Search Results

Search found 12365 results on 495 pages for 'core audio'.

Page 328/495 | < Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >

• What could cause Vista machines to degrade in performance?

  - by gencha

  We have installed several machines running Windows Vista at a client site. These machines run the same set of applications each day and are not operated with by any user. They mainly run a 3D application for digital signage purposes. After a few months I noticed that several machines suffer from really bad stuttering. The performance is unacceptable. At first I figured it was faulty hardware. But after putting a fresh image on them, they run perfectly fine again. These are Core i7 machines with GTX 280 graphics adapters. They should be able to handle the workload without any trouble (and they do, at least for a while). I really have no idea how to track down the source of this issue. Especially since not all of the machines display the same issue.

  Read the article

• nVidia Control Panel Won't Recognize SLI

  - by Nakaan

  So yesterday I bought a brand new, 1,000W PSU to replace my 650W one and to allow for SLI. I install it and my second card (both are GTX 560 ti cards). I reinstalled my drivers and my system recognizes both cards. The control panel says "GTX 560 ti x2", I can select between them for Physx, sound output, picture output (although I only have one hooked up to my monitor), etc. But the kicker is I can't turn on SLI. Everything I've read says I'll get a balloon notification saying I can use SLI and the control panel will have a new section, etc, but none of those things happens. Anyone have any ideas? System: Win7 Professional x64 2x GTX 560 ti 3.1 GHz Intel Core i5 1,000W Xion PSU 8GB RAM (Can't think of my motherboard right now) Note: My PSU and MOBO both say they're SLI certified and I'm using an SLI bridge. Edit: Formatting changes

  Read the article

• Multi Monitor setup goes crazy after locking/unlocking Vista machine

  - by Farseeker

  Give me a 10-blade quad-processor quad-core Opteron centre and ask me to configure failover/load balancing and I'd be happy to, but the following problem has got me completely stumped. My Vista Business Professional machine, running Ultramon, has three monitors attached. When I lock the machine (to go to the delicious cafe around the corner), the monitor layout stays correct. When I unlock it, I watch as all my screens flicker (as they are being re-configured), and Vista chooses some crazy layout for the monitors. The most recent one is below, but it's never consistant. Any ideas what might cause this? It's Vista Business, with UltraMon 3.0 (exiting Ultramon makes no difference).

  Read the article

• MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• Preparing Automatic Repair appears out of nowhere & takes forever?

  - by Jörg B.

  I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

  Read the article

• sony vaio laptop - product cycles

  - by Max

  I am interested in buying a sony vaio z series laptop. But I found out that it was already released in january 2010 and doesnt have quad core cpus available. I guess there is a product update due in 2011? Has anyone knowledge of how the product cycles are with sony laptops? E. g. I know that apple updates its macbook pro series somewhat every 9 - 12 months. Is this around the same with sony? I am also wondering if the ssd drives sony uses are any good, but that could be another question...

  Read the article

• 1000 HZ linux kernel necessary if I have tickless and high resolution timer?

  - by Bob

  I am trying to improve performance on my server. I have a few processes that need low jitter (less than 10ms variance). I have a load average of 4 maximum on an i7-920 (4 physical cores, 8 with HT). There are about 10 processes ranging from 40% to 90% of a core user mode. System usage is 3% total. Total CPU usage is 80% max. Will setting the kernel from 100hz to 1000hz improve the jitter if tickless and high resolution timers are already set? This page seems to indicate it still does something. https://lkml.org/lkml/2009/4/28/401 How about changing from voluntary (PREEMPT_VOLUNTARY) to preemptible (PREEMPT)?

  Read the article

• Will this increase my VPS failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange install Team foundation server on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler for this about one VPS can only install what what what service ? Thx for reply

  Read the article

• Could it be sane to use Windows Server 2012 as desktop

  - by nCdy

  what about using it on desktop? I've got enough strong PC with intel core i7 and 8GB Ram so what should I think about: why not? Were looking about major differences compared to windows 8, found less. for example new file system - can it affect me? In my usual day I need development instruments alike visual studio, virtualization tools, and some games So far I can't find something that must stop me, everything I need can work (seems like) there. Tell me why I must not do it or if that is sane to do.

  Read the article

• CodeIgniter's Scaffolding not working

  - by 01010011

  Hi, I keep getting a 404 Page Not Found whenever I try to access CodeIgniter's Scaffolding page in my browser, like so: localhost/codeignitor/index.php/blog/scaffolding/mysecretword I can access localhost/codeignitor/index.php/blog just fine. I followed CodeIgnitor's instructions in their "Create a blog in 20 minutes" by storing my database settings in the database.php file; and automatically connecting to the database by inserting "database" in the core array of the autoload.php; and I've added both parent::Controller(); and $this-load-scaffolding('myTableName') to blog's constructor. It still gives me this 404. Any suggestions?

  Read the article

• Change Windows Server 2012 color scheme without Desktop Experience feature

  - by Fez Vrasta

  I have a Windows Server 2012, blue is nice... but I'd prefer a less "eyes puncher" color, maybe gray or black... I'm a GNU/Linux sysadmin and just the fact of have the entire GUI on a server is difficult for me, so I would avoid to install the Desktop Experience feature just to change the color of the GUI. I have read here: How to change color scheme in Windows Server 2012 That once I've changed color I may remove the Desktop Experience feature and the color will not be reverted to the original. So I guess there must be a way to change the color without install this feature pack, because looks like it just adds the control panel to set the color, but not the core feature, that maybe could be accessible within some registry key. Does someone have some idea?

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• SQL Server 2008 R2 100% availability

  - by Mark Henderson

  Is there any way to provide 100% uptime on SQL Server 2008 R2? From my experience, the downtimes for the different replication methods are: Log Shipping: Lots (for DR only) Mirroring w. NLB: ~ 45 seconds Clustering: ~ 5-15 seconds And all of these solutions involve all of the connections being dropped from the source, so if the downtime is too long or the app's gateway doesn't support reconnection in the middle of task, then you're out of luck. The only way I can think to get around this is to abstract the clustering a level (by virtualising and then enabling VMWare FT. Yuck. Good luck getting this to work on a quad-socket, 32-core system anyway.). Is there any other way of providing 100% uptime of SQL Server?

  Read the article

• How to automaticaly mount luks-partition only when disk is plugged in

  - by Frederick Roth

  I have the following scenario: I want to automatically backup some data from my Laptop(Fedora Core 17) to a external encrypted(luks) hard disk. The disk can be opened by a key file, which lies on the also encrypted root partition of my laptop. The hard disk is attached to my docking station and therefore only "present" when I am at home (which is approximately 1/2 of the time the Laptop runs) I have everything set up the way I want it with one exception. I don't get a decent way to mount the hard disk automatically at boot if and only if it is present. If I add it to crypttab and fstab without noauto it tries to mount it at boot and takes a lot(!) of time and error messages when it is not present. If I add noauto, well it does not mount automatically ;) Is there a way to configure luks/crypttab to do the following: check whether the disk is present if yes: decrypt/mount if no: just don't

  Read the article

• Most suitable high availability solution

  - by Alex Bagnolini

  My company is hosting a website in a server with IIS, SQL Server and a 3rd party windows service (written in C#, source code available for amendments). We bought a new identical server, composed by: 1x Quad Core, 12GB RAM, 4x160GB SATA Raid 5, Windows Server 2008 R2 Datacenter, Public IP. We aim to put all webpages and the 3rd party windows service in an high-availability state. After some lab-testing on how to configure Failover Clustering and Hyper-V, we have deep doubts on what the "best" solution would be, by "best" meaning maintainable and able to correctly handle a physical server failure. Any suggestion on how we should configure the two servers? We don't need all the configuration's step, just an hint on the right direction to follow.

  Read the article

• setting up/installing/configuring nginx LEMP stack on fresh VPS server

  - by Grant Tailor

  I need some help in settingup/installing and configuring nginx LEMP stack on a fresh new VPS I have. The specs of the CentOS 5.7 VPS are 2GB DDR3 ECC RAM(4GB burst), 1 core 1.5Ghz(3Ghz burst) and 100GB RAID 10 storage, unmetered bandwidth @ 100Mpbs all for a whopping $25/month(unbeatable, yeah I know :) Anyways I have followed this LEMP (will also need MySQL and PHP) stack guide on linode http://library.linode.com/lemp-guides/centos-5 but basically what I want is to be able to host multiple website on this webserver after everything is setup. I am used to using DirectAdmin control panel on other server and want to have things setup so I can host multiple websites - mostly wordpress and drupal themes. Lets say 10 websites on this nginx web server. So can someone please help me on what I need to do to take "full" advantage of nginx power and performance, while been able to easily manage these multiple websites (wordpress and drupal themes)?

  Read the article

• Enable Hardware Virtualization on HP CompaqDX2420?

  - by 7alwagy

  Hey Guys, After installing vmware7, I tried to run a virtual machine with Mac OSX installed. When I tried to run this virtual machine I got an error message saying: Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization. I'v googled and found out that my processor (Intel Core 2 Duo E7500 Processor (2.93 GHz, 3 MB L2 cache, 1066 Mhz FSB)supports Hardware virtualization. Does anyone know how to enable this in order to get this virtual machine running?

  Read the article

• JBoss thrown error looking up local address when starting

  - by Jeeba

  Hello im installing a fresh Jboss 5.1 in a Centos 5.5 machine. I dont have Apache installed. So when I try to start jboss using the comand ./run.sh I get the following error 15:13:57,414 INFO [JMXKernel] Legacy JMX core initialized 15:14:03,856 ERROR [ServerInfo] Error looking up local address java.net.UnknownHostException: dhcppc1: dhcppc1 at java.net.InetAddress.getLocalHost(InetAddress.java:1354) at org.jboss.system.server.ServerInfo.getHostAddress(ServerInfo.java:364) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) .... After that i can run Jboss only from 127.0.0.1:8080 but using localhost:8080 doesnt work. I think its a centos configuration problem but im a total newbye managing ports and maybe firewalls, so what do you think could be the problem?

  Read the article

• Physically moving a hard drive from older iMac (c2d) to new iMac (i7) ?

  - by Inshim

  Instead of my usual habit of using superduper to mirror my drive to a new computer, I just physically moved the hard drive from an older iMac to a new one. But... it now doesn't boot, getting stuck at the apple logo screen. Since the hard drive that came with the new iMac works well, and my old drive works well when I return it to the older iMac, I conclude that there is some problem at the system/kernel level due to the different hardware. In the past I did similar things (e.g. starting a C2D machine from a Core Duo in target disk mode), so perhaps the change in architecture to the i5/i7 is too problematic? The main point: do you know of any way to get the system to rebuild for itself the proper versions of the system components when booting? Are there certain directories that I can safely delete to make that happen? Thanks

  Read the article

• UEFI - Linux Mint Boot from USB Doesn't work

  - by Joe Bennett

  I'm running Linux Mint (only OS other than in VirtualBox) and wanting to remove it. I've created a Live USB of Windows 8 using Windows 7 USB/DVD Download Tool - Yes, I know it says Windows 7 but I've been doing research and I am hearing from everywhere that it also works for Windows 8. The ISO was loaded on just fine (AFAIK) Computer came with Windows 8 pre-installed I have Safe boot and Fast boot disabled in the BIOS Settings I have USB as my first boot option I have tried both the USB 2.0 and 3.0 ports Yet, Mint is all that will boot up. Anybody have a similar issue? If it helps, the computer is a Toshiba Satellite S855D Laptop with an AMD APU quad-core processor (3 CPU, 1 GPU)

  Read the article

• Firefox 4 is displaying all text as "bold"

  - by Mateo

  I installed Firefox 4 this morning excited to checkout some of the new HTML 5 features that have been implemented and found that all text was displayed in a bold font. Here is the comparison with what Firefox 4 is displaying on my machine and Chrome. It is getting really annoying. So far I've... Emptied the cache/history/etc. Re-installed the various core fonts (Arial, Courier, Times New Roman, etc.) Checked the font defaults in FF4. The interesting part to me is that I had FF3.6x on this machine with no problems whatsoever and now this. Any ideas? System Description Windows 7 (x64) Update I just found out that this is happening in IE9 (final) as well. Must be something with the system fonts. Like I said before, this wasn't happening pre-FF4.

  Read the article

• Roughly cutting Fibre Cables

  - by Bryan

  I recently asked a question about which type of Fibre optic cable to use for my installation. We have now found a cable type and supplier and I'm about to order the cable (OM3, Tight Buffered, 12 Core), however I have a further question: We are shortly moving in to a new building (still being constructed) and we are about to get a window in which we will be able to run any cabling that we need. How should I roughly cut the fibre? Can I just use some heavy shears to cut through the cable? I'm aware that doing so will damage the ends, but will the damage be limited to the ends, or could the cracks/fractures continue up the length of the cable? p.s. I have already allowed for several metres of extra cable at each end, and I am going to get a specialist in to terminate the fibres.

  Read the article

• how insecure is my short password really?

  - by rika-uehara

  Using systems like TrueCrypt, when I have to define a new password I am often informed that using a short password is insecure and "very easy" to break by brute-force. I always use passwords of 8 characters in length, which are not based on dictionary words, which consists of characters from the set A-Z, a-z, 0-9 I.e. I use password like sDvE98f1 How easy is it to crack such a password by brute-force? I.e. how fast. I know it heavily depends on the hardware but maybe someone could give me an estimate how long it would take to do this on a dual core with 2GHZ or whatever to have a frame of reference for the hardware. To briute-force attack such a password one needs not only to cycle through all combinations but also try to de-crypt with each guessed password which also needs some time. Also, is there some software to brute-force hack truecrypt because I want to try to brute-force crack my own passsword to see how long it takes if it is really that "very easy".

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• Proper way to re-image Windows 7?

  - by Alec

  I had a driver completely fail on me so I have to restore my computer from a system image backup. I used an installation DVD to run the Re-Image utility on there, but after 8 hours of "preparing the image" to be restored, it began restoring to my hard drive. After 12 hours there, it was 5-8% complete. I figured I must have done something wrong or it started doing something wrong. So I installed a fresh copy of Win-7 and ran the utility from there. It's going at the same snail's pace. I still think I must be doing something incorrectly - I don't see how it could possibly take so long, I could probably manually flip the on my hard drive and be done before that utility. Am I doing this correctly or is there something else I should be doing? Edit: In case my hardware is relevant: Win 7 64 bit Core i7 8 GB Ram 640GB Internal 1TB External connected via eSATA I had approximately 400GB of data on my computer before it crashed.

  Read the article

< Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >