Search Results

Search found 19224 results on 769 pages for 'neural network tuning'.

Page 335/769 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342 | Next Page >

Android device unable to obtain ip address connecting to AP created with Hostapd

- by user114392

I have a wired internet connection that works behind an authenticated proxy server. I followed the steps mentioned here and managed to create a hotspot which my google nexus 7 detects. However, it seems stuck at "obtaining an ip address" and is not able to connect to the internet. I initially received the following error message when running the script in the terminal: dnsmasq: failed to create listening socket for 127.0.0.1: Address already in use [fail] I figured it is because of a conflict with the network manager, I commented out the "dns=dnsmasq" line in the nm configuration file. After a network-manager restart, the first error doesn't show up but I get the following: Configuration file: /etc/hostapd.conf Failed to create interface mon.wlan0: -23 (Too many open files in system) Try to remove and re-create mon.wlan0 In both cases, however, the hotspot is created and is detected by my android device. only that it cannot "obtain an ip address" and connect to it. Is it because my eth0 connects via a proxy server? Or could there be something wrong with the dnsmasq config? Any help would be appreciated.

Read the article
How can I permanently remove default root hints from a Server 2008 DNS server?

- by TonyD

My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

Read the article
"Account locked out" security event at midnight

- by Kev

The last three midnights I've gotten an Event ID 539 in the log...about my own account: Event Type: Failure Audit Event Source: Security Event Category: Logon/Logoff Event ID: 539 Date: 2010-04-26 Time: 12:00:20 AM User: NT AUTHORITY\SYSTEM Computer: SERVERNAME Description: Logon Failure: Reason: Account locked out User Name: MyUser Domain: MYDOMAIN Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: SERVERNAME Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: - Source Port: - It's always within a half minute of midnight. There are no login attempts before it. Right after it (in the same second) there's a success audit entry: Logon attempt using explicit credentials: Logged on user: User Name: SERVERNAME$ Domain: MYDOMAIN Logon ID: (0x0,0x3E7) Logon GUID: - User whose credentials were used: Target User Name: MyUser Target Domain: MYDOMAIN Target Logon GUID: - Target Server Name: servername.mydomain.lan Target Server Info: servername.mydomain.lan Caller Process ID: 2724 Source Network Address: - Source Port: - The process ID was the same on all three of them, so I looked it up, and right now at least it maps to TCP/IP Services (Microsoft). I don't believe I changed any policies or anything on Friday. How should I interpret this?

Read the article
Simple Workstation Imaging Solution?

- by Will

Hey guys, I need a fairly cheap imaging solution for Windows XP corporate desktops. Ideally, I'd be able to set up a desktop exactly as we want it, create an image, deploy this image to a server, then boot a new desktop to a CD/USB Drive/Network and quickly set up the workstation. Ideally, each computer would also have a unique workstation name. Any ideas? Right now I'm using a custom built Linux DD solution, but it's slow, not network-based, can't image multiple computers at the same time as there's only one copy on a USB drive, and can't uniquely name the computers. Thanks, Will

Read the article
optimizing file share performance on Win2k8?

- by Kirk Marple

We have a case where we're accessing a RAID array (drive E:) on a Windows Server 2008 SP2 x86 box. (Recently installed, nothing other than SQL Server 2005 on the server.) In one scenario, when directly accessing it (E:\folder\file.xxx) we get 45MBps throughput to a video file. If we access the same file on the same array, but through UNC path (\server\folder\file.xxx) we get about 23MBps throughput with the exact same test. Obviously the second test is going through more layers of the stack, but that's a major performance hit. What tuning should we be looking at for making the UNC path be closer in performance to the direct access case? Thanks, Kirk (corrected: it is CIFS not SMB, but generalized title to 'file share'.) (additional info: this happens during the read from a single file, not an issue across multiple connections. the file is on the local machine, but exposed via file share. so client and file server are both same Windows 2008 server.)

Read the article
Connect to MS Sql 2008 on local VM

- by Campo

I have a test machine. Server 2008 with Hyper V MSSQL 2008 Enterprise Lets call it MACHINE A on the VM it is as well Server 2008 with another MSSQL 2008 Ent Call it VM B I setup a DB on MACHINE A then backed it up and restored following the prepare database for mirroring instructions on MSDN onto VM B. I used to be able to connect to the VM B Instance from the main test server (MACHINE A) but now I cannot for some reason. It cannot seem to find the instance at all even when I browse network databases. I can ping the VM from any computer on the network and access its shares so I know it is discoverable. Just the end of a long day maybe I am missing something here.

Read the article
Facebook Stories for Retailers

- by David Dorf

Getting people to "like" a brand is important because it opens the door to a possible B2C relationship. Once a person likes that brand, the brand can post to their newsfeed with promotions, announcements, and surveys. At least for me, I "hide" the noisy brands and just monitor the ones that keep posts under 4 times a week. I see lots of people, especially with fashion brands, comment on postings at which point the posting is seen by their network. A metric I've heard (but not verified) is that for every person that comments, ten of their friends see the original posting. That's a pretty cheap way to communicate to potential customers in a viral way. Over at mainstreet.com they compiled the a list of the top liked retailers on Facebook as of Feb 1, 2011. They are listed below: 19,414,892 Starbucks 11,302,939 Victoria's Secret 7,925,184 Zara 7,032,398 McDonald's 6,117,222 H&M 5,400,586 Taco Bell 4,665,760 Subway 4,494,849 Lacoste 4,185,570 Hollister 3,973,181 Forever 21 So I guess the public likes their fast-food and fashion. To take this to the next level, Facebook is now displaying Sponsored Stories, which I saw for the first time on my page this weekend. I found this picture at the Wall Blog that depicits Sponsored Stories very well. Over on the right-hand column of a person's page, where they see advertisements and such, Facebook will post stories involving their network of friends and their interaction with sponsored brands. Now their "likes" can suddenly become your ads. "Jessica and Philip like Starbucks. What are you waiting for?" This is another great way to take messages viral by accessing social graphs. As usual there will be a certain level of outcry from privacy advocates, but given the other more iniquitous issues, I believe this will fall by the wayside. Retailers should consider using Sponsored Stories to increase their Likes, and thus increase their voice in the social world.

Read the article
how to connect virtual box os and local machine

- by Nrew

This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

Read the article
Performance issues with visibility detection and object transparency

- by maul

I'm working on a 3d game that has a view similar to classic isometric games (diablo, etc.). One of the things I'm trying to implement is the effect of turning walls transparent when the player walks behind them. By itself this is not a huge issue, but I'm having trouble determining which walls should be transparent exactly. I can't use a circle or square mask. There are a lot of cases where the wall piece at the same (relative) position has different visibility depending on the surrounding area. With the help of a friend I came up with this algorithm: Create a grid around the player that contains a lot of "visibility points" (my game is semi tile-based so I create one point for every tile on the grid) - the size of the square's side is close to the radius where I make objects transparent. I found 6x6 to be a good value, so that's 36 visibility points total. For every visibility point on the grid, check if that point is in the player's line of sight. For every visibility point that is in the LOS, cast a ray from the camera to that point and mark all objects the ray hits as transparent. This algorithm works - not perfectly, but only requires some tuning - however this is very slow. As you can see, it requries 36 ray casts minimum, but most of the time 60-70 depending on the position. That's simply too much for the CPU. Is there a better way to do this? I'm using Unity 3D but I'm not looking for an engine-specific solution.

Read the article
Corrupted .WAR file after transfer from 32-64 bit Windows Server to Desktop or vice versa

- by Albert Widjaja

Hi All, Does anyone experience this problem of corrupted .WAR file after it has been copied over the network share ? this is .WAR file (Web Archive) the J2EE application file (.WAR file is compressed with the same zip algorithm i think ?) Scenario 1: Windows Server 2008 x64 transfer into Windows XP using RDP client (Local Devices and Resources) Scenario 2: Windows XP 32 bit transfer into Windows Server 2003 x64 using shared network drive (port 445 SMB ?) for both of the scenario it always failed / corrupted (the source code seems to be duplicated at the end of line when you open up in the Eclipse / Java IDE). but when in both scenario i compressed the file into .ZIP file everything is OK. can anyone explains why this problem happens ? Thanks, Albert

Read the article
How can I create an external SSL wrapper/tunnel page for an insecure webpage behind a firewall?

- by Ross Rogers

I have an security cam with a built-in webpage inside my home network. That camera is using basic HTTP authentication instead of SSL. I want to be able to access the camera's webpage from outside my network, but I don't want to open an unencrypted video stream to the outside world. Right now, I'm doing some cumbersome ssh tunneling where I bounce off an ssh server like: ssh -N -L 9090:CAMERA_IP:80 [email protected] and then I connect to my web page like: http://localhost:9090 But this is a pain. Now, gentle reader, I beseech you to tell me how I can use linux (Ubuntu) to get a fully encrypted SSL connection to my internal web page without the hassle of creating an ssh tunnel each time. I believe I can use stunnel, but I'm not sure of the command.

Read the article
Can't communicate with Primary DNS Server

- by horsley

A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

Read the article
How do I decrypt WPA2 encrypted packets using Wireshark?

- by Rox

I am trying to decrypt my WLAN data with Wireshark. I have already read and tried eveything on this page but without any success (well, I tried the example dump on that page and succeeded, but I fail with my own packets). I caught the four-way handshake from another client connecting to the network. My network info is as follows: SSID: test Passphrase: mypass The above info would give this preshared key: 58af7d7ce2e11faeab2278a5ef45de4944385f319b52a5b2d82389faedd3f9bf In Wireshark in the Preferences--IEEE 802.11 I have set this line as Key 1: wpa-psk:58af7d7ce2e11faeab2278a5ef45de4944385f319b52a5b2d82389faedd3f9bf I have tried the different options of "Ignore the protection bit" but none works. What could I have missed?

Read the article
How do you add a certificate for WLAN in Linux, at the command-line?

- by Neil

I'm using Maemo on a Nokia n810 Internet tablet, and when given a list of installed certificates to choose from when connecting to a PEAP wireless network, it's always blank. I've already installed a couple of certificates through the gui on the device, and only the certificate authorities show up. I've confirmed that Maemo's connection software that handles certificates is buggy, in such a way that certificates are never added, or properly added certificates cannot be found. Is there a way to add WLAN certificates at the command-line, and connect to a wireless network at the command-line as well? I used to use iwconfig to connect, but I never used it with PEAP. Note: I have nothing in /etc/ssl/certs

Read the article
Can't access an internal IIS web site via IP address, only hostname

- by chris-untrod-com

I have a machine on my home network running Windows Server 2008 (IIS7) with a web application running under default website called HTCOMNET. The network is just on a Windows Workgroup. The server is named nas1 and has a (dynamically assigned) IPv4 address of 192.168.2.12. I can ping 192.168.2.12. When I ping the machine by name ("nas1"), the hostname resolves to an IPv6 link-local address (as opposed to the ipv4 address). In a browser, I can go to http://nas1/HTCOMNET/ and IIS serves the site, no problem. But if I go to http://192.168.2.12/HTCOMNET, no dice. I have all the windows firewalls turned off. Any idea what's going on? I can't for the life of me figure out why I can't hit IIS via the IP. I feel like it's something really obvious, but i can't figure out what. Thanks!

Read the article
How can I force Parallels' networking to obtain an IP through a wireless router?

- by RLH

Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

Read the article
Great Blog Comments

- by Paul Sorensen

Just a quick note to let you know that in the interest of keeping the most useful content available here on the Oracle Certification Blog, we do moderate the comments. We welcome (and encourage dialog, questions, comments, etc) here on the topics at hand. We'll never 'censor' out a comment just because we don't like it - in fact, this is how we often learn ways in which we can do better. But of course we will filter out the typical list like anyone else: crude/offensive remarks, foul language, reference to illegal activity, etc. We will also often redirect any customer-service type inquiries to [email protected] where they can best be handled.Also, if you have a question of a general nature, please research it on the Oracle Certification website first. We often won't respond to questions asking such as "tell me how to get 11g ocp", as we've already made sure that you have that kind of information available. Now if we've inadvertently 'hidden' something on our site (gulp), then fair enough - please let us know that you're having a hard time finding it and we'll be sure to try and "unbury it" ;-)Additionally, you may have more of an 'opinion' type question, such as "should I do 'x' certification or 'y' certification." For these, we highly recommend checking on the Oracle Technology Network (OTN) Certification Forum, where you can engage in peer-to-peer discussions, share techniques, advice and best practices with others in the field.In the meantime, please continue to share your thoughts, ideas, opinions, tech tips etc - we look forward to seeing them and passing them wherever we can!QUICK LINKS:Oracle Certification WebsiteEmail - Customer ServiceOracle Technology Network (OTN) Certification Forum

Read the article
Windows 7 and XP Networking

- by David-Zazeski

I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

Read the article
Some sites won't load on Ubuntu/Mint

- by Or W

I have a REALLY weird problem with either my network or my OS. Last week I've suddenly had difficulties loading some websites or even more odd some parts of different websites. For example, I could load gmail.com, login and view the list of emails in my inbox but when I clicked one of them it would just time out. Another example is http://www.ynet.co.il, I can view the home page but going into any one of the articles fails (times out). I've tried Chrome, Firefox and Opera, all fail the same way. If I take a URL of a page I cannot load via the browser and try to wget it though the console I get the file just fine. I've formatted my machine (Used to run Ubuntu 13.04) and installed Mint Linux this time, it worked fine for a few days and now, again, having the same exact issues. Important to note that I have other machines connected either directly or via Wi-Fi to the router and they are all working fine (two win7 machines and 1 raspberry pi). Another strange behavior is that I can ftp or ssh to remote machines but cannot send files via ftp (times out) even if I set passive mode ON and when using ssh I can do just about anything but I cannot paste text into the remote machine, for example if I nano a file on the remote machine and try to paste anything from my clipboard it freezes. What I've tried so far: Disable IPv6 on the networking admin (and on firefox disabling ipv6 on the about:config page) Changing the port and the network cable I went to the store and bought a new standalone PCIe network adapter Connected my win7 laptop using the same cable and router port (sites that were not working on my Mint are working just fine on the win7 machine) Loaded Mint from a livecd, got the same result Tried changing the MTU (was 1500, tried 1492) Some observations: When I clear my browser cache and go to facebook.com for example, the homepage loads but I fail to load any profile/group page. If I refresh facebook.com homepage a couple of times it stops and fails to load until I clear my browser cache. I changed the chrome cache folder permissions to 0777 but that did not help. When I run netstat -n I see A LOT of connections that are in 'FIN_WAIT' mode (I'm guessing that's when I try to refresh pages that are not working and timing out), I have no idea what it means or if it helps anyone figure out what's wrong. The sites that are not loading correctly are always that same, they don't vary or anything and they fail to load exactly the same way on all three browsers that I've tried. When I Googled 'Ubuntu some sites not loading' I see a huge amount of complaints just like mine, but none of them that I could find actually says what the problem is or how they fixed it. Technical stuff: netstat -n ps aux netstat -nr

Read the article
Windows clients not using NTP server provided via DHCP

- by gencha

I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows: subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.200; option broadcast-address 10.10.10.255; option routers 10.10.10.1; option ntp-servers 10.10.10.1; } The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.

Read the article
NAS disk - problem with accessing SAMBA

- by dominolog

Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

Read the article
Oracle University Neue Kurse (Week 42)

- by rituchhibber

In der letzten Woche wurden von Oracle University folgende neue Kurse (bzw. Versionen davon) veröffentlicht: Database Oracle Enterprise Manager Cloud Control 12c: Install & Upgrade (Training On Demand) MySQL Performance Tuning (Training On Demand) Oracle Database 11g: New Features for Administrators (Training On Demand - In German) Oracle Database 11g: Professioneller Einstieg in SQL (Training On Demand - In German) Fusion Middleware Oracle GoldenGate 11g Management Pack: Overview (1 day - In German) Oracle GoldenGate 11g Fundamentals for Oracle (4 days) Oracle WebCenter Content 11g: Site Studio Essentials (5 days) Oracle WebCenter Portal 11g: Build Portals with Spaces (3 days) Business Intelligence Oracle BI 11g R1: Create Analyses and Dashboards (4 days) SOA & BPM SOA Adoption and Architecture Fundamentals (3 Days) eBusiness Suite R12 Oracle Using and Maintaining Approvals Management - Self-Study Course R12 Oracle HRMS Advanced Benefits Fundamentals - Self-Study Course WebLogic Oracle WebLogic Server 11g: Monitor and Tune Performance (Training On Demand) Financial Oracle Project Financial Planning 11.1.2: Create Projects ( 3 days) Tuxedo Oracle Tuxedo 12c: Application Administration (5 days) Java Java SE 7: The Platform Evolves - Self-Study Course Primevera Primavera Client/Server Partner Trainer Course - Self-Study Course Primavera Progress Reporter 8.2 - Self-Study Course Identity Management Oracle Identity Manager 11g: Essentials (4 days - In German) Wenn Sie weitere Einzelheiten erfahren oder sich über Kurstermine informieren möchten, wenden Sie sich einfach an Ihr lokales Oracle University-Team in.

Read the article
Debugging IO limitation

- by Martin F

I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

Read the article
Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

- by josecortesp

Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

Read the article
Ethernet switch not working

- by Froskoy

I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342 | Next Page >