Search Results

Search found 9396 results on 376 pages for 'stored procedures'.

Page 335/376 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

• Oracle’s New Memory-Optimized x86 Servers: Getting the Most Out of Oracle Database In-Memory

  - by Josh Rosen, x86 Product Manager-Oracle

  With the launch of Oracle Database In-Memory, it is now possible to perform real-time analytics operations on your business data as it exists at that moment – in the DRAM of the server – and immediately return completely current and consistent data. The Oracle Database In-Memory option dramatically accelerates the performance of analytics queries by storing data in a highly optimized columnar in-memory format.  This is a truly exciting advance in database technology.As Larry Ellison mentioned in his recent webcast about Oracle Database In-Memory, queries run 100 times faster simply by throwing a switch.  But in order to get the most from the Oracle Database In-Memory option, the underlying server must also be memory-optimized. This week Oracle announced new 4-socket and 8-socket x86 servers, the Sun Server X4-4 and Sun Server X4-8, both of which have been designed specifically for Oracle Database In-Memory.  These new servers use the fastest Intel® Xeon® E7 v2 processors and each subsystem has been designed to be the best for Oracle Database, from the memory, I/O and flash technologies right down to the system firmware.Amongst these subsystems, one of the most important aspects we have optimized with the Sun Server X4-4 and Sun Server X4-8 are their memory subsystems.  The new In-Memory option makes it possible to select which parts of the database should be memory optimized.  You can choose to put a single column or table in memory or, if you can, put the whole database in memory.  The more, the better.  With 3 TB and 6 TB total memory capacity on the Sun Server X4-4 and Sun Server X4-8, respectively, you can memory-optimize more, if not your entire database.   Sun Server X4-8 CMOD with 24 DIMM slots per socket (up to 192 DIMM slots per server) But memory capacity is not the only important factor in selecting the best server platform for Oracle Database In-Memory.  As you put more of your database in memory, a critical performance metric known as memory bandwidth comes into play.  The total memory bandwidth for the server will dictate the rate in which data can be stored and retrieved from memory.  In order to achieve real-time analysis of your data using Oracle Database In-Memory, even under heavy load, the server must be able to handle extreme memory workloads.  With that in mind, the Sun Server X4-8 was designed with the maximum possible memory bandwidth, providing over a terabyte per second of total memory bandwidth.  Likewise, the Sun Server X4-4 also provides extreme memory bandwidth in an even more compact form factor with over half a terabyte per second, providing customers with scalability and choice depending on the size of the database.Beyond the memory subsystem, Oracle’s Sun Server X4-4 and Sun Server X4-8 systems provide other key technologies that enable Oracle Database to run at its best.  The Sun Server X4-4 allows for up 4.8 TB of internal, write-optimized PCIe flash while the Sun Server X4-8 allows for up to 6.4 TB of PCIe flash.  This enables dramatic acceleration of data inserts and updates to Oracle Database.  And with the new elastic computing capability of Oracle’s new x86 servers, server performance can be adapted to your specific Oracle Database workload to ensure that every last bit of processing power is utilized.Because Oracle designs and tests its x86 servers specifically for Oracle workloads, we provide the highest possible performance and reliability when running Oracle Database.  To learn more about Sun Server X4-4 and Sun Server X4-8, you can find more details including data sheets and white papers here. Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software.  He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers. 

  Read the article

• How do NTP Servers Manage to Stay so Accurate?

  - by Akemi Iwaya

  Many of us have had the occasional problem with our computers and other devices retaining accurate time settings, but a quick sync with an NTP server makes all well again. But if our own devices can lose accuracy, how do NTP servers manage to stay so accurate? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. Photo courtesy of LEOL30 (Flickr). The Question SuperUser reader Frank Thornton wants to know how NTP servers are able to remain so accurate: I have noticed that on my servers and other machines, the clocks always drift so that they have to sync up to remain accurate. How do the NTP server clocks keep from drifting and always remain so accurate? How do the NTP servers manage to remain so accurate? The Answer SuperUser contributor Michael Kjorling has the answer for us: NTP servers rely on highly accurate clocks for precision timekeeping. A common time source for central NTP servers are atomic clocks, or GPS receivers (remember that GPS satellites have atomic clocks onboard). These clocks are defined as accurate since they provide a highly exact time reference. There is nothing magical about GPS or atomic clocks that make them tell you exactly what time it is. Because of how atomic clocks work, they are simply very good at, having once been told what time it is, keeping accurate time (since the second is defined in terms of atomic effects). In fact, it is worth noting that GPS time is distinct from the UTC that we are more used to seeing. These atomic clocks are in turn synchronized against International Atomic Time or TAI in order to not only accurately tell the passage of time, but also the time. Once you have an exact time on one system connected to a network like the Internet, it is a matter of protocol engineering enabling transfer of precise times between hosts over an unreliable network. In this regard a Stratum 2 (or farther from the actual time source) NTP server is no different from your desktop system syncing against a set of NTP servers. By the time you have a few accurate times (as obtained from NTP servers or elsewhere) and know the rate of advancement of your local clock (which is easy to determine), you can calculate your local clock’s drift rate relative to the “believed accurate” passage of time. Once locked in, this value can then be used to continuously adjust the local clock to make it report values very close to the accurate passage of time, even if the local real-time clock itself is highly inaccurate. As long as your local clock is not highly erratic, this should allow keeping accurate time for some time even if your upstream time source becomes unavailable for any reason. Some NTP client implementations (probably most ntpd daemon or system service implementations) do this, and others (like ntpd’s companion ntpdate which simply sets the clock once) do not. This is commonly referred to as a drift file because it persistently stores a measure of clock drift, but strictly speaking it does not have to be stored as a specific file on disk. In NTP, Stratum 0 is by definition an accurate time source. Stratum 1 is a system that uses a Stratum 0 time source as its time source (and is thus slightly less accurate than the Stratum 0 time source). Stratum 2 again is slightly less accurate than Stratum 1 because it is syncing its time against the Stratum 1 source and so on. In practice, this loss of accuracy is so small that it is completely negligible in all but the most extreme of cases. Have something to add to the explanation? Sound off in the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

  Read the article

• CodePlex Daily Summary for Saturday, April 24, 2010

  CodePlex Daily Summary for Saturday, April 24, 2010New ProjectsAutoWorkLoad: Is an application intended to load hours to accounting system such as TimeTracker automatically.Chemistry Add-in for Word: The Chemistry Add-in for Word makes it easier for students, chemists, and researchers to insert and modify chemical information, such as labels, fo...Exceptional Visualizer: A Debugger Visualizer for VS 2008 that allows for effective visual tracing of an Exception stack. Useful for Unity Resolution Exceptions as seen i...FTE Owner Requirement: FIM 2010 Activity: Forefront Identity Manager 2010 (FIM) activity designed to ensure that group object has at least one assigned Full Time Employee owner. This policy...Globus CB: Group project 2009-2010Highlighterr for Visual C++ 2010: A simple code syntax highlighter to change the colors of classes, structs, interfaces, macros and typedefs in the Visual C++ 2010 IDE. It is implem...HTML to word (.doc): easy to export your HTML code to Microsoft Word (.doc extension)IETT Hat Güzergah Importer: http://www.iett.gov.tr sitesinden otobüs hat ve güzergahlarını indirerek RegEx ile parse eder. Elde ettiği verileri SQL Server'a kaydeder.Industrial Dashboard: WCF service that allows executing SQL Server stored procedures straight from javascript code, enabling sending and receiving structured data withou...iSafePDF: iSafePDF is a PDF protection software. it allows you to encrypt PDF document, signe them using a certificate and timestamp the signature. all those...Kordinat Dönüştürücü: * UTM Koordinatlardan DDD koordinatlara iki yönlü dönüşüm. * Google Earth üzerinde koordinat, polygon ve ruhsat gösterimi. * Türkiye Paftalarının...LinkedIn® for Windows Mobile: LinkedIn® for Windows Mobile brings your LinkedIn® account to your Window Mobile powered phone. See networkupdates / connections / profile etc. Macrosome: An F# project demonstrates recording and replaying user operations.Markov Text Generator: Markov Text Generator.MEFedMVVM: Library for building MEF MVVM applications for Silverlight and WPF. By using this library you can easily build MVVM application. *UNDER Constructi...Mercurial to Team Foundation Server Work Item Hook: This is a Mercurial hook that will mark Team Foundation Server work items as resolved with a specific format in the commit description.Metaball WPF HLSL: Metaballs in WPF 3 with pixel shaders.Project Audiophile: Project Audiophile is a suite of applications and libraries built for .Net and Mono for the purposes of listening and organising music.RSS Application Updater: A Libbrary that helps you to update your app from your web site's feed. works very good with drupal .Sherwood Content Management Suite: A project that aims to provide a powerful and flexible tool for aggregating data from different data sources. Add your own plugins to store wanted ...Sonic.Net: Sonic.Net is a .Net Library designed to facilitate development of rich client applications both in Silverlight and WPF. Sonic.Net makes use of all ...StoichiometriCS: Stoichiometric Chemical Equation Solver.Vate Game Engine: Vate is a new XNA Game Engine. For more information about this project, please visit http://blog.aphysoft.com.Yahoo OpenID YQL Demo: This is demo program how to use Yahoo OpenID and Yahoo Query Language (YQL)New ReleasesBasic Sprite Sheet Creator: Sprite Tool V1.11: I had a small error when using multiple animations without the one pixel border that I overlooked when rewriting the code. It should be completely ...Braintree Client Library: Braintree-2.0.0: Updated IsSuccess() on transaction results to return false on declined transactions Search results now implement IEnumerable and will automatical...BV Commerce 5 Import Export Tools: Version 5.7.0 (for BV Commerce 5.7): Updated version compatible with BV Commerce 5.7. Do not use on earlier versions.Chemistry Add-in for Word: Chemistry Add-in for Word Beta 2: This is the source code release of the Chemistry Add-in for Word Beta 2. System Requirements To run this software, you’ll need the following: Wind...Controlled Vocabulary: 1.0.0.5: System Requirements Outlook 2007 / 2010 .Net Framework 3.5 VSTO 2010 Runtime Installation 1. Close Outlook (Use Task Manager to ensure no running ...DotNetNuke® Store: 02.01.33 RC: What's New in this release? Bugs corrected: - Fixed a bug related to encryption cookie. New Features: - Adden token pair [IFLOGGED] [/IFLOGGED] us...EdiliOS: Beta 0.2.1: Aggiunto supporto a FidoCadJ, editor FidoCad multipiattaforma di Davide Bucci, con Libreria di Ingegneria Civile integrata.Event Scavenger: Admin tool Version 3.1.1: Fixed the Admin tool that fails on editing general settings. Only Admin tool is affected.Exceptional Visualizer: Exception Visualizer: A Debugger Visualizer to help with long chains of exceptions where digging through the inner exceptions is hard to do. Specifically, this release ...fracback: Binaries: Use at your own riskFree Silverlight & WPF Chart Control - Visifire: Visifire for SL 4 and WPF Charts 3.5.1 Released: Hi, This release contains fix for the following bug: Chart threw exception with DateTime axis if IntervalType property was set as ‘Minutes’ in Ax...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight and WPF Charts 3.0.8 Released: Hi, This release contains fix for the following bug: * Chart threw exception with DateTime axis if IntervalType property was set as ‘Minutes’...GeoUtility Library: GeoUtility Library 3.1.5.0: Please Note: This is an open source version. The commercial version offers much more functionality. Help files (english/german) are only available ...Highlighterr for Visual C++ 2010: Highlighterr for Visual C++ 2010 Test Release 1.0: To install the extension, download the and then double-click on the Highlighterr.vsix file. This should bring up a dialog saying something about wh...Highlighterr for Visual C++ 2010: Highlighterr for Visual C++ 2010 Test Release 1.01: The lack of support for /* */ comments was annoying me, so I added it. To install the extension, download the and then double-click on the Highlig...Home Access Plus+: v4.0.1.0: v4.0.1.0 Beta Change Log: Fixed an issue with laptops and the booking system (CSS and code fixes) Moved filters to top Added some Javascript to...HTML to word (.doc): FullSourceDownload: the full source contain: bin/AppWebdx7wusqu.dll Default.aspx htw.ascx htw.ascx.vb Web.configIndustrial Dashboard: 3.0 Beta: Added Example with Dojox.DataGrid Added Example with Ext.js ChartiSafePDF: iSafePDF v1.2: This is the first public release, this version support : PDF signature, timestamped signature, multi-signature, PDF encryption and meta-data modifi...linq.js - LINQ for JavaScript: ver 2.0.0.0: all code rewrite from scratch. enumerator support Dispose. namespace changed E, Linq.Enumerable -> Enumerable delete methods ToJSON ToTable Trace...LogikBug's IoC Container: Third Release: This project is dependent upon Microsoft.Practices.ServiceLocation and must be referenced when referencing LogikBug.Injection. Click here to view d...Macrosome: 0.0.1 preview: Key pointsOnly mouse clicks supported Just for preview: not stable How to useStart from Macrosome.Wpf.exe Click "Record" button will start oper...Mercurial to Team Foundation Server Work Item Hook: Version 0.1: This is the first version of the Mercurial to Team Foundation Server hook. It currently supports only adding comments to existing work items.MOSSDAL: MOSS Data Access Layer for data from the Sharepoint Lists Service: MOSSDAL Silverlight Framework Release 1: This is the first release of MOSSDAL for silverlight. For the MOSSDAL Framework for .NET release 1 click hereMOSSDAL: MOSS Data Access Layer for data from the Sharepoint Lists Service: MOSSDAL Silverlight Sample Release 1: This is the first release of the MOSSDAL framework samples for Silverlight. For the MOSSDAL .NET Release 1 Sample click hereMyWSAT - ASP.NET Membership Administration Tool: MyWSAT v3.5.1: MyWSAT 3.5.1 Update Notes - April 23rd 2010 1.) Fixed standard profile problem in web.config as well as on all the forms the profiles are used. The...NetPE: NetPE v1.0: Initial Release of NetPE. Features: -View & Editing Portable Executable -Hex editor -Full Metadata Support -Disassemble Cil/x86 codeNSIS Autorun: NSIS Autorun 0.1.1: NSIS Autorun 0.1.1 This release includes source code, application binary, and example materials.Over Store: OverStore Release 1.17.0.0: Version 1.17.0.0 - AdoNetStorage: AdoNetStorage refactored. Detailed Log messages added on each event. Database resource management moved to A...RoTwee: RoTwee (11.0.0.3): Fix for "17385 Remove saved degree val from code"Silverlight 4.0 Popup Menu: Popup Menu for Silverlight 4.0: This is the first project release. Added drop shadow and fade in effects. Left click and hover events are also supported.Silverlight 4.0 Popup Menu: Popup menu for Silverlight 4.0 Version 0.8: - Placed the invoker for the 'Opening' event handler within a dispatcher. This ensures that the visual tree is created before it is accessed.sNPCedit: sNPCedit v0.9: + Some changes in GUI and Behaviour + Added: Search functionSonic.Net: Sonic.Net v1.0.0: Sonic.Net v1.0.0 Targets Net 3.5 sp1 and Sinverlight 3 Includes: sonic.UnityConfiguration.Silverlight sonic.UnityConfiguration.WpfSurvey - web survey & form engine: Survey™ 1.2.1: Survey™ 1.2.1 release (based on the original Nsurvey 1.9.1. source files) New Features & fixes: 1. Final bits of code rewritten to become 100% ...SysPad: 4.10.10.2: Release Notes A folder management and scratchpad utility; especially useful in a business network setting that utilizes numerous, commonly used fol...Third Hand - Use your voice to control Visual Studio: Update for VS2010: Added support for VS2010, and minor improvements when using the grid.TiledLib: TiledLib 1.2: - Added overload of Map.Draw that specifies the area to draw - Added demo of a camera control for a mapXMLPreprocess: 2.0.12: What's new in this release: This release contains a number of enhancements based on feedback given through the discussion forums and issue tracker....Xrns2XMod: Xrns2Xmod 0.8: Added >> Real preliminary sound conversion for XM >> Some code optimizations Note Some samples might not be converted due to a flac parsing error ...Yahoo OpenID YQL Demo: Yahoo YQL .Net Demo: This is a demo program for using YQL with C#.netYahoo OpenID YQL Demo: YQL Demo: This is a demo program using Yahoo YQL with C#.NetYahoo OpenID YQL Demo: YQLDemo using .Net: This is a demo program for using Yahoo YQL with C#.NetMost Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrBlogEngine.NETParticle Plot PivotNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDotNetZip LibraryGMap.NET - Great Maps for Windows Forms & Presentationturing machine simulatorIonics Isapi Rewrite Filterpatterns & practices: Composite WPF and Silverlight

  Read the article

• Understanding MotionEvent to implement a virtual DPad and Buttons on Android (Multitouch)

  - by Fabio Gomes

  I once implemented a DPad in XNA and now I'm trying to port it to android, put, I still don't get how the touch events work in android, the more I read the more confused I get. Here is the code I wrote so far, it works, but guess that it will only handle one touch point. public boolean onTouchEvent(MotionEvent event) { if (event.getPointerCount() == 0) return true; int touchX = -1; int touchY = -1; pressedDirection = DPadDirection.None; int actionCode = event.getAction() & MotionEvent.ACTION_MASK; if (actionCode == MotionEvent.ACTION_UP) { if (event.getPointerId(0) == idDPad) { pressedDirection = DPadDirection.None; idDPad = -1; } } else if (actionCode == MotionEvent.ACTION_DOWN || actionCode == MotionEvent.ACTION_MOVE) { touchX = (int)event.getX(); touchY = (int)event.getY(); if (rightRect.contains(touchX, touchY)) pressedDirection = DPadDirection.Right; else if (leftRect.contains(touchX, touchY)) pressedDirection = DPadDirection.Left; else if (upRect.contains(touchX, touchY)) pressedDirection = DPadDirection.Up; else if (downRect.contains(touchX, touchY)) pressedDirection = DPadDirection.Down; if (pressedDirection != DPadDirection.None) idDPad = event.getPointerId(0); } return true; } The logic is: Test if there is a "DOWN" or "MOVED" event, then if one of this events collides with one of the 4 rectangles of my DPad, I set the pressedDirectin variable to the side of the touch event, then I read the DPad actual pressed direction in my Update() event on another class. The thing I'm not sure, is how do I get track of the touch points, I store the ID of the touch point which generated the diretion that is being stored (last one), so when this ID is released I set the Direction to None, but I'm really confused about how to handle this in android, here is the code I had in XNA: public override void Update(GameTime gameTime) { PressedDirection = DpadDirection.None; foreach (TouchLocation _touchLocation in TouchPanel.GetState()) { if (_touchLocation.State == TouchLocationState.Released) { if (_touchLocation.Id == _idDPad) { PressedDirection = DpadDirection.None; _idDPad = -1; } } else if (_touchLocation.State == TouchLocationState.Pressed || _touchLocation.State == TouchLocationState.Moved) { _intersectRect.X = (int)_touchLocation.Position.X; _intersectRect.Y = (int)_touchLocation.Position.Y; _intersectRect.Width = 1; _intersectRect.Height = 1; if (_intersectRect.Intersects(_rightRect)) PressedDirection = DpadDirection.Right; else if (_intersectRect.Intersects(_leftRect)) PressedDirection = DpadDirection.Left; else if (_intersectRect.Intersects(_upRect)) PressedDirection = DpadDirection.Up; else if (_intersectRect.Intersects(_downRect)) PressedDirection = DpadDirection.Down; if (PressedDirection != DpadDirection.None) { _idDPad = _touchLocation.Id; continue; } } } base.Update(gameTime); } So, first of all: Am I doing this correctly? if not, why? I don't want my DPad to handle multiple directions, but I still didn't get how to handle the multiple touch points, is the event called for every touch point, or all touch points comes in a single call? I still don't get it.

  Read the article

• OWB 11gR2 &ndash; OLAP and Simba

  - by David Allan

  Oracle Warehouse Builder was the first ETL product to provide a single integrated and complete environment for managing enterprise data warehouse solutions that also incorporate multi-dimensional schemas. The OWB 11gR2 release provides Oracle OLAP 11g deployment for multi-dimensional models (in addition to support for prior releases of OLAP). This means users can easily utilize Simba's MDX Provider for Oracle OLAP (see here for details and cost) which allows you to use the powerful and popular ad hoc query and analysis capabilities of Microsoft Excel PivotTables® and PivotCharts® with your Oracle OLAP business intelligence data. The extensions to the dimensional modeling capabilities have been built on established relational concepts, with the option to seamlessly move from a relational deployment model to a multi-dimensional model at the click of a button. This now means that ETL designers can logically model a complete data warehouse solution using one single tool and control the physical implementation of a logical model at deployment time. As a result data warehouse projects that need to provide a multi-dimensional model as part of the overall solution can be designed and implemented faster and more efficiently. Wizards for dimensions and cubes let you quickly build dimensional models and realize either relationally or as an Oracle database OLAP implementation, both 10g and 11g formats are supported based on a configuration option. The wizard provides a good first cut definition and the objects can be further refined in the editor. Both wizards let you choose the implementation, to deploy to OLAP in the database select MOLAP: multidimensional storage. You will then be asked what levels and attributes are to be defined, by default the wizard creates a level bases hierarchy, parent child hierarchies can be defined in the editor. Once the dimension or cube has been designed there are special mapping operators that make it easy to load data into the objects, below we load a constant value for the total level and the other levels from a source table.   Again when the cube is defined using the wizard we can edit the cube and define a number of analytic calculations by using the 'generate calculated measures' option on the measures panel. This lets you very easily add a lot of rich analytic measures to your cube. For example one of the measures is the percentage difference from a year ago which we can see in detail below. You can also add your own custom calculations to leverage the capabilities of the Oracle OLAP option, either by selecting existing template types such as moving averages to defining true custom expressions. The 11g OLAP option now supports percentage based summarization (the amount of data to precompute and store), this is available from the option 'cost based aggregation' in the cube's configuration. Ensure all measure-dimensions level based aggregation is switched off (on the cube-dimension panel) - previously level based aggregation was the only option. The 11g generated code now uses the new unified API as you see below, to generate the code, OWB needs a valid connection to a real schema, this was not needed before 11gR2 and is a new requirement since the OLAP API which OWB uses is not an offline one. Once all of the objects are deployed and the maps executed then we get to the fun stuff! How can we analyze the data? One option which is powerful and at many users' fingertips is using Microsoft Excel PivotTables® and PivotCharts®, which can be used with your Oracle OLAP business intelligence data by utilizing Simba's MDX Provider for Oracle OLAP (see Simba site for details of cost). I'll leave the exotic reporting illustrations to the experts (see Bud's demonstration here), but with Simba's MDX Provider for Oracle OLAP its very simple to easily access the analytics stored in the database (all built and loaded via the OWB 11gR2 release) and get the regular features of Excel at your fingertips such as using the conditional formatting features for example. That's a very quick run through of the OWB 11gR2 with respect to Oracle 11g OLAP integration and the reporting using Simba's MDX Provider for Oracle OLAP. Not a deep-dive in any way but a quick overview to illustrate the design capabilities and integrations possible.

  Read the article

• Ask the Readers: Backing Your Files Up – Local Storage versus the Cloud

  - by Asian Angel

  Backing up important files is something that all of us should do on a regular basis, but may not have given as much thought to as we should. This week we would like to know if you use local storage, cloud storage, or a combination of both to back your files up. Photo by camknows. For some people local storage media may be the most convenient and/or affordable way to back up their files. Having those files stored on media under your control can also provide a sense of security and peace of mind. But storing your files locally may also have drawbacks if something happens to your storage media. So how do you know whether the benefits outweigh the disadvantages or not? Here are some possible pros and cons that may affect your decision to use local storage to back up your files: Local Storage Pros You are in control of your data Your files are portable and can go with you when needed if using external or flash drives Files are accessible without an internet connection You can easily add more storage capacity as needed (additional drives, etc.) Cons You need to arrange room for your storage media (if you have multiple externals drives, etc.) Possible hardware failure No access to your files if you forget to bring your storage media with you or it is too bulky to bring along Theft and/or loss of home with all contents due to circumstances like fire If you are someone who is always on the go and needs to travel as lightly as possible, cloud storage may be the perfect way for you to back up and access your files. Perhaps your laptop has a hard-drive failure or gets stolen…unhappy events to be sure, but you will still have a copy of your files available. Perhaps a company wants to make sure their records, files, and other information are backed up off site in case of a major hardware or system failure…expensive and/or frustrating to fix if it happens, but once again there is a nice backup ready to go once things are fixed. As with local storage, here are some possible pros and cons that may influence your choice of cloud storage to back up your files: Cloud Storage Pros No need to carry around flash or bulky external drives All of your files are accessible wherever there is an internet connection No need to deal with local storage media (or its’ upkeep) Your files are still safe if your home is broken into or other unfortunate circumstances occur Cons Your files and data are not 100% under your control Possible hardware failure or loss of files on the part of your cloud storage provider (this could include a disgruntled employee wreaking havoc) No access to your files if you do not have an internet connection The cloud storage provider may eventually shutdown due to financial hardship or other unforeseen circumstances The possibility of your files and data being stolen by hackers due to a security breach on the part of your cloud storage provider You may also prefer to try and cover all of the possibilities by using both local and cloud storage to back up your files. If something happens to one, you always have the other to fall back on. Need access to those files at or away from home? As long as you have access to either your storage media or an internet connection, you are good to go. Maybe you are getting ready to choose a backup solution but are not sure which one would work better for you. Here is your chance to ask your fellow HTG readers which one they would recommend. Got a great backup solution already in place? Then be sure to share it with your fellow readers! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know Winter Sunset by a Mountain Stream Wallpaper Add Sleek Style to Your Desktop with the Aston Martin Theme for Windows 7 Awesome WebGL Demo – Flight of the Navigator from Mozilla Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0

  Read the article

• Java Script – Content delivery networks (CDN) can bit you in the butt.

  - by Ryan Ternier

  As much as I love the new CDN’s that Google, Microsoft and a few others have publically released, there are some strong gotchas that could come up and bite you in the ass if you’re not careful. But before we jump into that, for those that are not 100% sure what a CDN is (besides Canadian).   Content Delivery Network. A way of distributing your static content across various servers in different physical locations.  Because this static content is stored on many servers around the world, whenever a user needs to access this content, they are given the closest server to their location for this data. Already you can probably see the immediate bonuses to a system like this: Lower bandwidth Even small script files downloaded thousands of times will start to take a noticeable hit on your bandwidth meter. Less connections/hits to your web server which gives better latency If you manage many servers, you don’t need to manually update each server with scripts. A user will download a script for each website they visit. If a user is redirected to many domains/sub-domains within your web site, they might download many copies of the same file. When a system sees multiple requests from the same  domain, they will ignore the download   Those are just a handful of the many bonuses a CDN will give you. And for the average website, a CDN is great choice. Check out the following CDN links for their solutions: Google AJAX Library: http://code.google.com/apis/ajaxlibs/ Microsoft Ajax library: http://www.asp.net/ajaxlibrary/cdn.ashx The Gotcha There is always a catch. Here are some issues I found with using CDN’s that hopefully can help you make your decision. HTTP / HTTPS If you are running a website behind SSL, make sure that when you reference your CDN data that you use https:// vs. http://. If you forget this users will get a very nice message telling them that their secure connection is trying to access unsecure data. For a developer this is fairly simple, but general users will get a bit anxious when seeing this. Trusted Sites Internet Explorer has this really nifty feature that allows users to specify what sites they trust, and by some defaults IE7 only allows trusted sites to be viewed.  No problem, they set your website as trusted. But what about your CDN? If a user sets your websites to trusted, but not the CDN, they will not download those static files. This has the potential to totally break your web site. Pedantic Network Admins This alone is sometimes the killer of projects. However, always be careful when you are going to use a CDN for a professional project. If a network / security admin sees that you’re referencing an outside source, or that a call from a website might hit an outside domain.. panties will be bunched, emails will be spewed out and well, no one wants that.

  Read the article

• Managing User & Role Security with Oracle SQL Developer

  - by thatjeffsmith

  With the advent of SQL Developer v3.0, users have had access to some powerful database administration features. Version 3.1 introduced more powerful features such as an interface to Data Pump and RMAN. Today I want to talk about some very simple but frequently ran tasks that SQL Developer can assist with, like: identifying privs granted to users managing role privs assigning new roles and privs to users & roles Before getting started, you’ll need a connection to the database with the proper privileges. The common ROLE used to accomplish this is the ‘DBA‘ role. Curious as to what the DBA role is actually comprised of? Let’s find out! Open the DBA Console First make sure you’re connected to the database you want to manage security on with a privileged administrator account. Then open the View menu and select ‘DBA.’ Accessing the DBA panel ‘Create’ a Connection Click on the green ‘+’ button in the DBA panel. It will ask you to choose a previously defined SQL Developer connection. Defining a DBA connection in Oracle SQL Developer Once connected you will see a tree list of DBA features you can start interacting with. Expand the ‘Security’ Tree Node As you click on an object in the DBA panel, the ‘viewer’ will open on the right-hand-side, just like you are accustomed to seeing when clicking on a table or stored procedure. Accessing the DBA role If I’m a newly hired Oracle DBA, the first thing I might want to do is become very familiar with the DBA role. People will be asking you to grant them this role or a subset of its privileges. Once you see what the role can do, you will become VERY protective of it. My favorite 3-letter 4-letter word is ‘ANY’ and the DBA role is littered with privileges like this: ANY TABLE privs granted to DBA role So if this doesn’t freak you out, then maybe you should re-consider your career path. Or in other words, don’t be granting this role to ANYONE you don’t completely trust to take care of your database. If I’m just assigned a new database to manage, the first thing I might want to look at is just WHO has been assigned the DBA role. SQL Developer makes this easy to ascertain, just click on the ‘User Grantees’ panel. Who has the keys to your car? Making Changes to Roles and Users If you mouse-right-click on a user in the Tree, you can do individual tasks like grant a sys priv or expire an account. But, you can also use the ‘Edit User’ dialog to do a lot of work in one pass. As you click through options in these dialogs, it will build the ‘ALTER USER’ script in the SQL panel, which can then be executed or copied to the worksheet or to your .SQL file to be ran at your discretion. A Few Clicks vs a Lot of Typing These dialogs won’t make you a DBA, but if you’re pressed for time and you’re already in SQL Developer, they can sure help you make up for lost time in just a few clicks!

  Read the article

• New security options in UCM Patch Set 3

  - by kyle.hatlestad

  While the Patch Set 3 (PS3) release was mostly focused on bug fixes and such, some new features sneaked in there. One of those new features is to the security options. In 10gR3 and prior versions, UCM had a component called Collaboration Manager which allowed for project folders to be created and groups of users assigned as members to collaborate on documents. With this component came access control lists (ACL) for content and folders. Users could assign specific security rights on each and every document and folder within a project. And it was even possible to enable these ACL's without having the Collaboration Manager component enabled (see technote# 603148.1). When 11g came out, Collaboration Manager was no longer available. But the configuration settings to turn on ACLs were still there. Well, in PS3 they're implemented slightly differently. And there is a new component available which adds an additional dimension to define security on the object, Roles. So now instead of selecting individual users or groups of users (defined as an Alias in User Admin), you can select a particular role. And if a user has that role, they are granted that level of access. This can allow for a much more flexible and manageable security model instead of trying to manage with just user and group access as people come and go in the organization. The way that it is enabled is still through configuration entries. First log in as an administrator and go to Administration -> Admin Server. On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top. In the list of Disabled Components, enable the RoleEntityACL component. Then click the General Configuration link on the left. In the Additional Configuration Variables text area, enter the new configuration values: UseEntitySecurity=true SpecialAuthGroups=<comma separated list of Security Groups to honor ACLs> The SpecialAuthGroups should be a list of Security Groups that honor the ACL fields. If an ACL is applied to a content item with a Security Group outside this list, it will be ignored. Save the settings and restart the instance. Upon restart, three new metadata fields will be created: xClbraUserList, xClbraAliasList, xClbraRoleList. If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. On the Check In, Search, and Update pages, values are added by simply typing in the value and getting a type-ahead list of possible values. Select the value, click Add and then set the level of access (Read, Write, Delete, or Admin). If all of the fields are blank, then it simply falls back to just Security Group and Account access. For Users and Groups, these values are automatically picked up from the corresponding database tables. In the case of Roles, this is an explicitly defined list of choices that are made available. These values must match the role that is being defined from WebLogic Server or you LDAP/AD repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager. On the Views tab, edit the values for the ExternalRolesView. By default, 'guest' and 'authenticated' are added. Once added to through the view, they will be available to select from for the Roles Access List. As for how they are stored in the metadata fields, each entry starts with it's identifier: ampersand (&) symbol for users, "at" (@) symbol for groups, and colon (:) for roles. Following that is the entity name. And at the end is the level of access in paranthesis. e.g. (RWDA). And each entry is separated by a comma. So if you were populating values through batch loader or an external source, the values would be defined this way. Detailed information on Access Control Lists can be found in the Oracle Fusion Middleware System Administrator's Guide for Oracle Content Server.

  Read the article

• How to use caching to increase render performance?

  - by Christian Ivicevic

  First of all I am going to cover the basic design of my 2d tile-based engine written with SDL in C++, then I will point out what I am up to and where I need some hints. Concept of my engine My engine uses the concept of GameScreens which are stored on a stack in the main game class. The main methods of a screen are usually LoadContent, Render, Update and InitMultithreading. (I use the last one because I am using v8 as a JavaScript bridge to the engine. The main game loop then renders the top screen on the stack (if there is one; otherwise, it exits the game) - actually it calls the render methods, but stores all items to be rendered in a list. After gathering all this information the methods like SDL_BlitSurface are called by my GameUIRenderer which draws the enqueued content and then draws some overlay. The code looks like this: while(Game is running) { Handle input if(Screens on stack == 0) exit Update timer etc. Clear the screen Peek the screen on the stack and collect information on what to render Actually render the enqueue screen stuff and some overlay etc. Flip the screen } The GameUIRenderer uses as hinted a std::vector<std::shared_ptr<ImageToRender>> to hold all necessary information described by this class: class ImageToRender { private: SDL_Surface* image; int x, y, w, h, xOffset, yOffset; }; This bunch of attributes is usually needed if I have a texture atlas with all tiles in one SDL_Surface and then the engine should crop one specific area and draw this to the screen. The GameUIRenderer::Render() method then just iterates over all elements and renders them something like this: std::for_each( this->m_vImageVector.begin(), this->m_vImageVector.end(), [this](std::shared_ptr<ImageToRender> pCurrentImage) { SDL_Rect rc = { pCurrentImage->x, pCurrentImage->y, 0, 0 }; // For the sake of simplicity ignore offsets... SDL_Rect srcRect = { 0, 0, pCurrentImage->w, pCurrentImage->h }; SDL_BlitSurface(pCurrentImage->pImage, &srcRect, g_pFramework->GetScreen(), &rc); } ); this->m_vImageVector.clear(); Current ideas which need to be reviewed The specified approach works really good and IMHO it is really has a good structure, however the performance could be definitely increased. I would like to know what do you suggest, how to implement efficient caching of surfaces etc so that there is no need to redraw the same scene over and over again? The map itself would be almost static, only when the player moves, we would need to move the map. Furthermore animated entities would either require updates of the whole map or updates of only the specific areas the entities are currently moving in. My first approaches were to include a flag IsTainted which should be used by the GameUIRenderer to decide whether to redraw everything or use cached version (or to not render anything so that we do not have to Clear the screen and let the last frame persist). However this seems to be quite messy if I have to manually handle in my Render method of the screen class if something has changed or not.

  Read the article

• Major Analyst Report Chooses Oracle As An ECM Leader

  - by brian.dirking(at)oracle.com

  Oracle announced that Gartner, Inc. has named Oracle as a Leader in its latest "Magic Quadrant for Enterprise Content Management" in a press release issued this morning. Gartner's Magic Quadrant reports position vendors within a particular quadrant based on their completeness of vision and ability to execute. According to Gartner, "Leaders have the highest combined scores for Ability to Execute and Completeness of Vision. They are doing well and are prepared for the future with a clearly articulated vision. In the context of ECM, they have strong channel partners, presence in multiple regions, consistent financial performance, broad platform support and good customer support. In addition, they dominate in one or more technology or vertical market. Leaders deliver a suite that addresses market demand for direct delivery of the majority of core components, though these are not necessarily owned by them, tightly integrated, unique or best-of-breed in each area. We place more emphasis this year on demonstrated enterprise deployments; integration with other business applications and content repositories; incorporation of Web 2.0 and XML capabilities; and vertical-process and horizontal-solution focus. Leaders should drive market transformation." "To extend content governance and best practices across the enterprise, organizations need an enterprise content management solution that delivers a broad set of functionality and is tightly integrated with business processes," said Andy MacMillan, vice president, Product Management, Oracle. "We believe that Oracle's position as a Leader in this report is recognition of the industry-leading performance, integration and scalability delivered in Oracle Enterprise Content Management Suite 11g." With Oracle Enterprise Content Management Suite 11g, Oracle offers a comprehensive, integrated and high-performance content management solution that helps organizations increase efficiency, reduce costs and improve content security. In the report, Oracle is grouped among the top three vendors for execution, and is the furthest to the right, placing Oracle as the most visionary vendor. This vision stems from Oracle's integration of content management right into key business processes, delivering content in context as people need it. Using a PeopleSoft Accounts Payable user as an example, as an employee processes an invoice, Oracle ECM Suite brings that invoice up on the screen so the processor can verify the content right in the process, improving speed and accuracy. Oracle integrates content into business processes such as Human Resources, Travel and Expense, and others, in the major enterprise applications such as PeopleSoft, JD Edwards, Siebel, and E-Business Suite. As part of Oracle's Enterprise Application Documents strategy, you can see an example of these integrations in this webinar: Managing Customer Documents and Marketing Assets in Siebel. You can also get a white paper of the ROI Embry Riddle achieved using Oracle Content Management integrated with enterprise applications. Embry Riddle moved from a point solution for content management on accounts payable to an infrastructure investment - they are now using Oracle Content Management for accounts payable with Oracle E-Business Suite, and for student on-boarding with PeopleSoft e-Campus. They continue to expand their use of Oracle Content Management to address further use cases from a core infrastructure. Oracle also shows its vision in the ability to deliver content optimized for online channels. Marketers can use Oracle ECM Suite to deliver digital assets and offers as part of an integrated campaign that understands website visitors and ensures that they are given the most pertinent information and offers. Oracle also provides full lifecycle management through its built-in records management. Companies are able to manage the lifecycle of content (both records and non-records) through built-in retention management. And with the integration of Oracle ECM Suite and Sun Storage Archive Manager, content can be routed to the appropriate storage media based upon content type, usage data or other business rules. This ensures that the most accessed content is instantly available, and archived content is stored on a more appropriate medium like tape. You can learn more in this webinar - Oracle Content Management and Sun Tiered Storage. If you are interested in reading more about why Oracle was chosen as a Leader, view the Gartner Magic Quadrant for Enterprise Content Management.

  Read the article

• WCF RIA Services DomainContext Abstraction Strategies–Say That 10 Times!

  - by dwahlin

  The DomainContext available with WCF RIA Services provides a lot of functionality that can help track object state and handle making calls from a Silverlight client to a DomainService. One of the questions I get quite often in our Silverlight training classes (and see often in various forums and other areas) is how the DomainContext can be abstracted out of ViewModel classes when using the MVVM pattern in Silverlight applications. It’s not something that’s super obvious at first especially if you don’t work with delegates a lot, but it can definitely be done. There are various techniques and strategies that can be used but I thought I’d share some of the core techniques I find useful. To start, let’s assume you have the following ViewModel class (this is from my Silverlight Firestarter talk available to watch online here if you’re interested in getting started with WCF RIA Services): public class AdminViewModel : ViewModelBase { BookClubContext _Context = new BookClubContext(); public AdminViewModel() { if (!DesignerProperties.IsInDesignTool) { LoadBooks(); } } private void LoadBooks() { _Context.Load(_Context.GetBooksQuery(), LoadBooksCallback, null); } private void LoadBooksCallback(LoadOperation<Book> books) { Books = new ObservableCollection<Book>(books.Entities); } } Notice that BookClubContext is being used directly in the ViewModel class. There’s nothing wrong with that of course, but if other ViewModel objects need to load books then code would be duplicated across classes. Plus, the ViewModel has direct knowledge of how to load data and I like to make it more loosely-coupled. To do this I create what I call a “Service Agent” class. This class is responsible for getting data from the DomainService and returning it to a ViewModel. It only knows how to get and return data but doesn’t know how data should be stored and isn’t used with data binding operations. An example of a simple ServiceAgent class is shown next. Notice that I’m using the Action<T> delegate to handle callbacks from the ServiceAgent to the ViewModel object. Because LoadBooks accepts an Action<ObservableCollection<Book>>, the callback method in the ViewModel must accept ObservableCollection<Book> as a parameter. The callback is initiated by calling the Invoke method exposed by Action<T>: public class ServiceAgent { BookClubContext _Context = new BookClubContext(); public void LoadBooks(Action<ObservableCollection<Book>> callback) { _Context.Load(_Context.GetBooksQuery(), LoadBooksCallback, callback); } public void LoadBooksCallback(LoadOperation<Book> lo) { //Check for errors of course...keeping this brief var books = new ObservableCollection<Book>(lo.Entities); var action = (Action<ObservableCollection<Book>>)lo.UserState; action.Invoke(books); } } This can be simplified by taking advantage of lambda expressions. Notice that in the following code I don’t have a separate callback method and don’t have to worry about passing any user state or casting any user state (the user state is the 3rd parameter in the _Context.Load method call shown above). public class ServiceAgent { BookClubContext _Context = new BookClubContext(); public void LoadBooks(Action<ObservableCollection<Book>> callback) { _Context.Load(_Context.GetBooksQuery(), (lo) => { var books = new ObservableCollection<Book>(lo.Entities); callback.Invoke(books); }, null); } } A ViewModel class can then call into the ServiceAgent to retrieve books yet never know anything about the DomainContext object or even know how data is loaded behind the scenes: public class AdminViewModel : ViewModelBase { ServiceAgent _ServiceAgent = new ServiceAgent(); public AdminViewModel() { if (!DesignerProperties.IsInDesignTool) { LoadBooks(); } } private void LoadBooks() { _ServiceAgent.LoadBooks(LoadBooksCallback); } private void LoadBooksCallback(ObservableCollection<Book> books) { Books = books } } You could also handle the LoadBooksCallback method using a lambda if you wanted to minimize code just like I did earlier with the LoadBooks method in the ServiceAgent class.  If you’re into Dependency Injection (DI), you could create an interface for the ServiceAgent type, reference it in the ViewModel and then inject in the object to use at runtime. There are certainly other techniques and strategies that can be used, but the code shown here provides an introductory look at the topic that should help get you started abstracting the DomainContext out of your ViewModel classes when using WCF RIA Services in Silverlight applications.

  Read the article

• Your Job Search Should be More Than Just a New Year's Resolution

  - by david.talamelli

  I love the beginning of a new year, it is a great chance to refocus and either re-evaluate goals you are working to or even set new ones. I don't have any statistics to measure this but I am sure that one of the more popular new year's resolutions in the general workforce is to either get a new job or work to further develop one's career. I think this is a good idea, in today's competitive work force people should have a plan of what they want to do, what role they are after and how to get there. One common mistake I think many people make though is that a career plan shouldn't be a once a year thought. When people finish with the holiday season with their new year's resolution to find a new job fresh in their mind, you can see the enthusiasm and motivation a person has to make something happen. Emails are sent, calls are made, applications are made, networking is happening, etc..... Finding the right role that you are after however can be difficult, while it would be great if that dream role was available just at the time you happened to be looking for it - in reality this is not always the case. Job Seekers need to keep reminding themselves that while sometimes that dream job they are after is available at the same time they are looking, that also a Job search can be a difficult and long process. Many people who set out with the best of intentions in January to find a new job can soon lose interest in a job search if they do not immediately find a role. Just like the Christmas decorations are put away and the photos from New Year's are stored away - a Job Seeker's motivation may slowly decrease until that person finds themselves 12 months later in the same situation in same role and looking for that new opportunity again. Rather than just "going for it" and looking for a role in the month of January, a person's job search or career plan should be an ongoing activity and thought process that is constantly updated and evaluated over the course of the year. It can be hard to stay motivated over an extended period of time, especially when you are newly motivated and ready for that new role and the results are not immediate. Rather than letting your job search fall down the priority list and into the "too hard basket" a few ideas that may keep your enthusiasm fresh Update your resume every 6 months, even if you are not looking for a job - it is easy to forget what you have accomplished if you don't keep your details updated. Also it is good to be prepared and have a resume ready to go in case you do get an unexpected phone call for that 'dream job' you have been hoping for. Work out what you want out of your next role before you begin your job search - rather than aimlessly searching job ads or talking to people - think of the organisations or type of role you would like before you search. If you know what you are looking for it will be much easier to work out how to get there than if you do not know what you want. Don't expect immediate results once you decide to look for another job, things don't always fall into place. Timing and delivery can be important pieces of being selected for a role, companies don't hire every role in January. Have an open mind - people you meet or talk to may not result in immediate results for your job search but every connection may help you get a bit closer to what you are after . These actions will not guarantee a positive result, but in today's competitive work force every little of extra preparation and planning helps. All the best for 2011 and I hope your career plan whatever it may be is a success.

  Read the article

• Migrating SQL Server Databases – The DBA’s Checklist (Part 3)

  - by Sadequl Hussain

  Continuing from Part 2 of the Database Migration Checklist series: Step 10: Full-text catalogs and full-text indexing This is one area of SQL Server where people do not seem to take notice unless something goes wrong. Full-text functionality is a specialised area in database application development and is not usually implemented in your everyday OLTP systems. Nevertheless, if you are migrating a database that uses full-text indexing on one or more tables, you need to be aware a few points. First of all, SQL Server 2005 now allows full-text catalog files to be restored or attached along with the rest of the database. However, after migration, if you are unable to look at the properties of any full-text catalogs, you are probably better off dropping and recreating it. You may also get the following error messages along the way: Msg 9954, Level 16, State 2, Line 1 The Full-Text Service (msftesql) is disabled. The system administrator must enable this service. This basically means full text service is not running (disabled or stopped) in the destination instance. You will need to start it from the Configuration Manager. Similarly, if you get the following message, you will also need to drop and recreate the catalog and populate it. Msg 7624, Level 16, State 1, Line 1 Full-text catalog ‘catalog_name‘ is in an unusable state. Drop and re-create this full-text catalog. A full population of full-text indexes can be a time and resource intensive operation. Obviously you will want to schedule it for low usage hours if the database is restored in an existing production server. Also, bear in mind that any scheduled job that existed in the source server for populating the full text catalog (e.g. nightly process for incremental update) will need to be re-created in the destination. Step 11: Database collation considerations Another sticky area to consider during a migration is the collation setting. Ideally you would want to restore or attach the database in a SQL Server instance with the same collation. Although not used commonly, SQL Server allows you to change a database’s collation by using the ALTER DATABASE command: ALTER DATABASE database_name COLLATE collation_name You should not be using this command for no reason as it can get really dangerous.  When you change the database collation, it does not change the collation of the existing user table columns.  However the columns of every new table, every new UDT and subsequently created variables or parameters in code will use the new setting. The collation of every char, nchar, varchar, nvarchar, text or ntext field of the system tables will also be changed. Stored procedure and function parameters will be changed to the new collation and finally, every character-based system data type and user defined data types will also be affected. And the change may not be successful either if there are dependent objects involved. You may get one or multiple messages like the following: Cannot ALTER ‘object_name‘ because it is being referenced by object ‘dependent_object_name‘. That is why it is important to test and check for collation related issues. Collation also affects queries that use comparisons of character-based data.  If errors arise due to two sides of a comparison being in different collation orders, the COLLATE keyword can be used to cast one side to the same collation as the other. Continues…

  Read the article

• Why Cornell University Chose Oracle Data Masking

  - by Troy Kitch

  One of the eight Ivy League schools, Cornell University found itself in the unfortunate position of having to inform over 45,000 University community members that their personal information had been breached when a laptop was stolen. To ensure this wouldn’t happen again, Cornell took steps to ensure that data used for non-production purposes is de-identified with Oracle Data Masking. A recent podcast highlights why organizations like Cornell are choosing Oracle Data Masking to irreversibly de-identify production data for use in non-production environments. Organizations often copy production data, that contains sensitive information, into non-production environments so they can test applications and systems using “real world” information. Data in non-production has increasingly become a target of cyber criminals and can be lost or stolen due to weak security controls and unmonitored access. Similar to production environments, data breaches in non-production environments can cost millions of dollars to remediate and cause irreparable harm to reputation and brand. Cornell’s applications and databases help carry out the administrative and academic mission of the university. They are running Oracle PeopleSoft Campus Solutions that include highly sensitive faculty, student, alumni, and prospective student data. This data is supported and accessed by a diverse set of developers and functional staff distributed across the university. Several years ago, Cornell experienced a data breach when an employee’s laptop was stolen.  Centrally stored backup information indicated there was sensitive data on the laptop. With no way of knowing what the criminal intended, the university had to spend significant resources reviewing data, setting up service centers to handle constituent concerns, and provide free credit checks and identity theft protection services—all of which cost money and took time away from other projects. To avoid this issue in the future Cornell came up with several options; one of which was to sanitize the testing and training environments. “The project management team was brought in and they developed a project plan and implementation schedule; part of which was to evaluate competing products in the market-space and figure out which one would work best for us.  In the end we chose Oracle’s solution based on its architecture and its functionality.” – Tony Damiani, Database Administration and Business Intelligence, Cornell University The key goals of the project were to mask the elements that were identifiable as sensitive in a consistent and efficient manner, but still support all the previous activities in the non-production environments. Tony concludes,  “What we saw was a very minimal impact on performance. The masking process added an additional three hours to our refresh window, but it was well worth that time to secure the environment and remove the sensitive data. I think some other key points you can keep in mind here is that there was zero impact on the production environment. Oracle Data Masking works in non-production environments only. Additionally, the risk of exposure has been significantly reduced and the impact to business was minimal.” With Oracle Data Masking organizations like Cornell can: Make application data securely available in non-production environments Prevent application developers and testers from seeing production data Use an extensible template library and policies for data masking automation Gain the benefits of referential integrity so that applications continue to work Listen to the podcast to hear the complete interview.  Learn more about Oracle Data Masking by registering to watch this SANS Institute Webcast and view this short demo.

  Read the article

• Why Haven’t NFC Payments Taken Off?

  - by David Dorf

  With the EMV 2015 milestone approaching rapidly, there’s been renewed interest in smartcards, those credit cards with an embedded computer chip.  Back in 1996 I was working for a vendor helping Visa introduce a stored-value smartcard to the US.  Visa Cash was debuted at the 1996 Olympics in Atlanta, and I firmly believed it was the beginning of a cashless society.  (I later worked on MasterCard’s system called Mondex, from the UK, which debuted the following year in Manhattan). But since you don’t have a Visa Cash card in your wallet, it’s obvious the project never took off.  It was convenient for consumers, faster for merchants, and more cost-effective for banks, so why did it fail?  All emerging payment systems suffer from the chicken-and-egg dilemma.  Consumers won’t carry the cards if few merchants accept them, and merchants won’t install the terminals if few consumers have cards. Today’s emerging payment providers are in a similar pickle.  There has to be enough value for all three constituents – consumers, merchants, banks – to change the status quo.  And it’s not enough to exceed the value, it’s got to be a leap in value, because people generally resist change.  ATMs and transit cards are great examples of this, and airline kiosks and self-checkout systems are to a lesser extent. Although Google Wallet and ISIS, the two leading NFC payment platforms in the US, have shown strong commitment, there’s been very little traction.  Yes, I can load my credit card number into my phone then tap to pay, but what was the incremental value over swiping my old card?  For it to be a leap in value, it has to offer more than just payment, which I can do very easily today.  The other two ingredients are thought to be loyalty programs and digital coupons, but neither Google nor ISIS really did them well. Of course a large portion of the mobile phone market doesn’t even support NFC thanks to Apple, and since it’s not in their best interest that situation is unlikely to change.  Another issue is getting access to the “secure element,” the chip inside the phone where accounts numbers can be held securely.  Telco providers and handset manufacturers own that area, and they’re not willing to share with banks.  (Host Card Emulation, which has been endorsed by MasterCard and Visa, might be a solution.) Square recently gave up on its wallet, and MCX (the group of retailers trying to create a mobile payment platform) is very slow out of the gate.  That leaves PayPal and a slew of smaller companies trying to introduce easier ways to pay. But is it really so cumbersome to carry and swipe (soon to insert) a credit card?  Aren’t there more important problems to solve in the retail customer experience?  Maybe Apple will come up with some novel way to use iBeacons and fingerprint identification to make payments, but for now I think we need to focus on upgrading to Chip-and-PIN and tightening security.  In the meantime, NFC payments will continue to struggle.

  Read the article

• Using Lambdas for return values in Rhino.Mocks

  - by PSteele

  In a recent StackOverflow question, someone showed some sample code they’d like to be able to use.  The particular syntax they used isn’t supported by Rhino.Mocks, but it was an interesting idea that I thought could be easily implemented with an extension method. Background When stubbing a method return value, Rhino.Mocks supports the following syntax: dependency.Stub(s => s.GetSomething()).Return(new Order()); The method signature is generic and therefore you get compile-time type checking that the object you’re returning matches the return value defined by the “GetSomething” method. You could also have Rhino.Mocks execute arbitrary code using the “Do” method: dependency.Stub(s => s.GetSomething()).Do((Func<Order>) (() => new Order())); This requires the cast though.  It works, but isn’t as clean as the original poster wanted.  They showed a simple example of something they’d like to see: dependency.Stub(s => s.GetSomething()).Return(() => new Order()); Very clean, simple and no casting required.  While Rhino.Mocks doesn’t support this syntax, it’s easy to add it via an extension method. The Rhino.Mocks “Stub” method returns an IMethodOptions<T>.  We just need to accept a Func<T> and use that as the return value.  At first, this would seem straightforward: public static IMethodOptions<T> Return<T>(this IMethodOptions<T> opts, Func<T> factory) { opts.Return(factory()); return opts; } And this would work and would provide the syntax the user was looking for.  But the problem with this is that you loose the late-bound semantics of a lambda.  The Func<T> is executed immediately and stored as the return value.  At the point you’re setting up your mocks and stubs (the “Arrange” part of “Arrange, Act, Assert”), you may not want the lambda executing – you probably want it delayed until the method is actually executed and Rhino.Mocks plugs in your return value. So let’s make a few small tweaks: public static IMethodOptions<T> Return<T>(this IMethodOptions<T> opts, Func<T> factory) { opts.Return(default(T)); // required for Rhino.Mocks on non-void methods opts.WhenCalled(mi => mi.ReturnValue = factory()); return opts; } As you can see, we still need to set up some kind of return value or Rhino.Mocks will complain as soon as it intercepts a call to our stubbed method.  We use the “WhenCalled” method to set the return value equal to the execution of our lambda.  This gives us the delayed execution we’re looking for and a nice syntax for lambda-based return values in Rhino.Mocks. Technorati Tags: .NET,Rhino.Mocks,Mocking,Extension Methods

  Read the article

• CodePlex Daily Summary for Tuesday, May 18, 2010

  CodePlex Daily Summary for Tuesday, May 18, 2010New ProjectsCafeControl: Supports Remote LOGIN,Remote logout ,Account Creation ,Account LOGOUT ,Temporary Login ,SMS Reported and many other features Requires .net 4.0 Cloud & Contacts: Cloud Contacts makes it easier for share your contacts.Cow connect: Ziel des Projektes Cow connect, ist es ein Tool zu schrieben das Verschiedene Datenbanken, unterschiedlicher Herdenmanagement Tool z.b: Helm Multik...DNN Simple Blog: A simplified blog module that adheres to the DNN API and is designed for a single blog author per module instance. The module also makes use of Web...dotSpatial: dotSpatial is an open source project focused on developing a core set of GIS and mapping libraries that live together harmoniously in the System.Sp...Dynamic Survey Forms - SharePoint Web Part: Create manage dynamic survey forms as SharePoint web part. Record survey score for logged user or for someone else. This project has been designed ...EDXL Sharp: EDXLSharp is a C# / .NET 3.5 implementation of the OASIS Emergency Data Exchange Language (EDXL) family of standards. This set of libraries can be...EPiServer CMS 6 Visual Studio Project Template for VB w/ Public Templates: This is a Visual Studio 2008 Project Template with will allow the creation of a EPiServer CMS 6 project set up as and with all code in Visual Basic...Functional Command Toolbar for Windows: A floating window with a text box for typing functional command and executing it. The tool supports .NET addin, functional scripting and other feat...GameFX: Silverlight Game Development LibraryLightweight Fluent Workflow: ObjectFlow is a lightweight workflow engine for creating & executing workflows. The fluent interface makes it easy to define and understand workf...LinqSpecs: A toolset for use the specification pattern in linq queries.Money Watch: Personal Finances management system written in C#, NHibernate and SQL express.Multi-screen Viewer: This viewer allows to open and view pdf file (presentation) on multiple screens. There is no need to see the file in fullscreen on each screen (mon...neo-tsql: set of stored procedures and functions for sql serverNHTrace: NHTrace is a tool for tracing sql commands executed by NHibernate with syntax highlighting.NQueue: NQueue provides an enterprise level work scheduling and execution framework and toolset that contains no single point of failure. Using a farm of s...Online Cash Manager: Online Cash Manager based on ASP .NET MVC2 VS 2010 RTM MVC 2POCO Bridge: Bridging Silverlight and full .NET apps.REngine - game engine in Silverlight: REngine makes it easier for game developers to develop games in Microsoft Silverlight. RunAs Launcher: RunAs Launcher is a C# utility that provides a GUI for running applications under different credentials. It works in situations where the built-in ...secs4net: SECS-II/GEM/HSMS implementation on .NET. This library provide easy way to communicate with SEMI standard compatible device.SharePoint Admin Dashboard: SharePoint Dashboard for admins. Allows lightening fast multiple server management. RDP doesn't scale. Manage 10 servers easier than 1 with i...Silver spring: saltSocial Map: Social map is a social network based on geograpghical informationTweetZone: TweetZone is new type of twitter client application include DATABASE in it, and it shows you STATS. This Application's cache makes it faster to acc...Yet Another Database Viewer: Yet Another Database Viewer is developed for a basic database view and editing so you don't have to install anything. It's developed in c#.New Releases3FD - Framework For Fast Development: Alpha 1: The first test release. There is still some bugs, but it is functional. The garbage collector is showing memory leaking that must be corrected in t...Ajax Toolkit for ASP.NET MVC: MvcAjaxToolkit gridext with ContextMenu and Tmpl: MvcAjaxToolkit gridext with ContextMenu and Tmpl gridext is a extension for flexigridASP.NET MVC Extensions: SP1 Preview: SP1 Preview ========= 1. Autofac support added. 2. Changed Windsor Adapter. IWindsorInstaller is used instead of IModule.Book Cataloger: BookCataloger1.0.7a: New Features: Author editor form prototype Improvements: .NET Framework 4.0 required Input checking improved Comment edit loads and saves text...Braintree Client Library: Braintree-2.2.0: Prevent race condition when pulling back collection results -- search results represent the state of the data at the time the query was run Renam...CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta 2: Documentation New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. Simplified test fixtures. Un-Refactored the not-so-simple MVP pa...dotNetTips: dotNetTips.Utility 3.5 R3: This is a new release (version 3.5.0.4) compatible with .NET 3.5. Requires SP1 if using the Entity Framework extensions. This is a minor update fro...Dynamic Survey Forms - SharePoint Web Part: Dynamic Survey forms for SharePoint. Alpha 1.0.1: Alpha release. Before running installer create database from script attached in zip file. In your web.config make sure your first connection strin...Event Scavenger: Viewer version 3.2.1: Added quick filters on event source and event id dialog boxes. Collector and Admin tool unaffected.Expression Blend Samples: Blend 4 Sketch Mockups Library: This library provides a set of commonly needed controls, icons and cursors to use in SketchFlow applications. After running the installer, create ...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.3: Fluent Ribbon Control Suite 1.3(supports .NET 3.5 and .NET 4 RTM) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples Found...Home Access Plus+: v4.2.2: Version 4.2.2 Change Log: Changes to how mycomputer handles NTFS permissions File Changes: ~/Bin/HAP.Web.dll ~/Bin/HAP.Web.pdbIdeaNMR: IdeaNMR Web App PreAlpha 0.1: This is the first release.IP Informer: Beta Release: V0.8.0.0 Beta.LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.9: Main updates for this release Fixed Status update. (updates where not correctly passed on to LinkedIn) Added landscape/GSensor support. (Currentl...LINQ to Twitter: LINQ to Twitter Beta v2.0.11: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...LinqSpecs: Version 1.0 alpha: This is the alpha version of LinqSpecs.miniTodo: mini Todo version 0.2: ・デザインを透明主体に変更 　-件数を表示している部分のドラッグでウィンドウ移動 　-上記の部分右クリックで、「最前面に表示」、「全アイテム管理」 ・グラフを日/週/月単位の３種類に増やした ・新規作成、完了時にアニメーション追加。完了時にはサウンドも追加 ・テキスト未入力時は追加ボタンも非表示My Notepad: My Notepad (Beta): This is the Beta version of My Notepad. The software is stable enough for you to use. Enjoy the flexibility of docking and also the all new Syntax ...NHTrace: NHTrace-45713: NHTrace-45713Nito.KitchenSink: Version 8: New features (since Version 5) Fixed null reference bug in ExceptionExtensions. Added DynamicStaticTypeMembers and RefOutArg for dynamically (lat...Nito.LINQ: Beta (v0.5): Rx version The "with Rx" versions of Nito.LINQ are built against Rx 1.0.2521.102, released 2010-05-14. Breaking changes Corrected internal read-on...Object/Relational Mapper & Code Generator in Net 2.0 for Relational & XML Schema: 2.9: Work on UI templates for associative tables (2-column PK), using users/roles pages as an example. Added templates for Not-In-Group sql and cache-ba...patterns & practices - GAX Extensions Library: GEL for gax2010: This is the GEL for GAX 2010, support Visual Stuido 2010patterns & practices - Smart Client Guidance: Smart Client Software Factory 2010 Documentation: If the right-side pane of the chm file is not displayed correctly, do the following: 1) Download SCSF2010Guide.chm file. 2) Start the windows explo...patterns & practices - Windows Azure Guidance: WAAG - Part 1 - Release Candidate: "Release Candidate" for Part 1 of the Windows Azure Guide Highlights of this release are: Code samples complete. Fixed few bugs on "Dependency Ch...Rawr: Rawr 2.3.17: >Rawr3 Public Beta has been released! Click here for details.< - Lots of improvements to the default data files. There is a known issue with the s...RunAs Launcher: RunAs Launcher 1.2: This is the first version being released to CodePlex. Simply extract the file and run the executable. For those that wish to download the source c...Rx Contrib: V1.5: Bug fixsecs4net: Release 1.0: Notes: Runtime requirement: .Net framework 2.0 SP2 with System.Core(.NET 3.5), System.Threading(Rx for 3.5 SP1)SharePoint Admin Dashboard: SPDashboard v1.0: SPDashboard v1.0ShortURL Creator: ShortURL Creator 1.3.0.0: Added new provider u.nu and minimum UI changesStyleCop+: StyleCop+ 0.7: StyleCop+ is now fully compatible with StyleCop 4.4. The following entities were supported in Advanced Naming Rules: - Delegate - Event - Property...Value Injecter: an aspect oriented mapper: Value Injecter 1.2: ValueInjecter library, Sample solution that contains: web-forms sample project win-forms sample project unit tests samplesVCC: Latest build, v2.1.30517.0: Automatic drop of latest buildVCC: Latest build, v2.1.30517.1: Automatic drop of latest buildVidCoder: 0.4.1: Changes: Marks system as "working" to prevent computer from sleeping during an encode. CPU priority changed to BelowNormal during encodes. Enco...WSP Listener: WSP Listener version 2.0.0.0: This new version includes: All assemblies and required assets in one WSP Seperated code in library assembly Activate the WSP Listener with one...Yet Another Database Viewer: Beta: first release of the programYet another developer blog - Examples: Asynchronous TreeView in ASP.NET WebForms: This sample application shows how to use jQuery TreeView plugin for creating an asynchronous TreeView in ASP.NET WebForms. This application is acco...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelRawrBlogEngine.NETMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersGMap.NET - Great Maps for Windows Forms & PresentationCassiniDev - Cassini 3.5/4.0 Developers EditionDotNetZip Library

  Read the article

• ASP.NET MVC CRUD Validation

  - by Ricardo Peres

  One thing I didn’t refer on my previous post on ASP.NET MVC CRUD with AJAX was how to retrieve model validation information into the client. We want to send any model validation errors to the client in the JSON object that contains the ProductId, RowVersion and Success properties, specifically, if there are any errors, we will add an extra Errors collection property. Here’s how: 1: [HttpPost] 2: [AjaxOnly] 3: [Authorize] 4: public JsonResult Edit(Product product) 5: { 6: if (this.ModelState.IsValid == true) 7: { 8: using (ProductContext ctx = new ProductContext()) 9: { 10: Boolean success = false; 11:  12: ctx.Entry(product).State = (product.ProductId == 0) ? EntityState.Added : EntityState.Modified; 13:  14: try 15: { 16: success = (ctx.SaveChanges() == 1); 17: } 18: catch (DbUpdateConcurrencyException) 19: { 20: ctx.Entry(product).Reload(); 21: } 22:  23: return (this.Json(new { Success = success, ProductId = product.ProductId, RowVersion = Convert.ToBase64String(product.RowVersion) })); 24: } 25: } 26: else 27: { 28: Dictionary<String, String> errors = new Dictionary<String, String>(); 29:  30: foreach (KeyValuePair<String, ModelState> keyValue in this.ModelState) 31: { 32: String key = keyValue.Key; 33: ModelState modelState = keyValue.Value; 34:  35: foreach (ModelError error in modelState.Errors) 36: { 37: errors[key] = error.ErrorMessage; 38: } 39: } 40:  41: return (this.Json(new { Success = false, ProductId = 0, RowVersion = String.Empty, Errors = errors })); 42: } 43: } As for the view, we need to change slightly the onSuccess JavaScript handler on the Single view: 1: function onSuccess(ctx) 2: { 3: if (typeof (ctx.Success) != 'undefined') 4: { 5: $('input#ProductId').val(ctx.ProductId); 6: $('input#RowVersion').val(ctx.RowVersion); 7:  8: if (ctx.Success == false) 9: { 10: var errors = ''; 11:  12: if (typeof (ctx.Errors) != 'undefined') 13: { 14: for (var key in ctx.Errors) 15: { 16: errors += key + ': ' + ctx.Errors[key] + '\n'; 17: } 18:  19: window.alert('An error occurred while updating the entity: the model contained the following errors.\n\n' + errors); 20: } 21: else 22: { 23: window.alert('An error occurred while updating the entity: it may have been modified by third parties. Please try again.'); 24: } 25: } 26: else 27: { 28: window.alert('Saved successfully'); 29: } 30: } 31: else 32: { 33: if (window.confirm('Not logged in. Login now?') == true) 34: { 35: document.location.href = '<% 1: : FormsAuthentication.LoginUrl %>?ReturnURL=' + document.location.pathname; 36: } 37: } 38: } The logic is as this: If the Edit action method is called for a new entity (the ProductId is 0) and it is valid, the entity is saved, and the JSON results contains a Success flag set to true, a ProductId property with the database-generated primary key and a RowVersion with the server-generated ROWVERSION; If the model is not valid, the JSON result will contain the Success flag set to false and the Errors collection populated with all the model validation errors; If the entity already exists in the database (ProductId not 0) and the model is valid, but the stored ROWVERSION is different that the one on the view, the result will set the Success property to false and will return the current (as loaded from the database) value of the ROWVERSION on the RowVersion property. On a future post I will talk about the possibilities that exist for performing model validation, stay tuned!

  Read the article

• A Communication System for XAML Applications

  - by psheriff

  In any application, you want to keep the coupling between any two or more objects as loose as possible. Coupling happens when one class contains a property that is used in another class, or uses another class in one of its methods. If you have this situation, then this is called strong or tight coupling. One popular design pattern to help with keeping objects loosely coupled is called the Mediator design pattern. The basics of this pattern are very simple; avoid one object directly talking to another object, and instead use another class to mediate between the two. As with most of my blog posts, the purpose is to introduce you to a simple approach to using a message broker, not all of the fine details. IPDSAMessageBroker Interface As with most implementations of a design pattern, you typically start with an interface or an abstract base class. In this particular instance, an Interface will work just fine. The interface for our Message Broker class just contains a single method “SendMessage” and one event “MessageReceived”. public delegate void MessageReceivedEventHandler( object sender, PDSAMessageBrokerEventArgs e); public interface IPDSAMessageBroker{  void SendMessage(PDSAMessageBrokerMessage msg);   event MessageReceivedEventHandler MessageReceived;} PDSAMessageBrokerMessage Class As you can see in the interface, the SendMessage method requires a type of PDSAMessageBrokerMessage to be passed to it. This class simply has a MessageName which is a ‘string’ type and a MessageBody property which is of the type ‘object’ so you can pass whatever you want in the body. You might pass a string in the body, or a complete Customer object. The MessageName property will help the receiver of the message know what is in the MessageBody property. public class PDSAMessageBrokerMessage{  public PDSAMessageBrokerMessage()  {  }   public PDSAMessageBrokerMessage(string name, object body)  {    MessageName = name;    MessageBody = body;  }   public string MessageName { get; set; }   public object MessageBody { get; set; }} PDSAMessageBrokerEventArgs Class As our message broker class will be raising an event that others can respond to, it is a good idea to create your own event argument class. This class will inherit from the System.EventArgs class and add a couple of additional properties. The properties are the MessageName and Message. The MessageName property is simply a string value. The Message property is a type of a PDSAMessageBrokerMessage class. public class PDSAMessageBrokerEventArgs : EventArgs{  public PDSAMessageBrokerEventArgs()  {  }   public PDSAMessageBrokerEventArgs(string name,     PDSAMessageBrokerMessage msg)  {    MessageName = name;    Message = msg;  }   public string MessageName { get; set; }   public PDSAMessageBrokerMessage Message { get; set; }} PDSAMessageBroker Class Now that you have an interface class and a class to pass a message through an event, it is time to create your actual PDSAMessageBroker class. This class implements the SendMessage method and will also create the event handler for the delegate created in your Interface. public class PDSAMessageBroker : IPDSAMessageBroker{  public void SendMessage(PDSAMessageBrokerMessage msg)  {    PDSAMessageBrokerEventArgs args;     args = new PDSAMessageBrokerEventArgs(      msg.MessageName, msg);     RaiseMessageReceived(args);  }   public event MessageReceivedEventHandler MessageReceived;   protected void RaiseMessageReceived(    PDSAMessageBrokerEventArgs e)  {    if (null != MessageReceived)      MessageReceived(this, e);  }} The SendMessage method will take a PDSAMessageBrokerMessage object as an argument. It then creates an instance of a PDSAMessageBrokerEventArgs class, passing to the constructor two items: the MessageName from the PDSAMessageBrokerMessage object and also the object itself. It may seem a little redundant to pass in the message name when that same message name is part of the message, but it does make consuming the event and checking for the message name a little cleaner – as you will see in the next section. Create a Global Message Broker In your WPF application, create an instance of this message broker class in the App class located in the App.xaml file. Create a public property in the App class and create a new instance of that class in the OnStartUp event procedure as shown in the following code: public partial class App : Application{  public PDSAMessageBroker MessageBroker { get; set; }   protected override void OnStartup(StartupEventArgs e)  {    base.OnStartup(e);     MessageBroker = new PDSAMessageBroker();  }} Sending and Receiving Messages Let’s assume you have a user control that you load into a control on your main window and you want to send a message from that user control to the main window. You might have the main window display a message box, or put a string into a status bar as shown in Figure 1. Figure 1: The main window can receive and send messages The first thing you do in the main window is to hook up an event procedure to the MessageReceived event of the global message broker. This is done in the constructor of the main window: public MainWindow(){  InitializeComponent();   (Application.Current as App).MessageBroker.     MessageReceived += new MessageReceivedEventHandler(       MessageBroker_MessageReceived);} One piece of code you might not be familiar with is accessing a property defined in the App class of your XAML application. Within the App.Xaml file is a class named App that inherits from the Application object. You access the global instance of this App class by using Application.Current. You cast Application.Current to ‘App’ prior to accessing any of the public properties or methods you defined in the App class. Thus, the code (Application.Current as App).MessageBroker, allows you to get at the MessageBroker property defined in the App class. In the MessageReceived event procedure in the main window (shown below) you can now check to see if the MessageName property of the PDSAMessageBrokerEventArgs is equal to “StatusBar” and if it is, then display the message body into the status bar text block control. void MessageBroker_MessageReceived(object sender,   PDSAMessageBrokerEventArgs e){  switch (e.MessageName)  {    case "StatusBar":      tbStatus.Text = e.Message.MessageBody.ToString();      break;  }} In the Page 1 user control’s Loaded event procedure you will send the message “StatusBar” through the global message broker to any listener using the following code: private void UserControl_Loaded(object sender,  RoutedEventArgs e){  // Send Status Message  (Application.Current as App).MessageBroker.    SendMessage(new PDSAMessageBrokerMessage("StatusBar",      "This is Page 1"));} Since the main window is listening for the message ‘StatusBar’, it will display the value “This is Page 1” in the status bar at the bottom of the main window. Sending a Message to a User Control The previous example sent a message from the user control to the main window. You can also send messages from the main window to any listener as well. Remember that the global message broker is really just a broadcaster to anyone who has hooked into the MessageReceived event. In the constructor of the user control named ucPage1 you can hook into the global message broker’s MessageReceived event. You can then listen for any messages that are sent to this control by using a similar switch-case structure like that in the main window. public ucPage1(){  InitializeComponent();   // Hook to the Global Message Broker  (Application.Current as App).MessageBroker.    MessageReceived += new MessageReceivedEventHandler(      MessageBroker_MessageReceived);} void MessageBroker_MessageReceived(object sender,  PDSAMessageBrokerEventArgs e){  // Look for messages intended for Page 1  switch (e.MessageName)  {    case "ForPage1":      MessageBox.Show(e.Message.MessageBody.ToString());      break;  }} Once the ucPage1 user control has been loaded into the main window you can then send a message using the following code: private void btnSendToPage1_Click(object sender,  RoutedEventArgs e){  PDSAMessageBrokerMessage arg =     new PDSAMessageBrokerMessage();   arg.MessageName = "ForPage1";  arg.MessageBody = "Message For Page 1";   // Send a message to Page 1  (Application.Current as App).MessageBroker.SendMessage(arg);} Since the MessageName matches what is in the ucPage1 MessageReceived event procedure, ucPage1 can do anything in response to that event. It is important to note that when the message gets sent it is sent to all MessageReceived event procedures, not just the one that is looking for a message called “ForPage1”. If the user control ucPage1 is not loaded and this message is broadcast, but no other code is listening for it, then it is simply ignored. Remove Event Handler In each class where you add an event handler to the MessageReceived event you need to make sure to remove those event handlers when you are done. Failure to do so can cause a strong reference to the class and thus not allow that object to be garbage collected. In each of your user control’s make sure in the Unloaded event to remove the event handler. private void UserControl_Unloaded(object sender, RoutedEventArgs e){  if (_MessageBroker != null)    _MessageBroker.MessageReceived -=         _MessageBroker_MessageReceived;} Problems with Message Brokering As with most “global” classes or classes that hook up events to other classes, garbage collection is something you need to consider. Just the simple act of hooking up an event procedure to a global event handler creates a reference between your user control and the message broker in the App class. This means that even when your user control is removed from your UI, the class will still be in memory because of the reference to the message broker. This can cause messages to still being handled even though the UI is not being displayed. It is up to you to make sure you remove those event handlers as discussed in the previous section. If you don’t, then the garbage collector cannot release those objects. Instead of using events to send messages from one object to another you might consider registering your objects with a central message broker. This message broker now becomes a collection class into which you pass an object and what messages that object wishes to receive. You do end up with the same problem however. You have to un-register your objects; otherwise they still stay in memory. To alleviate this problem you can look into using the WeakReference class as a method to store your objects so they can be garbage collected if need be. Discussing Weak References is beyond the scope of this post, but you can look this up on the web. Summary In this blog post you learned how to create a simple message broker system that will allow you to send messages from one object to another without having to reference objects directly. This does reduce the coupling between objects in your application. You do need to remember to get rid of any event handlers prior to your objects going out of scope or you run the risk of having memory leaks and events being called even though you can no longer access the object that is responding to that event. NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “A Communication System for XAML Applications” from the drop down list.

  Read the article

• Calling XAI Inbound Services from Oracle BI Publisher

  - by ACShorten

  Note: This technique requires Oracle BI Publisher 1.1.3.4.1 which supports Service Complex Types. Web Services require credentials for authentication. Note: The deafults for the product installation are used in this article. If your site uses alternative values then substitute those alternatives where applicable. Note: Examples shown in this article are examples for illustrative purposes only. When building a report in Oracle BI Publisher it may be necessary to call an XAI Inbound Service to get information via the object rather than directly calling the database tables for various reasons: The CLOB fields used in the Object are accessible for a report. Note: CLOB fields cannot be used as criteria in the current release. Objects can take advantage of algorithms to format or calculate additional data that is not stored in the database directly. For example, Information format strings can automatically generated by the object which gives consistent information between a report and the online screens. To use this facility the following process must be performed: Ensure that the product group, cisusers by default, is enabled for the SPLServiceBean in the console. This allows BI Publisher access to call Web Services directly. To ensure this follow the instructions below: Logon to the Oracle WebLogic server console using an appropriate administrator account. By default the user system or weblogic is provided for this purpose. Navigate to the Security Realms section and select your configured realm. This is set to myrealm by default. In the Roles and Policies section, expand the SPLService section of the Deployments option to reveal the SPLServiceBean roles. If there is no role associated with the SPLServiceBean, create a new EJB role and specify the cisusers role, by default. For example:   Add a Role Condition to the role just created, with a Predicate List of Group and specify cisusers as the Group Argument Name. For example: Save all your changes. The XAI Inbound Services to be used by BI Publisher must be defined prior to using the interface. Refer to the XAI Best Practices (Doc Id: 942074.1) from My Oracle Support or via the online help for more information about this process. Inside BI Publisher create your report, according to the BI Publisher documentation. When specifying the dataset, under the Data Model Report option, specify the following to use an XAI Inbound Service as a data source: Parameter Comment Type Web Service Complex Type true Username Any valid user name within the product. This user MUST have security access to the objects referenced in the XAI Inbound Service Password Authentication password for Username Timeout Timeout, in seconds, set for the Web Service call. For example 60 seconds. WSDL URL Use the WSDL URL on the XAI Inbound Service definition as your WSDL URL. It will be in the following format by default:http://<host>:<port>/<server>/XAIApp/xaiserver/<service>?WSDLwhere: <host> - Host Name of Web Application Server <port> - Port allocated to Web Application Server for product access <server> - Server context for server <service> - XAI Inbound Service Name Note: For customers using secure transmission should substitute https instead of http and use the HTTPS port allocated to the product at installation time. Web Service Select the name of the service that shows in the drop-down menu. If no service name shows up, it means that Publisher could not establish a connection with the server or WSDL name provided in the above URL in order to get the service name. See BI Publisher server log for more information. Method Select the name of the Method that shows in the drop-down menu. A method name should show in the Method drop-down menu once the Web Service name is selected. For example: Additionally, filters can be used from the Web Service that can be generated, required or optional, from the WSDL in the Parameter List. For example:

  Read the article

• OSB and Coherence Integration

  - by mark.ms.smith

  Anyone who has tried to manage Coherence nodes or tried to cache results in OSB, will appreciate the new functionality now available. As of WebLogic Server 10.3.4, you can use the WebLogic Administration Server, via the Administration Console or WLST, and java-based Node Manager to manage and monitor the life cycle of stand-alone Coherence cache servers. This is a great step forward as the previous options mainly involved writing your own scripts to do this. You can find an excellent description of how this works at James Bayer’s blog. You can also find the WebLogic documentation here.As of Oracle Service Bus 11gR1 (11.1.1.3.0), OSB now supports service result caching for Business Bervices with Coherence. If you use Business Services that return somewhat static results that do not change often, you can configure those Business Services to cache results. For Business Services that use result caching, you can control the time to live for the cached result. After the cached result expires, the next Business Service call results in invoking the back-end service to get the result. This result is then stored in the cache for future requests to access. I’m thinking that this caching functionality would be perfect for some sort of cross reference data that was refreshed nightly by batch. You can find the OSB Business Service documentation here.Result Caching in a dedicated JVMThis example demonstrates these new features by configuring a OSB Business Service to cache results in a separate Coherence JVM managed by WebLogic. The reason why you may want to use a separate, dedicated JVM is that the result cache data could potentially be quite large and you may want to protect your OSB java heap.In this example, the client will call an OSB Proxy Service to get Employee data based on an Employee Id. Using a Business Service, OSB calls an external system. The results are automatically cached and when called again, the respective results are retrieved from the cache rather than the external system.Step 1 – Set up your Coherence Server Via the OSB Administration Server Console, create your Coherence Server to be used as the results cache.Here are the configured Coherence Server arguments from the Server Start tab. Note that I’m using the default Cache Config and Override files in the domain.-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m -Dtangosol.coherence.override=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-override.xml -Dtangosol.coherence.cluster=OSB-cluster -Dtangosol.coherence.cacheconfig=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-cache-config.xml -Dtangosol.coherence.distributed.localstorage=true -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dcom.sun.management.jmxremote Just incase you need it, here is my Coherence Server classpath:/app/middleware/jdev_11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar: /app/middleware/jdev_11.1.1.4/modules/features/weblogic.server.modules.coherence.server_10.3.4.0.jar: /app/middleware/jdev_11.1.1.4/oracle_osb/lib/osb-coherence-client.jarBy default, OSB will try and create a local result cache instance. You need to disable this by adding the following JVM parameters to each of the OSB Managed Servers:-Dtangosol.coherence.distributed.localstorage=false -DOSB.coherence.cluster=OSB-clusterIf you need more information on configuring a remote result cache, have a look at the configuration documentration under the heading Using an Out-of-Process Coherence Cache Server.Step 2 – Configure your Business Service Under the respective Business Service Message Handling Configuration (Advanced Properties), you need to enable “Result Caching”. Additionally, you need to determine what the cache data will be keyed on. In the example below, I’m keying it on the unique Employee Id.The Results As this test was on my laptop, the actual timings are just an indication that there is a benefit to caching results. Using my test harness, I sent 10,000 requests to OSB, all with the same Employee Id. In this case, I had result caching disabled.You can see that this caused the back end Business Service (BS_GetEmployeeData) to be called for each request. Then after enabling result caching, I sent the same number of identical requests.You can now see the Business Service was only invoked once on the first request. All subsequent requests used the Results Cache.

  Read the article

• Dynamically creating meta tags in asp.net mvc

  - by Jalpesh P. Vadgama

  As we all know that Meta tag has very important roles in Search engine optimization and if we want to have out site listed with good ranking on search engines then we have to put meta tags. Before some time I have blogged about dynamically creating meta tags in asp.net 2.0/3.5 sites, in this blog post I am going to explain how we can create a meta tag dynamically very easily. To have meta tag dynamically we have to create a meta tag on server-side. So I have created a method like following. public string HomeMetaTags() { System.Text.StringBuilder strMetaTag = new System.Text.StringBuilder(); strMetaTag.AppendFormat(@"<meta content='{0}' name='Keywords'/>","Home Action Keyword"); strMetaTag.AppendFormat(@"<meta content='{0}' name='Descption'/>", "Home Description Keyword"); return strMetaTag.ToString(); } Here you can see that I have written a method which will return a string with meta tags. Here you can write any logic you can fetch it from the database or you can even fetch it from xml based on key passed. For the demo purpose I have written that hardcoded. So it will create a meta tag string and will return it. Now I am going to store that meta tag in ViewBag just like we have a title tag. In this post I am going to use standard template so we have our title tag there in viewbag message. Same way I am going save meta tag like following in ViewBag. public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; ViewBag.MetaTag = HomeMetaTags(); return View(); } Here in the above code you can see that I have stored MetaTag ViewBag. Now as I am using standard ASP.NET MVC3 template so we have our we have out head element in Shared folder _layout.cshtml file. So to render meta tag I have modified the Head tag part of _layout.cshtml like following. <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-1.5.1.min.js")" type="text/javascript"></script> @Html.Raw(ViewBag.MetaTag) </head> Here in the above code you can see I have use @Html.Raw method to embed meta tag in _layout.cshtml page. This HTML.Raw method will embed output to head tag section without encoding html. As we have already taken care of html tag in string function we don’t need the html encoding. Now it’s time to run application in browser. Now once you run your application in browser and click on view source you will find meta tag for home page as following. That’s its It’s very easy to create dynamically meta tag. Hope you liked it.. Stay tuned for more.. Till then happy programming.

  Read the article

• SQL SERVER – Integrate Your Data with Skyvia – Cloud ETL Solution

  - by Pinal Dave

  In our days data integration often becomes a key aspect of business success. For business analysts it’s very important to get integrated data from various sources, such as relational databases, cloud CRMs, etc. to make correct and successful decisions. There are various data integration solutions on market, and today I will tell about one of them – Skyvia. Skyvia is a cloud data integration service, which allows integrating data in cloud CRMs and different relational databases. It is a completely online solution and does not require anything except for a browser. Skyvia provides powerful etl tools for data import, export, replication, and synchronization for SQL Server and other databases and cloud CRMs. You can use Skyvia data import tools to load data from various sources to SQL Server (and SQL Azure). Skyvia supports such cloud CRMs as Salesforce and Microsoft Dynamics CRM and such databases as MySQL and PostgreSQL. You even can migrate data from SQL Server to SQL Server, or from SQL Server to other databases and cloud CRMs. Additionally Skyvia supports import of CSV files, either uploaded manually or stored on cloud file storage services, such as Dropbox, Box, Google Drive, or FTP servers. When data import is not enough, Skyvia offers bidirectional data synchronization. With this tool, you can synchronize SQL Server data with other databases and cloud CRMs. After performing the first synchronization, Skyvia tracks data changes in the synchronized data storages. In SQL Server databases (and other relational databases) it creates additional tracking tables and triggers. This allows synchronizing only the changed data. Skyvia also maps records by their primary key values to each other, so it does not require different sources to have the same primary key structure. It still can match the corresponding records without having to add any additional columns or changing data structure. The only requirement for synchronization is that primary keys must be autogenerated. With Skyvia it’s not necessary for data to have the same structure in integrated data storages. Skyvia supports powerful mapping mechanisms that allow synchronizing data with completely different structure. It provides support for complex mathematical and string expressions when mapping data, using lookups, etc. You may use data splitting – loading data from a single CSV file or source table to multiple related target tables. Or you may load data from several source CSV files or tables to several related target tables. In each case Skyvia preserves data relations. It builds corresponding relations between the target data automatically. When you often work with cloud CRM data, native CRM data reporting and analysis tools may be not enough for you. And there is a vast set of professional data analysis and reporting tools available for SQL Server. With Skyvia you can quickly copy your cloud CRM data to an SQL Server database and apply corresponding SQL Server tools to the data. In such case you can use Skyvia data replication tools. It allows you to quickly copy cloud CRM data to SQL Server or other databases without customizing any mapping. You need just to specify columns to copy data from. Target database tables will be created automatically. Skyvia offers powerful filtering settings to replicate only the records you need. Skyvia also provides capability to export data from SQL Server (including SQL Azure) and other databases and cloud CRMs to CSV files. These files can be either downloadable manually or loaded to cloud file storages or FTP server. You can use export, for example, to backup SQL Azure data to Dropbox. Any data integration operation can be scheduled for automatic execution. Thus, you can automate your SQL Azure data backup or data synchronization – just configure it once, then schedule it, and benefit from automatic data integration with Skyvia. Currently registration and using Skyvia is completely free, so you can try it yourself and find out whether its data migration and integration tools suits for you. Visit this link to register on Skyvia: https://app.skyvia.com/register Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Cloud Computing

  Read the article

• Grub 'Read Error' - Only Loads with LiveCD

  - by Ryan Sharp

  Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

  Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >