Search Results

Search found 10530 results on 422 pages for 'remote administration'.

Page 325/422 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

  • Using PostRequestHandlerExecute, Flush and Close to clean up after a request - why is this bad?

    - by Erwin
    After some requests I need to clean up after the user - by calling a remote web service to release some resources if I guess the user doesn't need them anymore. It is ok to leave them hanging and letting them time out on the other server, but the polite thing to do is to inform it that I do not need them anymore. I do not want to waste the users time waiting for cleaning - so I tried to find place to put it. First I tried Application_EndRequest, but I needed something later. Then I found PostRequestHandlerExecute which seemed like a nice place, but I still need a Flush and Close to release the connection to the user. Protected Sub Application_PostRequestHandlerExecute(ByVal sender As Object, ByVal e As System.EventArgs) Response.Flush() Response.Close() ' Simulation of clean up activity: System.Threading.Thread.Sleep(4000) ' Really a couple of web service calls End Sub Is there some other place I could put these lengthy clean up routines?

    Read the article

  • Uploading images to a PHP server from Android

    - by Samuh
    I need to upload an image to a remote PHP server which expects the following parameters in HTTPPOST: *$_POST['title']* *$_POST['caption']* *$_FILES['fileatt']* Most of the internet searches suggested either : Download the following classes and trying MultiPartEntity to send the request: apache-mime4j-0.5.jar httpclient-4.0-beta2.jar httpcore-4.0-beta3.jar httpmime-4.0-beta2.jar OR Use URLconnection and handle multipart data myself. Btw, I am keen on using HttpClient class rather than java.net(or is it android.net) classes. Eventually, I downloaded the Multipart classes from the Android source code and used them in my project instead. Though this can be done by any of the above mentioned methods, I'd like to make sure if these are the only ways to achieve the said objective. I skimmed through the documentation and found a FileEntity class but I could not get it to work. What is the correct way to get this done in an Android application? Thanks.

    Read the article

  • How to get roles with JSR 196 authentification in GlassFish?

    - by deamon
    I want to use a custom authentication module conforming to JSR 196 in GlassFish 3. The interface javax.security.auth.message.ServerAuth has the method: AuthStatus validateRequest( MessageInfo messageInfo, javax.security.auth.Subject clientSubject, javax.security.auth.Subject serviceSubject ) AuthStatus can be one of several constants like FAILURE or SUCCESS. The question is: How can I get the roles from a "role datebase" with JSR 196? Example: The server receives a request with a SSO token (CAS token for example), checks whether the token is valid, populates the remote user object with roles fetches from a database via JDBC or from REST service via http. Is the role fetching in the scope of JSR 196? How could that be implemented? Do I have to use JSR 196 together with JSR 115 to use custom authentication and a custom role source?

    Read the article

  • SecurityException when accessing (ejb2-) session bean via local interface in JBoss 5

    - by sme
    I have the following problem with an EJB 2 SessionBean when deploying in JBoss 5: The SessionBean (called LVSKeepAliveDispatcher) requires a specific user role (called "LVSUser"), specified by <method-permission > <description></description> <role-name>LVSUser</role-name> <method > <description></description> <ejb-name>LVSKeepAliveDispatcher</ejb-name> <method-name>*</method-name> </method> </method-permission> in ejb-jar.xml. I now want to access this SessionBean from a Service (i.e. a class implementing the org.jboss.varia.scheduler.Schedulable interface that is then registered as a service) running inside the same JBoss instance. This is my jboss-service.xml: <server> <mbean code="org.jboss.varia.scheduler.Scheduler" name="lvs:service=TranslationService"> <attribute name="StartAtStartup">true</attribute> <attribute name="SchedulableClass">de.repower.lvs.server.service.translation.TranslationService</attribute> <attribute name="SchedulableArguments"></attribute> <attribute name="SchedulableArgumentTypes"></attribute> <attribute name="InitialStartDate">NOW</attribute> <attribute name="SchedulePeriod">60000</attribute> <attribute name="InitialRepetitions">1</attribute> <attribute name="TimerName">jboss:service=Timer,name=TranslationServiceTimer</attribute> <depends><mbean code="javax.management.timer.Timer" name="jboss:service=Timer,name=TranslationServiceTimer"/></depends> <depends>jboss.j2ee:service=EJB,jndiName=de/repower/lvs/i18n/sessionbeans/LVSTranslation</depends> </mbean> As the service is deployed in the same vm as the session bean I want to call the session bean via the local interface, but I get a SecurityException when I try to create an instance. When instead I do a lookup of the RemoteInterface it works. This is the code inside the perform method of my service class: public void perform(Date now, long remainingRepetitions) { try { final UsernamePasswordHandler handler = new UsernamePasswordHandler(USERNAME, PASSWORD); final LoginContext lc = new LoginContext("client-login", handler); lc.login(); // Trying to instantiate an LVSKeepAliveDispatcher via remote interface // This part works LVSKeepAliveDispatcher localvHome = LVSKeepAliveDispatcherUtil.getHome().create(); LOGGER.info("Successfully instantiated an LVSKeepAliveDispatcher " + localvHome.toString()); // Trying to instantiate an LVSKeepAliveDispatcherLocal via local interface LVSKeepAliveDispatcherLocal localvLocalHome = LVSKeepAliveDispatcherUtil.getLocalHome().create(); // this code is unforunately never reached LOGGER.info("Successfully instantiated an LVSKeepAliveDispatcherLocal " + localvLocalHome.toString()); lc.logout(); } catch (final Exception ex) { LOGGER.error("Error: ", ex); } } Exception: 2009-02-17 10:38:02,266 INFO [lvsi18n] (Timer-2) Successfully instantiated an LVSKeepAliveDispatcher de/repower/lvs/server/service/alive/sessionbeans/LVSKeepAliveDispatcher:Stateless 2009-02-17 10:38:02,297 ERROR [org.jboss.ejb.plugins.SecurityInterceptor] (Timer-2) Error in Security Interceptor java.lang.SecurityException: Authentication exception, principal=internalSystemUser at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityContext(SecurityInterceptor.java:321) at org.jboss.ejb.plugins.SecurityInterceptor.process(SecurityInterceptor.java:243) at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:205) at org.jboss.ejb.plugins.security.PreSecurityInterceptor.process(PreSecurityInterceptor.java:136) at org.jboss.ejb.plugins.security.PreSecurityInterceptor.invokeHome(PreSecurityInterceptor.java:88) at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132) at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107) at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:639) at org.jboss.ejb.Container.invoke(Container.java:1046) at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:362) at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133) at $Proxy193.create(Unknown Source) at de.repower.lvs.server.service.translation.TranslationService.perform(TranslationService.java:68) at org.jboss.varia.scheduler.Scheduler$PojoScheduler.invoke(Scheduler.java:1267) at org.jboss.varia.scheduler.Scheduler$BaseListener.handleNotification(Scheduler.java:1235) at sun.reflect.GeneratedMethodAccessor281.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.mx.notification.NotificationListenerProxy.invoke(NotificationListenerProxy.java:153) at $Proxy87.handleNotification(Unknown Source) at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257) at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322) at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307) at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229) at javax.management.timer.Timer.sendNotification(Timer.java:1234) at javax.management.timer.Timer.notifyAlarmClock(Timer.java:1203) at javax.management.timer.TimerAlarmClock.run(Timer.java:1286) at java.util.TimerThread.mainLoop(Timer.java:512) at java.util.TimerThread.run(Timer.java:462) To further diagnose the error I debugged through the SecurityInterceptor and found that in the first case (successful creating an instance via the remote interface) the security context "lvs-security" (which I defined in login-config.xml) is being used whereas in the second case (failure when creating an instance via the local interface) the generic security context "CLIENT-LOGIN" is being used. This is the definition of the securit context "lvs-security" in login-config.xml: <application-policy name = "lvs-security"> <authentication> <login-module code = "org.jboss.security.ClientLoginModule" flag = "required"> </login-module> <login-module code = "de.repower.lvs.security.UsersRolesLoginModule" flag = "sufficient"> </login-module> <login-module code = "de.repower.lvs.security.login.LVSLoginModule" flag = "required"> <module-option name = "lvs-jboss-host">localhost</module-option> <module-option name = "lvs-jboss-jndi-port">1099</module-option> </login-module> </authentication> </application-policy> I'm now kind of stuck and hope someone can give me a hint about where to further look for the cause of the problem. This worked fine in JBoss 3.2.7. Edit: My current workaround for this problem: create a new container configuration in jboss.xml and remove the security interceptor stuff from this configuration use this newly created container configuration for all my session beans that I only use locally (i.e. via local interface).

    Read the article

  • What is best way to update digital certificates from server to many clients when certificate expires

    - by pramodc84
    One of my friend is working on issue related to updating expired digital certificates. He is working on Java application(Swings I guess), which has 4000 clients. All those need a digital certificate to connect to the application and this certificate expires every year. At the end of year he needs to update the certificate credentials for all clients. Currently this is manual process, done by connecting to each of 4000 systems either locally or by remote connection. He is got task to convert this process to be an automated process. Please suggest some solutions.

    Read the article

  • problem jquery.ui.autocomplete 1.8 with height and overflow with IE

    - by fabrice
    Hello, I have a probleme with jquery.ui.autocomplete 1.8 rc2 in IE7 or IE8 with the following CSS (inside jquery.ui.autocomplete.css) : .ui-menu { list-style:none; padding: 2px; margin: 0;display:block; height:200px; overflow:scroll; } I'm using the demo from the project called : demos\autocomplete\remote-jsonp.html It's working perfect with firefox but with IE7 or 8, each time I click on the scroll bar to see the end of the list, it selects an element instead of scrolling down. Do you please have a solution to have a fixed height with jquery.ui.autocomplete and a scroll bar working with IE ? Thank you very much

    Read the article

  • What does your ~/.gitconfig contain?

    - by Rajkumar S
    Hi, I am looking to pimp up my ~/.gitconfig to make it really beautiful and take maximum advantage of capabilities git can offer. My current ~/.gitconfig is below, what more would you add? Have some nice ~/.gitconfig you want to share? Any recommendations for merge and diff tools in linux? Post away and let's build a nice ~/.gitconfig [user] name = Rajkumar email = [email protected] [color] diff = auto status = auto branch = auto interactive = auto ui = true pager = true [color "branch"] current = yellow reverse local = yellow remote = green [color "diff"] meta = yellow bold frag = magenta bold old = red bold new = green bold [color "status"] added = yellow changed = green untracked = cyan [core] pager = less -FRSX whitespace=fix,-indent-with-non-tab,trailing-space,cr-at-eol [alias] co = checkout Thanks! raj

    Read the article

  • Message Driven Bean with Java Message Queue down

    - by Rafa de Castro
    I have the following problem deploying my application. It uses JMS and a remote openMQ for communication between servers. The problem is that the connection is not fully reliable so it can be up or down. For reconnecting I set the jms reconnect glassfish property so it reconnects if at some moment the connection gets lost. The problem arises when i try to deploy the application and there is no connection. It looks like it keeps retrying the connection but the application does not finish deployment until connection is available. Is it possible to configure it in any way that the deployment continues even if there is no connection and keeps retrying until there is connection available? Thanks a lot.

    Read the article

  • How Do I Restrict Repository Access via WebSVN?

    - by kaybenleroll
    I have multiple subversion repositories which are served up through Apache 2.2 and WebDAV. They are all located in a central place, and I used this debian-administration.org article as the basis (I dropped the use of the database authentication for a simple htpasswd file though). Since then, I have also started using WebSVN. My issue is that not all users on the system should be able to access the different repositories, and the default setup of WebSVN is to allow anyone who can authenticate. According to the WebSVN documentation, the best way around this is to use subversion's path access system, so I looked to create this, using the AuthzSVNAccessFile directive. When I do this though, I keep getting "403 Forbidden" messages. My files look like the following: I have default policy settings in a file: <Location /svn/> DAV svn SVNParentPath /var/lib/svn/repository Order deny,allow Deny from all </Location> Each repository gets a policy file like below: <Location /svn/sysadmin/> Include /var/lib/svn/conf/default_auth.conf AuthName "Repository for sysadmin" require user joebloggs jimsmith mickmurphy </Location> The default_auth.conf file contains this: SVNParentPath /var/lib/svn/repository AuthType basic AuthUserFile /var/lib/svn/conf/.dav_svn.passwd AuthzSVNAccessFile /var/lib/svn/conf/svnaccess.conf I am not fully sure why I need the second SVNParentPath in default_auth.conf, but I just added that today as I was getting error messages as a result of adding the AuthzSVNAccessFile directive. With a totally permissive access file [/] joebloggs = rw the system worked fine (and was essentially unchanged), but as I soon as I start trying to add any kind of restrictions such as [sysadmin:/] joebloggs = rw instead, I get the 'Permission denied' errors again. The log file entries are: [Thu May 28 10:40:17 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET websvn:/ [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET svn:/sysadmin What do I need to do to get this to work? Have configured apache wrong, or is my understanding of the svnaccess.conf file incorrect? If I am going about this the wrong way, I have no particular attachment to my overall approach, so feel free to offer alternatives as well. UPDATE (20090528-1600): I attempted to implement this answer, but I still cannot get it to work properly. I know most of the configuration is correct, as I have added [/] joebloggs = rw at the start and 'joebloggs' then has all the correct access. When I try to go repository-specific though, doing something like [/] joebloggs = rw [sysadmin:/] mickmurphy = rw then I got a permission denied error for mickmurphy (joebloggs still works), with an error similar to what I already had previously [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'mickmurphy' GET svn:/sysadmin Also, I forgot to explain previously that all my repositories are underneath /var/lib/svn/repository UPDATE (20090529-1245): Still no luck getting this to work, but all the signs seem to be pointing to the issue being with path-access control in subversion not working properly. My assumption is that I have not conf

    Read the article

  • Trouble connecting to vsftpd on ubuntu server

    - by littleK
    I have installed Ubuntu Server 10.10 and I am using it to host a domain that I have. I am trying to set up FTP for the server, but I am running into some problems. I have successfully installed vsFTPd and I have opened up ports 20, 21 on my firewall. In my vsFTPd configuration, I have enabled SSL. Every time I try to connect to my server via FTP, I receive a "Connection Refused" error. I have had a little more success with SSL disabled, however the connection process will time out after the LIST command (but it does accept my authentication). Here is my vsFTPd configuration, the SSL stuff is at the bottom: # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem # SSL ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES Thanks!

    Read the article

  • What useful GDB scripts have you used/written?

    - by nik
    People use gdb on and off for debugging, of course there are lots of other debugging tools across the varied OSes, with and without GUI and, maybe other fancy IDE features. I would like to know what useful gdb scripts you have written and liked. While, I do not mean a dump of commands in a something.gdb file that you source to pull out a bunch of data, if that made your day, go ahead and talk about it. Lets think conditional processing, control loops and functions written for more elegant and refined programming to debug and, maybe even for whitebox testing Things get interesting when you start debugging remote systems (say, over a serial/ethernet interface) And, what if the target is a multi-processor (and, multithreaded) system Let me put a simple case as an example... Say, A script that traversed serially over entries to locate a bad entry in a large hash-table that is implemented on an embedded platform. That helped me debug a broken hash-table once.

    Read the article

  • How do you test your blackberry application on the device?

    - by Kai
    This may sound very noobish, but I can't seem to get my app to my blackberry. I was trying to follow the beginning blackberry development book's guide, but maybe I just missed the point somewhere. For remote download, Is it really as simple as drop the COD and JAD files in the same folder on your server then just navigate to the URL with your device's browser? The book says it should prompt a download screen, but all I get is a page full of cryptic characters. My app is a simple slideshow. Uses no signed things and is not MDS enabled. Did I forget something? Any help would be appreciated. Thanks

    Read the article

  • LocalReport (WebForms) and Partial Trust, for PDF Generation

    - by Peet Brits
    My goal is to generate a PDF for display in a web page, either as aspx or with a generic handler. (This will link from a Silverlight page, but this is irrelevant to the problem.) The problem is that LocalReport (Microsoft.Reporting.WebForms; Microsoft.ReportViewer.WebForms.dll) requires full trust, and our hosting server does not allow full trust. I am aware that ReportViewer has a remote mode that will allow it to run with partial trust, but for that I need a report server url which should probably have full trust as well, which does not solve anything. So how do I generate PDFs from WebForms in a partially trusted environment?

    Read the article

  • How to silently import a Certificate into a specific Certificate Store?

    - by Adriaan
    I am attempting to import a Certificate into the Current User - Personal store using the command line "importpfx -f [certificate name.p12] -p [password] -t USER -s Personal". It works, but for reasons I don't understand there are now two Personal stores under the Current User, and the imported certificate is in the new Personal store. When I try to connect to the website of [well-known money transfer service], it fails. However, if I manually import the certificate using MMC into the original Personal store, it works. My question is: How can I force IMPORTPFX to import the certificate into the original Personal store, and how can I delete the new Personal store? Context: I need to do a silent import of certificates on 3000+ remote point-of-sale devices, so it needs to be a silent install via PSEXEC (SysInternals).

    Read the article

  • Referencing code in VB.NET

    - by akramnik
    I'm not at all familiar with VB.NET or ASP. I need to create a simple page which makes a call to a remote web service. I used the wsdl utility which comes with the DotNet SDK to generate a service proxy and write it to a VB file. Unfortunately I have no idea how to reference this code in either my ASPX file or the code behind VB file so I can create an instance of the proxy. Edit: I should have qualified this by noting that I'm not using visual studio. I just coded up a .aspx with a .vb behind it and dropped it into an IIS location. Is there a way to do what you're suggesting outside of VS?

    Read the article

  • XP OEM licensing when reinstalling Windows XP

    - by mindas
    My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

    Read the article

  • Enumerate shared folders on Windows with low privileges

    - by Phil Nash
    Using C++ (VS2008) I need to be able to enumerate all shared folders on the current machine and get or construct the local and remote names. We've been using NetShareEnum for this fairly successfully, but have hit a problem where we need to run with a user account with low privileges. To get the local path using NetShareEnum we need to retrieve at least SHARE_INFO_2 structures - but that requires "Administrator, Power User, Print Operator, or Server Operator group membership". I've been trying to use WNetOpenEnum and WNetEnumResource instead but I don't seem to be getting the local name back for that for shares either - and I can't seem to get it to enumerate just local resources - it goes off and finds all shared resources on the local network - which is not an acceptable overhead. So I'd either like help on where I'm going wrong with WNetEnumResource, or a suggestion as to another way of doing this. Any suggestions are much appreciated.

    Read the article

  • SQL 2008 Database tuning advisor won't start

    - by Andrew Hancox
    For some reason I can't get DTA to connect to my development machine. It connects to a remote DB just fine but when I point it to my dev machine I get an error saying: Failed to initialize MSDB database for tuning (exit code: -1073741819). I'm pretty sure it's not a permissions issue since I've used profiler to capture what it's doing and all of the commands it's run so far look fine and are being run under my account which is associated with the sysadmin role, when I run them in sql management studio they go through fine. I'm pretty convinced that the problem is related to creating the objects in MSDB that are used by DTA but I tried creating these manually (I found scripts on the web) and it just seems to push the problem along the line slightly. I'm going out of my mind - have even tried reinstalling SQL but that's not fixed it. I'm using SQL 2008 with SP1 (10.0.2531) on windows server 2008 (patched up to date). SAVE ME!!!!!

    Read the article

  • How to remove accent characters from an InputStream

    - by Samuh
    I am trying to parse a Rss2.0 feed on Android using a Pull parser. XmlPullParser parser = Xml.newPullParser(); parser.setInput(url.open(), null); The prolog of the feed XML says the encoding is "utf-8". When I open the remote stream and pass this to my Pull Parser, I get invalid token, document not well formed exceptions. When I save the XML file and open it in the browser(FireFox) the browser reports presence of Unicode 0x12 character(grave accent?) in the file and fails to render the XML. What is the best way to handle such cases assuming that I do not have any control over the XML being returned? Thanks.

    Read the article

  • How to kill mysql process through C#.

    - by deepesh khatri
    I am getting "too many connections" problem in an Asp .Net Mvc application which get fix when i manually kill process through Mysql v6.56 IDE, But on remote hosting computer where i can't kill process each time how can i fix this error. I have tried making a connection to information_schema DB's PROCESSLIST table but when connection is about to execute command there comes an error "access denied of root@loclahostto information_schema". I also have tried to grant all privileges to root@loclahost but still i am not able to fix this problem. I have been coding the same way from last two years but in this application i am getting this problem i have use close each connection in every method. Please if some one have ever got this problem or know the answer.Please help me. Thanx in advance

    Read the article

  • Can't Get Virtual Users Setup in VSFTPD -Tried Everything

    - by N.T.
    Have Ubuntu 11.10 with vsftpd installed and working. Can not get virtual users setup at all? Vsftpd will allow main Ubuntu owner account to login, but nothing else? I've followed several tutorials on adding virtual users, but nothing works? I just need to add 2 virtual users and have them be able to upload files to vsftpd Ubuntu computer from other computers on my Lan network. Everywhere I've looked, people just point toward tutorials on adding virtual users, but that just is NOT working. I've been struggling with this for over a week now! PLEASE Help. Thanks. I'll even give a donation if someone can figure this out. here is the vsftpd.conf file I am using. I copied the original, and make a new one, every time I try a tutorial. So far, none have worked. Here is the vsftpd.conf file I'm using. (I hope this helps?) # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to Sage FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd local_root=/media/FilesDrive # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem

    Read the article

  • objective-c EXC_BAD_ACCESS in my code...

    - by Mark
    I'm new to objective-c and Im trying to write a little sample app that gets some XML from a remote server and outputs it to the console, but when I do it I get a EXC_BAD_ACCESS which I dont understand: NSString *FeedURL = @"MYURLGOESHERE"; NSURLRequest *theRequest = [NSURLRequest requestWithURL:[NSURL URLWithString:FeedURL]]; NSURLResponse *resp = nil; NSError *err = nil; NSData *response = [NSURLConnection sendSynchronousRequest: theRequest returningResponse: &resp error: &err]; NSString *theString = [[NSString alloc] initWithData:response encoding:NSUTF8StringEncoding]; NSLog(@"Response: %@", theString);]; [resp release]; [err release]; When I comment out the [resp release] line I dont get it anymore, can someone please explain this to me :) Thanks

    Read the article

  • Why can't I use SSL certs imported via Server Admin in a custom Apache install?

    - by morgant
    I've got a couple of Mac OS X 10.6.8 Server web servers that run a custom AMP255 (Apache 2.x, MySQL 5.x, and PHP 5.x) stack installed using MacPorts. We've got a lot of Mac OS X Server servers and generally install SSL certs via Server Admin and they "just work" in the built-in services, however, these web servers have always had SSL certs installed in a non-standard location and used only for Apache. Long story short, we're trying to standardize this part of our administration and install certs via Server Admin, but have run into the following issue: when the certs are installed via Server Admin and referenced in our Apache conf files, Apache then prompts for a password upon trying to start. It does not seem to be any password we know, certainly not the admin or keychain passwords! We've added the _www user to the certusers (mainly just to ensure they have the proper access to the private key in /etc/certificates/). So, with the custom installed certs we have the following files (basically just pasted in from the company we purchase our certs from): -rw-r--r-- 1 root admin 1395 Apr 10 11:22 *.domain.tld.ca -rw-r--r-- 1 root admin 1656 Apr 10 11:21 *.domain.tld.cert -rw-r--r-- 1 root admin 1680 Apr 10 11:22 *.domain.tld.key And the following in the VirtualHost in /opt/local/apache2/conf/extra/httpd-ssl.conf: SSLCertificateFile /path/to/certs/*.domain.tld.cert SSLCertificateKeyFile /path/to/certs/*.domain.tld.key SSLCACertificateFile /path/to/certs/*.domain.tld.ca This setup functions normally. If we use the certs installed via Server Admin, which both Server Admin & Keychain Assistant show as valid, they're installed in /etc/certificates/ as follows: -rw-r--r-- 1 root wheel 1655 Apr 9 13:44 *.domain.tld.SOMELONGHASH.cert.pem -rw-r--r-- 1 root wheel 4266 Apr 9 13:44 *.domain.tld.SOMELONGHASH.chain.pem -rw-r----- 1 root certusers 3406 Apr 9 13:44 *.domain.tld.SOMELONGHASH.concat.pem -rw-r----- 1 root certusers 1751 Apr 9 13:44 *.domain.tld.SOMELONGHASH.key.pem And if we replace the aforementioned lines in our httpd-ssl.conf with the following: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem This prompts for the unknown password. I have also tried httpd-ssl.conf configured as follows: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.concat.pem And as: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCACertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem We've verified that the certificate is configured to allow all applications access it (in Keychain Assistant). A diff of the /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem & *.domain.tld.key files shows the former is encrypted and the latter is not, so we're assuming that Server Admin/Keychain Assistant is encrypting them for some reason. I know I can create an unencrypted key file as follows: sudo openssl rsa -in /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem -out /etc/certificates/*.domain.tld.SOMELONGHASH.key.no_password.pem But, I can't do that without entering the password. I thought maybe I could export an unencrypted copy of the key from Keychain Admin, but I'm not seeing such an option (not to mention that the .pem options are greyed out in all export options). Any assistance would be greatly appreciated.

    Read the article

  • How can I prevent an unintentional DDOS running ColdFusion 8 with IIS 6?

    - by Eric Belair
    We had an interesting outage today on one of our client's websites. Out of nowhere, the website was inaccessible. The website runs by itself on a dedicated physical Windows 2000 server (probably overkill, I know, but that's a discussion for a different day). After restarting IIS and ColdFusion Application Service, the problem came back several times. My initial thought was that it was a DNS issue, which happens occasionally - the last time it happened was after Hurricane Sandy when we our ISP was out, and we had to make some network config changes. But, it was not a DNS issue. My second thought was that it was a DDOS attack, but, there's very little reason anyone would want to take this site down. When we called our ISP, the operator on the other end noted that traffic was spiking significantly. As it turned out, the client had unintentionally caused a DDOS on the website, after they FTPed a very large video file, and then mass emailed a link to it. Hundreds of people clicked the link and brought the site to its knees. I am primarily a Website Programmer, but I often have to contribute to server administration at times. Sadly, I'm the resident ColdFusion and IIS expert, but I don't have a lot of experience with this issue. What are some basic steps that I can take to prevent this from happening in the future, since we cannot always control what files the client posts to the website. Here are some ideas I had, but I'm unsure of the impact: Limit the number of connections in IIS. Put media files on a separate server (like an Amazon site, etc.). File requests of this type currently behind a server-script (i.e. /www.site.com/viewFile.cfm?fileId=1424545, where the fileId references a file off the webroot) that logs requests, and pushes the file to the browser using CFCONTENT. I could edit this script to reject requests when they exceed a certain amount in a given time-frame (i.e. a 5MB can be accessed globally 10 times in an hour). This may cause some users frustration, but, if hundreds of users are attempting to view the file, the site is going to crash anyways, as it did today, which is way more frustrating, since there is no "pretty" message explaining why they can't get to the file. I'm open to any suggestions, as I'm continuing my research to report to the CTO with the best options, so that we can put a solution into effect. Thank you.

    Read the article

  • trying to connect mysql with vb.net

    - by user225269
    I've found this at connection strings.com http://connectionstrings.com/mysql Do I need to download connector-net from this site: http://dev.mysql.com/downloads/connector/net/ I recycled the code that I used in connecting vb.net with ms sql: Imports system.data.sqlclient idnum = TextBox1.Text lname = TextBox2.Text fname = TextBox3.Text skul = TextBox4.Text Using sqlcon As New SqlConnection("Server=localhost;Port=3306;Database=testing;Uid=root;Pwd=nitoryolai123$%^;") sqlcon.Open() Dim sqlcom As New SqlCommand() sqlcom.Connection = sqlcon sqlcom.CommandText = "INSERT INTO [student](ID, LASTNAME, FIRSTNAME, SCHOOL) VALUES (@ParameterID, @ParameterLastName, @ParameterFirstName, @ParameterSchool)" sqlcom.Parameters.AddWithValue("@ParameterID", TextBox1.Text) sqlcom.Parameters.AddWithValue("@ParameterLastName", TextBox2.Text) sqlcom.Parameters.AddWithValue("@ParameterFirstName", TextBox3.Text) sqlcom.Parameters.AddWithValue("@ParameterSchool", TextBox4.Text) sqlcom.ExecuteNonQuery() End Using But I get this error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Please help, what solutions would you recommend to this problem?

    Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >