Search Results

Search found 12395 results on 496 pages for 'interactive mode'.

Page 324/496 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331 | Next Page >

Wifi doesn't connect if I'm upstairs

- by user11233

Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

Read the article
Wifi interface changes name seemingly at random

- by ray_voelker

I'm currently having some issues getting a wireless interface to work continuously under an install of Ubuntu 12.04.1 LTS. Some of the issues I'm experiencing include Connection will drop out after some time after it has initially worked. Interface will be a different name after a reboot. For example, wlan0 will become wlan4 when using the ifconfig -a command. Ubuntu will take a long time to boot, looking for network adapters. The purpose of this build is to function as a web kiosk in a library. The computer is supposed to boot up into a web browser, and allow for browsing of the catalog. For some reason this interface does not appear to be working as it should. Are there any explanations for some of these problems I'm having, and perhaps some solutions? The wireless card appears as this after doing an lspci ... Ralink corp. RT2561/RT61 802.11g PCI In the /etc/network/interfaces file I have the following configuration for the interface. auto wlan0 iface wlan0 inet dhcp wireless-essid UDwireless wireless-mode Managed Thanks in advance for help on this.

Read the article
More NASM with GVim

- by MarkPearl

Today I am bashing around with nasm again… some useful things I found… Set the current working directory of gvim to the current file path I have found setting the current working directory of gvim to the file location is very useful, especially if you are wanting to use commands in gvim to run your compiled code. It can be done by typing in the following in the command mode in gvim… cd %:p:h Once you have set it, you can use the ! to run commands you would normally run in the dos shell.. e.g. !dir Compiling code to make an executable There are three thing you need to specify to compile a basic file in name, they are… The output file format The output file name The source file name An example of this would be the following (where you have a file called temp.asm which is the source file) nasm –f bin temp.asm –o temp.com Output file format The –f specifies the output file format (in this case a binary file). To get a list of the available output file formats you can type nasm –hf (for my installation bin is the default, in which case I can omit it) Output file name This is just the name you want the compiled file to be called. For windows machines I specify .com as my default format.

Read the article
Oracle HRMS API - Hire Into Job

- by PRajkumar

API - hr_employee_api.hire_into_job Example -- Consider a Contact for some employee already exist in Oracle System. Now that Contact has got Job, so his Person type should be converted to Employee from Contact (External) Following API helps to create assignment for that Contact and helps to change his Person Type DECLARE -- Local Variables -- --------------------- lc_dt_ud_mode VARCHAR2(100) := NULL; ln_person_id NUMBER := 32981; ln_object_number NUMBER := 1; ld_effective_date DATE := TO_DATE('28-JUN-2012'); lc_employee_number VARCHAR2(100) := 'CONTACT_TEST_01'; -- Out Variables for Find Date Track Mode API -- ------------------------------------------------------------ lb_correction BOOLEAN; lb_update BOOLEAN; lb_update_override BOOLEAN; lb_update_change_insert BOOLEAN; -- Out Variables for Hire to Job API -- ------------------------------------------- ld_effective_start_date DATE; ld_effective_end_date DATE; lb_assign_payroll_warning BOOLEAN; lb_orig_hire_warning BOOLEAN; ln_assignment_id NUMBER; BEGIN -- Find Date Track Mode -- ---------------------------- dt_api.find_dt_upd_modes ( -- Input data elements -- --------------------------- p_effective_date => TO_DATE('28-JUN-2012'), p_base_table_name => 'PER_ALL_PEOPLE_F', p_base_key_column => 'PERSON_ID', p_base_key_value => ln_person_id, -- Output data elements -- ----------------------------- p_correction => lb_correction, p_update => lb_update, p_update_override => lb_update_override, p_update_change_insert => lb_update_change_insert ); IF ( lb_update_override = TRUE OR lb_update_change_insert = TRUE ) THEN -- UPDATE_OVERRIDE -- ----------------------------- lc_dt_ud_mode := 'UPDATE_OVERRIDE'; END IF; IF ( lb_correction = TRUE ) THEN -- CORRECTION -- -------------------- lc_dt_ud_mode := 'CORRECTION'; END IF; IF ( lb_update = TRUE ) THEN -- UPDATE -- -------------- lc_dt_ud_mode := 'UPDATE'; END IF; -- Hire into Job API -- ------------------------ hr_employee_api.hire_into_job ( -- Input Data Elements -- ----------------------------- p_effective_date => ld_effective_date, p_person_id => ln_person_id, p_datetrack_update_mode => lc_dt_ud_mode, -- Output Data Elements -- ---------------------------- p_object_version_number => ln_object_number, p_employee_number => lc_employee_number, p_assignment_id => ln_assignment_id, p_effective_start_date => ld_effective_start_date, p_effective_end_date => ld_effective_end_date, p_assign_payroll_warning => lb_assign_payroll_warning, p_orig_hire_warning => lb_orig_hire_warning ); COMMIT; EXCEPTION WHEN OTHERS THEN ROLLBACK; DBMS_OUTPUT.PUT_LINE(SQLERRM); END; / SHOW ERR;

Read the article
Client/Server game even in solo: any big problem?

- by Klaim

I'm making a game which have strong basic design based on multiplayer but also should provide a really interesting and self-sufficient solo game. A bit like a real-time strategy game. The events and actions taken shouldn't be as massive and immediate as in a FPS, so you can also think the networking like for an RTS. It's a PC game, targetting Windows, MacOSX and Linux (Ubuntu & Fedora). It's programmed in C++, using a variety of open source libraries, so I have great (potential) control over the performances. So far I always considered that just making the game work with two applications, client & server, even in solo mode was ok. However, as I'm in the process of starting the network code I'm having doubts about if it's a good idea. I'm not a specialist so I might be missing something in my analysis. I see these pros and cons: Pros: The game works only one way so if I fix a bug it should apply on all game modes, whatever the distance with the server is; Basic networking issues would be detected early, including behaviour with the protection softwares (firewall) installed (i am not specialist so this might be wrong); Cons: I suppose that even if it should be really fast enough, networking client and server on the same computer would still be slower than no networking and message passing in (one) process memory. Maybe debugging would be more difficult? I don't have experience in this case but so far I assume that debugging with Visual Studio allows me to debug multiple process so it shouldn't be really different. Also, remote debugging. My question is: is there a big disadvantage that I missed? Or maybe there are advantages that I missed and that should encourage me to just continue with only client-server game sessions?

Read the article
SSH asks for password

- by user1435470

I have already : Installed the server Generated the pub/pri keys with -P "" Copied the id_rsa.pub to authorized_keys ssh localhost answered "yes", copied to known_hosts tried ssh localhost still asks for password Output: hduser@hduser1-desktop:~$ ssh -v localhost OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/hduser/.ssh/identity type -1 debug1: identity file /home/hduser/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/hduser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian- 3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /home/hduser/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering public key: /home/hduser/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/hduser/.ssh/identity debug1: Trying private key: /home/hduser/.ssh/id_dsa debug1: Next authentication method: password Any suggestions ? Cheers

Read the article
VirtualBox 4.0.10 is now available for download

- by user12611829

VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

Read the article
2 folders in Sys/Class/Backlight?

- by zebrapie

ISSUE: Backlight brightness does not change. More Detail: Brightness will not change, using both 'System Settings-Screen', or FN keys (Brightness bar shows and moves, but screen brightness does not change). Notcied a post in this thread (http://ubuntuforums.org/showthread.php?t=1866283) about having multiple folders in Sys-Class-Backlight... I HAVE TWO FOLDERS TOO! 'intel_backlight' and 'acpi_video0' Using the function keys, alters the value in the acpi_video0's 'Brightness' file - But doesn't actually alter the brightness of the screen. If I add 'backlight=vendor' in Grub, my function keys then edit the value in the 'Intel_Backlight brightness file. - But again doesnt actually change the brightness of the screen. Computer: Fujitsu Siemans Pi2515, Intel Integrated Graphics, No hdd partition. Already Tried: -Editing grub to contain: acpi_osi=Linux acpi_backlight=vendor -http://ubuntuguide.net/change-screen-brightness-with-fn-key-in-ubuntu-11-0410-10 -sudo apt-get install acpi -$ sudo setpci -s 00:02.0 F4.B=20 -Brightness does not adjust in fallback mode either. -Reinstalling OS, Using Linux Mint (Same problem). -Upgrading and downgrading BIOS. Many thanks for reading, I understand this problem may need a bit of a Linux pro to sort. If anyones up for the challenge i'll spend any amount of time being walked through this, posting results. Don't want to give up here!

Read the article
Build 2013–Keynote Thoughts

- by D'Arcy Lussier

Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/06/26/153243.aspxSome thoughts on the Build 2013 keynote. They Listened to Feedback while Keeping to their Plans I am one of the people in the “bring back the start menu” camp. I want my start menu. I *like* my start menu. Microsoft heard that and put it back, fantastic. But they implemented it in a way that still pushes the Windows 8 UI – and I’m actually pretty happy with it. When you hit the Start menu, you get the live-tiles displayed overlaying the desktop. But you can also swipe from the bottom to get the “all-applications” view. This, in essense, is really what those that like the Start Menu want. I believe it was mentioned that you can configure the all-applications view to be the default. They’re Committed to Improving Windows 8 The commitment to rapid deployments Ballmer talked about is crucial to Windows 8’s success. They need to keep it evolving quickly to maintain the interest of users and developers. I think the little improvements they showed are excellent (hands-free mode, multi window docking, better multi-monitor support, new developer controls, etc.). Hardware Vendors are Committed to Windows 8 They showed off a number of new hardware products (Windows 8 and Windows Phone). The Surface’s introduction to the market has done nothing to dissuade their hardware partners. Bing as a Platform is Huge for Developers!!! This was the biggest take-away from the keynote! What the team is doing with Bing not as a search engine but as a developer API is very impressive! I’m going to be diving into this over the rest of Build so watch more blog posts coming on it. Azure, Office 365, and other topics will be covered at tomorrow’s keynote. So far, great kick off to Build. Now on to sessions! D

Read the article
Battery Life in ubuntu 14.04

- by user287466

Today i had fresh installation of ubuntu 14.04 previously i had ubuntu 12.04 and had 5 to 6 hours of battery backup even at constant work, but in 14.04 getting 3 hrs only, tried with tlp but no use. lspci: 0:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

Read the article
Can't boot from USB - 11.04 / Exopc

- by Charles

I can't find the answer to this anywhere. I am new to Ubuntu, please help! I have a wetab, except now I don't, because I put Ubuntu 10.10 over the top of it (meant to dual boot, but that's another story). I upgraded to 11.04 out of curiosity. It's good, but not for touchscreen tablets - no multi touch for example. I want to get back the wetab OS now. I have all the files, and I have a bootable gparted USB stick. The problem is I can't seem to boot from USB. The "wetab" PC is actually an ExoPC, so it has only the hardware button and a soft button in the top corner. Using the wetab OS method of reaching BIOS with the hard and soft buttons doesn't work now, I only get a menu asking if I want to run Ubuntu in recovery mode, run a limited command line, or do a memory check. I need to either repartition the drive so I can dual boot with WeTabOS, or just wipe over Ubuntu and start again. How do I do this? I have also tried hammering F11, Del, F8, F1, many other combinations! Edit: I do have access to USB keyboard and mouse

Read the article
Ubuntu 11.10 very slow compared to Windows

- by Patrick

I'm new to Ubuntu/linux. Since my PC is very old and not very fast with Windows 7, I decided to give Ubuntu a try, so I downloaded and installed Ubuntu 11.10 today. When I first started it, I had bad 800x600 resolution and it was very slow and annoying. So I installed a driver for my graphic card and now everything looks very nice (1280x1024).But I think it's still far slower than Windows 7. I tried to run in Ubuntu like a few people suggested on the forum but if I log in I get a black screen saying something like "this video mode cannot be displayed". I get that same screen when booting Ubuntu btw, but after about 15 seconds it disappears and just starts Ubuntu. I also installed other drivers for my graphic card but everything stayed the same. I noticed that i.e. when I open Firefox or system settings it takes about 5 seconds till it opens (while Windows 7 takes under 1 second to start i.e. Chrome) and when I do this my CPU usage gets to 100% for a short time. Computer specs: Memory: 2GB RAM Processor: Intel Pentium 4 2.8GHz Graphics Card: Nvidia GeForce 6800 400MHz. I read on various forums that 11.04 works flawless on many PCs, where 11.10 is very slow. Should I install 11.04 or could anybody help me with this problem?

Read the article
RetinaPad Enables Retina Display for iPhone Apps on the iPad

- by Jason Fitzpatrick

RetinaPad is an iPad application that actives the Retina Display resolution on iPhone applications to increase the clarity on the iPad. It’s a feature that should be built-in but is currently only available for jailbroken iPads. The premise is simple. Currently iPads lack support for the Retina Display level resolution that iPhone apps are capable of if displaying. RetinaPad allows you to stop using the ugly and blocky simple doubling available on the iPad and start accessing the higher resolution Retina Display mode for iPhone applications on the iPad. It’s such a trivial thing that it’s outright shameful Apple doesn’t include it by default. You should have to jailbreak your device to unlock functionality that should be there right from the factory. Check out the demo video below to see it in action: Fire up your jailbroken iPad, launch Cydia and search for RetinaPad. Retina Pad is $2.99, iPad only. How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

Read the article
Error on /home prevents OS boot

- by mdrg

Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

Read the article
Why is text on my TV monitor all grainy?

- by searchfgold6789

I have successfully installed the Catalyst drivers and hooked up my 1080p TV to the Radeon HD 5750's HDMI port and now it is working. There only seems to be one issue - most images appear OK, at least to my eyes, but text is grainy and difficult to read (not sure how well it can be seen in the picture): It works fine with a smaller screen, and hopefully you can see it with the new pictures which are only slightly better, but images are rendered a little funny too. Changing antialiasing does nothing and changing the refresh rate only makes a slight change if any. The small monitor I have works fine. Smaller resolutions such as 1024x768 look OK but are the wrong aspect ratio. I have tried renaming the input mode on the TV to "PC", and that helped... a little bit. Also, I tried a different PC with the same result. Messing around extensively with the ATI Catalyst Control Center also did not help. I am wondering if there is anything else I can try to increase the quality so it is more usable.

Read the article
Drupal migration failed

- by Marco

First of all, I'm new to Drupal and the work I have to do is some kind of too hard. My old colleague (webmaster) had a server with a multisite Drupal 6 installation. Sites and their dirs were (e.g.) Sites Site directory b.a.mycompany.com /drupal_install_dir/sites/b.a.mycompany.com c.a.mycompany.com /drupal_install_dir/sites/c.a.mycompany.com d.a.mycompany.com /drupal_install_dir/sites/d.a.mycompany.com Unluckily my colleague moved and server hdd aren't in my hands: all I have is a backup of /drupal_install_dir and three sql dumps (one for each site). I had to restore three sites, but changing them as z.mycompany.com/b z.mycompany.com/c z.mycompany.com/d Beeing a sysadmin, I Extracted tar.gz backup file under wwwroot (let's call full path to extracted directory /new_install_dir) Restored three databases Created mysql users and give them correct GRANTS on databases Then (trying to restore at least first site) I changed /new_install_dir/sites/settings.php putting correct database connection data and new basepath. But there is no way I can see my new site, simply it doesn't work. Watching /var/log/apache2/error.log I saw Drupal searching for main drupal database; so I created that db too setting user and grants, but dump file is empty. Well, now I can run something like install.php or update.php, but my site is not shown. Is there something I can do? Do I have to walk another way? Consider I searched the web, but I'm not able to find a guide that can help me for my problem. Ah, I forgot: before producing the backup, my colleague set site in maintenance mode. When I try to run z.mycompany.com/?q=user (trying to login) nothing happens. I'm really stuck...

Read the article
Ubuntu 12.04 fresh install wont boot up

- by user147220

im running ubuntu 12.04 and it refuses to boot up. the screen will come on for a second, the mosue will appear, then itll go black again all inside about 3 seconds. i let it just do that for a while and eventually a window popped up saying i had a display issue. I didn't have a mouse but there was a button saying "ok" at the bottom that i couldnt click on. i hit enter, got through that screen, now im looking at another that says "What would you like to do?" - run in low-graphics mode for just one session - reconfigure graphics - troubleshoot the error - exit to console login then two buttons, cancel, and ok. I dont have a mouse and its not letting me navigate between these options with tab. firstly, if i make it through these windows will it get me into the computer so i can try and fix whats going on? also, whats going on here? also, how can i click on these buttons without the use of tab or a mouse?

Read the article
Win8 x64 Laptop (Samsung) unable to boot after installing Ubuntu

- by user285872

I posted here a while back and no one was able to help me so I am going to try to explain my problem better. I have a Samsung series 7 Ultrabook and I connected a USB optical drive with an Ubuntu 14.04 installation disc. I did not set or change any of my partitions, however, as I mainly wanted to just be able to boot from the disc and fool around with Ubuntu. Upon restarting my computer I get a blue-screen message saying: Recovery Your PC needs to be repiared The Boot configuration date file is missing some required information. File: \BCD Error Code: 0xc000000d You'll need to use the recovery tools on your installing media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. However I am never given the option to even try to boot to anything. When I turn my computer on the optical drive spins and then after a moment or two comes to a halt. I turned off safeboot and switched it to CSM (I believe that is what it is called) mode, and that makes it so when I turn my computer on it takes me to a Windows Recovery screen. I am able to change the date I want to recover and view all the applications installed, however upon recovering Windows says "All boot options are tried. Press key to recover with factory image using Recovery or any other keys for next boot loop iteration." It seems to be stuck in a loop. Can someone please help me?! I'm so confused and nothing is working!

Read the article
Why is my HDD going back from standy?

- by Pablo

My hard drives, connected to Ubuntu server are producing the following log every exactly 5 minutes. Nov 1 14:10:50 localhost kernel: [ 1602.884936] ata2.00: hard resetting link Nov 1 14:10:51 localhost kernel: [ 1603.226804] ata2.01: hard resetting link Nov 1 14:10:52 localhost kernel: [ 1604.274533] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 1 14:10:52 localhost kernel: [ 1604.274548] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 1 14:10:52 localhost kernel: [ 1604.356669] ata2.00: configured for UDMA/133 Nov 1 14:10:52 localhost kernel: [ 1604.375247] ata2.01: configured for UDMA/133 Nov 1 14:10:52 localhost kernel: [ 1604.375265] ata2: EH complete I don't think this is related to hard drive failure, because it happens for ALL hard drives connected and ONLY when I write spindown_time = 12 in /etc/hdparm.conf. The reason I add this value is to put disks into standby mode after 60 seconds, which is happening after that period (checked with hdparm -C). The first clue I thought that smartd was running and spinning the drive. However, I couldn't find it in ps -aux | grep smart. Additionally, iostat does show that nobody accessed those drives, since Blk_read, Blk_wrtn remain unchanged. I also killed all processes that may be doing something with hdd(eg SAMBA). So I guess the problem is solely with hdparm... I have no more clue where that 5 minute value hides.

Read the article
after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

- by Ricardo

After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

Read the article
problem in connecting Reliance booadband +

- by Athira R

I tried connceting reliance broadband in ubuntu. then an autorun prompt will come. when i click install another pop up coming saying autorun file not found. And when i checked in Internet connection to add connection. Reliance broadband option iteself is not there as connected device. This is Athira. I could not find any add comment option on my main question. So i created a new account and adding as new answer to ur question. athira@athira-laptop:~$ sudo lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 004: ID 12d1:1505 Huawei Technologies Co., Ltd. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0421:0508 Nokia Mobile Phones E65 (PC Suite mode) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 064e:a103 Suyin Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub athira@athira-laptop:~$ i got this after running it in ubuntu 10.04

Read the article
Ubuntu cannot see Windows 7 partitions on install

- by Nash0

I've been trying to install Ubuntu 10.10 as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Ubuntus installer by booting from CD it sees the entire hard drive as unallocated space. I have also tried Kbuntu 10.10, Fedora 14, booting a Gparted 0.8.0 usb drive, and Ubuntu "install in Windows" with wubi they all have problems. EDIT: When I run the "try Ubuntu" option on booting from cd it can mount my Windows partition and I can view the files. The output of sudo parted -l when running in try Ubuntu mode: Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA ST9500420AS (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

Read the article
Ubuntu installer shows three small screens

- by Sylan

I'm trying to install Ubuntu (or Kubuntu, which I tried first) 13.04 on a new laptop. I need the install in UEFI mode in order to properly dual boot with Windows 8. I've managed to overcome most of the UEFI issues up to the installer, which appeared as a black screen until I used nomodeset. Now the installer will appear, however it does fit my screen size. Instead, it appears as three small identical screens across the top of the monitor. I thought the problem could be solved by changing the display resolution in GRUB via changing the vga number, but this simply expanded the width of the three screens. While I could install it at this point, the identical screens are too small for me to be able to read the installer. As well, the "Try Ubuntu" option simply gets stuck at a black screen. I'm afraid these problems may persist through the installation if I attempted to continue. Additional information: The laptop is a Lenovo Ideapad Y580 with an i7 3630qm processor, and a GeForce GTX 660m graphics card which works alongside an Intel HD 4000 integrated card via Optimus.

Read the article
Resized Ubuntu 14.04 partition will not boot

- by user292577

First, a little background info: I intended to install Ubuntu alongside OS X, but I accidentally erased my entire hard drive and was left with Ubuntu alone. Yesterday, I finally tried to create a desperate partition and OS X. I successfully shrank my Ubuntu partition and created ~40 GB of free space. I used gparted to do this. At first I tried to use Internet Recovery to install OS X on the unallocated space I had created, but discovered I couldn't. I went back to gparted and created a FAT partition with that space. I'm pretty sure I actually did this using my Ubuntu partition on my hard drive (the one I had just shrunken), rather than the USB live boot I had used to shrink it. Therefore, at this point, I think my Ubuntu partition was still functioning properly. I went back to internet recovery and used disk utility to turn the FAT partition into a Mac OS Extended (Journaled) [HFS/HFS+] partition. I believe this is probably where the problem occurred. I successfully reinstalled OS X and found it to be fully functioning. However, when I tried to boot back into the Ubuntu partition all I got was a black screen with a little white cursor (it looks similar to a terminal screen/the Mac DFU mode, but I can't type anything into it. Is there anything I can do to repair my Ubuntu partition? If not, can I at least recover the data from it? Thank you for any help.

Read the article
Can't get utouch to show available wifi networks

- by kellrobinson

I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331 | Next Page >