Search Results

Search found 18766 results on 751 pages for 'me again'.

Page 329/751 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• Is HDCP working for ATI/AMD cards on windows 8?

  - by Joel Barsotti

  I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

  Read the article

• Operating System Not Found - BIOS recognizes, Live OS doesn't (Laptop)

  - by Klaus Borges

  Here's the deal: I have a multi-partitioned hard drive on my laptop set up with GRUB. I got a blue-screen while working on Windows 7 and when rebooting I got the Operating System Not Found error message. I rebooted the computer once again and entered the BIOS setup just to see if recognized my HDD - it did. Next step for me was booting a Live CD and seeing if I could repair GRUB or at least check if something changed on the partitions, but it doesn't seem to recognize anything there. Tried blkid, fdisk -l, not even GParted can see it. What should I do?

  Read the article

• Can't Log Into Ubuntu 12.04

  - by Razick

  Yesterday, after turning on Ubuntu, I logged into a Gnome session. A few minutes later, I tried switching to Unity for a change. Unfortunately, the background and my desktop icons loaded, but the system bar and launcher failed to load even after several minutes. Unity had always worked fine for me. I then tried the guest account, and it worked fine on both Unity and Gnome. However, the problem with my account got worse; I couldn't log into any desktop at all anymore. I would type in my password and press enter and it would just sit there doing nothing. The computer no longer responded in any way, so I had to hold the power button and reboot. The same problem happened repeatedly. Earlier today, I tried to get on again. I found that I hadthe same problem, when I tried to log in, the computer no longer locked up, but instead flashed a black screen with theconsole output and what seemed to be an error message before returning to the log in screen. It was to quick for me to read, about 1/4-1/2 second. I'd really appreciate some help as I have some important files that are not backed up yet. I can't transfer the files to a new account, or even make a new account because I tried taking the password off my account so now I can't authenticate from the guest to perform root functions. I'd really appreciate some help as I have some important files that are not backed up yet. Thanks.

  Read the article

• Web Crawler for Learnign Topics on Wikipedia

  - by Chris Okyen

  When I want to learn a vast topic on wikipedia, I don't know where to start. For instance say I want to learn about Binary Stars, I then have to know other things linked on that pages and linked pages on all the linked pages and so on for the specified number of levels. I want to write a web crawler like HTTracker or something similiar, that will display a heiarchy of the links on a certain page and the links on those linked pages.I wish to use as much prewritten code as possible. Here is an example: Pretending we are bending the rules by grabing links from only the first sentence of each pages The example archives and "processes" two levels deep The page is Ternary operation The First Level In mathematics a ternary operation is an N-ary operation The Second Level Under Mathmatics: Mathematics (from Greek µ???µa máthema, “knowledge, study, learning”) is the abstract study of topics encompassing quantity, structure, space, change and others; it has no generally accepted definition. Under N-ary In logic,mathematics, and computer science, the arity i/'ær?ti/ of a function or operation is the number of arguments or operands that the function takes Under Operation In its simplest meaning in mathematics and logic, an operation is an action or procedure which produces a new value from one or more input values ------------------------------------------------------------------------- I need some way to determine what oder to approach all these wiki pages to learn the concept ( in this case ternary operations )... Following along with this exmpakle, one way to show the path to read would a printout flowout like so: This shows that the first sentence of the Mathematics page doesn't link to the first sentence of pages linked on ternary page two levels deep. (Please tell me how I should explain this ) --- In otherwords, the child node of the top pages first sentence, ternary_operation, does not have any child nodes that reference the children of the top pages other children nodes- N-ary and operation. Thus it is safe to read this first. Since N-ary has a link to operations we shoudl read the operation page second and finally read the N-ary page last. Again, I wish to use as much prewritten code as possible, and was wondering what language to use and what would be the simpliest way to go about doing this if there isn't already somethign out there? Thank You!

  Read the article

• WiFi slow sometimes, reboot helps, how do I debug it?

  - by January

  Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

  Read the article

• What should I recommend a small company looking for C# developers

  - by Coder

  Here is the issue. I am a senior developer, and one of the start-ups I designed the system (management system/database/web) a long time ago, have grown and need software updates. I have left their system to another developer long time ago, but apparently he has left the job, and so they are asking me if I can suggest them where to find a new one. The problem is that the company has no clue that the IT is not cheap. They expect multiple features to be added for 40$, so that's an issue. Actually one of the reasons why I left the project when I did. Lots of expectations, little pay, also I know those people outside work, so I decided to avoided stressing the nonwork-relationships and left the project gracefully. Today they asked me for an advice, and I told them that the feature list they want is probably going to cost some if they'll get a senior developer for the job. So I guess their best bet is to find someone who loves coding and has just finished the school. Which would give someone a chance to code for money which is good for a student, and at the same time, allow the student to get some hands on experience. Then again, the system is not exactly 20 line console program, there is an MSSQL database, ASP.NET web page and content management system with all the AJAX stuff and some other things. So student straight out of school could have some problems with that. But, I thought about the issue some more, and I think that junior developer is a tricky deal, without mentoring, he can either screw up royally, or just do what's asked. Also, it seems no one is coming to interviews at all, which is weird, or maybe not. What should I suggest them?

  Read the article

• Windows Server Configuration Management Best Practices

  - by Anton Gogolev

  Chef/Pupper/Ansible are cool and all, but they are second-class citizens on Windows at best. We have a bunch of "snowflake" (one of a kind) machines (baremetal and virtual) that nobody really know what's going on with. What I want is to start establishing basic configuration management for said servers, starting from installing Windows, installing and enabling various Roles and Features, setting up Services, Shares, Users and deploying webapps. PowerShell DSC looks promising, but it's not yet here and appears to be over-engineered, Puppet and the like are again not first-class. There's a bunch of tooks and TLAs like Windows ADK, DISM, OCSetup, etc. and it seems to me that the "Configuration Management" story on Windows is not precisely rainbows and unicorns. What I want is a Puppet/Chef-like, lightweight tool (no System Center Configuration Management, please) which would allow us to "version-control our server infrastructure" and bring all the benefits of CM. So, where do I look for the tool that does this kind of thing?

  Read the article

• SSH Access Denied despite correct credentials being used

  - by columbo

  Hello, I have a remote CentOS server to which I had SSH access to. Today when I try to log in via SSH I just get Access Denied even though I am using the correct credentials. I have plesk 9 access and so have reset the admin password and tried to SSH using that password but to no avail. I even created a new user with SSH access rights and tried to log in as them but again failed with the same access denied. I have rebooted. Can anyone offer any advice? There is no file manager in plesk other than for the web domains so I can't get at any system files to see what is going on. Any advice appreciated.

  Read the article

• Problem with usb wireless mouse

  - by aiacet

  Recently I have started having problems with my wireless mouse (Wireless Optical Mouse MI-4910D). Sometimes when I start my PC or during a game the pointer/arrow stops moving. When the PC boots the pointer is locked in the center of the screen. If I'm lucky it helps to change the USB wireless adapter from port 1 to port 2 but sometimes this trick doesn't work and I have to restart my PC to get the mouse to work again. Like you can see in the product web page this mouse don't have a driver but only a tool to solve some problems. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

  Read the article

• Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010

  - by mbcrump

  After you download and install the January 2011 Windows Phone update, you will notice one annoying thing. The default deployment target for Windows Phone Projects in Visual Studio changes to Windows Phone 7 Device. Before the update, it defaulted to the Emulator. I found this extremely annoying as I’m more than likely going to test with the emulator before putting it on my actual device. Now to make things fair, Microsoft told you they were going to switch the default and even provided a solution, but you will have to check a tiny paragraph in the release notes. The good news is that its very easy to do: Simply navigate out to : %LocalAppData%\Microsoft\Phone Tools\CoreCon See the folder named, “10.0”? Go ahead and delete it. Now, the folder will be completely empty and if you fire up Visual Studio 2010 you will see we are now defaulting to the Emulator again. In my opinion, this should have been left at Emulator. Now, new WP7 developers will get a build error when they first start a WP7 project and will not know why until they read the error list.  Subscribe to my feed CodeProject

  Read the article

• Smoothing rotation

  - by Lewis

  I've spent the last three days trying to work out how to rotate a sprite smoothly depending on the velocity.x value of the sprite. I'm using this: float Proportion = 9.5; float maxDiff = 200; float rotation = fmaxf(fminf(playerVelocity.x * Proportion, maxDiff), -maxDiff); player.rotation = rotation; The behaviour is what I required but if the velocity changes rapidly then it will look like the sprite will jump to face left or jump to face right. I'll go into the behaviour in a little more detail: 0 velocity = sprite faces forwards negative velocity = sprite faces left depending on value. positive velocity = sprite faces right (higher velocity the more it faces right) same as above. I've read about using interpolation rather than an absolute angle to rotate it to but I don't know how to implement that. I have a physics engine available. There is one other way to get around this: to use += on the rotation angle. The thing is that I would then have to change the equation to produce positive and negative values then to make sure the sprite faces 0 once it reaches 0 velocity again. If I add that in now, it keeps the previous angle even after the velocity has dropped / is dropping. Any ideas/code snippets would be greatly appreciated.

  Read the article

• How can I play 24Bit 96000Hz vinyl rips?

  - by Peter

  I am getting music through the Nvidia HDMI but it is all down-sampled to 44000Hz. I have spent at least 3 hours searching for an answer yesterday. I use Pulse Volume and I even changed the default settings in the Pulse folder to 96000 but it does not work. Though 5.1 sound works perfectly. They all work well in Windows 7, but I prefer to use Ubuntu. All the config files for all the programs are in the etc folder, then look in the pulse folder, and there are 3 three files, 2 of these I changed the permissions and I changed 16 and 44000 to 24 and 96000 as I had read in another forum, but it worked for them and not for me. Though 5.1 works as I have special mp4 file that can check each channel. I did alot of restarts and checking after these changes as nothing had happened, my amp tells me the freq of the signal, which does work which I have tested on Windows 7. I have also gone to systems to download the latest driver for mu Nvidia card. But even if it does not work, I guess I can always play Cd's. But I think my player have become more unstable since I changed the configs, so I may uninstall and install Pulse Volume Control again.

  Read the article

• The 'which' command returns nothing via cron, but works via console

  - by Zárate

  Hi there, I've written a little utility in haXe + Neko that needs to execute some GIT commands. To avoid hardcoding the path to the GIT executable I'd like to use the which command to find out where it is. Everything works as expected when running manually from the console, but not when the the app runs on a cron job. I'm aware of the restricted environment (here or here) when you run a script using cron, but still surprised this doesn't work: /usr/bin/which git >> /home/user/git.txt The text file is created but the content is empty. Again, when run from the console it works as expected. Any ideas? I'm running OS X Leopard, if that helps. Thanks : ) Juan

  Read the article

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• Kindle for PC - page loading problems

  - by Andrew Heath

  When viewing books in Kindle for PC, often going to the next page will change the line count at the bottom of the screen but not refresh the page view. Then, if you hit next again, you end up on the next next page (+2 rather than +1). This happens to me going backwards as well. Using arrow keys, or mouse clicks, or page down/up all creates this error. There doesn't seem to be any pattern to the occurrence other than "frequently". It happens on my Win7 64 bit and Win XP machines. I've only one Kindle book at the moment, PHP Object-Oriented Solutions by David Powers, so I suppose it could be a problem specific to that book. Does anyone else have this issue? It is extremely irritating to be constantly flipping back and forth just to get the page view to show the proper page.

  Read the article

• Install wireless router with cable modem - need authentication server?

  - by Paul

  I've bought a wireless router which I'm installing with a Telstra BigPond cable modem for a friend. As part of the setup I've got to a screen requesting username / password / authentication server for the cable modem They have contacted Telstra who supply the username / password and say that is all they need. They dont know anything about an authentication server. There are a couple of answers up on Whirlpool forum found through google but those answers are 4 years old. http://forums.whirlpool.net.au/forum-replies-archive.cfm/475258.html http://forums.whirlpool.net.au/forum-replies-archive.cfm/479615.html I havent tried them yet as I hoped to get actual answers before trundling over to my friends house again. Can anyone suggest, How to get information from Telstra support? (I realise this question maybe impossible to answer) What is the authentication server for Telstra BigPond for a user in Sydney Australia Are those whirlpool forum answers still valid? I guess if I dont get anything more here I'll try what it says on whirlpool and see what happens.

  Read the article

• A Big Congrats to Hitachi- Now a Diamond Level Partner!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} We’ve said this before and we’ll say it again, nothing sparkles quite like a diamond. Being named Diamond level partner is the highest ranking available in the Oracle PartnerNetwork Specialized program, and we could not be more excited to congratulate Hitachi, Ltd on their new glistening title! Hitachi has helped clients maximize the business benefits of their Oracle Applications for more than two decades, while also helping them bring their business visions to life through industry led services and solutions. Not only has Hitachi achieved Diamond level status, they also have 29 additional Oracle Specializations! Here at OPN we know that it all starts with equipping our partners with the proper tools to help their end customers succeed, and we truly believe that diamonds partners are forever! So here’s to you Hitachi, our diamond in the ruff! Shine On, The OPN Communications Team

  Read the article

• RAM module randomly stopped working

  - by nhinkle

  My laptop is a Dell Inspiron e1505. It came with 2x512 MB of RAM installed, and about a year and a half ago I decided to upgrade it to 2x1 GB. I bought two 1GB memory modules from newegg and installed them, and all worked fine. Just last night my laptop was working fine; this morning I booted up and there was a BIOS warning saying "amount of system memory has changed". I tried reseating the modules, but that didn't fix it. Then I removed each one individually, and determined that one of the sticks appears to no longer be working. This happened very abruptly - I hadn't noticed any problems which might have been indicative of impending failure. Does anybody have any clue what may have caused this, and if there's any hope of making it work again? The memory only had a 30 day warranty, so I can't RMA it.

  Read the article

• Circumventing a manual HTML login page for "unclassified" websites

  - by auramo

  The IT department just made my life a little bit harder again: they introduced a manual HTML login page for all websites they have not "classified". This means that all the applications which try to access unclassified websites for e.g. downloading plugins do not work. Examples: Eclipse plugin installation, Maven builds etc. What would be the easiest workaround for this? The best I've come up with is try to extend/customize Ruby's httpproxy.rb that comes with Webrick. I would automate the manual login process whenever that login response page is detected. This sounds quite painful, and I think there might/should be simpler options?

  Read the article

• How to change Winamp's default skin to Bento?

  - by glasnt

  If I install Winamp through automated means (e.g. Using http://ninite.com/), it is automatically installed using the default 'boxy' skin. I can't work out how to interface with this skin as easily as the new 'Bento' skin. In addition, there doesn't seem to be an option to download the Bento skin, or change the skin from Default to Bento without uninstalling and reinstalling it again. Is there a menu option or a downloadable skin that is the default Bento skin? Or do I have to re-install to get this 'new default' skin?

  Read the article

• How to Manage and Use LVM (Logical Volume Management) in Ubuntu

  - by Justin Garrison

  In our previous article we told you what LVM is and what you may want to use it for, and today we are going to walk you through some of the key management tools of LVM so you will be confident when setting up or expanding your installation. As stated before, LVM is a abstraction layer between your operating system and physical hard drives. What that means is your physical hard drives and partitions are no longer tied to the hard drives and partitions they reside on. Rather, the hard drives and partitions that your operating system sees can be any number of separate hard drives pooled together or in a software RAID Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

  Read the article

• Queue'ing cron jobs up to 10 times

  - by webnoob

  Hi All, This kind of touches on another post I made but is different so I have posted it as a new question. I have a script that runs that may take just over 1 minute to process, and my cron is set to run every minute. I can stop another cron job executing the script if the first one hasn't finished by using flock (php) in the file, however, this means that I would lose one iteration of the routine and have to wait nearly a minute before it is triggered again (as my understanding leads me to believe). What I would like to do is if the script is locked, not bomb out, but wait. Over time however, this could get quite high so I would also like to limit the amount of queued cron's to 10. I am a real newbie with Linux (had a Linux VPS for 3 days now) so I am not sure if my solution is even practical. Thanks.

  Read the article

• One hard drive missing after converting from ide to ahci

  - by user700859

  I have two 500GB SATA HDD in my desktop running XP. After converting from IDE to AHCI, the HDD I use to store data can no longer be accessed from XP. It shows only the first partition as 150GB, and data type is listed as RAW. However, if I boot into a live linux environment or if I pull that HDD out and connect it using USB, I can still get to all my files again. So I completely formatted the HDD into one single partition. But XP still does not recognize it. It still shows the disk as the 150GB partition and data type is still RAW. What's going on and how do I fix this? Thanks in advance.

  Read the article

• phpBB - display a public message when the whole board is private

  - by Sparky672

  In my installation all discussion forums/boards are private and can only be seen after a user registers and admin approves their membership. This is working. When a user first comes to the main phpBB page and they're not logged in, they can see very little except for the login and registration functions. Now I'm trying to configure phpBB to display a Read Me posting that is available to general public before registration or login. The problem is that I'd have to create a whole "public" forum and it would likely contain only one topic thread called "Read Me". The users would have to click into the public forum and then click again to get into the Topic called "Read Me". Is it possible to have a Topic thread outside of a forum? If not, is there another, better, way to achieve this? I just want to display a message, maybe a few short paragraphs to the public, explaining the purpose of the Forum and that they must register and wait for approval in order to gain additional access. I'm not seeing anything like this in the ACP. Thank-you.

  Read the article

• "Installing" GD for PHP

  - by gbuckingham89

  I'm new to server admin & Linux and have just got a VPS running CentOS 6. Apache, MySQL and PHP all came installed (along with cPanel and WHM), however I'm now also trying to install the GD library. I've run "yum install php-gd" and it installed ok. If I run it again I get "Package php-gd-5.3.2-6.el6_0.1.x86_64 already installed and latest version". However, when I do a phpinfo() or from the command line "php -m" there is no mention of GD. Is there anything else I need to do?

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >