Search Results

Search found 1826 results on 74 pages for 'formatted'.

Page 33/74 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Can I use dmraid instead of md (mdadm) to make software RAID-1 and RAID-1+0 volumes?

  - by Don MacAskill

  On a related question about SSDs and TRIM (see: Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux? ), it turns out that dmraid may now (or shortly) support TRIM on RAID-1. Typically, we've used md (via mdadm) to create our RAID-1 volumes, then used LVM to create volume groups, then formatted with the file system of our choice (ext4 lately). We've been doing this for years, and Google & ServerFault searches seem to confirm this is the most common way of doing software RAID with volume management. Google searches seem to suggest that dmraid is use for so-called 'fakeRAID' configurations where there's some level of hardware 'help' in the form of RAID BIOS in the controller, which we don't have (and don't want to use - we'd like a fully software solution). Since we'd like to use TRIM on our SSDs, and since md doesn't seem to (yet?) support TRIM, I'm wondering if it's possible to use dmraid instead of md to create RAID-1 (and RAID-1+0) volumes in software, with no hardware support (ie, just plugged into a dumb SATA/SAS bus)?

  Read the article

• Why can't windows see mmcblk0p3? [closed]

  - by jacknad

  The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

  Read the article

• safeboot and wubi

  - by G S

  Hi, Having read various posts it seems clear that installing Wubi on a machine which already has safeboot installed with disk encryption is a non-starter at the moment - nor is repartitioning the disk it would seem. However while the c: partion is encrypted - it has an NTFS formatted q: partition that is not encrypted and has about 4GB free - so I was wondering if there was any way to install WUBI using that partion. Obvisouly stil need a means of booting into it without stuffing my safeboot booting mechanism. I'm thinking that this should be possible as the safeboot booting mechanism will get me to the boot choice options and thereafter all references in the boot.ini entry for the wubi installtion should be to files on the non-encrypted NTFS partion and so it should be OK and not attempt any changes to my envrypted c: partion (other than adding the extra entry to boot.ini) ? any thoughts? ta

  Read the article

• Is there a point to using theft tracking software like Prey on my laptop, if you have login security?

  - by Reckage

  Hey, so I have a Thinkpad that I use in a variety of places (coffee shops, work, etc.). I don't generally abandon it, but I figure there's a chance I might get careless and it gets stolen at some point. I was thinking of installing something like Prey (http://preyproject.com/), but my OS installs are password secured, and on top of that, I have a fingerprint reader that you need just to get through the BIOS. So: is there actually any benefit to setting up software that tracks the laptop's whereabouts? I imagine that either: The laptop won't boot or login, if the thief doesn't get past the security. If the thief goes around said security somehow, presumably they've split the laptop for parts or bypassed BIOS security, gotten stuck on Windows security and formatted it. Given that it's highly unlikely that the thief would go to the trouble, what's the utility in installing laptop tracking software like Prey?

  Read the article

• What options are there for generating custom text snippets on the Mac?

  - by Moses

  As I am getting more heavily into programming as a job and no longer as a hobby, I am definitely in need of some ways to improve my productivity. One thing that would definitely help in that respect is being able to create customized keyboard shortcuts for text/code snippets. For instance, holding down CMD+L+O+R+E+M will output a paragraph or two of the Lorem ipsum filler text, or CMD+F+U creates a function declaration. What I am ideally looking for is a database where I can store formatted text snippets, bind them to my choice of keystrokes, and then have the text paste whenever I perform the associated keystrokes. Are there any stand-alone applications that can do this for a Mac. Also, are there any text editors / IDEs that have this ability built in?

  Read the article

• USB drive is empty in drive management

  - by Simon Verbeke

  I've got a USB drive here, that somebody asked to try and fix. When inserting it, it shows up in explorer, but when I double click it I get a message saying "Please insert a disk into drive H:". So I went to disk management, to see if it was correctly formatted. It doesn't show up in the upper pane, and in the lower pane it tells me there is no medium in H:. After this I used chkdsk: the path is invalid. Then I tried TestDisk, which is supposed to look at raw data, and this can't even find the disk. So I'm assuming the drive is dead, even though its LED is burning. But I was wondering if there might be something else I could try? This system is Windows 7 Ultimate 64bit by the way. (I'm translating things from a Dutch install, so some names might be wrong)

  Read the article

• Create a share on iscsi drive in Windows Server 2012

  - by Crash893

  I am brand new to server administration but I don't belive im trying to do anything to exotic I have a windows server 2012 (standard) and a drobo 800i My goal is to setup company shares on the iscsi target I have setup on the drobo So far I have: initialized the iscsi and connected made the iscsi disk read/write(it default started as read only) formatted and mounted it (as drive E:) from the server local desktop I can see and write files to the E:\ drive in shares wizard I do not see it as a volume option when I view the volumes window I see (e: drobo Fixed 16tb 16tb) I'm new to everything but I would think since its a mounted drive I should be able to share a folder on it but it appears its not that straight forward suggestions?

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• Error loading operating system WinXP Pro

  - by Jakesan

  So im getting the error "Error loading operating system" when the computer tries to boot to a fresh install of WinXP Pro. To get to this point, I: Shrunk the only partition with Gparted to 33GB Copied the partition to the end of the 200GB drive Enlarged the first one to fill the space Formatted the first partition to NTFS Set the first partition to boot, tagged the latter to hidden, removed boot flag This was done all under Hiren's BootCD. Now this is where it goes down the drain. I installed XP Pro SP1a from its CD, and chose to quick format the partition. Now after the OS was installed, I can't start XP without using the default menu action from Hiren's BootCD. All I am greeted with is the "error loading operating system" message. I tried to use the XP recovery to fixboot, fixmbr and bootcfg /rebuild (dont remember if the command was like this, anyway the 3 suggested commands). This did nothing. What am I missing here?

  Read the article

• Vantec NexStar NAS Encloser - Writing large files

  - by peter

  Hi, I have one of these 'Vantec NexStar LX - NST-475LX-BK' drive enclosures. It is a NAS drive. When I write a file to the device using eSata, or a SMB share I cannot write files over 2GB. I think this is because the drive is formatted with FAT32. But when I access the device using FTP it doesn't matter. I can write files of any size. E.g. I wrote one on there last night which was 30GB. Does this make any sense? Why? I guess the most important thing for me is data integrity.

  Read the article

• Wireless card not found on Ubuntu

  - by idealflip

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• Permissionless external drive with NTFS

  - by user12889

  I have an external hard disk which has 1 partition, formatted in NTFS. I use this drive on multiple computers with a different logins on different machines, Windows XP and Windows 7. All files are plain old files, not OS encrypted or compressed. Every now and then Windows 7 does not let me access some files, citing permission problems. I can circumvent this per case by taking ownership and setting appropriate permissions. This, however, is tedious. Is there a simple way to tell Windows to not enforce or store any permissions on any file/directory on a partition?

  Read the article

• Is there anything like a link or shared mount point for FAT32 folders in Linux/Android?

  - by endolith

  I often want the same files to be accessed by different apps on my Android phone, but the apps look in different folders. Is there a way to make two different folder paths on a FAT SD card point to the same file? For EXT, I think I could do this with a symbolic or hard link, but those don't exist for FAT. Can FAT be extended to support them? Can Android use an EXT-formatted SD card? Can a folder be mounted on top of another folder? If this does exist, does it have any negative side effects?

  Read the article

• How to resize the disk of a Fedora guest VM in VMWare ESXi

  - by Cerin

  How do I resize (specifically increase) the disk size of a Fedora guest VM running under VMWare ESXi 4.1? I have a Fedora 16 VM with an ext4 formatted disk, and I've increased its disk size using the vSphere client from 50GB to about 250GB. I rebooted the guest, and it correctly shows this size using fdisk -l /dev/sda. However, df -H still shows the old size. I've found a few KB articles explaining how to resize partitions for some flavors of Linux, but nothing for Fedora with ext4. That article seems to imply I have to create a completely new partition, and that I can't simply expand the existing partition. Using Gparted, it also prevents me from simply resizing the existing partition. Is this impossible to do under Linux?

  Read the article

• SSH + MysqlDump Remote Backup Script

  - by bundini

  I'm trying to issue a remote mysqldump command, redirect stdout to a dmp file, then tar that up. I'm a bit confused as to how to do the redirection bits over ssh: i.e. ssh [email protected] mysqldump $dbname -u admin -p > dbdump.dmp && tar cvzf dbdump.tar.gz dbdump.dmp Issues: 1) I'm not providing the password because I want it to prompt me. Will an ssh remote command deal with this? 2) What's the deal with the syntax? Do I want to use quotations, or don't I? What happens with the redirects and pipes? Do those have to be escaped or formatted in some special fashion.

  Read the article

• opening Dbf files in oracle 10g

  - by nagaraju

  This nagaraju,from India,Hyderabad. I have installed oracle 10g trail version in my system(E drive),created one database with my name(database:-nagaraju),in that created tables, prodecures ,functions ,sequences etc for my project. Due to some sudden problem,i formatted my machine C drive,now iam not ablle to open my database, i need all procedures ,tables which i created in that. Now I newly installed oracle10g again in another folder,how can i copy my old database into my inew installation database. Or can i copy the script of procedures so that ican run in new database. I have all data in Oradata folder,like DBF files etc. Could you please help me, how to do that?

  Read the article

• Word 2003: Bullet style renamed; is there some way to reverse this?

  - by Margaret

  I have a machine that seems to have had its bullet style permanently changed - I previously was creating a document which had a question/answer format, where the answers were bullet points, so I created a style for them. The problem is, it seems to have stuck. If you click the "Bullet" button, the paragraph is formatted in the style. I've tried deleting the style in Normal.dot, and even deleting the Normal.dot file in the entirely - neither seems to fix the problem. Anyone have any other bright ideas on how to fix it?

  Read the article

• Best filesystem for an external drive? ExFAT?

  - by GiH

  What is the best filesystem for use with multiple OS's? I saw this question but its old and doesn't take into account ExFAT. Here is what I know from my findings: NTFS - Can't write from Mac FAT32 - Doesn't support files larger than 4GB HFS - Only mac ExFAT - ??? I don't know much about this but it seems like it got rid of the 4GB limit of FAT32 and can be read on Windows, Mac, and Linux. Is ExFAT the best bet? I tried formatting the drive in ExFAT just now, but on Windows XP SP3 it was showing up as not formatted... It seems to me like FAT32 is still the best, but I wanted to see what other people had to say.

  Read the article

• Vantec NexStar NAS Encloser - Writing large files

  - by peter

  I have one of these 'Vantec NexStar LX - NST-475LX-BK' drive enclosures. It is a NAS device. When I write a file to the device using eSata, or a SMB share I cannot write files over 4GB. I think this is because the drive is formatted with FAT32. But when I access the device using FTP it doesn't matter. I can write files of any size. E.g. I wrote one on there last night which was 30GB. Does this make any sense? Why? I guess the most important thing for me is data integrity.

  Read the article

• data protector red tapes

  - by Caesar

  I am using HP Data Protector A.06.11 in my organization, with HP EML E-SeriesEML library, with 4 drives using LTO-4 tapes, and i am having some problems. Yesterday I put 5 new tapes in the robot and formatted them. At that time, the robot got just those empty 5 tapes with empty space. (all the rest of the tapes are red, or with protection) Today in the morning after the night (1 backup run at night), and 2 of the new tapes are red (the properties are): Writes : 2 Overwrites : 1 Errors : 9 I format one of them, and check for each drive if the tape become red, no one of the drives do it. In the main pool properties, in media condition got: Valid for : 36 (months) Maximum overwrites : 250

  Read the article

• Hard drive caught malware and all folders are in shortcuts

  - by Ammar

  I have an external hard drive from Seagate. I think it accidently caught a malware/virus, since all the files in there became shortcut folders. I have very important folders and now I cannot access them at all. I did not have an antivirus program; I just formatted the PC and forgot to install one. Just recently, I installed Avira and it caught the malware, but since I removed the malware via Avira, I can't access anything now. Please help me on what I need to do. I am really lost.

  Read the article

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

• Importing CSV files into Excel using a macro

  - by B-Ballerl

  I'm want to develop a macro where in my excel worksheet I type a date in a specific cell, and the macro will go into a folder containing text files. A database you could say. I want it to find the corresponding file name which is written as a date, put the data through a delimeter, and paste into the cells directly below where I orginally put the date. I'm very new with Macro's so if you must answer try to be a little more simple than you might usually be. Thanks In Advance if anyone can Help!! Update The folder will always be in the same place and the text files will all be formatted DD_MM_YYYY. And there cells below will always be empty Some Pictures to Make what I'm asking, easier to figure out. View the Image in a new tab for better res.

  Read the article

• Easiest Driver Back Up solution ?

  - by mgpyone

  I've to faced kinda of missing drivers after formatted Windows .. Especially, Graphic Drivers, Touch-pad driver, finger print driver and so forth are sensitive . They do not work without installing drivers. I can even download at its official website . But some drivers are not found in the website. .. Thus, I'm looking for a solution ( may be a software ) that can backup my drivers effectively ( if it can do with schedule, it'll be great) and can restore easily locally . Espcially, for Win XP and Vista. Any suggestions will be appreciated really.

  Read the article

• scp vs netatalk, samba, and/or vsftpd with External USB drive

  - by KitsuneYMG

  I set up a ubuntu server machine to share an ext2 formatted external usb drive. When attempting to copy a single 275MB files from said device through netatalk, I get estimated download rates at around 45 min. With samba and ftp (using vsftpd) I get 1+ hours! Using scp to copy the file results in complete download within 5 minutes. Another option, ssh+cp from external device to ~ and then using netatalk to grab it from there results in a total time of arounf 7 minutes. Does anyone have a clue what is misconfigured? Assuming that nothing is, is there any fs/pseudo-fs that would use the internal hdd as an intermediate location/onion-layer for the external hdd (for reads only)? Details: AppleVolumes.default: /mnt/ext USB allow:username cnidscheme:cdb options:usedots,upriv

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >