Search Results

Search found 12484 results on 500 pages for 'host'.

Page 322/500 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• IPP Printing from Windows 7 Ultimate

  - by Casey

  I have network IPP working on Ubuntu and Windows XP. On my Windows 7 instance, it refuses to acknowledge the remote server connection. Can anyone suggest how to configure this correctly? My install steps are: Add Printer Add a Local Printer Create a New Port and "Standard TCP/IP Port" Enter hostname http://host:631/printers/Printer_Name After that it says the printer is not detected, asks me to pick a driver, and finish up. Trying to use the device does not produce any output? If anyone has got this work, I would really appreciate a fix.

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

• htaccess not found

  - by clarkk

  I have installed a Apache 2 (from webmin) server on Debian 6.. I have setup a virtual host db.domain.com on the server which works fine, but .htaccess doesn't work if you get access from the ip address and the directory is listed if no index.php is found? db.domain.com -> 403 forbidden xxx.xxx.xxx.xxx -> gets access to the server Why is .htaccess omitted when you get access from the servers ip address? httpd.conf <Directory *> Options -Indexes FollowSymLinks </Directory> <VirtualHost *:80> ServerName db.domain.com DocumentRoot /var/www </VirtualHost> htaccess order deny,allow deny from all

  Read the article

• Stream tar.gz file from FTP server

  - by linker

  Here is the situation: I have a tar.gz file on a FTP server which can contain an arbitrary number of files. Now what I'm trying to accomplish is have this file streamed and uploaded to HDFS through a Hadoop job. The fact that it's Hadoop is not important, in the end what I need to do is write some shell script that would take this file form ftp with wget and write the output to a stream. The reason why I really need to use streams is that there will be a large number of these files, and each file will be huge. It's fairly easy to do if I have a gzipped file and I'm doing something like this: wget -O - "ftp://${user}:${pass}@${host}/$file" | zcat But I'm not even sure if this is possible for a tar.gz file, especially since there are mutliple files in the archive. I'm a bit confused on what direction to take for this, any help would be greatly appreciated.

  Read the article

• Access server bound to localhost:5000 from different computer

  - by Jesse

  I am working on a web application using the Pylons framework. The web server is binding to localhost:5000 so I am able to access my application by going to localhost:5000 in my browser. I would like to be able to access the server from another computer on the same network. The computer that is hosting the server and application is running Mac OSX and the computer I would like to be able to access the application is running Windows 7 (I have cygwin with SSH installed as well as PuTTY). I could work around this by binding to the host name of the computer but would rather leave it running only on localhost. I was thinking I could do something with SSH tunneling but have not had any luck so far. Any ideas?

  Read the article

• Offer me an ASP.NET & a SQL Server 2008 server specifications for about 2000 concurrent users, please.

  - by amkh

  We have a web application project wich will be created using ASP.NET 4.0, Entity Framework, and SQL Sever 2008 R2. To meet the needs, suppose a normal page of this application that has a query which it takes 10 miliseconds to response on a Core2 Quad @ 2.8GHz proccessor with 2x2GB of DDR3 Ram (EntityFramework overheads are considered). And we will have about 2000 concurrent user at peek times. So, what is the best recommended specifications (CPU/RAM/RAID/...) for the server which will be host this application? -- Or -- How can I calculate that?

  Read the article

• Gnome+NX clipboard behavior; auto-copy on select?

  - by threecheeseopera

  I am having issues with the Gnome(/Linux/Debian+Ubuntu) clipboard when connected remotely; it's default behavior appears to be to automatically add text to a clipboard buffer when that text is selected. This is not usually a problem, until I need to log into one of these systems remotely (w/ GUI), and attempt to use a shared clipboard. If I 'copy' text on the local machine (destined to replace some text on the remote machine), that copy buffer is overwritten as soon as I select the text on the remote machine to be replaced. Is there some way around this? It sort of drives me nuts. Thanks! UPDATE: This is really an NX server issue; X11 supports multiple clipboards ("selections": clipboard, primary. secondary; see this excellent article) that behave differently, and it appears that my problem is related to how NX server translates this over to the host machine.

  Read the article

• gitosis public key

  - by mbursill

  On my client I am attempting to run: git clone gitosis@DevServer:gitosis-admin.git I get a warning: The authenticity of host '10.1.1.13 (10.1.1.13)' can't be established. RSA key fingerprint is a2:c3:fd:d7:f7:75:df:dd:49:64:ce:64:cc:98:e6:2c. Are you sure you want to continue connecting (yes/no)? It appears to be picking up the public key from: /etc/ssh/ssh_host_rsa_key.pub I want it to use the key located in: /srv/gitosis/.ssh/authorized_keys How do I get my server to hand out the correct public key?

  Read the article

• Long domain lookup on .dev domain inside vmware

  - by skelle

  I'm developing on my macbook and normally I have a local running webserver which just works finde. Now I have to use a vmware image where the webserver is running. I set up everything and my dev site is running under site.dev inside vmware. I can connect to the webserver but EVERY request takes a very long time. I already red that this is related with iIPv6 and the way OSX handles /etc/hosts. There I added 192.168.155.42 site.dev and I already did this (Resolving to virtual host very slow on Mac OS X Lion) but my lookup still takes ~30seconds on every request. What can I do to fix this issue?

  Read the article

• DNS for route between WAN & LAN

  - by David Maitland

  I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

  Read the article

• Server 2012 file server security - File access through software only?

  - by user1607914

  I have just setup a server 2012 essentials R2 box as a test bed for my small business. Its running Essentials R2 as a VM on a Essentials R2 host. I have set it up to be the DC and DHCP server and joined a client. My next task is to use it as a file server but I am not quite sure how to set it up. All the client interactions with the file server will be through client side software. I therefore do not want any access to the files apart from through the software. I have looked at the ntfs permissions and there is a permission called "List Folder/Read Data" however I am unsure this will do what I want. Is it possible to give access to the files but not allow access through the windows explorer / command line?

  Read the article

• Seeing double-cursor in 'recursive RDP'

  - by John

  I'm using a Virtual PC VM on my PC to connect to a remote PC using RDP over a VPN. It works just fine except that in the RDP session, I often see a double mouse cursor... I get a standard mouse-arrow and the context-specific cursor such as a caret or hourglass. It's not a big problem but rather annoying and I wondered if there's any way to fix it, or at least understand where it comes from? Is it because I'm effectively running one RDP session from inside another? My host PC runs W7, my local VM runs XP, and the remote PC access using RDP is W7. Thankyou for any help.

  Read the article

• How to make all of my IPs works in HyperVM XEN?

  - by user758667

  I've installed HyperVM on CentOS 5.8 final to make XEN VPS. I have 5 IPs, and added them to an IPPool. They are from *.123 to *.126. But when I add Virtual machines, just the first one (which indicate to *.123 ip) works well. I mean I can ssh to it by "works well" and when I want ssh to the other ones ( *.124 *.125 ...) it says : ssh: connect to host *.124 port 22: Connection timed out after a while. I alos set gateway and netmask as it shows in my server IPAdresses for device eth0 (it doesn't make any difference if I set these or not, I get same error). What should I do now? Thanks.

  Read the article

• Set up a "relay" service

  - by trikks

  Hi! I'm trying to create a 'left client' server < 'right client' setup but need some advice and tips. Let's say that I have a server-daemon on the left side, like a vnc-server that connects to the middle server. On the right side I've got a client that want to connect to the left server-daemon, but it has to be done through the middle server. I assume this should be done with some tunneling service. The server environment is a fully featured Debian Linux or Mac OS X Server host. Any idéas? Thanks / Trikks

  Read the article

• Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

  - by iyl

  I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

  Read the article

• Suhosin per-URL exceptions?

  - by STATUS_ACCESS_DENIED

  I am using SimpleID as my OpenID provider and it turns out that if I log on via pages like those on StackExchange, one of the parameters of the GET request gets dropped by Suhosin. The name of the variable is s and I presume it's responsible for the "return to URL" part after login. All of this is not a problem as long as I am already logged into SimpleID from before. However, as soon as the site on which I want to log in via OpenID ends up at the login screen of SimpleID, the redirect back to the site I came from does not work anymore due to the dropped variable. Is there a method to configure either on a per-virtual-host or per-URL basis to ignore the maximum length for GET requests with a parameter s exceeding the (globally) set limit? I'm using Apache 2.2, so I was wondering whether a mechanism similar to setting the PHP ini variables from within the server configuration exists for Suhosin.

  Read the article

• Using remote station as original

  - by Neka

  I have 2 computers with totally same Debian, config, apps and other stuff. One at work and another at home. It's inconvenient to maintain the same configuration on these stations - upgrading OS, sync configuration, etc. Is there the way to use my home station as "host", and such a "terminal" at work? As if i have one HDD on 2 computers, but must use they own resources like an videocard and another. Looks like i need some remote tool as VNC, but this is no sessional event, I need to use "terminal" comp like original all of the time.

  Read the article

• VirtualBox VRDP server doesn't start on Windows

  - by quanticle

  I've installed VirtualBox 4.1.8 on a Windows 7 Ultimate host system. I've set up an Arch Linux VM that starts just fine from the VirtualBox GUI. However, when I try to start it with VBoxHeadless --startvm <vm_name> it prints the following Oracle VM VirtualBox Headless Interface 4.1.6 (C) 2008-2011 Oracle Corporation All rights reserved. and then it just sits there. I never get the VRDE server is listening on port 3389 message like when I start a headless VM on a Linux machine. Do I have to configure anything else in order to get the VRDE server to run?

  Read the article

• 2 Nics - Same Subnet..Route backup traffic through one of them

  - by Matthewhall58

  I have a windows server and a centos linux server. I want the nightly backup file (targz) that copies to the windows machine to use a different nic so that the main nic is not burdenend with moving the large file. Each server has 2 Nics in it. the network is 10.173.10.0 mask 255.255.255.192 Centos Linux Box: Eth0 is configured with 10.173.10.80 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is configured with 10.173.10.71 mask 255.255.255.192 gw 10.173.10.65 Windows Box Eth 0 is 10.173.10.72 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is 10.173.10.70 mask 255.255.255.192 gw 10.173.10.65 I can ping each machine from each machine. On the linux machine I use the command route add -host 10.173.10.70 dev eth1 but then when i ping 10.173.10.70 it is unreachable..... WHY?

  Read the article

• Problem with the hosts file under windows 7

  - by martani_net

  I updated some entries in the hosts file "C:\WINDOWS\System32\drivers\etc" to make google for example point to 127.0.0.1 # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host 127.0.0.1 localhost ::1 localhost 127.0.0.1 google.com This works fine under windows Vista, but not under Widows 7. When I type google, it goes directly to Google's website. For info, I am not using a proxy server. I think there are some temporary DNS settings that must be flushed, but I don't know how, anyone knows how to fix this? Thank you.

  Read the article

• Should the hostname of my VPS point to the dedi IP of my Domain or to to a shared one used for new account creation?

  - by thomas

  I leased a VPS which I want to use to sell shared hosting. 3 IPs - I call them A, B and C here for simplicity. Actual setup is: A=NS1.mydomain.com; host.mydomain.com and is used to set-up new accounts in shared environment B=NS2.mydomain.com C=dedicated IP for mydomain.com (SSL secured) The more I read about DNS, the more I get confused; thus my question: Is this configuration "Good Practice", especially the hostname pointing to A rather than to C? And what would be a better alternative?

  Read the article

• How much does SQL Server Web Edition cost? + other related questions

  - by Goma

  Hello. I visited Microsoft pricing page about SQL Server databases, but it was not that clear for me. I want to know the exact cost of SQL Server Web Edition. Furthermore, I would like to know how can I get it if I am with VPS hosting? Should I install it by myself or will they install it for me? And finally, is there a web host that provide SQL Server Web edition so I pay for them directly with the hosting package?

  Read the article

• Postfix cleanup daemon access control

  - by Flimzy

  Is there any way to control which hosts are permitted to connect to the cleanup daemon over TCP? Our 'master.cf' contains: 2526 inet n - - - 0 cleanup This is necessary because we have a cluster of SMTP servers running custom code, and they can all inject mail to the centralized postfix server via the cleanup daemon. However, we want to allow only our authorized servers to connect to the cleanup daemon. The current configuration allows any host to connect to port 2526. Clearly we can use iptables to restrict access, but is there a way to do this within postfix itself?

  Read the article

• How to restrict access to the files outside document root in apache?

  - by Bakhtiyor

  I have virtual hosts in /var/www/site1 and /var/www/site2 folders. I want to restrict access to the files outside document root in apache virtual host, i.e. site1 could not access files of site2. Right now this scripts in /var/www/site1 works fine, which is not good: $filename = "/var/www/site2/somefile"; $handle = fopen($filename, "r"); $contents = fread($handle, filesize($filename)); echo $contents; How to solve this problem please? Thank you very much!

  Read the article

• VMware Workstation 7 build 203739 - Capture Movie Mouse Pointer Not Visible

  - by BMIVM

  Hi, I have noticed that whenever I create a Capture Movie, the movie is fine but the mouse pointer is not visible at all. The clicks are on buttons file menus are executed but is hard for a viewer of the capturre movie session to follow the recording smoothly. This was not a problem in previous versions of WorkStation. Is this a bug or is there a setting I can set to see the mouse pointer? Note: VM Tools are installed, Host is Vista Ultimate Edtion SP1, x64 and the guest is a Win XP SP2. Thanks in advance for your help.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >