Search Results

Search found 10602 results on 425 pages for 'media queries'.

Page 332/425 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

  • Nginx with http/https - Http seemed redirected to https all the time

    - by dwarfy
    I've this really weird behaviour with my ubuntu 10.04 / nginx 1.2.3 server. Basically I changed the SSL certificates this morning. And ever since it has been behaving weirdly on all apps. Godaddy is reporting that HTTPS/SSL setup is correct. When I try a page it still works correctly when I'm using HTTPS. But when I try using HTTP nginx reports error : 400 Bad Request The plain HTTP request was sent to HTTPS port After looking around on google for hours, I've tried different setup (while originaly my setup was working correctly for longtime, I just renewed certificates) I kindof found a half solution by adding this to my config : error_page 497 $request_uri; The realllly weird thing is that when I use this setup : server { listen 80; server_name john.johnrocks.eu; access_log /home/john/envs/john_prod/nginx_access.log; error_log /home/john/envs/john_prod/nginx_error.log; location / { uwsgi_pass unix:///home/john/envs/john_prod/john.sock; include uwsgi_params; } location /media { alias /home/john/envs/john_prod/johntab/www; } location /adminmedia { alias /home/john/envs/john_prod/johntab/www/adminmedia; } } I still have the same error when using HTTP (while nothing is setup for HTTPS here)?? I'm getting crazy on this !

    Read the article

  • Windows 7 x64 wired connection problem. IP, gateway, dns assigned, can't ping. Network detected as "Network"

    - by Emil Lerch
    I am having a problem connecting to a specific wired network with my Latitude E6410 laptop. Other wired networks seem to work fine, but this one does not. I have a coworker with me with the same Intel 82577LM Gigabit Network card, and he can connect just fine. I've updated to the latest Intel drivers (11.8.75.0) and am not using Pro Set. I obtain all DHCP information just fine (IP, netmask, DNS server, default gateway). I cannot ping anything (internal or on the Internet - I tried pinging Google's public DNS servers by IP 8.8.8.8), nor can I get answers to any DNS queries through NS Lookup. Windows troubleshooting says everything is fine, but I can't get DNS responses. I've seen issues like this in the past that were related to link speed/duplex autonegotiaion failures, so I've tried manually setting link speed/duplex to all values one by one with no success. My coworker is using all default settings, so he is just using autonegotiate. Any ideas of other things to try?

    Read the article

  • Abnormally high amount of Transmit discards reported by Solarwinds for multiple switches

    - by Jared
    I have several 3750X Cisco switches that, according to our Solarwinds NPM, are producing billions of transmit discards per day. I'm not sure why it's reporting these discards. Many of the ports on the 3750X's have 2960's connected to them and are hardcoded as trunk ports. Solarwinds NPM version 10.3 Cisco IOS version 12.2(58)SE2 Total output drops: 29139431: GigabitEthernet1/0/43 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is XXXX (bia XXXX) Description: XXXX MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:47, output 00:00:50, output hang never Last clearing of "show interface" counters 1w4d Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 29139431 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 35000 bits/sec, 56 packets/sec 51376 packets input, 9967594 bytes, 0 no buffer Received 51376 broadcasts (51376 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 51376 multicast, 0 pause input 0 input packets with dribble condition detected 115672302 packets output, 8673778028 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out sh controllers gigabitEthernet 1/0/43 utilization: Receive Bandwidth Percentage Utilization : 0 Transmit Bandwidth Percentage Utilization : 0

    Read the article

  • CentOS 6.0 yum audacity dependency

    - by Kaemic
    I'm trying to install audacity on centos using yum and I cant force yum to resolve all dependencies, here's what i got, can someone help me with it (when I download the rpm file and click-installit i get the dependency problem too): # yum --disablerepo=c6-media install audacity-1.2.3-2.2.el4.rf.i386.rpm Loaded plugins: fastestmirror, refresh-packagekit Loading mirror speeds from cached hostfile * base: mirror.karneval.cz * centosplus: mirror.karneval.cz * extras: centos.vieth-server.de * rpmforge: fr2.rpmfind.net * updates: mirror.karneval.cz Setting up Install Process Examining audacity-1.2.3-2.2.el4.rf.i386.rpm: audacity-1.2.3-2.2.el4.rf.i386 Marking audacity-1.2.3-2.2.el4.rf.i386.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package audacity.i386 0:1.2.3-2.2.el4.rf set to be updated --> Processing Dependency: wxGTK >= 2.4.0 for package: audacity-1.2.3-2.2.el4.rf.i386 --> Processing Dependency: libwx_gtk-2.4.so.0 for package: audacity-1.2.3-2.2.el4.rf.i386 --> Processing Dependency: libwx_gtk-2.4.so.0(WXGTK_2.4) for package: audacity-1.2.3-2.2.el4.rf.i386 --> Running transaction check ---> Package audacity.i386 0:1.2.3-2.2.el4.rf set to be updated --> Processing Dependency: libwx_gtk-2.4.so.0 for package: audacity-1.2.3-2.2.el4.rf.i386 --> Processing Dependency: libwx_gtk-2.4.so.0(WXGTK_2.4) for package: audacity-1.2.3-2.2.el4.rf.i386 ---> Package wxGTK.i686 0:2.8.12-1.el6.rf set to be updated --> Finished Dependency Resolution Error: Package: audacity-1.2.3-2.2.el4.rf.i386 (/audacity-1.2.3-2.2.el4.rf.i386) Requires: libwx_gtk-2.4.so.0 Error: Package: audacity-1.2.3-2.2.el4.rf.i386 (/audacity-1.2.3-2.2.el4.rf.i386) Requires: libwx_gtk-2.4.so.0(WXGTK_2.4) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest

    Read the article

  • Automated Scanning for Corrupted Archive Files

    - by Synetech inc.
    Hi, I have all kinds of files that I have downloaded from everywhere over the years scattered around my hard drives. I’m in the process of trying to organize them all and have run into a problem. Sometimes a file was not downloaded correctly (this was a big issue when Chromium first came out) and is thus corrupt. For media files, this is relatively simple to determine (it requires actually opening and examining the file). For executables or other binaries, it is relatively difficult (executables may or may not crash, other binaries could be completely unknown). Archive files (eg zip, rar, 7z, exe, ace, etc.) however should be pretty simple, they have a built-in corruption detection facility. My problem now is that I really don’t want to open and test each and every single archived file throughout my drive; that would be a nightmare. I’m looking for a utility that can automate the process. Is there a program that can scan archive files on a drive and list the ones that are corrupt? Thanks a lot.

    Read the article

  • I/O Error on LG GSA-H12N DVD drive on Windows 7

    - by Ashwin
    I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

    Read the article

  • Very slow browsing shared folder XP client/host

    - by Ickster
    I have a pretty straightforward setup where I'm storing media files on an XP pro machine, and sharing the folder to be accessed by other XP pro machines around the house. (Typically, there's only one client accessing the share at a time, although there may be several with the share mounted.) It's been working just fine for years, but I've recently started having some problems. A couple of days ago, the host PC had power disconnected while it was running. It was restarted and everything seemed fine initially, but since then browsing the shared folder from client machines has been extremely slow and actually reading data is all but impossible. The problem exists in every access method I've tried: Windows Explorer, VLC dialogs, command line, etc. My first thought was that the disk was experiencing problems, but there are no problems viewing the files locally on the host machine. My second thought was that there was a network problem on the host machine, so I removed and reinstalled drivers for the NIC with no change. My third thought was that there might've been a problem elsewhere on the network, so I swapped out hardware to no avail. I'm regrouping and trying to come up with a methodical approach to figuring out what might be wrong. I would of course be thrilled if you can suggest specific problems (Microsoft KB articles, etc.) that I might check, but I'm not expecting a silver bullet. If you can help me outline an approach to identify the problem (including recommended tools, e.g., disk checkers, network analyzers, etc.) I'd greatly appreciate it.

    Read the article

  • What is the point of PPPoE?

    - by aaa90210
    I am trying to expand my knowledge of networking beyond the basics. I have started reading about PPP, and how it is used in DSL modems with PPPoE and PPPoA. My first impression of PPP was "well that seems pretty similar to Ethernet". They are both data link layer protocols. They both have fields to identify the encapsulated protocol (e.g. IP). They both have related protocols to assign IP addresses (DHCP and NCP). So my first question was "so what's the point of PPP, why not just use Ethernet?". The answer to that was fairly straightforward - Ethernet is not supported over a wide range of media like serial lines, and is a fairly specific technology to LAN's using CAT5 or similar. HOWEVER - then I was reading about PPPoE, and the obvious thought was "well if we are doing something over Ethernet, then Ethernet must be available and in use, so why not just use it?". In other words, PPPoE seems to be encapsulating one data-link layer protocol in another very similar protocol. Why do IP-inside-PPP-inside-Ethernet when we could just be doing IP-inside-Ethernet, and use DHCP rather than NCP to assign the IP address to the home router? Thanks

    Read the article

  • What Wireless Router/ADSL Modem to get? N-band a must!!

    - by JJarava
    I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

    Read the article

  • Apache is spawning more and more processes!!

    - by erotsppa
    We have a LAMP setup that is working prety good for half a year. All of a sudden today the apache server (mysql servers are not on this box) started to die. It seems to have started to spawn more and more processes over time. Eventually it will consume all the memory and the server would just die. We are using prefork. In the mean time what we are doing is just added more ram and increased the MaxClients and ServerLimit parameter to 512. We're just prolonging the crash. The number still goes up slowly. Maybe in a day, it would reach that limit. What is going on? We only have around 15-20 request per second. We have 1Gb memory and it's not half used, there's no swapping going on. Why is apache creating more and more processes? It's almost like theres a leak somewhere! The database boxes are fine, they are not causing a delay to requests. We tested some queries everything is quick!

    Read the article

  • How can I fix video tearing and pausing on Windows XP Flash videos?

    - by xvs
    I have what should be a reasonably fast PC: it's a Quadcore Intel 6600 at 2.4 GHz, 4MB of RAM, an ATI 3800 series video card and an LG L246WP monitor, which I selected particularly because it was supposed to work well with video and have no trails or other artifacts. So I should be able to play video with no problems. And I can, as long as that video isn't Flash video. With Flash, what I see is tearing, especially during pans, and pausing -- every few seconds the video pauses for about 300ms while the sound stays continuous. I tried going into the video card setup and changing vertical sync, pulldown detection, windows media video acceleration, deinterlacing and triple buffering. but no combination of settings I've tried has changed or corrected the problem in any way. I've also tried enabling and disabling hardware acceleration in the Flash settings, to no avail. This problem happens whether or not the video is streaming or has fully streamed in before playing. So, what can I do? Is this just a flash issue or is there a way to get it to work?

    Read the article

  • How to set up the jdbc driver to connect to hsqldb from libreoffice?

    - by rumtscho
    I am trying to "split" a LibreOffice .odb file into a HSQL database and an OpenOffice document containing forms and macros. I am trying to follow the instructions from this thread: Within a few minutes you can convert your embedded HSQLDB to a stand-alone HSQLDB which is just a very fine database engine. 1) Download and extract the current version from http://hsqldb.org/ and point the Java class path in ToolsOptionsJava to the new hsqldb.jar 2) Extract the database folder from your embedded database and rename the files data, properties, script to name.data name.properties, name.script where "name." is an arbitrary name prefix. 3) Connect a Base document to an existing JDBC database such as jdbc:hsqldb:file:/home/chenier/hsqldb/name;default_schema=true;shutdown=true;hsqldb.default_table_type=cached;get_column_name=false (again, "name" refers to your own file name prefix). This local single-user connection gives you much more than the embedded HSQLDB. 4) Copy queries, forms and reports from the old database over to the new one. The wizard presents me with a window expecting two inputs: a "Datasource URL" and a "JDBC driver class". As far as I can tell, the tutorial above only tells me what to put into the Datasource URL. As for the JDBC driver class, I have no idea what to write into this field. I tried the fully-qualified name of the Java class, org.hsqldb.jdbc.JDBCDriver as given in the HSQLDB documentation. When that failed, I tried the physical path /var/lib/hsqldb/lib/hsqldb.jar (although that should have been unnecessary, because first I pointed to this path as described under 1 and then restarted LibreOffice). In both cases, "Test class" failed with the message "The JDBC driver could not be loaded". OpenOffice's documentation doesn't say anything sensible about the field, it was something like "enter the JDBC driver in this box". Any ideas what I should enter there to get the connection working?

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • Why can't I boot in to Windows Recovery Environment to fix my HDD or salvage my data?

    - by Kevin
    I've been trying to get in to WindowsRE to salvage the files on my Sony Vaio laptop after it failed to load Vista (it finally, consistently displays "Error loading operating system" after months of such intermittent failures, usually rectified via restarts or utilizing Startup Repair or CHKDSK from WindowsRE) . The problem is, after successfully accessing it once after this failure (and many times before over the course of the laptop's life), I can no longer get it to load. During the last successful access (right after the failure), I ran startup repair, which itself failed and notified me that the boot sector was corrupt. I attempted to head in to Sony's proprietary recovery tools menu, which is accessible from WindowsRE when it is loaded from the recovery partition or recovery disk, however it hung. I have since been unable to access the recovery environment after restarting, using any of these methods: Access via the recovery partition (pressing F10 on boot) Access via recovery DVD (created using the same computer when it was healthy) Access via a Windows Vista installation DVD All three methods produce the same results: The computer acknowledges the boot attempt The computer successfully gets passed the "Windows is loading files" screen The computer successfully gets passed the Windows loading screen The computer then stalls at a black screen, while showing HDD activity (via indicator light). After a few minutes, the HDD activity ceases, and after a few more minutes, the over sized cursor that is utilized in WindowsRE appears on the black screen. The actual recovery environment, however, never appears, even after leaving the computer in such a state overnight. What is fustrating is that other bootable utilities, such as SeaTools for DOS and MemTest, boot up and run fine. In running perfectly normally, MemTest was able to produce a plethora of errors utilizing my RAM. I'm inclined to believe the RAM's faultiness may causing the WindowsRE booting to fail. Would this be a valid assumption? If I'm not mistaken, booting from external media utilizes the RAM, so such a reason is plausible, assuming my knowledge of bootloading is correct. Other than that, I can't figure out any reason why all the bootable utilities except WindowsRE run fine. Does anyone know what the problem is, or could be? Any solutions?

    Read the article

  • can't backup to a NAS drive as offline schedule task

    - by imageng
    I have seen this problem issue discussed in several forums including this one, but could not find a solution. On MS server 2003 I configured a Backup task, the target backup is on a NAS disc (Seagate BlackArmor NAS 110). The backup task is working well as a scheduled task or by a direct command, when I am logged on. It is not working when the user is offline (in this case - Administrator). I already tried the following actions: 1) addressing to the target as network drive (Y:location..), 2)Using UNC instead, 3) making the drive a domain member (the NAS admin S/W allows to define itself as a domain member) The result log message for 1 and 2 is: "The operation was not performed because the specified media cannot be found." The result log message for 3 is empty file. The schedule task "RUN" command is: C:\WINDOWS\system32\ntbackup.exe backup "@C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\Windows NT\NTBackup\data\de-board.bks" /a /d "Set created 2/14/2010 at 5:10 PM" /v:yes /r:no /rs:no /hc:off /m incremental /j "de-board" /l:s /f "\10.0.0.8\public\Backups\IBMServer\de-board.bkf" 10.0.0.8 is the static IP of the NAS. "Run only if logged on" is NOT marked. Password of the administrator user is set. It is obvious that there is no access to the NAS when the user is logged-out. Do you have any idea how can I solve it? Thanks

    Read the article

  • 5GHz vs 2.4GHz dual band router, max mbps

    - by Tallboy
    I've done a fair amount of reading before posting this but there are a few things still unclear. I just bought a Netgear WNDR3700 N600. I understand that 5GHz offers more channels, less interference because of more available channels, wont interfere with a microwave and so on, and also has a shorter range. Currently, my router is broadcasting both signals (for my iPhone on 2.4, and my computer on 5) But my question is What is the max speed of 5GHz in mbps? In the router settings, it allows me to set '300mbps', but I keep reading online that the max is 54. Is this true? I noticed when I set up the router the default for 2.4 was set to 300 and the default for 5 was set to 54, so I changed both to 300. Is this fine as well? I don't see why it wouldn't be maxed out for both by default. On the box it says max rate of 300+300 so I assume this is correct, but it's throttled down so the router isn't stressing in case you have something streaming media 24/7 and slowing the internet down too. What is the max range of 5GHz? my apt is 780 square feet, and the router is in the main living room.

    Read the article

  • Cisco ASA with CSC module bypassing

    - by Shial
    We recently upgraded from a Watchguard X5500e Peak firewall appliance to a Cisco 5500 ASA with the CSC module. The ASA is running the 8.2 software and the CSC is on the 6.3.1172 software. We've finally gotten everything stabilized after a few weeks of pulling hairs and gnashing of teeth and now its down to trying to setup a few items that were lower on the priority list. With the watchguard we were able to go with the browser to an internal webpage and authenticate against the firewall to allow us to bypass the filters. Useful when a classroom here needs access to streaming media or an executive needs us to download a video. I'm trying to setup something similar but I'm fairly inexperienced with the Cisco devices like this ASA so I'm not sure if its treated as a VPN connection or some kind of ACL. Ideally we would want to setup more than one to limit exposure rather than one thats wide open when used. I did a search and couldn't find anything related to thing in the other questions asked here and I have had no luck googgling it either.

    Read the article

  • Is it possible/practical to install and run Linux on a USB flash drive?

    - by Graeme Donaldson
    I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

    Read the article

  • Windows PE network setup

    - by microchasm
    I'm walking through the following step-by-step guide for deploying Windows 7 via AIK: http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx On step 4 (Capturing the Installation onto a Network Share), I run into a bit of a snag: attempting to connect to a network drive repeatedly fails. I'm using/deploying Dell Optiplex 380 64 bit machines, and the network cards seem to be really wonky. On the machine that I'm using to run AIK etc, the network driver wasn't found automatically. I had to manually go in and install the driver (which was found on the OEM installation media). I've since copied this to the USB key that I'm using for the Autounattend.xml so its handy. I think that because of this, the PE environment doesn't or can't instantiate the network device. Is there a way to install/configure the network device through the command prompt in PE? If not, I read about adding in the answer file path(s) to drivers, but if I did it this way, would I have to start the process all over again (i.e. create new Autounattend.xml with the PnPcustomizations path included, re-run the installation on the reference machine, install all the applications, re-make the PE iso, reboot into new PE iso)? Any shortcuts, direction, or advice would be appreciated. Thanks!

    Read the article

  • Why do my backup fail when I target a network share hosted by a Synology DS211 disk station?

    - by Larry
    My backups are failing when I try to use a network share hosted by a Synology DS211 disk station. They work fine if I target a different network share (i.e. \server1\data\larry). When I run the following command: Wbadmin start backup -backupTarget:\\diskstation\backup-larry -include:C: This is what I get: wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Note: The backed up data cannot be securely protected at this destination. Backups stored on a remote shared folder might be accessible by other people on the network. You should only save your backups to a location where you trust the other users who have access to the location or on a network that has additional security precautions in place. Retrieving volume information... This will back up volume WIN7(C:) to \\diskstation\backup-larry. Do you want to start the backup operation? [Y] Yes [N] No y Note: The list of volumes included for backup does not include all the volumes that contain operating system components. This backup cannot be used to perform a system recovery. However, you can recover other items if the destination media type supports it. The backup operation to \\diskstation\backup-larry is starting. Creating a shadow copy of the volumes specified for backup... Creating a shadow copy of the volumes specified for backup... The backup operation stopped before completing. Summary of the backup operation: ------------------ The backup operation stopped before completing. Detailed error: Access is denied. Windows Backup failed to write the file: '<backup location>\WindowsImageBackup\<Computer Name>\MediaId'. Access is denied. The backup creates the following path \\diskstation\backup-larry\WindowsImageBackup\LARRY-MYDOMAIN\ but its empty. I definitely have read/write access on the target directory (\diskstation\backup-larry). I have verified this by looking at the permission and by actually copying files to this location. Any suggestions?

    Read the article

  • Nginx proxy hangs when proxiing to itself

    - by Thomas
    I have Nginx running as a proxy for a number of services including a Geoserver running on port 8080 with the following config: location ^~ /wms/ { rewrite ^/wms/(.*)$ /geoserver/ows$1 break; proxy_pass http://127.0.0.1:8080; proxy_connect_timeout 60s; proxy_read_timeout 150s; } and a proxy service to avoid SOP problems which works as follows: location ^~ /proxy/?targetURL= { rewrite ^/proxy/?targetURL=(.*)$ $1 break; proxy_pass $1; proxy_connect_timeout 60s; proxy_read_timeout 150s; } My web server is also under the same domain, ran by a jetty on port 8888, handled by the same proxy. location / { proxy_pass http://127.0.0.1:8888; proxy_connect_timeout 60s; proxy_read_timeout 150s; } From my web application I make WMS server calls for data via my proxy service. It works fine for external servers but it hangs when I call my own internal geoserver. My geoserver proxy works fine, I can make WMS service queries with the said URL. The call that hangs is basically: http://mywebappdomain.com/proxy/?targetURL=http://mywebappdomain.com/wms/?my_set_of_parameters Which means that the proxy rule applies and the WMS service is called from the same server. Is there an issue with proxying over itself?

    Read the article

  • Rebuild Fedora 19 ISO adding Kickstart for USB install

    - by dooffas
    I am attempting to edit a Fedora 19 DVD ISO to add a kickstart file. I then need this ISO burnt to a USB stick for instillation. The error I get when booting is Warning: Could not boot. Warning: /dev/root does not exist To try and determine which part of the process is failing I have broken the process down in to separate stages. Step 1: Burn the original ISO "Fedora-19-x86_64-DVD.iso" (Available - here) to a pendrive and see if that will install. dd if=/path/to/iso of=/dev/sdc Burning this image was successful and it installed without issue. Step 2: Exctract the ISO, repackage it and burn it to a pendrive and see if that will install. PLEASE NOTE: The final command in this section has been broken down in to multiple lines for ease of reading, in fact it was run as a single command on one line. mkdir -p /mnt/linux mount -o loop /tmp/linux-install.iso /mnt/linux cd /mnt/ tar -cvf - linux | (cd /var/tmp/ && tar -xf - ) cd /var/tmp/linux xorriso -as mkisofs -R -J -V "NewFedoraImage" -o ouput/file.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -isohybrid-mbr /usr/share/syslinux/isohdpfx.bin . This iso was then burnt to a pendrive as before. dd if=/path/to/iso of=/dev/sdc This ISO burnt to the pen drive with no problem and will boot. I then see the fedora options screen. After choosing either "Install Fedora 19" or "Test this media & install Fedora 19" I then receive the errors highlighted above. This means the kickstart file is not to blame, but repackaging the ISO. Is there something I am missing in the repackaging process? Any input would be great! NOTE: If it is of any help, I attempted Step 2 with an Ubuntu server ISO and the process was successful.

    Read the article

  • How to recover the plesk database?

    - by Kau-Boy
    When I try to launch the Plesk administration page of you server I get the following error: ERROR: PleskMainDBException MySQL query failed: MySQL server has gone away The MySQL Server is working well. Although it seems that the plesk database is somehow corrupt and any action on this database results in a restart of the mysql process, so even queries to other databases on the same MySQL server will be lost. If I try to connect to the plesk database using phpMyAdmin, I can only see the number of tables, the database had originally. But I am not able to open the tables listing. As soon as I try it, the mysql process crashes again. Trying to connect to the database using ssh works. I can even run a SELECT statement against any table an get a result. I don't know if it is an plesk error or an error of the psa database or even the MySQL server. Can you give me any tips on how to recover the plesk system. Should I try to repair the Plesk installation before. And if so, how can I do it and will all my settings get lost doing it? EDIT: Trying to dump the database, I get the following error: mysqldump: Got error: 2013: Lost connection to MySQL server during query when using LOCK TABLES

    Read the article

  • Distributed File Systems.

    - by GruffTech
    So, I've been reading several articles around ServerFault as well as google. (For Example, this link) My Requirements are very similar to the link above, however i'd like to also have dynamic or at least resizeable file volumes, so if necessary i can add 4-5 servers to the pool, and then expand the volume. Any Distributed File systems that support that, to save me some time? Thanks! LustreFS will be my next test cluster to build. GlusterFS I've build a 3-machine test GlusterFS cluster, However i quickly became aware of several of its limitations that it doesn't seem to make clearly public. One, i can't seem to resize a volume. Once a volume is created, its done. Which seems retarded, why have a fully scalable file system if i can't scale a volume? So maybe i'm doing something wrong. I'm not sure. AmazonS3 while gives the cheapest startup adds too much cost when broken down to per client per month, so its out. Building my own system when prorated over several years with no bandwidth costs makes it significantly cheaper. MogileFS isn't an option as we'd like this server to be a SAN-Replacement, for storing tons of media from a multitude of systems, which for us means it needs to be POSIX compliant so it can be remotely mounted via NFS or CIFS.

    Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >