Search Results

Search found 44476 results on 1780 pages for 'wcf test client'.

Page 331/1780 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Unable to setup postgres on ubuntu (8.4 on 9.10)

  - by shabda

  I am trying to setup postgres on ubuntu, and I cant proceed as I cant find the location of pg_hba.conf (Postgres 8.4 on ubuntu 9.10) What I did setup postgres via aptitude This gave me ... /usr/share/postgresql/8.4# aptitude install postgresql Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following NEW packages will be installed: libreadline5{a} postgresql postgresql-8.4{a} postgresql-client-8.4{a} postgresql-client-common{a} postgresql-common{a} 0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/5,159kB of archives. After unpacking 18.8MB will be used. Do you want to continue? [Y/n/?] Y Writing extended state information... Done Preconfiguring packages ... Selecting previously deselected package libreadline5. (Reading database ... 17490 files and directories currently installed.) Unpacking libreadline5 (from .../libreadline5_5.2-6_amd64.deb) ... Selecting previously deselected package postgresql-client-common. Unpacking postgresql-client-common (from .../postgresql-client-common_101_all.deb) ... Selecting previously deselected package postgresql-client-8.4. Unpacking postgresql-client-8.4 (from .../postgresql-client-8.4_8.4.1-1_amd64.deb) ... Selecting previously deselected package postgresql-common. Unpacking postgresql-common (from .../postgresql-common_101_all.deb) ... Selecting previously deselected package postgresql-8.4. Unpacking postgresql-8.4 (from .../postgresql-8.4_8.4.1-1_amd64.deb) ... Selecting previously deselected package postgresql. Unpacking postgresql (from .../postgresql_8.4.1-1_all.deb) ... Processing triggers for man-db ... Setting up libreadline5 (5.2-6) ... Setting up postgresql-client-common (101) ... Setting up postgresql-client-8.4 (8.4.1-1) ... update-alternatives: using /usr/share/postgresql/8.4/man/man1/psql.1.gz to provide /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode. Setting up postgresql-common (101) ... Setting up postgresql-8.4 (8.4.1-1) ... update-alternatives: using /usr/share/postgresql/8.4/man/man1/postmaster.1.gz to provide /usr/share/man/man1/postmaster.1.gz (postmaster.1.gz) in auto mode. Setting up postgresql (8.4.1-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done tried to login as su - postgres Followed by createdb mytestdb This failed with could not connect to database postgres: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? So I though I need to enable local connections in pg_hba.conf, which I cant find. So I created a new file as sudo vim /etc/postgresql/8.4/main/pg_hba.conf With values local all all ident But I still cant login after restarting the service. What are next steps for me to take.

  Read the article

• KVM guest io is much slower than host io: is that normal?

  - by Evolver

  I have a Qemu-KVM host system setup on CentOS 6.3. Four 1TB SATA HDDs working in Software RAID10. Guest CentOS 6.3 is installed on separate LVM. People say that they see guest performance almost equal to host performance, but I don't see that. My i/o tests are showing 30-70% slower performance on guest than on host system. I tried to change scheduler (set elevator=deadline on host and elevator=noop on guest), set blkio.weight to 1000 in cgroup, change io to virtio... But none of these changes gave me any significant results. This is a guest .xml config part: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/vgkvmnode/lv2'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> There are my tests: Host system: iozone test # iozone -a -i0 -i1 -i2 -s8G -r64k random random KB reclen write rewrite read reread read write 8388608 64 189930 197436 266786 267254 28644 66642 dd read test: one process and then four simultaneous processes # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct 1073741824 bytes (1.1 GB) copied, 4.23044 s, 254 MB/s # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 14.4528 s, 74.3 MB/s 1073741824 bytes (1.1 GB) copied, 14.562 s, 73.7 MB/s 1073741824 bytes (1.1 GB) copied, 14.6341 s, 73.4 MB/s 1073741824 bytes (1.1 GB) copied, 14.7006 s, 73.0 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 6.2039 s, 173 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 32.7173 s, 32.8 MB/s 1073741824 bytes (1.1 GB) copied, 32.8868 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9097 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9688 s, 32.6 MB/s Guest system: iozone test # iozone -a -i0 -i1 -i2 -s512M -r64k random random KB reclen write rewrite read reread read write 524288 64 93374 154596 141193 149865 21394 46264 dd read test: one process and then four simultaneous processes # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 1073741824 bytes (1.1 GB) copied, 5.04356 s, 213 MB/s # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 24.7348 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7378 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7408 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.744 s, 43.4 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 10.415 s, 103 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 49.8874 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8608 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8693 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.9427 s, 21.5 MB/s I wonder is that normal situation or did I missed something?

  Read the article

• HTML Presence Controls for Communications Server 14 CodePlex Project

  Showing Presence on the Web If youre running Office Communicator Server 2007 R2, you know that your only out-of-the-box option for showing presence on the web is to use the NameControl ActiveX control that ships as part of Office.  Being an ActiveX control, this obviously means that youre limited to Internet Explorer.  Also, nobody likes ActiveX controls What if you want to show the presence of users in a pure ASP.NET or HTML application and cant assume that the user has Communicator installed you need anASP.NET or HTML presence control.  HTML Presence Controls for Microsoft Communications Server 14 We recently worked with the UC team at Microsoft on a keynote demo for TechEd 2010 in New Orleans.  The demo was for a fictitious airline Fabrikam Airlines that wanted to show the presence of customer service and reservations agents on its website.  Customers could also start an instant message conversation with the agents using a Silverlight web chat window that used WCF to communicate with the backend UCMA application. We built HTML Presence Controls that use AJAX to poll a REST-based WCF service running in IIS and hosting a UCMA 3.0 presence subscription application.   Microsoft has graciously allowed us to publish these on CodePlex so that the development community can benefit from them:  http://htmlpresencecontrols.codeplex.com/ We will be maintaining the CodePlex project as new builds of UCMA 3.0 become available.  Check out the project home page on CodePlex for some more in-depth details on how the controls are implemented. ASP.NET Server Control Implementation Were providing an ASP.NET Server Control implementation that you can use stand-alone or in a GridView or Repeater (or other layout control).  The control has properties that allow you to control its appearance, e.g. you can choose whether or not to show the contacts name or availability text. You can also use the server control in a layout control such as a GridView by putting it in a TemplateColumn and binding to the Sip Uri in the data source. Disclaimer Once we started working on these, we realized why Microsoft hasnt shipped such controls as part of the product.  There are some tradeoffs you have to be aware of when using these controls, heres the high level. Privacy The backend UCMA 3.0 application that subscribes to presence of contacts runs as a trusted application and can thus retrieve the presence of any user in the organization.  Theres currently no good way in UCMA to apply any privacy rules to ensure that the consumer of the presence controls has permission to see the presence of the contacts that the controls are bound to.  Just to be absolutely crystal clear These controls provide a way to query the presence of any user in the organization, regardless of the privacy relationship between the person consuming the controls and the contacts whose presence is being displayed. Were exploring options for a design pattern that would allow you to inject some privacy controls.  Keep in mind though that you would most likely be responsible for implementing this logic, as there is currently no functionality in UCMA that allows you to do that. Polling the WCF REST Service The controls poll the backend WCF service to retrieve the presence of contacts - you can control the refresh interval so that they poll less often. We implemented a caching layer so that the WCF service is always communicating with a presence cache it never communicates directly with Communications Server.  For example, if your web page is showing the presence of sip:[email protected] and 500 people have the page open, the presence cache only contains one instance of the subscription Communications Server is not being polled 500 times for the presence of that contact. Once the presence of a contact changes, it is updated in the cache.  There are some server-based push mechanisms that would work nicely here, such as the one that Outlook Web Access 2010 uses.  Unfortunately we didnt have time to explore these options. Community Contribution Take a look at the project Issue Tracker, there are a couple of things we can use some help with.  Shoot me a note if youre interested in contributing to the project. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Book Review: Programming Windows Identity Foundation

  - by DigiMortal

  Programming Windows Identity Foundation by Vittorio Bertocci is right now the only serious book about Windows Identity Foundation available. I started using Windows Identity Foundation when I made my first experiments on Windows Azure AppFabric Access Control Service. I wanted to generalize the way how people authenticate theirselves to my systems and AppFabric ACS seemed to me like good point where to start. My first steps trying to get things work opened the door to whole new authentication world for me. As I went through different blog postings and articles to get more information I discovered that the thing I am trying to use is the one I am looking for. As best security API for .NET was found I wanted to know more about it and this is how I found Programming Windows Identity Foundation. What’s inside? Programming WIF focuses on architecture, design and implementation of WIF. I think Vittorio is very good at teaching people because you find no too complex topics from the book. You learn more and more as you read and as a good thing you will find that you can also try out your new knowledge on WIF immediately. After giving good overview about WIF author moves on and introduces how to use WIF in ASP.NET applications. You will get complete picture how WIF integrates to ASP.NET request processing pipeline and how you can control the process by yourself. There are two chapters about ASP.NET. First one is more like introduction and the second one goes deeper and deeper until you have very good idea about how to use ASP.NET and WIF together, what issues you may face and how you can configure and extend WIF. Other two chapters cover using WIF with Windows Communication Foundation (WCF) band   Windows Azure. WCF chapter expects that you know WCF very well. This is not introductory chapter for beginners, this is heavy reading if you are not familiar with WCF. The chapter about Windows Azure describes how to use WIF in cloud applications. Last chapter talks about some future developments of WIF and describer some problems and their solutions. Most interesting part of this chapter is section about Silverlight. Who should read this book? Programming WIF is targeted to developers. It does not matter if you are beginner or old bullet-proof professional – every developer should be able to be read this book with no difficulties. I don’t recommend this book to administrators and project managers because they find almost nothing that is related to their work. I strongly recommend this book to all developers who are interested in modern authentication methods on Microsoft platform. The book is written so well that I almost forgot all things around me when I was reading the book. All additional tools you need are free. There is also Azure AppFabric ACS test version available and you can try it out for free. Table of contents Foreword Acknowledgments Introduction Part I Windows Identity Foundation for Everybody 1 Claims-Based Identity 2 Core ASP.NET Programming Part II Windows Identity Foundation for Identity Developers 3 WIF Processing Pipeline in ASP.NET 4 Advanced ASP.NET Programming 5 WIF and WCF 6 WIF and Windows Azure 7 The Road Ahead Index

  Read the article

• Lock statement vs Monitor.Enter method.

  - by Vokinneberg

  I suppose it is an interesting code example. We have a class, let's call it Test with Finalize method. In Main method here is two code blocks where i am using lock statement and Monitor.Enter call. Also i have two instances of class Test here. The experiment is pretty simple - nulling Test variable within locking block and try to collect it manually with GC.Collect method call. So, to see the Finilaze call i am calling GC.WaitForPendingFinalizers method. Everything is very simple as you can see. By defenition of lock statement it's opens by compiler to try{...}finally{..} block with Minitor.Enter call inside of try block and Monitor.Exit in finally block. I've tryed to implement try-finally block manually. I've expected the same behaviour in both cases. in case of using lock and in case of unsing Monitor.Enter. But, surprize, surprize - it is different as you can see below. public class Test : IDisposable { private string name; public Test(string name) { this.name = name; } ~Test() { Console.WriteLine(string.Format("Finalizing class name {0}.", name)); } } class Program { static void Main(string[] args) { var test1 = new Test("Test1"); var test2 = new Test("Tesst2"); lock (test1) { test1 = null; Console.WriteLine("Manual collect 1."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 2."); GC.Collect(); } var lockTaken = false; System.Threading.Monitor.Enter(test2, ref lockTaken); try { test2 = null; Console.WriteLine("Manual collect 3."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 4."); GC.Collect(); } finally { System.Threading.Monitor.Exit(test2); } Console.ReadLine(); } } Output of this example is Manual collect 1. Manual collect 2. Manual collect 3. Finalizing class name Test2. Manual collect 4. And null reference exception in last finally block because test2 is null reference. I've was surprised and disasembly my code into IL. So, here is IL dump of Main method. .entrypoint .maxstack 2 .locals init ( [0] class ConsoleApplication2.Test test1, [1] class ConsoleApplication2.Test test2, [2] bool lockTaken, [3] bool <>s__LockTaken0, [4] class ConsoleApplication2.Test CS$2$0000, [5] bool CS$4$0001) L_0000: nop L_0001: ldstr "Test1" L_0006: newobj instance void ConsoleApplication2.Test::.ctor(string) L_000b: stloc.0 L_000c: ldstr "Tesst2" L_0011: newobj instance void ConsoleApplication2.Test::.ctor(string) L_0016: stloc.1 L_0017: ldc.i4.0 L_0018: stloc.3 L_0019: ldloc.0 L_001a: dup L_001b: stloc.s CS$2$0000 L_001d: ldloca.s <>s__LockTaken0 L_001f: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0024: nop L_0025: nop L_0026: ldnull L_0027: stloc.0 L_0028: ldstr "Manual collect." L_002d: call void [mscorlib]System.Console::WriteLine(string) L_0032: nop L_0033: call void [mscorlib]System.GC::Collect() L_0038: nop L_0039: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_003e: nop L_003f: ldstr "Manual collect." L_0044: call void [mscorlib]System.Console::WriteLine(string) L_0049: nop L_004a: call void [mscorlib]System.GC::Collect() L_004f: nop L_0050: nop L_0051: leave.s L_0066 L_0053: ldloc.3 L_0054: ldc.i4.0 L_0055: ceq L_0057: stloc.s CS$4$0001 L_0059: ldloc.s CS$4$0001 L_005b: brtrue.s L_0065 L_005d: ldloc.s CS$2$0000 L_005f: call void [mscorlib]System.Threading.Monitor::Exit(object) L_0064: nop L_0065: endfinally L_0066: nop L_0067: ldc.i4.0 L_0068: stloc.2 L_0069: ldloc.1 L_006a: ldloca.s lockTaken L_006c: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0071: nop L_0072: nop L_0073: ldnull L_0074: stloc.1 L_0075: ldstr "Manual collect." L_007a: call void [mscorlib]System.Console::WriteLine(string) L_007f: nop L_0080: call void [mscorlib]System.GC::Collect() L_0085: nop L_0086: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_008b: nop L_008c: ldstr "Manual collect." L_0091: call void [mscorlib]System.Console::WriteLine(string) L_0096: nop L_0097: call void [mscorlib]System.GC::Collect() L_009c: nop L_009d: nop L_009e: leave.s L_00aa L_00a0: nop L_00a1: ldloc.1 L_00a2: call void [mscorlib]System.Threading.Monitor::Exit(object) L_00a7: nop L_00a8: nop L_00a9: endfinally L_00aa: nop L_00ab: call string [mscorlib]System.Console::ReadLine() L_00b0: pop L_00b1: ret .try L_0019 to L_0053 finally handler L_0053 to L_0066 .try L_0072 to L_00a0 finally handler L_00a0 to L_00aa I does not see any difference between lock statement and Monitor.Enter call. So, why i steel have a reference to the instance of test1 in case of lock, and object is not collected by GC, but in case of using Monitor.Enter it is collected and finilized?

  Read the article

• Silverlight Cream for February 02, 2011 -- #1039

  - by Dave Campbell

  In this Issue: Tony Champion, Gill Cleeren, Alex van Beek, Michael James, Ollie Riches, Peter Kuhn, Mike Ormond, WindowsPhoneGeek(-2-), Daniel N. Egan, Loek Van Den Ouweland, and Paul Thurott. Above the Fold: Silverlight: "Using the AutoCompleteBox" Peter Kuhn WP7: "Windows Phone Image Button" Loek Van Den Ouweland Training: "New WP7 Virtual Labs" Daniel N. Egan Shoutouts: SilverlightShow has their top 5 most popular news articles up: SilverlightShow for Jan 24-30, 2011 Rudi Grobler posted answers he gives to questions about Silverlight - Where do I start? Brian Noyes starts a series of Webinars at SilverlightShow this morning at 10am PDT: Free Silverlight Show Webinar: Querying and Updating Data From Silverlight Clients with WCF RIA Services Join your fellow geeks at Gangplank in Chandler Arizona this Saturday as Scott Cate and AZGroups brings you Azure Boot Camp – Feb 5th 2011 From SilverlightCream.com: Deploying Silverlight with WCF Services Tony Champion takes a step out of his norm (Pivot) and has a post up about deploying WCF Services with your SL app, and how to take the pain out of that without pulling out your hair. Getting ready for Microsoft Silverlight Exam 70-506 (Part 3) Gill Cleeren's part 3 of getting ready for the Silverlight Exam is up at SilverlightShow... with links to the first two parts. There's so much good information linked off these... thanks Gill and 'The Show'! A guide through WCF RIA Services attributes Alex van Beek has a post up you will probably want to bookmark unless you're not using WCF RIA... do you know all the attributes by heart? ... how about an excellent explanation of 10 of them? Using DeferredLoadListBox in a Pivot Control Michael James discusses using the DeferredLoadListBox, and then also using it with the Pivot control... but not without some pain points which he defines and gives the workaround for. WP7: Know your data Ollie Riches' latest is about Data and WP7 ... specifically 'knowing' what data you're needing/using to avoid the 90MB memory limit... He gives a set of steps to follow to measure your data model to avoid getting in trouble. Using the AutoCompleteBox Peter Kuhn takes a great look at the AutoCompleteBox... the basics, and then well beyond with custom data, item templates, custom filters, asynchronous filtering, and a behavior for MVVM async filtering. OData and Windows Phone 7 Part 2 Mike Ormond has part 2 of his OData/WP7 post up... lashing up the images to go along with the code this time out... nice looking app. WP7 RoundToggleButton and RoundButton in depth WindowsPhoneGeek is checking out the RoundToggleButton and RoundButton controls from the Coding4fun Toolkit in detail... of course where to get them, and then the setup, demo project included. All about Dependency Properties in Silverlight for WP7 WindowsPhoneGeek's latest post is a good dependency-property discussion related to WP7 development, but if you're just learning, it's a good place to learn about the subject. New WP7 Virtual Labs Daniel N. Egan posted links to 6 new WP7 Virtual Labs released on 1/25. Windows Phone Image Button Loek Van Den Ouweland has a style up on his blog that gives you an imageButton for your WP7 apps, and a sweet little video showing how it's done in Expression Blend too. Yet another free Windows Phone book for developers Paul Thurott found a link to another Free eBook for WP7 development. This one is by Puja Pramudya and is an English translation of the original, and is an introductory text, but hey... it's free... give it a look! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• EPM 11.1.2.2 Architecture: Financial Performance Management Applications

  - by Marc Schumacher

   Financial Management can be accessed either by a browser based client or by SmartView. Starting from release 11.1.2.2, the Financial Management Windows client does not longer access the Financial Management Consolidation server. All tasks that require an on line connection (e.g. load and extract tasks) can only be done using the web interface. Any client connection initiated by a browser or SmartView is send to the Oracle HTTP server (OHS) first. Based on the path given (e.g. hfmadf, hfmofficeprovider) in the URL, OHS makes a decision to forward this request either to the new Financial Management web application based on the Oracle Application Development Framework (ADF) or to the .NET based application serving SmartView retrievals running on Internet Information Server (IIS). Any requests send to the ADF web interface that need to be processed by the Financial Management application server are send to the IIS using HTTP protocol and will be forwarded further using DCOM to the Financial Management application server. SmartView requests, which are processes by IIS in first row, are forwarded to the Financial Management application server using DCOM as well. The Financial Management Application Server uses OLE DB database connections via native database clients to talk to the Financial Management database schema. Communication between the Financial Management DME Listener, which handles requests from EPMA, and the Financial Management application server is based on DCOM.  Unlike most other components Essbase Analytics Link (EAL) does not have an end user interface. The only user interface is a plug-in for the Essbase Administration Services console, which is used for administration purposes only. End users interact with a Transparent or Replicated Partition that is created in Essbase and populated with data by EAL. The Analytics Link Server deployed on WebLogic communicates through HTTP protocol with the Analytics Link Financial Management Connector that is deployed in IIS on the Financial Management web server. Analytics Link Server interacts with the Data Synchronisation server using the EAL API. The Data Synchronization server acts as a target of a Transparent or Replicated Partition in Essbase and uses a native database client to connect to the Financial Management database. Analytics Link Server uses JDBC to connect to relational repository databases and Essbase JAPI to connect to Essbase.  As most Oracle EPM System products, browser based clients and SmartView can be used to access Planning. The Java based Planning web application is deployed on WebLogic, which is configured behind an Oracle HTTP Server (OHS). Communication between Planning and the Planning RMI Registry Service is done using Java Remote Message Invocation (RMI). Planning uses JDBC to access relational repository databases and talks to Essbase using the CAPI. Be aware of the fact that beside the Planning System database a dedicated database schema is needed for each application that is set up within Planning.  As Planning, Profitability and Cost Management (HPCM) has a pretty simple architecture. Beside the browser based clients and SmartView, a web service consumer can be used as a client too. All clients access the Java based web application deployed on WebLogic through Oracle HHTP Server (OHS). Communication between Profitability and Cost Management and EPMA Web Server is done using HTTP protocol. JDBC is used to access the relational repository databases as well as data sources. Essbase JAPI is utilized to talk to Essbase.  For Strategic Finance, two clients exist, SmartView and a Windows client. While SmartView communicates through the web layer to the Strategic Finance Server, Strategic Finance Windows client makes a direct connection to the Strategic Finance Server using RPC calls. Connections from Strategic Finance Web as well as from Strategic Finance Web Services to the Strategic Finance Server are made using RPC calls too. The Strategic Finance Server uses its own file based data store. JDBC is used to connect to the EPM System Registry from web and application layer.  Disclosure Management has three kinds of clients. While the browser based client and SmartView interact with the Disclosure Management web application directly through Oracle HTTP Server (OHS), Taxonomy Designer does not connect to the Disclosure Management server. Communication to relational repository databases is done via JDBC, to connect to Essbase the Essbase JAPI is utilized.

  Read the article

• What is stopping data flow with .NET 3.5 asynchronous System.Net.Sockets.Socket?

  - by TonyG

  I have a .NET 3.5 client/server socket interface using the asynchronous methods. The client connects to the server and the connection should remain open until the app terminates. The protocol consists of the following pattern: send stx receive ack send data1 receive ack send data2 (repeat 5-6 while more data) receive ack send etx So a single transaction with two datablocks as above would consist of 4 sends from the client. After sending etx the client simply waits for more data to send out, then begins the next transmission with stx. I do not want to break the connection between individual exchanges or after each stx/data/etx payload. Right now, after connection, the client can send the first stx, and get a single ack, but I can't put more data onto the wire after that. Neither side disconnects, the socket is still intact. The client code is seriously abbreviated as follows - I'm following the pattern commonly available in online code samples. private void SendReceive(string data) { // ... SocketAsyncEventArgs completeArgs; completeArgs.Completed += new EventHandler<SocketAsyncEventArgs>(OnSend); clientSocket.SendAsync(completeArgs); // two AutoResetEvents, one for send, one for receive if ( !AutoResetEvent.WaitAll(autoSendReceiveEvents , -1) ) Log("failed"); else Log("success"); // ... } private void OnSend( object sender , SocketAsyncEventArgs e ) { // ... Socket s = e.UserToken as Socket; byte[] receiveBuffer = new byte[ 4096 ]; e.SetBuffer(receiveBuffer , 0 , receiveBuffer.Length); e.Completed += new EventHandler<SocketAsyncEventArgs>(OnReceive); s.ReceiveAsync(e); // ... } private void OnReceive( object sender , SocketAsyncEventArgs e ) {} // ... if ( e.BytesTransferred > 0 ) { Int32 bytesTransferred = e.BytesTransferred; String received = Encoding.ASCII.GetString(e.Buffer , e.Offset , bytesTransferred); dataReceived += received; } autoSendReceiveEvents[ SendOperation ].Set(); // could be moved elsewhere autoSendReceiveEvents[ ReceiveOperation ].Set(); // releases mutexes } The code on the server is very similar except that it receives first and then sends a response - the server is not doing anything (that I can tell) to modify the connection after it sends a response. The problem is that the second time I hit SendReceive in the client, the connection is already in a weird state. Do I need to do something in the client to preserve the SocketAsyncEventArgs, and re-use the same object for the lifetime of the socket/connection? I'm not sure which eventargs object should hang around during the life of the connection or a given exchange. Do I need to do something, or Not do something in the server to ensure it continues to Receive data? The server setup and response processing looks like this: void Start() { // ... listenSocket.Bind(...); listenSocket.Listen(0); StartAccept(null); // note accept as soon as we start. OK? mutex.WaitOne(); } void StartAccept(SocketAsyncEventArgs acceptEventArg) { if ( acceptEventArg == null ) { acceptEventArg = new SocketAsyncEventArgs(); acceptEventArg.Completed += new EventHandler<SocketAsyncEventArgs>(OnAcceptCompleted); } Boolean willRaiseEvent = this.listenSocket.AcceptAsync(acceptEventArg); if ( !willRaiseEvent ) ProcessAccept(acceptEventArg); // ... } private void OnAcceptCompleted( object sender , SocketAsyncEventArgs e ) { ProcessAccept(e); } private void ProcessAccept( SocketAsyncEventArgs e ) { // ... SocketAsyncEventArgs readEventArgs = new SocketAsyncEventArgs(); readEventArgs.SetBuffer(dataBuffer , 0 , Int16.MaxValue); readEventArgs.Completed += new EventHandler<SocketAsyncEventArgs>(OnIOCompleted); readEventArgs.UserToken = e.AcceptSocket; dataReceived = ""; // note server is degraded for single client/thread use // As soon as the client is connected, post a receive to the connection. Boolean willRaiseEvent = e.AcceptSocket.ReceiveAsync(readEventArgs); if ( !willRaiseEvent ) this.ProcessReceive(readEventArgs); // Accept the next connection request. this.StartAccept(e); } private void OnIOCompleted( object sender , SocketAsyncEventArgs e ) { // switch ( e.LastOperation ) case SocketAsyncOperation.Receive: ProcessReceive(e); // similar to client code // operate on dataReceived here case SocketAsyncOperation.Send: ProcessSend(e); // similar to client code } // execute this when a data has been processed into a response (ack, etc) private SendResponseToClient(string response) { // create buffer with response // currentEventArgs has class scope and is re-used currentEventArgs.SetBuffer(sendBuffer , 0 , sendBuffer.Length); Boolean willRaiseEvent = currentClient.SendAsync(currentEventArgs); if ( !willRaiseEvent ) ProcessSend(currentEventArgs); } A .NET trace shows the following when sending ABC\r\n: Socket#7588182::SendAsync() Socket#7588182::SendAsync(True#1) Data from Socket#7588182::FinishOperation(SendAsync) 00000000 : 41 42 43 0D 0A Socket#7588182::ReceiveAsync() Exiting Socket#7588182::ReceiveAsync() - True#1 And it stops there. It looks just like the first send from the client but the server shows no activity. I think that could be info overload for now but I'll be happy to provide more details as required. Thanks!

  Read the article

• Asynchrony in C# 5 (Part I)

  - by javarg

  I’ve been playing around with the new Async CTP preview available for download from Microsoft. It’s amazing how language trends are influencing the evolution of Microsoft’s developing platform. Much effort is being done at language level today than previous versions of .NET. In these post series I’ll review some major features contained in this release: Asynchronous functions TPL Dataflow Task based asynchronous Pattern Part I: Asynchronous Functions This is a mean of expressing asynchronous operations. This kind of functions must return void or Task/Task<> (functions returning void let us implement Fire & Forget asynchronous operations). The two new keywords introduced are async and await. async: marks a function as asynchronous, indicating that some part of its execution may take place some time later (after the method call has returned). Thus, all async functions must include some kind of asynchronous operations. This keyword on its own does not make a function asynchronous thought, its nature depends on its implementation. await: allows us to define operations inside a function that will be awaited for continuation (more on this later). Async function sample: Async/Await Sample async void ShowDateTimeAsync() {     while (true)     {         var client = new ServiceReference1.Service1Client();         var dt = await client.GetDateTimeTaskAsync();         Console.WriteLine("Current DateTime is: {0}", dt);         await TaskEx.Delay(1000);     } } The previous sample is a typical usage scenario for these new features. Suppose we query some external Web Service to get data (in this case the current DateTime) and we do so at regular intervals in order to refresh user’s UI. Note the async and await functions working together. The ShowDateTimeAsync method indicate its asynchronous nature to the caller using the keyword async (that it may complete after returning control to its caller). The await keyword indicates the flow control of the method will continue executing asynchronously after client.GetDateTimeTaskAsync returns. The latter is the most important thing to understand about the behavior of this method and how this actually works. The flow control of the method will be reconstructed after any asynchronous operation completes (specified with the keyword await). This reconstruction of flow control is the real magic behind the scene and it is done by C#/VB compilers. Note how we didn’t use any of the regular existing async patterns and we’ve defined the method very much like a synchronous one. Now, compare the following code snippet  in contrast to the previuous async/await: Traditional UI Async void ComplicatedShowDateTime() {     var client = new ServiceReference1.Service1Client();     client.GetDateTimeCompleted += (s, e) =>     {         Console.WriteLine("Current DateTime is: {0}", e.Result);         client.GetDateTimeAsync();     };     client.GetDateTimeAsync(); } The previous implementation is somehow similar to the first shown, but more complicated. Note how the while loop is implemented as a chained callback to the same method (client.GetDateTimeAsync) inside the event handler (please, do not do this in your own application, this is just an example).  How it works? Using an state workflow (or jump table actually), the compiler expands our code and create the necessary steps to execute it, resuming pending operations after any asynchronous one. The intention of the new Async/Await pattern is to let us think and code as we normally do when designing and algorithm. It also allows us to preserve the logical flow control of the program (without using any tricky coding patterns to accomplish this). The compiler will then create the necessary workflow to execute operations as the happen in time.

  Read the article

• Representing Mauritius in the 2013 Bench Games

  Only by chance I came across an interesting option for professionals and enthusiasts in IT, and quite honestly I can't even remember where I caught attention of Brainbench and their 2013 Bench Games event. But having access to 600+ free exams in a friendly international intellectual competition doesn't happen to be available every day. So, it was actually a no-brainer to sign up and browse through the various categories. Most interestingly, Brainbench is not only IT-related. They offer a vast variety of fields in their Test Center, like Languages and Communication, Office Skills, Management, Aptitude, etc., and it can be a little bit messy about how things are organised. Anyway, while browsing through their test offers I added a couple of exams to 'My Plan' which I would give a shot afterwards. Self-assessments Actually, I took the tests based on two major aspects: 'Fun Factor' and 'How good would I be in general'... Usually, you have to pay for any kind of exams and given this unique chance by Brainbench to simply train this kind of tests was already worth the time. Frankly speaking, the tests are very close to the ones you would be asked to do at Prometric or Pearson Vue, ie. Microsoft exams, etc. Go through a set of multiple choice questions in a given time frame. Most of the tests I did during the Bench Games were based on 40 questions, each with a maximum of 3 minutes to answer. Ergo, one test in maximum 2 hours - that sounds feasible, doesn't it? The Measure of Achievement While the 2013 Bench Games are considered a worldwide friendly competition of knowledge I was really eager to get other Mauritians attracted. Using various social media networks and community activities it all looked quite well at the beginning. Mauritius was listed on rank #19 of Most Certified Citizens and rank #10 of Most Master Level Certified Nation - not bad, not bad... Until... the next update of the Bench Games Leaderboard. The downwards trend seemed to be unstoppable and I couldn't understand why my results didn't show up on the Individual Leader Board. First of all, I passed exams that were not even listed and second, I had better results on some exams listed. After some further information from the organiser it turned out that my test transcript wasn't available to the public. Only then results are considered and counted in the competition. During that time, I actually managed to hold 3 test results on the Individuals... Other participants were merciless, eh, more successful than me, produced better test results than I did. But still I managed to stay on the final score board: An 'exotic' combination of exam, test result, country and person itself Representing Mauritius and the Visual FoxPro community in that fun event. And although I mainly develop in Visual FoxPro 9.0 SP2 and C# using .NET Framework from 2.0 to 4.5 since a couple of years I still managed to pass on Master Level. Hm, actually my Microsoft Certified Programmer (MCP) exams are dated back in June 2004 - more than 9 years ago... Look who got lucky... As described above I did a couple of exams as time allowed and without any preparations, but still I received the following mail notification: "Thank you for recently participating in our Bench Games event.  We wanted to inform you that you obtained a top score on our test(s) during this event, and as a result, will receive a free annual Brainbench subscription.  Your annual subscription will give you access to all our tests just like Bench Games, but for an entire year plus additional benefits!" -- Leader Board Notification from Brainbench Even fun activities get rewarded sometimes. Thanks to @Brainbench_com for the free annual subscription based on my passed 2013 Bench Games Master Level exam. It would be interesting to know about the total figures, especially to see how many citizens of Mauritius took part in this year's Bench Games. Anyway, I'm looking forward to be able to participate in other challenges like this in the future.

  Read the article

• Different behavior for REF CURSOR between Oracle 10g and 11g when unique index present?

  - by wweicker

  Description I have an Oracle stored procedure that has been running for 7 or so years both locally on development instances and on multiple client test and production instances running Oracle 8, then 9, then 10, and recently 11. It has worked consistently until the upgrade to Oracle 11g. Basically, the procedure opens a reference cursor, updates a table then completes. In 10g the cursor will contain the expected results but in 11g the cursor will be empty. No DML or DDL changed after the upgrade to 11g. This behavior is consistent on every 10g or 11g instance I've tried (10.2.0.3, 10.2.0.4, 11.1.0.7, 11.2.0.1 - all running on Windows). The specific code is much more complicated but to explain the issue in somewhat realistic overview: I have some data in a header table and a bunch of child tables that will be output to PDF. The header table has a boolean (NUMBER(1) where 0 is false and 1 is true) column indicating whether that data has been processed yet. The view is limited to only show rows in that have not been processed (the view also joins on some other tables, makes some inline queries and function calls, etc). So at the time when the cursor is opened, the view shows one or more rows, then after the cursor is opened an update statement runs to flip the flag in the header table, a commit is issued, then the procedure completes. On 10g, the cursor opens, it contains the row, then the update statement flips the flag and running the procedure a second time would yield no data. On 11g, the cursor never contains the row, it's as if the cursor does not open until after the update statement runs. I'm concerned that something may have changed in 11g (hopefully a setting that can be configured) that might affect other procedures and other applications. What I'd like to know is whether anyone knows why the behavior is different between the two database versions and whether the issue can be resolved without code changes. Update 1: I managed to track the issue down to a unique constraint. It seems that when the unique constraint is present in 11g the issue is reproducible 100% of the time regardless of whether I'm running the real world code against the actual objects or the following simple example. Update 2: I was able to completely eliminate the view from the equation. I have updated the simple example to show the problem exists even when querying directly against the table. Simple Example CREATE TABLE tbl1 ( col1 VARCHAR2(10), col2 NUMBER(1) ); INSERT INTO tbl1 (col1, col2) VALUES ('TEST1', 0); /* View is no longer required to demonstrate the problem CREATE OR REPLACE VIEW vw1 (col1, col2) AS SELECT col1, col2 FROM tbl1 WHERE col2 = 0; */ CREATE OR REPLACE PACKAGE pkg1 AS TYPE refWEB_CURSOR IS REF CURSOR; PROCEDURE proc1 (crs OUT refWEB_CURSOR); END pkg1; CREATE OR REPLACE PACKAGE BODY pkg1 IS PROCEDURE proc1 (crs OUT refWEB_CURSOR) IS BEGIN OPEN crs FOR SELECT col1 FROM tbl1 WHERE col1 = 'TEST1' AND col2 = 0; UPDATE tbl1 SET col2 = 1 WHERE col1 = 'TEST1'; COMMIT; END proc1; END pkg1; Anonymous Block Demo DECLARE crs1 pkg1.refWEB_CURSOR; TYPE rectype1 IS RECORD ( col1 vw1.col1%TYPE ); rec1 rectype1; BEGIN pkg1.proc1 ( crs1 ); DBMS_OUTPUT.PUT_LINE('begin first test'); LOOP FETCH crs1 INTO rec1; EXIT WHEN crs1%NOTFOUND; DBMS_OUTPUT.PUT_LINE(rec1.col1); END LOOP; DBMS_OUTPUT.PUT_LINE('end first test'); END; /* After creating this index, the problem is seen */ CREATE UNIQUE INDEX unique_col1 ON tbl1 (col1); /* Reset data to initial values */ TRUNCATE TABLE tbl1; INSERT INTO tbl1 (col1, col2) VALUES ('TEST1', 0); DECLARE crs1 pkg1.refWEB_CURSOR; TYPE rectype1 IS RECORD ( col1 vw1.col1%TYPE ); rec1 rectype1; BEGIN pkg1.proc1 ( crs1 ); DBMS_OUTPUT.PUT_LINE('begin second test'); LOOP FETCH crs1 INTO rec1; EXIT WHEN crs1%NOTFOUND; DBMS_OUTPUT.PUT_LINE(rec1.col1); END LOOP; DBMS_OUTPUT.PUT_LINE('end second test'); END; Example of what the output on 10g would be:   begin first test   TEST1   end first test   begin second test   TEST1   end second test Example of what the output on 11g would be:   begin first test   TEST1   end first test   begin second test   end second test Clarification I can't remove the COMMIT because in the real world scenario the procedure is called from a web application. When the data provider on the front end calls the procedure it will issue an implicit COMMIT when disconnecting from the database anyways. So if I remove the COMMIT in the procedure then yes, the anonymous block demo would work but the real world scenario would not because the COMMIT would still happen. Question Why is 11g behaving differently? Is there anything I can do other than re-write the code?

  Read the article

• RHEL 5.5 Yum Update Fails Dependency Error

  - by user65788

  I have 30 different RHEL 5.5 machines that will not update some 33 packages via Yum. Does anyone know why these packages will not install and how to correct this? Yum clean all does not fix the issue, however skip broken will allow other updates to install but I am really after a way to clear this up for good. They are stock boxes with RHEL subscription and not using any yum repositories other than Red Hat's own official repositories. They have not been updated for over a year! yum update Loaded plugins: rhnplugin, security rhel-i386-client-5 | 1.4 kB 00:00 rhel-i386-client-5/primary | 2.8 MB 00:09 rhel-i386-client-5 6607/6607 Skipping security plugin, no data Setting up Update Process Resolving Dependencies Skipping security plugin, no data --> Running transaction check ---> Package autofs.i386 1:5.0.1-0.rc2.143.el5_5.6 set to be updated ---> Package cpp.i386 0:4.1.2-48.el5 set to be updated --> Processing Dependency: curl = 7.15.5-2.1.el5_3.5 for package: curl-devel ---> Package curl.i386 0:7.15.5-9.el5 set to be updated --> Processing Dependency: cyrus-sasl-lib = 2.1.22-5.el5 for package: cyrus-sasl-devel ---> Package cyrus-sasl-lib.i386 0:2.1.22-5.el5_4.3 set to be updated ---> Package cyrus-sasl-md5.i386 0:2.1.22-5.el5_4.3 set to be updated ---> Package cyrus-sasl-plain.i386 0:2.1.22-5.el5_4.3 set to be updated --> Processing Dependency: db4 = 4.3.29-10.el5 for package: db4-devel ---> Package db4.i386 0:4.3.29-10.el5_5.2 set to be updated --> Processing Dependency: dbus = 1.1.2-12.el5 for package: dbus-devel ---> Package dbus.i386 0:1.1.2-14.el5 set to be updated ---> Package dbus-libs.i386 0:1.1.2-14.el5 set to be updated ---> Package dbus-x11.i386 0:1.1.2-14.el5 set to be updated ---> Package e2fsprogs.i386 0:1.39-23.el5_5.1 set to be updated --> Processing Dependency: e2fsprogs-libs = 1.39-23.el5 for package: e2fsprogs-devel ---> Package e2fsprogs-libs.i386 0:1.39-23.el5_5.1 set to be updated ---> Package esc.i386 0:1.1.0-12.el5 set to be updated --> Processing Dependency: expat = 1.95.8-8.2.1 for package: expat-devel ---> Package expat.i386 0:1.95.8-8.3.el5_5.3 set to be updated ---> Package firefox.i386 0:3.6.13-2.el5 set to be updated --> Processing Dependency: freetype = 2.2.1-21.el5_3 for package: freetype-devel ---> Package freetype.i386 0:2.2.1-28.el5_5.1 set to be updated --> Processing Dependency: gcc = 4.1.2-46.el5_4.1 for package: gcc-c++ --> Processing Dependency: gcc = 4.1.2-46.el5_4.1 for package: gcc-gfortran ---> Package gcc.i386 0:4.1.2-48.el5 set to be updated --> Processing Dependency: gd = 2.0.33-9.4.el5_1.1 for package: gd-devel ---> Package gd.i386 0:2.0.33-9.4.el5_4.2 set to be updated --> Processing Dependency: gnome-vfs2 = 2.16.2-4.el5 for package: gnome-vfs2-devel ---> Package gnome-vfs2.i386 0:2.16.2-6.el5_5.1 set to be updated ---> Package gnome-vfs2-smb.i386 0:2.16.2-6.el5_5.1 set to be updated --> Processing Dependency: gnutls = 1.4.1-3.el5_3.5 for package: gnutls-devel ---> Package gnutls.i386 0:1.4.1-3.el5_4.8 set to be updated --> Processing Dependency: gtk2 = 2.10.4-20.el5 for package: gtk2-devel ---> Package gtk2.i386 0:2.10.4-21.el5_5.6 set to be updated --> Processing Dependency: hal = 0.5.8.1-52.el5 for package: hal-devel ---> Package hal.i386 0:0.5.8.1-59.el5 set to be updated --> Processing Dependency: krb5-libs = 1.6.1-36.el5 for package: krb5-devel ---> Package krb5-libs.i386 0:1.6.1-36.el5_5.6 set to be updated ---> Package krb5-workstation.i386 0:1.6.1-36.el5_5.6 set to be updated --> Processing Dependency: libXi = 1.0.1-3.1 for package: libXi-devel ---> Package libXi.i386 0:1.0.1-4.el5_4 set to be updated --> Processing Dependency: libXrandr = 1.1.1-3.1 for package: libXrandr-devel ---> Package libXrandr.i386 0:1.1.1-3.3 set to be updated --> Processing Dependency: libXt = 1.0.2-3.1.fc6 for package: libXt-devel ---> Package libXt.i386 0:1.0.2-3.2.el5 set to be updated --> Processing Dependency: libgfortran = 4.1.2-46.el5_4.1 for package: gcc-gfortran ---> Package libgfortran.i386 0:4.1.2-48.el5 set to be updated --> Processing Dependency: libsepol = 1.15.2-2.el5 for package: libsepol-devel ---> Package libsepol.i386 0:1.15.2-3.el5 set to be updated --> Processing Dependency: libstdc++ = 4.1.2-46.el5_4.1 for package: gcc-c++ --> Processing Dependency: libstdc++ = 4.1.2-46.el5_4.1 for package: libstdc++-devel ---> Package libstdc++.i386 0:4.1.2-48.el5 set to be updated --> Processing Dependency: mesa-libGL = 6.5.1-7.7.el5 for package: mesa-libGL-devel ---> Package mesa-libGL.i386 0:6.5.1-7.8.el5 set to be updated --> Processing Dependency: mesa-libGLU = 6.5.1-7.7.el5 for package: mesa-libGLU-devel ---> Package mesa-libGLU.i386 0:6.5.1-7.8.el5 set to be updated --> Processing Dependency: newt = 0.52.2-12.el5_4.1 for package: newt-devel ---> Package newt.i386 0:0.52.2-15.el5 set to be updated --> Processing Dependency: nspr = 4.7.6-1.el5_4 for package: nspr-devel ---> Package nspr.i386 0:4.8.6-1.el5 set to be updated --> Processing Dependency: nss = 3.12.3.99.3-1.el5_3.2 for package: nss-devel ---> Package nss.i386 0:3.12.8-1.el5 set to be updated ---> Package nss-tools.i386 0:3.12.8-1.el5 set to be updated --> Processing Dependency: openldap = 2.3.43-3.el5 for package: openldap-devel ---> Package openldap.i386 0:2.3.43-12.el5_5.3 set to be updated ---> Package openldap-clients.i386 0:2.3.43-12.el5_5.3 set to be updated --> Processing Dependency: openssl = 0.9.8e-12.el5 for package: openssl-devel ---> Package openssl.i686 0:0.9.8e-12.el5_5.7 set to be updated --> Processing Dependency: pam = 0.99.6.2-6.el5 for package: pam-devel ---> Package pam.i386 0:0.99.6.2-6.el5_5.2 set to be updated --> Processing Dependency: popt = 1.10.2.3-18.el5 for package: rpm-devel --> Processing Dependency: popt = 1.10.2.3-18.el5 for package: rpm-build ---> Package popt.i386 0:1.10.2.3-20.el5_5.1 set to be updated --> Processing Dependency: python = 2.4.3-27.el5 for package: python-devel ---> Package python.i386 0:2.4.3-27.el5_5.3 set to be updated --> Processing Dependency: rpm = 4.4.2.3-18.el5 for package: rpm-devel --> Processing Dependency: rpm = 4.4.2.3-18.el5 for package: rpm-build ---> Package rpm.i386 0:4.4.2.3-20.el5_5.1 set to be updated --> Processing Dependency: rpm-libs = 4.4.2.3-18.el5 for package: rpm-devel --> Processing Dependency: rpm-libs = 4.4.2.3-18.el5 for package: rpm-build ---> Package rpm-libs.i386 0:4.4.2.3-20.el5_5.1 set to be updated ---> Package rpm-python.i386 0:4.4.2.3-20.el5_5.1 set to be updated ---> Package xulrunner.i386 0:1.9.2.13-3.el5 set to be updated ---> Package xulrunner-devel.i386 0:1.9.2.7-2.el5 set to be updated --> Processing Dependency: xulrunner = 1.9.2.7-2.el5 for package: xulrunner-devel --> Processing Dependency: nss-devel >= 3.12.6 for package: xulrunner-devel --> Processing Dependency: nspr-devel >= 4.8 for package: xulrunner-devel --> Processing Dependency: libnotify-devel for package: xulrunner-devel ---> Package yelp.i386 0:2.16.0-26.el5 set to be updated rhel-i386-client-5/filelists | 16 MB 00:45 --> Finished Dependency Resolution xulrunner-devel-1.9.2.7-2.el5.i386 from rhel-i386-client-5 has depsolving problems --> Missing Dependency: libnotify-devel is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) mesa-libGLU-devel-6.5.1-7.7.el5.i386 from installed has depsolving problems --> Missing Dependency: mesa-libGLU = 6.5.1-7.7.el5 is needed by package mesa-libGLU-devel-6.5.1-7.7.el5.i386 (installed) python-devel-2.4.3-27.el5.i386 from installed has depsolving problems --> Missing Dependency: python = 2.4.3-27.el5 is needed by package python-devel-2.4.3-27.el5.i386 (installed) nss-devel-3.12.3.99.3-1.el5_3.2.i386 from installed has depsolving problems --> Missing Dependency: nss = 3.12.3.99.3-1.el5_3.2 is needed by package nss-devel-3.12.3.99.3-1.el5_3.2.i386 (installed) libstdc++-devel-4.1.2-46.el5_4.1.i386 from installed has depsolving problems --> Missing Dependency: libstdc++ = 4.1.2-46.el5_4.1 is needed by package libstdc++-devel-4.1.2-46.el5_4.1.i386 (installed) xulrunner-devel-1.9.2.7-2.el5.i386 from rhel-i386-client-5 has depsolving problems --> Missing Dependency: nspr-devel >= 4.8 is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) gcc-c++-4.1.2-46.el5_4.1.i386 from installed has depsolving problems --> Missing Dependency: libstdc++ = 4.1.2-46.el5_4.1 is needed by package gcc-c++-4.1.2-46.el5_4.1.i386 (installed) rpm-devel-4.4.2.3-18.el5.i386 from installed has depsolving problems --> Missing Dependency: rpm-libs = 4.4.2.3-18.el5 is needed by package rpm-devel-4.4.2.3-18.el5.i386 (installed) xulrunner-devel-1.9.2.7-2.el5.i386 from rhel-i386-client-5 has depsolving problems --> Missing Dependency: xulrunner = 1.9.2.7-2.el5 is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) nspr-devel-4.7.6-1.el5_4.i386 from installed has depsolving problems --> Missing Dependency: nspr = 4.7.6-1.el5_4 is needed by package nspr-devel-4.7.6-1.el5_4.i386 (installed) libXrandr-devel-1.1.1-3.1.i386 from installed has depsolving problems --> Missing Dependency: libXrandr = 1.1.1-3.1 is needed by package libXrandr-devel-1.1.1-3.1.i386 (installed) libsepol-devel-1.15.2-2.el5.i386 from installed has depsolving problems --> Missing Dependency: libsepol = 1.15.2-2.el5 is needed by package libsepol-devel-1.15.2-2.el5.i386 (installed) libXt-devel-1.0.2-3.1.fc6.i386 from installed has depsolving problems --> Missing Dependency: libXt = 1.0.2-3.1.fc6 is needed by package libXt-devel-1.0.2-3.1.fc6.i386 (installed) mesa-libGL-devel-6.5.1-7.7.el5.i386 from installed has depsolving problems --> Missing Dependency: mesa-libGL = 6.5.1-7.7.el5 is needed by package mesa-libGL-devel-6.5.1-7.7.el5.i386 (installed) openldap-devel-2.3.43-3.el5.i386 from installed has depsolving problems --> Missing Dependency: openldap = 2.3.43-3.el5 is needed by package openldap-devel-2.3.43-3.el5.i386 (installed) openssl-devel-0.9.8e-12.el5.i386 from installed has depsolving problems --> Missing Dependency: openssl = 0.9.8e-12.el5 is needed by package openssl-devel-0.9.8e-12.el5.i386 (installed) dbus-devel-1.1.2-12.el5.i386 from installed has depsolving problems --> Missing Dependency: dbus = 1.1.2-12.el5 is needed by package dbus-devel-1.1.2-12.el5.i386 (installed) newt-devel-0.52.2-12.el5_4.1.i386 from installed has depsolving problems --> Missing Dependency: newt = 0.52.2-12.el5_4.1 is needed by package newt-devel-0.52.2-12.el5_4.1.i386 (installed) gnome-vfs2-devel-2.16.2-4.el5.i386 from installed has depsolving problems --> Missing Dependency: gnome-vfs2 = 2.16.2-4.el5 is needed by package gnome-vfs2-devel-2.16.2-4.el5.i386 (installed) gnutls-devel-1.4.1-3.el5_3.5.i386 from installed has depsolving problems --> Missing Dependency: gnutls = 1.4.1-3.el5_3.5 is needed by package gnutls-devel-1.4.1-3.el5_3.5.i386 (installed) rpm-build-4.4.2.3-18.el5.i386 from installed has depsolving problems --> Missing Dependency: rpm-libs = 4.4.2.3-18.el5 is needed by package rpm-build-4.4.2.3-18.el5.i386 (installed) gd-devel-2.0.33-9.4.el5_1.1.i386 from installed has depsolving problems --> Missing Dependency: gd = 2.0.33-9.4.el5_1.1 is needed by package gd-devel-2.0.33-9.4.el5_1.1.i386 (installed) e2fsprogs-devel-1.39-23.el5.i386 from installed has depsolving problems --> Missing Dependency: e2fsprogs-libs = 1.39-23.el5 is needed by package e2fsprogs-devel-1.39-23.el5.i386 (installed) xulrunner-devel-1.9.2.7-2.el5.i386 from rhel-i386-client-5 has depsolving problems --> Missing Dependency: nss-devel >= 3.12.6 is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) krb5-devel-1.6.1-36.el5.i386 from installed has depsolving problems --> Missing Dependency: krb5-libs = 1.6.1-36.el5 is needed by package krb5-devel-1.6.1-36.el5.i386 (installed) gcc-gfortran-4.1.2-46.el5_4.1.i386 from installed has depsolving problems --> Missing Dependency: libgfortran = 4.1.2-46.el5_4.1 is needed by package gcc-gfortran-4.1.2-46.el5_4.1.i386 (installed) curl-devel-7.15.5-2.1.el5_3.5.i386 from installed has depsolving problems --> Missing Dependency: curl = 7.15.5-2.1.el5_3.5 is needed by package curl-devel-7.15.5-2.1.el5_3.5.i386 (installed) pam-devel-0.99.6.2-6.el5.i386 from installed has depsolving problems --> Missing Dependency: pam = 0.99.6.2-6.el5 is needed by package pam-devel-0.99.6.2-6.el5.i386 (installed) rpm-build-4.4.2.3-18.el5.i386 from installed has depsolving problems --> Missing Dependency: rpm = 4.4.2.3-18.el5 is needed by package rpm-build-4.4.2.3-18.el5.i386 (installed) expat-devel-1.95.8-8.2.1.i386 from installed has depsolving problems --> Missing Dependency: expat = 1.95.8-8.2.1 is needed by package expat-devel-1.95.8-8.2.1.i386 (installed) gcc-c++-4.1.2-46.el5_4.1.i386 from installed has depsolving problems --> Missing Dependency: gcc = 4.1.2-46.el5_4.1 is needed by package gcc-c++-4.1.2-46.el5_4.1.i386 (installed) gtk2-devel-2.10.4-20.el5.i386 from installed has depsolving problems --> Missing Dependency: gtk2 = 2.10.4-20.el5 is needed by package gtk2-devel-2.10.4-20.el5.i386 (installed) gcc-gfortran-4.1.2-46.el5_4.1.i386 from installed has depsolving problems --> Missing Dependency: gcc = 4.1.2-46.el5_4.1 is needed by package gcc-gfortran-4.1.2-46.el5_4.1.i386 (installed) cyrus-sasl-devel-2.1.22-5.el5.i386 from installed has depsolving problems --> Missing Dependency: cyrus-sasl-lib = 2.1.22-5.el5 is needed by package cyrus-sasl-devel-2.1.22-5.el5.i386 (installed) rpm-devel-4.4.2.3-18.el5.i386 from installed has depsolving problems --> Missing Dependency: popt = 1.10.2.3-18.el5 is needed by package rpm-devel-4.4.2.3-18.el5.i386 (installed) db4-devel-4.3.29-10.el5.i386 from installed has depsolving problems --> Missing Dependency: db4 = 4.3.29-10.el5 is needed by package db4-devel-4.3.29-10.el5.i386 (installed) rpm-build-4.4.2.3-18.el5.i386 from installed has depsolving problems --> Missing Dependency: popt = 1.10.2.3-18.el5 is needed by package rpm-build-4.4.2.3-18.el5.i386 (installed) rpm-devel-4.4.2.3-18.el5.i386 from installed has depsolving problems --> Missing Dependency: rpm = 4.4.2.3-18.el5 is needed by package rpm-devel-4.4.2.3-18.el5.i386 (installed) libXi-devel-1.0.1-3.1.i386 from installed has depsolving problems --> Missing Dependency: libXi = 1.0.1-3.1 is needed by package libXi-devel-1.0.1-3.1.i386 (installed) hal-devel-0.5.8.1-52.el5.i386 from installed has depsolving problems --> Missing Dependency: hal = 0.5.8.1-52.el5 is needed by package hal-devel-0.5.8.1-52.el5.i386 (installed) freetype-devel-2.2.1-21.el5_3.i386 from installed has depsolving problems --> Missing Dependency: freetype = 2.2.1-21.el5_3 is needed by package freetype-devel-2.2.1-21.el5_3.i386 (installed) Error: Missing Dependency: libgfortran = 4.1.2-46.el5_4.1 is needed by package gcc-gfortran-4.1.2-46.el5_4.1.i386 (installed) Error: Missing Dependency: libsepol = 1.15.2-2.el5 is needed by package libsepol-devel-1.15.2-2.el5.i386 (installed) Error: Missing Dependency: libstdc++ = 4.1.2-46.el5_4.1 is needed by package gcc-c++-4.1.2-46.el5_4.1.i386 (installed) Error: Missing Dependency: mesa-libGL = 6.5.1-7.7.el5 is needed by package mesa-libGL-devel-6.5.1-7.7.el5.i386 (installed) Error: Missing Dependency: mesa-libGLU = 6.5.1-7.7.el5 is needed by package mesa-libGLU-devel-6.5.1-7.7.el5.i386 (installed) Error: Missing Dependency: freetype = 2.2.1-21.el5_3 is needed by package freetype-devel-2.2.1-21.el5_3.i386 (installed) Error: Missing Dependency: hal = 0.5.8.1-52.el5 is needed by package hal-devel-0.5.8.1-52.el5.i386 (installed) Error: Missing Dependency: libXt = 1.0.2-3.1.fc6 is needed by package libXt-devel-1.0.2-3.1.fc6.i386 (installed) Error: Missing Dependency: openldap = 2.3.43-3.el5 is needed by package openldap-devel-2.3.43-3.el5.i386 (installed) Error: Missing Dependency: libstdc++ = 4.1.2-46.el5_4.1 is needed by package libstdc++-devel-4.1.2-46.el5_4.1.i386 (installed) Error: Missing Dependency: nss-devel >= 3.12.6 is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) Error: Missing Dependency: newt = 0.52.2-12.el5_4.1 is needed by package newt-devel-0.52.2-12.el5_4.1.i386 (installed) Error: Missing Dependency: gnutls = 1.4.1-3.el5_3.5 is needed by package gnutls-devel-1.4.1-3.el5_3.5.i386 (installed) Error: Missing Dependency: gnome-vfs2 = 2.16.2-4.el5 is needed by package gnome-vfs2-devel-2.16.2-4.el5.i386 (installed) Error: Missing Dependency: libXrandr = 1.1.1-3.1 is needed by package libXrandr-devel-1.1.1-3.1.i386 (installed) Error: Missing Dependency: python = 2.4.3-27.el5 is needed by package python-devel-2.4.3-27.el5.i386 (installed) Error: Missing Dependency: gcc = 4.1.2-46.el5_4.1 is needed by package gcc-c++-4.1.2-46.el5_4.1.i386 (installed) Error: Missing Dependency: libnotify-devel is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) Error: Missing Dependency: popt = 1.10.2.3-18.el5 is needed by package rpm-devel-4.4.2.3-18.el5.i386 (installed) Error: Missing Dependency: openssl = 0.9.8e-12.el5 is needed by package openssl-devel-0.9.8e-12.el5.i386 (installed) Error: Missing Dependency: curl = 7.15.5-2.1.el5_3.5 is needed by package curl-devel-7.15.5-2.1.el5_3.5.i386 (installed) Error: Missing Dependency: xulrunner = 1.9.2.7-2.el5 is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) Error: Missing Dependency: nspr = 4.7.6-1.el5_4 is needed by package nspr-devel-4.7.6-1.el5_4.i386 (installed) Error: Missing Dependency: nss = 3.12.3.99.3-1.el5_3.2 is needed by package nss-devel-3.12.3.99.3-1.el5_3.2.i386 (installed) Error: Missing Dependency: popt = 1.10.2.3-18.el5 is needed by package rpm-build-4.4.2.3-18.el5.i386 (installed) Error: Missing Dependency: libXi = 1.0.1-3.1 is needed by package libXi-devel-1.0.1-3.1.i386 (installed) Error: Missing Dependency: nspr-devel >= 4.8 is needed by package xulrunner-devel-1.9.2.7-2.el5.i386 (rhel-i386-client-5) Error: Missing Dependency: pam = 0.99.6.2-6.el5 is needed by package pam-devel-0.99.6.2-6.el5.i386 (installed) Error: Missing Dependency: rpm = 4.4.2.3-18.el5 is needed by package rpm-build-4.4.2.3-18.el5.i386 (installed) Error: Missing Dependency: cyrus-sasl-lib = 2.1.22-5.el5 is needed by package cyrus-sasl-devel-2.1.22-5.el5.i386 (installed) Error: Missing Dependency: gtk2 = 2.10.4-20.el5 is needed by package gtk2-devel-2.10.4-20.el5.i386 (installed) Error: Missing Dependency: dbus = 1.1.2-12.el5 is needed by package dbus-devel-1.1.2-12.el5.i386 (installed) Error: Missing Dependency: db4 = 4.3.29-10.el5 is needed by package db4-devel-4.3.29-10.el5.i386 (installed) Error: Missing Dependency: rpm-libs = 4.4.2.3-18.el5 is needed by package rpm-build-4.4.2.3-18.el5.i386 (installed) Error: Missing Dependency: gcc = 4.1.2-46.el5_4.1 is needed by package gcc-gfortran-4.1.2-46.el5_4.1.i386 (installed) Error: Missing Dependency: expat = 1.95.8-8.2.1 is needed by package expat-devel-1.95.8-8.2.1.i386 (installed) Error: Missing Dependency: gd = 2.0.33-9.4.el5_1.1 is needed by package gd-devel-2.0.33-9.4.el5_1.1.i386 (installed) Error: Missing Dependency: krb5-libs = 1.6.1-36.el5 is needed by package krb5-devel-1.6.1-36.el5.i386 (installed) Error: Missing Dependency: rpm = 4.4.2.3-18.el5 is needed by package rpm-devel-4.4.2.3-18.el5.i386 (installed) Error: Missing Dependency: rpm-libs = 4.4.2.3-18.el5 is needed by package rpm-devel-4.4.2.3-18.el5.i386 (installed) Error: Missing Dependency: e2fsprogs-libs = 1.39-23.el5 is needed by package e2fsprogs-devel-1.39-23.el5.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The repolist is yum repolist all Loaded plugins: rhnplugin, security repo id repo name status rhel-debuginfo Red Hat Enterprise Linux 5Client - i386 - Deb disabled rhel-debuginfo-beta Red Hat Enterprise Linux 5Client Beta - i386 disabled rhel-i386-client-5 Red Hat Enterprise Linux Desktop (v. 5 for 32 enabled: 6,607 repolist: 6,607

  Read the article

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• ASP.NET WebAPI Security 2: Identity Architecture

  - by Your DisplayName here!

  Pedro has beaten me to the punch with a detailed post (and diagram) about the WebAPI hosting architecture. So go read his post first, then come back so we can have a closer look at what that means for security. The first important takeaway is that WebAPI is hosting independent-  currently it ships with two host integration implementations – one for ASP.NET (aka web host) and WCF (aka self host). Pedro nicely shows the integration into the web host. Self hosting is not done yet so we will mainly focus on the web hosting case and I will point out security related differences when they exist. The interesting part for security (amongst other things of course) is the HttpControllerHandler (see Pedro’s diagram) – this is where the host specific representation of an HTTP request gets converted to the WebAPI abstraction (called HttpRequestMessage). The ConvertRequest method does the following: Create a new HttpRequestMessage. Copy URI, method and headers from the HttpContext. Copies HttpContext.User to the Properties<string, object> dictionary on the HttpRequestMessage. The key used for that can be found on HttpPropertyKeys.UserPrincipalKey (which resolves to “MS_UserPrincipal”). So the consequence is that WebAPI receives whatever IPrincipal has been set by the ASP.NET pipeline (in the web hosting case). Common questions are: Are there situations where is property does not get set? Not in ASP.NET – the DefaultAuthenticationModule in the HTTP pipeline makes sure HttpContext.User (and Thread.CurrentPrincipal – more on that later) are always set. Either to some authenticated user – or to an anonymous principal. This may be different in other hosting environments (again more on that later). Why so generic? Keep in mind that WebAPI is hosting independent and may run on a host that materializes identity completely different compared to ASP.NET (or .NET in general). This gives them a way to evolve the system in the future. How does WebAPI code retrieve the current client identity? HttpRequestMessage has an extension method called GetUserPrincipal() which returns the property as an IPrincipal. A quick look at self hosting shows that the moral equivalent of HttpControllerHandler.ConvertRequest() is HttpSelfHostServer.ProcessRequestContext(). Here the principal property gets only set when the host is configured for Windows authentication (inconsisteny). Do I like that? Well – yes and no. Here are my thoughts: I like that it is very straightforward to let WebAPI inherit the client identity context of the host. This might not always be what you want – think of an ASP.NET app that consists of UI and APIs – the UI might use Forms authentication, the APIs token based authentication. So it would be good if the two parts would live in a separate security world. It makes total sense to have this generic hand off point for identity between the host and WebAPI. It also makes total sense for WebAPI plumbing code (especially handlers) to use the WebAPI specific identity abstraction. But – c’mon we are running on .NET. And the way .NET represents identity is via IPrincipal/IIdentity. That’s what every .NET developer on this planet is used to. So I would like to see a User property of type IPrincipal on ApiController. I don’t like the fact that Thread.CurrentPrincipal is not populated. T.CP is a well established pattern as a one stop shop to retrieve client identity on .NET.  That makes a lot of sense – even if the name is misleading at best. There might be existing library code you want to call from WebAPI that makes use of T.CP (e.g. PrincipalPermission, or a simple .Name or .IsInRole()). Having the client identity as an ambient property is useful for code that does not have access to the current HTTP request (for calling GetUserPrincipal()). I don’t like the fact that that the client identity conversion from host to WebAPI is inconsistent. This makes writing security plumbing code harder. I think the logic should always be: If the host has a client identity representation, copy it. If not, set an anonymous principal on the request message. Btw – please don’t annoy me with the “but T.CP is static, and static is bad for testing” chant. T.CP is a getter/setter and, in fact I find it beneficial to be able to set different security contexts in unit tests before calling in some logic. And, in case you have wondered – T.CP is indeed thread static (and the name comes from a time where a logical operation was bound to a thread – which is not true anymore). But all thread creation APIs in .NET actually copy T.CP to the new thread they create. This is the case since .NET 2.0 and is certainly an improvement compared to how Win32 does things. So to sum it up: The host plumbing copies the host client identity to WebAPI (this is not perfect yet, but will surely be improved). or in other words: The current WebAPI bits don’t ship with any authentication plumbing, but solely use whatever authentication (and thus client identity) is set up by the host. WebAPI developers can retrieve the client identity from the HttpRequestMessage. Hopefully my proposed changes around T.CP and the User property on ApiController will be added. In the next post, I will detail how to add WebAPI specific authentication support, e.g. for Basic Authentication and tokens. This includes integrating the notion of claims based identity. After that we will look at the built-in authorization bits and how to improve them as well. Stay tuned.

  Read the article

• Resetting Your Oracle User Password with SQL Developer

  - by thatjeffsmith

  There’s nothing more annoying than having to email, call, or log a support ticket to have one of your accounts reset. This is no less annoying in the Oracle database. Those pesky security folks have determined that your password should only be valid for X days, and your time is up. Time to reset the password! Except…you can’t log into the database to reset your password. What now? Wait a second, look at this nifty thing I see in SQL Developer: Right click on my connection, reset password not available! Why not? The JDBC Driver Doesn’t Support This Operation We can’t make this call over the Oracle JDBC layer, because it hasn’t been implemented. However our primary interface, OCI, does indeed support this. In order to use the Oracle Call Interface (OCI), you need to have an Oracle Client on your machine. The good news is that this is fairly easy to get going. The Instant Client will do. You have two options, the full or ‘Lite’ Instant Clients. If you want SQL*Plus and the other client tools, go for the full. If you just want the basic drivers, go for the Lite. Either of these is fine, but mind the bit level and version of Oracle! Make sure you get a 32 bit Instant Client if you run 32 bit SQL Developer or 64 bit if you run 64 Here’s the download link What, you didn’t believe me? Mind the version of Oracle too! You want to be at the same level or higher of the database you’re working with. You can use a 11.2.0.3 client with 11.2.0.1 database but not a 10gR2 client with 11gR2 database. Clear as mud? Download and Extract Put it where you want – Program Files is as good as place as any if you have the rights. When you’re done, copy that directory path you extracted the archive to, because we’re going to add it to your Windows PATH environment variable. The easiest way to find this in Windows 7 is to open the Start dialog and type ‘path’. In Windows 8 you’ll cast your spell and wave at your screen until something happens. I recommend you put it up front so we find our DLLs first. Now with that set, let’s start up SQL Developer. Check the Connection Context menu again Bingo! What happened there? SQL Developer looks to see if it can find the OCI resources. Guess where it looks? That’s right, the PATH. If it finds what it’s looking for, and confirms the bit level is right, it will activate the Reset Password option. We have a Preference to ‘force’ an OCI/THICK connection that gives you a few other edge case features, but you do not need to enable this to activate the Reset Password. Not necessary, but won’t hurt anything either. There are a few actual benefits to using OCI powered connections, but that’s beyond the scope of today’s blog post…to be continued. Ok, so we’re ready to go. Now, where was I again? Oh yeah, my password has expired… Right click on your connection and now choose ‘Reset Password’ You’ll need to know your existing password and select a new one that meets your databases’s security standards. I Need Another Option, This Ain’t Working! If you have another account in the database, you can use the DBA Panel to reset a user’s password, or of course you can spark up a SQL*Plus session and issue the ALTER USER JEFF IDENTIFIED BY _________; command – but you knew this already, yes? I need more help ‘installing’ the Instant Client, help! There are lots and lots of resources out there on this subject. But I also know from personal experience that many of you have problems getting this to ‘work.’ The key things to remember is to download the right bit level AND make sure the client install directory is in your path. I know many folks that will just ‘install’ the Instant Client directly to one of their ‘bin’ type directories. You can do that if you want, but I prefer the cleaner method. Of course if you lack admin privs to change the PATH variable, that might be your only option. Or you could do what the original ORA- message indicated and ‘contact your DBA.’

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer

  - by Elton Stoneman

  This is the second in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Part 2 is nice and easy. From Part 1 we exposed our service over the Azure Service Bus Relay using the netTcpRelayBinding and verified we could set up our network to listen for relayed messages. Assuming we want to consume that service in .NET from an environment which is fairly unrestricted for us, but quite restricted for attackers, we can use netTcpRelay and shared secret authentication. Pattern applicability This is a good fit for scenarios where: the consumer can run .NET in full trust the environment does not restrict use of external DLLs the runtime environment is secure enough to keep shared secrets the service does not need to know who is consuming it the service does not need to know who the end-user is So for example, the consumer is an ASP.NET website sitting in a cloud VM or Azure worker role, where we can keep the shared secret in web.config and we don't need to flow any identity through to the on-premise service. The service doesn't care who the consumer or end-user is - say it's a reference data service that provides a list of vehicle manufacturers. Provided you can authenticate with ACS and have access to Service Bus endpoint, you can use the service and it doesn't care who you are. In this post, we’ll consume the service from Part 1 in ASP.NET using netTcpRelay. The code for Part 2 (+ Part 1) is on GitHub here: IPASBR Part 2 Authenticating and authorizing with ACS In this scenario the consumer is a server in a controlled environment, so we can use a shared secret to authenticate with ACS, assuming that there is governance around the environment and the codebase which will prevent the identity being compromised. From the provider's side, we will create a dedicated service identity for this consumer, so we can lock down their permissions. The provider controls the identity, so the consumer's rights can be revoked. We'll add a new service identity for the namespace in ACS , just as we did for the serviceProvider identity in Part 1. I've named the identity fullTrustConsumer. We then need to add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus (see Part 1 for a walkthrough creating Service Idenitities): Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: fullTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send This sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. Adding a Service Reference The Part 2 sample client code is ready to go, but if you want to replicate the steps, you’re going to add a WSDL reference, add a reference to Microsoft.ServiceBus and sort out the ServiceModel config. In Part 1 we exposed metadata for our service, so we can browse to the WSDL locally at: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc?wsdl If you add a Service Reference to that in a new project you'll get a confused config section with a customBinding, and a set of unrecognized policy assertions in the namespace http://schemas.microsoft.com/netservices/2009/05/servicebus/connect. If you NuGet the ASB package (“windowsazure.servicebus”) first and add the service reference - you'll get the same messy config. Either way, the WSDL should have downloaded and you should have the proxy code generated. You can delete the customBinding entries and copy your config from the service's web.config (this is already done in the sample project in Sixeyed.Ipasbr.NetTcpClient), specifying details for the client:     <client>       <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                 behaviorConfiguration="SharedSecret"                 binding="netTcpRelayBinding"                 contract="FormatService.IFormatService" />     </client>     <behaviors>       <endpointBehaviors>         <behavior name="SharedSecret">           <transportClientEndpointBehavior credentialType="SharedSecret">             <clientCredentials>               <sharedSecret issuerName="fullTrustConsumer"                             issuerSecret="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/>             </clientCredentials>           </transportClientEndpointBehavior>         </behavior>       </endpointBehaviors>     </behaviors>   The proxy is straight WCF territory, and the same client can run against Azure Service Bus through any relay binding, or directly to the local network service using any WCF binding - the contract is exactly the same. The code is simple, standard WCF stuff: using (var client = new FormatService.FormatServiceClient()) { outputString = client.ReverseString(inputString); } Running the sample First, update Solution Items\AzureConnectionDetails.xml with your service bus namespace, and your service identity credentials for the netTcpClient and the provider:   <!-- ACS credentials for the full trust consumer (Part2): -->   <netTcpClient identityName="fullTrustConsumer"                 symmetricKey="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/> Then rebuild the solution and verify the unit tests work. If they’re green, your service is listening through Azure. Check out the client by navigating to http://localhost:53835/Sixeyed.Ipasbr.NetTcpClient. Enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

  Read the article

• WebLogic JDBC Use of Oracle Wallet for SSL

  - by Steve Felts

  Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

  Read the article

• yum not working on EC2 Red Hat instance: Cannot retrieve repository metadata

  - by adev3

  For some reason yum has stopped working in my Amazon EC2 instance, located in the EU West sector. There seems to be something wrong with the path of the repo metadata, is this correct? I would be very grateful for any help, as my experience in this field is somewhat limited. Thank you very much. cat /etc/redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) yum repolist: Loaded plugins: amazon-id, rhui-lb, security https://rhui2-cds01.eu-west-1.aws.ce.redhat.com/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. https://rhui2-cds02.eu-west-1.aws.ce.redhat.com/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. repo id repo name status rhui-eu-west-1-client-config-server-6 Red Hat Update Infrastructure 2.0 Client Configuration Server 6 0 rhui-eu-west-1-rhel-server-releases Red Hat Enterprise Linux Server 6 (RPMs) 0 rhui-eu-west-1-rhel-server-releases-optional Red Hat Enterprise Linux Server 6 Optional (RPMs) 0 repolist: 0 yum update: (I needed to remove the base URLs below because of ServerFault's restrictions for new users) Loaded plugins: amazon-id, rhui-lb, security [same as base url 1 above]/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. [same as base url 2 above]/pulp/repos//rhui-client-config/rhel/server/6/x86_64/os/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 401" Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: rhui-eu-west-1-client-config-server-6. Please verify its path and try again

  Read the article

• Cant connect to mysql using self signed SSL certificate

  - by carpii

  After creating a self-signed SSL certificate, I have configured my remote mysqld to use them (and ssl is enabled) I ssh into my remote server, and try connecting to its own mysqld using ssl (mysql server is 5.5.25).. ~> mysql -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key --ssl-ca=ca.cert Enter password: ERROR 2026 (HY000): SSL connection error: error:00000001:lib(0):func(0):reason(1) Ok, I remember reading theres some problem with connecting to the same server via SSL. So I download the client keys down to my local box, and test from there... ~> mysql -h <server> -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key --ssl-ca=ca.cert Enter password: ERROR 2026 (HY000): SSL connection error Its unclear what this "SSL connection error" error refers to, but if I omit the -ssl-ca, then I am able to connect using SSL.. ~> mysql -h <server> -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 37 Server version: 5.5.25 MySQL Community Server (GPL) However, I believe that this is only encrypting the connection, and not actually verifying the validity of the cert (meaning I would be potentially vulnerable to man-in-middle attack) The ssl certs are valid (albeit self signed), and do not have a passphrase on them So my question is, what am I doing wrong? How can I connect via SSL, using a self signed certificate? MySQL Server version is 5.5.25 and the server and clients are Centos 5 Thanks for any advice Edit: Note that in all cases, the command is being issued from the same directory where the ssl keys reside (hence no absolute path)

  Read the article

• Active and Passive Federation in WIF

  - by user102533

  I am trying to understand the difference between Active and Passive federation in WIF. It appears that one would use an Active Federation if the Relying Party (RP) is a WCF Service instead of an ASP.NET application and a Passive Federation if the RP is an ASP.NET application. Is this accurate? So, in a scenario in which an ASP.NET application uses a WCF in the backend, the MS articles suggest using a 'bootstrap' security token that is obtained by the ASP.NET app using an ActAs STS and this token is used to authenticate with the WCF. In this scenario, it appears that we are doing a combination of Active (user - STS - ASP.NET RP) and Passive (ASP.NET - ActAs STS - WCF) Federation?

  Read the article

• How to include an external jar in gwt client side?

  - by Sergio del Amo

  I would like to use the org.apache.commons.validator.GenericValidator class in a view class of my GWT web app. I have read that I have to implicitely tell that I intend to use this external library. I thought adding the next line into my App.gwt.xml would work. <inherits name='org.apache.commons.validator.GenericValidator'/> I get the next error: Loading inherited module 'org.apache.commons.validator.GenericValidator' [ERROR] Unable to find 'org/apache/commons/validator/GenericValidator.gwt.xml' on your classpath; could be a typo, or maybe you forgot to include a classpath entry for source? [ERROR] Line 13: Unexpected exception while processing element 'inherits' com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:239) at com.google.gwt.dev.cfg.ModuleDefSchema$BodySchema.__inherits_begin(ModuleDefSchema.java:354) at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.util.xml.HandlerMethod.invokeBegin(HandlerMethod.java:223) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.startElement(ReflectiveParser.java:270) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:327) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) [ERROR] Failure while parsing XML com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.util.xml.DefaultSchema.onHandlerException(DefaultSchema.java:56) at com.google.gwt.dev.util.xml.Schema.onHandlerException(Schema.java:66) at com.google.gwt.dev.util.xml.Schema.onHandlerException(Schema.java:66) at com.google.gwt.dev.util.xml.HandlerMethod.invokeBegin(HandlerMethod.java:233) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.startElement(ReflectiveParser.java:270) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:179) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1339) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2747) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:327) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) [ERROR] Unexpected error while processing XML com.google.gwt.core.ext.UnableToCompleteException: (see previous log entries) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.parse(ReflectiveParser.java:351) at com.google.gwt.dev.util.xml.ReflectiveParser$Impl.access$100(ReflectiveParser.java:48) at com.google.gwt.dev.util.xml.ReflectiveParser.parse(ReflectiveParser.java:398) at com.google.gwt.dev.cfg.ModuleDefLoader.nestedLoad(ModuleDefLoader.java:257) at com.google.gwt.dev.cfg.ModuleDefLoader$1.load(ModuleDefLoader.java:169) at com.google.gwt.dev.cfg.ModuleDefLoader.doLoadModule(ModuleDefLoader.java:283) at com.google.gwt.dev.cfg.ModuleDefLoader.loadFromClassPath(ModuleDefLoader.java:141) at com.google.gwt.dev.Compiler.run(Compiler.java:184) at com.google.gwt.dev.Compiler$1.run(Compiler.java:152) at com.google.gwt.dev.CompileTaskRunner.doRun(CompileTaskRunner.java:87) at com.google.gwt.dev.CompileTaskRunner.runWithAppropriateLogger(CompileTaskRunner.java:81) at com.google.gwt.dev.Compiler.main(Compiler.java:159) Anyone knows how it works?

  Read the article

• Android- Using DexClassLoader to load apk file.

  - by Craig O Connor

  Hi guys, I've hit a bit of a wall. Any help would be appreciated. I have an app that I want to use DexClassLoader to load another apk file. Here is my code: DexClassLoader dLoader = new DexClassLoader("/sdcard/download/test.apk","/sdcard/download",null,ClassLoader.getSystemClassLoader().getParent()); Class calledClass = dLoader.loadClass("com.test.classname"); Intent it=new Intent(this, calledClass); it.setClassName("com.test", "com.test.classname"); startActivity(it); Now I had already installed test.apk so when I ran the above code it worked fine and launched the application. However I want to be able to run this without test.apk being installed already (as that would defeat the entire point of the application) . So I uninstalled it and when I ran the my app again I get this error: android.content.ActivityNotFoundException: Unable to find explicit activity class {com.test/com.test.classname}; have you declared this activity in your AndroidManifest.xml. So I'm a bit stumped here. This activity is declared in the Manifest of the apk I am trying to run. I can't declare it in my applications Manifest. Any ideas? Thanks, Craig

  Read the article

• How to resolve Windows Update Error 8024402F on Windows 7 Home Premium 64bit?

  - by Day

  I have been having the same problem with Windows Updates on 2 of my machines at home, both running Windows 7 Home Premium 64-bit. One of the 2 machines is a brand new install, the other has run Windows Update in the past, but is also not working now. When I manually check for updates using the Control Panel, I get error code 8024402F: I followed the link to "Get help with this error", which brings up several articles in Windows Help and Support, none of which are for this specific error code. From the help and general googling I've tried: Checking internet connectivity. Most of the help suggests that this error is caused by a general internet connectivity problem. But if you're reading this, my connection is definitely working fine. Disabling antivirus temporarily and trying to run Windows Update. This didn't help (I run AVG free) Running Control Panel - Troubleshooting - Security Systems - Fix Problems with Windows Update. This said it detected and resolved problems, but didn't help. Update using IE (as I used to in XP). Go to http://windowsupdate.microsoft.com/ redirects me to http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx for which IE displays a "connection problem" (i.e. site unreachable) I've had the same problem for 24 hours now, so surely the Windows Update servers haven't been down this whole time? A quick check on twitter shows no worldwide outcry about Windows Update being unavailable, so is it just me? I'm based in the UK, but I notice that the http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx URL is also unavailable using ''wget'' from my webserver in Chicago. day@ord1:~$ wget http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx --2011-03-17 00:01:27-- http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx Resolving test.update.microsoft.com... failed: Name or service not known. wget: unable to resolve host address `test.update.microsoft.com' day@ord1:~$ host test.update.microsoft.com Host test.update.microsoft.com not found: 3(NXDOMAIN)

  Read the article

• Perl CGI that sends a temporary loading page to client then later sends the actual results page

  - by Kurt W. Leucht

  I've wasted at least a half day of my company's time searching the Internet for an answer and I'm getting wrapped around the axle here. I can't figure out the difference between all the different technology choices (long polling, ajax streaming, comet, XMPP, etc.) and I can't get a simple hello world example working on my PC. I am running Apache 2.2 and ActivePerl 5.10.0. JavaScript is completely acceptable for this solution. All I want to do is write a simple Perl CGI script that when accessed, it immediately returns some HTML that tells the user to wait or maybe sends an animated GIF. Then without any user intervention (no mouse clicks or anything) I want the CGI script to at some time later replace the wait message or the animated GIF with the actual HTML results from their query. I know this is simple stuff and websites do it all the time, but I can't find a single working example that I can cut and paste onto my machine that will work. Here is my simple Hello World example that I've compiled from various Internet sources, but it doesn't seem to work. When I refresh this CGI URL in my web browser it prints nothing for 5 seconds, then it prints the PLEASE BE PATIENT web page, but not the results web page. What am I doing wrong? #!C:\Perl\bin\perl.exe use CGI; use CGI::Carp qw/fatalsToBrowser warningsToBrowser/; sub Create_HTML { my $html = <<EOHTML; <html> <head> <meta http-equiv="pragma" content="no-cache" /> <meta http-equiv="expires" content="-1" /> <script type="text/javascript" > var xmlhttp=false; /*@cc_on @*/ /*@if (@_jscript_version >= 5) // JScript gives us Conditional compilation, we can cope with old IE versions. // and security blocked creation of the objects. try { xmlhttp = new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { try { xmlhttp = new ActiveXObject("Microsoft.XMLHTTP"); } catch (E) { xmlhttp = false; } } @end @*/ if (!xmlhttp && typeof XMLHttpRequest!='undefined') { try { xmlhttp = new XMLHttpRequest(); } catch (e) { xmlhttp=false; } } if (!xmlhttp && window.createRequest) { try { xmlhttp = window.createRequest(); } catch (e) { xmlhttp=false; } } </script> <title>Ajax Streaming Connection Demo</title> </head> <body> Some header text. <p> <div id="response">PLEASE BE PATIENT</div> <p> Some footer text. </body> </html> EOHTML return $html; } my $cgi = new CGI; print $cgi->header; print Create_HTML(); sleep(5); print "<script type=\"text/javascript\">\n"; print "\$('response').innerHTML = 'Here are your results!';\n"; print "</script>\n";

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >