Search Results

Search found 9147 results on 366 pages for 'big smile'.

Page 331/366 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• My error with upgrading 4.0 to 4.2- What NOT to do...

  - by Steve Tunstall

  Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code.   Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine.  So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time.  So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable.  Lesson learned.  By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

  Read the article

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• Books are Dead! Long Live the Books!

  - by smisner

  We live in interesting times with regard to the availability of technical material. We have lots of free written material online in the form of vendor documentation online, forums, blogs, and Twitter. And we have written material that we can buy in the form of books, magazines, and training materials. Online videos and training – some free and some not free – are also an option. All of these formats are useful for one need or another. As an author, I pay particular attention to the demand for books, and for now I see no reason to stop authoring books. I assure you that I don’t get rich from the effort, and fortunately that is not my motivation. As someone who likes to refer to books frequently, I am still a big believer in books and have evidence from book sales that there are others like me. If I can do my part to help others learn about the technologies I work with, I will continue to produce content in a variety of formats, including books. (You can view a list of all of my books on the Publications page of my site and my online training videos at Pluralsight.) As a consumer of technical information, I prefer books because a book typically can get into a topic much more deeply than a blog post, and can provide more context than vendor documentation. It comes with a table of contents and a (hopefully accurate) index that helps me zero in on a topic of interest, and of course I can use the Search feature in digital form. Some people suggest that technology books are outdated as soon as they get published. I guess it depends on where you are with technology. Not everyone is able to upgrade to the latest and greatest version at release. I do assume, however, that the SQL Server 7.0 titles in my library have little value for me now, but I’m certain that the minute I discard the book, I’m going to want it for some reason! Meanwhile, as electronic books overtake physical books in sales, my husband is grateful that I can continue to build my collection digitally rather than physically as the books have a way of taking over significant square footage in our house! Blog posts, on the other hand, are useful for describing the scenarios that come up in real-life implementations that wouldn’t fit neatly into a book. As many years that I have working with the Microsoft BI stack, I still run into new problems that require creative thinking. Likewise, people who work with BI and other technologies that I use share what they learn through their blogs. Internet search engines help us find information in blogs that simply isn’t available anywhere else. Another great thing about blogs, also, is the connection to community and the dialog that can ensue between people with common interests. With the trend towards electronic formats for books, I imagine that we’ll see books continue to adapt to incorporate different forms of media and better ways to keep the information current. At the moment, I wish I had a better way to help readers with my last two Reporting Services books. In the case of the Microsoft® SQL Server™ 2005 Reporting Services Step by Step book, I have heard many cases of readers having problems with the sample database that shipped on CD – either the database was missing or it was corrupt. So I’ve provided a copy of the database on my site for download from http://datainspirations.com/uploads/rs2005sbsDW.zip. Then for the Microsoft® SQL Server™ 2008 Reporting Services Step by Step book, we decided to avoid the database problem by using the AdventureWorks2008 samples that Microsoft published on Codeplex (although code samples are still available on CD). We had this silly idea that the URL for the download would remain constant, but it seems that expectation was ill-founded. Currently, the sample database is found at http://msftdbprodsamples.codeplex.com/releases/view/37109 but I have no idea how long that will remain valid. My latest books (#9 and #10 which are milestones I never anticipated), Building Integrated Business Intelligence Solutions with SQL Server 2008 R2 and Office 2010 (McGraw Hill, 2011) and Business Intelligence in Microsoft SharePoint 2010 (Microsoft Press, 2011), will not ship with a CD, but will provide all code samples for download at a site maintained by the respective publishers. I expect that the URLs for the downloads for the book will remain valid, but there are lots of references to other sites that can change or disappear over time. Does that mean authors shouldn’t make reference to such sites? Personally, I think the benefits to be gained from including links are greater than the risks of the links becoming invalid at some point. Do you think the time for technology books has come to an end? Is the delivery of books in electronic format enough to keep them alive? If technological barriers were no object, what would make a book more valuable to you than other formats through which you can obtain information?

  Read the article

• Seizing the Moment with Mobility

  - by Divya Malik

  Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog.  Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

  Read the article

• Part 1 - Load Testing In The Cloud

  - by Tarun Arora

  Azure is fascinating, but even more fascinating is the marriage of Azure and TFS! Introduction Recently a client I worked for had 2 major business critical applications being delivered, with very little time budgeted for Performance testing, we immediately hit a bottleneck when the performance testing phase started, the in house infrastructure team could not support the hardware requirements in the short notice. It was suggested that the performance testing be performed on one of the QA environments which was a fraction of the production environment. This didn’t seem right, the team decided to turn to the cloud. The team took advantage of the elasticity offered by Azure, starting with a single test agent which was provisioned and ready for use with in 30 minutes the team scaled up to 17 test agents to perform a very comprehensive performance testing cycle. Issues were identified and resolved but the highlight was that the cost of running the ‘test rig’ proved to be less than if hosted on premise by the infrastructure team. Thank you for taking the time out to read this blog post, in the series of posts, I’ll try and cover the start to end of everything you need to know to use Azure to build your Test Rig in the cloud. But Why Azure? I have my own Data Centre… If the environment is provisioned in your own datacentre, - No matter what level of service agreement you may have with your infrastructure team there will be down time when the environment is patched - How fast can you scale up or down the environments (keeping the enterprise processes in mind) Administration, Cost, Flexibility and Scalability are the areas you would want to think around when taking the decision between your own Data Centre and Azure! How is Microsoft's Public Cloud Offering different from Amazon’s Public Cloud Offering? Microsoft's offering of the Cloud is a hybrid of Platform as a Service (PaaS) and Infrastructure as a Service (IaaS) which distinguishes Microsoft's offering from other providers such as Amazon (Amazon only offers IaaS). PaaS – Platform as a Service IaaS – Infrastructure as a Service Fills the needs of those who want to build and run custom applications as services. Similar to traditional hosting, where a business will use the hosted environment as a logical extension of the on-premises datacentre. A service provider offers a pre-configured, virtualized application server environment to which applications can be deployed by the development staff. Since the service providers manage the hardware (patching, upgrades and so forth), as well as application server uptime, the involvement of IT pros is minimized. On-demand scalability combined with hardware and application server management relieves developers from infrastructure concerns and allows them to focus on building applications. The servers (physical and virtual) are rented on an as-needed basis, and the IT professionals who manage the infrastructure have full control of the software configuration. This kind of flexibility increases the complexity of the IT environment, as customer IT professionals need to maintain the servers as though they are on-premises. The maintenance activities may include patching and upgrades of the OS and the application server, load balancing, failover clustering of database servers, backup and restoration, and any other activities that mitigate the risks of hardware and software failures.   The biggest advantage with PaaS is that you do not have to worry about maintaining the environment, you can focus all your time in solving the business problems with your solution rather than worrying about maintaining the environment. If you decide to use a VM Role on Azure, you are asking for IaaS, more on this later. A nice blog post here on the difference between Saas, PaaS and IaaS. Now that we are convinced why we should be turning to the cloud and why in specific Azure, let’s discuss about the Test Rig. The Load Test Rig – Topology Now the moment of truth, Of course a big part of getting value from cloud computing is identifying the most adequate workloads to take to the cloud, so I’ve decided to try to make a Load Testing rig where the Agents are running on Windows Azure.   I’ll talk you through the above Topology, - User: User kick starts the load test run from the developer workstation on premise. This passes the request to the Test Controller. - Test Controller: The Test Controller is on premise connected to the same domain as the developer workstation. As soon as the Test Controller receives the request it makes use of the Windows Azure Connect service to orchestrate the test responsibilities to all the Test Agents. The Windows Azure Connect endpoint software must be active on all Azure instances and on the Controller machine as well. This allows IP connectivity between them and, given that the firewall is properly configured, allows the Controller to send work loads to the agents. In parallel, the Controller will collect the performance data from the agents, using the traditional WMI mechanisms. - Test Agents: The Test Agents are on the Windows Azure Public Cloud, as soon as the test controller issues instructions to the test agents, the test agents start executing the load tests. The HTTP requests are issued against the web server on premise, the results are captured by the test agents. And finally the results are passed over to the controller. - Servers: The Web Server and DB Server are hosted on premise in the datacentre, this is usually the case with business critical applications, you probably want to manage them your self. Recap and What’s next? So, in the introduction in the series of blog posts on Load Testing in the cloud I highlighted why creating a test rig in the cloud is a good idea, what advantages does Windows Azure offer and the Test Rig topology that I will be using. I would also like to mention that i stumbled upon this [Video] on Azure in a nutshell, great watch if you are new to Windows Azure. In the next post I intend to start setting up the Load Test Environment and discuss pricing with respect to test agent machine types that will be used in the test rig. Hope you enjoyed this post, If you have any recommendations on things that I should consider or any questions or feedback, feel free to add to this blog post. Remember to subscribe to http://feeds.feedburner.com/TarunArora.  See you in Part II.   Share this post : CodeProject

  Read the article

• Loading XML file containing leading zeros with SSIS preserving the zeros

  - by Compudicted

  Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

  Read the article

• Provocative Tweets From the Dachis Social Business Summit

  - by Mike Stiles

  On June 20, all who follow social business and how social is changing how we do business and internal business structures, gathered in London for the Dachis Social Business Summit. In addition to Oracle SVP Product Development, Reggie Bradford, brands and thought leaders posed some thought-provoking ideas and figures. Here are some of the most oft-tweeted points, and our thoughts that they provoked. Tweet: The winners will be those who use data to improve performance.Thought: Everyone is dwelling on ROI. Why isn’t everyone dwelling on the opportunity to make their product or service better (as if that doesn’t have an effect on ROI)? Big data can improve you…let it. Tweet: High performance hinges on integrated teams that interact with each other.Thought: Team members may work well with each other, but does the team as a whole “get” what other teams are doing? That’s the key to an integrated, companywide workforce. (Internal social platforms can facilitate that by the way). Tweet: Performance improvements come from making the invisible visible.Thought: Many of the factors that drive customer behavior and decisions are invisible. Through social, customers are now showing us what we couldn’t see before…if we’re paying attention. Tweet: Games have continuous feedback, which is why they’re so engaging.  Apply that to business operations.Thought: You think your employees have an obligation to be 100% passionate and engaged at all times about making you richer. Think again. Like customers, they must be motivated. Visible insight that they’re advancing on their goals helps. Tweet: Who can add value to the data?  Data will tend to migrate to where it will be most effective.Thought: Not everybody needs all the data. One team will be able to make sense of, use, and add value to data that may be irrelevant to another team. Like a strategized football play, the data has to get sent to the spot on the field where it’s needed most. Tweet: The sale isn’t the light at the end of the tunnel, it’s the start of a new marketing cycle.Thought: Another reason the ROI question is fundamentally flawed. The sale is not the end of the potential return on investment. After-the-sale service and nurturing begins where the sales “victory” ends. Tweet: A dead sale is one that’s not shared.  People must be incentivized to share.Thought: Guess what, customers now know their value to you as marketers on your behalf. They’ll tell people about your product, but you’ve got to answer, “Why should I?” And you’ve got to answer it with something substantial, not lame trinkets. Tweet: Social user motivations are competition, affection, excellence and curiosity.Thought: Your followers will engage IF; they can get something for doing it, love your culture so much they want you to win, are consistently stunned at the perfection and coolness of your products, or have been stimulated enough to want to know more. Tweet: In Europe, 92% surveyed said they couldn’t care less about brands.Thought: Oh well, so much for loving you or being impressed enough with your products & service that they want you to win. We’ve got a long way to go. Tweet: A complaint is a gift.Thought: Our instinct where complaints are concerned is to a) not listen, b) dismiss the one who complains as a kook, c) make excuses, and d) reassure ourselves with internal group-think that they’re wrong and we’re right. It’s the perfect recipe for how to never, ever grow or get better. In a way, this customer cares more than you do. Tweet: 78% of consumers think peer recommendation is the best form of advertising.  Eventually, engagement is going to eat advertising.Thought: Why is peer recommendation best? Trust. If a friend tells me how great a movie was, I believe him. He has credibility with me. He’s seen it, and he could care less if I buy a ticket. He’s telling me it was awesome because he sincerely believes that it was.  That’s gold. Tweet: 86% of customers are willing to pay more for a better customer experience. Thought: This “how mad can we make our customers without losing them” strategy has to end. The customer experience has actual monetary value, money you’re probably leaving on the table. @mikestilesPhoto: stock.xchng

  Read the article

• What's My Problem? What's Your Problem?

  - by Jacek Ziabicki

  Software installers are not made for building demo environments. I can say this much after 12 years (on and off) of supporting my fellow sales consultants with environments for software demonstrations. When we release software, we include installation programs and procedures that are designed for use by our clients – to build a production environment and a limited number of testing, training and development environments. Different Objectives Your priorities when building an environment for client use vs. building a demo environment are very different. In a production environment, security, stability, and performance concerns are paramount. These environments are built on a specific server and rarely, if ever, moved to a different server or different network address. There is typically just one application running on a particular server (physical or virtual). Once built, the environment will be used for months or years at a time. Because of security considerations, the installation program wants to make these environments very specific to the organization using the software and the use case, encoding a fully qualified name of the server, or even the IP address on the network, in the configuration. So you either go through the installation procedure for each environment, or learn how to clone and reconfigure the software as a separate instance to build all your non-production environments. This may not matter much if the installation is as simple as clicking on the Setup program. But for enterprise applications, you have a number of configuration settings that you need to get just right – so whether you are installing from scratch or reconfiguring an existing installation, this requires both time and expertise in the particular piece of software. If you need a setup of several applications that are integrated to talk to one another, it is a whole new level of complexity. Now you need the expertise in all of the applications involved (plus the supporting technology products), and in addition to making each application work, you also have to configure the integration endpoints. Each application needs the URLs and credentials to call the integration layer, and the integration must be able to call each application. Then you have to make sure that each app has the right data so a business process initiated in one application can continue in the next. And, you will need to check that each application has the correct version and patch level for the integration to work. When building demo environments, your #1 concern is agility. If you can get away with a small number of long-running environments, you are lucky. More likely, you may get a request for a dedicated environment for a demonstration that is two weeks away: how quickly can you make this available so we still have the time to build the client-specific data? We are running a hands-on workshop next month, and we’ll need 15 instances of application X environment so each student can have a separate server for the exercises. We cannot connect to our data center from the client site, the client’s security policy won’t allow our VPN to go through – so we need a portable environment that we can bring with us. Our consultants need to be able to work at the hotel, airport, and the airplane, so we really want an environment that can run on a laptop. The client will need two playpen environments running in the cloud, accessible from their network, for a series of workshops that start two weeks from now. We have seen all of these scenarios and more. Here you would be much better served by a generic installation that would be easy to clone. Welcome to the Wonder Machine The reason I started this blog is to share a particular design of a demo environment, a special way to install software, that can address the above requirements, even for integrated setups. This design was created by a team at Oracle Utilities Global Business Unit, and we are using this setup for most of our demo environments. In a bout of modesty we called it the Wonder Machine. Over the next few posts – think of it as a novel in parts – I will tell you about the big idea, how it was implemented and what you can do with it. After we have laid down the groundwork, I would like to share some tips and tricks for users of our Wonder Machine implementation, as well as things I am learning about building portable, cloneable environments. The Wonder Machine is by no means a closed specification, it is under active development! I am hoping this blog will be of interest to two groups of readers – the users of the Wonder Machine we have built at Oracle Utilities, who want to get the most out of their demo environments and be able to reconfigure it to their needs – and to people who need to build environments for demonstration, testing, training, development and would like to make them cloneable and portable to maximize the reuse of their effort. Surely we are not the only ones facing this problem? If you can think of a better way to solve it, or if you can help us improve on our concept, I will appreciate your comments!

  Read the article

• On Reflector Pricing

  - by Nick Harrison

  I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

  Read the article

• JavaDay Taipei 2014 Trip Report

  - by reza_rahman

  JavaDay Taipei 2014 was held at the Taipei International Convention Center on August 1st. Organized by Oracle University, it is one of the largest Java developer events in Taiwan. This was another successful year for JavaDay Taipei with a fully sold out venue packed with youthful, energetic developers (this was my second time at the event and I have already been invited to speak again next year!). In addition to Oracle speakers like me, Steve Chin and Naveen Asrani, the event also featured a bevy of local speakers including Taipei Java community leaders. Topics included Java SE, Java EE, JavaFX, cloud and Big Data. It was my pleasure and privilege to present one of the opening keynotes for the event. I presented my session on Java EE titled "JavaEE.Next(): Java EE 7, 8, and Beyond". I covered the changes in Java EE 7 as well as what's coming in Java EE 8. I demoed the Cargo Tracker Java EE BluePrints. I also briefly talked about Adopt-a-JSR for Java EE 8. The slides for the keynote are below (click here to download and view the actual PDF): It appears your Web browser is not configured to display PDF files. No worries, just click here to download the PDF file. In the afternoon I did my JavaScript + Java EE 7 talk titled "Using JavaScript/HTML5 Rich Clients with Java EE 7". This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The talk was completely packed. The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. I am delivering this material at JavaOne 2014 as a two-hour tutorial. This should give me a little more bandwidth to dig a little deeper, especially on the JavaScript end. I finished off Java Day Taipei with my talk titled "Using NoSQL with ~JPA, EclipseLink and Java EE" (this was the last session of the conference). The talk covers an interesting gap that there is surprisingly little material on out there. The talk has three parts -- a birds-eye view of the NoSQL landscape, how to use NoSQL via a JPA centric facade using EclipseLink NoSQL, Hibernate OGM, DataNucleus, Kundera, Easy-Cassandra, etc and how to use NoSQL native APIs in Java EE via CDI. The slides for the talk are here: Using NoSQL with ~JPA, EclipseLink and Java EE from Reza Rahman The JPA based demo is available here, while the CDI based demo is available here. Both demos use MongoDB as the data store. Do let me know if you need help getting the demos up and running. After the event the Oracle University folks hosted a reception in the evening which was very well attended by organizers, speakers and local Java community leaders. I am extremely saddened by the fact that this otherwise excellent trip was scarred by terrible tragedy. After the conference I joined a few folks for a hike on the Maokong Mountain on Saturday. The group included friends in the Taiwanese Java community including Ian and Robbie Cheng. Without warning, fatal tragedy struck on a remote part of the trail. Despite best efforts by us, the excellent Taiwanese Emergency Rescue Team and World class Taiwanese physicians we were unable to save our friend Robbie Cheng's life. Robbie was just thirty-four years old and is survived by his younger brother, mother and father. Being the father of a young child myself, I can only imagine the deep sorrow that this senseless loss unleashes. Robbie was a key member of the Taiwanese Java community and a Java Evangelist at Sun at one point. Ironically the only picture I was able to take of the trail was mere moments before tragedy. I thought I should place him in that picture in profoundly respectful memoriam: Perhaps there is some solace in the fact that there is something inherently honorable in living a bright life, dying young and meeting one's end on a beautiful remote mountain trail few venture to behold let alone attempt to ascend in a long and tired lifetime. Perhaps I'd even say it's a fate I would not entirely regret facing if it were my own. With that thought in mind it seems appropriate to me to quote some lyrics from the song "Runes to My Memory" by legendary Swedish heavy metal band Amon Amarth idealizing a fallen Viking warrior cut down in his prime: "Here I lie on wet sand I will not make it home I clench my sword in my hand Say farewell to those I love When I am dead Lay me in a mound Place my weapons by my side For the journey to Hall up high When I am dead Lay me in a mound Raise a stone for all to see Runes carved to my memory" I submit my deepest condolences to Robbie's family and hope my next trip to Taiwan ends in a less somber note.

  Read the article

• JPRT: A Build & Test System

  - by kto

  DRAFT A while back I did a little blogging on a system called JPRT, the hardware used and a summary on my java.net weblog. This is an update on the JPRT system. JPRT ("JDK Putback Reliablity Testing", but ignore what the letters stand for, I change what they mean every day, just to annoy people :\^) is a build and test system for the JDK, or any source base that has been configured for JPRT. As I mentioned in the above blog, JPRT is a major modification to a system called PRT that the HotSpot VM development team has been using for many years, very successfully I might add. Keeping the source base always buildable and reliable is the first step in the 12 steps of dealing with your product quality... or was the 12 steps from Alcoholics Anonymous... oh well, anyway, it's the first of many steps. ;\^) Internally when we make changes to any part of the JDK, there are certain procedures we are required to perform prior to any putback or commit of the changes. The procedures often vary from team to team, depending on many factors, such as whether native code is changed, or if the change could impact other areas of the JDK. But a common requirement is a verification that the source base with the changes (and merged with the very latest source base) will build on many of not all 8 platforms, and a full 'from scratch' build, not an incremental build, which can hide full build problems. The testing needed varies, depending on what has been changed. Anyone that was worked on a project where multiple engineers or groups are submitting changes to a shared source base knows how disruptive a 'bad commit' can be on everyone. How many times have you heard: "So And So made a bunch of changes and now I can't build!". But multiply the number of platforms by 8, and make all the platforms old and antiquated OS versions with bizarre system setup requirements and you have a pretty complicated situation (see http://download.java.net/jdk6/docs/build/README-builds.html). We don't tolerate bad commits, but our enforcement is somewhat lacking, usually it's an 'after the fact' correction. Luckily the Source Code Management system we use (another antique called TeamWare) allows for a tree of repositories and 'bad commits' are usually isolated to a small team. Punishment to date has been pretty drastic, the Queen of Hearts in 'Alice in Wonderland' said 'Off With Their Heads', well trust me, you don't want to be the engineer doing a 'bad commit' to the JDK. With JPRT, hopefully this will become a thing of the past, not that we have had many 'bad commits' to the master source base, in general the teams doing the integrations know how important their jobs are and they rarely make 'bad commits'. So for these JDK integrators, maybe what JPRT does is keep them from chewing their finger nails at night. ;\^) Over the years each of the teams have accumulated sets of machines they use for building, or they use some of the shared machines available to all of us. But the hunt for build machines is just part of the job, or has been. And although the issues with consistency of the build machines hasn't been a horrible problem, often you never know if the Solaris build machine you are using has all the right patches, or if the Linux machine has the right service pack, or if the Windows machine has it's latest updates. Hopefully the JPRT system can solve this problem. When we ship the binary JDK bits, it is SO very important that the build machines are correct, and we know how difficult it is to get them setup. Sure, if you need to debug a JDK problem that only shows up on Windows XP or Solaris 9, you'll still need to hunt down a machine, but not as a regular everyday occurance. I'm a big fan of a regular nightly build and test system, constantly verifying that a source base builds and tests out. There are many examples of automated build/tests, some that trigger on any change to the source base, some that just run every night. Some provide a protection gateway to the 'golden' source base which only gets changes that the nightly process has verified are good. The JPRT (and PRT) system is meant to guard the source base before anything is sent to it, guarding all source bases from the evil developer, well maybe 'evil' isn't the right word, I haven't met many 'evil' developers, more like 'error prone' developers. ;\^) Humm, come to think about it, I may be one from time to time. :\^{ But the point is that by spreading the build up over a set of machines, and getting the turnaround down to under an hour, it becomes realistic to completely build on all platforms and test it, on every putback. We have the technology, we can build and rebuild and rebuild, and it will be better than it was before, ha ha... Anybody remember the Six Million Dollar Man? Man, I gotta get out more often.. Anyway, now the nightly build and test can become a 'fetch the latest JPRT build bits' and start extensive testing (the testing not done by JPRT, or the platforms not tested by JPRT). Is it Open Source? No, not yet. Would you like to be? Let me know. Or is it more important that you have the ability to use such a system for JDK changes? So enough blabbering on about this JPRT system, tell me what you think. And let me know if you want to hear more about it or not. Stay tuned for the next episode, same Bloody Bat time, same Bloody Bat channel. ;\^) -kto

  Read the article

• Documentation Changes in Solaris 11.1

  - by alanc

  One of the first places you can see Solaris 11.1 changes are in the docs, which have now been posted in the Solaris 11.1 Library on docs.oracle.com. I spent a good deal of time reviewing documentation for this release, and thought some would be interesting to blog about, but didn't review all the changes (not by a long shot), and am not going to cover all the changes here, so there's plenty left for you to discover on your own. Just comparing the Solaris 11.1 Library list of docs against the Solaris 11 list will show a lot of reorganization and refactoring of the doc set, especially in the system administration guides. Hopefully the new break down will make it easier to get straight to the sections you need when a task is at hand. Packaging System Unfortunately, the excellent in-depth guide for how to build packages for the new Image Packaging System (IPS) in Solaris 11 wasn't done in time to make the initial Solaris 11 doc set. An interim version was published shortly after release, in PDF form on the OTN IPS page. For Solaris 11.1 it was included in the doc set, as Packaging and Delivering Software With the Image Packaging System in Oracle Solaris 11.1, so should be easier to find, and easier to share links to specific pages the HTML version. Beyond just how to build a package, it includes details on how Solaris is packaged, and how package updates work, which may be useful to all system administrators who deal with Solaris 11 upgrades & installations. The Adding and Updating Oracle Solaris 11.1 Software Packages was also extended, including new sections on Relaxing Version Constraints Specified by Incorporations and Locking Packages to a Specified Version that may be of interest to those who want to keep the Solaris 11 versions of certain packages when they upgrade, such as the couple of packages that had functionality removed by an (unusual for an update release) End of Feature process in the 11.1 release. Also added in this release is a document containing the lists of all the packages in each of the major package groups in Solaris 11.1 (solaris-desktop, solaris-large-server, and solaris-small-server). While you can simply get the contents of those groups from the package repository, either via the web interface or the pkg command line, the documentation puts them in handy tables for easier side-by-side comparison, or viewing the lists before you've installed the system to pick which one you want to initially install. X Window System We've not had good X11 coverage in the online Solaris docs in a while, mostly relying on the man pages, and upstream X.Org docs. In this release, we've integrated some X coverage into the Solaris 11.1 Desktop Adminstrator's Guide, including sections on installing fonts for fontconfig or legacy X11 clients, X server configuration, and setting up remote access via X11 or VNC. Of course we continue to work on improving the docs, including a lot of contributions to the upstream docs all OS'es share (more about that another time). Security One of the things Oracle likes to do for its products is to publish security guides for administrators & developers to know how to build systems that meet their security needs. For Solaris, we started this with Solaris 11, providing a guide for sysadmins to find where the security relevant configuration options were documented. The Solaris 11.1 Security Guidelines extend this to cover new security features, such as Address Space Layout Randomization (ASLR) and Read-Only Zones, as well as adding additional guidelines for existing features, such as how to limit the size of tmpfs filesystems, to avoid users driving the system into swap thrashing situations. For developers, the corresponding document is the Developer's Guide to Oracle Solaris 11 Security, which has been the source for years for documentation of security-relevant Solaris API's such as PAM, GSS-API, and the Solaris Cryptographic Framework. For Solaris 11.1, a new appendix was added to start providing Secure Coding Guidelines for Developers, leveraging the CERT Secure Coding Standards and OWASP guidelines to provide the base recommendations for common programming languages and their standard API's. Solaris specific secure programming guidance was added via links to other documentation in the product doc set. In parallel, we updated the Solaris C Libary Functions security considerations list with details of Solaris 11 enhancements such as FD_CLOEXEC flags, additional *at() functions, and new stdio functions such as asprintf() and getline(). A number of code examples throughout the Solaris 11.1 doc set were updated to follow these recommendations, changing unbounded strcpy() calls to strlcpy(), sprintf() to snprintf(), etc. so that developers following our examples start out with safer code. The Writing Device Drivers guide even had the appendix updated to list which of these utility functions, like snprintf() and strlcpy(), are now available via the Kernel DDI. Little Things Of course all the big new features got documented, and some major efforts were put into refactoring and renovation, but there were also a lot of smaller things that got fixed as well in the nearly a year between the Solaris 11 and 11.1 doc releases - again too many to list here, but a random sampling of the ones I know about & found interesting or useful: The Privileges section of the DTrace Guide now gives users a pointer to find out how to set up DTrace privileges for non-global zones and what limitations are in place there. A new section on Recommended iSCSI Configuration Practices was added to the iSCSI configuration section when it moved into the SAN Configuration and Multipathing administration guide. The Managing System Power Services section contains an expanded explanation of the various tunables for power management in Solaris 11.1. The sample dcmd sources in /usr/demo/mdb were updated to include ::help output, so that developers like myself who follow the examples don't forget to include it (until a helpful code reviewer pointed it out while reviewing the mdb module changes for Xorg 1.12). The README file in that directory was updated to show the correct paths for installing both kernel & userspace modules, including the 64-bit variants.

  Read the article

• Managing text-maps in a 2D array on to be painted on HTML5 Canvas

  - by weka

  So, I'm making a HTML5 RPG just for fun. The map is a <canvas> (512px width, 352px height | 16 tiles across, 11 tiles top to bottom). I want to know if there's a more efficient way to paint the <canvas>. Here's how I have it right now. How tiles are loaded and painted on map The map is being painted by tiles (32x32) using the Image() piece. The image files are loaded through a simple for loop and put into an array called tiles[] to be PAINTED on using drawImage(). First, we load the tiles... and here's how it's being done: // SET UP THE & DRAW THE MAP TILES tiles = []; var loadedImagesCount = 0; for (x = 0; x <= NUM_OF_TILES; x++) { var imageObj = new Image(); // new instance for each image imageObj.src = "js/tiles/t" + x + ".png"; imageObj.onload = function () { console.log("Added tile ... " + loadedImagesCount); loadedImagesCount++; if (loadedImagesCount == NUM_OF_TILES) { // Onces all tiles are loaded ... // We paint the map for (y = 0; y <= 15; y++) { for (x = 0; x <= 10; x++) { theX = x * 32; theY = y * 32; context.drawImage(tiles[5], theY, theX, 32, 32); } } } }; tiles.push(imageObj); } Naturally, when a player starts a game it loads the map they last left off. But for here, it an all-grass map. Right now, the maps use 2D arrays. Here's an example map. [[4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 1, 1, 1, 1], [1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 11, 11, 11, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 1, 1, 1, 1, 1, 1, 1, 13, 13, 13, 13, 13, 1], [1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1, 1, 1]]; I get different maps using a simple if structure. Once the 2d array above is return, the corresponding number in each array will be painted according to Image() stored inside tile[]. Then drawImage() will occur and paint according to the x and y and times it by 32 to paint on the correct x-y coordinate. How multiple map switching occurs With my game, maps have five things to keep track of: currentID, leftID, rightID, upID, and bottomID. currentID: The current ID of the map you are on. leftID: What ID of currentID to load when you exit on the left of current map. rightID: What ID of currentID to load when you exit on the right of current map. downID: What ID of currentID to load when you exit on the bottom of current map. upID: What ID of currentID to load when you exit on the top of current map. Something to note: If either leftID, rightID, upID, or bottomID are NOT specific, that means they are a 0. That means they cannot leave that side of the map. It is merely an invisible blockade. So, once a person exits a side of the map, depending on where they exited... for example if they exited on the bottom, bottomID will the number of the map to load and thus be painted on the map. Here's a representational .GIF to help you better visualize: As you can see, sooner or later, with many maps I will be dealing with many IDs. And that can possibly get a little confusing and hectic. The obvious pros is that it load 176 tiles at a time, refresh a small 512x352 canvas, and handles one map at time. The con is that the MAP ids, when dealing with many maps, may get confusing at times. My question Is this an efficient way to store maps (given the usage of tiles), or is there a better way to handle maps? I was thinking along the lines of a giant map. The map-size is big and it's all one 2D array. The viewport, however, is still 512x352 pixels. Here's another .gif I made (for this question) to help visualize: Sorry if you cannot understand my English. Please ask anything you have trouble understanding. Hopefully, I made it clear. Thanks.

  Read the article

• Building Enterprise Smartphone App &ndash; Part 2: Platforms and Features

  - by Tim Murphy

  This is part 2 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. In the previous post I discussed what reasons a company might have for creating a smartphone application.  In this installment I will cover some of history and state of the different platforms as well as features that can be leveraged for building enterprise smartphone applications. Platforms Before you start choosing a platform to develop your solutions on it is good to understand how we got here and what features you can leverage. History To my memory we owe all of this to a product called the Apple Newton that came out in 1987. It was the first PDA and back then I was much more of an Apple fan.  I was very impressed with this device even though it never really went anywhere.  The Palm Pilot by US Robotics was the next major advancement in PDA. It had a simple short hand window that allowed for quick stylus entry.. Later, Windows CE came out and started the broadening of the PDA market. After that it was the Palm and CE operating systems that started showing up on cell phones and for some time these were the two dominant operating systems that were distributed with devices from multiple hardware vendors. Current The iPhone was the first smartphone to take away the stylus and give us a multi-touch interface.  It was a revolution in usability and really changed the attractiveness of smartphones for the general public.  This brought us to the beginning of the current state of the market with the concept of an online store that makes it easy for customers to get new features and functionality on demand. With Android, Google made this more than a one horse race.  Not only did they come to compete, their low cost actually made them the leading OS.  Of course what made Android so attractive also is its major fault.  It is so open that it has been a target for malware which leaves consumers exposed.  Fortunately for Google though, most consumers aren’t aware of the threat that they are under. Although Microsoft had put out one of the first smart phone operating systems with CE it had to play catch up and finally came out with the Windows Phone.  They have gone for a market approach between those of iOS and Android.  They support multiple hardware vendors like Google, but they kept a certification process for applications that is similar to Apple.  They also created a user interface that was different enough to give it a clear separation from the other two platforms. The result of all this is hundreds of millions of smartphones being sold monthly across all three platforms giving us a wide range of choices and challenges when it comes to developing solutions. Features So what are the features that make these devices flexible enough be considered for use in the enterprise? The biggest advantage of today's devices is network connectivity.  The ability to access information from multiple sources at a moment’s notice is critical for businesses.  Add to that the ability to communicate over a variety of text, voice and video modes and we have a powerful starting point. Every smartphone has a cameras and they are not just useful for posting to Instagram. We are seeing more applications such as Bing vision that allow us to scan just about any printed code or text to find information.  These capabilities have been made available to developers in the form of standard libraries for reading barcodes of just about an flavor and optical character recognition (OCR) interpretation. Bluetooth give us the ability to communicate with multiple devices. Whether these are headsets, keyboard or printers the wireless communication capabilities are just starting to evolve.  The more these wireless communication protocols grow, the more opportunities we will see to transfer data between users and a variety of devices. Local storage of information that can be called up even when the device cannot reach the network is the other big capability.  This give users the ability to work offline as well and transmit information when connections are restored. These are the tools that we have to work with to build applications that can be leveraged to gain a competitive advantage for companies that implement them. Coming Up In the third installment I will cover key concerns that you face when building enterprise smartphone apps. del.icio.us Tags: smartphones,enterprise smartphone Apps,architecture,iOS,Android,Windows Phone

  Read the article

• Is your dream an international experience?

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Studying in Poland, having two summer jobs in England, doing one internship in India, working in Thailand for half a year and now working in Prague. Does it seem an adventure? Well it is and I will tell you how I came to have this international experience. Dzien Dobry! My name is Wojciech Jurojc, I am Polish and I am currently a Business Development Consultant within Oracle, based in Prague. I joined Oracle on the 1st of August 2011. I graduated in 2010 and obtained 2 Masters Degrees in Political Science and Economics. I would like to tell you more about my past and how I joined Oracle. In 2005 I began studying at the Faculty of Political Sciences Gdansk University. In 2008, I obtained a Bachelors Degree. During these three years I had the opportunity to go to England twice, where I worked as a Bartender, first in Blackpool and then in Manchester. This allowed me to improve my language skills and become more confident. In the meantime, I joined the International Student Organization-AIESEC, where I was organized conferences and conducted student projects. Also I met a mass of interesting people from around the world. After graduation in 2008, I was able to get an Internship within a big company in Poland. I worked there as an Intern in the Purchase Department. That was my first adventure within a corporate environment. I learnt a lot about purchasing processes and negotiations. In September 2008, I started studying two Masters Faculties: Political Science and Economics. It was very difficult, but it was not impossible. Over the next two years of studying I was able to go on a three month internship to India where I worked as a Marketing Assistant in an NGO. I was travelling around northern India and did presentations to the academic community about green energy and environmental projects. I had the opportunity to visit Nepal and walked in the Himalayas. That was a huge experience as well as a cultural shock. It taught me how to deal with many problems and to appreciate what I have. At the end of 2009 I was working as a Marketing Assistant for a Leasing company, where I learnt useful sales knowledge and improved my objection handling skills. In July 2010, I graduated with a double Masters and found a job in Thailand as Sales Representative in an IT company. I worked in Thailand until the end of January 2011. Besides that, I was working in an International company with interesting people and I had the opportunity to travel around Thailand and visit Cambodia. After this adventure I started looking for jobs in Europe where I could further develop my sales skills. I found Oracle and I don’t regret this decision which I made. I am currently working in Prague in an international Hardware team and I know that is not the end of my adventures. At this moment, I am working in a team of 12 members. Ten of them are based in Prague and 2 others are based in Russia. We come from different countries such as: Czech Republic, Russia, Ukraine, Turkey, Slovakia and Kazakhstan. I am working on the Polish market, cooperating with our Hardware customers and partners. What do I enjoy the most about my job? I enjoy every challenge that I face in my daily activities as there are always new experiences for me and new things that I learn. As part of Oracle, I gain international exposure and therefore more career opportunities to explore. I have planned my next step for the career path I dream of and I am currently working on it. I recommend you check our Career Page if you’re looking for an international career. If you want to find out more about our job opportunities, follow us on https://campus.oracle.com .

  Read the article

• Synergy - easy share of keyboard and mouse between multiple computers

  Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

  Read the article

• Vendors: Partners or Salespeople?

  - by BuckWoody

  I got a great e-mail from a friend that asked about how he could foster a better relationship with his vendors. So many times when you work with a vendor it’s more of a used-car sales experience than a partnership – but you can actually make your vendor more of a partner, as long as you both set some ground-rules at the start. Sit down with your vendor, and have a heart-to-heart talk with them, explain that they won’t win every time, but that you’re willing to work with them in an honest way on both sides. Here’s the advice I sent him verbatim. I hope this post generates lots of comments from both customers and vendors. I don’t expect that you’ve had a great experience with your Microsoft reps, but I happen to work with some of the best sales teams in the business, and our clients tell us that all the time. “The key to this relationship is to keep the audience really small. Ideally there should be one person from your side that is responsible for the relationship, and one from the vendor’s side. Each responsible person should have the authority to make decisions, and to bring in other folks as needed for a given topic, project or decision.   For Microsoft, this is called an “Account Manager” – they aren’t technical, they aren’t sales. They “own” a relationship with a company. They learn what the company does, who does it, and how. They are responsible to understand what the challenges in your company are. While they don’t know the bits and bytes of everything we sell, they know what each thing does, and who to talk to about it. I get a call from an Account Manager every week that has pre-digested an issue at an organization and says to me: “I need you to set up an architectural meeting with their technical staff to get a better read on how we can help with problem X.” I do that and then report back to the Account Manager what we learned.  All through this process there’s the atmosphere of a “team”, not a “sales opportunity” per se. I’ve even recommended that the firm use a rival product, and I’ve never gotten push-back on that decision from my Account Managers.   But that brings up an interesting point. Someone pays an Account Manager and pays me. They expect something in return. At some point, you have to buy something. Not every time, not every situation – sometimes it’s just helping you with what you already bought from us. But the point is that you can’t expect lots of love and never spend any money. That’s the way business works.   Finally, don’t view the vendor as someone with their hand in your pocket – somebody that’s just trying to sell you something and doesn’t care if they ever see you again – unless they deserve it. There are plenty of “love them and leave them” companies out there, and you may have even had this experience with us, but that isn’t the case in the firms I work with. In fact, my customers get a questionnaire that asks them that exact question. “How many times have you seen your account team? Did you like your interaction with them? Can they do better?” My raises, performance reviews and general standing in my group are based on the answers the company gives.  Ask your vendor if they measure their sales and support teams this way – if not, seek another vendor to partner with.   Partnering with someone is a big deal. It involves time and effort on your part, and on the vendor’s part. If either of you isn’t pulling your weight, it just won’t work. You have every right to expect them to treat you as a partner, and they have the same right for your side.” Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Data Source Security Part 5

  - by Steve Felts

  If you read through the first four parts of this series on data source security, you should be an expert on this focus area.  There is one more small topic to cover related to WebLogic Resource permissions.  After that comes the test, I mean example, to see with a real set of configuration parameters what the results are with some concrete values. WebLogic Resource Permissions All of the discussion so far has been about database credentials that are (eventually) used on the database side.  WLS has resource credentials to control what WLS users are allowed to access JDBC resources.  These can be defined on the Policies tab on the Security tab associated with the data source.  There are four permissions: “reserve” (get a new connection), “admin”, “shrink”, and reset (plus the all-inclusive “ALL”); we will focus on “reserve” here because we are talking about getting connections.  By default, JDBC resource permissions are completely open – anyone can do anything.  As soon as you add one policy for a permission, then all other users are restricted.  For example, if I add a policy so that “weblogic” can reserve a connection, then all other users will fail to reserve connections unless they are also explicitly added.  The validation is done for WLS user credentials only, not database user credentials.  Configuration of resources in general is described at “Create policies for resource instances” http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/security/CreatePoliciesForResourceInstances.html.  This feature can be very useful to restrict what code and users can get to your database. There are the three use cases: API Use database credentials User for permission checking getConnection() True or false Current WLS user getConnection(user,password) False User/password from API getConnection(user,password) True Current WLS user If a simple getConnection() is used or database credentials are enabled, the current user that is authenticated to the WLS system is checked. If database credentials are not enabled, then the user and password on the API are used. Example The following is an actual example of the interactions between identity-based-connection-pooling-enabled, oracle-proxy-session, and use-database-credentials. On the database side, the following objects are configured.- Database users scott; jdbcqa; jdbcqa3- Permission for proxy: alter user jdbcqa3 grant connect through jdbcqa;- Permission for proxy: alter user jdbcqa grant connect through jdbcqa; The following WebLogic Data Source objects are configured.- Users weblogic, wluser- Credential mapping “weblogic” to “scott”- Credential mapping "wluser" to "jdbcqa3"- Data source descriptor configured with user “jdbcqa”- All tests are run with Set Client ID set to true (more about that below).- All tests are run with oracle-proxy-session set to false (more about that below). The test program:- Runs in servlet- Authenticates to WLS as user “weblogic” Use DB Credentials Identity based getConnection(scott,***) getConnection(weblogic,***) getConnection(jdbcqa3,***) getConnection()  true  true Identity scottClient weblogicProxy null weblogic fails - not a db user User jdbcqa3Client weblogicProxy null Default user jdbcqaClient weblogicProxy null  false  true scott fails - not a WLS user User scottClient scottProxy null jdbcqa3 fails - not a WLS user User scottClient scottProxy null  true  false Proxy for scott fails weblogic fails - not a db user User jdbcqa3Client weblogicProxy jdbcqa Default user jdbcqaClient weblogicProxy null  false  false scott fails - not a WLS user Default user jdbcqaClient scottProxy null jdbcqa3 fails - not a WLS user Default user jdbcqaClient scottProxy null If Set Client ID is set to false, all cases would have Client set to null. If this was not an Oracle thin driver, the one case with the non-null Proxy in the above table would throw an exception because proxy session is only supported, implicitly or explicitly, with the Oracle thin driver. When oracle-proxy-session is set to true, the only cases that will pass (with a proxy of "jdbcqa") are the following.1. Setting use-database-credentials to true and doing getConnection(jdbcqa3,…) or getConnection().2. Setting use-database-credentials to false and doing getConnection(wluser, …) or getConnection(). Summary There are many options to choose from for data source security.  Considerations include the number and volatility of WLS and Database users, the granularity of data access, the depth of the security identity (property on the connection or a real user), performance, coordination of various components in the software stack, and driver capabilities.  Now that you have the big picture (remember that table in part 1), you can make a more informed choice.

  Read the article

• WMemoryProfiler is Released

  - by Alois Kraus

  What is it? WMemoryProfiler is a managed profiling Api to aid integration testing. This free library can get managed heap statistics and memory usage for your own process (remember testing) and other processes as well. The best thing is that it does work from .NET 2.0 up to .NET 4.5 in x86 and x64. To make it more interesting it can attach to any running .NET process. The reason why I do mention this is that commercial profilers do support this functionality only for their professional editions. An normally only since .NET 4.0 since the profiling API only since then does support attaching to a running process. This thing does differ in many aspects from “normal” profilers because while profiling yourself you can get all objects from all managed heaps back as an object array. If you ever wanted to change the state of an object which does only exist a method local in another thread you can get your hands on it now … Enough theory. Show me some code /// <summary> /// Show feature to not only get statisics out of a process but also the newly allocated /// instances since the last call to MarkCurrentObjects. /// GetNewObjects does return the newly allocated objects as object array /// </summary> static void InstanceTracking() { using (var dumper = new MemoryDumper()) // if you have problems use to see the debugger windows true,true)) { dumper.MarkCurrentObjects(); Allocate(); ILookup<Type, object> newObjects = dumper.GetNewObjects() .ToLookup( x => x.GetType() ); Console.WriteLine("New Strings:"); foreach (var newStr in newObjects[typeof(string)] ) { Console.WriteLine("Str: {0}", newStr); } } } … New Strings: Str: qqd Str: String data: Str: String data: 0 Str: String data: 1 … This is really hot stuff. Not only you can get heap statistics but you can directly examine the new objects and make queries upon them. When I do find more time I can reconstruct the object root graph from it from my own process. It this cool or what? You can also peek into the Finalization Queue to check if you did accidentally forget to dispose a whole bunch of objects … /// <summary> /// .NET 4.0 or above only. Get all finalizable objects which are ready for finalization and have no other object roots anymore. /// </summary> static void NotYetFinalizedObjects() { using (var dumper = new MemoryDumper()) { object[] finalizable = dumper.GetObjectsReadyForFinalization(); Console.WriteLine("Currently {0} objects of types {1} are ready for finalization. Consider disposing them before.", finalizable.Length, String.Join(",", finalizable.ToLookup( x=> x.GetType() ) .Select( x=> x.Key.Name)) ); } } How does it work? The W of WMemoryProfiler is a good hint. It does employ Windbg and SOS dll to do the heavy lifting and concentrates on an easy to use Api which does hide completely Windbg. If you do not want to see Windbg you will never see it. In my experience the most complex thing is actually to download Windbg from the Windows 8 Stanalone SDK. This is described in the Readme and the exception you are greeted with if it is missing in much greater detail. So I will not go into this here.   What Next? Depending on the feedback I do get I can imagine some features which might be useful as well Calculate first order GC Roots from the actual object graph Identify global statics in Types in object graph Support read out of finalization queue of .NET 2.0 as well. Support Memory Dump analysis (again a feature only supported by commercial profilers in their professional editions if it is supported at all) Deserialize objects from a memory dump into a live process back (this would need some more investigation but it is doable) The last item needs some explanation. Why on earth would you want to do that? The basic idea is to store in your live process some logging/tracing data which can become quite big but since it is never written to it is very fast to generate. When your process crashes with a memory dump you could transfer this data structure back into a live viewer which can then nicely display your program state at the point it did crash. This is an advanced trouble shooting technique I have not seen anywhere yet but it could be quite useful. You can have here a look at the current feature list of WMemoryProfiler with some examples.   How To Get Started? First I would download the released source package (it is tiny). And compile the complete project. Then you can compile the Example project (it has this name) and uncomment in the main method the scenario you want to check out. If you are greeted with an exception it is time to install the Windows 8 Standalone SDK which is described in great detail in the exception text. Thats it for the first round. I have seen something more limited in the Java world some years ago (now I cannot find the link anymore) but anyway. Now we have something much better.

  Read the article

• Lessons learnt in implementing Scrum in a Large Organization that has traditional values

  - by MarkPearl

  I recently had the experience of being involved in a “test” scrum implementation in a large organization that was used to a traditional project management approach. Here are some lessons that I learnt from it. Don’t let the Project Manager be the Product Owner First lesson learnt is to identify the correct product owner – in this instance the product manager assumed the role of the product owner which was a mistake. The product owner is the one who has the most to loose if the project fails. With a methodology that advocates removing the role of the project manager from the process then it is not in the interests of the person who is employed as a project manager to be the product owner – in fact they have the most to gain should the project fail. Know the time commitments of team members to the Project Second lesson learnt is to get a firm time commitment of the members on a team for the sprint and to hold them to it. In this project instance many of the issues we faced were with team members having to double up on supporting existing projects/systems and the scrum project. In many situations they just didn’t get round to doing any work on the scrum project for several days while they tried to meet other commitments. Initially this was not made transparent to the team – in stand up team members would say that had done some work but would be very vague on how much time they had actually spent using the blackhole of their other legacy projects as an excuse – putting up a time burn down chart made time allocations transparent and easy to hold the team to. In addition, how can you plan for a sprint without knowing the actual time available of the members – when I mean actual time, the exercise of getting them to go through all their appointments and lunch times and breaks and removing them from their time commitment helps get you to a realistic time that they can dedicate. Make sure you meet your minimum team sizes In a recent post I wrote about the difference between a partnership and a team. If you are going to do scrum in a large organization make sure you have a minimum team size of at least 3 developers. My experience with larger organizations is that people have a tendency to be sick more, take more leave and generally not be around – if you have a team size of two it is so easy to loose momentum on the project – the more people you have in the team (up to about 9) the more the momentum the project will have when people are not around. Swapping from one methodology to another can seem as waste to the customer It sounds bad, but most customers don’t care what methodology you use. Often they have bought into the “big plan upfront”. If you can, avoid taking a project on midstream from a traditional approach unless the customer has not bought into the process – with this particular project they had a detailed upfront planning breakaway with the customer using the traditional approach and then before the project started we moved onto a scrum implementation – this seemed as waste to the customer. We should have managed the customers expectation properly. Don’t play the role of the scrum master if you can’t be the scrum master With this particular implementation I was the “scrum master”. But all I did was go through the process of the formal meetings of scrum – I attended stand up, retrospectives and planning – but I was not hands on the ground. I was not performing the most important role of removing blockages – and by the end of the project there were a number of blockages “cropping up”. What could have been a better approach was to take someone on the team and train them to be the scrum master and be present to coach them. Alternatively actually be on the team on a fulltime basis and be the scrum master. By just going through the meetings of scrum didn’t mean we were doing scrum. So we failed with this one, if you fail look at it from an agile perspective As this particular project drew to a close and it became more and more apparent that it was not going to succeed the failure of it became depressing. Emotions were expressed by various people on the team that we not encouraging and enforced the failure. Embracing the failure and looking at it for what it is instead of taking it as the end of the world can change how you grow from the experience. Acknowledging that it failed and then focussing on learning from why and how to avoid the failure in the future can change how you feel emotionally about the team, the project and the organization.

  Read the article

• Social Engagement: One Size Doesn't Fit Anyone

  - by Mike Stiles

  The key to achieving meaningful social engagement is to know who you’re talking to, know what they like, and consistently deliver that kind of material to them. Every magazine for women knows this. When you read the article titles promoted on their covers, there’s no mistaking for whom that magazine is intended. And yet, confusion still reigns at many brands as to exactly whom they want to talk to, what those people want to hear, and what kind of content they should be creating for them. In most instances, the root problem is brands want to be all things to all people. Their target audience…the world! Good luck with that. It’s 2012, the age of aggregation and custom content delivery. To cope with the modern day barrage of information, people have constructed technological filters so that content they regard as being “for them” is mostly what gets through. Even if your brand is for men and women, young and old, you may want to consider social properties that divide men from women, and young from old. Yes, a man might find something in a women’s magazine that interests him. But that doesn’t mean he’s going to subscribe to it, or buy even one issue. In fact he’ll probably never see the article he’d otherwise be interested in, because in his mind, “This isn’t for me.” It wasn’t packaged for him. News Flash: men and women are different. So it’s a tall order to craft your Facebook Page or Twitter handle to simultaneously exude the motivators for both. The Harris Interactive study “2012 Connecting and Communicating Online: State of Social Media” sheds light on the differing social behaviors and drivers. -65% of women (vs. 59% of men) stay glued to social because they don’t want to miss anything. -25% of women check social when they wake up, before they check email. Only 18% of men check social before e-mail. -95% of women surveyed belong to Facebook vs. 86% of men. -67% of women log in to Facebook once a day or more vs. 54% of men. -Conventional wisdom is Pinterest is mostly a woman-thing, right? That may be true for viewing, but not true for sharing. Men are actually more likely to share on Pinterest than women, 23% to 10%. -The sharing divide extends to YouTube. 68% of women use it mainly for consumption, as opposed to 52% of men. -Women are as likely to have a Twitter account as men, but they’re much less likely to check it often. 54% of women check it once a week compared to 2/3 of men. Obviously, there are some takeaways from this depending on your target. Women don’t want to miss out on anything, so serialized content might be a good idea, right? Promotional posts that lead to a big payoff could keep them hooked. Posts for women might be better served first thing in the morning. If sharing is your goal, maybe male-targeted content is more likely to get those desired shares. And maybe Twitter is a better place to aim your male-targeted content than Facebook. Some grocery stores started experimenting with male-only aisles. The results have been impressive. Why? Because while it’s true men were finding those same items in the store just fine before, now something has been created just for them. They have a place in the store where they belong. Each brand’s strategy and targets are going to differ. The point is…know who you’re talking to, know how they behave, know what they like, and deliver content using any number of social relationship management targeting tools that meets their expectations. If, however, you’re committed to a one-size-fits-all, “our content is for everybody” strategy (or even worse, a “this is what we want to put out and we expect everybody to love it” strategy), your content will miss the mark for more often than it hits. @mikestilesPhoto via stock.schng

  Read the article

• Why Executives Need Enterprise Project Portfolio Management: 3 Key Considerations to Drive Value Across the Organization

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} By: Guy Barlow, Oracle Primavera Industry Strategy Director Over the last few years there has been a tremendous shift – some would say tectonic in nature – that has brought project management to the forefront of executive attention. Many factors have been driving this growing awareness, most notably, the global financial crisis, heightened regulatory environments and a need to more effectively operationalize corporate strategy. Executives in India are no exception. In fact, given the phenomenal rate of progress of the country, top of mind for all executives (whether in finance, operations, IT, etc.) is the need to build capacity, ramp-up production and ensure that the right resources are in place to capture growth opportunities. This applies across all industries from asset-intensive – like oil & gas, utilities and mining – to traditional manufacturing and the public sector, including services-based sectors such as the financial, telecom and life sciences segments are also part of the mix. However, compounding matters is a complex, interplay between projects – big and small, complex and simple – as companies expand and grow both domestically and internationally. So, having a standardized, enterprise wide solution for project portfolio management is natural. Failing to do so is akin to having two ERP systems, one to manage “large” invoices and one to manage “small” invoices. It makes no sense and provides no enterprise wide visibility. Therefore, it is imperative for executives to understand the full range of their business commitments, the benefit to the company, current performance and associated course corrections if needed. Irrespective of industry and regardless of the use case (e.g., building a power plant, launching a new financial service or developing a new automobile) company leaders need to approach the value of enterprise project portfolio management via 3 critical areas: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} 1. Greater Financial Discipline – Improve financial rigor and results through better governance and control is an imperative given today’s financial uncertainty and greater investment scrutiny. For example, as India plans a US$1 trillion investment in the country’s infrastructure how do companies ensure costs are managed? How do you control cash flow? Can you easily report this to stakeholders? 2. Improved Operational Excellence – Increase efficiency and reduce costs through robust collaboration and integration. Upwards of 66% of cost variances are driven by poor supplier collaboration. As you execute initiatives do you have visibility into the performance of your supply base? How are they integrated into the broader program plan? 3. Enhanced Risk Mitigation – Manage and react to uncertainty through improved transparency and contingency planning. What happens if you’re faced with a skills shortage? How do you plan and account for geo-political or weather related events? In summary, projects are not just the delivery of a product or service to a customer inside a predetermined schedule; they often form a contractual and even moral obligation to shareholders and stakeholders alike. Hence the intimate connection between executives and projects, with the latter providing executives with the platform to demonstrate that their organization has the capabilities and competencies needed to meet and, whenever possible, exceed their customer commitments. Effectively developing and operationalizing corporate strategy is the hallmark of successful executives and enterprise project and portfolio management allows them to achieve this goal. Article was first published for Manage India, an e-newsletter, PMI India.

  Read the article

• Speakers, Please Check Your Time

  - by AjarnMark

  Woodrow Wilson was once asked how long it would take him to prepare for a 10 minute speech. He replied "Two weeks". He was then asked how long it would take for a 1 hour speech. "One week", he replied. 2 hour speech? "I'm ready right now," he replied.  Whether that is a true story or an urban legend, I don’t really know, but either way, it is a poignant reminder for all speakers, and particularly apropos this week leading up to the PASS Community Summit. (Cross-posted to the PASS Professional Development Virtual Chapter blog #PASSProfDev.) What’s the point of that story?  Simply this…if you have plenty of time to do your presentation, you don’t need to prepare much because it is easy to throw in more and more material to stretch out to your allotted time.  But if you are on a tight time constraint, then it will take significant preparation to distill your talk down to only the essential points. I have attended seven of the last eight North American Summit events, and every one of them has been fantastic.  The speakers are great, the material is timely and relevant, and the networking opportunities are awesome.  And every year, there is one little thing that just bugs me…speakers going over their allotted time.  Why does it bother me so?  Well, if you look at a typical schedule for a Summit, you’ll see that there are six or more sessions going on at the same time, and only 15 minutes to move from one to another.  If you’re trying to maximize your training dollar by attending something during every session time slot, and you don’t want to be the last guy trying to squeeze into the middle of the row, then those 15 minutes can be critical.  All the more so if you need to stop and use the bathroom or if you have to hike to the opposite end of the convention center.  It is really a bad position to find yourself having to choose between learning the last key points of Speaker A who is going over time, and getting over to Speaker B on time so you don’t miss her key opening remarks. And frankly, I think it is just rude.  Yes, the speakers are the function, after all they are bringing the content that the rest of us are paying to learn.  But it is also an honor to be given the opportunity to speak at a conference like this, and no one speaker is so important that the conference would be a disaster without him.  Speakers know when they submit their abstract, long before the conference, how much time they will have.  It has been the same pattern at the Summit for at least the last eight years.  Program Sessions are 75 minutes long.  Some speakers who have a good track record, and meet other qualifying criteria, are extended an invitation to present a Spotlight Session which is 90 minutes (a 20% increase).  So there really is no excuse.  It’s not like you were promised a 2-hour segment and then discovered when you got here that it was only 75 minutes.  In fact, it’s not like PASS advertised 90-minute sessions for everyone and then a select few were cut back to only 75.  As a speaker, you know well before you get here which type of session you are doing and how long it is, so as a professional, you should plan accordingly. Now you might think that this only happens to rookies, but I’ll tell you that some of the worst offenders are big-name veterans who draw huge attendance numbers for their sessions.  Some attendees blow this off as, “Hey, it’s so-and-so, and I’d stay here for hours and listen to him/her talk.”  To which I would reply, “Then they should have submitted for a pre- or post-conference day-long seminar instead, but don’t try to squeeze your day-long talk into a 90-minute session.”  Now I don’t really believe that these speakers are being malicious or just selfishly trying to extend their time in the spotlight.  I think that most of them are merely being undisciplined and did not trim their presentation sufficiently, or allowed themselves to get off-track (often in a generous attempt to help someone in the audience with a question or problem that really should have been noted for further discussion after the session). So here is my recommendation…my plea, even.  TRIM THE FAT!  Now.  Before it’s too late.  Before you even get on the airplane, take a long, hard look at your presentation and eliminate some of the points that you originally thought you had to make, but in reality are not truly crucial to your main topic.  Delete a few slides.  Test your demos and have them already scripted rather than typing them during your talk.  It is better to cut out too much and end up with plenty of time at the end for Questions & Answers.  And you can always keep some notes on the stuff that you cut out so that you could fill it back in at the end as bonus material if you really do end up with a whole bunch of time on your hands.  But I don’t think you will.  And if you do, that will look even better to the audience as it will look like you’re giving them something extra that not every audience gets.  And they will thank you for that.

  Read the article

• Extending Expression Blend 4 &amp; Blend for Visual Studio 2012

  - by Chris Skardon

  Just getting this off the bat, I presume this will also work for Blend 5, but I can’t confirm it… Anyhews, I imagine you’re here because you want to know how to create an addin for Blend, so let’s jump right in there! First, and foremost, we’re going to need to ensure our development environment has the right setup, so the checklist: Visual Studio 2012 Blend for Visual Studio 2012 OK, let’s create a new project (class library, .NET 4.5): Hello.Extension The ‘.Extension’ bit is very very important. The addin will not work unless it is named in this way. You can put whatever you want at the front, but it has to have the extension bit. OK, so now we have a solution with one project. To this project we need to add references to the following things: Microsoft.Expression.Extensibility (from c:\program files\Microsoft Visual Studio 11.0\Blend\   -- x86 folder if you are on an x64 windows install) Microsoft.Expression.Framework (same location as above) PresentationCore PresentationFramework WindowsBase System.ComponentModel.Composition Got them? ACE. Let’s now add a project to contain our control, so, create a new WPF Application project, cunningly named something like ‘Hello.Control’… (I’m creating a WPF application here, because I’m too lazy to dig up the correct references, and this will add all the ones I need ) Once that is created, delete the App.xaml and MainWindow.xaml files, we won’t be needing them. You will also need to change the properties of the project itself, so it is only a class library. Once that is done, let’s add a new UserControl, which will be this: <UserControl x:Class="Hello.Control.HelloControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300"> <Grid> <TextBlock Text="HELLO!!!"/> </Grid> </UserControl> Impressive eh? Now, let’s reference the WPF project from the Extension library. All that’s left now is to code up our extension… So, add a class to the Extension project (name wise doesn’t matter), and make it implement the IPackage interface from the Microsoft.Expression.Extensibility library: public class HelloExtension : IPackage { /**/ } We’ll implement the two methods we need to: public class HelloExtension : IPackage { public void Load(IServices services) { } public void Unload() { } } We’re only really concerned about the Load method in this case, as let’s face it, the extension we have doesn’t need to do a lot to bog off. The interesting thing about the Load method is that it receives an IServices instance. This allows us to get access to all the services that Expression provides, in this case we’re interested in one in particular, the ‘IWindowService’ So, let’s get that bad boy… private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); } Nailed it… But why? The WindowService allows us to register our UserControl with Blend, which in turn allows people to activate and see it, which is a big plus point. So, let’s do that… We’ll create an ‘Initialize’ method to create our new control, and add it to the WindowService: private HelloControl _helloControl; public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloPanel"] == null) _windowService.RegisterPalette("HelloPanel", _helloControl, "Hello Window"); } First we check that we’re not already registered, and if we’re not we register, the first argument is the identifier used by the service to, well, identify your extension. The second argument is the actual control, the third argument is the name that people will see in the ‘Windows’ menu of Blend itself (so important note here – don’t put anything embarrassing or (need I say it?) sweary…) There are only two things to do now - Call ‘Initialize()’ from our Load method, and Export the class This is easy money – add [Export(typeof(IPackage))] to the top of our class… The full code will (should) look like this: [Export(typeof (IPackage))] public class HelloExtension : IPackage { private HelloControl _helloControl; private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); Initialize(); } public void Unload() { } public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloControl"] == null) _windowService.RegisterPalette("HelloControl", _helloControl, "Hello Window"); } } If you build this and copy it to your ‘Extensions’ folder in Blend (c:\program files\microsoft visual studio 11.0\blend\) and start Blend, you should see ‘Hello Window’ listed in the Window menu: That as they say is it!

  Read the article

• How to Hashtag (Without Being #Annoying)

  - by Mike Stiles

  The right tool in the wrong hands can be a dangerous thing. Giving a chimpanzee a chain saw would not be a pretty picture. And putting Twitter hashtags in the hands of social marketers who were never really sure how to use them can be equally unattractive. Boiled down, hashtags are for search and organization of tweets. A notch up from that, they can also be used as part of a marketing strategy. In terms of search, if you’re in the organic apple business, you want anyone who searches “organic” on Twitter to see your posts about your apples. It’s keyword tactics not unlike web site keyword search tactics. So get a clear idea of what keywords are relevant for your tweet. It’s reasonable to include #organic in your tweet. Is it fatal if you don’t hashtag the word? It depends on the person searching. If they search “organic,” your tweet’s going to come up even if you didn’t put the hashtag in front of it. If the searcher enters “#organic,” your tweet needs the hashtag. Err on the side of caution and hashtag it so it comes up no matter how the searcher enters it. You’ll also want to hashtag it for the second big reason people hashtag, organization. You can follow a hashtag. So can the rest of the Twitterverse. If you’re that into organic munchies, you can set up a stream populated only with tweets hashtagged #organic. If you’ve established a hashtag for your brand, like #nobugsprayapples, you (and everyone else) can watch what people are tweeting about your company. So what kind of hashtags should you include? They should be directly related to the core message of your tweet. Ancillary or very loosely-related hashtags = annoying. Hashtagging your brand makes sense. Hashtagging your core area of interest makes sense. Creating a specific event or campaign hashtag you want others to include and spread makes sense (the burden is on you to promote it and get it going). Hashtagging nearly every word in the tweet is highly annoying. Far and away, the majority of hashtagged words in such tweets have no relevance, are not terms that would be searched, and are not terms needed for categorization. It looks desperate and spammy. Two is fine. One is better. And it is possible to tweet with --gasp-- no hashtags! Make your hashtags as short as you can. In fact, if your brand’s name really is #nobugsprayapples, you’re burning up valuable, limited characters and risking the inability of others to retweet with added comments. Also try to narrow your topic hashtag down. You’ll find a lot of relevant users with #organic, but a lot of totally uninterested users with #food. Just as you can join online forums and gain credibility and a reputation by contributing regularly to that forum, you can follow hashtagged topics and gain the same kind of credibility in your area of expertise. Don’t just parachute in for the occasional marketing message. And if you’re constantly retweeting one particular person, stop it. It’s kissing up and it’s obvious. Which brings us to the king of hashtag annoyances, “hashjacking.” This is when you see what terms are hot and include them in your marketing tweet as a hashtag, even though it’s unrelated to your content. Justify it all you want, but #justinbieber has nothing to do with your organic apples. Equally annoying, piggybacking on a popular event’s hashtag to tweet something not connected to the event. You’re only fostering ill will and mistrust toward your account from the people you’ve tricked into seeing your tweet. Lastly, don’t @ mention people just to make sure they see your tweet. If the tweet’s not for them or about them, it’s spammy. What I haven’t covered is use of the hashtag for comedy’s sake. You’ll see this a lot and is a matter of personal taste. No one will search these hashtagged terms or need to categorize then, they’re just there for self-expression and laughs. Twitter is, after all, supposed to be fun.  What are some of your biggest Twitter pet peeves? #blogsovernow

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >