Search Results

Search found 128321 results on 5133 pages for 'windows server 2012 r2'.

Page 334/5133 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

  • "Server Unavailable" and removed permissions on .NET sites after Windows Update [closed]

    - by andrewcameron
    Our company has five almost identical Windows 2003 servers with the same host, and all but one performed an automatic Windows Update last night without issue. The one that had problems, of course, was the one which hosts the majority of our sites. What the update appeared to do was cause the NETWORK user to stop having access to the .NET Framework 2.0 files, as the event log was complaining about not being able to open System.Web. This resulted in every .NET site on the server returning "Server Unavailable" as the App Domains failed to be initialise. I ran aspnet_regiis which didn't appear to fix the problem, so I ran FileMon which revealed that nobody but the Administrators group had access to any files in any of the website folders! After resetting the permissions, things appear to be fine. I was wondering if anyone had an idea of what could have caused this to go wrong? As I say, the four other servers updated without a problem. Are there any known issues involved with any of the following updates? My major suspect at the moment is the 3.5 update as all of the sites on the server are running in 3.5. Windows Server 2003 Update Rollup for ActiveX Killbits for Windows Server 2003 (KB960715) Windows Server 2003 Security Update for Internet Explorer 7 for Windows Server 2003 (KB960714) Windows Server 2003 Microsoft .NET Framework 3.5 Family Update (KB959209) x86 Windows Server 2003 Security Update for Windows Server 2003 (KB958687) Thanks for any light you can shed on this.

    Read the article

  • MySQL unstable behavior with external stroge

    - by onurozcelik
    In our project we are using MySQL 5.0.90(InnoDB engine) server with an external storage. We store MySQL data files in an external storage. When the external storage down for a reason we have unstable behaviours. So we made some tests. In Windows Server 2008 We closed external storage physically. MySQL service stoped and we could not reach the server. Then we opened the storage unit and we could not start service until we reconfigured MySQL. We made storage unit offline from operating system. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online and we could start the service(not automatically). In Windows Server 2003 We made storage unit offline. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online we could not start the service until we reinstalled MySQL. Before reinstall we tried to reconfigure but it did not work. We closed external storage physically. MySQL service stoped and we could not reach the server. After that we opened the storage unit and we could start service(not automatically) We expect service to autostart after storage unit is online/open. But these tests show unstable behaviors. Is there any solutions to this.

    Read the article

  • Tools to manage sql 2008 database mirroring?

    - by lemkepf
    We are going to be moving about 20 databases that live on a single instance of sql 2000 to a sql 2008 r2 environment with database mirroring. What I'm looking for is a tool or scripts that will help me manage the conversion and management of those 20db's onto this new mirrored environment easily. There are many steps in setting each DB up and I want to automate as much as possible. Edit: Here are the steps I've been doing manually: Create the same username/passwords from the old sql 2000 server onto new sql 2008 server. Then sync those users/passwords onto the other sql 2008 server with the same SSID's so when we do the db backup and restore they match up. Take a backup of each sql 2000 db's. Copy them to server A. Restore the backup to server A. Backup from server a, copy to server b, restore there. Run the mirror "configure security" wizard. Start mirroring. I've love to be able to script this out or have a tool that does it for me. Thanks! Paul

    Read the article

  • Finding Bluetooth link key in Windows 7, to double pair a device on dualboot computer

    - by Ilari Kajaste
    How can I dig up the Bluetooth link key for a paired device in Windows 7? Is this something that is dependent on the Bluetooth stack I'm using (Toshiba), or is there a generic place to store these in Windows 7? Note: I'm not talking about the six-digit code usually typed by the user during pairing - that is worthless since it's discarded after pairing process. What I mean is the 128-bit link key that the devices exchange during pairing, and use thereafter to encrypt all their Bluetooth traffic. Background: I dualboot Windows 7 / Ubuntu on my laptop, and I would like to have my phone paired to both OS's. Since the dualbooting computer has only one Bluetooth adapter and thus only one Bluetooth address, I cannot do two pairings to the phone, since on the second pairing (Windows) the phone just replaces the previous pairing (Linux) to the same Bluetooth address. A thread on Ubuntu forums pointed me to what I have to do - pair first on Linux, then on Windows, and then replace the link key on Linux side with the one Windows negotiated. I can find the Linux side pairing key from /var/lib/Bluetooth/[BD_ADDR]/linkkeys - no problems there. However, on Windows side I can't find the key. According to the forum post, on Windows side the key should be in SYSTEM\ControlSet002\services\BTHPORT\Parameters\Keys\[BD_ADDR] but while that registry key does exist, it has no subkeys. (And a similar registry path in ControlSet001 didn't have any subkeys either.) One thing I've been instructed to do is to capture all events during pairing with Sysinternals Process Monitor. I did this, but I haven't been able to find any useful information from the captured events, not even by exporting the data to a huge XML and grepping that with the BD_ADDRs (with or without colons). So how could I find the link key for a paired device in Windows 7? Some reference information: Wikipedia: Bluetooth, Security Now: Bluetooth security

    Read the article

  • How to export SQL Server data from corrupted database (with disk write error)

    - by damitamit
    IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit Results of DBBC CheckDB: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 7928, Level 16, State 1, Line 1 The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. Msg 5030, Level 16, State 12, Line 1 The database could not be exclusively locked to perform the operation. Msg 7926, Level 16, State 1, Line 1 Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details. Msg 823, Level 24, State 3, Line 1 The operating system returned error 1(error not found) to SQL Server during a write at offset 0x00000674706000 in file 'G:\AX40_Dynamics_Live.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.

    Read the article

  • Windows preventing running of Telnet client

    - by palswim
    At first, I had issues because Windows 7 doesn't install the Telnet client by default (also, SuperUser has a thread). So, after installing it (and restarting, like Windows asked, though completely unnecessary), I opened a command prompt, and went to run my new Telnet program. I enter telnet, and receive: C:\Users\[USER]>telnet 'telnet' is not recognized as an internal or external command, operable program or batch file. "That's odd," I think to myself. So, in Windows explorer, I navigate to \Windows\System32 and see telnet.exe sitting in that folder. If I double-click on the executable file, the Telnet command prompt opens for me without a problem. So, I return to my Windows Command Prompt, and enter: C:\Users\[USER]>\Windows\System32\telnet.exe '\Windows\System32\telnet.exe' is not recognized as an internal or external command, operable program or batch file. And then (grep comes from cygwin): C:\Users\ryan\Desktop>dir \Windows\System32 | grep telnet Nothing. I've disabled UAC and have no idea why my Command Prompt is lying to me. Anyone experience something similar? To recap: In Windows 7, I have installed Telnet and can see it in my System32 folder, but cannot run it via a Command Prompt.

    Read the article

  • Running OpenMPI on Windows XP

    - by iamweird
    Hi there. I'm trying to build a simple cluster based on Windows XP. I compiled OpenMPI-1.4.2 successfully, and tools like mpicc and ompi_info work too, but I can't get my mpirun working properly. The only output I can see is Z:\orterun --hostfile z:\hosts.txt -np 2 hostname [host0:04728] Failed to initialize COM library. Error code = -2147417850 [host0:04728] [[8946,0],0] ORTE_ERROR_LOG: Error in file ..\..\openmpi-1.4.2 \orte\mca\ess\hnp\ess_hnp_module.c at line 218 -------------------------------------------------------------------------- It looks like orte_init failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during orte_init; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): orte_plm_init failed -- Returned value Error (-1) instead of ORTE_SUCCESS -------------------------------------------------------------------------- [host0:04728] [[8946,0],0] ORTE_ERROR_LOG: Error in file ..\..\openmpi-1.4.2 \orte\runtime\orte_init.c at line 132 -------------------------------------------------------------------------- It looks like orte_init failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during orte_init; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): orte_ess_set_name failed -- Returned value Error (-1) instead of ORTE_SUCCESS -------------------------------------------------------------------------- [host0:04728] [[8946,0],0] ORTE_ERROR_LOG: Error in file ..\..\..\..\openmpi -1.4.2\orte\tools\orterun\orterun.c at line 543 Where z:\hosts.txt appears as follows: host0 host1 Z: is a shared network drive available to both host0 and host1. What my problem is and how do I fix it? Upd: Ok, this problem seems to be fixed. It seems to me that WideCap driver and/or software components causes this error to appear. A "clean" machine runs local task successfully. Anyway, I still cannot run a task within at least 2 machines, I'm getting following message: Z:\mpirun --hostfile z:\hosts.txt -np 2 hostname connecting to host1 username:cluster password:******** Save Credential?(Y/N) y [host0:04728] This feature hasn't been implemented yet. [host0:04728] Could not connect to namespace cimv2 on node host1. Error code =-2147024891 -------------------------------------------------------------------------- mpirun was unable to start the specified application as it encountered an error. More information may be available above. -------------------------------------------------------------------------- I googled a little and did all the things as described here: http://www.open-mpi.org/community/lists/users/2010/03/12355.php but I'm still getting the same error. Can anyone help me? Upd2: Error code -2147024891 might be WMI error WBEM_E_INVALID_PARAMETER (0x80041008) which occures when one of the parameters passed to the WMI call is not correct. Does this mean that the problem is in OpenMPI source code itself? Or maybe it's because of wrong/outdated wincred.h and credui.lib I used while building OpenMPI from the source code?

    Read the article

  • SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Introduction – Day 1 of 31

    - by pinaldave
    List of all the Interview Questions and Answers Series blogs Posts covering interview questions and answers always make for interesting reading.  Some people like the subject for their helpful hints and thought provoking subject, and others dislike these posts because they feel it is nothing more than cheating.  I’d like to discuss the pros and cons of a Question and Answer format here. Interview Questions and Answers are Helpful Just like blog posts, books, and articles, interview Question and Answer discussions are learning material.  The popular Dummy’s books or Idiots Guides are not only for “dummies,” but can help everyone relearn the fundamentals.  Question and Answer discussions can serve the same purpose.  You could call this SQL Server Fundamentals or SQL Server 101. I have administrated hundreds of interviews during my career and I have noticed that sometimes an interviewee with several years of experience lacks an understanding of the fundamentals.  These individuals have been in the industry for so long, usually working on a very specific project, that the ABCs of the business have slipped their mind. Or, when a college graduate is looking to get into the industry, he is not expected to have experience since he is just graduated. However, the new grad is expected to have an understanding of fundamentals and theory.  Sometimes after the stress of final exams and graduation, it can be difficult to remember the correct answers to interview questions, though. An interview Question and Answer discussion can be very helpful to both these individuals.  It is simply a way to go back over the building blocks of a topic.  Many times a simple review like this will help “jog” your memory, and all those previously-memorized facts will come flooding back to you.  It is not a way to re-learn a topic, but a way to remind yourself of what you already know. A Question and Answer discussion can also be a way to go over old topics in a more interesting manner.  Especially if you have been working in the industry, or taking lots of classes on the topic, everything you read can sound like a repeat of what you already know.  Going over a topic in a new format can make the material seem fresh and interesting.  And an interested mind will be more engaged and remember more in the end. Interview Questions and Answers are Harmful A common argument against a Question and Answer discussion is that it will give someone a “cheat sheet.” A new guy with relatively little experience can read the interview questions and answers, and then memorize them. When an interviewer asks him the same questions, he will repeat the answers and get the job. Honestly, is he good hire because he memorized the interview questions? Wouldn’t it be better for the interviewer to hire someone with actual experience?  The answer is not as easy as it seems – there are many different factors to be considered. If the interviewer is asking fundamentals-related questions only, he gets the answers he wants to hear, and then hires this first candidate – there is a good chance that he is hiring based on personality rather than experience.  If the interviewer is smart he will ask deeper questions, have more than one person on the interview team, and interview a variety of candidates.  If one interviewee happens to memorize some answers, it usually doesn’t mean he will automatically get the job at the expense of more qualified candidates. Another argument against interview Question and Answers is that it will give candidates a false sense of confidence, and that they will appear more qualified than they are. Well, if that is true, it will not last after the first interview when the candidate is asked difficult questions and he cannot find the answers in the list of interview Questions and Answers.  Besides, confidence is one of the best things to walk into an interview with! In today’s competitive job market, there are often hundreds of candidates applying for the same position.  With so many applicants to choose from, interviewers must make decisions about who to call back and who to hire based on their gut feeling.  One drawback to reading an interview Question and Answer article is that you might sound very boring in your interview – saying the same thing as every single candidate, and parroting answers that sound like someone else wrote them for you – because they did.  However, it is definitely better to go to an interview prepared, just make sure that you give a lot of thought to your answers to make them sound like your own voice.  Remember that you will be hired based on your skills as well as your personality, so don’t think that having all the right answers will make get you hired.  A good interviewee will be prepared, confident, and know how to stand out. My Opinion A list of interview Questions and Answers is really helpful as a refresher or for beginners. To really ace an interview, one needs to have real-world, hands-on experience with SQL Server as well. Interview questions just serve as a starter or easy read for experienced professionals. When I have to learn new technology, I often search online for interview questions and get an idea about the breadth and depth of the technology. Next Action I am going to write about interview Questions and Answers for next 30 days. I have previously written a series of interview questions and answers; now I have re-written them keeping the latest version of SQL Server and current industry progress in mind. If you have faced interesting interview questions or situations, please write to me and I will publish them as a guest post. If you want me to add few more details, leave a comment and I will make sure that I do my best to accommodate. Tomorrow we will start the interview Questions and Answers series, with a few interesting stories, best practices and guest posts. We will have a prize give-away and other awards when the series ends. List of all the Interview Questions and Answers Series blogs Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SQL SERVER – SSIS Look Up Component – Cache Mode – Notes from the Field #028

    - by Pinal Dave
    [Notes from Pinal]: Lots of people think that SSIS is all about arranging various operations together in one logical flow. Well, the understanding is absolutely correct, but the implementation of the same is not as easy as it seems. Similarly most of the people think lookup component is just component which does look up for additional information and does not pay much attention to it. Due to the same reason they do not pay attention to the same and eventually get very bad performance. Linchpin People are database coaches and wellness experts for a data driven world. In this 28th episode of the Notes from the Fields series database expert Tim Mitchell (partner at Linchpin People) shares very interesting conversation related to how to write a good lookup component with Cache Mode. In SQL Server Integration Services, the lookup component is one of the most frequently used tools for data validation and completion.  The lookup component is provided as a means to virtually join one set of data to another to validate and/or retrieve missing values.  Properly configured, it is reliable and reasonably fast. Among the many settings available on the lookup component, one of the most critical is the cache mode.  This selection will determine whether and how the distinct lookup values are cached during package execution.  It is critical to know how cache modes affect the result of the lookup and the performance of the package, as choosing the wrong setting can lead to poorly performing packages, and in some cases, incorrect results. Full Cache The full cache mode setting is the default cache mode selection in the SSIS lookup transformation.  Like the name implies, full cache mode will cause the lookup transformation to retrieve and store in SSIS cache the entire set of data from the specified lookup location.  As a result, the data flow in which the lookup transformation resides will not start processing any data buffers until all of the rows from the lookup query have been cached in SSIS. The most commonly used cache mode is the full cache setting, and for good reason.  The full cache setting has the most practical applications, and should be considered the go-to cache setting when dealing with an untested set of data. With a moderately sized set of reference data, a lookup transformation using full cache mode usually performs well.  Full cache mode does not require multiple round trips to the database, since the entire reference result set is cached prior to data flow execution. There are a few potential gotchas to be aware of when using full cache mode.  First, you can see some performance issues – memory pressure in particular – when using full cache mode against large sets of reference data.  If the table you use for the lookup is very large (either deep or wide, or perhaps both), there’s going to be a performance cost associated with retrieving and caching all of that data.  Also, keep in mind that when doing a lookup on character data, full cache mode will always do a case-sensitive (and in some cases, space-sensitive) string comparison even if your database is set to a case-insensitive collation.  This is because the in-memory lookup uses a .NET string comparison (which is case- and space-sensitive) as opposed to a database string comparison (which may be case sensitive, depending on collation).  There’s a relatively easy workaround in which you can use the UPPER() or LOWER() function in the pipeline data and the reference data to ensure that case differences do not impact the success of your lookup operation.  Again, neither of these present a reason to avoid full cache mode, but should be used to determine whether full cache mode should be used in a given situation. Full cache mode is ideally useful when one or all of the following conditions exist: The size of the reference data set is small to moderately sized The size of the pipeline data set (the data you are comparing to the lookup table) is large, is unknown at design time, or is unpredictable Each distinct key value(s) in the pipeline data set is expected to be found multiple times in that set of data Partial Cache When using the partial cache setting, lookup values will still be cached, but only as each distinct value is encountered in the data flow.  Initially, each distinct value will be retrieved individually from the specified source, and then cached.  To be clear, this is a row-by-row lookup for each distinct key value(s). This is a less frequently used cache setting because it addresses a narrower set of scenarios.  Because each distinct key value(s) combination requires a relational round trip to the lookup source, performance can be an issue, especially with a large pipeline data set to be compared to the lookup data set.  If you have, for example, a million records from your pipeline data source, you have the potential for doing a million lookup queries against your lookup data source (depending on the number of distinct values in the key column(s)).  Therefore, one has to be keenly aware of the expected row count and value distribution of the pipeline data to safely use partial cache mode. Using partial cache mode is ideally suited for the conditions below: The size of the data in the pipeline (more specifically, the number of distinct key column) is relatively small The size of the lookup data is too large to effectively store in cache The lookup source is well indexed to allow for fast retrieval of row-by-row values No Cache As you might guess, selecting no cache mode will not add any values to the lookup cache in SSIS.  As a result, every single row in the pipeline data set will require a query against the lookup source.  Since no data is cached, it is possible to save a small amount of overhead in SSIS memory in cases where key values are not reused.  In the real world, I don’t see a lot of use of the no cache setting, but I can imagine some edge cases where it might be useful. As such, it’s critical to know your data before choosing this option.  Obviously, performance will be an issue with anything other than small sets of data, as the no cache setting requires row-by-row processing of all of the data in the pipeline. I would recommend considering the no cache mode only when all of the below conditions are true: The reference data set is too large to reasonably be loaded into SSIS memory The pipeline data set is small and is not expected to grow There are expected to be very few or no duplicates of the key values(s) in the pipeline data set (i.e., there would be no benefit from caching these values) Conclusion The cache mode, an often-overlooked setting on the SSIS lookup component, represents an important design decision in your SSIS data flow.  Choosing the right lookup cache mode directly impacts the fidelity of your results and the performance of package execution.  Know how this selection impacts your ETL loads, and you’ll end up with more reliable, faster packages. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSIS

    Read the article

  • Remote administer Network Policy Server

    - by Jason Stangroome
    In our domain I have a Windows Server 2008 R2 machine "GWY" with the Network Policy and Access Services role installed. From this machine I can open the Network Policy Server management console to administer this role. However, I have another Server 2008 R2 machine "WKS" in the domain where we have all the management consoles installed so we can manage all the servers from one location. I cannot find how to access the Network Policy Server console on this machine though.

    Read the article

  • VPN Connection causes DNS to use wrong DNS server

    - by Bryan
    I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

    Read the article

  • ASUS P8B75-M Support Drivers incompatible with Win Server 2003

    - by Killrawr
    Hey I've just installed Windows Server 2003 Enterprise onto a newly built PC with this motherboard, but when I try to install the CDROM Support files it reports with an alert that says "Support files incompatible with WIN... blah blah" (Basically they seem to be only compatible with win7). Should I be installing Windows Server 2012 for these drivers? or are there drivers that are compatible with the Server 2003 Operating System?

    Read the article

  • Repeated requests on our server?

    - by pitty.platsch
    I encountered something strange in the access log of our Apache server which I cannot explain. Requests for webpages that I or my colleagues do from the office's Windows network get repeated by another IP (that we don't know) a couple of seconds later. The user agent repeating our requests is Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2) Has anyone an idea? Update: I've got some more information now. The referrer of the replicate is set to the URL I requested before and it's not the exact same request as the protocol version is changed from 'HTTP/1.1' to 'HTTP/1.0'. The IP is not just one, it's just one of a subnet (80.40.134.*). It's just the first request to a resource that's get repeated, so it seems the "spy" is building up some kind of cache of visited places. The repeater is also picky. I tried randomly URLs with different HTTP status codes and different file patterns. 301s and 200s are redone, 404s not. Image extensions seem to be ignored. While doing my tests I discovered that this behavior seems to be common as I found other clients visiting just after the first requests: 66.249.73.184 - - [25/Oct/2012:10:51:33 +0100] "GET /foobar/ HTTP/1.1" 200 10952 "-" "Mediapartners-Google" 50.17.125.180 - - [25/Oct/2012:10:51:33 +0100] "GET /foobar/ HTTP/1.1" 200 41312 "-" "Mozilla/5.0 (compatible; proximic; +http://www.proximic.com/info/spider.php)" I wasn't aware about this practice, so I don't see it that much as a threat anymore. I still want to find out who this is, so any further help is appreciated. I'll try later if this also happens if I query some other server where I have access to the access logs and will update here then.

    Read the article

  • Pictures Are Printed Extremely Dark

    - by Sam
    Problem I printed a picture using Windows Photo Viewer, and the resulting print was significantly darker than the original image. It was almost completely black. I'm using a Brother HL-2270DW printer. Troubleshooting Checked Windows's Colour Profile for printer: not set Checked available installed colour profiles: didn't see specific to this printer What doesn't work Printing it from Windows Photo Viewer Printing it from Paint.NET What works The printer's built-in self-test print page Windows's test print page Printing text from Notepad++ So the problem might be specific to: How Windows prints photos/pictures The picture How the printer prints photos/pictures

    Read the article

  • Path Length in Windows

    - by Dexter
    Is there any reason paths are still limited to ~250 characters in Windows? I'm not asking about a solution here (since there isn't one, other than \\?\ perhaps), but about why this is still an issue in 2012. Microsoft itself has failed to provide an explanation, so I'm hoping that maybe someone here, who has more insight into this than me, can provide an answer. Also, if \\?\ is supposed to be the "cure" to this, why aren't paths implicitly converted to the \\?\ notation by Microsoft's own programs?

    Read the article

  • Can I select 0 columns in SQL Server?

    - by Woody Zenfell III
    I am hoping this question fares a little better than the similar Create a table without columns. Yes, I am asking about something that will strike most as pointlessly academic. It is easy to produce a SELECT result with 0 rows (but with columns), e.g. SELECT a = 1 WHERE 1 = 0. Is it possible to produce a SELECT result with 0 columns (but with rows)? e.g. something like SELECT NO COLUMNS FROM Foo. (This is not valid T-SQL.) I came across this because I wanted to insert several rows without specifying any column data for any of them. e.g. (SQL Server 2005) CREATE TABLE Bar (id INT NOT NULL IDENTITY PRIMARY KEY) INSERT INTO Bar SELECT NO COLUMNS FROM Foo -- Invalid column name 'NO'. -- An explicit value for the identity column in table 'Bar' can only be specified when a column list is used and IDENTITY_INSERT is ON. One can insert a single row without specifying any column data, e.g. INSERT INTO Foo DEFAULT VALUES. One can query for a count of rows (without retrieving actual column data from the table), e.g. SELECT COUNT(*) FROM Foo. (But that result set, of course, has a column.) I tried things like INSERT INTO Bar () SELECT * FROM Foo -- Parameters supplied for object 'Bar' which is not a function. -- If the parameters are intended as a table hint, a WITH keyword is required. and INSERT INTO Bar DEFAULT VALUES SELECT * FROM Foo -- which is a standalone INSERT statement followed by a standalone SELECT statement. I can do what I need to do a different way, but the apparent lack of consistency in support for degenerate cases surprises me. I read through the relevant sections of BOL and didn't see anything. I was surprised to come up with nothing via Google either.

    Read the article

  • SQL Query for generating matrix like output querying related table in SQL Server

    - by Nagesh
    I have three tables: Product ProductID ProductName 1 Cycle 2 Scooter 3 Car Customer CustomerID CustomerName 101 Ronald 102 Michelle 103 Armstrong 104 Schmidt 105 Peterson Transactions TID ProductID CustomerID TranDate Amount 10001 1 101 01-Jan-11 25000.00 10002 2 101 02-Jan-11 98547.52 10003 1 102 03-Feb-11 15000.00 10004 3 102 07-Jan-11 36571.85 10005 2 105 09-Feb-11 82658.23 10006 2 104 10-Feb-11 54000.25 10007 3 103 20-Feb-11 80115.50 10008 3 104 22-Feb-11 45000.65 I have written a query to group the transactions like this: SELECT P.ProductName AS Product, C.CustName AS Customer, SUM(T.Amount) AS Amount FROM Transactions AS T INNER JOIN Product AS P ON T.ProductID = P.ProductID INNER JOIN Customer AS C ON T.CustomerID = C.CustomerID WHERE T.TranDate BETWEEN '2011-01-01' AND '2011-03-31' GROUP BY P.ProductName, C.CustName ORDER BY P.ProductName which gives the result like this: Product Customer Amount Car Armstrong 80115.50 Car Michelle 36571.85 Car Schmidt 45000.65 Cycle Michelle 15000.00 Cycle Ronald 25000.00 Scooter Peterson 82658.23 Scooter Ronald 98547.52 Scooter Schmidt 54000.25 I need result of query in MATRIX form like this: Customer |------------ Amounts --------------- Name |Car Cycle Scooter Totals Armstrong 80115.50 0.00 0.00 80115.50 Michelle 36571.85 15000.00 0.00 51571.85 Ronald 0.00 25000.00 98547.52 123547.52 Peterson 0.00 0.00 82658.23 82658.23 Schmidt 45000.65 0.00 54000.25 99000.90 Please help me to acheive the above result in SQL Server 2005. Using mulitple views or even temporory tables is fine for me.

    Read the article

  • SQL Server - Multi-Column substring matching

    - by hamlin11
    One of my clients is hooked on multi-column substring matching. I understand that Contains and FreeText search for words (and at least in the case of Contains, word prefixes). However, based upon my understanding of this MSDN book, neither of these nor their variants are capable of searching substrings. I have used LIKE rather extensively (Select * from A where A.B Like '%substr%') Sample table A: ID | Col1 | Col2 | Col3 | ------------------------------------- 1 | oklahoma | colorado | Utah | 2 | arkansas | colorado | oklahoma | 3 | florida | michigan | florida | ------------------------------------- The following code will give us row 1 and row 2: select * from A where Col1 like '%klah%' or Col2 like '%klah%' or Col3 like '%klah%' This is rather ugly, probably slow, and I just don't like it very much. Probably because the implementations that I'm dealing with have 10+ columns that need searched. The following may be a slight improvement as code readability goes, but as far as performance, we're still in the same ball park. select * from A where (Col1 + ' ' + Col2 + ' ' + Col3) like '%klah%' I have thought about simply adding insert, update, and delete triggers that simply add the concatenated version of the above columns into a separate table that shadows this table. Sample Shadow_Table: ID | searchtext | --------------------------------- 1 | oklahoma colorado Utah | 2 | arkansas colorado oklahoma | 3 | florida michigan florida | --------------------------------- This would allow us to perform the following query to search for '%klah%' select * from Shadow_Table where searchtext like '%klah%' I really don't like having to remember that this shadow table exists and that I'm supposed to use it when I am performing multi-column substring matching, but it probably yields pretty quick reads at the expense of write and storage space. My gut feeling tells me there there is an existing solution built into SQL Server 2008. However, I don't seem to be able to find anything other than research papers on the subject. Any help would be appreciated.

    Read the article

  • When connecting SAP Business One to SQL Server 2005, what is the

    - by Nick
    we have SAP Business One - Fourth Shift Edition running here at a small manufacturing company. The consulting company that has come in to do the installation/implementation uses the "sa" id/pass to initially connect to the database to get the list of companies. From then on, I have to assume that its the sa id/pass that is being used to connect the client software to the database. Is this appropriate? I dont know where this data is being stored... as an ODBC connection? directly in the registry somewhere? Is it secure? Would it be better to set the users network ID in the database security and then use the "trusted connection" setting instead? Or do most people create a separate login in the database for each user and use that in the client settings? seems like the easiest way would be to add the users network login to the sql server security so they can use the "trusted connection"... but then wouldn't that allow ANY software to connect to the database from that machine? So anyways: what are the best-practices for setting this up?

    Read the article

  • SQL Server INSERT ... SELECT Statement won't parse

    - by Jim Barnett
    I am getting the following error message with SQL Server 2005 Msg 120, Level 15, State 1, Procedure usp_AttributeActivitiesForDateRange, Line 18 The select list for the INSERT statement contains fewer items than the insert list. The number of SELECT values must match the number of INSERT columns. I have copy and pasted the select list and insert list into excel and verified there are the same number of items in each list. Both tables an additional primary key field with is not listed in either the insert statement or select list. I am not sure if that is relevant, but suspicious it may be. Here is the source for my stored procedure: CREATE PROCEDURE [dbo].[usp_AttributeActivitiesForDateRange] ( @dtmFrom DATETIME, @dtmTo DATETIME ) AS BEGIN SET NOCOUNT ON; DECLARE @dtmToWithTime DATETIME SET @dtmToWithTime = DATEADD(hh, 23, DATEADD(mi, 59, DATEADD(s, 59, @dtmTo))); -- Get uncontested DC activities INSERT INTO AttributedDoubleClickActivities ([Time], [User-ID], [IP], [Advertiser-ID], [Buy-ID], [Ad-ID], [Ad-Jumpto], [Creative-ID], [Creative-Version], [Creative-Size-ID], [Site-ID], [Page-ID], [Country-ID], [State Province], [Areacode], [OS-ID], [Domain-ID], [Keyword], [Local-User-ID], [Activity-Type], [Activity-Sub-Type], [Quantity], [Revenue], [Transaction-ID], [Other-Data], Ordinal, [Click-Time], [Event-ID]) SELECT [Time], [User-ID], [IP], [Advertiser-ID], [Buy-ID], [Ad-ID], [Ad-Jumpto], [Creative-ID], [Creative-Version], [Creative-Size-ID], [Site-ID], [Page-ID], [Country-ID], [State Province], [Areacode], [OS-ID], [Domain-ID], [Keyword], [Local-User-ID] [Activity-Type], [Activity-Sub-Type], [Quantity], [Revenue], [Transaction-ID], [Other-Data], REPLACE(Ordinal, '?', '') AS Ordinal, [Click-Time], [Event-ID] FROM Activity_Reports WHERE [Time] BETWEEN @dtmFrom AND @dtmTo AND REPLACE(Ordinal, '?', '') IN (SELECT REPLACE(Ordinal, '?', '') FROM Activity_Reports WHERE [Time] BETWEEN @dtmFrom AND @dtmTo EXCEPT SELECT CONVERT(VARCHAR, TripID) FROM VisualSciencesActivities WHERE [Time] BETWEEN @dtmFrom AND @dtmTo); END GO

    Read the article

  • Something confusing about FormsOf (Sql server Full-Text searching)

    - by AspOnMyNet
    hi I'm using Sql Server 2008 1) A given <simple_term> within a <generation_term> will not match both nouns and verbs. If I understand the above text correctly, then query SELECT * FROM someTable WHERE CONTAINS ( *, ' FORMSOF ( INFLECTIONAL, park ) ' ) should search for either nouns or verbs derived from the root word “park”, but not for both? Thus out of the two rows, one containing noun parks and other verb parking, the above query should return just one of the two rows? But as it turns out, query returns both rows, so are perhaps my assumptions a bit off or is the above quote wrong?! 2) From Msdn: If freetext_string is enclosed in double quotation marks, a phrase match is instead performed; stemming and thesaurus are not performed. According to the above quote the following query shouldn’t return rows containing strings surfing ( due to query not performing stemming ), surf ( due to query performing phrase matching and not individual word matching ) and surfing with suzy’s sister ( due to query not performing stemming and due to query performing phrase matching and not word matching ), but it does. Thus, it appears that even when *freetext_string* is enclosed in double quotation marks, stemming is still preformed, while phrase matching is not: SELECT * FROM someTable WHERE FREETEXT( *, ' "surf sister" ' ) So is the above quote wrong or...? thanx

    Read the article

  • SQL Server query

    - by carrot_programmer_3
    Hi, I have a SQL Server DB containing a registrations table that I need to plot on a graph over time. The issue is that I need to break this down by where the user registered from (e.g. website, wap site, or a mobile application). the resulting output data should look like this... [date] [num_reg_website] [num_reg_wap_site] [num_reg_mobileapp] 1 FEB 2010,24,35,64 2 FEB 2010,23,85,48 3 FEB 2010,29,37,79 etc... The source table is as follows... UUID(int), signupdate(datetime), requestsource(varchar(50)) some smple data in this table looks like this... 1001,2010-02-2:00:12:12,'website' 1002,2010-02-2:00:10:17,'app' 1003,2010-02-3:00:14:19,'website' 1004,2010-02-4:00:16:18,'wap' 1005,2010-02-4:00:18:16,'website' Running the following query returns one data column 'total registrations' for the website registrations but I'm not sure how to do this for multiple columns unfortunatly.... select CAST(FLOOR(CAST([signupdate]AS FLOAT ))AS DATETIME) as [signupdate], count(UUID) as 'total registrations' FROM [UserRegistrationRequests] WHERE requestsource = 'website' group by CAST(FLOOR(CAST([signupdate]AS FLOAT ))AS DATETIME)

    Read the article

  • No Preview Images in File Open Dialogs on Windows 7

    - by Rick Strahl
    I’ve been updating some file uploader code in my photoalbum today and while I was working with the uploader I noticed that the File Open dialog using Silverlight that handles the file selections didn’t allow me to ever see an image preview for image files. It sure would be nice if I could preview the images I’m about to upload before selecting them from a list. Here’s what my list looked like: This is the Medium Icon view, but regardless of the views available including Content view only icons are showing up. Silverlight uses the standard Windows File Open Dialog so it uses all the same settings that apply to Explorer when displaying content. It turns out that the Customization options in particular are the problem here. Specifically the Always show icons, never thumbnails option: I had this option checked initially, because it’s one of the defenses against runaway random Explorer views that never stay set at my preferences. Alas, while this setting affects Explorer views apparently it also affects all dialog based views in the same way. Unchecking the option above brings back full thumbnailing for all content and icon views. Here’s the same Medium Icon view after turning the option off: which obviously works a whole lot better for selection of images. The bummer of this is that it’s not controllable at the dialog level – at least not in Silverlight. Dialogs obviously have different requirements than what you see in Explorer so the global configuration is a bit extreme especially when there are no overrides on the dialog interface. Certainly for Silverlight the ability to have previews is a key feature for many applications since it will be dealing with lots of media content most likely. Hope this helps somebody out. Thanks to Tim Heuer who helped me track this down on Twitter.© Rick Strahl, West Wind Technologies, 2005-2010Posted in Silverlight  Windows  

    Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >