Search Results

Search found 20561 results on 823 pages for 'automate everything'.

Page 327/823 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

  • In Ubuntu, MoBlock makes it take a while to actually start using internet

    - by Matchu
    When connecting to wireless internet in Ubuntu (tested with two different networks), I connect nearly instantly. However, to actually load a page, I need to wait a few minutes, at which point I can actually use a web browser or Pidgin. Until then, various applications try to connect until they time out. I've discovered that, if instead of waiting a few minutes, I open Terminal and run sudo /etc/init.d/blockcontrol stop, everything suddenly is able to load. I can then start MoBlock again with no ill effects. Why is this happening? What is it that would cause MoBlock to take a few minutes to start letting traffic in, but only when started on bootup? Thanks!

    Read the article

  • Keyboard freezes / stuck if a key pressed repeatedly

    - by Aziz Rahmad
    I use Acer 4530. This problem has happened long since Ubuntu 10.10 and now that I use 11.04 dual booted with Linux Mint 10. Everytime I press one key repeatedly, like when I read a long article in a website/ebook or when I play games which required me to press arrow keys repeatedly, it would randomly freeze. That is, whatever I press on keyboard has no effect, and that also happens with touchpad. However, the USB mouse works just fine. I later found out that it's not actually freeze but more like it's like the key stuck. For example when I play tetris which I usually press w (down) button repeatedly, after some times it would freeze. And if I put the cursor in, say, browser's address bar, it would type "wwww....." infinitely. The only way I could fix it is by suspend the laptop, either by using mouse or by closing the lid. And instead of suspended, in that case the laptop would automatically wake up and everything will be fine. (Usually my laptop would wake up after suspended by pressing any key) It has happened since the first time I use Ubuntu, 10.10, and it also happens in Linux Mint 10, and until now in Ubuntu 11.04. It never happened when I use Windows, though. Anyone has ever encounter similar problem? Anyone know how to fix it permanently?

    Read the article

  • Seeking .htaccess help: Converting multiple subdomains (both HTTP and HTTPS) to www.domain.com using .htaccess

    - by Joshua Dorkin
    I've been trying to get an answer to this question on other forums (the folks at SuperUser thought this was the place I needed to post) and via my connections, but I haven't gotten very far. Hopefully you guys can help me find an answer. I've got a dozen old subdomains that have been indexed by Google. These have been indexed as both HTTP AND HTTPS. I've managed to redirect all the subdomains properly, provided they are not HTTPS, but can't get any of the HTTPS subdomains to property redirect. Here's the code I'm using: RewriteCond %{HTTP_HOST} ^subdomain1.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain2.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain3.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] This works great until someone goes to: https://subdomain2.mysite.com$ which is not redirected back to http://www.mysite.com$ How can I get this to work? Additionally, I'm guessing there is an easier way to make it happen than setting up a dozen pairs of RewriteCond/RewriteRule? Is there any way to do this in just a few lines, including one where I list all the subdomains? I'd actually also like to redirect everything on https://www.mysite.com$ to http://www.mysite.com$ except for 3 folders. These are mysite.com/secure, mysite.com/store, mysite.com/user. Is there any good way to add this to the .htaccess file?

    Read the article

  • Why /home folder is missing from my backup archive created by tar?

    - by Konstantin Pereyaslov
    So I'm doing full backup of my VPS using the following command (as root, of course): tar czvf 20120604.tar.gz / Everything seems to be fine, all files seem to appear in the list. The size of archive is 6 Gb and gunzipped version is 11 Gb which includes /home, because I totally have 11 Gb of data on VPS. But when I try actually to unpack archive, or open it using mc or WinRAR, there's no /home folder. And WinRAR tells 20120604.tar.gz - TAR+GZIP archive, unpacked size 894 841 346 bytes. It can't be WinRAR's bug, because when I type tar xzvf 20120604.tar.gz, /home folder isn't unpacked either. Why is /home folder missing from my archive? And what can I do to include it there? tar --version outputs the following: tar (GNU tar) 1.15.1

    Read the article

  • windows 7 losing wired ethernet connection

    - by Brandon Grossutti
    i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

    Read the article

  • windows 7 losing wired ethernet connection

    - by Brandon Grossutti
    i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

    Read the article

  • Can't send emails through sendmail, error occured

    - by skomak
    Hi, I have sendmail MTA and i use pear:Mail class to send mails through remote sendmail server. Everything was fine till yesterday. Probably nothing changes was made in configs. At maillog i can see: May 6 12:58:55 xxx sendmail[25903]: STARTTLS=server, relay=hostxxxx.static.xx.xx.pl [85.x.x.x], version=TLSv1/SSLv3, verify=NO, cipher=DHE-RSA-AES256-SHA, bits=256/256 May 6 12:58:56 xxx sendmail[25903]: o46AwtqE025903: hostxxxx.static.xx.xx.pl [85.x.x.x] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA2 and in /var/log/messages: May 6 13:00:17 lilia sendmail[27193]: realm changed: authentication aborted I use ldap to authenticate users but i used the same script to check mailing on another server and it works there good, only this server behave weird. Packets are deliverd to sendmail server i can see it in tcpdump, but there is smaller packets than on other server which sends emails. Could you tell me how can i check what is wrong with that? D.S.

    Read the article

  • Remap keyboard Ubuntu 12.04; Asus Q500A

    - by hydroxide
    I have an Asus Q500A with win8 and Ubuntu 12.04 64 bit; linux kernel 3.8.0-32-generic. I am using gnome-panel, and xserver-xorg-lts-raring. I have been experiencing problems with the keyboard short-cuts since I had a fresh install. fn+f10 is supposed to mute my system, but instead it will repeatedly press d. fn+f11 is volume down, but it presses c. fn+f12 is volume up, presses b repeatedly. Most of the other on-board short-cuts such as adjusting screen and led brightness work most of the time, but sometimes press other letters repeatedly. Also, sometimes my cntr gets held down for no reason. Everything works fine in windows. I have tried installing all recommends and sudo dpkg-reconfigure -a to reconfigure all packages, which did not solve my problem. I have tried using KeyTouch editor to edit keymaps, navigating to /usr/shar/x11/xkb/keymap when I try opening any of these files it says file contains no keyboard element. I think If I were just able to remap my keyboard it might solve my issues, otherwise if anyone knows where I can get asus drivers for 12.04 please let me know Apparently I didn't have all repositories enabled. I executed the following commands and am trying the updates they give me. Getting linux_kernel 3.8.0-33 generic as well as a bunch of other packages. sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) universe" sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) main universe restricted multiverse" sudo add-apt-repository "deb http://archive.canonical.com/ubuntu $(lsb_release -sc) partner"

    Read the article

  • Is it possible to retrieve lost Windows XP profile information?

    - by Simon Shaw
    I'm running Windows XP Professional on a PC which is less than a year old. About 3 months ago I got an error on boot saying windows could not find my profile. At this point it created a temp one. On this occasion I copied the temp data back into my existing profile and carried on using it. After another month it died again and, once again set me up a temp user. Each time this happens I lose everything related to my profile (desktop, start menu, etc). I ran checks on the hard disk and these suggested nothing was wrong so this seems a software issue not a disk problem. On the advice of my computer manufacturer I am now considering reinstalling Windows but just wanted to check if there's any other ideas for things I might be able to try. Any suggestions for what could be causing the problem would also be gladly appreciated.

    Read the article

  • Import a puppet manifest from the node itself?

    - by bobinabottle
    I have a somewhat unique situation. Our systems team manages our main puppet master, and the development team is fine with everything however they are thinking of using it to control some elements on their desktop machines, whilst still being connected to our central puppet master. Since we don't want the changes they make to go into our puppet master.. is there a way of puppet importing a manifest from the node directly? As in.. on the developer machine, they put a file "/root/development.pp" or something, and then on our puppet master we put something like node { "developermachine": # Do the majority of normal things # import "/root/development.pp" } We have a few different options we can take about security of write access to the puppet manifests, but if puppet were to support something like this it would probably be the cleanest for us. Any help is appreciated :)

    Read the article

  • Sound from both speakers and headphones with SoundMAX ADI AD1986A on Windows 7: possible?

    - by oKtosiTe
    My ASUS A8N-VM CSM motherboard has an on-board sound chip–the SoundMAX ADI AD1986A. Although sound does work reliably on Windows 7, I was a bit disappointed that neither ASUS nor the manufacturer of the sound chip offer drivers for it for Windows 7 (or Vista for that matter). Among other things jack detection, output to front and read jack simultaneously and surround sound are no longer available using Microsoft's default HD Audio driver under Windows 7. Under Windows XP and several Linux distributions (Arch, Gentoo and Ubuntu) that I've tried everything works as it should. Since I switch between headphones and speakers quite often, this annoyance begs me to ask: aside from buying a sound card, is there any way to get sound from both outputs at the same time?

    Read the article

  • Process ANSI escape codes before piping

    - by Tiddo
    I'm trying to pipe the output of a script (Mocha) to another script. However there is one problem: Mocha generates quite a few ansi escape characters to update the screen on the fly. These characters are also send through the pipe. Is there a way to process the ansi sequence such that the output is the same as the final output to the screen? I do want to keep color escape sequences, but not the curser movement escapes. Edit: I have a partial solution now (for Mocha only): so far it seems that Mocha with the spec output (the one I use) only generates color ecape characters and the CSI 0G escape sequence. The CSI 0G escape character means that the cursor should move back to the beginning of the line. Mocha uses this to overwrite a line completely. Therefore you could simply create a sed regexp which will delete everything up to that escape sequence on a line: sed 's/^.*\x1b\[0G//g'. I am still looking for the complete solution though.

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • Remote host: can tracert, can telnet, can*not* browse: what gives?

    - by MacThePenguin
    One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

    Read the article

  • Local Live Quicktime Video Broadcast, latency?

    - by Snowwire
    I'm looking into the feasibility of using a local server to distribute live video of a conference to delegates in the same room. They would still hear the live audio coming from the speaker, so only the video would be streamed. I was considering a Darwin Steaming Server (a lot of iPhone users to support) and encoding with H.264. My main concern is latency across the network. Even with everything running locally, would there be lip sync issues between the live audio and the 'live' video stream? It feels like there will be problems given the encoding, broadcasting, decoding to be completed, but I've never done any like this before so thought I would check. Thanks

    Read the article

  • Anti-spam measures for websites

    - by acidzombie24
    What are anti-spam measure I should consider before launching my user content website? Some things I have considered: Silent JavaScript based CAPTCHA on the register page (I do not have an implementation) Validate emails by forcing a confirmation link/number Allow X amount of comments per 10 minutes and Y per 2 hours (I am considering excited first time users who want to experience the site) Disallow link until user is trusted (I am not sure how a user will become trusted) Run all comments, messages, etc. through a spam filter. Check to see if messages are duplicate or similar (I may not bother with this. I'd like the system to be strong without this) I also timestamp everything which I then can retrieve as a long on my administrator page. What other measures can I take or consider?

    Read the article

  • Unable to open Infopath2007 files in Outlook 2010

    - by Amy
    Our company recently began upgrading selected users to Outlook 2010, however we all still remain on Infopath 2007. Everything seems to be working fine for our users going from Infopath 2007 to Outlook 10. Where we are running into the problem is for our users who are on Outlook 10 talking to other users that are also on Outlook 10. When any user opens an Infopath file from a shared site, completes and submits it, and then choses to reply to it, our Outlook 10 folks can not open the emails. They pop open for just a second and close down. It also appears in their email list with a different icon. Any ideas on how to get our Outlook 2010 users to see all of their infopath emails?

    Read the article

  • You may be attempting to write into another users folder which is not supported...

    - by Triynko
    Why do I get this message when trying to compile a file in Flash MX 2004? "If you are logged in with a limited user account, then you may be attempting to write into another users folder which is not supported." The folder and files are owned by the Administrators group; however, the user trying to modify the files is a member of a group which is inheriting permissions to have full control over the files, except take ownership and change permissions. Why would a user, whose effective permissions include virtually everything, be unable to write to a file... and end up getting an error message like the one described?

    Read the article

  • Delivering Oracle DBaaS: Journey to Enterprise Cloud with Oracle Database 12c

    - by B R Clouse
    The release of Oracle Database 12c  is accompanied by extensive supporting collateral that details the new features and options of this major release.  But with so much to read and investigate, where to start?  If you don't have the time to pore through everything, then you may wish organize your reading in terms of the use case you're most interested in.  If your interest is Database as a Service in private database clouds then may I suggest that you start here: Accelerate the Journey to Enterprise Cloud with Oracle Database 12c Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This paper describes the phases of the journey to enterprise cloud, and enumerates the new features and options in Oracle Database 12c that support each phase.  Oracle Multitenant figures prominently, but it's not the only cloud-enabling topic: Oracle Database Quality of Service Management, Application Continuity, Automatic Data Optimization, Global Data Services and Active Data Guard Far Sync all deliver key benefits for delivering database as a service.  Further reading and research is suggested by the references included in the paper. Happy clouding!

    Read the article

  • Simultaneous read/write to RAID array slows server to a crawl

    - by Jeff Leyser
    Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

    Read the article

  • VFS: file-max limit 1231582 reached

    - by Rick Koshi
    I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

    Read the article

  • Server not sending a SYN/ACK packet in response to a SYN packet

    - by jeff
    Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

    Read the article

  • Can't install Windows 7 on Acer Aspire M1100

    - by r0ca
    When I install Windows 7, everything goes smooth but as soon as it's done and Windows needs to reboot for the last time before getting the desktop, the computer stucks to Verify DMI Pool Data............. and then, nothing. I change the CMOS battery, I tried so many setup in BIOS, even load default settings... Nothing worked. The HDD light is not flickering anymore, no HDD activity. CTRL-ALT-DEL doesn't work. It's just impossible to load Windows 7. I tried Windows XP and this works fine. I also tried the Acer (Futureshop) recovery CD and I get an Hexademical error message stating the install cannot continue. Is there a BIOS flash apps somewhere or a fix I can apply to have Windows 7 Ultimate installed on my computer. Any takers?

    Read the article

  • phpmyadmin forbidden after changing config for my IP

    - by Jonathan Kushner
    I followed the phpmyadmin setup and changed the config to require ip my ipaddress and allow from my ipaddress and its still telling me forbidden You don't have permission to access /phpmyadmin on this server. when I try to access the page on my browser (my server is not located on my machine). I installed everything using root. I also chmod 775 the entire phpMyAdmin folder. Im running RHEL 6.1. Any idea what to do at this point? Here is my /etc/httpd/conf.d/phpMyAdmin.conf: <Directory /usr/share/phpMyAdmin/> <IfModule mod_authz_core.c> # Apache 2.4 <RequireAny> Require ip myserveripaddress Require ip ::1 </RequireAny> </IfModule> <IfModule !mod_authz_core.c> # Apache 2.2 Order Deny,Allow Deny from All Allow from myserveripaddress Allow from ::1 </IfModule> </Directory>

    Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >