Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 330/1213 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

  • Ubuntu 12.04 Server ping gateway responds with destination host unreachable

    - by blckblttkd
    I consider myself fairly avid with Ubuntu and Linux, but this one has me stumped. I built up a Xen Server using Ubuntu 12.04 as the base operating system. It has multiple domUs running on it. My home network has a statically defined network where I got all the network connectivity going peachy. The server was moved to a permanent home this morning. So, the network configuration on the main system had to change. Again, another static network, but now I can't ping the upstream gateway from the host. As the VMs use this NIC over a bridge, they too are broken. Ping responds with "destination host unreachable." I simplified the networking down to a simple static network as seen below (no bridge or anything) just to get it to work. Here's the contents of my /etc/network/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 216.7.188.228 gateway 216.7.188.225 netmask 255.255.255.240 broadcast 216.7.188.255 network 216.7.188.0 dns-nameservers 8.8.8.8 8.8.4.4 Here's the contents of route -n 0.0.0.0 216.7.188.225 0.0.0.0 UG 100 0 0 eth0 216.7.188.224 0.0.0.0 255.255.255.240 U 0 0 0 eth0 And the results of pinging the gateway: PING 216.7.188.225 (216.7.188.225) 56(84) bytes of data. From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable Again, this worked in one network flawlessly (obviously with different parameters in the interfaces file). I did try using eth1 (as there are two NICS on the server (in case the MAC address got flipped on bootup). No success there. Yes, the cable is in the right port now :) Any thoughts? I appreciate the help!

    Read the article

  • How do I fix DNS resolving which doesn't work after upgrading to Ubuntu 13.10 (Saucy)

    - by Witek
    After upgrade to 13.10 my DNS resolving fails. It seams the DNS servers which I get by DHCP (LAN) are not used. I could temporary solve the problem by adding nameserver 8.8.8.8 to /etc/resolv.conf. But then the intranet hosts still can not be resolved. When clicking on the Connection Information menu item on the network indicator, the Primary DNS and the Secondary DNS are set correctly. But my computer seams not to use them. So my questions: What should I put into resolv.conf, if anything? How to find out, which name servers my computer is querying? Where to look next, to find out, why name servers received by DHCP are not used?

    Read the article

  • Audio codec consuming high battery power

    - by Vamsi Emani
    My powertop reports this for the two audio codec components. 4.85 W 100.0% Device Audio codec hwC0D3: Intel 4.85 W 100.0% Device Audio codec hwC0D0: Realtek I think 10 W for audio is too high. Can somebody please suggest me a way to reduce the power consumption? It'd be nice if someone could educate me on this, I have an idea about codecs in general but I have no clue about their internals? Why is it that these two components keep running always even when I am not listening to audio?

    Read the article

  • Installer says I'd need a wireless firmware, but WLAN works without it out of the box

    - by unor
    While installing 12.04.01 (Alternate) on a netbook (Samsung N150Plus), Ubuntu informed me that I'd need the firmware brcm/bcm43xx-0.fw. I skipped this step. If I understand this page correctly, the mentioned firmware is a WLAN driver. However, after the Ubuntu installation was completed, the WLAN worked out of the box. After a few minutes, Ubuntu informed me that there is a firmware update available, which would be the mentioned firmware. Do I need to install this? Is Ubuntu using some kind of "lite" WLAN driver and I might run into problems with certain networks in the future, if I don't use the firmware? Would there be benefits in using the firmware? (maybe longer runtime because of lower consumption?)

    Read the article

  • still getting 403 on apt-get install: no proxy, urls seems valid

    - by Berry Tsakala
    i'm trying to install libreoffice (or openoffice) on Ubuntu server 12.10, the packages exist - verified with "apt-cache search", the file /etc/apt/apt.conf.d/30proxy doesn't exist on my system the text 'proxy' isn't mention in grep proxy /etc/apt/apt.conf.d/ other packages that i tried to apt-get-install -- are installed OK. the only thing i haven't done is to replace the respository servers; i'm afraid it can break the dpkg system! related questions http://askubuntu.com/questions/304340/apt-get-403-forbidden?rq=1 http://askubuntu.com/questions/303150/apt-get-403-forbidden-but-accessible-in-the-browser http://askubuntu.com/questions/409998/proxy-blocking-apt-get-allowing-wget-curl http://askubuntu.com/questions/367737/apt-get-upgrade-gives-403-forbidden-error?rq=1 What else can I do to solve this 403 error and install liber/open-office using apt?

    Read the article

  • Another guvcview issue? Core dump!

    - by user290498
    guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

    Read the article

  • Compiling C++ code with mingw under 12.04

    - by golemit
    I tried to setting up compiling of the C++ projects under my Ubuntu 12.04 by mingw with QT libraries. The idea was to get executable independent from variations of target Windows versions and development environments of my colleagues. It was successfully implemented under OpenSuse 12.2 with mingw32 and some additional libraries including mingw32-libqt4 and some others. Fine. However when trying to do the same under Ubuntu 12.04 with mingw-w64 including latest libraries QT-4.8.3 copied from Windows there were always errors. No luck. The typical errors in these attempts can be seen in attachments. The commands used: qmake -spec /path_to_my_conf/win32-x-g++ my_project.pro make Can someone give a hint of the problem source? I would appreciate a good advice. Serge some exctracts from LOG: ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0xec): undefined reference to `QDialog::accept()' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0xf0): undefined reference to `QDialog::reject()' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x104): undefined reference to `non-virtual thunk to QWidget::devType() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x108): undefined reference to `non-virtual thunk to QWidget::paintEngine() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x10c): undefined reference to `non-virtual thunk to QWidget::getDC() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x110): undefined reference to `non-virtual thunk to QWidget::releaseDC(HDC__*) const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x114): undefined reference to `non-virtual thunk to QWidget::metric(QPaintDevice::PaintDeviceMetric) const' ./.obj/qrc_images.o:qrc_images.cpp:(.text+0x24): undefined reference to `__imp___Z21qRegisterResourceDataiPKhS0_S0_' ./.obj/qrc_images.o:qrc_images.cpp:(.text+0x64): undefined reference to `__imp___Z23qUnregisterResourceDataiPKhS0_S0_' collect2: ld returned 1 exit status

    Read the article

  • No Android SDK, neither Java found

    - by Alex
    I have Java installed correctly, I did it by the manual http://www.wikihow.com/Install-Oracle-Java-on-Ubuntu-Linux I also installed Android SDK. However when I try to create a new Project IntelliJ Idea 12 and specify Project SDk choosing New - /home/alex/android-sdk-linux , it says me No Java SDK of appropriate version found. In addition to the Android SDK, you need to define a JSDK 1.5, 1.6 or 1.7 What did I miss?

    Read the article

  • atkbd.c spamming the logs. How to get rid? what is this?

    - by turbo
    On my Vostro 1000 notebook the following messages spam my dmesg: [18678.728936] atkbd.c: Unknown key released (translated set 2, code 0x8d on isa0060/serio0). [18678.728941] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18679.831109] atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [18679.831119] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18679.841607] atkbd.c: Unknown key released (translated set 2, code 0x8d on isa0060/serio0). [18679.841615] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18680.901733] atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [18680.901744] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18680.911536] atkbd.c: Unknown key released (translated set 2, code 0x8d on isa0060/serio0). [18680.911546] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. It's most probably not from an actual key because it appears in regular intervals. First what is it? It could be my battery since it's nearly dead, as in loadable to 11 % of the initial capacity, but I have no evidence for that. What is this / how can I find out where this comes from? How can I get rid of it? Is there a 'dud' keycode? When I assign a keycode with sudo setkeycode e00d $(random keycode) the key does actually get pressed. That makes it impossible to enter sudo password for example. So any 'real' keycode is not an option. It hasn't been like that half a year ago. Even better than the dud keycode would be a real fix. It happens from 10.04 to 12.04 (before that I don't know). I did read zcat /usr/share/doc/udev/README.keymap.txt.gz |less as suggested in the Ubuntu Wiki. /lib/udev/findkeyboards && sudo /lib/udev/keymap -i input/event5 produces what appears to be newlines in rapid succession. sudo udevadm monitor doesn't show the event.

    Read the article

  • Broken BURG install after backup/restore

    - by WindowsEscapist
    Long story short: BURG is stuck in text mode and I can't seem to get it back to the eye-candy. I have purged and then re-installed to no avail. I am running 12.04. The long story: I originally installed onto 12.04 using Super-boot-manager (BURG-manager) and then stopped using it in favour of GRUB because I had too many entries. I then had to backup and restore Ubuntu (partition was deleted and re-created) due to unrelated issues. I re-installed GRUB2 and booted into Ubuntu to re-install BURG, but after re-booting it appears to be stuck in text mode (looks exactly like GRUB 1). Any ideas? I know I'm not supposed to be using it on 12.04 (I think) but it worked before, so what's up?

    Read the article

  • How to upgrade Compiz to 0.9.8 in 12.04?

    - by Naveen
    For a very long time, I'm experiencing this bug in Compiz. It makes my windows flash, when rotating the desktop cube. None of the animations work properly execpt the Wobbly windows. However the temporary fix I found on the bug page helped me to reduce the effects, but it's not 100% perfect. Now they have totally fixed the bug in Compiz 0.9.8 for Quantal. I really need to get the official fix on my Ubuntu 12.04. Don't the LTS versions get bug fixes? Sometimes my desktop cube/cylinder appears like this : None of this happened in Lucid Lynx :( Thanks for having a look.....

    Read the article

  • Proprietary Driver missing after Kernel upgrade

    - by Chris
    I recently upgraded my kernel to the Linux 3.4 kernel. Upon doing so, I found that it zapped my proprietary driver for my graphics card. As an alternative, I had saved Catalyst 12.8, but now it will not open through Software Center. I tried several other terminal methods, but it seems that many of these postings are bunk. They only work until you're almost done and then you get errors. I just need a little help from somebody who has been there, as I am new to Ubuntu. I'm kind of afraid to reboot because this is my 3rd full load of Ubuntu. Any ideas?

    Read the article

  • Is it possible to run the GNOME user manager from XFCE4?

    - by Chris Moore
    If I run 'gnome-control-center' and click on the 'User Accounts' icon, the gnome-control-center crashes. I built it from source to see what's going on, and it turns out it's doing a if (strcmp(getenv("XDG_CURRENT_DESKTOP"), "GNOME")) in panels/user-accounts/um-password-dialog.c, line 690. I don't have an environment variable "XDG_CURRENT_DESKTOP", so the getenv is returning NULL, and the strcmp is segfaulting Where is XDG_CURRENT_DESKTOP meant to be defined? And shouldn't gnome-control-center check the pointer returned by getenv before passing it to strcmp? Does xfce4 have its own 'User Accounts' tool for creating new users?

    Read the article

  • How do I get Poulsbo (GMA500) drivers to work?

    - by slayerman
    I'm trying to get working the Poulbo driver under Ubuntu 9.10. I've installed poulsbo-driver-2d poulsbo-driver-3d poulsbo-config packages from sudo add-apt-repository ppa:gma500/ppa. The packages installation is working. After I have to put in xorg.conf driver "psb". Then I reboot and I have no more display. I have to switch back to vesa in order to display back. Can someone give me some kind of solution?

    Read the article

  • Panel Background color, Transparency and background image don't work with Ambiance theme

    - by Ash G
    As the title suggests. Selecting a background image, color or using the transparency sitting doesn't work with the Ambiance theme. Sections of the panel will take the new settings, but many of the applets including the clock, Indicator Applet Session, Indicator Applet, Rhythmbox icon, Tomboy Icon, Separators and various others retain the Ambiance theme background. This carries over through restart. Also you cannot resize the panel in Ambiance above 24 pixels as the background image doesn't scale. Am I doing something wrong, is it a bug or is it meant to be like that? I really like Ambiance, but am having a hard time using it because of these issues Edit: It seems these issues carry over to Radiance and New Wave as well

    Read the article

  • Broadcom wireless card disappeards on restart

    - by Kristian Jones
    I used 'additional drivers' to install 'Broadcom STA wireless driver' and it returns an error. WIthin jockey.log it says the following numerous times. 2011-02-14 21:24:06,945 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted After it returns the error the network card will work temporarily until I restart the laptop. When I restart I got to go through the procedure again of trying to activate the driver, returns an error however it works temporarily. The network card is as follows on a Dell Inspiron 1545: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] Rev 01 I have been trying to solve this myself for many hours. Any help is appreciated/

    Read the article

  • "failed to download package files" in VirtualBox with 11.04 and 11.10

    - by wang.xueqiang
    After I installed Ubuntu 11.04/11.10 in VirtualBox in Windows 7, I cannot update any software with the error message "failed to download package files". After having googled, I have tried: sudo apt-get update sudo apt-get upgrade changed to another sources But I still got the same error message. And there is no problem with internet connection as i can connect to internet using Firefox in Ubuntu. Any ideas?

    Read the article

  • Installation of 11.10 on new drive (no OS)

    - by Jeffrey Vincent
    I have a Dell Dimension 600 XPS Phoenix BIOS version A03, the original HD crashed and burned. Dell didn't send OS disks (was on the original drive and no back up disks), so I am trying to install Ubuntu 11.10 on the new drive. The new drive is a Western Digital 1TB. I formatted the new drive by putting it in an enclosure and formatting it with Windows 7 on my HP system. When I put the cd in the cdrom it boots to the cd with the Advanced user screen (won't boot into the usually Windows GUI). When I try to install (or run from live Cd) I get the same error message. Same with trying the various boot options. The message is: VFS: cannot open root device "(NULL)" or unknown-block(8,1) Please append a correct "root=" boot option: Here are the available partitions: Kernal Panic- not syncing: VFS: Unable to mount rootfs on unknown-block(8,1) and then it lists Trace messages then freezing. Any help or suggestions are appreciated in advance.

    Read the article

  • How can I install the Unity Photo Lens

    - by Chuqui
    I can't install the Photo Lens. After running these commands: sudo add-apt-repository ppa:scopes-packagers/ppa sudo apt-get update && sudo apt-get install unity-lens-photo unity-scope-shotwell unity-scope-flickr I get this: Package unity-lens-photo is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'unity-lens-photo' has no installation candidate Is there a fix for that? Thank you very much.

    Read the article

  • locale: Reset lost settings

    - by Adam Matan
    Due to some strange reason, I've lost some of my locale settings. I've managed to restore most of them using sudo dpkg-reconfigure locales: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory So I'm stuck with one missing value: $ locale locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory LANG=en_US.UTF-8 LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= Any idea how to restore them all? Thanks, Adam

    Read the article

  • Few problems on Dell xps 15 L502 (screen brightness ,blutooth,wi-fi power management problems)

    - by Web-E
    I am running ubuntu 11.10 32bit in my dell xps L502. Working good except few problems. Blue tooth always turned on reboot,I would like to turn it off always. Screen brightness is not saved.Every time I reboot, the screen goes back to full brightness.How to save that? and the most important problem is internet speed through wi-fi is really very slow when operating on battery.the card is intel centrino Advanced-N 1030 with integrated blue tooth. Any help will be appriciated... :)

    Read the article

  • Ubuntu and Surface Pro, wifi issues not fixed?

    - by Confused or too stupid
    Just a quick question, from the numerous other threads I found, is the wifi still a no go straight out of installing Ubuntu? I tried this Dual boot Surface Pro with Ubuntu? with 13.04, the wifi is sporadic in working. From that and other threads I gathered that 13.10 would include the fix, so I tossed that onto the Surface as well, with the same results. Is there anything I am missing? Is there any other distro that has better luck with the Marvell chip?

    Read the article

  • Multi Seat Ubuntu 10.10

    - by JJ Mcfly
    Hi I was hoping to have a 2 seat setup. One will be for my TV just going to run Boxee. The other is for my main Desktop. I've been looking for a good guide to help me navigate this, I'd like to use ubuntu 10.10. I am assuming it's just a case of getting a box + 2 graphics adaptors and 2 usb mice and keyboards, one of which will be bluetooth for the TV. I can't seem to find much documentation on this idea. Can anyone point me in the right direction? Also I am assuming that this is all possible with a standard ubuntu install, but with some additional configuration. Thank you in advance for any advice you can offer me JJ Mcfly

    Read the article

  • Cannot install vim

    - by Max Popp
    I am running ubuntu 11.10, as xubuntu, in an amd64 pc, configured as dual boot with win7 . I tried installing vim with this: sudo apt-get install vim I got these error message: "The following packages have unmet dependencies: vim : Depends: vim-common (= 2:7.3.154+hg~74503f6ee649-2ubuntu2) but 2:7.3.154+hg~74503f6ee649-2ubuntu3 is to be installed E: Unable to correct problems, you have held broken packages." I only have a very faint idea of what the problem is, and none whatsoever on how to correct this. Hope you guys can help. Thanks

    Read the article

  • System does not detect USB pendrives

    - by cshubhamrao
    This USB thing is driving me crazy. 2 problems in time span of 3 hours. Ok I was already trying to cope up with "wrong fs type, bad option, bad superblock" error while mounting FAT Drives when to my amazement I discovered that none of the USB Storage devices showed up in the system Useful outputs: - tail /var/log/syslog: root@shubham-pc:~# tail /var/log/syslog Nov 7 21:41:47 shubham-pc colord: device removed: sysfs-HP-v250w Nov 7 21:41:51 shubham-pc kernel: [ 3441.529542] usb 1-1: USB disconnect, device number 11 Nov 7 21:41:53 shubham-pc kernel: [ 3443.820029] usb 1-2: new high-speed USB device number 14 using ehci-pci Nov 7 21:41:54 shubham-pc kernel: [ 3443.952897] usb 1-2: New USB device found, idVendor=0781, idProduct=5530 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952905] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952909] usb 1-2: Product: Cruzer Nov 7 21:41:54 shubham-pc kernel: [ 3443.952913] usb 1-2: Manufacturer: SanDisk Nov 7 21:41:54 shubham-pc kernel: [ 3443.952917] usb 1-2: SerialNumber: 20060876420EC6016847 Nov 7 21:41:54 shubham-pc mtp-probe: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2" Nov 7 21:41:54 shubham-pc mtp-probe: bus: 1, device: 14 was not an MTP device

    Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >