe to use the email hosting that is included with hosting package or go with a professional email provider?

  Read the article

• vnc connection from linux to windows ce

  - by JosiP

  Im having troubles while im trying to connect from linux to Windows CE, via VNC viewer. Here is what i can see on log: /usr/bin/vncviewer 10.1.1.57 VNC Viewer Free Edition 4.1.2 for X - built Apr 20 2011 12:04:25 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Tue Jul 2 12:15:04 2013 CConn: connected to host 10.1.1.57 port 5900 CConnection: Server supports RFB protocol version 3.5 CConnection: Using RFB protocol version 3.3 TXImage: Using default colormap and visual, TrueColor, depth 24. CConn: Using pixel format depth 6 (8bpp) rgb222 CConn: Using ZRLE encoding I cannot see anything - only black screen. Restarting device does not help. Device is connected directly to machine by crossed ethernet cable, and its IP is assigned by DHCP. Any clues, ideas, what can i do to get normal view ? best regards J.

  Read the article

• Software to measure power draw of HP Server

  - by tombull89

  I'm after some software to measure the power draw of a HP Server, namely a DL360 series. I know Nagios is used for logging and monitering but I'm not sure if it logs power usage as well. I've also tried to find the HP Server Management package but am not sure if this shows power usage either. I'm thinking my best bet would to buy some sort of device that goes inbetween the wall and the servers plug. Can anybody suggest what would do for me?

  Read the article

• SOHO NETGEAR wireless router disconnects when downloading torrents

  - by Lirik

  I have a NETGEAR WGT624 wireless router at home which dies when there is a heavy torrent load. I open up my torrent client and it downloads for about 5 to 10 minutes and it continues to increase the number of seeds (goes up to 70-80 seeds), but after that the router simply fails and I have to restart it in order to get an internet connection again. When I connect directly via an ethernet cable the router and open up the torrent client, then it seems to be doing fine, but when I go wireless then the router stops working properly (although all the lights are still blinking as normal). Is there any way that I can fix this? New router firmware? Change some router options? Feed it a cookie? Anything?

  Read the article

• How to extend Wi-Fi signal across rooms?

  - by Sriram Krishnan

  I moved into a new place and my old Wi-Fi router just doesn't have the range to get into all the rooms. I've been investigating a lot of options and I'm wondering what other folks have done here. Moving the current location of my primary Wi-Fi router is not an option thanks to our cable provider and our landlord. Buy a bigger, beefier router (seems expensive). If so, should I go for one of those draft 802.11n ones to avoid microwave/other Wi-Fi router interference? Set up a router with DD-WRT as a repeater Leech the neighbors' open Wi-Fi access point. Alright, I was kidding about the last one but I'm genuinely curious as to what my best option is.

  Read the article

< Previous Page | 317 318 319 320 321 322 323 324 325 326 327 328  | Next Page >