Search Results

Search found 3883 results on 156 pages for 'xna newbie'.

Page 33/156 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Improving SpriteBatch performance for tiles

  - by Richard Rast

  I realize this is a variation on what has got to be a common question, but after reading several (good answers) I'm no closer to a solution here. So here's my situation: I'm making a 2D game which has (among some other things) a tiled world, and so, drawing this world implies drawing a jillion tiles each frame (depending on resolution: it's roughly a 64x32 tile with some transparency). Now I want the user to be able to maximize the game (or fullscreen mode, actually, as its a bit more efficient) and instead of scaling textures (bleagh) this will just allow lots and lots of tiles to be shown at once. Which is great! But it turns out this makes upward of 2000 tiles on the screen each time, and this is framerate-limiting (I've commented out enough other parts of the game to make sure this is the bottleneck). It gets worse if I use multiple source rectangles on the same texture (I use a tilesheet; I believe changing textures entirely makes things worse), or if you tint the tiles, or whatever. So, the general question is this: What are some general methods for improving the drawing of thousands of repetitive sprites? Answers pertaining to XNA's SpriteBatch would be helpful but I'm equally happy with general theory. Also, any tricks pertaining to this situation in particular (drawing a tiled world efficiently) are also welcome. I really do want to draw all of them, though, and I need the SpriteMode.BackToFront to be active, because

  Read the article

• Getting into game/game engine programming

  - by Darkslash

  So I am interested in learning game programming, but I really have an interest in the lower level engineering in games. I have openGL experience, and I am really interested in learning more about implementing AI, Physics, etc. I have a computer science degree, so I really like getting into technical stuff. Many times when I ask about this sort of thing, I get a lot of "Use an engine", "Use Unity3d", "Why waste your time writing code that already exists", etc etc. My idea was to use simpler libraries such as SFML or XNA so that I could learn how to implement the more complex systems. The thing is, although I do want to write games, I want to learn things that using something like Unity simply doesnt teach you. My goal is not to make a current generation quality 3D game to sell, I just want to make some cool smaller games and learn all I can about the programming side of game development. Is this something that people just do not do anymore? It seems like everywhere I turn people are using Unity or UDK or GameMaker. I fully understand why you would use a tool like these, but I cant see how they would suit my purposes. So where does someone like myself turn? Am I trying to learn something that people just do not bother doing anymore? Is the innovation in this area gone and just all about gameplay now? Im sorry if this question seems silly, but I am genuinely interested in knowing more about this and meeting more people who are interested in this sort of thing.

  Read the article

• Stencil mask with AlphaTestEffect

  - by Brendan Wanlass

  I am trying to pull off the following effect in XNA 4.0: http://eng.utah.edu/~brendanw/question.jpg The purple area has 50% opacity. I have gotten pretty close with the following code: public static DepthStencilState AlwaysStencilState = new DepthStencilState() { StencilEnable = true, StencilFunction = CompareFunction.Always, StencilPass = StencilOperation.Replace, ReferenceStencil = 1, DepthBufferEnable = false, }; public static DepthStencilState EqualStencilState = new DepthStencilState() { StencilEnable = true, StencilFunction = CompareFunction.Equal, StencilPass = StencilOperation.Keep, ReferenceStencil = 1, DepthBufferEnable = false, }; ... if (_alphaEffect == null) { _alphaEffect = new AlphaTestEffect(_spriteBatch.GraphicsDevice); _alphaEffect.AlphaFunction = CompareFunction.LessEqual; _alphaEffect.ReferenceAlpha = 129; Matrix projection = Matrix.CreateOrthographicOffCenter(0, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferWidth, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferHeight, 0, 0, 1); _alphaEffect.Projection = world.SystemManager.GetSystem<RenderSystem>().Camera.View * projection; } _mask = new RenderTarget2D(_spriteBatch.GraphicsDevice, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferWidth, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferHeight, false, SurfaceFormat.Color, DepthFormat.Depth24Stencil8); _spriteBatch.GraphicsDevice.SetRenderTarget(_mask); _spriteBatch.GraphicsDevice.Clear(ClearOptions.Target | ClearOptions.Stencil, Color.Transparent, 0, 0); _spriteBatch.Begin(SpriteSortMode.Immediate, null, null, AlwaysStencilState, null, _alphaEffect); _spriteBatch.Draw(sprite.Texture, position, sprite.SourceRectangle,Color.White, 0f, sprite.Origin, 1f, SpriteEffects.None, 0); _spriteBatch.End(); _spriteBatch.Begin(SpriteSortMode.Immediate, null, null, EqualStencilState, null, null); _spriteBatch.Draw(_maskTex, new Vector2(x * _maskTex.Width, y * _maskTex.Height), null, Color.White, 0f, Vector2.Zero, 1f, SpriteEffects.None, 0); _spriteBatch.End(); _spriteBatch.GraphicsDevice.SetRenderTarget(null); _spriteBatch.GraphicsDevice.Clear(Color.Black); _spriteBatch.Begin(); _spriteBatch.Draw((Texture2D)_mask, Vector2.Zero, null, Color.White, 0f, Vector2.Zero, 1f, SpriteEffects.None, layer/max_layer); _spriteBatch.End(); My problem is, I can't get the AlphaTestEffect to behave. I can either mask over the semi-transparent purple junk and fill it in with the green design, or I can draw over the completely opaque grassy texture. How can I specify the exact opacity that needs to be replace with the green design?

  Read the article

• How to create water like in new super mario bros?

  - by user1103457

  I assume the water in New super mario bros works the same as in the first part of this tutorial: http://gamedev.tutsplus.com/tutorials/implementation/make-a-splash-with-2d-water-effects/ But in new super mario bros the water also has constant waves on the surface, and the splashes look very different. What's also a difference is that in the tutorial, if you create a splash, it first creates a deep "hole" in the water at the origin of the splash. In new super mario bros this hole is absent or much smaller. When I refer to the splashes in new super mario bros I am referring to the splashes that the player creates when jumping in and out of the water. For reference you could use this video: http://www.ign.com/videos/2012/11/17/new-super-mario-bros-u-3-star-coin-walkthrough-sparkling-waters-1-waterspout-beach just after 00:50, when the camera isn't moving you can get a good look at the water and the constant waves. there are also some good examples of the splashes during that time. How do they create the constant waves and the splashes? I am programming in XNA. (I have tried this myself but couldn't really get it all to work well together) (and as bonus questions: how do they create the light spots just under the surface of the waves, and how do they texture the deeper parts of the water? This is the first time I try to create water like this.)

  Read the article

• Loading a new instance of a class through XML not working quite right

  - by Thegluestickman

  I'm having trouble with XML and XNA. I want to be able to load weapon settings through XML to make my weapons easier to make and to have less code in the actual project file. So I started out making a basic XML document, something to just assign variables with. But no matter what I changed it gave me a new error every time. The code below gives me a "XML element 'Tag' not found", I added and it started to say the variables weren't found. What I wanted to do in the XML file as well, was load a texture for the file too. So I created a static class to hold my texture values, then in the Texture tag of my XML document I would set it to that instance too. I think that's were the problems are occuring because that's where the "XML element 'Tag' not found" error is pointing me too. My XML document: <XnaContent> <Asset Type="ConversationEngine.Weapon"> <weaponStrength>0</weaponStrength> <damageModifiers>0</damageModifiers> <speed>0</speed> <magicDefense>0</magicDefense> <description>0</description> <identifier>0</identifier> <weaponTexture>LoadWeaponTextures.ironSword</weaponTexture> </Asset> </XnaContent> My Class to load the weapon XML: public static class LoadWeaponXML { static Weapon Weapons; public static Weapon WeaponLoad(ContentManager content, int id) { Weapons = content.Load<Weapon>(@"Weapons/" + id); return Weapons; } } public static class LoadWeaponTextures { public static Texture2D ironSword; public static void TextureLoad(ContentManager content) { ironSword = content.Load<Texture2D>("Sword"); } } I'm not entirely sure if you can load textures through XML, but any help would be greatly appreciated.

  Read the article

• 2D graphics - why use spritesheets?

  - by Columbo

  I have seen many examples of how to render sprites from a spritesheet but I havent grasped why it is the most common way of dealing with sprites in 2d games. I have started out with 2d sprite rendering in the few demo applications I've made by dealing with each animation frame for any given sprite type as its own texture - and this collection of textures is stored in a dictionary. This seems to work for me, and suits my workflow pretty well, as I tend to make my animations as gif/mng files and then extract the frames to individual pngs. Is there a noticeable performance advantage to rendering from a single sheet rather than from individual textures? With modern hardware that is capable of drawing millions of polygons to the screen a hundred times a second, does it even matter for my 2d games which just deal with a few dozen 50x100px rectangles? The implementation details of loading a texture into graphics memory and displaying it in XNA seems pretty abstracted. All I know is that textures are bound to the graphics device when they are loaded, then during the game loop, the textures get rendered in batches. So it's not clear to me whether my choice affects performance. I suspect that there are some very good reasons most 2d game developers seem to be using them, I just don't understand why.

  Read the article

• How do I properly use String literals for loading content?

  - by Dave Voyles

  I've been using verbatim string literals for some time now, and never quite thought about using a regular string literal until I started to come across them in Microsoft provided XNA samples. With that said, I'm trying to implement a new AudioManager class from the Net Rumble sample. I have two (2) issues here: Question 1: In my code for my GameplayScreen screen I have a folder location written as the following, and it works fine: menuButton = content.Load<SoundEffect>(@"sfx/menuButton"); menuClose = content.Load<SoundEffect>(@"sfx/menuClose"); If you notice, you'll see that I'm using a verbatim string, with a forward slash "/". In the AudioManager class, they use a regular string literal, but with two backslashes "\". I understand that one is used as an escape, but why are they BACK instead of FORWARD? (See below) soundList[soundName] = game.Content.Load<SoundEffect>("audio\\wav\\"+ soundName); Question 2: I seem to be doing everything correctly in my AudioManager class, but I'm not sure of what this line means: audioFileList = audioFolder.GetFiles("*.xnb"); I suppose that the *xnb means look for everything BUT files that end in *xnb? I can't figure out what I'm doing wrong with my file locations, as the sound effects are not playing. My code is not much different from what I've linked to above. private AudioManager(Game game, DirectoryInfo audioDirectory) : base(game) { try { audioFolder = audioDirectory; audioFileList = audioFolder.GetFiles("*.mp3"); soundList = new Dictionary<string, SoundEffect>(); for (int i = 0; i < audioFileList.Length; i++) { string soundName = Path.GetFileNameWithoutExtension(audioFileList[i].Name); soundList[soundName] = game.Content.Load<SoundEffect>(@"sfx\" + soundName); soundList[soundName].Name = soundName; } // Plays this track while the GameplayScreen is active soundtrack = game.Content.Load<Song>("boomer"); } catch (NoAudioHardwareException) { // silently fall back to silence } }

  Read the article

• Drawing multiple triangles at once isn't working

  - by Deukalion

  I'm trying to draw multiple triangles at once to make up a "shape". I have a class that has an array of VertexPositionColor, an array of Indexes (rendered by this Triangulation class): http://www.xnawiki.com/index.php/Polygon_Triangulation So, my "shape" has multiple points of VertexPositionColor but I can't render each triangle in the shape to "fill" the shape. It only draws the first triangle. struct ShapeColor { // Properties (not all properties) VertexPositionColor[] Points; int[] Indexes; } First method that I've tried, this should work since I iterate through the index array that always are of "3s", so they always contain at least one triangle. //render = ShapeColor for (int i = 0; i < render.Indexes.Length; i += 3) { device.DrawUserIndexedPrimitives<VertexPositionColor> ( PrimitiveType.TriangleList, new VertexPositionColor[] { render.Points[render.Indexes[i]], render.Points[render.Indexes[i+1]], render.Points[render.Indexes[i+2]] }, 0, 3, new int[] { 0, 1, 2 }, 0, 1 ); } or the method that should work: device.DrawUserIndexedPrimitives<VertexPositionColor> ( PrimitiveType.TriangleList, render.Points, 0, render.Points.Length, render.Indexes, 0, render.Indexes.Length / 3, VertexPositionColor.VertexDeclaration ); No matter what method I use this is the "typical" result from my Editor (in Windows Forms with XNA) It should show a filled shape, because the indexes are right (I've checked a dozen of times) I simply click the screen (gets the world coordinates, adds a point from a color, when there are 3 points or more it should start filling out the shape, it only draws the lines (different method) and only 1 triangle). The Grid isn't rendered with "this" shape. Any ideas?

  Read the article

• Deferred rendering with both Clockwise and CounterClockwise culling

  - by user1423893

  I have a deferred rendering system that works well with objects that appear solid and drawn using CounterClockwise culling. I have a problem with Clockwise culled objects that are supposed to represent hollow that display their inside faces only. The image below shows a CounterClockwise culled object (left) Clockwise culled object (right). The Clockwise culled object faces display what would be displayed on the CounterClockwise face. How can I get the lighting to light the inner faces for Clockwise culled objects and continue lighting the outer CounterClockwise faces as normal? My lighting method is below private void DeferredLighting(GameTime gameTime) { // Set the render target for the lights game.GraphicsDevice.SetRenderTarget(lightMap); // Clear the render target to (0, 0, 0, 0) game.GraphicsDevice.Clear(Color.Transparent); // Set the render states game.GraphicsDevice.BlendState = BlendState.Additive; game.GraphicsDevice.DepthStencilState = DepthStencilState.None; game.GraphicsDevice.RasterizerState = RasterizerState.CullCounterClockwise; // Set sampler state to Point as the Surface type requires it in XNA 4.0 game.GraphicsDevice.SamplerStates[0] = SamplerState.PointClamp; // Set the camera properties for all lights BaseLight.SetCameraProperties(game.ActiveCamera); // Draw the lights int numLights = lights.Count; for (int i = 0; i < numLights; ++i) { if (lights[i].Diffuse.W > 0f) { lights[i].Render(gameTime, ref normalMap, ref depthMap, ref sgrMap); } } // Resolve the render target game.GraphicsDevice.SetRenderTarget(null); } I have tried adjusting the render states but no combination works for both objects.

  Read the article

• Obtaining a world point from a screen point with an orthographic projection

  - by vargonian

  I assumed this was a straightforward problem but it has been plaguing me for days. I am creating a 2D game with an orthographic camera. I am using a 3D camera rather than just hacking it because I want to support rotating, panning, and zooming. Unfortunately the math overwhelms me when I'm trying to figure out how to determine if a clicked point intersects a bounds (let's say rectangular) in the game. I was under the impression that I could simply transform the screen point (the clicked point) by the inverse of the camera's View * Projection matrix to obtain the world coordinates of the clicked point. Unfortunately this is not the case at all; I get some point that seems to be in some completely different coordinate system. So then as a sanity check I tried taking an arbitrary world point and transforming it by the camera's View*Projection matrices. Surely this should get me the corresponding screen point, but even that didn't work, and it is quickly shattering any illusion I had that I understood 3D coordinate systems and the math involved. So, if I could form this into a question: How would I use my camera's state information (view and projection matrices, for instance) to transform a world point to a screen point, and vice versa? I hope the problem will be simpler since I'm using an orthographic camera and can make several assumptions from that. I very much appreciate any help. If it makes a difference, I'm using XNA Game Studio.

  Read the article

• SEHException throw using Microsoft XACT Audio Framework (XACT3)

  - by Sweta Dwivedi

  I have been developing a game using Kinect + XNA and using Microsoft Audio Creation tool (XACT3) for managing my sound files and music, however in the code an SEHException is thrown whenever it tries to get the wave file from the wave Bank . . Sometimes the code works magically and all of a sudden it will start throwing this exception randomly ..I need a help on solving this exception /*Declaring Audio Engine for music*/ AudioEngine engine; SoundBank soundBank; WaveBank waveBank; Cue cue; /*Declaring Audio engine for sound effects*/ AudioEngine engine1; SoundBank soundbank; WaveBank wavebank; Cue effect; engine = new AudioEngine(@"Content\therapy.xgs"); soundBank = new SoundBank(engine, @"Content\Sound Bank.xsb"); **waveBank = new WaveBank(engine, @"Content\Wave Bank.xwb");** cue = null; engine1 = new AudioEngine(@"Content\Music_Manager\Sound_effects.xgs"); soundbank = new SoundBank(engine1, @"Content\Music_Manager\Sound1.xsb"); **wavebank = new WaveBank(engine1, @"Content\Music_Manager\Wave1.xwb");** effect = null; cue = soundBank.GetCue("hypnotizing"); cue.Play();

  Read the article

• 2D Collision masks for handling slopes

  - by JiminyCricket

  I've been looking at the example at: http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel and am trying to figure out how to adjust the sprite once a collision has been detected. As David suggested at XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision, I made a few sensor points (feet, sides, bottom center, etc.) and can easily detect when these points actually collide with non-transparent portions of a second texture (simple slope). I'm having trouble with the algorithm of how I would actually adjust the sprite position based on a collision. Say I detect a collision with the slope at the sprite's right foot. How can I scan the slope texture data to find the Y position to place the sprite's foot so it is no longer inside the slope? The way it is stored as a 1D array in the example is a bit confusing, should I try to store the data as a 2D array instead? For test purposes, I'm thinking of just using the slope texture alpha itself as a primitive and easy collision mask (no grass bits or anything besides a simple non-linear slope). Then, as in the example, I find the coordinates of any collisions between the slope texture and the sprite's sensors and mark these special sensor collisions as having occurred. Finally, in the case of moving up a slope, I would scan for the first transparent pixel above (in the texture's Ys at that X) the right foot collision point and set that as the new height of the sprite. I'm a little unclear also on when I should make these adjustments. Collisions are checked on every game.update() so would I quickly change the position of the sprite before the next update is called? I also noticed several people mention that it's best to separate collision checks horizontally and vertically, why is that exactly? Open to any suggestions if this is an inefficient or inaccurate way of handling this. I wish MSDN had provided an example of something like this, I didn't know it would be so much more complex than NES Mario style pure box platforming!

  Read the article

• Draw depth works on WP7 emulator but not device

  - by Luke

  I am making a game on a WP7 device using C# and XNA. I have a system where I always want the object the user is touching to be brought to the top, so every time it is touched I add float.Epsilon to its draw depth (I have it set so that 0 is the back and 1 is the front). On the Emulator that all works fine, but when I run it on my device the draw depths seem to be completely random. I am hoping that anybody knows a way to fix this. I have tried doing a Clean & Rebuild and uninstalling from the device but that is no luck. My call to spritebatch.Begin is: spriteBatch.Begin(SpriteSortMode.FrontToBack, BlendState.AlphaBlend); and to draw I use spriteBatch.Draw(Texture, new Rectangle((int)X, (int)Y, (int)Width, (int)Height), null, Color.White, 0, Vector2.Zero, SpriteEffects.None, mDrawDepth); Where mDrawDepth is a float value of the draw depth (likely to be a very small number; a small multiple of float.Epsilon. Any help much appreciated, thanks!

  Read the article

• How do I adjust the origin of rotation for a group of sprites?

  - by Jon

  I am currently grouping sprites together, then applying a rotation transformation on draw: private void UpdateMatrix(ref Vector2 origin, float radians) { Vector3 matrixorigin = new Vector3(origin, 0); _rotationMatrix = Matrix.CreateTranslation(-matrixorigin) * Matrix.CreateRotationZ(radians) * Matrix.CreateTranslation(matrixorigin); } Where the origin is the Centermost point of my group of sprites. I apply this transformation to each sprite in the group. My problem is that when I adjust the point of origin, my entire sprite group will re-position itself on screen. How could I differentiate the point of rotation used in the transformation, from the position of the sprite group? Is there a better way of creating this transformation matrix? EDIT Here is the relevant part of the Draw() function: Matrix allTransforms = _rotationMatrix * camera.GetTransformation(); spriteBatch.Begin(SpriteSortMode.BackToFront, null, null, null, null, null, allTransforms); for (int i = 0; i < _map.AllParts.Count; i++) { for (int j = 0; j < _map.AllParts[0].Count; j++) { spriteBatch.Draw(_map.AllParts[i][j].Texture, _map.AllParts[i][j].Position, null, Color.White, 0, _map.AllParts[i][j].Origin, 1.0f, SpriteEffects.None, 0f); } } This all works fine, again, the problem is that when a rotation is set and the point of origin is changed, the sprite group's position is offset on screen. I am trying to figure out a way to adjust the point of origin without causing a shift in position. EDIT 2 At this point, I'm looking for workarounds as this is not working. Does anyone know of a better way to rotate a group of sprites in XNA? I need a method that will allow me to modify the point of rotation (origin) without affecting the position of the sprite group on screen.

  Read the article

• Camera Collision inside the room model

  - by sanddy

  I am having a problem in Calculating the camera collision for my Room model which consists of sofa, tables and other models. The users shall be moving the camera front, back, rotating so i need to make sure that the camera does not collide with any of the models with in the room. I have treated all my models inside the room by BoundingBox[] and the camera by BoundingSphere. So, far i have implemented collision by looking into the tutorial from http://www.toymaker.info/Games/XNA/html/xna_model_collisions.html which was great. But, I guess the problem lies in the Transformation part. I debugged and found some points to be at Vector(-XXX,-XXX,-XXX) where X is digit. Also i found my radius of some models where too large(in thousand, i just looked into its radius value before converting to BoundingBox). Do I need to scale the model for collision??? Below are my code:- On My LoadContent(): Matrix[] transforms = new Matrix[myModel.Bones.Count]; myModel.CopyAbsoluteBoneTransformsTo(transforms); int index = 0; box = new List<BoundingBox>(); BoundingBox worldModel = Utility.CalculateBoundingBox(myModel); foreach (ModelMesh mesh in myModel.Meshes) { Vector3[] obb = new Vector3[8]; worldModel.GetCorners(obb); Vector3[] asdf = (Vector3[])obb.Clone(); Vector3.Transform(obb, ref transforms[mesh.ParentBone.Index], obb); BoundingBox worldBox = BoundingBox.CreateFromPoints(obb); box.Add(worldBox); index++; } On CameraPosition Update: BoundingSphere bs = new BoundingSphere(this.cameraPos, 5.0f); if (RoomWalkthrough.Utility.CheckCollision(bs, bb)) { // Do Something } Please Help.

  Read the article

• How to loop section from a song correctly?

  - by Teflo

  I'm programming a little Music Engine for my game in C# and XNA, and one aspect from it is the possibility to loop a section from a song. For example, my song has an intropart, and when the song reached the end ( or any other specific point ), it jumps back where the intropart is just over. ( A - B - B - B ... ) Now I'm using IrrKlank, which is working perfectly, without any gaps, but I have a problem: The point where to jump back is a bit inaccurate. Here's some example code: public bool Passed(float time) { if ( PlayPosition >= time ) return true; return false; } //somewhere else if( song.Passed( 10.0f ) ) song.JumpTo( 5.0f ); Now the problem is, the song passes the 10 seconds, but play a few milliseconds until 10.1f or so, and then jumps to 5 seconds. It's not that dramatic, but very incorrect for my needs. I tried to fix it like that: public bool Passed( float time ) { if( PlayPosition + 3 * dt >= time && PlayPosition <= time ) return true; return false; } ( dt is the delta time, the elapsed time since the last frame ) But I don't think, that's a good solution for that. I hope, you can understand my problem ( and my english, yay /o/ ) and help me :)

  Read the article

• Isometric Camera trouble - can't rotate or move correctly

  - by Deukalion

  I'm trying to create a 3D editor, but I've been having some trouble with the Camera and understanding each component. I've created 2 camera that works OK, but now I'm trying to implement an Isometric Camera in XNA without success on the rotation and movement of the camera. All I get working is Zoom. (Cube with x=3f, y=3f, z=1f in center) And this is the constructor for my IsometricCamera (inherits from ICamera, with methods for Rotation, Movement and Zoom, and Properties for World/View/Projection matrices) public IsometricCamera3D(GraphicsDevice device, float startClip = -1000f, float endClip = 1000f) { matrix_projection = Matrix.CreateOrthographic(device.Viewport.Width, device.Viewport.Height, startClip, endClip); rotation = Vector3.Zero; matrix_view = Matrix.CreateScale(zoom) * Matrix.CreateRotationY(MathHelper.ToRadians(45 + 180)) * Matrix.CreateRotationX(MathHelper.ToRadians(30)) * Matrix.CreateRotationZ(MathHelper.ToRadians(120)) * Matrix.CreateTranslation(rotation.X, rotation.Y, rotation.Z); } Problem is when I rotate it, all that happens is that the Cube gets more or less shiny and nothing happens. What is wrong and how should I create my View matrix to move it / rotate it correctly? Rotate, Move and Zoom looks like: MethodName(Vector3 rotation/movement), Zoom(float value); and just increases the value, then calls an update to recreate the View Matrix according to the code in the constructor. Currently, in my editor I use MiddleButton + Mouse Movement to rotate the camera, but it's not working as the other camera. But in my default camera I use World Matrix to move, but I guess that's not the best way to go which is why I'm trying this.

  Read the article

• How to manage drawing loop when changing render targets

  - by George Duckett

  I'm managing my game state by having a base GameScreen class with a Draw method. I then have (basically) a stack of GameScreens that I render. I render the bottom one first, as screens above might not completely cover the ones below. I now have a problem where one GameScreen changes render targets while doing its rendering. Anything the previous screens have drawn to the backbuffer is lost (as XNA emulates what happens on the xbox). I don't want to just set the backbuffer to preserve its contents as I want this to work on the xbox as well as PC. How should I manage this problem? A few ideas I've had: Render every GameScreen to its own render target, then render them all to the backbuffer. Create some kind of RenderAction queue where a game screen (and anything else I guess) could queue something to be rendered to the back buffer. They'd render whatever they wanted to any render target as normal, but if they wanted to render to the backbuffer they'd stick that in a queue which would get processed once all rendertarget rendering was done. Abstract away from render targets and backbuffers and have some way of representing the way graphics flows and transforms between render targets and have something manage/work out the correct rendering order (and render targets) given what rendering process needs as input and what it produces as output. I think each of my ideas have pros and cons and there are probably several other ways of approaching this general problem so I'm interested in finding out what solutions are out there.

  Read the article

• improve Collision detection memory usage (blocks with bullets)

  - by Eddy

  i am making a action platform 2D game, something like Megaman. I am using XNA to make it. already made player phisics,collisions, bullets, enemies and AIs, map editor, scorolling X Y camera (about 75% of game is finished ). as i progressed i noticed that my game would be more interesting to play if bullets would be destroyed on collision with regular(stationary ) map blocks, only problem is that if i use my collision detection (each bullet with each block) sometimes it begins to lag(btw if my bullet exits the screen player can see it is removed from bullet list) So how to improve my collision detection so that memory usage would be so high? :) ( on a map 300x300 blocks for example don't think that bigger map should be made); int block = 0; int bulet= 0; bool destroy_bullet = false; while (bulet < bullets.Count) { while (block < blocks.Count) { if (bullets[bulet].P_Bul_rec.Intersects( blocks[block].rect)) {//bullets and block are Lists that holds objects of bullet and block classes //P_Bul_rec just bullet rectangle destroy_bullet = true; } block++; } if (destroy_bullet) { bullets.RemoveAt(bulet); destroy_bullet = false; } else { bulet++; } block = 0; }

  Read the article

• Scaling Sound Effects and Physics with Framerate

  - by Thomas Bradsworth

  (I'm using XNA and C#) Currently, my game (a shooter) runs flawlessly with 60 FPS (which I developed around). However, if the framerate is changed, there are two major problems: Gunshot sound effects are slower Jumping gets messed up Here's how I play gunshot sounds: update(gametime) { if(leftMouseButton.down) { enqueueBulletForSend(); playGunShot(); } } Now, obviously, the frequency of playGunShot depends on the framerate. I can easily fix the issue if the FPS is higher than 60 FPS by capping the shooting rate of the gun, but what if the FPS is less than 60? At first I thought to just loop and play more gunshots per frame, but I found that this can cause audio clipping or make the bullets fire in "clumps." Now for the second issue: Here's how jumping works in my game: if(jumpKey.Down && canJump) { velocity.Y += 0.224f; } // ... (other code) ... if(!onGround) velocity.Y += GRAVITY_ACCELERATION * elapsedSeconds; position += velocity; The issue here is that at < 60 FPS, the "intermediate" velocity is lost and therefore the character jumps lower. At 60 FPS, the game adds more "intermediate" velocities, and therefore the character jumps higher. For example, at 60 FPS, the following occurs: Velocity increased to 0.224 Not on ground, so velocity decreased by X Position increased by (0.224 - X) <-- this is the "intermediate" velocity At 30 FPS, the following occurs: Velocity increased to 0.224 Not on ground, so velocity decreased by 2X Position increased by (0.224 - 2X) <-- the "intermediate" velocity was lost All help is appreciated!

  Read the article

• How to code Time Stop or Bullet Time in a game?

  - by David Miler

  I am developing a single-player RPG platformer in XNA 4.0. I would like to add an ability that would make the time "stop" or slow down, and have only the player character move at the original speed(similar to the Time Stop spell from the Baldur's Gate series). I am not looking for an exact implementation, rather some general ideas and design-patterns. EDIT: Thanks all for the great input. I have come up with the following solution public void Update(GameTime gameTime) { GameTime newGameTime = new GameTime(gameTime.TotalGameTime, new TimeSpan(gameTime.ElapsedGameTime.Ticks / DESIRED_TIME_MODIFIER)); gameTime = newGameTime; or something along these lines. This way I can set a different time for the player component and different for the rest. It certainly is not universal enough to work for a game where warping time like this would be a central element, but I hope it should work for this case. I kinda dislike the fact that it litters the main Update loop, but it certainly is the easiest way to implement it. I guess that is essentialy the same as tesselode suggested, so I'm going to give him the green tick :)

  Read the article

• Why am I getting a return value of zero from my position computation function?

  - by Hussain Murtaza

  Ok I have a Function int x(), which is used in new Rectangle(x(),a,a,a); in DrawMethod in XNA but when I use it I get x() = 0 as as the answer.Here is my CODE: int x() { int px = (128 * 5); int xx = 0; for (int i = 0; i < 6; i++) { if (Mouse.GetState().X > px) { //xx = Mouse.GetState().X; xx = px; break; } else { px -= 128; } } return xx; } Here is the DrawMethod Code: if (set) { spriteBatch.Draw(texture, new Rectangle(x(), y(), texture.Width, texture.Height), Color.White); textpositionX = x(); textpositionY = y(); set = false; select = false; place = true; } else if(select) { spriteBatch.Draw(texture, new Rectangle(Mouse.GetState().X - texture.Width / 2, Mouse.GetState().Y-texture.Height / 2, texture.Width, texture.Height), Color.White); } else if (place) { spriteBatch.Draw(texture, new Rectangle(textpositionX, textpositionY, texture.Width, texture.Height), Color.White); select = false; set = false; }

  Read the article

• Class Design - Space Simulator

  - by Peteyslatts

  I have pretty much taught myself everything I know about programming, so while I know how to teach myself (books, internet and reading API's), I'm finding that there hasn't been a whole lot in the way of good programming. So I have two questions: First the broad one: Does anyone have suggestions as to sources for learning about good programming habits and techniques? I'd prefer it if the resource wasn't a 5000 page tome. The more I can read it in installments the better. More specifically: I am finishing up learning the basics of XNA and I want to create a space simulator to test my knowledge. This isn't a full scale simulator, but just something that covers everything I learned. It's also going to be modular so I can build on it, after I get the basics down. One of the early features I want to implement is AI. And I want to take this into account as I'm designing my classes so I can minimize rewriting code. So my question: How should I design ship classes so that both the player and AI can use them? The only idea I have so far is: Create a ship class that contains stats, models, textures, collision data etc. The player and AI would then have the data for position, rotation, health, etc and would base their status off of the ship stats.

  Read the article

• Setting Krypton Light to Screen Pixels

  - by Adam Jerrett

  So a few days back, I started playing around with Krypton XNA for 2D lighting in my game. I noticed in general, that spawning a light at (0,0) with Krypton causes the light to appear in, pretty much, the centre of the game screen. Is there any way to change this so a Krypton light's "starting point" at [0,0] would spawn at the top left of the screen, and thus follow the standard screen co-ordinates for position? I ask because currently I'm busy working on my game where my spawn point is [512,512]. With hard code, the closest I've got to the light being "central" to this point is the vector position [12,-20], which makes no sense and is impossible to craft, mathematically, if I want the light to move with the camera (the position [480,512] maps roughly to [10,-20]). So, is there any way to "normalise" the krypton lights to use standard screen co-ordinates? If you guys can, play around with the demo from the site and please see if you can find anything out about it. Documentation on the engine is rather scarce, so it's difficult to find anything relevant to my "pixel-perfect" need. It might just also be something in the code with regards to the matrices that I'm not fully understanding. Any help would be useful. Thanks.

  Read the article

• Creating an update method in a different class

  - by Sweta Dwivedi

  I have created a class called 3D model which will animate my 3D model by changing the model position according to the values based in a .txt file through a list... Since i'm using a foreach loop to read the point values when it reaches the end of the file.. XNA throws an out of bounds exception .. (which is obvious) but if i add the same code in my Game.cs update(gameTime) method.. then i dont have this problem..Any idea how to make my 3D model update work same as the update in game.cs .. Here is the code for some idea: public void patterns(GameTime gameTime) { motion_z = new List<Point3D>(); if (pattern == 1) { f = "E:/Motion_Track-output/Output1.txt"; } if (pattern == 2) { f = "E:/Motion_Track-output/cruse.txt"; } // TODO: Add your update logic here using (StreamReader r = new StreamReader(f)) { string line; //Viewport view = graphics.GraphicsDevice.Viewport; int maxWidth = view.Width; int maxHeight = view.Height; while ((line = r.ReadLine()) != null) { string[] temp = line.Split(','); int x = (int)Math.Floor(((float.Parse(temp[0]) * 0.5f) + 0.5f) * maxWidth); int y = (int)Math.Floor(((float.Parse(temp[1]) * -0.5f) + 0.5f) * maxHeight); int z = (int)Math.Floor(((float.Parse(temp[2]) / 4 * 20000))); motion_z.Add(new Point3D(x, y, z)); } modelPosition.X = (float)(motion_z[i].X); modelPosition.Y = (float)(motion_z[i].Y); modelPosition.Z = (float)(motion_z[i].Z); i++; } //Console.WriteLine("modelposX:" + modelPosition.X + "," + "motionzX:" + motion_z[i].X); }

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >