Search Results

Search found 59951 results on 2399 pages for 'laptop memory question'.

Page 324/2399 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

  • How much memory an app can use on iPad?

    - by Saurabh
    Hi All, Currently I am writing an iPad app. I am using a lot of images in this app around 40 MB of images! This app works fine in simulator but crashing on device. I think the problem is with memory. I wanted to know how much memory I can use on iPad? Thanks Saurabh

    Read the article

  • How to force my laptop to use the discrete GPU?

    - by Anton Roth
    My laptop (Asus X7BSV) is stuck using only the integrated GPU. It has a nVidia GT540M as well, but I cannot get it to work. I am using a Windows 7 x64 with latest drivers. This occurred after I attached an external USB monitor I need for work, and since then I cannot swap back to the nVidia GPU (dxdiag for example says that the primary GPU is the Intel integrated one). Asus support asked me to completely reinstall the system, but that is something I do not want to do. I checked the BIOS, there is no option as to what GPU to use. The nVidia card itself is working, since I can use CUDA on it, and it worked with a Ubuntu Live CD. In the nVidia software management I tried setting it to global setting, high performance GPU (nVidia), but that had no impact. What am I missing here? I did uninstall/delete all drivers and software related to the external monitor, but that did not help.

    Read the article

  • Is it possible to share a big-screen monitor - switching between personal Windows 7 laptop in the office?

    - by Nam Gi VU
    Hi everyone, This would be strange to ask this but I'll try a go :). The situation is as below. We use laptop & wifi in the office. We often make demo to each other and need to show the demo on a big screen mornitor hang in the middle of the room :). I want to switch the display between each of the staffs using LAN wifi network. Please give me some suggestions on how to do that. Thank you! Nam.

    Read the article

  • Flash ActiveX: How to Load Movie from memory or resource or stream?

    - by yuku
    I'm embedding a Flash ActiveX control in my C++ app (Flash.ocx, Flash10a.ocx, etc depending on your Flash version). I can load an SWF file by calling LoadMovie(0, filename), but the file needs to physically reside in the disk. How to load the SWF from memory (or resource, or stream)? I'm sure there must be a way, because commercial solutions like f-in-box's feature Load flash movies from memory directly also uses Flash ActiveX control.

    Read the article

  • How do I restore a Dell Inspiron 1521 laptop to factory defaults?

    - by Solignis
    I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

    Read the article

  • What is the fastest CPU my laptop can support?

    - by Dave
    I have a Dell Latitude D830 laptop and would like to speed up compile times on it. I have confirmed that it is, indeed, the processor time that is the bottleneck. How can I tell what processors are compatible with the motherboard to pick the best available? I run dual boot Ubuntu Maverick and Windows 7. lshw tells me that my motherboard is OHN338 from Dell, Inc. If anyone has a generic solution, i.e. "For motherboard X, here is how you find out what processors are supported," that would be make this question much more useful to future visitors. But if you also know of a way to find out specific to my model, that would be great as well.

    Read the article

  • I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

    - by Bong Paduano
    I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

    Read the article

  • How to set Laptop Brightness in Gnome and /proc on Thinkpad W510?

    - by hakre
    I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness I'm using the nouveau driver. With the nvida driver the brightness can not be controlled.

    Read the article

  • How do I connect a laptop running Windows 7 to an Android phone using WiFi Direct?

    - by user130768
    From where I am sitting, Windows 7 does not appear to support WiFi Direct connections to Android mobile devices. Specifically, turning on WiFi Direct on my Samsung Galaxy S II does not make the device visible as a potential WiFi network connection. Windows 8 is said to support WiFi Direct, but I have no desire to upgrade at this time. I have successfully set up ad hoc WiFi connections between the S II and my laptop before, but as you may be aware, these are not the same as WiFi Direct. Before posting this question, I searched [ "Windows 7" "WiFi Direct" ] and variations thereof, and dutifully slogged through dozens of lame or irrelevant responses on various forums, badly made YouTube videos, and probable Trojan horse distribution sites. If someone out there knows how to do this, it's buried in the noise.

    Read the article

  • iPhone Debugger Message -- Weird

    - by Bill Shiff
    Hello, I have an iPhone app that I've been working on and have recently upgraded my version of XCode. Since the upgrade, I can build and debug in the iPhone Simulator just fine, but when I try to debug on an attached device I get the following messages: From Xcode4: GNU gdb 6.3.50-20050815 (Apple version gdb-1510) (Fri Oct 22 04:12:10 UTC 2010) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001 sharedlibrary apply-load-rules all warning: Unable to read symbols from "dyld" (prefix __dyld_) (not yet mapped into memory). warning: Unable to read symbols for (null)/Library/Frameworks/MessageUI.framework/MessageUI (file not found). warning: Unable to read symbols from "MessageUI" (not yet mapped into memory). warning: Unable to read symbols for (null)/Library/Frameworks/MapKit.framework/MapKit (file not found). warning: Unable to read symbols from "MapKit" (not yet mapped into memory). warning: Unable to read symbols from "Foundation" (not yet mapped into memory). warning: Unable to read symbols for (null)/Library/Frameworks/UIKit.framework/UIKit (file not found). warning: Unable to read symbols from "UIKit" (not yet mapped into memory). warning: Unable to read symbols for (null)/Library/Frameworks/CoreGraphics.framework/CoreGraphics (file not found). warning: Unable to read symbols from "CoreGraphics" (not yet mapped into memory). warning: Unable to read symbols from "CoreData" (not yet mapped into memory). warning: Unable to read symbols from "QuartzCore" (not yet mapped into memory). warning: Unable to read symbols from "libgcc_s.1.dylib" (not yet mapped into memory). warning: Unable to read symbols from "libSystem.B.dylib" (not yet mapped into memory). warning: Unable to read symbols from "libobjc.A.dylib" (not yet mapped into memory). warning: Unable to read symbols from "CoreFoundation" (not yet mapped into memory). target remote-mobile /tmp/.XcodeGDBRemote-3836-28 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none [Switching to thread 11523] [Switching to thread 11523] gdb stack crawl at point of internal error: 0 gdb-arm-apple-darwin 0x0013216e internal_vproblem + 316

    Read the article

  • how did my laptop lose daylight savings time on power loss?

    - by EndangeringSpecies
    it was an old laptop that may or may not have dead CMOS battery (at least it had time reset to 0 when I dusted it off). So, it was plugged into power for awhile without the main battery and the clock was correct. Then there was a power outage. When I subsequently turned it on, surprise-surprise, it had one hour off correct time. So the clock apparently kept running during the outage, but daylight savings time info vanished (from disk? where is it stored?) How come?

    Read the article

  • I still can't ask the question I want to ask! [closed]

    - by Dennis
    Possible Duplicate: Unable to post question despite having no hyperlinks I'm trying to leave a real question but I keep getting this error: We're sorry, but as a spam prevention mechanism, new users can only post a maximum of one hyperlink. Earn 10 reputation to post more hyperlinks. I have removed all the hyper links in the question but I'm still getting the error. Is there someone I can email the code to so we can figure out what the problem is? And I really didn't appreciate the smart ass comment left by whom ever close my last question.

    Read the article

  • How to setup a Linux machine to remotely use laptop screen as a second display?

    - by Ignas Limanauskas
    I am looking for a similar solution to MaxiVista, but for Linux (Ubuntu). I have an Ubuntu machine with just one display attached, but I also have a Windows laptop running a virtual machine with Ubuntu installed. I figured there must be a way to trick the main Ubuntu machine remotely use the virtual machine's display capabilities. After all, X11 does support forwarding and things like that. Any ideas how to do it using VNC? I saw some references to xdmx, but instructions so far are vague and do not seem to work on my machine(s).

    Read the article

  • plugging in a 3.3V 50pin laptop HDD to USB?

    - by barlop
    I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

    Read the article

  • Is there a simple way to make my laptop always turn on muted? [closed]

    - by tehp
    Possible Duplicate: How to mute the sound output on Windows Start up? I carry a laptop around. Sometimes I'll open it up in meetings or other quiet settings. The speaker is interrupted by the windows startup noise or Pandora refreshing it's page and starting to play a song or some other random computer noise. Is there a simple way to mute the sound on startup/resume/whatever? Kind of like the BIOS option to turn on or off the Num Lock.

    Read the article

  • How can I stream video from my XP sp3 desktop to my win 7 laptop?

    - by Robb
    I would like to stream media from my XP sp3 desktop to my Win7 laptop. I currently have Windows Media Player 11 on both machines. The XP one is set up for the media sharing service as far as I can tell. I have also set the 'Play To' option to my Win 7 machine on the XP WMP. However, the only way I've been able to 'stream' is to simply tell my Win7 WMP to add a network folder to its libraries. This seems to work over the wifi but it does stutter a touch, even with a 20 second buffer. The stuttering also appears randomly, maybe 4-5 times during a 22 minute show. I feel like I'm doing something wrong. Is this setup OK or am I missing something?

    Read the article

  • Unable to ping between subnets and out to internet

    - by battlemidget
    My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

    Read the article

  • What happens in memory when calling a function with literal values?

    - by Drise
    Suppose I have an arbitrary function: void someFunc(int, double, char); and I call someFunc(8, 2.4, 'a');, what actually happens? How does 8, 2.4, and 'a' get memory, moved into that memory, and passed into the function? What type of optimizations does the compiler have for situations like these? What if I mix and match parameters, such like someFunc(myIntVar, 2.4, someChar);? What happens if the function is declared as inline?

    Read the article

  • What's the easiest way to upgrade a single laptop hard drive?

    - by rutherford
    My HD is coming near the end of it's life and I wondered if producing an image of the original was all that was required? What's the best software to use for this and how can I accomplish it - can I use my other laptop for the image file or do I need to buy an external HD to accomplish the clone? Does having several partitions of both FAT32 and NTFS with partition magic installed affect things at all? Is it just a matter of making the image, swapping in the new HD and copying the image to that?

    Read the article

  • Does "opening a file" mean loading it completely into memory?

    - by mystify
    There's an AudioFileOpenURL function which opens an file. With AudioFileReadPackets that file is accessed to read packets. But one thing that stucks in my brain is: Does AudioFileOpenURL actually load the whole monster into memory? Or is that a lightweight operation? So is it possible to read data from a file, only a specific portion, without having the whole terabytes of stuff in memory?

    Read the article

  • Is there any memory leak in the normal routine of sqlite3_*()?

    - by reer
    A normal routine of sqlite3_prepare_v2() + sqlite3_step() + sqlite3_finalize() could contain leak. It sound ridiculous. But the test code seems to say it. Or I used the sqlite3_*() wrongly. Appreciate for any reply. __code________________________ include include // for usleep() include int multi_write (int j); sqlite3 *db = NULL; int main (void) { int ret = -1; ret = sqlite3_open("test.db", &db); ret = sqlite3_exec(db,"CREATE TABLE data_his (id INTEGER PRIMARY KEY, d1 CHAR(16))", NULL,NULL,NULL); usleep (100000); int j=0; while (1) { multi_write (j++); usleep (2000000); printf (" ----------- %d\n", j); } ret = sqlite3_close (db); return 0; } int multi_write (int j) { int ret = -1; char *sql_f = "INSERT OR REPLACE INTO data_his VALUES (%d, %Q)"; char *sql = NULL; sqlite3_stmt *p_stmt = NULL; ret = sqlite3_prepare_v2 (db, "BEGIN TRANSACTION", -1, &p_stmt, NULL); ret = sqlite3_step ( p_stmt ); ret = sqlite3_finalize ( p_stmt ); int i=0; for (i=0; i<100; i++) { sql = sqlite3_mprintf ( sql_f, j*100000 + i, "00000000000068FD"); ret = sqlite3_prepare_v2 (db, sql, -1, &p_stmt, NULL ); sqlite3_free ( sql ); //printf ("sqlite3_prepare_v2(): %d, %s\n", ret, sqlite3_errmsg (db)); ret = sqlite3_step ( p_stmt ); //printf ("sqlite3_step(): %d, %s\n", ret, sqlite3_errmsg (db)); ret = sqlite3_finalize ( p_stmt ); //printf ("sqlite3_finalize(): %d, %s\n\n", ret, sqlite3_errmsg (db)); } ret = sqlite3_prepare_v2 (db, "COMMIT TRANSACTION", -1, &p_stmt, NULL ); ret = sqlite3_step ( p_stmt ); ret = sqlite3_finalize ( p_stmt ); return 0; } __result________________________ And I watch the the process's run by top. At first, the memory statistics is: PID PPID USER STAT VSZ %MEM %CPU COMMAND 17731 15488 root S 1104 5% 7% ./sqlite3multiwrite When the printf() in while(1){} of main() prints the 150, the memory statistics is: PID PPID USER STAT VSZ %MEM %CPU COMMAND 17731 15488 root S 1552 5% 7% ./sqlite3multiwrite It sounds that after 150 for-cycles, the memory used by sqlite3multiwrite increase from 1104KB to 1552KB. What does it mean? memory leak or other thing?

    Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >