Search Results

Search found 8790 results on 352 pages for 'known hosts'.

Page 330/352 | < Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >

• Using SQL Source Control with Fortress or Vault &ndash; Part 2

  - by AjarnMark

  In Part 1, I started talking about using Red-Gate’s newest version of SQL Source Control and how I really like it as a viable method to source control your database development.  It looks like this is going to turn into a little series where I will explain how we have done things in the past, and how life is different with SQL Source Control.  I will also explain some of my philosophy and methodology around deployment with these tools.  But for now, let’s talk about some of the good and the bad of the tool itself. More Kudos and Features I mentioned previously how impressed I was with the responsiveness of Red-Gate’s team.  I have been having an ongoing email conversation with Gyorgy Pocsi, and as I have run into problems or requested things behave a little differently, it has not been more than a day or two before a new Build is ready for me to download and test.  Quite impressive! I’m sure much of the requests I put in were already in the plans, so I can’t really take credit for them, but throughout this conversation, Red-Gate has implemented several features that were not in the first Early Access version.  Those include: Honoring the Fortress configuration option to require Work Item (Bug) IDs on check-ins. Adding the check-in comment text as a comment to the Work Item. Adding the list of checked-in files, along with the Fortress links for automatic History and DIFF view Updating the status of a Work Item on check-in (e.g. setting the item to Complete or, in our case “Dev-Complete”) Support for the Fortress 2.0 API, and not just the Vault Pro 5.1 API.  (See later notes regarding support for Fortress 2.0). These were all features that I felt we really needed to have in-place before I could honestly consider converting my team to using SQL Source Control on a regular basis.  Now that I have those, my only excuse is not wanting to switch boats on the team mid-stream.  So when we wrap up our current release in a few weeks, we will make the jump.  In the meantime, I will continue to bang on it to make sure it is stable.  It passed one test for stability when I did a test load of one of our larger database schemas into Fortress with SQL Source Control.  That database has about 150 tables, 200 User-Defined Functions and nearly 900 Stored Procedures.  The initial load to source control went smoothly and took just a brief amount of time. Warnings Remember that this IS still in pre-release stage and while I have not had any problems after that first hiccup I wrote about last time, you still need to treat it with a healthy respect.  As I understand it, the RTM is targeted for February.  There are a couple more features that I hope make it into the final release version, but if not, they’ll probably be coming soon thereafter.  Those are: A Browse feature to let me lookup the Work Item ID instead of having to remember it or look back in my Item details.  This is just a matter of convenience. I normally have my Work Item list open anyway, so I can easily look it up, but hey, why not make it even easier. A multi-line comment area.  The current space for writing check-in comments is a single-line text box.  I would like to have a multi-line space as I sometimes write lengthy commentary.  But I recognize that it is a struggle to get most developers to put in more than the word “fixed” as their comment, so this meets the need of the majority as-is, and it’s not a show-stopper for us. Merge.  SQL Source Control currently does not have a Merge feature.  If two or more people make changes to the same database object, you will get a warning of the conflict and have to choose which one wins (and then manually edit to include the others’ changes).  I think it unlikely you will run into actual conflicts in Stored Procedures and Functions, but you might with Views or Tables.  This will be nice to have, but I’m not losing any sleep over it.  And I have multiple tools at my disposal to do merges manually, so really not a show-stopper for us. Automation has its limits.  As cool as this automation is, it has its limits and there are some changes that you will be better off scripting yourself.  For example, if you are refactoring table definitions, and want to change a column name, you can write that as a quick sp_rename command and preserve the data within that column.  But because this tool is looking just at a before and after picture, it cannot tell that you just renamed a column.  To the tool, it looks like you dropped one column and added another.  This is not a knock against Red-Gate.  All automated scripting tools have this issue, unless the are actively monitoring your every step to know exactly what you are doing.  This means that when you go to Deploy your changes, SQL Compare will script the change as a column drop and add, or will attempt to rebuild the entire table.  Unfortunately, neither of these approaches will preserve the existing data in that column the way an sp_rename will, and so you are better off scripting that change yourself.  Thankfully, SQL Compare will produce warnings about the potential loss of data before it does the actual synchronization and give you a chance to intercept the script and do it yourself. Also, please note that the current official word is that SQL Source Control supports Vault Professional 5.1 and later.  Vault Professional is the new name for what was previously known as Fortress.  (You can read about the name change on SourceGear’s site.)  The last version of Fortress was 2.x, and the API for Fortress 2.x is different from the API for Vault Pro.  At my company, we are currently running Fortress 2.0, with plans to upgrade to Vault Pro early next year.  Gyorgy was able to come up with a work-around for me to be able to use SQL Source Control with Fortress 2.0, even though it is not officially supported.  If you are using Fortress 2.0 and want to use SQL Source Control, be aware that this is not officially supported, but it is working for us, and you can probably get the work-around instructions from Red-Gate if you’re really, really nice to them. Upcoming Topics Some of the other topics I will likely cover in this series over the next few weeks are: How we used to do source control back in the old days (a few weeks ago) before SQL Source Control was available to Vault users What happens when you restore a database that is linked to source control Handling multiple development branches of source code Concurrent Development practices and handling Conflicts Deployment Tips and Best Practices A recap after using the tool for a while

  Read the article

• EM12c Release 4: Cloud Control to Major Tom...

  - by abulloch

  With the latest release of Enterprise Manager 12c, Release 4 (12.1.0.4) the EM development team has added new functionality to assist the EM Administrator to monitor the health of the EM infrastructure.   Taking feedback delivered from customers directly and through customer advisory boards some nice enhancements have been made to the “Manage Cloud Control” sections of the UI, commonly known in the EM community as “the MTM pages” (MTM stands for Monitor the Monitor).  This part of the EM Cloud Control UI is viewed by many as the mission control for EM Administrators. In this post we’ll highlight some of the new information that’s on display in these redesigned pages and explain how the information they present can help EM administrators identify potential bottlenecks or issues with the EM infrastructure. The first page we’ll take a look at is the newly designed Repository information page.  You can get to this from the main Setup menu, through Manage Cloud Control, then Repository.  Once this page loads you’ll see the new layout that includes 3 tabs containing more drill-down information. The Repository Tab The first tab, Repository, gives you a series of 6 panels or regions on screen that display key information that the EM Administrator needs to review from time to time to ensure that their infrastructure is in good health. Rather than go through every panel let’s call out a few and let you explore the others later yourself on your own EM site.  Firstly, we have the Repository Details panel. At a glance the EM Administrator can see the current version of the EM repository database and more critically, three important elements of information relating to availability and reliability :- Is the database in Archive Log mode ? Is the database using Flashback ? When was the last database backup taken ? In this test environment above the answers are not too worrying, however, Production environments should have at least Archivelog mode enabled, Flashback is a nice feature to enable prior to upgrades (for fast rollback) and all Production sites should have a backup.  In this case the backup information in the Control file indicates there’s been no recorded backups taken. The next region of interest to note on this page shows key information around the Repository configuration, specifically, the initialisation parameters (from the spfile). If you’re storing your EM Repository in a Cluster Database you can view the parameters on each individual instance using the Instance Name drop-down selector in the top right of the region. Additionally, you’ll note there is now a check performed on the active configuration to ensure that you’re using, at the very least, Oracle minimum recommended values.  Should the values in your EM Repository not meet these requirements it will be flagged in this table with a red X for non-compliance.  You can of-course change these values within EM by selecting the Database target and modifying the parameters in the spfile (and optionally, the run-time values if the parameter allows dynamic changes). The last region to call out on this page before moving on is the new look Repository Scheduler Job Status region. This region is an update of a similar region seen on previous releases of the MTM pages in Cloud Control but there’s some important new functionality that’s been added that customers have requested. First-up - Restarting Repository Jobs.  As you can see from the graphic, you can now optionally select a job (by selecting the row in the UI table element) and click on the Restart Job button to take care of any jobs which have stopped or stalled for any reason.  Previously this needed to be done at the command line using EMDIAG or through a PL/SQL package invocation.  You can now take care of this directly from within the UI. Next, you’ll see that a feature has been added to allow the EM administrator to customise the run-time for some of the background jobs that run in the Repository.  We heard from some customers that ensuring these jobs don’t clash with Production backups, etc is a key requirement.  This new functionality allows you to select the pencil icon to edit the schedule time for these more resource intensive background jobs and modify the schedule to avoid clashes like this. Moving onto the next tab, let’s select the Metrics tab. The Metrics Tab There’s some big changes here, this page contains new information regions that help the Administrator understand the direct impact the in-bound metric flows are having on the EM Repository.  Many customers have provided feedback that they are in the dark about the impact of adding new targets or large numbers of new hosts or new target types into EM and the impact this has on the Repository.  This page helps the EM Administrator get to grips with this.  Let’s take a quick look at two regions on this page. First-up there’s a bubble chart showing a comprehensive view of the top resource consumers of metric data, over the last 30 days, charted as the number of rows loaded against the number of collections for the metric.  The size of the bubble indicates a relative volume.  You can see from this example above that a quick glance shows that Host metrics are the largest inbound flow into the repository when measured by number of rows.  Closely following behind this though are a large number of collections for Oracle Weblogic Server and Application Deployment.  Taken together the Host Collections is around 0.7Mb of data.  The total information collection for Weblogic Server and Application Deployments is 0.38Mb and 0.37Mb respectively. If you want to get this information breakdown on the volume of data collected simply hover over the bubble in the chart and you’ll get a floating tooltip showing the information. Clicking on any bubble in the chart takes you one level deeper into a drill-down of the Metric collection. Doing this reveals the individual metric elements for these target types and again shows a representation of the relative cost - in terms of Number of Rows, Number of Collections and Storage cost of data for each Metric type. Looking at another panel on this page we can see a different view on this data. This view shows a view of the Top N metrics (the drop down allows you to select 10, 15 or 20) and sort them by volume of data.  In the case above we can see the largest metric collection (by volume) in this case (over the last 30 days) is the information about OS Registered Software on a Host target. Taken together, these two regions provide a powerful tool for the EM Administrator to understand the potential impact of any new targets that have been discovered and promoted into management by EM12c.  It’s a great tool for identifying the cause of a sudden increase in Repository storage consumption or Redo log and Archive log generation. Using the information on this page EM Administrators can take action to mitigate any load impact by deploying monitoring templates to the targets causing most load if appropriate.   The last tab we’ll look at on this page is the Schema tab. The Schema Tab Selecting this tab brings up a window onto the SYSMAN schema with a focus on Space usage in the EM Repository.  Understanding what tablespaces are growing, at what rate, is essential information for the EM Administrator to stay on top of managing space allocations for the EM Repository so that it works as efficiently as possible and performs well for the users.  Not least because ensuring storage is managed well ensures continued availability of EM for monitoring purposes. The first region to highlight here shows the trend of space usage for the tablespaces in the EM Repository over time.  You can see the upward trend here showing that storage in the EM Repository is being consumed on an upward trend over the last few days here. This is normal as this EM being used here is brand new with Agents being added daily to bring targets into monitoring.  If your Enterprise Manager configuration has reached a steady state over a period of time where the number of new inbound targets is relatively small, the metric collection settings are fairly uniform and standardised (using Templates and Template Collections) you’re likely to see a trend of space allocation that plateau’s. The table below the trend chart shows the Top 20 Tables/Indexes sorted descending by order of space consumed.  You can switch the trend view chart and corresponding detail table by choosing a different tablespace in the EM Repository using the drop-down picker on the top right of this region. The last region to highlight on this page is the region showing information about the Purge policies in effect in the EM Repository. This information is useful to illustrate to EM Administrators the default purge policies in effect for the different categories of information available in the EM Repository.  Of course, it’s also been a long requested feature to have the ability to modify these default retention periods.  You can also do this using this screen.  As there are interdependencies between some data elements you can’t modify retention policies on a feature by feature basis.  Instead, retention policies take categories of information and bundles them together in Groups.  Retention policies are modified at the Group Level.  Understanding the impact of this really deserves a blog post all on it’s own as modifying these can have a significant impact on both the EM Repository’s storage footprint and it’s performance.  For now, we’re just highlighting the features visibility on these new pages. As a user of EM12c we hope the new features you see here address some of the feedback that’s been given on these pages over the past few releases.  We’ll look out for any comments or feedback you have on these pages ! 

  Read the article

• Using Table-Valued Parameters in SQL Server

  - by Jesse

  I work with stored procedures in SQL Server pretty frequently and have often found myself with a need to pass in a list of values at run-time. Quite often this list contains a set of ids on which the stored procedure needs to operate the size and contents of which are not known at design time. In the past I’ve taken the collection of ids (which are usually integers), converted them to a string representation where each value is separated by a comma and passed that string into a VARCHAR parameter of a stored procedure. The body of the stored procedure would then need to parse that string into a table variable which could be easily consumed with set-based logic within the rest of the stored procedure. This approach works pretty well but the VARCHAR variable has always felt like an un-wanted “middle man” in this scenario. Of course, I could use a BULK INSERT operation to load the list of ids into a temporary table that the stored procedure could use, but that approach seems heavy-handed in situations where the list of values is usually going to contain only a few dozen values. Fortunately SQL Server 2008 introduced the concept of table-valued parameters which effectively eliminates the need for the clumsy middle man VARCHAR parameter. Example: Customer Transaction Summary Report Let’s say we have a report that can summarize the the transactions that we’ve conducted with customers over a period of time. The report returns a pretty simple dataset containing one row per customer with some key metrics about how much business that customer has conducted over the date range for which the report is being run. Sometimes the report is run for a single customer, sometimes it’s run for all customers, and sometimes it’s run for a handful of customers (i.e. a salesman runs it for the customers that fall into his sales territory). This report can be invoked from a website on-demand, or it can be scheduled for periodic delivery to certain users via SQL Server Reporting Services. Because the report can be created from different places and the query to generate the report is complex it’s been packed into a stored procedure that accepts three parameters: @startDate – The beginning of the date range for which the report should be run. @endDate – The end of the date range for which the report should be run. @customerIds – The customer Ids for which the report should be run. Obviously, the @startDate and @endDate parameters are DATETIME variables. The @customerIds parameter, however, needs to contain a list of the identity values (primary key) from the Customers table representing the customers that were selected for this particular run of the report. In prior versions of SQL Server we might have made this parameter a VARCHAR variable, but with SQL Server 2008 we can make it into a table-valued parameter. Defining And Using The Table Type In order to use a table-valued parameter, we first need to tell SQL Server about what the table will look like. We do this by creating a user defined type. For the purposes of this stored procedure we need a very simple type to model a table variable with a single integer column. We can create a generic type called ‘IntegerListTableType’ like this: CREATE TYPE IntegerListTableType AS TABLE (Value INT NOT NULL) Once defined, we can use this new type to define the @customerIds parameter in the signature of our stored procedure. The parameter list for the stored procedure definition might look like: 1: CREATE PROCEDURE dbo.rpt_CustomerTransactionSummary 2: @starDate datetime, 3: @endDate datetime, 4: @customerIds IntegerListTableTableType READONLY   Note the ‘READONLY’ statement following the declaration of the @customerIds parameter. SQL Server requires any table-valued parameter be marked as ‘READONLY’ and no DML (INSERT/UPDATE/DELETE) statements can be performed on a table-valued parameter within the routine in which it’s used. Aside from the DML restriction, however, you can do pretty much anything with a table-valued parameter as you could with a normal TABLE variable. With the user defined type and stored procedure defined as above, we could invoke like this: 1: DECLARE @cusomterIdList IntegerListTableType 2: INSERT @customerIdList VALUES (1) 3: INSERT @customerIdList VALUES (2) 4: INSERT @customerIdList VALUES (3) 5:  6: EXEC dbo.rpt_CustomerTransationSummary 7: @startDate = '2012-05-01', 8: @endDate = '2012-06-01' 9: @customerIds = @customerIdList   Note that we can simply declare a variable of type ‘IntegerListTableType’ just like any other normal variable and insert values into it just like a TABLE variable. We could also populate the variable with a SELECT … INTO or INSERT … SELECT statement if desired. Using The Table-Valued Parameter With ADO .NET Invoking a stored procedure with a table-valued parameter from ADO .NET is as simple as building a DataTable and passing it in as the Value of a SqlParameter. Here’s some example code for how we would construct the SqlParameter for the @customerIds parameter in our stored procedure: 1: var customerIdsParameter = new SqlParameter(); 2: customerIdParameter.Direction = ParameterDirection.Input; 3: customerIdParameter.TypeName = "IntegerListTableType"; 4: customerIdParameter.Value = selectedCustomerIds.ToIntegerListDataTable("Value");   All we’re doing here is new’ing up an instance of SqlParameter, setting the pamameters direction, specifying the name of the User Defined Type that this parameter uses, and setting its value. We’re assuming here that we have an IEnumerable<int> variable called ‘selectedCustomerIds’ containing all of the customer Ids for which the report should be run. The ‘ToIntegerListDataTable’ method is an extension method of the IEnumerable<int> type that looks like this: 1: public static DataTable ToIntegerListDataTable(this IEnumerable<int> intValues, string columnName) 2: { 3: var intergerListDataTable = new DataTable(); 4: intergerListDataTable.Columns.Add(columnName); 5: foreach(var intValue in intValues) 6: { 7: var nextRow = intergerListDataTable.NewRow(); 8: nextRow[columnName] = intValue; 9: intergerListDataTable.Rows.Add(nextRow); 10: } 11:  12: return intergerListDataTable; 13: }   Since the ‘IntegerListTableType’ has a single int column called ‘Value’, we pass that in for the ‘columnName’ parameter to the extension method. The method creates a new single-columned DataTable using the provided column name then iterates over the items in the IEnumerable<int> instance adding one row for each value. We can then use this SqlParameter instance when invoking the stored procedure just like we would use any other parameter. Advanced Functionality Using passing a list of integers into a stored procedure is a very simple usage scenario for the table-valued parameters feature, but I’ve found that it covers the majority of situations where I’ve needed to pass a collection of data for use in a query at run-time. I should note that BULK INSERT feature still makes sense for passing large amounts of data to SQL Server for processing. MSDN seems to suggest that 1000 rows of data is the tipping point where the overhead of a BULK INSERT operation can pay dividends. I should also note here that table-valued parameters can be used to deal with more complex data structures than single-columned tables of integers. A User Defined Type that backs a table-valued parameter can use things like identities and computed columns. That said, using some of these more advanced features might require the use the SqlDataRecord and SqlMetaData classes instead of a simple DataTable. Erland Sommarskog has a great article on his website that describes when and how to use these classes for table-valued parameters. What About Reporting Services? Earlier in the post I referenced the fact that our example stored procedure would be called from both a web application and a SQL Server Reporting Services report. Unfortunately, using table-valued parameters from SSRS reports can be a bit tricky and warrants its own blog post which I’ll be putting together and posting sometime in the near future.

  Read the article

• techniques for an AI for a highly cramped turn-based tactics game

  - by Adam M.

  I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

  Read the article

• CodePlex Daily Summary for Wednesday, March 31, 2010

  CodePlex Daily Summary for Wednesday, March 31, 2010New ProjectsBase Class Libraries: The Base Class Libraries site hosts samples, previews, and prototypes from the BCL team. BB Scheduler - BroadBand Scheduler: Broadband Scheduler is highly useful as it helps the user to set the time when the computer will automatically enable the Broadband (Internet) conn...BFBC2 PRoCon: BFBC2 PRoCon makes it easier for Bad Company 2 GSP's and private server owners to administer their BFBC2 servers. It's developed in C# and targete...Business Process Management Virtual Environment (BPMVE): This BPMVE project has been separated into 3 different projects. BPMVE_DataStructure project contains all data structures (classes and attribute...Business Rule Engine BizUnit Test Steps: Business Rule Engine BizUnit Test StepsCint: CintContent Edit Extender for Ajax.Net: The Content Edit Extender is an Ajax.Net control extender that allows in-place editing of a div tag (panel). Double-click to edit, hit enter or tab...COV Game: Cov game is a worms like game made on Silverlight with Python server.Cybera: A continuing development project of the existing but now generally inactive former Cybera project.DotNetCRM Community Edition: DotNetCRM Community Edition is an open source, enterprise class CRM built on the .NET platform. It is designed to be extensible, configurable, data...EAV: A sample EAV pattern for SQL Server with: Tables and indexes Partial referential integrity Partial data typing Updatable views (like normal SQL table)EditRegion.MVC: EditRegion.MVC may be all you want, when you do not want a full CMS. It allows html areas to be edited by nominated users or roles. The API follo...Firestarter Modeller: Firestarter ModellerHabanero.Testability: Habanero.TestabilityProSoft CMS: CMS System - scalable over an undeclared amount of servers - publishing services - version control of sitesPS-Blog.net: This is my first project here on codeplex. I would like to write my own blog software. Any comments or critcs are welcome.ReleaseMe: ReleaseMe is a simple little tool I use to copy websites, and custom Window Services, from my development machine to a specified production machin...SAAS-RD: SAAS-RD: uma ferrameta utilizada para prover integração de SaaS com aplicações externasSample Web Application using Telerik's OpenAccess ORM: Sample Web Site Application Project that uses Telerik's OpenAccess ORM for data access.Sistema Facturacion: En el proyecto de Sistema de Facturacion se desarrollara una aplicacion para el total control de un establecimiento comercial Smooth Habanero: Smooth HabaneroSouthEast Conference 2011: For the Florida Institute of Technology IEEE Chapter regarding the Southeast Hardware Conference held in Nashville, TN 2011.SQL Server Bible Standards: A SQL Server Design and Development standards document. SSAS Profiler Trace Scheduler: AS Profiler Scheduler is a tool that will enable Scheduling of SQL AS Tracing using predefined Profiler Templates. For tracking different issues th...Symbolic Algebra: Another attempt to make an algebric system but to be natively in C# under the .net framework. Theocratic Ministry School System: This is an Open Source Theocratic Ministry School System designed for Jehovah's Witnesses. It will include much of the same features as the TMS ver...Weather Report WebControls: The First Release Version:1.0.10330.2334WPF 3D Labyrinth: A project for "Design and Analysis of Computer Algorithms" subject at Kaunas University of Technology. Building a 3D labyrinth with a figure which ...WPF Zen Garden: This is intended to be a gallery for WPF Style sheets in the form of Css Zen Garden. New ReleasesAPSales CRM - Software as a Service: APSales 0.1.3: This version add some interesting features to the project: Implement "Filter By Additional Fields" in view edit Implement quick create function Im...Base Class Libraries: BigRational: BigRational builds on the BigInteger introduced in .NET Framework 4 to create an arbitrary-precision rational number type. A rational number is a ...Base Class Libraries: Long Path: The long path wrapper provides functionality to make it easier to work with paths that are longer than the current 259 character limit of the Syste...Base Class Libraries: PerfMonitor: PerfMonitor is a command-line tool for profiling the system using Event Tracing for Windows (ETW). PerfMonitor is built on top of the TraceEvent li...Base Class Libraries: TraceEvent: TraceEvent is an experimental library that greatly simplifies reading Event Tracing for Windows (ETW) events. It is used by the PerfMonitor tool. ...BB Scheduler - BroadBand Scheduler: Broadband Scheduler v2.0: - Broadband service has some of the cheap and best monthly plans for the users all over the nation. And some of the plans include unlimited night d...BuildTools - Toolset for automated builds: BuildTools 2.0 Mar 2010 Milestone: The Mar 2010 Milestone release is a contains a bug fixes for projects not explicitly setting the StartingDate property, and no longer breaks when t...Business Rule Engine BizUnit Test Steps: BRE BizUnit Test Steps Ver. 1.0: Version 1.0Claymore MVP: Claymore 1.1.0.0: Changelog Added Compact Framework support Added fluent interface to configure the library.Content Edit Extender for Ajax.Net: ContentEditExtender 1.0 for Ajax.Net: Complete with source control and test/example Website and Web Service. Built with Visual Studio 2008 with the 3.5 BCL. Control requires the AjaxCon...dylan.NET: dylan.NET v. 9.6: This stable version of the compiler for both .NET 3.5 and 4.0 adds the loading of numbers in a bult-in fashion. See code below: #refasm mscorlib...EAV: March 2010: The initial release as demoed at the SSWUG Virtual Conference Spring 2010Fax .NET: Fax .NET 1.0.1: FIX : bugs for x64 and WOW64 architecture. The zip file include : Binary file Demo executable file Help fileFluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.0 for NET 4.0 RC: Includes: Fluent.dll (with .pdb and .xml) compiled with .NET 4.0 RC Test application compiled with .NET 4.0 RC SourcesIceChat: IceChat 2009 Alpha 12.1 Full Install: Build Alpha 12.1 - March 30 2010 Fix Nick Name Change for Tabs/Server List for Queries Fix for running Channel List Multiple Times, clears list n...Import Excel data to SharePoint List: Import Data from Spreadsheet to SP List V1.5 x64: Import from Spreadsheet to a SharePoint List is the missing facet to the WSS 3.0 / MOSS 2007 List features. SharePoint lets a user create a custom...LINQ to Twitter: LINQ to Twitter Beta v2.0.9: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...mojoPortal: 2.3.4.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2341-released.aspxocculo: test: Release build for testers.PowerShell ToodleDo Module: 0.1: Initial Development Release - Very rough build.Quick Performance Monitor: Version 1.2: Fixed issue where app crash when performance counter disappear or becomes unavailable while the application is running. For now the exception is si...Quick Performance Monitor: Version 1.3: Add 'view last error'Rule 18 - Love your clipboard: Rule 18 (Visual Studio 2010 + .NET 4 RC Version): This is the second public beta for the first version of Rule 18. It has had a extensive private beta and been used in big presentations since the ...Selection Maker: Selection Maker 1.5: New Features:If the source folder does not exist,a dialog box will appear and ask the user if he/she wants to create that folder or if select anoth...sPATCH: sPatch v0.9a: + Fixed: wrong path to elementclient.exeSQL Server Bible Standards: March 2010: Initial release as presented at SSWUG Virtual Conference Spring 2010Survey - web survey & form engine: Source Code Documentation: Documentation.chm file as published with Nsurvey v. 1.9.1 - april 2005 Basic technical documentation and description of source code for developers...Theocratic Ministry School System: Theocratic Ministry School System - TMSS: This is the first release of TMSS. It is far from complete but demonstrates the possiablities of what can be done with Access 2007 using developer ...Weather Report WebControls: WeatherReport Controls: 本下载包含一个已经经过编译的二进制运行库和一个测试的WebApplication项目，是2010年3月30日发布的Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBase Class LibrariesBlogEngine.NETManaged Extensibility FrameworkFarseer Physics EngineGraffiti CMSMicrosoft Biology FoundationLINQ to Twitterpatterns & practices – Enterprise Library

  Read the article

• Handling HumanTask attachments in Oracle BPM 11g PS4FP+ (I)

  - by ccasares

  Adding attachments to a HumanTask is a feature that exists in Oracle HWF (Human Workflow) since 10g. However, in 11g there have been many improvements on this feature and this entry will try to summarize them. Oracle BPM 11g 11.1.1.5.1 (aka PS4 Feature Pack or PS4FP) introduced two great features: Ability to link attachments at a Task scope or at a Process scope: "Task" attachments are only visible within the scope (lifetime) of a task. This means that, initially, any member of the assignment pattern of the Human Task will be able to handle (add, review or remove) attachments. However, once the task is completed, subsequent human tasks will not have access to them. This does not mean those attachments got lost. Once the human task is completed, attachments can be retrieved in order to, i.e., check them in to a Content Server or to inject them to a new and different human task. Aside note: a "re-initiated" human task will inherit comments and attachments, along with history and -optionally- payload. See here for more info. "Process" attachments are visible within the scope of the process. This means that subsequent human tasks in the same process instance will have access to them. Ability to use Oracle WebCenter Content (previously known as "Oracle UCM") as the backend for the attachments instead of using HWF database backend. This feature adds all content server document lifecycle capabilities to HWF attachments (versioning, RBAC, metadata management, etc). As of today, only Oracle WCC is supported. However, Oracle BPM Suite does include a license of Oracle WCC for the solely usage of document management within BPM scope. Here are some code samples that leverage the above features. Retrieving uploaded attachments -Non UCM- Non UCM attachments (default ones or those that have existed from 10g, and are stored "as-is" in HWK database backend) can be retrieved after the completion of the Human Task. Firstly, we need to know whether any attachment has been effectively uploaded to the human task. There are two ways to find it out: Through an XPath function: Checking the execData/attachment[] structure. For example: Once we are sure one ore more attachments were uploaded to the Human Task, we want to get them. In this example, by "get" I mean to get the attachment name and the payload of the file. Aside note: Oracle HWF lets you to upload two kind of [non-UCM] attachments: a desktop document and a Web URL. This example focuses just on the desktop document one. In order to "retrieve" an uploaded Web URL, you can get it directly from the execData/attachment[] structure. Attachment content (payload) is retrieved through the getTaskAttachmentContents() XPath function: This example shows how to retrieve as many attachments as those had been uploaded to the Human Task and write them to the server using the File Adapter service. The sample process excerpt is as follows:  A dummy UserTask using "HumanTask1" Human Task followed by a Embedded Subprocess that will retrieve the attachments (we're assuming at least one attachment is uploaded): and once retrieved, we will write each of them back to a file in the server using a File Adapter service: In detail: We've defined an XSD structure that will hold the attachments (both name and payload): Then, we can create a BusinessObject based on such element (attachmentCollection) and create a variable (named attachmentBPM) of such BusinessObject type. We will also need to keep a copy of the HumanTask output's execData structure. Therefore we need to create a variable of type TaskExecutionData... ...and copy the HumanTask output execData to it: Now we get into the embedded subprocess that will retrieve the attachments' payload. First, and using an XSLT transformation, we feed the attachmentBPM variable with the name of each attachment and setting an empty value to the payload: Please note that we're using the XSLT for-each node to create as many target structures as necessary. Also note that we're setting an Empty text to the payload variable. The reason for this is to make sure the <payload></payload> tag gets created. This is needed when we map the payload to the XML variable later. Aside note: We are assuming that we're retrieving non-UCM attachments. However in real life you might want to check the type of attachment you're handling. The execData/attachment[]/storageType contains the values "UCM" for UCM type attachments, "TASK" for non-UCM ones or "URL" for Web URL ones. Those values are part of the "Ext.Com.Oracle.Xmlns.Bpel.Workflow.Task.StorageTypeEnum" enumeration. Once we have fed the attachmentsBPM structure and so it now contains the name of each of the attachments, it is time to iterate through it and get the payload. Therefore we will use a new embedded subprocess of type MultiInstance, that will iterate over the attachmentsBPM/attachment[] element: In every iteration we will use a Script activity to map the corresponding payload element with the result of the XPath function getTaskAttachmentContents(). Please, note how the target array element is indexed with the loopCounter predefined variable, so that we make sure we're feeding the right element during the array iteration:  The XPath function used looks as follows: hwf:getTaskAttachmentContents(bpmn:getDataObject('UserTask1LocalExecData')/ns1:systemAttributes/ns1:taskId, bpmn:getDataObject('attachmentsBPM')/ns:attachment[bpmn:getActivityInstanceAttribute('SUBPROCESS3067107484296', 'loopCounter')]/ns:fileName)  where the input parameters are: taskId of the just completed Human Task attachment name we're retrieving the payload from array index (loopCounter predefined variable)  Aside note: The reason whereby we're iterating the execData/attachment[] structure through embedded subprocess and not, i.e., using XSLT and for-each nodes, is mostly because the getTaskAttachmentContents() XPath function is currently not available in XSLT mappings. So all this example might be considered as a workaround until this gets fixed/enhanced in future releases. Once this embedded subprocess ends, we will have all attachments (name + payload) in the attachmentsBPM variable, which is the main goal of this sample. But in order to test everything runs fine, we finish the sample writing each attachment to a file. To that end we include a final embedded subprocess to concurrently iterate through each attachmentsBPM/attachment[] element: On each iteration we will use a Service activity that invokes a File Adapter write service. In here we have two important parameters to set. First, the payload itself. The file adapter awaits binary data in base64 format (string). We have to map it using XPath (Simple mapping doesn't recognize a String as a base64-binary valid target):  Second, we must set the target filename using the Service Properties dialog box:  Again, note how we're making use of the loopCounter index variable to get the right element within the embedded subprocess iteration. Handling UCM attachments will be part of a different and upcoming blog entry. Once I finish will all posts on this matter, I will upload the whole sample project to java.net.

  Read the article

• 6 Ways to Free Up Hard Drive Space Used by Windows System Files

  - by Chris Hoffman

  We’ve previously covered the standard ways to free up space on Windows. But if you have a small solid-state drive and really want more hard space, there are geekier ways to reclaim hard drive space. Not all of these tips are recommended — in fact, if you have more than enough hard drive space, following these tips may actually be a bad idea. There’s a tradeoff to changing all of these settings. Erase Windows Update Uninstall Files Windows allows you to uninstall patches you install from Windows Update. This is helpful if an update ever causes a problem — but how often do you need to uninstall an update, anyway? And will you really ever need to uninstall updates you’ve installed several years ago? These uninstall files are probably just wasting space on your hard drive. A recent update released for Windows 7 allows you to erase Windows Update files from the Windows Disk Cleanup tool. Open Disk Cleanup, click Clean up system files, check the Windows Update Cleanup option, and click OK. If you don’t see this option, run Windows Update and install the available updates. Remove the Recovery Partition Windows computers generally come with recovery partitions that allow you to reset your computer back to its factory default state without juggling discs. The recovery partition allows you to reinstall Windows or use the Refresh and Reset your PC features. These partitions take up a lot of space as they need to contain a complete system image. On Microsoft’s Surface Pro, the recovery partition takes up about 8-10 GB. On other computers, it may be even larger as it needs to contain all the bloatware the manufacturer included. Windows 8 makes it easy to copy the recovery partition to removable media and remove it from your hard drive. If you do this, you’ll need to insert the removable media whenever you want to refresh or reset your PC. On older Windows 7 computers, you could delete the recovery partition using a partition manager — but ensure you have recovery media ready if you ever need to install Windows. If you prefer to install Windows from scratch instead of using your manufacturer’s recovery partition, you can just insert a standard Window disc if you ever want to reinstall Windows. Disable the Hibernation File Windows creates a hidden hibernation file at C:\hiberfil.sys. Whenever you hibernate the computer, Windows saves the contents of your RAM to the hibernation file and shuts down the computer. When it boots up again, it reads the contents of the file into memory and restores your computer to the state it was in. As this file needs to contain much of the contents of your RAM, it’s 75% of the size of your installed RAM. If you have 12 GB of memory, that means this file takes about 9 GB of space. On a laptop, you probably don’t want to disable hibernation. However, if you have a desktop with a small solid-state drive, you may want to disable hibernation to recover the space. When you disable hibernation, Windows will delete the hibernation file. You can’t move this file off the system drive, as it needs to be on C:\ so Windows can read it at boot. Note that this file and the paging file are marked as “protected operating system files” and aren’t visible by default. Shrink the Paging File The Windows paging file, also known as the page file, is a file Windows uses if your computer’s available RAM ever fills up. Windows will then “page out” data to disk, ensuring there’s always available memory for applications — even if there isn’t enough physical RAM. The paging file is located at C:\pagefile.sys by default. You can shrink it or disable it if you’re really crunched for space, but we don’t recommend disabling it as that can cause problems if your computer ever needs some paging space. On our computer with 12 GB of RAM, the paging file takes up 12 GB of hard drive space by default. If you have a lot of RAM, you can certainly decrease the size — we’d probably be fine with 2 GB or even less. However, this depends on the programs you use and how much memory they require. The paging file can also be moved to another drive — for example, you could move it from a small SSD to a slower, larger hard drive. It will be slower if Windows ever needs to use the paging file, but it won’t use important SSD space. Configure System Restore Windows seems to use about 10 GB of hard drive space for “System Protection” by default. This space is used for System Restore snapshots, allowing you to restore previous versions of system files if you ever run into a system problem. If you need to free up space, you could reduce the amount of space allocated to system restore or even disable it entirely. Of course, if you disable it entirely, you’ll be unable to use system restore if you ever need it. You’d have to reinstall Windows, perform a Refresh or Reset, or fix any problems manually. Tweak Your Windows Installer Disc Want to really start stripping down Windows, ripping out components that are installed by default? You can do this with a tool designed for modifying Windows installer discs, such as WinReducer for Windows 8 or RT Se7en Lite for Windows 7. These tools allow you to create a customized installation disc, slipstreaming in updates and configuring default options. You can also use them to remove components from the Windows disc, shrinking the size of the resulting Windows installation. This isn’t recommended as you could cause problems with your Windows installation by removing important features. But it’s certainly an option if you want to make Windows as tiny as possible. Most Windows users can benefit from removing Windows Update uninstallation files, so it’s good to see that Microsoft finally gave Windows 7 users the ability to quickly and easily erase these files. However, if you have more than enough hard drive space, you should probably leave well enough alone and let Windows manage the rest of these settings on its own. Image Credit: Yutaka Tsutano on Flickr     

  Read the article

• Feedback on IE9 developer tool

  - by anirudha

  if you already love IE9 this post really not for you. but still you need something more this post for you and want to know about IE9 why not use product guide they give you IE9 product guide well i already put the bad experience into many post here but a little practice more to show what IE9 actually is or what they show. well i believe that their is no one on MSDN can sure that IE9 is another thing for developer to struggle with. because they never thing about the thing they make. the thinking they have that we product windows who are best so everything we do are best and best. come to the point i means Web browsing we can divide them in two parts 1. someone who are developer and use browser mainly for development , debugging and testing what they produced and make better software. 2. user who are not know things more technically but use the web as their passion. so as a developer what developer want. are IE9 is really for developer now make a comparison. commonly every developer have a twitter account to follow the link of someone else to learn and read the best article on web and share to all follower of themselves. chrome and Firefox have many utilities for that but IE still have nothing. social networking is a good way to communicate with others. in IE their is no plug-in to make experience better as firefox and chrome have a list of plug-in to use browser with more comfort. their are a huge list of plug-in on Firefox and chrome is available for making experience better. but IE9 still have no plug-in for that. if you see http://ieaddons.com/ you still see that they are joking yeah white joke who believe on them. they still have no plug-in. are they fool or making other fool. on 2011 whenever Firefox and chrome claim many thing on the plug-in IE9 still have no plug-in. not for developer not for everyone else. yeah a list of useless stuff you can see their. IE9 developer tool maybe better if they copycat the firebug as they copycat Google’s search result for Bing. well it’ not sure but Google claim that. but what is in IE9 developer tool so great that MSDN developer talking about. i found nothing in IE9 developer tool still feel frustrated their is a big trouble to edit css. means you never can change the css without going to CSS tab. but i thing great many thing they make better their but they still produce not better option in IE9 developer tool. as a comparison firebug is great we all know but chrome is a good option if someone want to try their hands on new things. in firebug their is a list of plugin inside firebug available also to make task easier. like firepicker in firebug make colorpicking easier. firebug autocomplete make console script writing better and yslow show you the performance step you need to take for making site better. IE9 still have no plugin or that. IE9 maybe useful stuff whenever the interface they thing to make better. the problem with MSFT these days that they want to ship next version of every softare in WPF. yeah they make live 2011 in wpf. many of user go for someone else or downgrade their 2011 live. the problem they have that they never want to spent the time on learning to use a software again. IE9 not have the serius problem like live have but still IE9 is not so great as chrome. like in chrome their is smooth tabbing. IE9 ditto copycat the things for tabbing. but a little step more in IE have a problem that IE9 tab slip whenever you want to use them. in chrome never slip the tab without user want. well as user someone also want to paint their browser in the style they want or like. in firefox the sollution called personas or themes. same in chrome the things called themes but in IE they still believe that their is no need for them. means use same themes everytime no customization in 2011 yeah great joke. well i read a post [written in 2008] of developer who still claim that they never used Firefox because they have a license for visual studio and some other software and have IE in their system. i not what they want to show. means they always want or thing to show that firefox and chrome is pity and IE is great as all do. but what’s true we all know. when MSFT release IE9 RC they show the ads with comparison of IE9 RC with chrome6 but why not today with chrome 11 developer version. the many things on IE testdrive now work perfect on chrome. well what’s performance matter when a silly browser never give a better experience. yeah performance have matter in useful software. anyone can prove many things whenever they produce a featureless software. well IE9 is looking great in blogger’s post on many kind of website where developer not independently write. actually they are mentally forced to write for IE9 better and show blah blah even blah is very small as they show. i am not believe on some blogger when they write in a style who are easily known that the post in favor of IE9. if you thing of mine then i am not want to hide myself i am one of the lover of open source so i love Firefox and chrome both. but i am not wrong you find yourself that what is difference between IE9 and Firefox and chrome. so don’t believe on someone who are not mentally independent because most of them are write about IE9 because they want to show them better they are forced themselves to show IE9 as a tool and chrome and firefox as pity. well read everything but never believe on everyone without any confident of them. they actually all want to show the things they have as i have with chrome and firefox is better then IE9. so my feedback on IE9 is :- without any plugin , customization or many thing i described in the post make no sense of use of IE9. i still fall in love of firefox and chrome they both give a better support and things to make experience better on the web. so conclusion is that i not forced you to other not IE9. you need to use the tool who save your time. means if your IE9 save your time you should use them because time was more subjective then others. so use the software who save the time as i save my time in chrome and in firefox. i still found nothing inIE9 who save time of mine.

  Read the article

• CI Deployment Of Azure Web Roles Using TeamCity

  - by srkirkland

  After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint.  By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly.  Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly.  Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/.  If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx).  These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly.  You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file.  Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory.  If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner.  Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward.  Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%"   Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription   function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue   if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } }   function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress"   $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" }   function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress"   # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" }   Write-Output "Create Azure Deployment" Publish   Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”.  Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values).  This should look like the following:   Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity.  You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.”  This will bring up a dialog like the one below, where you can select the last change to use for your deployment.  Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature.   Enjoy!

  Read the article

• Silverlight Recruiting Application Part 4 - Navigation and Modules

  After our brief intermission (and the craziness of Q1 2010 release week), we're back on track here and today we get to dive into how we are going to navigate through our applications as well as how to set up our modules. That way, as I start adding the functionality- adding Jobs and Applicants, Interview Scheduling, and finally a handy Dashboard- you'll see how everything is communicating back and forth. This is all leading up to an eventual webinar, in which I'll dive into this process and give a honest look at the current story for MVVM vs. Code-Behind applications. (For a look at the future with SL4 and a little thing called MEF, check out what Ross is doing over at his blog!) Preamble... Before getting into really talking about this app, I've done a little bit of work ahead of time to create a ton of files that I'll need. Since the webinar is going to cover the Dashboard, it's not here, but otherwise this is a look at what the project layout looks like (and remember, this is both projects since they share the .Web): So as you can see, from an architecture perspective, the code-behind app is much smaller and more streamlined- aka a better fit for the one man shop that is me. Each module in the MVVM app has the same setup, which is the Module class and corresponding Views and ViewModels. Since the code-behind app doesn't need a go-between project like Infrastructure, each MVVM module is instead replaced by a single Silverlight UserControl which will contain all the logic for each respective bit of functionality. My Very First Module Navigation is going to be key to my application, so I figured the first thing I would setup is my MenuModule. First step here is creating a Silverlight Class Library named MenuModule, creatingthe View and ViewModel folders, and adding the MenuModule.cs class to handle module loading. The most important thing here is that my MenuModule inherits from IModule, which runs an Initialize on each module as it is created that, in my case, adds the views to the correct regions. Here's the MenuModule.cs code: public class MenuModule : IModule { private readonly IRegionManager regionManager; private readonly IUnityContainer container; public MenuModule(IUnityContainer container, IRegionManager regionmanager) { this.container = container; this.regionManager = regionmanager; } public void Initialize() { var addMenuView = container.Resolve<MenuView>(); regionManager.Regions["MenuRegion"].Add(addMenuView); } } Pretty straightforward here... We inject a container and region manager from Prism/Unity, then upon initialization we grab the view (out of our Views folder) and add it to the region it needs to live in. Simple, right? When the MenuView is created, the only thing in the code-behind is a reference to the set the MenuViewModel as the DataContext. I'd like to achieve MVVM nirvana and have zero code-behind by placing the viewmodel in the XAML, but for the reasons listed further below I can't. Navigation - MVVM Since navigation isn't the biggest concern in putting this whole thing together, I'm using the Button control to handle different options for loading up views/modules. There is another reason for this- out of the box, Prism has command support for buttons, which is one less custom command I had to work up for the functionality I would need. This comes from the Microsoft.Practices.Composite.Presentation assembly and looks as follows when put in code: <Button x:Name="xGoToJobs" Style="{StaticResource menuStyle}" Content="Jobs" cal:Click.Command="{Binding GoModule}" cal:Click.CommandParameter="JobPostingsView" /> For quick reference, 'menuStyle' is just taking care of margins and spacing, otherwise it looks, feels, and functions like everyone's favorite Button. What MVVM's this up is that the Click.Command is tying to a DelegateCommand (also coming fromPrism) on the backend. This setup allows you to tie user interaction to a command you setup in your viewmodel, which replaces the standard event-based setup you'd see in the code-behind app. Due to databinding magic, it all just works. When we get looking at the DelegateCommand in code, it ends up like this: public class MenuViewModel : ViewModelBase { private readonly IRegionManager regionManager; public DelegateCommand<object> GoModule { get; set; } public MenuViewModel(IRegionManager regionmanager) { this.regionManager = regionmanager; this.GoModule = new DelegateCommand<object>(this.goToView); } public void goToView(object obj) { MakeMeActive(this.regionManager, "MainRegion", obj.ToString()); } } Another for reference, ViewModelBase takes care of iNotifyPropertyChanged and MakeMeActive, which switches views in the MainRegion based on the parameters. So our public DelegateCommand GoModule ties to our command on the view, that in turn calls goToView, and the parameter on the button is the name of the view (which we pass with obj.ToString()) to activate. And how do the views get the names I can pass as a string? When I called regionManager.Regions[regionname].Add(view), there is an overload that allows for .Add(view, "viewname"), with viewname being what I use to activate views. You'll see that in action next installment, just wanted to clarify how that works. With this setup, I create two more buttons in my MenuView and the MenuModule is good to go. Last step is to make sure my MenuModule loads in my Bootstrapper: protected override IModuleCatalog GetModuleCatalog() { ModuleCatalog catalog = new ModuleCatalog(); // add modules here catalog.AddModule(typeof(MenuModule.MenuModule)); return catalog; } Clean, simple, MVVM-delicious. Navigation - Code-Behind Keeping with the history of significantly shorter code-behind sections of this series, Navigation will be no different. I promise. As I explained in a prior post, due to the one-project setup I don't have to worry about the same concerns so my menu is part of MainPage.xaml. So I can cheese-it a bit, though, since I've already got three buttons all set I'm just copying that code and adding three click-events instead of the command/commandparameter setup: <!-- Menu Region --> <StackPanel Grid.Row="1" Orientation="Vertical"> <Button x:Name="xJobsButton" Content="Jobs" Style="{StaticResource menuStyleCB}" Click="xJobsButton_Click" /> <Button x:Name="xApplicantsButton" Content="Applicants" Style="{StaticResource menuStyleCB}" Click="xApplicantsButton_Click" /> <Button x:Name="xSchedulingModule" Content="Scheduling" Style="{StaticResource menuStyleCB}" Click="xSchedulingModule_Click" /> </StackPanel> Simple, easy to use events, and no extra assemblies required! Since the code for loading each view will be similar, we'll focus on JobsView for now.The code-behind with this setup looks something like... private JobsView _jobsView; public MainPage() { InitializeComponent(); } private void xJobsButton_Click(object sender, RoutedEventArgs e) { if (MainRegion.Content.GetType() != typeof(JobsView)) { if (_jobsView == null) _jobsView = new JobsView(); MainRegion.Content = _jobsView; } } What am I doing here? First, for each 'view' I create a private reference which MainPage will hold on to. This allows for a little bit of state-maintenance when switching views. When a button is clicked, first we make sure the 'view' typeisn't active (why load it again if it is already at center stage?), then we check if the view has been created and create if necessary, then load it up. Three steps to switching views and is easy as pie. Part 4 Results The end result of all this is that I now have a menu module (MVVM) and a menu section (code-behind) that load their respective views. Since I'm using the same exact XAML (except with commands/events depending on the project), the end result for both is again exactly the same and I'll show a slightly larger image to show it off: Next time, we add the Jobs Module and wire up RadGridView and a separate edit page to handle adding and editing new jobs. That's when things get fun. And somewhere down the line, I'll make the menu look slicker. :) Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

  - by Asian Angel

  This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

  Read the article

• Software Engineering Practices &ndash; Different Projects should have different maturity levels

  - by Dylan Smith

  I’ve had a lot of discussions at the office lately about the drastically different sets of software engineering practices used on our various projects, if what we are doing is appropriate, and what factors should you be considering when determining what practices are most appropriate in a given context. I wanted to write up my thoughts in a little more detail on this subject, so here we go: If you compare any two software projects (specifically comparing their codebases) you’ll often see very different levels of maturity in the software engineering practices employed. By software engineering practices, I’m specifically referring to the quality of the code and the amount of technical debt present in the project. Things such as Test Driven Development, Domain Driven Design, Behavior Driven Development, proper adherence to the SOLID principles, etc. are all practices that you would expect at the mature end of the spectrum. At the other end of the spectrum would be the quick-and-dirty solutions that are done using something like an Access Database, Excel Spreadsheet, or maybe some quick “drag-and-drop coding”. For this blog post I’m going to refer to this as the Software Engineering Maturity Spectrum (SEMS). I believe there is a time and a place for projects at every part of that SEMS. The risks and costs associated with under-engineering solutions have been written about a million times over so I won’t bother going into them again here, but there are also (unnecessary) costs with over-engineering a solution. Sometimes putting multiple layers, and IoC containers, and abstracting out the persistence, etc is complete overkill if a one-time use Access database could solve the problem perfectly well. A lot of software developers I talk to seem to automatically jump to the very right-hand side of this SEMS in everything they do. A common rationalization I hear is that it may seem like a small trivial application today, but these things always grow and stick around for many years, then you’re stuck maintaining a big ball of mud. I think this is a cop-out. Sure you can’t always anticipate how an application will be used or grow over its lifetime (can you ever??), but that doesn’t mean you can’t manage it and evolve the underlying software architecture as necessary (even if that means having to toss the code out and re-write it at some point…maybe even multiple times). My thoughts are that we should be making a conscious decision around the start of each project approximately where on the SEMS we want the project to exist. I believe this decision should be based on 3 factors: 1. Importance - How important to the business is this application? What is the impact if the application were to suddenly stop working? 2. Complexity - How complex is the application functionality? 3. Life-Expectancy - How long is this application expected to be in use? Is this a one-time use application, does it fill a short-term need, or is it more strategic and is expected to be in-use for many years to come? Of course this isn’t an exact science. You can’t say that Project X should be at the 73% mark on the SEMS and expect that to be helpful. My point is not that you need to precisely figure out what point on the SEMS the project should be at then translate that into some prescriptive set of practices and techniques you should be using. Rather my point is that we need to be aware that there is a spectrum, and that not everything is going to be (or should be) at the edges of that spectrum, indeed a large number of projects should probably fall somewhere within the middle; and different projects should adopt a different level of software engineering practices and maturity levels based on the needs of that project. To give an example of this way of thinking from my day job: Every couple of years my company plans and hosts a large event where ~400 of our customers all fly in to one location for a multi-day event with various activities. We have some staff whose job it is to organize the logistics of this event, which includes tracking which flights everybody is booked on, arranging for transportation to/from airports, arranging for hotel rooms, name tags, etc The last time we arranged this event all these various pieces of data were tracked in separate spreadsheets and reconciliation and cross-referencing of all the data was literally done by hand using printed copies of the spreadsheets and several people sitting around a table going down each list row by row. Obviously there is some room for improvement in how we are using software to manage the event’s logistics. The next time this event occurs we plan to provide the event planning staff with a more intelligent tool (either an Excel spreadsheet or probably an Access database) that can track all the information in one location and make sure that the various pieces of data are properly linked together (so for example if a person cancels you only need to delete them from one place, and not a dozen separate lists). This solution would fall at or near the very left end of the SEMS meaning that we will just quickly create something with very little attention paid to using mature software engineering practices. If we examine this project against the 3 criteria I listed above for determining it’s place within the SEMS we can see why: Importance – If this application were to stop working the business doesn’t grind to a halt, revenue doesn’t stop, and in fact our customers wouldn’t even notice since it isn’t a customer facing application. The impact would simply be more work for our event planning staff as they revert back to the previous way of doing things (assuming we don’t have any data loss). Complexity – The use cases for this project are pretty straightforward. It simply needs to manage several lists of data, and link them together appropriately. Precisely the task that access (and/or Excel) can do with minimal custom development required. Life-Expectancy – For this specific project we’re only planning to create something to be used for the one event (we only hold these events every 2 years). If it works well this may change (see below). Let’s assume we hack something out quickly and it works great when we plan the next event. We may decide that we want to make some tweaks to the tool and adopt it for planning all future events of this nature. In that case we should examine where the current application is on the SEMS, and make a conscious decision whether something needs to be done to move it further to the right based on the new objectives and goals for this application. This may mean scrapping the access database and re-writing it as an actual web or windows application. In this case, the life-expectancy changed, but let’s assume the importance and complexity didn’t change all that much. We can still probably get away with not adopting a lot of the so-called “best practices”. For example, we can probably still use some of the RAD tooling available and might have an Autonomous View style design that connects directly to the database and binds to typed datasets (we might even choose to simply leave it as an access database and continue using it; this is a decision that needs to be made on a case-by-case basis). At Anvil Digital we have aspirations to become a primarily product-based company. So let’s say we use this tool to plan a handful of events internally, and everybody loves it. Maybe a couple years down the road we decide we want to package the tool up and sell it as a product to some of our customers. In this case the project objectives/goals change quite drastically. Now the tool becomes a source of revenue, and the impact of it suddenly stopping working is significantly less acceptable. Also as we hold focus groups, and gather feedback from customers and potential customers there’s a pretty good chance the feature-set and complexity will have to grow considerably from when we were using it only internally for planning a small handful of events for one company. In this fictional scenario I would expect the target on the SEMS to jump to the far right. Depending on how we implemented the previous release we may be able to refactor and evolve the existing codebase to introduce a more layered architecture, a robust set of automated tests, introduce a proper ORM and IoC container, etc. More likely in this example the jump along the SEMS would be so large we’d probably end up scrapping the current code and re-writing. Although, if it was a slow phased roll-out to only a handful of customers, where we collected feedback, made some tweaks, and then rolled out to a couple more customers, we may be able to slowly refactor and evolve the code over time rather than tossing it out and starting from scratch. The key point I’m trying to get across is not that you should be throwing out your code and starting from scratch all the time. But rather that you should be aware of when and how the context and objectives around a project changes and periodically re-assess where the project currently falls on the SEMS and whether that needs to be adjusted based on changing needs. Note: There is also the idea of “spectrum decay”. Since our industry is rapidly evolving, what we currently accept as mature software engineering practices (the right end of the SEMS) probably won’t be the same 3 years from now. If you have a project that you were to assess at somewhere around the 80% mark on the SEMS today, but don’t touch the code for 3 years and come back and re-assess its position, it will almost certainly have changed since the right end of the SEMS will have moved farther out (maybe the project is now only around 60% due to decay). Developer Skills Another important aspect to this whole discussion is around the skill sets of your architects and lead developers. When talking about the progression of a developers skills from junior->intermediate->senior->… they generally start by only being able to write code that belongs on the left side of the SEMS and as they gain more knowledge and skill they become capable of working at a higher and higher level along the SEMS. We all realize that the learning never stops, but eventually you’ll get to the point where you can comfortably develop at the right-end of the SEMS (the exact practices and techniques that translates to is constantly changing, but that’s not the point here). A critical skill that I’d love to see more evidence of in our industry is the most senior guys not only being able to work at the right-end of the SEMS, but more importantly be able to consciously work at any point along the SEMS as project needs dictate. An even more valuable skill would be if you could make the conscious decision to move a projects code further right on the SEMS (based on changing needs) and do so in an incremental manner without having to start from scratch. An exercise that I’m planning to go through with all of our projects here at Anvil in the near future is to map out where I believe each project currently falls within this SEMS, where I believe the project *should* be on the SEMS based on the business needs, and for those that don’t match up (i.e. most of them) come up with a plan to improve the situation.

  Read the article

• readonly keyword

  - by nmarun

  This is something new that I learned about the readonly keyword. Have a look at the following class: 1: public class MyClass 2: { 3: public string Name { get; set; } 4: public int Age { get; set; } 5:  6: private readonly double Delta; 7:  8: public MyClass() 9: { 10: Initializer(); 11: } 12:  13: public MyClass(string name = "", int age = 0) 14: { 15: Name = name; 16: Age = age; 17: Initializer(); 18: } 19:  20: private void Initializer() 21: { 22: Delta = 0.2; 23: } 24: } I have a couple of public properties and a private readonly member. There are two constructors – one that doesn’t take any parameters and the other takes two parameters to initialize the public properties. I’m also calling the Initializer method in both constructors to initialize the readonly member. Now when I build this, the code breaks and the Error window says: “A readonly field cannot be assigned to (except in a constructor or a variable initializer)” Two things after I read this message: It’s such a negative statement. I’d prefer something like: “A readonly field can be assigned to (or initialized) only in a constructor or through a variable initializer” But in my defense, I AM assigning it in a constructor (only indirectly). All I’m doing is creating a method that does it and calling it in a constructor. Turns out, .net was not ‘frameworked’ this way. We need to have the member initialized directly in the constructor. If you have multiple constructors, you can just use the ‘this’ keyword on all except the default constructors to call the default constructor. This default constructor can then initialize your readonly members. This will ensure you’re not repeating the code in multiple places. A snippet of what I’m talking can be seen below: 1: public class Person 2: { 3: public int UniqueNumber { get; set; } 4: public string Name { get; set; } 5: public int Age { get; set; } 6: public DateTime DateOfBirth { get; set; } 7: public string InvoiceNumber { get; set; } 8:  9: private readonly string Alpha; 10: private readonly int Beta; 11: private readonly double Delta; 12: private readonly double Gamma; 13:  14: public Person() 15: { 16: Alpha = "FDSA"; 17: Beta = 2; 18: Delta = 3.0; 19: Gamma = 0.0989; 20: } 21:  22: public Person(int uniqueNumber) : this() 23: { 24: UniqueNumber = uniqueNumber; 25: } 26: } See the syntax in line 22 and you’ll know what I’m talking about. So the default constructor gets called before the one in line 22. These are known as constructor initializers and they allow one constructor to call another. The other ‘myth’ I had about readonly members is that you can set it’s value only once. This was busted as well (I recall Adam and Jamie’s show). Say you’ve initialized the readonly member through a variable initializer. You can over-write this value in any of the constructors any number of times. 1: public class Person 2: { 3: public int UniqueNumber { get; set; } 4: public string Name { get; set; } 5: public int Age { get; set; } 6: public DateTime DateOfBirth { get; set; } 7: public string InvoiceNumber { get; set; } 8:  9: private readonly string Alpha = "asdf"; 10: private readonly int Beta = 15; 11: private readonly double Delta = 0.077; 12: private readonly double Gamma = 1.0; 13:  14: public Person() 15: { 16: Alpha = "FDSA"; 17: Beta = 2; 18: Delta = 3.0; 19: Gamma = 0.0989; 20: } 21:  22: public Person(int uniqueNumber) : this() 23: { 24: UniqueNumber = uniqueNumber; 25: Beta = 3; 26: } 27:  28: public Person(string name, DateTime dob) : this() 29: { 30: Name = name; 31: DateOfBirth = dob; 32:  33: Alpha = ";LKJ"; 34: Gamma = 0.0898; 35: } 36:  37: public Person(int uniqueNumber, string name, int age, DateTime dob, string invoiceNumber) : this() 38: { 39: UniqueNumber = uniqueNumber; 40: Name = name; 41: Age = age; 42: DateOfBirth = dob; 43: InvoiceNumber = invoiceNumber; 44:  45: Alpha = "QWER"; 46: Beta = 5; 47: Delta = 1.0; 48: Gamma = 0.0; 49: } 50: } In the above example, every constructor over-writes the values for the readonly members. This is perfectly valid. There is a possibility that based on the way the object is instantiated, the readonly member will have a different value. Well, that’s all I have for today and read this as it’s on a related topic.

  Read the article

• How to configure VPN in Windows XP

  - by SAMIR BHOGAYTA

  VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

  Read the article

• SQL SERVER – Faster SQL Server Databases and Applications – Power and Control with SafePeak Caching Options

  - by Pinal Dave

  Update: This blog post is written based on the SafePeak, which is available for free download. Today, I’d like to examine more closely one of my preferred technologies for accelerating SQL Server databases, SafePeak. Safepeak’s software provides a variety of advanced data caching options, techniques and tools to accelerate the performance and scalability of SQL Server databases and applications. I’d like to look more closely at some of these options, as some of these capabilities could help you address lagging database and performance on your systems. To better understand the available options, it is best to start by understanding the difference between the usual “Basic Caching” vs. SafePeak’s “Dynamic Caching”. Basic Caching Basic Caching (or the stale and static cache) is an ability to put the results from a query into cache for a certain period of time. It is based on TTL, or Time-to-live, and is designed to stay in cache no matter what happens to the data. For example, although the actual data can be modified due to DML commands (update/insert/delete), the cache will still hold the same obsolete query data. Meaning that with the Basic Caching is really static / stale cache.  As you can tell, this approach has its limitations. Dynamic Caching Dynamic Caching (or the non-stale cache) is an ability to put the results from a query into cache while maintaining the cache transaction awareness looking for possible data modifications. The modifications can come as a result of: DML commands (update/insert/delete), indirect modifications due to triggers on other tables, executions of stored procedures with internal DML commands complex cases of stored procedures with multiple levels of internal stored procedures logic. When data modification commands arrive, the caching system identifies the related cache items and evicts them from cache immediately. In the dynamic caching option the TTL setting still exists, although its importance is reduced, since the main factor for cache invalidation (or cache eviction) become the actual data updates commands. Now that we have a basic understanding of the differences between “basic” and “dynamic” caching, let’s dive in deeper. SafePeak: A comprehensive and versatile caching platform SafePeak comes with a wide range of caching options. Some of SafePeak’s caching options are automated, while others require manual configuration. Together they provide a complete solution for IT and Data managers to reach excellent performance acceleration and application scalability for  a wide range of business cases and applications. Automated caching of SQL Queries: Fully/semi-automated caching of all “read” SQL queries, containing any types of data, including Blobs, XMLs, Texts as well as all other standard data types. SafePeak automatically analyzes the incoming queries, categorizes them into SQL Patterns, identifying directly and indirectly accessed tables, views, functions and stored procedures; Automated caching of Stored Procedures: Fully or semi-automated caching of all read” stored procedures, including procedures with complex sub-procedure logic as well as procedures with complex dynamic SQL code. All procedures are analyzed in advance by SafePeak’s  Metadata-Learning process, their SQL schemas are parsed – resulting with a full understanding of the underlying code, objects dependencies (tables, views, functions, sub-procedures) enabling automated or semi-automated (manually review and activate by a mouse-click) cache activation, with full understanding of the transaction logic for cache real-time invalidation; Transaction aware cache: Automated cache awareness for SQL transactions (SQL and in-procs); Dynamic SQL Caching: Procedures with dynamic SQL are pre-parsed, enabling easy cache configuration, eliminating SQL Server load for parsing time and delivering high response time value even in most complicated use-cases; Fully Automated Caching: SQL Patterns (including SQL queries and stored procedures) that are categorized by SafePeak as “read and deterministic” are automatically activated for caching; Semi-Automated Caching: SQL Patterns categorized as “Read and Non deterministic” are patterns of SQL queries and stored procedures that contain reference to non-deterministic functions, like getdate(). Such SQL Patterns are reviewed by the SafePeak administrator and in usually most of them are activated manually for caching (point and click activation); Fully Dynamic Caching: Automated detection of all dependent tables in each SQL Pattern, with automated real-time eviction of the relevant cache items in the event of “write” commands (a DML or a stored procedure) to one of relevant tables. A default setting; Semi Dynamic Caching: A manual cache configuration option enabling reducing the sensitivity of specific SQL Patterns to “write” commands to certain tables/views. An optimization technique relevant for cases when the query data is either known to be static (like archive order details), or when the application sensitivity to fresh data is not critical and can be stale for short period of time (gaining better performance and reduced load); Scheduled Cache Eviction: A manual cache configuration option enabling scheduling SQL Pattern cache eviction based on certain time(s) during a day. A very useful optimization technique when (for example) certain SQL Patterns can be cached but are time sensitive. Example: “select customers that today is their birthday”, an SQL with getdate() function, which can and should be cached, but the data stays relevant only until 00:00 (midnight); Parsing Exceptions Management: Stored procedures that were not fully parsed by SafePeak (due to too complex dynamic SQL or unfamiliar syntax), are signed as “Dynamic Objects” with highest transaction safety settings (such as: Full global cache eviction, DDL Check = lock cache and check for schema changes, and more). The SafePeak solution points the user to the Dynamic Objects that are important for cache effectiveness, provides easy configuration interface, allowing you to improve cache hits and reduce cache global evictions. Usually this is the first configuration in a deployment; Overriding Settings of Stored Procedures: Override the settings of stored procedures (or other object types) for cache optimization. For example, in case a stored procedure SP1 has an “insert” into table T1, it will not be allowed to be cached. However, it is possible that T1 is just a “logging or instrumentation” table left by developers. By overriding the settings a user can allow caching of the problematic stored procedure; Advanced Cache Warm-Up: Creating an XML-based list of queries and stored procedure (with lists of parameters) for periodically automated pre-fetching and caching. An advanced tool allowing you to handle more rare but very performance sensitive queries pre-fetch them into cache allowing high performance for users’ data access; Configuration Driven by Deep SQL Analytics: All SQL queries are continuously logged and analyzed, providing users with deep SQL Analytics and Performance Monitoring. Reduce troubleshooting from days to minutes with database objects and SQL Patterns heat-map. The performance driven configuration helps you to focus on the most important settings that bring you the highest performance gains. Use of SafePeak SQL Analytics allows continuous performance monitoring and analysis, easy identification of bottlenecks of both real-time and historical data; Cloud Ready: Available for instant deployment on Amazon Web Services (AWS). As you can see, there are many options to configure SafePeak’s SQL Server database and application acceleration caching technology to best fit a lot of situations. If you’re not familiar with their technology, they offer free-trial software you can download that comes with a free “help session” to help get you started. You can access the free trial here. Also, SafePeak is available to use on Amazon Cloud. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Building KPIs to monitor your business Its not really about the Technology

  When I have discussions with people about Business Intelligence, one of the questions the inevitably come up is about building KPIs and how to accomplish that. From a technical level the concept of a KPI is very simple, almost too simple in that it is like the tip of an iceberg floating above the water. The key to that iceberg is not really the tip, but the mass of the iceberg that is hidden beneath the surface upon which the tip sits. The analogy of the iceberg is not meant to indicate that the foundation of the KPI is overly difficult or complex. The disparity in size in meant to indicate that the larger thing that needs to be defined is not the technical tip, but the underlying business definition of what the KPI means. From a technical perspective the KPI consists of primarily the following items: Actual Value This is the actual value data point that is being measured. An example would be something like the amount of sales. Target Value This is the target goal for the KPI. This is a number that can be measured against Actual Value. An example would be $10,000 in monthly sales. Target Indicator Range This is the definition of ranges that define what type of indicator the user will see comparing the Actual Value to the Target Value. Most often this is defined by stoplight, but can be any indicator that is going to show a status in a quick fashion to the user. Typically this would be something like: Red Light = Actual Value more than 5% below target; Yellow Light = Within 5% of target either direction; Green Light = More than 5% higher than Target Value Status\Trend Indicator This is an optional attribute of a KPI that is typically used to show some kind of trend. The vast majority of these indicators are used to show some type of progress against a previous period. As an example, the status indicator might be used to show how the monthly sales compare to last month. With this type of indicator there needs to be not only a definition of what the ranges are for your status indictor, but then also what value the number needs to be compared against. So now we have an idea of what data points a KPI consists of from a technical perspective lets talk a bit about tools. As you can see technically there is not a whole lot to them and the choice of technology is not as important as the definition of the KPIs, which we will get to in a minute. There are many different types of tools in the Microsoft BI stack that you can use to expose your KPI to the business. These include Performance Point, SharePoint, Excel, and SQL Reporting Services. There are pluses and minuses to each technology and the right technology is based a lot on your goals and how you want to deliver the information to the users. Additionally, there are other non-Microsoft tools that can be used to expose KPI indicators to your business users. Regardless of the technology used as your front end, the heavy lifting of KPI is in the business definition of the values and benchmarks for that KPI. The discussion about KPIs is very dependent on the history of an organization and how much they are exposed to the attributes of a KPI. Often times when discussing KPIs with a business contact who has not been exposed to KPIs the discussion tends to also be a session educating the business user about what a KPI is and what goes into the definition of a KPI. The majority of times the business user has an idea of what their actual values are and they have been tracking those numbers for some time, generally in Excel and all manually. So they will know the amount of sales last month along with sales two years ago in the same month. Where the conversation tends to get stuck is when you start discussing what the target value should be. The actual value is answering the What and How much questions. When you are talking about the Target values you are asking the question Is this number good or bad. Typically, the user will know whether or not the value is good or bad, but most of the time they are not able to quantify what is good or bad. Their response is usually something like I just know. Because they have been watching the sales quantity for years now, they can tell you that a 5% decrease in sales this month might actually be a good thing, maybe because the salespeople are all waiting until next month when the new versions come out. It can sometimes be very hard to break the business people of this habit. One of the fears generally is that the status indicator is not subjective. Thus, in the scenario above, the business user is going to be fearful that their boss, just looking at a negative red indicator, is going to haul them out to the woodshed for a bad month. But, on the flip side, if all you are displaying is the amount of sales, only a person with knowledge of last month sales and the target amount for this month would have any idea if $10,000 in sales is good or not. Here is where a key point about KPIs needs to be communicated to both the business user and any user who might be viewing the results of that KPI. The KPI is just one tool that is used to report on business performance. The KPI is meant as a quick indicator of one business statistic. It is not meant to tell the entire story. It does not answer the question Why. Its primary purpose is to objectively and quickly expose an area of the business that might warrant more review. There is always going to be the need to do further analysis on any potential negative or neutral KPI. So, hopefully, once you have convinced your business user to come up with some target numbers and ranges for status indicators, you then need to take the next step and help them answer the Why question. The main question here to ask is, Okay, you see the indicator and you need to discover why the number is what is, where do you go?. The answer is usually a combination of sources. A sales manager might have some of the following items at their disposal (Marketing report showing a decrease in the promotional discounts for the month, Pricing Report showing the reduction of prices of older models, an Inventory Report showing the discontinuation of a particular product line, or a memo showing the ending of a large affiliate partnership. The answers to the question Why are never as simple as a single indicator value. Bring able to quickly get to this information is all about designing how a user accesses the KPIs and then also how easily they can get to the additional information they need. This is where a Dashboard mentality can come in handy. For example, the business user can have a dashboard that shows their KPIs, but also has links to some of the common reports that they run regarding Sales Data. The users boss may have the same KPIs on their dashboard, but instead of links to individual reports they are going to have a link to a status report that was created by the user that pulls together all the data about the KPI in a summary format the users boss can review. So some of the key things to think about when building or evaluating KPIs for your organization: Technology should not be the driving factor KPIs are of little value without some indicator for whether a value is good, bad or neutral. KPIs only give an answer to the Is this number good\bad? question Make sure the ability to drill into the Why of a KPI is close at hand and relevant to the user who is viewing the KPI. The KPI is a key business tool when defined properly to help monitor business performance across the enterprise in an objective and consistent manner. At times it might feel like the process of defining the business aspects of a KPI can sometimes be arduous, the payoff in the end can far outweigh the costs. Some of the benefits of going through this process are a better understanding of the key metrics for an organization and the measure of those metrics and a consistent snapshot of business performance that can be utilized across the organization. And I think that these are benefits to any organization regardless of the technology or the implementation.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Granular Clipboard Control in Oracle IRM

  - by martin.abrahams

  One of the main leak prevention controls that customers are looking for is clipboard control. After all, there is little point in controlling access to a document if authorised users can simply make unprotected copies by use of the cut and paste mechanism. Oddly, for such a fundamental requirement, many solutions only offer very simplistic clipboard control - and require the customer to make an awkward choice between usability and security. In many cases, clipboard control is simply an ON-OFF option. By turning the clipboard OFF, you disable one of the most valuable edit functions known to man. Try working for any length of time without copying and pasting, and you'll soon appreciate how valuable that function is. Worse, some solutions disable the clipboard completely - not just for the protected document but for all of the various applications you have open at the time. Normal service is only resumed when you close the protected document. In this way, policy enforcement bleeds out of the particular assets you need to protect and interferes with the entire user experience. On the other hand, turning the clipboard ON satisfies a fundamental usability requirement - but also makes it really easy for users to create unprotected copies of sensitive information, maliciously or otherwise. All they need to do is paste into another document. If creating unprotected copies is this simple, you have to question how much you are really gaining by applying protection at all. You may not be allowed to edit, forward, or print the protected asset, but all you need to do is create a copy and work with that instead. And that activity would not be tracked in any way. So, a simple ON-OFF control creates a real tension between usability and security. If you are only using IRM on a small scale, perhaps security can outweigh usability - the business can put up with the restriction if it only applies to a handful of important documents. But try extending protection to large numbers of documents and large user communities, and the restriction rapidly becomes really unwelcome. I am aware of one solution that takes a different tack. Rather than disable the clipboard, pasting is always permitted, but protection is automatically applied to any document that you paste into. At first glance, this sounds great - protection travels with the content. However, at any scale this model may not be so appealing once you've had to deal with support calls from users who have accidentally applied protection to documents that really don't need it - which would be all too easily done. This may help control leakage, but it also pollutes the system with documents that have policies applied with no obvious rhyme or reason, and it can seriously inconvenience the business by making non-sensitive documents difficult to access. And what policy applies if you paste some protected content into an already protected document? Which policy applies? There are no prizes for guessing that Oracle IRM takes a rather different approach. The Oracle IRM Approach Oracle IRM offers a spectrum of clipboard controls between the extremes of ON and OFF, and it leverages the classification-based rights model to give granular control that satisfies both security and usability needs. Firstly, we take it for granted that if you have EDIT rights, of course you can use the clipboard within a given document. Why would we force you to retype a piece of content that you want to move from HERE... to HERE...? If the pasted content remains in the same document, it is equally well protected whether it be at the beginning, middle, or end - or all three. So, the first point is that Oracle IRM always enables the clipboard if you have the right to edit the file. Secondly, whether we enable or disable the clipboard, we only affect the protected document. That is, you can continue to use the clipboard in the usual way for unprotected documents and applications regardless of whether the clipboard is enabled or disabled for the protected document(s). And if you have multiple protected documents open, each may have the clipboard enabled or disabled independently, according to whether you have Edit rights for each. So, even for the simplest cases - the ON-OFF cases - Oracle IRM adds value by containing the effect to the protected documents rather than to the whole desktop environment. Now to the granular options between ON and OFF. Thanks to our classification model, we can define rights that enable pasting between documents in the same classification - ie. between documents that are protected by the same policy. So, if you are working on this month's financial report and you want to pull some data from last month's report, you can simply cut and paste between the two documents. The two documents are classified the same way, subject to the same policy, so the content is equally safe in both documents. However, if you try to paste the same data into an unprotected document or a document in a different classification, you can be prevented. Thus, the control balances legitimate user requirements to allow pasting with legitimate information security concerns to keep data protected. We can take this further. You may have the right to paste between related classifications of document. So, the CFO might want to copy some financial data into a board document, where the two documents are sealed to different classifications. The CFO's rights may well allow this, as it is a reasonable thing for a CFO to want to do. But policy might prevent the CFO from copying the same data into a classification that is accessible to external parties. The above option, to copy between classifications, may be for specific classifications or open-ended. That is, your rights might enable you to go from A to B but not to C, or you might be allowed to paste to any classification subject to your EDIT rights. As for so many features of Oracle IRM, our classification-based rights model makes this type of granular control really easy to manage - you simply define that pasting is permitted between classifications A and B, but omit C. Or you might define that pasting is permitted between all classifications, but not to unprotected locations. The classification model enables millions of documents to be controlled by a few such rules. Finally, you MIGHT have the option to paste anywhere - such that unprotected copies may be created. This is rare, but a legitimate configuration for some users, some use cases, and some classifications - but not something that you have to permit simply because the alternative is too restrictive. As always, these rights are defined in user roles - so different users are subject to different clipboard controls as required in different classifications. So, where most solutions offer just two clipboard options - ON-OFF or ON-but-encrypt-everything-you-touch - Oracle IRM offers real granularity that leverages our classification model. Indeed, I believe it is the lack of a classification model that makes such granularity impractical for other IRM solutions, because the matrix of rules for controlling pasting would be impossible to manage - there are so many documents to consider, and more are being created all the time.

  Read the article

• SQL University: Database testing and refactoring tools and examples

  - by Mladen Prajdic

  This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Database testing and refactoring tools and examples This is the third and last part of the series and in it we’ll take a look at tools we can test and refactor with plus some an example of the both. Tools of the trade First a few thoughts about how to go about testing a database. I'm firmily against any testing tools that go into the database itself or need an extra database. Unit tests for the database and applications using the database should all be in one place using the same technology. By using database specific frameworks we fragment our tests into many places and increase test system complexity. Let’s take a look at some testing tools. 1. NUnit, xUnit, MbUnit All three are .Net testing frameworks meant to unit test .Net application. But we can test databases with them just fine. I use NUnit because I’ve always used it for work and personal projects. One day this might change. So the thing to remember is to be flexible if something better comes along. All three are quite similar and you should be able to switch between them without much problem. 2. TSQLUnit As much as this framework is helpful for the non-C# savvy folks I don’t like it for the reason I stated above. It lives in the database and thus fragments the testing infrastructure. Also it appears that it’s not being actively developed anymore. 3. DbFit I haven’t had the pleasure of trying this tool just yet but it’s on my to-do list. From what I’ve read and heard Gojko Adzic (@gojkoadzic on Twitter) has done a remarkable job with it. 4. Redgate SQL Refactor and Apex SQL Refactor Neither of these refactoring tools are free, however if you have hardcore refactoring planned they are worth while looking into. I’ve only used the Red Gate’s Refactor and was quite impressed with it. 5. Reverting the database state I’ve talked before about ways to revert a database to pre-test state after unit testing. This still holds and I haven’t changed my mind. Also make sure to read the comments as they are quite informative. I especially like the idea of setting up and tearing down the schema for each test group with NHibernate. Testing and refactoring example We’ll take a look at the simple schema and data test for a view and refactoring the SELECT * in that view. We’ll use a single table PhoneNumbers with ID and Phone columns. Then we’ll refactor the Phone column into 3 columns Prefix, Number and Suffix. Lastly we’ll remove the original Phone column. Then we’ll check how the view behaves with tests in NUnit. The comments in code explain the problem so be sure to read them. I’m assuming you know NUnit and C#. T-SQL Code C# test code USE tempdbGOCREATE TABLE PhoneNumbers( ID INT IDENTITY(1,1), Phone VARCHAR(20))GOINSERT INTO PhoneNumbers(Phone)SELECT '111 222333 444' UNION ALLSELECT '555 666777 888'GO-- notice we don't have WITH SCHEMABINDINGCREATE VIEW vPhoneNumbersAS SELECT * FROM PhoneNumbersGO-- Let's take a look at what the view returns -- If we add a new columns and rows both tests will failSELECT *FROM vPhoneNumbers GO -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will SUCCEED -- refactor to split Phone column into 3 partsALTER TABLE PhoneNumbers ADD Prefix VARCHAR(3)ALTER TABLE PhoneNumbers ADD Number VARCHAR(6)ALTER TABLE PhoneNumbers ADD Suffix VARCHAR(3)GO-- update the new columnsUPDATE PhoneNumbers SET Prefix = LEFT(Phone, 3), Number = SUBSTRING(Phone, 5, 6), Suffix = RIGHT(Phone, 3)GO-- remove the old columnALTER TABLE PhoneNumbers DROP COLUMN PhoneGO-- This returns unexpected results!-- it returns 2 columns ID and Phone even though -- we don't have a Phone column anymore.-- Notice that the data is from the Prefix column-- This is a danger of SELECT *SELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will FAIL -- for a fix we have to call sp_refreshview -- to refresh the view definitionEXEC sp_refreshview 'vPhoneNumbers'-- after the refresh the view returns 4 columns-- this breaks the input/output behavior of the database-- which refactoring MUST NOT doSELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will FAIL -- DoesViewReturnCorrectData test will FAIL -- to fix the input/output behavior change problem -- we have to concat the 3 columns into one named PhoneALTER VIEW vPhoneNumbersASSELECT ID, Prefix + ' ' + Number + ' ' + Suffix AS PhoneFROM PhoneNumbersGO-- now it works as expectedSELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will SUCCEED -- clean upDROP VIEW vPhoneNumbersDROP TABLE PhoneNumbers [Test]public void DoesViewReturnCoorectColumns(){ // conn is a valid SqlConnection to the server's tempdb // note the SET FMTONLY ON with which we return only schema and no data using (SqlCommand cmd = new SqlCommand("SET FMTONLY ON; SELECT * FROM vPhoneNumbers", conn)) { DataTable dt = new DataTable(); dt.Load(cmd.ExecuteReader(CommandBehavior.CloseConnection)); // test returned schema: number of columns, column names and data types Assert.AreEqual(dt.Columns.Count, 2); Assert.AreEqual(dt.Columns[0].Caption, "ID"); Assert.AreEqual(dt.Columns[0].DataType, typeof(int)); Assert.AreEqual(dt.Columns[1].Caption, "Phone"); Assert.AreEqual(dt.Columns[1].DataType, typeof(string)); }} [Test]public void DoesViewReturnCorrectData(){ // conn is a valid SqlConnection to the server's tempdb using (SqlCommand cmd = new SqlCommand("SELECT * FROM vPhoneNumbers", conn)) { DataTable dt = new DataTable(); dt.Load(cmd.ExecuteReader(CommandBehavior.CloseConnection)); // test returned data: number of rows and their values Assert.AreEqual(dt.Rows.Count, 2); Assert.AreEqual(dt.Rows[0]["ID"], 1); Assert.AreEqual(dt.Rows[0]["Phone"], "111 222333 444"); Assert.AreEqual(dt.Rows[1]["ID"], 2); Assert.AreEqual(dt.Rows[1]["Phone"], "555 666777 888"); }}   With this simple example we’ve seen how a very simple schema can cause a lot of problems in the whole application/database system if it doesn’t have tests. Imagine what would happen if some outside process would depend on that view. It would get wrong data and propagate it silently throughout the system. And that is not good. So have tests at least for the crucial parts of your systems. And with that we conclude the Database Testing and Refactoring week at SQL University. Hope you learned something new and enjoy the learning weeks to come. Have fun!

  Read the article

• The blocking nature of aggregates

  - by Rob Farley

  I wrote a post recently about how query tuning isn’t just about how quickly the query runs – that if you have something (such as SSIS) that is consuming your data (and probably introducing a bottleneck), then it might be more important to have a query which focuses on getting the first bit of data out. You can read that post here.  In particular, we looked at two operators that could be used to ensure that a query returns only Distinct rows. and The Sort operator pulls in all the data, sorts it (discarding duplicates), and then pushes out the remaining rows. The Hash Match operator performs a Hashing function on each row as it comes in, and then looks to see if it’s created a Hash it’s seen before. If not, it pushes the row out. The Sort method is quicker, but has to wait until it’s gathered all the data before it can do the sort, and therefore blocks the data flow. But that was my last post. This one’s a bit different. This post is going to look at how Aggregate functions work, which ties nicely into this month’s T-SQL Tuesday. I’ve frequently explained about the fact that DISTINCT and GROUP BY are essentially the same function, although DISTINCT is the poorer cousin because you have less control over it, and you can’t apply aggregate functions. Just like the operators used for Distinct, there are different flavours of Aggregate operators – coming in blocking and non-blocking varieties. The example I like to use to explain this is a pile of playing cards. If I’m handed a pile of cards and asked to count how many cards there are in each suit, it’s going to help if the cards are already ordered. Suppose I’m playing a game of Bridge, I can easily glance at my hand and count how many there are in each suit, because I keep the pile of cards in order. Moving from left to right, I could tell you I have four Hearts in my hand, even before I’ve got to the end. By telling you that I have four Hearts as soon as I know, I demonstrate the principle of a non-blocking operation. This is known as a Stream Aggregate operation. It requires input which is sorted by whichever columns the grouping is on, and it will release a row as soon as the group changes – when I encounter a Spade, I know I don’t have any more Hearts in my hand. Alternatively, if the pile of cards are not sorted, I won’t know how many Hearts I have until I’ve looked through all the cards. In fact, to count them, I basically need to put them into little piles, and when I’ve finished making all those piles, I can count how many there are in each. Because I don’t know any of the final numbers until I’ve seen all the cards, this is blocking. This performs the aggregate function using a Hash Match. Observant readers will remember this from my Distinct example. You might remember that my earlier Hash Match operation – used for Distinct Flow – wasn’t blocking. But this one is. They’re essentially doing a similar operation, applying a Hash function to some data and seeing if the set of values have been seen before, but before, it needs more information than the mere existence of a new set of values, it needs to consider how many of them there are. A lot is dependent here on whether the data coming out of the source is sorted or not, and this is largely determined by the indexes that are being used. If you look in the Properties of an Index Scan, you’ll be able to see whether the order of the data is required by the plan. A property called Ordered will demonstrate this. In this particular example, the second plan is significantly faster, but is dependent on having ordered data. In fact, if I force a Stream Aggregate on unordered data (which I’m doing by telling it to use a different index), a Sort operation is needed, which makes my plan a lot slower. This is all very straight-forward stuff, and information that most people are fully aware of. I’m sure you’ve all read my good friend Paul White (@sql_kiwi)’s post on how the Query Optimizer chooses which type of aggregate function to apply. But let’s take a look at SQL Server Integration Services. SSIS gives us a Aggregate transformation for use in Data Flow Tasks, but it’s described as Blocking. The definitive article on Performance Tuning SSIS uses Sort and Aggregate as examples of Blocking Transformations. I’ve just shown you that Aggregate operations used by the Query Optimizer are not always blocking, but that the SSIS Aggregate component is an example of a blocking transformation. But is it always the case? After all, there are plenty of SSIS Performance Tuning talks out there that describe the value of sorted data in Data Flow Tasks, describing the IsSorted property that can be set through the Advanced Editor of your Source component. And so I set about testing the Aggregate transformation in SSIS, to prove for sure whether providing Sorted data would let the Aggregate transform behave like a Stream Aggregate. (Of course, I knew the answer already, but it helps to be able to demonstrate these things). A query that will produce a million rows in order was in order. Let me rephrase. I used a query which produced the numbers from 1 to 1000000, in a single field, ordered. The IsSorted flag was set on the source output, with the only column as SortKey 1. Performing an Aggregate function over this (counting the number of rows per distinct number) should produce an additional column with 1 in it. If this were being done in T-SQL, the ordered data would allow a Stream Aggregate to be used. In fact, if the Query Optimizer saw that the field had a Unique Index on it, it would be able to skip the Aggregate function completely, and just insert the value 1. This is a shortcut I wouldn’t be expecting from SSIS, but certainly the Stream behaviour would be nice. Unfortunately, it’s not the case. As you can see from the screenshots above, the data is pouring into the Aggregate function, and not being released until all million rows have been seen. It’s not doing a Stream Aggregate at all. This is expected behaviour. (I put that in bold, because I want you to realise this.) An SSIS transformation is a piece of code that runs. It’s a physical operation. When you write T-SQL and ask for an aggregation to be done, it’s a logical operation. The physical operation is either a Stream Aggregate or a Hash Match. In SSIS, you’re telling the system that you want a generic Aggregation, that will have to work with whatever data is passed in. I’m not saying that it wouldn’t be possible to make a sometimes-blocking aggregation component in SSIS. A Custom Component could be created which could detect whether the SortKeys columns of the input matched the Grouping columns of the Aggregation, and either call the blocking code or the non-blocking code as appropriate. One day I’ll make one of those, and publish it on my blog. I’ve done it before with a Script Component, but as Script components are single-use, I was able to handle the data knowing everything about my data flow already. As per my previous post – there are a lot of aspects in which tuning SSIS and tuning execution plans use similar concepts. In both situations, it really helps to have a feel for what’s going on behind the scenes. Considering whether an operation is blocking or not is extremely relevant to performance, and that it’s not always obvious from the surface. In a future post, I’ll show the impact of blocking v non-blocking and synchronous v asynchronous components in SSIS, using some of LobsterPot’s Script Components and Custom Components as examples. When I get that sorted, I’ll make a Stream Aggregate component available for download.

  Read the article

• The blocking nature of aggregates

  - by Rob Farley

  I wrote a post recently about how query tuning isn’t just about how quickly the query runs – that if you have something (such as SSIS) that is consuming your data (and probably introducing a bottleneck), then it might be more important to have a query which focuses on getting the first bit of data out. You can read that post here.  In particular, we looked at two operators that could be used to ensure that a query returns only Distinct rows. and The Sort operator pulls in all the data, sorts it (discarding duplicates), and then pushes out the remaining rows. The Hash Match operator performs a Hashing function on each row as it comes in, and then looks to see if it’s created a Hash it’s seen before. If not, it pushes the row out. The Sort method is quicker, but has to wait until it’s gathered all the data before it can do the sort, and therefore blocks the data flow. But that was my last post. This one’s a bit different. This post is going to look at how Aggregate functions work, which ties nicely into this month’s T-SQL Tuesday. I’ve frequently explained about the fact that DISTINCT and GROUP BY are essentially the same function, although DISTINCT is the poorer cousin because you have less control over it, and you can’t apply aggregate functions. Just like the operators used for Distinct, there are different flavours of Aggregate operators – coming in blocking and non-blocking varieties. The example I like to use to explain this is a pile of playing cards. If I’m handed a pile of cards and asked to count how many cards there are in each suit, it’s going to help if the cards are already ordered. Suppose I’m playing a game of Bridge, I can easily glance at my hand and count how many there are in each suit, because I keep the pile of cards in order. Moving from left to right, I could tell you I have four Hearts in my hand, even before I’ve got to the end. By telling you that I have four Hearts as soon as I know, I demonstrate the principle of a non-blocking operation. This is known as a Stream Aggregate operation. It requires input which is sorted by whichever columns the grouping is on, and it will release a row as soon as the group changes – when I encounter a Spade, I know I don’t have any more Hearts in my hand. Alternatively, if the pile of cards are not sorted, I won’t know how many Hearts I have until I’ve looked through all the cards. In fact, to count them, I basically need to put them into little piles, and when I’ve finished making all those piles, I can count how many there are in each. Because I don’t know any of the final numbers until I’ve seen all the cards, this is blocking. This performs the aggregate function using a Hash Match. Observant readers will remember this from my Distinct example. You might remember that my earlier Hash Match operation – used for Distinct Flow – wasn’t blocking. But this one is. They’re essentially doing a similar operation, applying a Hash function to some data and seeing if the set of values have been seen before, but before, it needs more information than the mere existence of a new set of values, it needs to consider how many of them there are. A lot is dependent here on whether the data coming out of the source is sorted or not, and this is largely determined by the indexes that are being used. If you look in the Properties of an Index Scan, you’ll be able to see whether the order of the data is required by the plan. A property called Ordered will demonstrate this. In this particular example, the second plan is significantly faster, but is dependent on having ordered data. In fact, if I force a Stream Aggregate on unordered data (which I’m doing by telling it to use a different index), a Sort operation is needed, which makes my plan a lot slower. This is all very straight-forward stuff, and information that most people are fully aware of. I’m sure you’ve all read my good friend Paul White (@sql_kiwi)’s post on how the Query Optimizer chooses which type of aggregate function to apply. But let’s take a look at SQL Server Integration Services. SSIS gives us a Aggregate transformation for use in Data Flow Tasks, but it’s described as Blocking. The definitive article on Performance Tuning SSIS uses Sort and Aggregate as examples of Blocking Transformations. I’ve just shown you that Aggregate operations used by the Query Optimizer are not always blocking, but that the SSIS Aggregate component is an example of a blocking transformation. But is it always the case? After all, there are plenty of SSIS Performance Tuning talks out there that describe the value of sorted data in Data Flow Tasks, describing the IsSorted property that can be set through the Advanced Editor of your Source component. And so I set about testing the Aggregate transformation in SSIS, to prove for sure whether providing Sorted data would let the Aggregate transform behave like a Stream Aggregate. (Of course, I knew the answer already, but it helps to be able to demonstrate these things). A query that will produce a million rows in order was in order. Let me rephrase. I used a query which produced the numbers from 1 to 1000000, in a single field, ordered. The IsSorted flag was set on the source output, with the only column as SortKey 1. Performing an Aggregate function over this (counting the number of rows per distinct number) should produce an additional column with 1 in it. If this were being done in T-SQL, the ordered data would allow a Stream Aggregate to be used. In fact, if the Query Optimizer saw that the field had a Unique Index on it, it would be able to skip the Aggregate function completely, and just insert the value 1. This is a shortcut I wouldn’t be expecting from SSIS, but certainly the Stream behaviour would be nice. Unfortunately, it’s not the case. As you can see from the screenshots above, the data is pouring into the Aggregate function, and not being released until all million rows have been seen. It’s not doing a Stream Aggregate at all. This is expected behaviour. (I put that in bold, because I want you to realise this.) An SSIS transformation is a piece of code that runs. It’s a physical operation. When you write T-SQL and ask for an aggregation to be done, it’s a logical operation. The physical operation is either a Stream Aggregate or a Hash Match. In SSIS, you’re telling the system that you want a generic Aggregation, that will have to work with whatever data is passed in. I’m not saying that it wouldn’t be possible to make a sometimes-blocking aggregation component in SSIS. A Custom Component could be created which could detect whether the SortKeys columns of the input matched the Grouping columns of the Aggregation, and either call the blocking code or the non-blocking code as appropriate. One day I’ll make one of those, and publish it on my blog. I’ve done it before with a Script Component, but as Script components are single-use, I was able to handle the data knowing everything about my data flow already. As per my previous post – there are a lot of aspects in which tuning SSIS and tuning execution plans use similar concepts. In both situations, it really helps to have a feel for what’s going on behind the scenes. Considering whether an operation is blocking or not is extremely relevant to performance, and that it’s not always obvious from the surface. In a future post, I’ll show the impact of blocking v non-blocking and synchronous v asynchronous components in SSIS, using some of LobsterPot’s Script Components and Custom Components as examples. When I get that sorted, I’ll make a Stream Aggregate component available for download.

  Read the article

• Writing the tests for FluentPath

  - by Bertrand Le Roy

  Writing the tests for FluentPath is a challenge. The library is a wrapper around a legacy API (System.IO) that wasn’t designed to be easily testable. If it were more testable, the sensible testing methodology would be to tell System.IO to act against a mock file system, which would enable me to verify that my code is doing the expected file system operations without having to manipulate the actual, physical file system: what we are testing here is FluentPath, not System.IO. Unfortunately, that is not an option as nothing in System.IO enables us to plug a mock file system in. As a consequence, we are left with few options. A few people have suggested me to abstract my calls to System.IO away so that I could tell FluentPath – not System.IO – to use a mock instead of the real thing. That in turn is getting a little silly: FluentPath already is a thin abstraction around System.IO, so layering another abstraction between them would double the test surface while bringing little or no value. I would have to test that new abstraction layer, and that would bring us back to square one. Unless I’m missing something, the only option I have here is to bite the bullet and test against the real file system. Of course, the tests that do that can hardly be called unit tests. They are more integration tests as they don’t only test bits of my code. They really test the successful integration of my code with the underlying System.IO. In order to write such tests, the techniques of BDD work particularly well as they enable you to express scenarios in natural language, from which test code is generated. Integration tests are being better expressed as scenarios orchestrating a few basic behaviors, so this is a nice fit. The Orchard team has been successfully using SpecFlow for integration tests for a while and I thought it was pretty cool so that’s what I decided to use. Consider for example the following scenario: Scenario: Change extension Given a clean test directory When I change the extension of bar\notes.txt to foo Then bar\notes.txt should not exist And bar\notes.foo should exist This is human readable and tells you everything you need to know about what you’re testing, but it is also executable code. What happens when SpecFlow compiles this scenario is that it executes a bunch of regular expressions that identify the known Given (set-up phases), When (actions) and Then (result assertions) to identify the code to run, which is then translated into calls into the appropriate methods. Nothing magical. Here is the code generated by SpecFlow: [NUnit.Framework.TestAttribute()] [NUnit.Framework.DescriptionAttribute("Change extension")] public virtual void ChangeExtension() { TechTalk.SpecFlow.ScenarioInfo scenarioInfo = new TechTalk.SpecFlow.ScenarioInfo("Change extension", ((string[])(null))); #line 6 this.ScenarioSetup(scenarioInfo); #line 7 testRunner.Given("a clean test directory"); #line 8 testRunner.When("I change the extension of " + "bar\\notes.txt to foo"); #line 9 testRunner.Then("bar\\notes.txt should not exist"); #line 10 testRunner.And("bar\\notes.foo should exist"); #line hidden testRunner.CollectScenarioErrors();} The #line directives are there to give clues to the debugger, because yes, you can put breakpoints into a scenario: The way you usually write tests with SpecFlow is that you write the scenario first, let it fail, then write the translation of your Given, When and Then into code if they don’t already exist, which results in running but failing tests, and then you write the code to make your tests pass (you implement the scenario). In the case of FluentPath, I built a simple Given method that builds a simple file hierarchy in a temporary directory that all scenarios are going to work with: [Given("a clean test directory")] public void GivenACleanDirectory() { _path = new Path(SystemIO.Path.GetTempPath()) .CreateSubDirectory("FluentPathSpecs") .MakeCurrent(); _path.GetFileSystemEntries() .Delete(true); _path.CreateFile("foo.txt", "This is a text file named foo."); var bar = _path.CreateSubDirectory("bar"); bar.CreateFile("baz.txt", "bar baz") .SetLastWriteTime(DateTime.Now.AddSeconds(-2)); bar.CreateFile("notes.txt", "This is a text file containing notes."); var barbar = bar.CreateSubDirectory("bar"); barbar.CreateFile("deep.txt", "Deep thoughts"); var sub = _path.CreateSubDirectory("sub"); sub.CreateSubDirectory("subsub"); sub.CreateFile("baz.txt", "sub baz") .SetLastWriteTime(DateTime.Now); sub.CreateFile("binary.bin", new byte[] {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0xFF}); } Then, to implement the scenario that you can read above, I had to write the following When: [When("I change the extension of (.*) to (.*)")] public void WhenIChangeTheExtension( string path, string newExtension) { var oldPath = Path.Current.Combine(path.Split('\\')); oldPath.Move(p => p.ChangeExtension(newExtension)); } As you can see, the When attribute is specifying the regular expression that will enable the SpecFlow engine to recognize what When method to call and also how to map its parameters. For our scenario, “bar\notes.txt” will get mapped to the path parameter, and “foo” to the newExtension parameter. And of course, the code that verifies the assumptions of the scenario: [Then("(.*) should exist")] public void ThenEntryShouldExist(string path) { Assert.IsTrue(_path.Combine(path.Split('\\')).Exists); } [Then("(.*) should not exist")] public void ThenEntryShouldNotExist(string path) { Assert.IsFalse(_path.Combine(path.Split('\\')).Exists); } These steps should be written with reusability in mind. They are building blocks for your scenarios, not implementation of a specific scenario. Think small and fine-grained. In the case of the above steps, I could reuse each of those steps in other scenarios. Those tests are easy to write and easier to read, which means that they also constitute a form of documentation. Oh, and SpecFlow is just one way to do this. Rob wrote a long time ago about this sort of thing (but using a different framework) and I highly recommend this post if I somehow managed to pique your interest: http://blog.wekeroad.com/blog/make-bdd-your-bff-2/ And this screencast (Rob always makes excellent screencasts): http://blog.wekeroad.com/mvc-storefront/kona-3/ (click the “Download it here” link)

  Read the article

• The Shift: how Orchard painlessly shifted to document storage, and how it’ll affect you

  - by Bertrand Le Roy

  We’ve known it all along. The storage for Orchard content items would be much more efficient using a document database than a relational one. Orchard content items are composed of parts that serialize naturally into infoset kinds of documents. Storing them as relational data like we’ve done so far was unnatural and requires the data for a single item to span multiple tables, related through 1-1 relationships. This means lots of joins in queries, and a great potential for Select N+1 problems. Document databases, unfortunately, are still a tough sell in many places that prefer the more familiar relational model. Being able to x-copy Orchard to hosters has also been a basic constraint in the design of Orchard. Combine those with the necessity at the time to run in medium trust, and with license compatibility issues, and you’ll find yourself with very few reasonable choices. So we went, a little reluctantly, for relational SQL stores, with the dream of one day transitioning to document storage. We have played for a while with the idea of building our own document storage on top of SQL databases, and Sébastien implemented something more than decent along those lines, but we had a better way all along that we didn’t notice until recently… In Orchard, there are fields, which are named properties that you can add dynamically to a content part. Because they are so dynamic, we have been storing them as XML into a column on the main content item table. This infoset storage and its associated API are fairly generic, but were only used for fields. The breakthrough was when Sébastien realized how this existing storage could give us the advantages of document storage with minimal changes, while continuing to use relational databases as the substrate. public bool CommercialPrices { get { return this.Retrieve(p => p.CommercialPrices); } set { this.Store(p => p.CommercialPrices, value); } } This code is very compact and efficient because the API can infer from the expression what the type and name of the property are. It is then able to do the proper conversions for you. For this code to work in a content part, there is no need for a record at all. This is particularly nice for site settings: one query on one table and you get everything you need. This shows how the existing infoset solves the data storage problem, but you still need to query. Well, for those properties that need to be filtered and sorted on, you can still use the current record-based relational system. This of course continues to work. We do however provide APIs that make it trivial to store into both record properties and the infoset storage in one operation: public double Price { get { return Retrieve(r => r.Price); } set { Store(r => r.Price, value); } } This code looks strikingly similar to the non-record case above. The difference is that it will manage both the infoset and the record-based storages. The call to the Store method will send the data in both places, keeping them in sync. The call to the Retrieve method does something even cooler: if the property you’re looking for exists in the infoset, it will return it, but if it doesn’t, it will automatically look into the record for it. And if that wasn’t cool enough, it will take that value from the record and store it into the infoset for the next time it’s required. This means that your data will start automagically migrating to infoset storage just by virtue of using the code above instead of the usual: public double Price { get { return Record.Price; } set { Record.Price = value; } } As your users browse the site, it will get faster and faster as Select N+1 issues will optimize themselves away. If you preferred, you could still have explicit migration code, but it really shouldn’t be necessary most of the time. If you do already have code using QueryHints to mitigate Select N+1 issues, you might want to reconsider those, as with the new system, you’ll want to avoid joins that you don’t need for filtering or sorting, further optimizing your queries. There are some rare cases where the storage of the property must be handled differently. Check out this string[] property on SearchSettingsPart for example: public string[] SearchedFields { get { return (Retrieve<string>("SearchedFields") ?? "") .Split(new[] {',', ' '}, StringSplitOptions.RemoveEmptyEntries); } set { Store("SearchedFields", String.Join(", ", value)); } } The array of strings is transformed by the property accessors into and from a comma-separated list stored in a string. The Retrieve and Store overloads used in this case are lower-level versions that explicitly specify the type and name of the attribute to retrieve or store. You may be wondering what this means for code or operations that look directly at the database tables instead of going through the new infoset APIs. Even if there is a record, the infoset version of the property will win if it exists, so it is necessary to keep the infoset up-to-date. It’s not very complicated, but definitely something to keep in mind. Here is what a product record looks like in Nwazet.Commerce for example: And here is the same data in the infoset: The infoset is stored in Orchard_Framework_ContentItemRecord or Orchard_Framework_ContentItemVersionRecord, depending on whether the content type is versionable or not. A good way to find what you’re looking for is to inspect the record table first, as it’s usually easier to read, and then get the item record of the same id. Here is the detailed XML document for this product: <Data> <ProductPart Inventory="40" Price="18" Sku="pi-camera-box" OutOfStockMessage="" AllowBackOrder="false" Weight="0.2" Size="" ShippingCost="null" IsDigital="false" /> <ProductAttributesPart Attributes="" /> <AutoroutePart DisplayAlias="camera-box" /> <TitlePart Title="Nwazet Pi Camera Box" /> <BodyPart Text="[...]" /> <CommonPart CreatedUtc="2013-09-10T00:39:00Z" PublishedUtc="2013-09-14T01:07:47Z" /> </Data> The data is neatly organized under each part. It is easy to see how that document is all you need to know about that content item, all in one table. If you want to modify that data directly in the database, you should be careful to do it in both the record table and the infoset in the content item record. In this configuration, the record is now nothing more than an index, and will only be used for sorting and filtering. Of course, it’s perfectly fine to mix record-backed properties and record-less properties on the same part. It really depends what you think must be sorted and filtered on. In turn, this potentially simplifies migrations considerably. So here it is, the great shift of Orchard to document storage, something that Orchard has been designed for all along, and that we were able to implement with a satisfying and surprising economy of resources. Expect this code to make its way into the 1.8 version of Orchard when that’s available.

  Read the article

• Emit Knowledge - social network for knowledge sharing

  - by hajan

  Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

  Read the article

• Use BGInfo to Build a Database of System Information of Your Network Computers

  - by Sysadmin Geek

  One of the more popular tools of the Sysinternals suite among system administrators is BGInfo which tacks real-time system information to your desktop wallpaper when you first login. For obvious reasons, having information such as system memory, available hard drive space and system up time (among others) right in front of you is very convenient when you are managing several systems. A little known feature about this handy utility is the ability to have system information automatically saved to a SQL database or some other data file. With a few minutes of setup work you can easily configure BGInfo to record system information of all your network computers in a centralized storage location. You can then use this data to monitor or report on these systems however you see fit. BGInfo Setup If you are familiar with BGInfo, you can skip this section. However, if you have never used this tool, it takes just a few minutes to setup in order to capture the data you are looking for. When you first open BGInfo, a timer will be counting down in the upper right corner. Click the countdown button to keep the interface up so we can edit the settings. Now edit the information you want to capture from the available fields on the right. Since all the output will be redirected to a central location, don’t worry about configuring the layout or formatting. Configuring the Storage Database BGInfo supports the ability to store information in several database formats: SQL Server Database, Access Database, Excel and Text File. To configure this option, open File > Database. Using a Text File The simplest, and perhaps most practical, option is to store the BGInfo data in a comma separated text file. This format allows for the file to be opened in Excel or imported into a database. To use a text file or any other file system type (Excel or MS Access), simply provide the UNC to the respective file. The account running the task to write to this file will need read/write access to both the share and NTFS file permissions. When using a text file, the only option is to have BGInfo create a new entry each time the capture process is run which will add a new line to the respective CSV text file. Using a SQL Database If you prefer to have the data dropped straight into a SQL Server database, BGInfo support this as well. This requires a bit of additional configuration, but overall it is very easy. The first step is to create a database where the information will be stored. Additionally, you will want to create a user account to fill data into this table (and this table only). For your convenience, this script creates a new database and user account (run this as Administrator on your SQL Server machine): @SET Server=%ComputerName%.@SET Database=BGInfo@SET UserName=BGInfo@SET Password=passwordSQLCMD -S “%Server%” -E -Q “Create Database [%Database%]“SQLCMD -S “%Server%” -E -Q “Create Login [%UserName%] With Password=N’%Password%’, DEFAULT_DATABASE=[%Database%], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF”SQLCMD -S “%Server%” -E -d “%Database%” -Q “Create User [%UserName%] For Login [%UserName%]“SQLCMD -S “%Server%” -E -d “%Database%” -Q “EXEC sp_addrolemember N’db_owner’, N’%UserName%’” Note the SQL user account must have ‘db_owner’ permissions on the database in order for BGInfo to work correctly. This is why you should have a SQL user account specifically for this database. Next, configure BGInfo to connect to this database by clicking on the SQL button. Fill out the connection properties according to your database settings. Select the option of whether or not to only have one entry per computer or keep a history of each system. The data will then be dropped directly into a table named “BGInfoTable” in the respective database.   Configure User Desktop Options While the primary function of BGInfo is to alter the user’s desktop by adding system info as part of the wallpaper, for our use here we want to leave the user’s wallpaper alone so this process runs without altering any of the user’s settings. Click the Desktops button. Configure the Wallpaper modifications to not alter anything.   Preparing the Deployment Now we are all set for deploying the configuration to the individual machines so we can start capturing the system data. If you have not done so already, click the Apply button to create the first entry in your data repository. If all is configured correctly, you should be able to open your data file or database and see the entry for the respective machine. Now click the File > Save As menu option and save the configuration as “BGInfoCapture.bgi”.   Deploying to Client Machines Deployment to the respective client machines is pretty straightforward. No installation is required as you just need to copy the BGInfo.exe and the BGInfoCapture.bgi to each machine and place them in the same directory. Once in place, just run the command: BGInfo.exe BGInfoCapture.bgi /Timer:0 /Silent /NoLicPrompt Of course, you probably want to schedule the capture process to run on a schedule. This command creates a Scheduled Task to run the capture process at 8 AM every morning and assumes you copied the required files to the root of your C drive: SCHTASKS /Create /SC DAILY /ST 08:00 /TN “System Info” /TR “C:\BGInfo.exe C:\BGInfoCapture.bgi /Timer:0 /Silent /NoLicPrompt” Adjust as needed, but the end result is the scheduled task command should look something like this:   Download BGInfo from Sysinternals Latest Features How-To Geek ETC How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? How to Use and Master the Notoriously Difficult Pen Tool in Photoshop HTG Explains: What Are the Differences Between All Those Audio Formats? How To Use Layer Masks and Vector Masks to Remove Complex Backgrounds in Photoshop Bring Summer Back to Your Desktop with the LandscapeTheme for Chrome and Iron The Prospector – Home Dash Extension Creates a Whole New Browsing Experience in Firefox KinEmote Links Kinect to Windows Why Nobody Reads Web Site Privacy Policies [Infographic] Asian Temple in the Snow Wallpaper 10 Weird Gaming Records from the Guinness Book

  Read the article

• The Data Scientist

  - by BuckWoody

  A new term - well, perhaps not that new - has come up and I’m actually very excited about it. The term is Data Scientist, and since it’s new, it’s fairly undefined. I’ll explain what I think it means, and why I’m excited about it. In general, I’ve found the term deals at its most basic with analyzing data. Of course, we all do that, and the term itself in that definition is redundant. There is no science that I know of that does not work with analyzing lots of data. But the term seems to refer to more than the common practices of looking at data visually, putting it in a spreadsheet or report, or even using simple coding to examine data sets. The term Data Scientist (as far as I can make out this early in it’s use) is someone who has a strong understanding of data sources, relevance (statistical and otherwise) and processing methods as well as front-end displays of large sets of complicated data. Some - but not all - Business Intelligence professionals have these skills. In other cases, senior developers, database architects or others fill these needs, but in my experience, many lack the strong mathematical skills needed to make these choices properly. I’ve divided the knowledge base for someone that would wear this title into three large segments. It remains to be seen if a given Data Scientist would be responsible for knowing all these areas or would specialize. There are pretty high requirements on the math side, specifically in graduate-degree level statistics, but in my experience a company will only have a few of these folks, so they are expected to know quite a bit in each of these areas. Persistence The first area is finding, cleaning and storing the data. In some cases, no cleaning is done prior to storage - it’s just identified and the cleansing is done in a later step. This area is where the professional would be able to tell if a particular data set should be stored in a Relational Database Management System (RDBMS), across a set of key/value pair storage (NoSQL) or in a file system like HDFS (part of the Hadoop landscape) or other methods. Or do you examine the stream of data without storing it in another system at all? This is an important decision - it’s a foundation choice that deals not only with a lot of expense of purchasing systems or even using Cloud Computing (PaaS, SaaS or IaaS) to source it, but also the skillsets and other resources needed to care and feed the system for a long time. The Data Scientist sets something into motion that will probably outlast his or her career at a company or organization. Often these choices are made by senior developers, database administrators or architects in a company. But sometimes each of these has a certain bias towards making a decision one way or another. The Data Scientist would examine these choices in light of the data itself, starting perhaps even before the business requirements are created. The business may not even be aware of all the strategic and tactical data sources that they have access to. Processing Once the decision is made to store the data, the next set of decisions are based around how to process the data. An RDBMS scales well to a certain level, and provides a high degree of ACID compliance as well as offering a well-known set-based language to work with this data. In other cases, scale should be spread among multiple nodes (as in the case of Hadoop landscapes or NoSQL offerings) or even across a Cloud provider like Windows Azure Table Storage. In fact, in many cases - most of the ones I’m dealing with lately - the data should be split among multiple types of processing environments. This is a newer idea. Many data professionals simply pick a methodology (RDBMS with Star Schemas, NoSQL, etc.) and put all data there, regardless of its shape, processing needs and so on. A Data Scientist is familiar not only with the various processing methods, but how they work, so that they can choose the right one for a given need. This is a huge time commitment, hence the need for a dedicated title like this one. Presentation This is where the need for a Data Scientist is most often already being filled, sometimes with more or less success. The latest Business Intelligence systems are quite good at allowing you to create amazing graphics - but it’s the data behind the graphics that are the most important component of truly effective displays. This is where the mathematics requirement of the Data Scientist title is the most unforgiving. In fact, someone without a good foundation in statistics is not a good candidate for creating reports. Even a basic level of statistics can be dangerous. Anyone who works in analyzing data will tell you that there are multiple errors possible when data just seems right - and basic statistics bears out that you’re on the right track - that are only solvable when you understanding why the statistical formula works the way it does. And there are lots of ways of presenting data. Sometimes all you need is a “yes” or “no” answer that can only come after heavy analysis work. In that case, a simple e-mail might be all the reporting you need. In others, complex relationships and multiple components require a deep understanding of the various graphical methods of presenting data. Knowing which kind of chart, color, graphic or shape conveys a particular datum best is essential knowledge for the Data Scientist. Why I’m excited I love this area of study. I like math, stats, and computing technologies, but it goes beyond that. I love what data can do - how it can help an organization. I’ve been fortunate enough in my professional career these past two decades to work with lots of folks who perform this role at companies from aerospace to medical firms, from manufacturing to retail. Interestingly, the size of the company really isn’t germane here. I worked with one very small bio-tech (cryogenics) company that worked deeply with analysis of complex interrelated data. So  watch this space. No, I’m not leaving Azure or distributed computing or Microsoft. In fact, I think I’m perfectly situated to investigate this role further. We have a huge set of tools, from RDBMS to Hadoop to allow me to explore. And I’m happy to share what I learn along the way.

  Read the article

< Previous Page | 326 327 328 329 330 331 332 333 334 335 336 337  | Next Page >