Search Results

Search found 47997 results on 1920 pages for 'super newbie'.

Page 322/1920 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • Acer Aspire One -- strange battery problem, charges only up to ~90%

    - by houbysoft
    I have this strange problem on the acer aspire one d250. It happened already once before, stayed for about two weeks, and then "fixed itself". The problem is as follows: the battery can't seem to get fully charged; ie the indicator is stuck at about 90% (it's probably not a software problem -- I have ArchLinux and Windows 7 installed and both report exactly the same) and it never passes that value, but it still shows the status as "charging" (I tried everything I could think of -- leaving it charging for extremely long amounts of time, doing a few complete charge-recharge cycles, removing/reinserting the battery, cleaning the connectors, even updating the BIOS, etc., and nothing helped). Also, when it is getting charged, it charges pretty fast until about 70% and then progresses extremely slowly. The battery holds the charge that appears on the battery indicator normally. Just can't get the battery to charge fully -- I can't get it past the 90%. At first I thought this would be a simple battery failure (even if the computer is not that old, about 6-7 months), but as I mentioned it happened once before, and then one day it fixed itself. I tried contacting Acer about this, but the support was not helpful, completely stupid, it seemed like they used canned responses, the usual. Any thoughts on how to fix this?

    Read the article

  • File association for editing on a mac

    - by Agos
    I'm quite experienced with how file association works for opening files on Mac OS X. I recall reading somewhere that OS X keeps not only the information about which apps can open a file, but also which apps can edit a specific file type. I'm having problems with those applications (Coda, Espresso, Forklift, Flow) that have an “edit with external editor” feature, since issuing this command on HTML files opens them with Dashcode. Dashcode of course is not the current association for opening these files (Safari is), so it's clearly looking for apps that can edit HTML. Since I'd like to use TextMate as my editor in these cases, how can I set this preference?

    Read the article

  • Cliq Wireless questions

    - by Nathan Adams
    Heres the deal: I am by no means a Linux expert, even less when it comes to the Android OS but lets see if we can't solve this problem. The problem I am having is that on the Cliq we have a broadcom chip. In order to use the wireless card you must first insert the module into the kernel. Fine: # insmod /system/lib/dhd.ko insmod /system/lib/dhd.ko # lsmod lsmod dhd 164936 0 - Live 0xbf000000 # BUT netcfg (or ifconfig in busybox) does not recognize that there is a wireless adapter there: # netcfg netcfg lo UP 127.0.0.1 255.0.0.0 0x00000049 dummy0 DOWN 0.0.0.0 0.0.0.0 0x00000082 rmnet0 UP 14.67.164.2 255.255.255.252 0x00001043 rmnet1 DOWN 0.0.0.0 0.0.0.0 0x00001002 rmnet2 DOWN 0.0.0.0 0.0.0.0 0x00001002 usb0 DOWN 0.0.0.0 0.0.0.0 0x00001002 # busybox ifconfig busybox ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:282 errors:0 dropped:0 overruns:0 frame:0 TX packets:282 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18754 (18.3 KiB) TX bytes:18754 (18.3 KiB) rmnet0 Link encap:Ethernet HWaddr EE:83:E8:B4:4A:ED inet addr:14.x.x.x Bcast:14.67.164.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7148 errors:0 dropped:0 overruns:0 frame:0 TX packets:7659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2609236 (2.4 MiB) TX bytes:908575 (887.2 KiB) # For giggles if we attempt to launch wpa_supplicant anyways we get this: # wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf ioctl[SIOCSIWPMKSA]: No such device ioctl[SIOCSIWMODE]: No such device Could not configure driver to use managed mode ioctl[SIOCGIFFLAGS]: No such device Could not set interface 'eth0' UP ioctl[SIOCGIWRANGE]: No such device ioctl[SIOCGIFINDEX]: No such device CTRL-EVENT-STATE-CHANGE id=-1 state=0 ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWAUTH]: No such device WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. ioctl[SIOCSIWAUTH]: No such device WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: No such device WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: No such device ioctl[SIOCGIFFLAGS]: No such device # In dmesg we get: <4>[18300.494065] dhd_oob_enable_intr : enable <4>[18305.019976] dhd_net_start failed bus is not ready <4>[18305.020278] dhdsdio_probe: dhd_net_start failed! Do I need to specify the firmware with insmod? Why are we trying to control the interface manually instead of through the Android API? The Android API doesn't support ad-hoc connections as far as I can tell. The card, I am sure, most certainly can.

    Read the article

  • Laptop wakes from sleep, once, due to audio controller (Windows 7)

    - by stijn
    The laptop is a recent Dell XPS 15z and the problem is as follows (reproducible about 90% of tries): put laptop to sleep using either Start-Sleep or closing the lid laptop goes to sleep after about 5 seconds, but instantly wakes again showing a black screen (touching the keyboard or moving the mouse shows the login screen one normally gets after wake) login again, put laptop to sleep latop stays in sleep mode output of powercfg -lastwake after the first instant wake shows the audio controller is responsible. Why would that be, why only the first try, and how to fix this? Wake History Count - 1 Wake History [0] Wake Source Count - 1 Wake Source [0] Type: Device Instance Path: PCI\VEN_8086&DEV_1C20&SUBSYS_04461028&REV_05\3&11583659&0&D8 Friendly Name: Description: High Definition Audio Controller Manufacturer: Microsoft

    Read the article

  • needing storage integrity (write/read) test - for BASH

    - by Mr. Bash
    In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

    Read the article

  • Bash delete file when variable = x

    - by twigg
    I'm creating a bash script which reboots the system at each reboot it adds a new line to a text file, I then read the text file before each reboot. Once the variable holding the number of lines reaches say 10 I want the script to delete the text file (at which point on the next reboot it will see the file isn't there, brake the loop and promote the user to start again). I tried this: exec < text.txt nol=0 while read line do nol=`expr $nol + 1` done reboot_count=10 if ["$nol" == "$reboot_count"]; then rm text.txt fi but this doesn't seem to be working, all help is appreciated :)

    Read the article

  • Dial PPPoE connection on Windows startup

    - by alex
    Is there a way to automatically dial a PPPoE connection on startup? In Mac OS X, this is done automatically after login. It was also possible in Windows XP: when creating a new connection, it also created a shortcut to it on the desktop. Adding it to the startup folder and setting it to not prompt for credentials solved the problem. But in Vista and Windows 7, there are no shortcuts to the newly created connections, so I can't do the same thing here. Is there any other way to do this?

    Read the article

  • Apps crashing - Android 4.3 in VirtualBox

    - by Nasenbaer
    Performance and stability problem with Android 4.3 in VM. Tried with x64 and x86 System. VirtualBox V4.3.2 in use. Android could be installed on x86 only. But there it seems to be successfully, using the "Linux 2.2" template on VirtualBox. 1024MB RAM and 2GB Harddisk defined. Some times Android browser is crashing and closing. In all cases stuff like "Skype" and "Plats vs Zombies" does never startup after installing. Crashes directly. "Plats vs Zombies 2" is not able to install. Is there any way of gettings such stuff work?

    Read the article

  • Tell VLC where to look for plugins.dat file

    - by puk
    I am trying to build vlc from source (I will include installation script below), but when I try to run vlc I get the following error main libvlc warning: cannot read /home/user/downloads/vlc3/vlc/src/.libs/vlc/plugins/plugins.dat (No such file or directory) Why is it even looking in that non existant directory? The plugins.dat file is in /usr/lib/vlc/plugins/. I tried export VLC_PLUGIN_PATH=/usr/lib/vlc/plugins/ But it still looks in that non existent path. I can create a symbolic link, but that is a terrible way to do it. If in 6 months I delete my downloads folder, all of a sudden my vlc will break. Here is the script I am running to install: ./configure --enable-rpi-omxil --enable-dvbpsi --enable-x264 --enable-xcb --with-x --enable-xvideo --enable-sdl --enable-avcodec --enable-avformat --enable-swscale --enable-mad --enable-a52 --enable-libmpeg2 --enable-dvdnav --enable-faad --enable-vorbis --enable-ogg --enable-theora --enable-mkv --enable-freetype --enable-fribidi --enable-speex --enable-flac --enable-live555 --enable-caca --enable-skins2 --enable-alsa --enable-ncurses --enable-debug --enable-lirc --enable-live555 --enable-shout --enable-taglib --enable-vcdx --enable-realrtsp --enable-svg --enable-dvdread --enable-dc1394 --enable-twolame --enable-dirac --enable-aa --enable-jack --enable-bluray --enable-opencv --enable-sftp --enable-pulse --enable-projectm --enable-vsxu --enable-atmo --enable-glspectrum '--with-extra-libs=/usr/local/lib' '--with-extra-includes=/usr/local/include' '--x-libraries=/usr/local/lib' '--x-includes=/usr/local/include' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' EDIT: I am using the following version: VLC media player 2.2.0-git Weatherwax (revision 2.1.0-git-1168-g5804dd1) And the --plugin-path option is no longer supported.

    Read the article

  • Can the Gimp split an image into multiple images?

    - by Manu
    I've been scanning a lot of photos recently, more than one at a time. I now have multiple jpegs, each containing multiple photos. Can I, using Gimp, "split" a jpg into 3 smaller files ? What I used to do is : copy the jpg 3 times, and crop a different picture in each copy. There must be an easier way to do this ! EDIT : Is there a plugin that can do that ? I've looked around, but only found plugins that "cut" an image into pieces of equal size.

    Read the article

  • Using windowmaker with quartz-wm in proxy mode on Snow Leopard

    - by Graham Lee
    I can modify my .xinitrc file to exec /opt/local/bin/wmaker, and get WindowMaker 0.90.2 as my window manager in X11.app. I'd like to use quartz-wm not as a window manager, but to provide the pasteboard integration with Aqua using the --only-proxy flag (see the man page). If I add the following line to .xinitrc: exec /usr/bin/quartz-wm --only-proxy & then WindowMaker never starts, complaining that there's already a window manager running. Is it possible to get the two to play nicely together, or is proxy feature part of the Xquartz server now? It seems that the Xquartz manpage has a number of pasteboard-to-clipboard synchronisation settings, but it's not clear whether quartz-wm needs to be running for those to work.

    Read the article

  • external hard drive is no longer recognized, gives buffer I/O errors

    - by BioGeek
    Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

    Read the article

  • Flash movie randomly freeze the browser

    - by Erick
    Just recently it seems that my flash player have had some troubles to display flash videos (youtube/dailymotions and others like this). This issue was supposed to be fixed with Flash Player 10 beta if I remember correctly. My flash player is currently at the lastest version available (10.0.45.2) I'm currently on Windows 7 x64. I tried to uninstall it and reboot and reinstall it, didn't work. Sometimes when it freeze and I reboot it "fixes" temporary the problem. The freeze problem is each and every browser. If one fails and freeze, every browsers using the plugin or ActiveX (Opera 10.5/Chrome 5/Safari 4/IE 8/FF 3.7 all installed) will freeze upon playing. I'm quite out of inspirations for fixing this up now I dare say.

    Read the article

  • 802.11N Windows XP Clients Unable to See Each Other

    - by zippy_raggle
    I am attempting to update my wireless network from 802.11g to 802.11n. When connected to the 'G' access point, the client laptops (there are 7 running Windows XP) are able to connect and browse the network for each other. When I connect them to the 'N' access point they can see the access point, but not the rest of the network. I tried swapping out the access point with a wireless router, but this did not change anything. I verified in both the AP and the router that isolation was turned off. Searching the web has not turned up any other ideas. The manuals don't show anything either. Why can't my wireless client nodes see each other on the 'N' network?

    Read the article

  • Windows 8.1 Insufficient storage available to create shadow copy

    - by Bob.at.SBS
    [Note: After I entered the problem statement, I found this question, which is apparently the same problem. Maybe one of us will get a good answer...] I have used the "Windows 7 File Recovery" tool under Windows 8 to create system image backups to an external USB hard drive. I built a new Windows 8.1 machine, and I want to create my first system image backup of that machine to the same USB hard drive. The "Windows 7 File Recovery" tool is gone in Windows 8.1, but wbAdmin is alive and well: wbAdmin start backup -backupTarget:\\?\Volume{2a2b...994f} -allCritical -quiet fails with this text displayed: wbadmin 1.0 - Backup command-line tool (C) Copyright 2013 Microsoft Corporation. All rights reserved. Retrieving volume information... This will back up (EFI System Partition),(C:),Recovery (300.00 MB) to \?\Volume {2a2b1255-3a86-11e3-be86-b8ca3a83994f}. The backup operation to F: is starting. Creating a shadow copy of the volumes specified for backup... Summary of the backup operation: The backup operation stopped before completing. The backup operation stopped before completing. Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x8004231f) Insufficient storage available to create either the shadow copy storage file or other shadow copy data. The EFI System Partition is 100 MB The Recovery Partition is 300 MB The C partition is 1.72 TB, NTFS, 218 GB used, 1.51 TB free The destination drive is 1.81 TB, NTFS, 678 GB used, 1.15 TB free I've fiddled with vssadmin resize shadowstorage, with no change in the error. vssadmin list shadowstorage displays: Shadow Copy Storage association For volume: (C:)\?\Volume{37a0...263}\ Shadow Copy Storage volume: (C:)\?\Volume{37a0...263}\ Used Shadow Copy Storage space: 2.39 GB (0%) Allocated Shadow Copy Storage space: 2.81 GB (0%) Maximum Shadow Copy Storage space: 531 GB (30%) Shadow Copy Storage association For volume: (F:)\?\Volume{2a2...94f}\ Shadow Copy Storage volume: (F:)\?\Volume{2a2...94f}\ Used Shadow Copy Storage space: 334 GB (17%) Allocated Shadow Copy Storage space: 337 GB (18%) Maximum Shadow Copy Storage space: UNBOUNDED (922154758%) (Yeah, the "percent calculation" for UNBOUNDED is seriously bogus.) I've run SFC /verifyonly and it seems happy. I've verified that the new `Volume Shadow Copy" service starts when I start the backup operation. Any suggestions?

    Read the article

  • in Open Office Calc, how do I drag and drop cells to insert rather than replace their destination?

    - by joachim
    I want to rearrange rows with the mouse in Calc. In Excel, I select the whole row, then drag and drop it while holding SHIFT. This causes the drag and drop cursor to turn into a bar rather than cells, and the cells are inserted at the bar's position. Is there a way to accomplish the same sort of thing in Calc without going round the houses inserting columns before the drag operation?

    Read the article

  • Elinks and flash

    - by bajki
    Hello everybody, is there a possibility to "use" flash based objects with elinks ? I mean, i have an online flash based multiplayer game ( http://haxball.appspot.com ) and i want to connect to game with elinks installed on my shell server to create an always-present game room. To do it, i need a terminal-based webbrowser with flash support. There is an elinks installed so it would be great if there is such a possibility in it. Any ideas? Thanks, Mike

    Read the article

  • Regex in Notepad++ 6

    - by Rocket
    So, Notepad++ got updated to v6.0. One of their new features is PCRE (Perl Compatible Regular Expressions). I tried to use this new feature to find and replace things in a file. I tried the regular expression: {\$([a-zA-Z_]*)} and it yelled at me, saying "Invalid regular expression". I tested this regex in other programs (like my main IDE, Geany), and it worked fine. Why does this not work in Notepad++ 6.0?

    Read the article

  • Fix Corrupted Ruby in Mac OS X Lion

    - by luckyb56
    I screwed up my ruby buy executing the command sudo easy_install pip> /usr/bin/ruby -e "$(/usr/bin/curl -fksSL https://raw.github.com/mxcl/homebrew/master/Library/Contributions/install_homebrew.rb)" It showed error: Couldn't find index page for '-e' (maybe misspelled?) No local packages or download links found for -e error: Could not find suitable distribution for Requirement.parse('-e') After that when I tried to install Brew by: /usr/bin/ruby -e "$(/usr/bin/curl -fksSL https://raw.github.com/mxcl/homebrew/master/Library/Contributions/install_homebrew.rb)" It shows error which I have no idea: /usr/bin/ruby: line 1: Searching: command not found /usr/bin/ruby: line 2: Best: command not found /usr/bin/ruby: line 3: Processing: command not found Usage: pip COMMAND [OPTIONS] pip: error: No command by the name pip 1.1 (maybe you meant "pip install 1.1") /usr/bin/ruby: line 5: Installing: command not found /usr/bin/ruby: line 6: Installing: command not found /usr/bin/ruby: line 8: Using: command not found /usr/bin/ruby: line 9: Processing: command not found /usr/bin/ruby: line 10: Finished: command not found /usr/bin/ruby: line 11: Searching: command not found /usr/bin/ruby: line 12: Reading: command not found /usr/bin/ruby: line 13: syntax error near unexpected token `(' /usr/bin/ruby: line 13: `Scanning index of all packages (this may take a while)' Can this be fixed?

    Read the article

  • SFTP only works occasionally

    - by 82din
    I suddenly get this error using SFTP: Status: Connecting to example.com... Response: fzSftp started Command: open "[email protected]" 22 Command: Pass: ********* Status: Connected to example.com Status: Retrieving directory listing... Command: pwd Response: Current directory is: "/root" Command: ls Status: Listing directory /root Error: Connection timed out Error: Failed to retrieve directory listing I tried using FileZila, Cyberduck, Shell (Terminal), same result. However, it worked fine today (just a few seconds) in Passive mode. I guess something changed in my network, so I have tried both: Active and Passive mode: Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.6.0.2 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from http://checkip.dyndns.org:8245/ Checking for correct external IP address IP <external IP> big-bf-ccc-f Response: 200 OK PREP 49565 Response: 200 Using port 49565, data token 380352881 PORT 186,15,222,5,193,157 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed Because I'm working behind a router, I get my external IP from http://checkip.dyndns.org:8245/ I also tested different range of ports.

    Read the article

  • Booting off windows image through network

    - by Mr. Sir King Osman
    I have a HP st5742, which is a tower that does not have a hard drive and I am trying to boot it off the network, preferably off an image. It was designed along with the program HP Image Manager, however this program has been discontinued by HP and I can not seem to find a way to get a copy. If this helps, I am running my network with windows server 2008 R2 and would like the streaming client to be running windows. I have spent days searching for a way to deploy this machine however I can not seem to find a straight forward program, guide, or way to do this. I am new to this sort of thing but I willing to reading into the subject, all I need is a point in the right direction. Any help would be greatly appreciated.

    Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >