Search Results

Search found 34495 results on 1380 pages for 'network and internet'.

Page 322/1380 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• How to install a desktop environment onto Ubuntu Server -- but without internet access or a CDROM?

  - by James

  I am playing around with a computer which has no CDROM drive or internet access and I have installed Ubuntu Server onto it. I have that all up and running nicely but now I'd like to install Xfce, GNOME or something similar so I can load up a desktop environment from the command line if I wish. Obviously with internet access or a CDROM, this would be a simple task of using apt-get and it finding & retrieving the packages for me, I assume, but I do not have either. I do however have a USB drive and I have used Unetbootin to make it into a bootable drive with the Ubuntu Server disk image files on there. I have mounted the USB drive to /media/usb0 and tried the command "sudo apt-cdrom add -d /media/usb0" to get apt to recognise the USb drive as an "Ubuntu CD" -- a source of package files but apt-get doesn't seem to be finding Xfce.. I try "sudo apt-get install xfce" and "sudo apt-get install xfce4" but neither find the package.. I would prefer to have Xfce but GNOME would be OK too.. My question is, am I doing something wrong? I figured that the Ubuntu Server disk (or rather, my Ubuntu Server USB drive) might not have any desktop environment packages on there so I tried the Xubuntu Desktop disk too (again, from my USB drive). I tried "sudo apt-get install xubuntu-desktop" but it couldn't find the package - even though it is listed under the /casper/ directory in some MANIFEST file. Anyone see where I'm going wrong? Maybe apt-get install is looking somewhere other than my USB drive? Maybe my commands are wrong? Maybe the disks don't even have the desktop environments on!? Thanks in advance guys, any input would be much appreciated. Cheers - James

  Read the article

• Unable to access the WCF service over VPN!

  - by kurozakura

  Heres the scenario, im on a network A, and i use a vpn client to connect network B to access the webservice which can be accessed in network B.Even though im connect to network B , im unable to access the webservice link.Do i need to configure any settings. But if u r originally in network B and even though if u have connected to network A using vpn client, im able to access the webservice link. But the other way isnt working.

  Read the article

• Why does my Intel Tolapai network chip not transmit packets?

  - by Hanno Fietz

  I'm trying to deploy an embedded system (NISE 110 by Nexcom) based on the Intel EP80579 (Tolapai) chip. Tolapai apparently integrates controllers for Ethernet etc. on a single chip (Intel homepage). The machine can't get a network connection. Diagnosis as far as I could manage: Drivers drivers from Intel compiled and installed without problems (version 1.0.3-144). Kernel version and Linux distribution (CentOS 5.2, 2.6.18) match the driver's installation instructions. drivers are loaded and show up in lsmod (module names are gcu and iegbe) interfaces eth0 and eth1 show up in ifconfig ifconfig I can bring up the interfaces with fixed IP pinging the interface locally works ifconfig shows flag UP but not RUNNING Link ethtool shows "Link detected: no", "Speed: unknown (65536)" and "Duplex: unknown (255)" Link LED is on on the other side of the cable, ethtool shows "Link detected: yes" and reports a speed of 1000 Mbps, which has allegedly been auto-neogotiated with the problematic device. Network traffic analysis the device does not reply on ARP, ICMP echo or anything else (iptables is down) when trying to send ICMP or DHCP requests, they never reach the other end activity LED is off on the device, on at the other end. I tried the following without any effect: Different cables (2 straight, one crossed), I get the link LED lit up on each. Three different devices on the other end (one PC, one netbook, one router) Fixed ARP table entries on both sides Connecting both network ports of the machine with each other, won't ping through the cable, but will ping locally. Tried straight and crossed cables for that.

  Read the article

• How to force Empathy Internet Messaging to change default webcam?

  - by user43430

  I just recently bought a new webcam. It is USB powered. For personal reasons, I wish to not use the built in webcam that came with my netbook. I want to use this new one. I love empathy, it is a great chat client. But, I can't seem to switch my default webcam in empathy from the built in webcam, to the one I just bought. So, is there a way to force empathy to use the USB powered webcam, rather than the built in webcam?

  Read the article

• How to divide work to a network of computers?

  - by Morpork

  Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

  Read the article

• Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

  - by jensendarren

  I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

  Read the article

• How to delete all your old website data from the internet?

  - by Akky Awesøme

  I had my website on rohbits.com but for some reasons I had to delete it and recreate it with this URL wwww.rohbits.com/blog. My problem is that the old links are still visible on google search and when people click on those links, they land on a 404 Error page of the hosting company. I want to either delete all the previous data from the search engines or have an 404 Error page of my own so that I can tell my visitors where the actual website is. I have already redirected all the traffic which comes to rohbits.com to www.rohbits.com/blog but when they click on the expired links, they get this error page. One sample expired link is this one: http://rohbits.com/wordpress-tricks.

  Read the article

• Strange issue ! Local network cache of PHP and Apache2 on Win Server 2008 R2

  - by Ahmed Benlahsen

  Software configuration : I have a new Server with windows server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separated packages. Issue : On my first installation of my application all works great. When I updated some JS and CSS files then I access to my application again from a PC on local network I get the old JS and CSS versions! But when I access to the same application on local server I got the latest versions of those files! Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I never had this kind of issue! I think that there are some cache but I don't know where! Maybe on Win Server 2008 R2 or on VMWare ! The question is : Why when I access to my application on the server all works fine, but when I access to the same application from a local network I have the old version of JS and CSS files?? Any one can help me please?! Regards.

  Read the article

• How can I install .NET framework 3.5 on XP machines without internet connection?

  - by EricSchaefer

  I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

  Read the article

• sbs-server with 2 nics and 2 connections to the internet with different providers not working as it

  - by erik-van-gorp

  We have the following configuration : A sbs-2003 server in a domain (mydomain.com) with 2 network cards, each connected to a different network (provider), with different gateways, one for web and one for mail and clients. (we do this because the bandwitdh we get from our providers is too small to handle all the mail(+spam) traffic and webservices, so we took 2 providers) DNS is as follows : www.mydomain.com 1.2.3.4 mail.mydomain.com 5.6.7.8 NIC 1(192.168.1.3) is connected to to the internet through a firewall at 192.168.1.1, having wan address 1.2.3.4 NIC 2(10.0.0.3) is connected to to the internet through a firewall at 10.0.0.1, having wan address 5.6.7.8 Both nics have their default gateway installed at their corresponding routers. Also the metrics are set equal. (i know this isn't a supported config, but it works more or less). In this configuration i can use RDP on both wan adresses, and telnet to port 25 works as well on both. The issue now is that since a few weeks , we get regular disconnections, and website hickups(timeouts), several per hour. If we set one router to a higher metric, that route no longer works. In short, I want the mails to route through NIC2 and the web through NIC1. Any better configuration (without installing a second mail server) ?

  Read the article

• Can only bring up one of two interfaces

  - by mstaessen

  I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

  Read the article

• How can I change the binding order of network adapters in Windows 7?

  - by Chris Farmer

  The end goal here is that I am trying to install an Oracle 10g server on my Windows 7 x64 dev box. I use DHCP, and the Oracle installer is throwing up this warning: Checking Network Configuration requirements ... Check complete. The overall result of this check is: Failed <<<< Problem: The install has detected that the primary IP address of the system is DHCP-assigned. Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP. I have installed the loopback adapter, but I am not sure how to make it the primary network adapter. I see this Microsoft KB article on the subject but it's Windows XP-oriented, and I can't seem to find a comparable one for Windows 7. Some of the options it talks about don't seem to be present in the views of the adapters that I see. So, how can I make the loopback adapter become the primary adapter?

  Read the article

• Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

  - by Jamie G

  I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

  Read the article

• Virtualbox Networking: XP Guest, Ubuntu Host: Connecting to Windows servers & local network?

  - by user51833

  Here's what I have: Windows XP running in VirtualBox 3.0.8_OSE r53138; Host OS = Ubuntu 9.10 "Karmic Koala"; Windows network in my office with smb fileservers; Guest OS is connected to the internet and is sharing folders with Host OS; Limited networking expertise. Here's what I actually need to do: Use MS Outlook in my XP guest with all its calendar-sharing features and stuff (if this is all done through the internet then great) - or find a Linux app that can do the same stuff; Map Windows network servers, eg. smb://server01/ in my XP guest (I can already access these in Ubuntu. Here's what I've tried with no luck: Entering the server address (example above) in my XP guest windows explorer address bar (got a "could not access the file, path or drive" error message - maybe if I could enter login/pass information? But I don't know how); Mapping the server as a network drive (Windows could not find the path); Mounting the server as one of my shared folders (I couldn't find it through the shared folders browser in VirtualBox - is there somewhere in the Linux filesystem that Ubuntu keeps links to mounted servers?).

  Read the article

• How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface? [migrated]

  - by JJarava

  This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

  Read the article

• How do I enable Ubuntu Gnome system tools

  - by RussellW

  I am running Ubuntu 10 with Gnome 2.30.2. This is a VMWare workstation image provided by another company that I do not have support in this regard. I am trying to access the graphical tools for configuring the network, users, and services but the System-Administration menu does not have these options listed. The main issue I am trying to solve is to correct the problems with the gnome menu options and network settings I have the gnome-system-tools package installed, and I am unable to run command-line versions of the tools, such as nm-applet (I get no GUI if I run that command, the process is running in the background). I realize that I can perform many tasks command-line, but I would like to use the GUI for administrative functions as I am not overly proficient for all command for restarting services and setting a static IP with a specific gateway. Further, I can run gnome-nettool, but I cannot change the IP, I can only see my network card. nm-connection-editor does not show any network cards that I can configure to change the IP. Currently, I am getting a DHCP through my NAT in VMWare, I want to set it to a specific IP address though. Preferences Menu (note some missing options) ![Preferences Menu][1] Admin Menu (note some missing options) ![Admin Menu][2] Network Tools (I can view but not change IP address) ![Network Tools][3] Network Settings (Unable to change IP address) ![Network Settings][4] Network Connections (no connections listed, not even my existing ethernet NAT connection through VMWare) ![Network Connections][5] See images here that I have referenced: 1- http://i.imgur.com/kl8pP.png 2- http://i.imgur.com/K3Cjz.png 3- Iq7Xb.png 4- 7wheV.png 5- J2ad8.png

  Read the article

• Why does my computer not always automatically request a new DHCP lease when switching networks?

  - by KingJ

  I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease for the new network. Of course, since each network has different settings any connections will fail when using the old lease. While Windows will eventually request a new DHCP lease, it's often much faster for me to release the old lease and request a new, correct, lease. It puzzles me as to why this is not automatically done when associating to the network? One possible cause is that the laptop is put to sleep while connected to one network, then woken when in range of the other network. Nevertheless, I would expect that the lease would be renewed when the laptop associates to the other network rather than attempting to use the old lease. It should be noted that the two networks are completely different, both in terms of size, number of APs, network settings, SSIDs etc. One network is my home network and the other one is the campus-wide network at my University.

  Read the article

• Why can't a PC with 2 network cards be accessed by hostname?

  - by lewis

  I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• Firefox installed on my ubuntu 12.04 machine but I am unable to connect to the internet(Nobody know???)

  - by Chella

  every other browser installed is working fine..! except this Firefox. what are the things that I need to check, to make firefox work on my computer. I am a newbie for ubuntu. I tried googling not got enough and clear information. Please help me. Thanks in advance..! This is the error that I am getting just before launching of the application..! Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.

  Read the article

• Does NaCl mean the death of Internet Explorer? [closed]

  - by Monika Michael

  From the wikipedia - Google Native Client (NaCl) is a sandboxing technology for running a subset of Intel x86 or ARM native code using software-based fault isolation. It is proposed for safely running native code from a web browser, allowing web-based applications to run at near-native speeds. (Emphasis mine) (Source) Compiled C++ code running in a browser? Are other companies working on a similar offering? What would it mean for the browser landscape?

  Read the article

• Internet Explorer 9 : Microsoft répond aux critiques de Mozilla avec un argumentaire sur ce qu'est un « navigateur moderne »

  IE9 : Microsoft répond aux critiques de Mozilla Avec un argumentaire en 4 points sur ce qu'est un « navigateur moderne » Mise à jour du 17/02/11 Après les critiques de Paul Rouget, développeur français chez Mozilla, qui accusait Microsoft d'avoir « deux ans de retard sur la concurrence » (lire ci-avant), Tim Sneath de Microsoft vient de publier un billet dans lequel il liste ce que, d'après lui, les développeurs et les utilisateurs attendent d'un navigateur dit « moderne ». Et chaque point ressemble fort à un pic contre Firefox. Pour lui, un navigateur moderne est « rapide ». Il permet par ailleurs une «...

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• Does the .biz internet top-level domain deserve to be taken seriously?

  - by CrazyJugglerDrummer

  .com is the most preferable TLD most of the time, so many people choosing domain names have to pick between desiredname.something_else or totallydifferent.com. From wikipedia: The biz TLD was created to relieve some of the demand for domain names in the com top-level domain, and to provide an alternative for businesses whose preferred domain name in com had already been registered by another party. .org at least implies an organization, whereas .com is the most generic 'commercial'. But .biz seems like a total duplicate that doesn't seem in widespread use <pun>and deserves to be closed. </pun>. Does .biz have any advantages over .com? Are .biz domains worth registering if .com is already taken?

  Read the article

• Software Architecture: How to divide work to a network of computers?

  - by Morpork

  Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >