Search Results

Search found 11608 results on 465 pages for 'usb extension'.

Page 326/465 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• ISA bus on newer computers

  - by Kevin Ivarsen

  Are there companies that sell new computers that support old ISA bus expansion cards? We have an aging computer running DOS that operates some machinery via an ISA interface board. Updated versions of this board (e.g. PCI, USB) are not available, and I am concerned about the long-term reliability of the 8+ year old computers we currently keep around as backups. If these newer ISA-capable machines exist, are there any general gotchas to be aware of in terms of compatibility with older expansion boards, ability to run DOS, etc.?

  Read the article

• Is Windows Server 2003 on 96 MB possible?

  - by Nifle

  I have an old laptop, a Pentium II with 96 MB. I have had Windows 2000 on it for ages, it was slow but usable. But now I have to upgrade since I can't get my USB-wlan drivers to install (the old PCMCIA network card broke). I would prefer to install Windows XP but I have no spare licence, but I do have a Windows Server 2003 licence. Do you think it's possible (and usable) to squeeze in 2003 on this computer? Edit: Unfortunately 2003 simply refuses to install on the laptop. It hangs with an error message (paraphrased) 2003 has detected a problem with your computer and has halted the installation to prevent damage. And then some error codes This happens very early in the installation while it's copying the installation files just after I accepted the licence. So I give up for now.

  Read the article

• Extend university wifi network [migrated]

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want? Thank you all

  Read the article

• PDAnet on Android IP on PC is not public IP. Where does the NAT take place, PDAnet or Verizon?

  - by lcbrevard

  When using PDAnet on a PC (Win7 ultimate) to USB tether a Motorola Droid on Verizon 3G the IP address of the PC appears to be public - 64.245.171.115 (64-245-171-115.pools.spcsdns.net) - but connections show as coming from another public IP - 97.14.69.212 (212-sub-97.14.69.myvzw.com). Someone is performing Network Address Translation - either PDAnet or within the Verizon 3G network. Can someone tell me who is doing the NAT? Is it PDAnet or is it at Verizon? Is there any possibility of setting up port forwarding, such that connections to the public IP 97.14.69.212 (212-sub-97.14.69.myvzw.com) are forward to the PC? We are testing a network protocol that requires either a true public IP or forwarding a range of ports from the public Internet to the system on which the software runs (actually Linux hosted by VMware Player or Workstation on a PC running Windows).

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• Roll standalone JBoss app under Tomcat

  - by Seva Alekseyev

  I've got a Linux box where there’s Tomcat running, with some JSP applications in it. Now, I’ve received a third party app from a developer shop to be eventually deployed. It came as an archive called "jboss7.tar" which, it seems, contained a whole standalone Web server. Once I’ve followed their instructions and run the designated shell script, it would start a server that would listen on port 8081, and app pages are being served up. Still, this strikes me as an inelegant setup. Why run two Web servers side by side, both of them Java-enabled? Also, the manual startup of the standalone app, I don't like that either. The real question is – can I take the user-provided portions from the said archive and somehow plug it under the existing Tomcat instance? It looks like the user code is packaged into files with .war extension, I can see them under /var/jboss7/standalone/deployments.

  Read the article

• How to authorize standard users to install drivers

  - by Dr I

  I'm currently looking for a way to autorize my non administrators users to perform an installation of drivers. Here is the speech: All my users are standard users, they got a VirtualBox Hypervisor if they need the administrator rights. But if they put an USB device on the local machine and try to redirect the device to the Virtual Machine, Windows ask for some Administrator rights. I've try to set up those GPO: -Allow standard users to install drivers. -Install WHQL Drivers: Allow Silently. I don't know how to do this.

  Read the article

• How can I disable my laptop's built-in keyboard?

  - by sam

  I have a HP Compaq Presario C700 laptop with Windows 7 installed on it. My laptop's keyboard is not working properly; some keys never work and some keys will keep on pressing. I've formatted the OS but it didn't solve my problem. I bought an external USB keyboard and it works well. As some keys in the built-in keyboard activate themselves, I still couldn't work effectively. After searching Google I tried the following steps to disable the built-in keyboard: Disabled keyboard drivers: This didn't work because when the system reboots, the driver gets installed again automatically. Installed irrelevant driver for keyboard: This failed - I couldn't install the driver. After rebooting it installed the correct driver automatically. Can anyone help explain how I can temporarily uninstall my built-in keyboard? I don't want to remove it manually (removing the hardware cable).

  Read the article

• Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

  - by user26192

  I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

  Read the article

• Enabling openssl With PHP/nginx

  - by reefine

  I'm getting the following error when trying to connect to SMTP + SSL through PHP using nginx + PHP 5, Could not connect to smtp host 'ssl://smtp.gmail.com' (5) (Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP?) In phpinfo I see: OpenSSL support disabled (install ext/openssl) This leads me to believe I've installed OpenSSL incorrectly. I've read a bunch of places where I should uncomment the following line: extension = php_openssl.dll This line does not exist so I added it to the end of my php.ini to no avail. The php_openssl.dll file does not exist anywhere on my server.

  Read the article

• Ubuntu, connecting to WLAN

  - by Holly

  Hello, I successfully installed Ubuntu onto my usb hard drive. However, I'm not sure what the issue is with my internet. I'm not familiar enough with ubuntu to know whether this is a problem with recognizing my wireless card or with my internet, etc. So I suppose my question is, how do I tell whether it's recognizing my wireless card? (Network manager isn't showing any wireless signals, though I wasn't sure if it was supposed to. ) And, if it's not working, how do I go about troubleshooting that issue? Thanks!

  Read the article

• Cannot read/write a second drive in MBP 13

  - by Carlos

  I changed my original HDD for a SDD earlier this year and I just got one more SSD for my MBP 13 (2012) that I used to replace DVD drive. I'm using Mountain Lion. The SSD looks to be recognized allright, but I can't format it. Then I removed the main drive and tried the new one as the main drive and did the boot using a USB drive with MAC OS and everyhing worked as it should (like I just had one drive). However when I bring the first drive back together with the second they both show up but I can't use it. Seems like I have no permission, but when I look at it's properties it says I can read and write to it. Any ideas? Thanks a lot!

  Read the article

• Performance Bottleneck with Photoshop CS3 on XPSP3

  - by Doozer1979

  I have an intel core 2 4400, with 4GB of ram running on XP 32-BIT SP3. Photoshop CS3 becomes sluggish & unresponsive even after loading up small files, and this is with only Bridge open as well, plus McAffee AV. My photos are loaded in from a USB 2 external drive, and my c: drive is used only for programs and windows itself. Even with 4GB of RAM, i am seeing the pagefile increase to 1.6GB, whilst there appears to be 1.5GB of RAM free to use. I've defragged the drive, with defraggler, and after that the only file reported to be fragmented was the pagefile itself. Anyone have any ideas what i can do to improve/solve this?

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

• Windows 7 - cannot access my own external disk

  - by Tomas

  I use Windows 7 Home Premium and external USB disk with NTFS partition. I cannot write-access the my own files on it, even as a member of Admnistrators group! Is there any way how to go around this permission checking, without actually writing some permission information to every folder on it? I have 3 external disks (up to 1TB), and I have thousands hundreds of files on each!!! Doing some permission change, that will actually go recursivelly through all folders on all my disks is plain brain damage!! 1) Is there any way how to change it somehow globally? (like mount options...) .. Or how to go around this annoying permission checking? It was working in Win XP normally! 2) if not, and I must do the recursive operation on all folders, how to do it PERMANENTLY, so that I don't need to do it again on another Windows 7 computer!

  Read the article

• XML and XSD - use element name as replacement of xsi:type for polymorphism

  - by disown

  Taking the W3C vehicle XSD as an example: <schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://cars.example.com/schema" xmlns:target="http://cars.example.com/schema"> <complexType name="Vehicle" abstract="true"/> <complexType name="Car"> <complexContent> <extension base="target:Vehicle"/> ... </complexContent> </complexType> <complexType name="Plane"> <complexContent> <extension base="target:Vehicle"/> <sequence> <element name="wingspan" type="integer"/> </sequence> </complexContent> </complexType> </schema> , and the following definition of 'meansOfTravel': <complexType name="MeansOfTravel"> <complexContent> <sequence> <element name="transport" type="target:Vehicle"/> </sequence> </complexContent> </complexType> <element name="meansOfTravel" type="target:MeansOfTravel"/> With this definition you need to specify the type of your instance using xsi:type, like this: <meansOfTravel> <transport xsi:type="Plane"> <wingspan>3</wingspan> </transport> </meansOfTravel> I would just like to acheive a 'name of type' - 'name of element' mapping so that this could be replaced with just <meansOfTravel> <plane> <wingspan>3</wingspan> </plane> </meansOfTravel> The only way I could do this until now is by making it explicit: <complexType name="MeansOfTravel"> <sequence> <choice> <element name="plane" type="target:Plane"/> <element name="car" type="target:Car"/> </choice> </sequence> </complexType> <element name="meansOfTravel" type="target:MeansOfTravel"/> But this means that I have to list all possible sub-types in the 'MeansOfTravel' complex type. Is there no way of making the XML parser assume that you mean a 'Plane' if you call the element 'plane'? Or do I have to make the choice explicit? I would just like to keep my design DRY - if you have any other suggestions (like groups or so) - i would love to hear them.

  Read the article

• How to sync my PDA (outlook, no wifi) with my Google Calendar?

  - by Peter

  Hey Everybody, We have an old PDA that is not networked (Mio 168). It's main purpose is to serve as an agenda for which we use the outlook that came with it. Now, as my wife usually has the PDA and I want to be able to check and update our agenda too, I'm looking for a way to sync it with Google Calendar by hooking it to my PC via USB. I found a tool to sync outlook with Google Calendar. However, I would need outlook on my PC to be able to use that and I don't have outlook on my PC, nor do I want to buy it just for this sync. So, does anybody here now if and how I can sync my outlook on my PDA with Google Calendar without the go between of a PC version of outlook? Cheers.

  Read the article

• external video card for notebook?

  - by Fuxi

  hi, i'd like to hook an external monitor to my notebook as i need a higher resolution (1680x1050). my notebook supports that resolution (via analog vga out) but the quality is pretty awful - there are blurry horizontal shadows everywhere and tweaking didn't help - seems like the vga out's quality isn't good enough. so i was wondering - does it make sense looking for an external video card? can i also connect a dvi monitor via usb-video-card with optimal quality? my notebook also has pcmcia. any recommendations which i should buy? thx

  Read the article

• Windows 7 boot order and locations

  - by Russ C

  Hi, Long story short, a program that shouldn't have been run on this machine has been, and it's created a naughty .sys file that is being loaded right after pci.sys (as determined by NBTLog.txt) I've had a look a BCDEdit, EasyBCD and a number of Registry keys but I can't seem to determine where about winstart.exe actually gets the list of sys files to load from! The sys file itself is running in high elevation and appears to be defeating all attempts to remove it; I could (probably should) make a Linux USB boot disc and use it to delete the sys file, but I'd really appreciate understanding the mechanics here. ((FWIW: the problem stemmed from a sibling running a Trainer for some game; he has been suitable chastised))

  Read the article

• Can we change control of two keys on keyboard?

  - by mr_eclair

  I'm using Eliteook 8440p hp machine and two keys on my keyboard aren't working v and b. laptop keyboard replace will take 2-3 days, and I can't stop my office work. I'm bored of using On screen keyboard to write v and b. I don't have any portable USb keyoard to connect to laptop right now. I'm thinking I'm not using Pg up and Pg Down button at all, is there any software or trick which can make it possible so that If i press Pg Up it will write v on page and Pg Down will write b. Hoping for quick and positive response.

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• GitHub Not Accessible from Google Chrome

  - by KPthunder

  Whenever I try to go to GitHub through Google Chrome 11 I get the following error message: GitHub works perfectly fine in Firefox 4: This has been going on for a few weeks. This is a fairly new install of Windows (I don't even remember if I've successfully got on to GitHub on this installation with Chrome in the past). I don't even use GitHub for hosting my own code personally, but this has proven annoying in that I can't even access other people's projects through Chrome! Does anybody know what is going on here? An interesting side note: The Sight extension for Chrome doesn't work either! It worked on my old installation of Windows but not on this one. Is my Chrome installation just screwy? I've tried disabling certain other extensions but nothing seems to change.

  Read the article

• Where can I find this HP modular keyboard or similar?

  - by Chaos Whistler

  I'm looking for an HP USB 104-Key Modular Keyboard with Detachable Number Pad (model number is DT530A, I believe), shown at this online store, where it's quite cheap but is sadly sold out. I've searched for hours on Google, and I've found several - the problem is they're Spanish or Greek keyboards but I need one in English (US keys preferred)! I would also be happy with a keyboard which is not exactly this but is similar, either with a detachable keypad or with no keypad at all, as long as the keyboard key layout and positioning is the same as on a standard keyboard. Can you help me find such a keyboard?

  Read the article

• Trying to get MYLDAPAdmin working on Scientific Linux

  - by techsjs2012

  I am trying to get MYLDAPAdmin working on Scientific Linux. I downloaded it and installed it but I am getting the following message. It looks like my PHP is not setup for LDAP. Can someone help me? Missing required extension Your install of PHP appears to be missing LDAP support. Please install LDAP support before using phpLDAPadmin. (Dont forget to restart your web server afterwards) After adding php-ldap.. I am now getting this error Unable to connect to LDAP server dvldap01.uftwf Error: Can't contact LDAP server (-1) for user error Failed to Authenticate to server Invalid Username or Password.

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >