Search Results

Search found 11995 results on 480 pages for 'clement game'.

Page 331/480 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• Physics Engine [Collision Response, 2-dimensional] experts, help!! My stack is unstable!

  - by Register Sole

  Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they hardly stand still! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have: I would try adding a damping term (proportional to velocity) to the Baumgarte. Is this a good idea in general? If not I would not want to waste my time trying to tune the parameter hoping it magically works. Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :)

  Read the article

• How do you deal with transitions in animating walking?

  - by Aerovistae

  I'm pretty new to this whole animating models thing. Just learning the ropes. I got a nice walking animation going, which I can loop while a character is walking, but what about when they stop walking? I mean, they could be at any point in the animation at the time the player stops walking. How do I get them to smoothly return to a standing still position without having them snap into that position? The same goes for starting walking from a standing still position. Do you need a separate animation? How is this dealt with?

  Read the article

• how can I change object look point?

  - by jques

  I have tried to load image but system does not give permission. Please look image http://www.rps.net/gunslinger/scrnshot/gunslinger33.jpg I have two arm with two gun, I want to rotate these arm with mouse. For example, if I move mouse position to the left, arms with guns should be move also. Since this is hoby project, I am a bit confort to ask below question ; What should I do to achieve my wish ? some explanation: perspective view gun in viewing direction left click = trigger left gun perspective Feel free to change the title Thanks

  Read the article

• How to make a stack stable? Need help for an explicit resting contact scheme (2-dimensional)

  - by Register Sole

  Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they would swing! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :) EDIT In response to Cholesky's comment about warm starting the solver and Baumgarte: Oh right, I forgot to mention! I do save the contact history and the impulse determined in this time step to be used as initial guess in the next time step. As for the Baumgarte, here's what actually happens in the code. Collision is detected when the bodies' closest distance is less than SKIN, meaning they are actually still separated. If at this moment, I used the PGS solver without Baumgarte, restitution of 0 alone would be able to stop the bodies, separated by a distance of ~SKIN, in mid-air! So this isn't right, I want to have the bodies touching each other. So I turn on the Baumgarte, where its role is actually to pull the bodies together! Weird I know, a scheme intended to push the body apart becomes useful for the reverse. Also, I found that if I increase the number of iteration to 100, stacks become much more stable, though the program becomes so slow. UPDATE Since the stack swings left and right, could it be something is wrong with my friction model? Current friction constraint: relative_tangential_velocity = 0

  Read the article

• glTexImage2D not loading my data

  - by Clyde

  Can anyone suggest why this code doesn't work? When I draw using this texture all I get is black. If I use GLUtils.texImage2D() to load a png file, it works correctly. ByteBuffer bb = ByteBuffer.allocateDirect(128*128*4).order(ByteOrder.nativeOrder()); bb.position(0); for(int row = 0; row != 128; row++) { for(int i = 0 ; i != 128 ; i++) { bb.put((byte)0x80); bb.put((byte)0xFF); bb.put((byte)0xFF); bb.put((byte)i); } } int[] handle = new int[1]; GLES20.glEnable(GLES20.GL_TEXTURE_2D); GLES20.glGenTextures(1, handle, 0); DrawAdapter.checkGlError("Gen textures"); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, handle[0]); DrawAdapter.checkGlError("Bind textures"); bb.position(0); GLES20.glTexImage2D(GLES20.GL_TEXTURE_2D, 0, GLES20.GL_RGBA, 128, 128, 0, GLES20.GL_RGBA, GLES20.GL_UNSIGNED_BYTE, bb); DrawAdapter.checkGlError("glTexImage2D"); return handle[0];

  Read the article

• Handling hitboxes

  - by TheBroodian

  So I have an issue that I'm laughing at myself about, because it really seems like it should be something that I should be able to figure out pretty quickly. I am designing a 2D action platformer; I have a playable character, and a dummy 'punching bag' character for testing purposes that I've created. I've just gotten enough of both of them done that I can start prototyping and testing them in runtime. Then I realized- neither of them have references of each other (intentionally so), so how do I check for hitboxes stored within my playable character from my dummy character? Long story short, how do I make my dummy know when he's been punched by my hero?

  Read the article

• How to snap a 2D Quad to the mouse cursor using OpenGL 3.0?

  - by NoobScratcher

  I've been having issues trying to snap a 2D Quad to the mouse cursor position I'm able : 1.) To get values into posX, posY, posZ 2.) Translate with the values from those 3 variables But the quad positioning I'm not able to do correctly in such a way that the 2D Quad is near the mouse cursor using those values from those 3 variables eg."posX, posY, posZ" I need the mouse cursor in the center of the 2D Quad. I'm hoping someone can help me achieve this. I've tried searching around with no avail. Heres the function that is ment to do the snapping but instead creates weird flicker or shows nothing at all only the 3d models show up : void display() { glClearColor(0.0,0.0,0.0,1.0); glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT); for(std::vector<GLuint>::iterator I = cube.begin(); I != cube.end(); ++I) { glCallList(*I); } if(DrawArea == true) { glReadPixels(winX, winY, 1, 1, GL_DEPTH_COMPONENT, GL_FLOAT, &winZ); cerr << winZ << endl; glGetDoublev(GL_MODELVIEW_MATRIX, modelview); glGetDoublev(GL_PROJECTION_MATRIX, projection); glGetIntegerv(GL_VIEWPORT, viewport); gluUnProject(winX, winY, winZ , modelview, projection, viewport, &posX, &posY, & posZ); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_DECAL); glTexImage2D (GL_TEXTURE_2D, 0, GL_RGB, DrawAreaSurface->w, DrawAreaSurface->h, 0, GL_RGBA, GL_UNSIGNED_BYTE, DrawAreaSurface->pixels); glEnable(GL_TEXTURE_2D); glBindTexture(GL_TEXTURE_2D, DrawAreaTexture); glTranslatef(posX , posY, posZ); glBegin(GL_QUADS); glTexCoord2f (0.0, 0.0); glVertex3f(0.5, 0.5, 0); glTexCoord2f (1.0, 0.0); glVertex3f(0, 0.5, 0); glTexCoord2f (1.0, 1.0); glVertex3f(0, 0, 0); glTexCoord2f (0.0, 1.0); glVertex3f(0.5, 0, 0); glEnd(); } SwapBuffers(hDC); } I'm using : OpenGL 3.0 WIN32 API C++ GLSL if you really want the full source here it is - http://pastebin.com/1Ncm9HNf , Its pretty messy.

  Read the article

• LibGDX onTouch() method kill on touch

  - by johnny-b

  How can I add this on my application. i want to use the onTouch() method from the implementation of the InputProcessor to kill the enemies on screen. how do i do that? do i have to do anything to the enemy class? please help Thank you M @Override public boolean touchDown(int screenX, int screenY, int pointer, int button) { return false; } here is my enemy class public class Bullet extends Sprite { private Vector2 velocity; private float lifetime; public Bullet(float x, float y) { velocity = new Vector2(0, 0); } public void update(float delta) { float targetX = GameWorld.getBall().getX(); float targetY = GameWorld.getBall().getY(); float dx = targetX - getX(); float dy = targetY - getY(); float distToTarget = (float) Math.sqrt(dx * dx + dy * dy); velocity.x += dx * delta; velocity.y += dy * delta; } } i am rendering all graphics in a GameRender class and a gameworld class if you need more info please let me know Thank you

  Read the article

• Using PhysX, how can I predict where I will need to generate procedural terrain collision shapes?

  - by Sion Sheevok

  In this situation, I have terrain height values I generate procedurally. For rendering, I use the camera's position to generate an appropriate sized height map. For collision, however, I need to have height fields generated in areas where objects may intersect. My current potential solution, which may be naive, is to iterate over all "awake" physics actors, use their bounds/extents and velocities to generate spheres in which they may reside after a physics update, then generate height values for ranges encompassing clustered groups of actors. Much of that data is likely already calculated by PhysX already, however. Is there some API, maybe a set of queries, even callbacks from the spatial system, that I could use to predict where terrain height values will be needed?

  Read the article

• matrix to transform unit cube to space defined by 8 arbitrary points

  - by aadster

  I asked a question relating to similar to this already, but I think this is a clearer objective of what Im trying to achieve.. or whether its possible at all! Im trying to find a transformation (matrix ideally) which would transform the 8 points of a 3d unit cube to 8 arbitrary points in space. The 8 target points have no known structure. e.g: My gut feeling is that a matrix is unable to provide this xform since the cube faces vertices can be concave.. but are there any other methods of transformation? Thanks!

  Read the article

• Movement on the X an Z axis are combined?

  - by Magicaxis

  This is probably a stupid question, but I'm trying to simply move a 3D object up, down, left, and right (Not forward or backward). The Y axis works fine, but when I increment the object's X position, the object moves BOTH right and backwards! when I decrement X, left and forwards! setPosition(getPosition().X + 2/*times deltatime*/, getPosition().Y, getPosition().Z); I was astonished that XNA doesnt have its own setPosition function, so I made a parent class for all objects with a setPosition and Draw function. Setposition simply edits a variable "mPosition" and passes it to the common draw function: // Copy any parent transforms. Matrix[] transforms = new Matrix[block.Bones.Count]; block.CopyAbsoluteBoneTransformsTo(transforms); // Draw the model. A model can have multiple meshes, so loop. foreach (ModelMesh mesh in block.Meshes) { // This is where the mesh orientation is set, as well // as our camera and projection. foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(MathHelper.ToRadians(mOrientation.Y)) * Matrix.CreateTranslation(mPosition); effect.View = game1.getView(); effect.Projection = game1.getProjection(); } // Draw the mesh, using the effects set above. mesh.Draw(); } I tried to work it out by attempting to increment and decrement the Z axis, but nothing happens?! So using the X axis changes the objects x and z axis', but changing the Z does nothing. Great. So how do I seperate the X and Z axis movement?

  Read the article

• sprite group doesn't support indexing

  - by user3956

  I have a sprite group created with pygame.sprite.Group() (and add sprites to it with the add method) How would I retrieve the nth sprite in this group? Code like this does not work: mygroup = pygame.sprite.Group(mysprite01) print mygroup[n].rect It returns the error: group object does not support indexing. For the moment I'm using the following function: def getSpriteByPosition(position,group): for index,spr in enumerate(group): if (index == position): return spr return False Although working, it just doesn't seem right... Is there a cleaner way to do this? EDIT: I mention a "position" and index but it's not important actually, returning any single sprite from the group is enough

  Read the article

• Why am I seeing streak artifacts on the cube map I'm rendering?

  - by BobDole

  I'm getting strange streaks on my cube map when rendering to it. He is my code that is being called each frame: void drawCubeMap(void) { int face; glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glBindFramebuffer(GL_FRAMEBUFFER, fbo); //glBindTexture(GL_TEXTURE_CUBE_MAP, cubeMapTexture); //glClearColor(1.0f, 1.0f, 1.0f, 1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glViewport(0,0,sizeT, sizeT); for (face = 0; face < 6; face++) { glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, cubeMapTexture, 0); drawSpheres(); } glBindFramebuffer(GL_FRAMEBUFFER, 0); glBindTexture(GL_TEXTURE_2D, 0); glViewport(0,0,900, 900); } Any idea what it might be? The streaking occurs when I'm rotating the spheres around the main sphere.

  Read the article

• How do I make camera move at same speed when rotating and moving forward

  - by dez

  I made a camera in DX9. To move forward I press the Up arrow. To rotate on the Y axis I use the mouse. When I perform these movements on their own the camera moves at the speed I want. However, if I hold down Up and move the mouse at the same time then the camera moves a lot faster than it should. I want it to move at the same speed as it does when only the Up arrow is pressed. I think I need to normalize something somewhere but not sure what and not sure where. Have tried various combinations without success so if anyone can point me in the right direction that would be great. Thanks. I've post code below. #define KEY_DOWN(vk_code) ((GetAsyncKeyState(vk_code) & 0x8000) ? 1 : 0) LRESULT WINAPI MsgProc( HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam ) { if( KEY_DOWN(VK_UP)) MovePlayer(D3DXVECTOR3(0, 0, -1.0f)); if( KEY_DOWN(VK_DOWN)) MovePlayer(D3DXVECTOR3(0, 0, 1.0f)); switch( msg ) { case WM_MOUSEMOVE: ProcessMouseInput(); } } void MovePlayer( D3DXVECTOR3 in_vec ) { D3DXMATRIX CameraRot; D3DXMatrixRotationY(&CameraRot,D3DXToRadian(AngleY)); D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&in_vec,&CameraRot); CameraPos += (m_timeElapsed * CameraRotTarget); } void ProcessMouseInput() { GetCursorPos( &CurrentMouseState ); if ((CurrentMouseState.x != GameMouseState.x) || (CurrentMouseState.y != GameMouseState.y)) { int dx = CurrentMouseState.x - GameMouseState.x; int dy = CurrentMouseState.y - GameMouseState.y; AngleY+=m_timeElapsed*dx*7.0f; } GameMouseState = CurrentMouseState; // Set back to window center in Render function } VOID UpdateCamera() { D3DXVECTOR3 CameraOrigTarget(0, 0, -1); D3DXVECTOR3 CameraOrigUp(0, 1, 0); D3DXMATRIX CameraRot; D3DXMATRIX CameraRotX; D3DXMatrixRotationX(&CameraRotX,D3DXToRadian(AngleX)); D3DXMATRIX CameraRotY; D3DXMatrixRotationY(&CameraRotY,D3DXToRadian(AngleY)); CameraRot = CameraRotX * CameraRotY; D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&CameraOrigTarget,&CameraRot); D3DXVECTOR3 CameraTarget; CameraTarget = CameraPos + CameraRotTarget; D3DXVECTOR3 vUpVec( 0.0f, 1.0f, 0.0f ); D3DXMatrixLookAtLH( &matView, &CameraPos, &CameraTarget, &vUpVec ); g_pd3dDevice->SetTransform( D3DTS_VIEW, &matView ); D3DXMatrixPerspectiveFovLH( &matProj, D3DX_PI / 4, 1.0f, 1.0f, 100.0f ); g_pd3dDevice->SetTransform( D3DTS_PROJECTION, &matProj ); }

  Read the article

• 16-bit PNGs in Slick2D

  - by Neglected

  I'm working on a project and I'm using some 3rd party sprites just to get it off the ground; recently I've come into a hitch. Slick2D doesn't seem to want to load my images. That is, it will warn me that images are the wrong bit-depth. All the images are in 16-bit PNG form (PNG is required for transparency). Is there any way I can disable the warning (being the bad guy programmer (the console print for each individual load REALLY SLOWS DOWN the image)) or is there another solution? I was thinking about converting all images (using imagemagick) to .gif (with an alpha channel). Would there be any loss in quality between formats? EDIT: I tried using imagemagick but some of the sprites use pure black so I can't do that without wrecking the image. EDIT2: using "identify" on any of the images show them as being 8-bit.. but Slick2D won't load them. What the hell? D: EDIT3: Issue solved (ish). If you are googling this then just disable the java png loader from slick by sticking this somewhere in your code (like the main method): System.setProperty("org.newdawn.slick.pngloader", "false");

  Read the article

• Isometric Collision Detection

  - by Sleepy Rhino

  I am having some issues with trying to detect collision of two isometric tile. I have tried plotting the lines between each point on the tile and then checking for line intercepts however that didn't work (probably due to incorrect formula) After looking into this for awhile today I believe I am thinking to much into it and there must be a easier way. I am not looking for code just some advise on the best way to achieve detection of overlap

  Read the article

• Determining if something is on the right or left side of an object?

  - by meds

  I have a character in a 3D world which is facing an arbitrary direction on a flat plane, the player can click on the left or right side of the character and based on which side is clicked on a different action happens. How can I determine which side the click occured on? Obviously for straight on ahead (0,0,1) I can simply use the x coordinate of the click point to determine if it's the left or right hand side, but what about other cases?

  Read the article

• Following a set of points?

  - by user1010005

  Lets assume that i have a set of path that an entity should follow : const int Paths = 2 Vector2D<float> Path[Paths] = { Vector2D(100,0),Vector2D(100,50) }; Now i define my entity's position in a 2D vector as follows : Vector2D<float> FollowerPosition(0,0); And now i would like to move the "follower" to the path at index 1 : int PathPosition = 0; //Start with path 1 Currently i do this : Vector2D<float>& Target = Path[PathPosition]; bool Changed = false; if (FollowerPosition.X < Target.X) FollowerPosition.X += Vel,Changed = true; if (FollowerPosition.X > Target.X) FollowerPosition.X -= Vel,Changed = true; if (FollowerPosition.Y < Target.Y) FollowerPosition.Y += Vel;,Changed = true; if (FollowerPosition.Y > Target.Y) FollowerPosition.Y -= Vel,Changed = true; if (!Changed) { PathPosition = PathPosition + 1; if (PathPosition > Paths) PathPosition = 0; } Which works except for one little detail : The movement is not smooth!! ...So i would like to ask if anyone sees anything wrong with my code. Thanks and sorry for my english.

  Read the article

• How to do proper Alpha in XNA?

  - by Soshimo

  Okay, I've read several articles, tutorials, and questions regarding this. Most point to the same technique which doesn't solve my problem. I need the ability to create semi-transparent sprites (texture2D's really) and have them overlay another sprite. I can achieve that somewhat with the code samples I've found but I'm not satisfied with the results and I know there is a way to do this. In mobile programming (BREW) we did it old school and actually checked each pixel for transparency before rendering. In this case it seems to render the sprite below it blended with the alpha above it. This may be an artifact of how I'm rendering the texture but, as I said before, all examples point to this one technique. Before I go any further I'll go ahead and paste my example code. public void Draw(SpriteBatch batch, Camera camera, float alpha) { int tileMapWidth = Width; int tileMapHeight = Height; batch.Begin(SpriteSortMode.Texture, BlendState.AlphaBlend, SamplerState.PointWrap, DepthStencilState.Default, RasterizerState.CullNone, null, camera.TransformMatrix); for (int x = 0; x < tileMapWidth; x++) { for (int y = 0; y < tileMapHeight; y++) { int tileIndex = _map[y, x]; if (tileIndex != -1) { Texture2D texture = _tileTextures[tileIndex]; batch.Draw( texture, new Rectangle( (x * Engine.TileWidth), (y * Engine.TileHeight), Engine.TileWidth, Engine.TileHeight), new Color(new Vector4(1f, 1f, 1f, alpha ))); } } } batch.End(); } As you can see, in this code I'm using the overloaded SpriteBatch.Begin method which takes, among other things, a blend state. I'm almost positive that's my problem. I don't want to BLEND the sprites, I want them to be transparent when alpha is 0. In this example I can set alpha to 0 but it still renders both tiles, with the lower z ordered sprite showing through, discolored because of the blending. This is not a desired effect, I want the higher z-ordered sprite to fade out and not effect the color beneath it in such a manner. I might be way off here as I'm fairly new to XNA development so feel free to steer me in the correct direction in the event I'm going down the wrong rabbit hole. TIA

  Read the article

• Calculating the force of an impact?

  - by meds

  I'm trying to figure out a way to determine the force two objects collide in. I have two vectors defining their linear velocity at the time of impact, their mass and their angular velocity. Keep in mind this is all for a 2D physics engine. I don't think it's as simple as adding up these values and figuring out if it's large enogh it makes a large impact since that doesn't take into account if the two objects are travelling in the same direction (as an example). Any ideas?

  Read the article

• Achieve anisotropic filtering

  - by fedab

  I want to set anisotropic filtering to my scene. I use SharpDX (DirectX 11) and C#. How do i set up anisotropic filtering in my shader? Currently i try that in the shader: Texture2D tex; sampler textureSampler = sampler_state { Texture = (tex); MipFilter = Anisotropic; MagFilter = Anisotropic; MinFilter = Anisotropic; MaxAnisotropy = 16; }; float4 PShader(float4 position : SV_POSITION, float4 color:COLOR, float2 tex0 : TEXCOORD0) : SV_TARGET { float4 textureColor; textureColor = tex.Sample(textureSampler, tex0) * color; return textureColor; } I get my object, textured, but it is not filtered anisotropic. I can write everything in the Parameters, even invalid things and i don't get any errors. The result is the same, objects without applied anisotropic filtering. Do i have to set that in the shader? Can i do that also with SamplerState? I tested that but i didn't get a result too. Some steps what i have to set would be helpful.

  Read the article

• loading a heightmap as texture in shader

  - by wtherapy

  I have a height map of 256x256, containing, foreach cell, not only height as a normal float value ( not 0-1 ) and also 2 gradient values ( for X and Y ), also as normal float values ( not 0-1 ). I have uploaded the texture via normal texture loading: glEnable( GL_TEXTURE_2D ); glGenTextures( 1, &m_uglID ); DEBUG_OUTPUT("Err %x\n", glGetError()); glBindTexture( GL_TEXTURE_2D , m_uglID ); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexImage2D( GL_TEXTURE_2D, 0, GL_RGB32F, unW + 1, unH + 1, 0, GL_RGB, GL_FLOAT, pvBytes ); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_LINEAR); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_LINEAR); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); DEBUG_OUTPUT("Err %x\n", glGetError()); as a parenthesis, the debug output is: Err 500 Err 0 Err 0 Err 0 Err 500 Err 500 Err 0 Err 0 pvBytes is a 256x256 array of typedef struct _tGradientHeightCell { float v; float px; float py; } TGradientHeightCell, *LPTGradientHeightCell; then, m_ugl_HeightMapTexture = glGetUniformLocation(m_uglProgram, "TexHeightMap"); I load it via: glEnable(GL_TEXTURE_2D ); glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D , pTexture->GetID()); glUniform1i(m_ugl_HeightMapTexture, 0); in shader, I just access it: uniform sampler2D TexHeightMap; vec4 GetVertCellParameters( uint i, uint j ) { return texture( TexHeightMap, vec2( i, j ) ); } vec4 vH00 = GetVertCellParameters( i, j ); My problem is that, when passing negative values in one of the values in TGradientHeightCell ( v, px, py ), the texture is corrupted. I need the values to be passed exact as I have them in memory. Any help appreciated.

  Read the article

• Removing/Adding a specific variable from an object inside javascript array? [migrated]

  - by hustlerinc

  I have a map array with objects stuffed with variables looking like this: var map = [ [{ground:0, object:1}, {ground:0, item:2}, {ground:0, object:1, item:2}], [{ground:0, object:1}, {ground:0, item:2}, {ground:0, object:1, item:2}] ]; Now I would like to be able to delete and add one of the variables like item:2. 1) What would I use to delete specific variables? 2) What would I use to add specific variables? I just need 2 short lines of code, the rest like detecting if and where to execute I've figured out. I've tried delete map[i][j].item; with no results. Help appreciated.

  Read the article

• Y Axis inverted on vertex output

  - by Yonathan Klijnsma

  I've got my project running and somehow it seems my vertex y components are inverted. 10 in the positive on Y goes down and 10 negative on the Y axis goes up. I can't find anything with the initialization and I am not doing any negative scaling in the view matrix. I've never had something like this happen before, does anyone have some tips or things to look for ? How I am sending verteces to the GPU ( Currently intermediate mode ) glVertex3f( x_pos_n, 10, z_pos ); I am using CG in the project but even without shaders the Y axis seems to be inverted.

  Read the article

• How to populate a form list with buttons using javascript

  - by StealingMana

  I made a script that, when you press one button(accessories) the selection(mylist) populates with one array(accessoryData), and when you hit the other button(weapons) the other array(weaponData) populates the selection. However, in the current state of the code the second button press is not re-populating the selection. What is wrong here? Also if there is a more efficient way to do this, that might be helpful. Full code function runList(form, test) { var html = ""; var x; dataType(test); while (x < dataType.length) { html += "<option>" + dataType[x]; x++; } document.getElementById("mylist").innerHTML = html; }

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >