Search Results

Search found 20785 results on 832 pages for 'idea'.

Page 336/832 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

  • What is the correct dependency rpm for libcurl.so.3

    - by SephMerah
    So I have a failed dependency and I am having trouble downloading the correct rpm. The error is libcurl.so.3()(64bit) is needed. I have Centos 6 and I have looking in this site for the correct rpm. The problem though is, and this is another place where linux fails in being intuitive, is that the rpm name is different than the dependency name. So it might be a curl3 rpm or a libcurl3 rpm or I have no idea. Anyone know which one it is?

    Read the article

  • Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

    - by Nakedible
    I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

    Read the article

  • Why my new GTX 660m's clock drops drastically after running few seconds

    - by trVoldemort
    I bought a Lenovo Y580 laptop few days ago, this model is equipped with GTX 660m graphics card. However, the game performance is unbelievably poor since it out from the box. I realized there is something wrong with this graphics card. I downloaded GPU-z, and did a simple test. And I was shocked by the fact that my GTX 660m graphics card is running at 135.0mhz core clock. (It should be 835mhz at least!) Even the integrated graphics card "Intel HD graphics 4000" can run at 650mhz. Further examining showed that in the first few seconds GTX 660m was actually running at 835mhz, however the core temperature quickly reached 90+°C and the clock (maybe) automatically drop to 135.0mhz. This is very strange. Anyone has any idea what's going on here?

    Read the article

  • How to troubleshoot a remote wmi query/access failure?

    - by Roman
    I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

    Read the article

  • Portal And Content – Introduction (1 of 7)

    - by Stefan Krantz
    The coming post over the next two months will be included in a new series. The idea is to help the reader to understand how to enable a versatile and manageable portal. Each post will go through a specific use case or lifecycle group of events that a Content Driven Portal requires the development team to consider. The current planning is to deliver following subjects, each topic will be enclosed in a separate blog post. Introduction – Introduction to the series of posts and what to expect at the end of the series Components, part 1 – UCM, Site Studio and high level introduction to content templates Components, part 2 – Page Templates and  Navigation model Components, part 3 – Applied Customization Framework for Content Presenter Taskflows Scenario 1 – Enable a Portal for runtime administration Scenario 2 – Enable a Portal for Internationalization Scenario 3 – Enable a Portal for Content Workflows Background This post series has been issued to help customers, partners and consultants to understand the concept of a WebCenter Portal project where the main focus or a majority of the portal has content interaction. Today the most portal installations Oracle WebCenter Portal is involved in have a vast majority of content based pages. Many of the Portal projects have or will run into challenges, to mitigate these challenges the portal and content lifecycle has to be well designed. The coming posts will address the main components that should be involved when creating such scenarios; it will also go into details on the process by describing three solution scenarios. The aim with the scenarios is to give the reader a more hands on understanding of the concept of building and architecting a Content Driven Portal. The selected scenarios are selected based on the most common use cases that we have identified until today.

    Read the article

  • Sudden drop in Total Indexed pages and increase in 'Not Selected' number.

    - by Pravin
    My blog is around 1 year old and have PR2. The average daily pageviews upto last 1 week were 1800. The total number of posts are 180. Though I have only 180 total posts, the total number of Indexed URL was increasing and it was as high as 510. But in the month of Sept2012, the total number of Indexed pages dropped from 510 to 214. The drop was sudden and it is now increasing very slowly. Also, the other main concern is huge increase in 'Not Selected' number. It is currently 814. I have never posted any post again and never copied any idea from any other blog. But I do use internal linking to some older post those are related to the new posts. The questions are:; Why there is sudden drop in the 'Total Indexed' pages. Why there was increase in total indexed pages to 500 even though the total posts were only 180. As the drop in 'Total Indexed' was in the month of sept2012, I was getting same organic traffic and it was steadily increasing till last week and then there was a 50 drop in the total pageviews. Why. Now, again the traffic is becoming to normal but still there is a problem. Is increase in the 'Not selected' number is a cause of drop in 'Total Indexed'? How to prevent or reduce the number of 'Not Selected' even though I do not have any duplicate post withing blog. Is the 'internal linking' to older post creating 'Not selected' problem? Should I edit my 'Robot.txt' to avoid crawling of labes that may be creating duplicate posts or something like that, if so, what is correct robot.txt. I have uploaded the screenshot of the graph of Webmaster Tools. Please take a look and give suggestions. Please help. Thank you in advance.

    Read the article

  • KISS principle applied to programming language design?

    - by Giorgio
    KISS ("keep it simple stupid", see e.g. here) is an important principle in software development, even though it apparently originated in engineering. Citing from the wikipedia article: The principle is best exemplified by the story of Johnson handing a team of design engineers a handful of tools, with the challenge that the jet aircraft they were designing must be repairable by an average mechanic in the field under combat conditions with only these tools. Hence, the 'stupid' refers to the relationship between the way things break and the sophistication available to fix them. If I wanted to apply this to the field of software development I would replace "jet aircraft" with "piece of software", "average mechanic" with "average developer" and "under combat conditions" with "under the expected software development / maintenance conditions" (deadlines, time constraints, meetings / interruptions, available tools, and so on). So it is a commonly accepted idea that one should try to keep a piece of software simple stupid so that it easy to work on it later. But can the KISS principle be applied also to programming language design? Do you know of any programming languages that have been designed specifically with this principle in mind, i.e. to "allow an average programmer under average working conditions to write and maintain as much code as possible with the least cognitive effort"? If you cite any specific language it would be great if you could add a link to some document in which this intent is clearly expressed by the language designers. In any case, I would be interested to learn about the designers' (documented) intentions rather than your personal opinion about a particular programming language.

    Read the article

  • ClearTrace Supports Statement Level Events

    - by Bill Graziano
    One of the requests I get on a regular basis is to capture the performance of statement level events.  The latest beta has this feature available.  If you’re interested in this I’d like to get some feedback. I handle the SP:StmtCompleted and the SQL:StmtCompleted events.  These report CPU, reads, writes and duration. I’m not in any way saying it’s a good idea to trace these events.  Use with caution as this can make your traces much larger. If there are statement level events in the trace file they will be processed.  However the query screen displays batch level *OR* statement level events.  If it did both we’d be double counting. I don’t have very many traces with statement completed events in them.  That means I only did limited testing of how it parses these events.  It seems to work well so far though.  Your feedback is appreciated. If you ever write loops or cursors in stored procedures you’re going to get huge trace files.  Be warned. I also fixed an annoying bug where ClearTrace would fail and tell you a value had already been added.  This is a result of the collection I use being case-sensitive and SQL Server not being case-sensitive.  I thought I had properly coded around that but finally realized I hadn’t.  It should be fixed now. If you have any questions or problems the ClearTrace support forum is the best place for those.

    Read the article

  • Oracle RAC interconnect in a Dell M1000e Blade Enclosure

    - by Antitribu
    We are looking at a Dell M1000e enclosure and appropriate Blades with 4 NICs each. We are planning on running Linux/Oracle 11g RAC on two blades, storage will be handled on an iSCSI SAN for which two NICs (via passthrough) will be connected leaving us with two NICs (via blade centre switches). We would like to have an interconnect (obviously) , an external IP and an internal IP. Would best practice be to: bond the remaining two interfaces and VLAN as appropriate to provide three virtual interfaces? run the interconnect on one interface and VLAN the external/internal interfaces? purchase a blade with more NICs as the above is a terrible idea? Another option? Please feel free to point out the blindingly obvious or to relevant documentation on support.oracle. I am specifically interested in supported configurations and best practices. Thanks!

    Read the article

  • XNA 4.0, Combining model draw calls

    - by MayContainNuts
    I have the following problem: The levels in my game are made up of a Large Quantity of small Models and because of that I am experiencing frame rate problems. I already did some research and came to the conclusion that the amount of draw calls I am making must be the root of my problems. I've looked around for a while now and couldn't quite find a satisfying solution. I can't cull any of those models, in a worst case scenario there could be 1000 of them visible at the same time. I also looked at Hardware geometry Instancing, but I don't think that's quite what I'm looking for, because the level consists of a lot of different parts. So, what I'd like to do is combining 100 or 200 of these Models into a single large one and draw it as a whole 'chunk'. The whole geometry is static so it wouldn't have to be changed after combining, but different parts of it would have to use different textures (I think I can accomplish that with a texture atlas). But I have no idea how to to that, so does anybody have any suggestions?

    Read the article

  • Slight delay when switching modes in vim using tmux or screen

    - by Ton van den Heuvel
    Switching to and from insert mode in Vim is no longer instantaneous since I use tmux. After pressing Esc in insert mode, it takes a noticeable amount of time to actually get out of insert mode. After pressing Esc and any other key afterwards the switch is immediate, and the command for the key pressed after Esc is executed. Any idea what might cause this? The Vim configuration is not the problem as the delay does not occur when I run Vim outside tmux, so this is probably related to tmux somehow. I use gnome-terminal btw. Also worth noting, it seems I can not define key bindings in tmux for Esc, my plan was to bind Esc to: bind Escape send-keys ^[ Alas, it seems binding anything to Esc for tmux does not work. The same problem occurs in screen as well.

    Read the article

  • I can not watch any videos on youtube

    - by hamed
    I can not watch any videos on Youtube with any browser ( Chrome 20 , Firefox 13 , IE 8 ). I get this error An error accurred. Please try again later. My OS is Windows 7 (32bit) and the antivirus is zonealarm extreme security 10.1.079.000 . I installed flash player 11 but no success. I exited zone alarm to watch video, but no success again and error is the same. I don't know what's the problem . I searched a lot but didn't find the problem. I'd appreciate any idea.

    Read the article

  • QA - Developer communication

    - by exiter2000
    I am a developer and have worked at this company 4~5 years by now. We have been practicing scrum for about 2 years. I think, I have been worked well with QAs. I believe QAs/developers/technical writers are all one team. We are also actively hiring new team members. As a legacy member of the team, I have faced to assist new member(including developers and testers) with my business knowledge. We work on 2 weeks base scrum. I usually deliver my user story completely by the first date of second week and do some qa build with partial functionality of my user story so that QA has a good idea about my implementation and flow. Recently, I have met some QAs. In first week, the QAs do not talk... In stand up meeting, they say they are developing test cases regardless I deliver the user story or not. In second week, I do not have a single defect till Thursday afternoon and suddenly I have a major defect with several minor UI defect, which I delivered one week ago. Or I have one or two minor defects on second week however major defects on Thursday afternoon or Friday morning. This eventually make the story rolls over to the next sprint. Major defect takes time to fix and more importantly it would trigger the regression test for the story... Even if I worked Thursday evening and fixed it, the testing will not finish. And this happens multiple times with certain QAs. As a same team member, I talked to the QAs if they could test major defect with higher priority... Rejected... Because I do not understand QA process.. So I asked roughly how many major test cases are covered so far in the stand up meeting on 2nd week Wednesday.. The response is I should not ask this to the QA in the stand up meeting... What do I do?

    Read the article

  • How do I convince my boss that it's OK to use an application to access an outside website?

    - by Cyberherbalist
    That is, if you agree that it's OK. We have a need to maintain an accurate internal record of bank routing numbers, and my boss wants me to set up a process where once a week someone goes to the Federal Reserve's website, clicks on the link to get the list of routing numbers (or the link giving the updates since a particular date), and then manually uploads the resultant text file to an application that will make the update to our data. I told him that a manual process was not at all necessary, and that I could write a routine that would access the FED's routing numbers in the application that keeps our data updated, and put it on whatever schedule was appropriate. But he is greatly opposed to doing this, and calls it "hacking the Federal Reserve website." I think he's afraid that the FED is going to get after us. I showed him the FED's robot.txt file, and the only thing it forbids is an automated indexing of pages with extension .cf*: User-agent: * # applies to all robots Disallow: CF # disallow indexing of all CF* directories and pages This says nothing about accessing the same data automatically that you could access manually. Anyone have a good counterargument to the idea that we'd be "hacking" the FED?

    Read the article

  • nginx serves broken characters (nginx on linux as guest system in vbox)

    - by Andrew123321
    I have nginx 1.2.0-1 on debian 6.0.5. I have file test.css. I fill it with "abcd1234". Open it in browser. Then I change the content to "mnop". I receive "abcd" in response. I have all the files in folder shared between Windows (host) and Debian (guest) using Virtual Box. When I put the file elsewhere the problem does not occur! Any idea what can cause this? Thank you (I've been editing question as I was discovering the problem)

    Read the article

  • looking for a short explanation of fuzzy logic

    - by user613326
    Well i got the idea that basics of fuzzy logic are not that hard to grasp. And i got the feeling that someone might explain it to me in like 30 minutes. Just like i understand neural networks and am able to re-create the famous Xor problem. And go just beyond it and create 3 layer networks of x nodes. I'd like to understand fuzzy till a similar usefully level, in c# language. However the problem is face, I'd like to get concept right however i see many websites who include lots of errors in their basic explaining. Like for example showing pictures and use different numbers as shown in pictures to calculate, as if lots of people just copied stuff without noticing what they write down. While others for me go to deep in their math notation) To me that's very annoying to learn from. For me there is no need to re-invent wheel; Aforge already got a fuzzy logic framework. So what i am looking for are some good examples, good examples like how the neural XOR problem is solved. Is there anyone such a instructional resource out there; do you know a web page, or YouTube where it is shortly explained, what would you recommend me ? Note this article comes close; but it just doesnt nail it for me. After that i downloaded a bunch of free PDF's but most are academic and hard to read for me (i'm not English and dont have a special math degree). (i've been looking around a lot for this, good starter material about it is hard to find).

    Read the article

  • Copying windows 8 Users folder having long long paths

    - by bilal.haider
    I was trying to move my "Users" folder in Windows 8 as described here and here. But when I try to copy the folder using "xcopy" in Windows Installation Disk Repair Mode, after some files are copied, I get "insufficient memory". The files on which the error is given are like C:\Users\Bilal\Application Data\Application Data\Application Data.........Application Data\Application Data..... What is the point in such directories within directories? I also tried copying them using Mini Windows XP, but the problem was there too.. Also tried copying using Parted Magic Live CD... but still.. So now, how can I move them? Another Question. Is moving such/ system files using Linux a good idea? Does it do anything to permissions?

    Read the article

  • Clean Code Development & Flexible work environment - MSCC 26.10.2013

    Finally, some spare time to summarize my impressions and experiences of the recent meetup of Mauritius Software Craftsmanship Community. I already posted my comment on the event and on our social media networks: Professional - It's getting better with our meetups and I really appreciated that 'seniors' and 'juniors' were present today. Despite running a little bit out of time it was really great to see more students coming to the gathering. This time we changed location for our Saturday meetup and it worked out very well. A big thank you to Ebene Accelerator, namely Mrs Poonum, for the ability to use their meeting rooms for our community get-together. Already some weeks ago I had a very pleasant conversation with her about the MSCC aims, 'mission' and how we organise things. Additionally, I think that an environment like the Ebene Accelerator is a good choice as it acts as an incubator for young developers and start-ups. Reactions from other craftsmen Before I put my thoughts about our recent meeting down, I'd like to mention and cross-link to some of the other craftsmen that were present: "MSCC meet up is a massive knowledge gaining strategies for students, future entrepreneurs, or for geeks all around. Knowledge sharing becomes a fun. For those who have not been able to made it do subscribe on our MSCC meet up group at meetup.com." -- Nitin on Learning is fun with #MSCC #Ebene Accelerator "We then talked about the IT industry in Mauritius, salary issues in various field like system administration, software development etc. We analysed the reasons why people tend to hop from one company to another. That was a fun debate." -- Ish on MSCC meetup - Gang of Geeks "Flexible Learning Environment was quite interesting since these lines struck cords : "You're not a secretary....9 to 5 shouldn't suit you"....This allowed reflection...deep reflection....especially regarding the local mindset...which should be changed in a way which would promote creativity rather than choking it till death..." -- Yannick on 2nd MSCC Monthly Meet-up And others on Facebook... ;-) Visual impressions are available on our Meetup event page. More first time attendees We great pleasure I noticed that we have once again more first time visitors. A quick overlook showed that we had a majority of UoM students in first, second or last year. Some of them are already participating in the UoM Computer Club or are nominated as members of the Microsoft Student Partner (MSP) programme. Personally, I really appreciate the fact that the MSCC is able to gather such a broad audience. And as I wrote initially, the MSCC is technology-agnostic; we want IT people from any segment of this business. Of course, students which are about to delve into the 'real world' of working are highly welcome, and I hope that they might get one or other glimpse of experience or advice from employees. Sticking to the schedule? No, not really... And honestly, it was a good choice to go a little bit of the beaten tracks. I mean, yes we have a 'rough' agenda of topics that we would like to talk about or having a presentation about. But we keep it 'agile'. Due to the high number of new faces, we initiated another quick round of introductions and I gave a really brief overview of the MSCC. Next, we started to reflect on the Clean Code Developer (CCD) - Red Grade which we introduced on the last meetup. Nirvan was the lucky one and he did a good job on summarizing the various abbreviations of the first level of being a CCD. Actually, more interesting, we exchanged experience about the principles and practices of Red Grade, and it was very informative to get to know that Yann actually 'interviewed' a couple of friends, other students, local guys working in IT companies as well as some IT friends from India in order to counter-check on what he learned first-hand about Clean Code. Currently, he is reading the book of Robert C. Martin on that topic and I'm looking forward to his review soon. More output generates more input What seems to be like a personal mantra is working out pretty well for me since the beginning of this year. Being more active on social media networks, writing more article on my blog, starting the Mauritius Software Craftsmanship Community, and contributing more to other online communities has helped me to receive more project requests, job offers and possibilities to expand my business at IOS Indian Ocean Software Ltd. Actually, it is not a coincidence that one of the questions new craftsmen should answer during registration asks about having a personal blog. Whether you are just curious about IT, right in the middle of your Computer Studies, or already working in software development or system administration since a while you should consider to advertise and market yourself online. Easiest way to resolve this are to have online profiles on professional social media networks like LinkedIn, Xing, Twitter, and Google+ (no Facebook should be considered for private only), and considering to have a personal blog. Why? -- Be yourself, be proud of your work, and let other people know that you're passionate about your profession. Trust me, this is going to open up opportunities you might not have dreamt about... Exchanging ideas about having a professional online presence - MSCC meetup on the 26th October 2013 Furthermore, consider to put your Curriculum Vitae online, too. There are quite a number of service providers like 1ClickCV, Stack Overflow Careers 2.0, etc. which give you the ability to have an up to date CV online. At least put it on your site, next to your personal blog. Similar to what you would be able to see on my site here. Cyber Island Mauritius - are we there? A couple of weeks ago I got a 'cold' message on LinkedIn from someone living in the U.S. asking about the circumstances and conditions of the IT world of Mauritius. He has a great business idea, venture capital and is currently looking for a team of software developers (mainly mobile - iOS) for a new startup here in Mauritius. Since then we exchanged quite some details through private messages and Skype conversations, and I suggested that it might be a good chance to join our meetup through a conference call and see for yourself about potential candidates. During approximately 30 to 40 minutes the brief idea of the new startup was presented - very promising state-of-the-art technology aspects and integration of various public APIs -, and we had a good Q&A session about it. Also thanks to the excellent bandwidth provided by the Ebene Accelerator the video conference between three parties went absolutely well. Clean Code Developer - Orange Grade Hahaha - nice one... Being at the Orange Tower at Ebene and then talking about an Orange Grade as CCD. Well, once again I provided an overview of the principles and practices in that rank of Clean Code, and similar to our last meetup we discussed on the various aspect of each principle, whether someone already got in touch with it during studies or work, and how it could affect their future view on their source code. Following are the principles and practices of Clean Code Developer - Orange Grade: CCD Orange Grade - Principles Single Level of Abstraction (SLA) Single Responsibility Principle (SRP) Separation of Concerns (SoC) Source Code conventions CCD Orange Grade - Practices Issue Tracking Automated Integration Tests Reading, Reading, Reading Reviews Especially the part on reading technical books got some extra attention. We quickly gathered our views on that and came up with a result that ranges between Zero (0) and up to Fifteen (15) book titles per year. Personally, I'm keeping my progress between Six (6) and Eight (8) titles per year, but at least One (1) per quarter of a year. Which is also connected to the fact that I'm participating in the O'Reilly Reader Review Program and have a another benefit to get access to free books only by writing and publishing a review afterwards. We also had a good exchange on the extended topic of 'Reviews' - which to my opinion is abnormal difficult here in Mauritius for various reasons. As far as I can tell from my experience working with Mauritian software developers, either as colleagues, employees or during consulting services there are unfortunately two dominant pattern on that topic: Keeping quiet Running away Honestly, I have no evidence about why these are the two 'solutions' on reviews but that's the situation that I had to face over the last couple of years. Sitting together and talking about problematic issues, tackling down root causes of de-motivational activities and working on general improvements doesn't seem to have a ground within the IT world of Mauritius. Are you a typist or a creative software craftsman? - MSCC meetup on the 26th October 2013 One very good example that we talked about was the fact of 'job hoppers' as you can easily observe it on someone's CV - those people change job every single year; for no obvious reason! Frankly speaking, I wouldn't even consider an IT person like to for an interview. As a company you're investing money and effort into the abilities of your employees. Hiring someone that won't stay for a longer period is out of question. And sorry to say, these kind of IT guys smell fishy about their capabilities and more likely to cause problems than actually produce productive results. One of the reasons why there is a probation period on an employment contract is to give you the liberty to leave as early as possible in case that you don't like your new position. Don't fool yourself or waste other people's time and money by hanging around a full year only to snatch off the bonus payment... Future outlook: Developer's Conference Even though it is not official yet I already mentioned it several times during our weekly Code & Coffee sessions. The MSCC is looking forward to be able to organise or to contribute to an upcoming IT event. Currently, the rough schedule is set for April 2014 but this mainly depends on availability of location(s), a decent time frame for preparations, and the underlying procedures with public bodies to have it approved and so on. As soon as the information about date and location has been fixed there will be a 'Call for Papers' period in order to attract local IT enthusiasts to apply for a session slot and talk about their field of work and their passion in IT. More to come for sure... My resume of the day It was a great gathering and I am very pleased about the fact that we had another 15 craftsmen (plus 2 businessmen on conference call plus 2 young apprentices) in the same room, talking about IT related topics and sharing their experience as employees and students. Personally, I really appreciated the feedback from the students about their current view on their future career, and I really hope that some of them are going to pursue their dreams. Start promoting yourself and it will happen... Looking forward to your blogs! And last but not least our numbers on Meetup and Facebook have been increased as a direct consequence of this meetup. Please, spread the word about the MSCC and get your friends and colleagues to join our official site. The higher the number of craftsmen we have the better chances we have t achieve something great! Thanks!

    Read the article

  • Firmware/driver for Broadcom wifi card, PowerBook G4 running Ubuntu 12.04 [duplicate]

    - by user107831
    This question already has an answer here: How to Install Broadcom Wireless Drivers 40 answers This is my first time working with Ubuntu (or Linux), so please be patient. I am running Ubuntu 12.04-powerpc "Precise Pangolin" on a Mac PowerBook G4 with 1.67GHz processor. The firmware/driver for the wifi card is missing. For reasons not worth explaining, I cannot physically plug the computer into the network. I have another computer, a MacBook Pro running OSX, from which I can download files and port them by USB thumb drive. The wifi card in the PowerBook G4 is by Broadcom. The chip is BCM4306, rev. 3. The PCI number is 14e4:4302. I have downloaded b43-fwcutter_015-14_powerpc.deb and dropped it into the Home folder on the Ubuntu machine. However, it will not install. When I double-click, it opens with Ubuntu SoftwareCenter, but the "Install" button is inactive: I can't click it. There's a message beside the inactive button saying, "An older version of 'b43-fwcutter' is available in your normal software channels. Only install this file if you trust the origin." If I "right-click" the .deb file and open with Archive Manager, it shows me the "DEBIAN" and "usr" folders, but I'm unsure what to do from there...and fairly certain this is not the right way to do things. Maybe I have the wrong version of b43-fwcutter for my machine/version of Ubuntu? The documentation for this problem is a mess. It refers to all sorts of out-of-date Ubuntu versions and to an array of different "cutter" and firmware files. Maybe I'd be able to figure this out if I were a more seasoned Ubuntu user, but I have no idea why Sofware Center won't let me do the install. I would be VERY grateful for an explanation of how to get the wifi card working on this machine again. Thank you!

    Read the article

  • Graph data structures and journal format for mini-IDE

    - by matec
    Background: I am writing a small/partial IDE. Code is internally converted/parsed into a graph data structure (for fast navigation, syntax-check etc). Functionality to undo/redo (also between sessions) and restoring from crash is implemented by writing to and reading from journal. The journal records modifications to the graph (not to the source). Question: I am hoping for advice on a decision on data-structures and journal format. For the graph I see two possible versions: g-a Graph edges are implemented in the way that one node stores references to other nodes via memory address g-b Every node has an ID. There is an ID-to-memory-address map. Graph uses IDs (instead of addresses) to connect nodes. Moving along an edge from one node to another each time requires lookup in ID-to-address map. And also for the journal: j-a There is a current node (like current working directory in a shell + file-system setting). The journal contains entries like "create new node and connect to current", "connect first child of current node" (relative IDs) j-b Journal uses absolute IDs, e.g. "delete edge 7 - 5", "delete node 5" I could e.g. combine g-a with j-a or combine g-b with j-b. In principle also g-b and j-a should be possible. [My first/original attempt was g-a and a version of j-b that uses addresses, but that turned out to cause severe restrictions: nodes cannot change their addresses (or journal would have to keep track of it), and using journal between two sessions is a mess (or even impossible)] I wonder if variant a or variant b or a combination would be a good idea, what advantages and disadvantages they would have and especially if some variant might be causing troubles later.

    Read the article

  • MonoGame not all letters being drawn with DrawString

    - by Lex Webb
    I'm currently making a dynamic user interface for my game and are setting up having text on my buttons. I'm having an odd issue where, when i use a specific piece of code to determine the text position, it will not render all of the text passed to DrawString. Even weirder, is if i insert another DrawString after this, drawing more text at a different place, different parts of the text will be drawn. The code for drawing my button with the text attached is: public override void Draw(SpriteBatch sb, GameTime gt) { sb.Draw(currentImage, GetRelativeRectangle(), Color.White); sb.DrawString(font, text, new Vector2(this.GetRelativeDrawOffset().X + this.Width / 2 - font.MeasureString(text).X / 2, this.GetRelativeDrawOffset().Y + this.Height / 2 - font.MeasureString(text).Y / 2), textColor); } The methods in the creation of the Vector2 simply get the draw position of the button. I'm then doing some calculation to center the text. This produces this when the text is set to 'Test': And when i enter this piece of code below the first DrawString: sb.DrawString(font, "test", new Vector2(500, 50), Color.Pink); I should mention that that grey square is being drawn in the same spritebatch, before the button and the text. Any ideas as to what could be causing this? I have a feeling it may be due to draw order, but i have no idea how to control that.

    Read the article

  • Unable to start VMWare Workstation after upgrade to 13.04

    - by pst007x
    After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

    Read the article

  • Having trouble with EPSON Stylus SX130 scanner

    - by pinouchon
    I am trying to scan files with an EPSON Stylus SX130 on windows 7 x64. When i plug in the printer, windows automatically find drivers for printing, but not for scanning. So i go to the manufacturer website to download the drivers, select windows 7 64-bit and download drivers for EPSON Scan. The install works fine, but when i try to scan a file (eg: from paint or Windows fax and scan), the folowing message pops up and freezes the application : the progress bar plays the animation forever and the application does not respond. I then have no choice to kill the application with the task manager. Do you have an idea of what's going on ? How can i fix the problem, ie: how do i get the scanner actually scan files without freezing ? I tried to install the driver from the CD given in the printer package, and got the same problem. The only help i found so far (the error seems somewhat related) is this : Install a xp virtual machine and run it in there

    Read the article

  • Finding shapes in 2D Array, then optimising

    - by assemblism
    I'm new so I can't do an image, but below is a diagram for a game I am working on, moving bricks into patterns, and I currently have my code checking for rotated instances of a "T" shape of any colour. The X and O blocks would be the same colour, and my last batch of code would find the "T" shape where the X's are, but what I wanted was more like the second diagram, with two "T"s Current result      Desired Result [X][O][O]                [1][1][1] [X][X][_]                [2][1][_] [X][O][_]                [2][2][_] [O][_][_]                [2][_][_] My code loops through x/y, marks blocks as used, rotates the shape, repeats, changes colour, repeats. I have started trying to fix this checking with great trepidation. The current idea is to: loop through the grid and make note of all pattern occurrences (NOT marking blocks as used), and putting these to an array loop through the grid again, this time noting which blocks are occupied by which patterns, and therefore which are occupied by multiple patterns. looping through the grid again, this time noting which patterns obstruct which patterns That much feels right... What do I do now? I think I would have to try various combinations of conflicting shapes, starting with those that obstruct the most other patterns first.How do I approach this one? use the rational that says I have 3 conflicting shapes occupying 8 blocks, and the shapes are 4 blocks each, therefore I can only have a maximum of two shapes. (I also intend to incorporate other shapes, and there will probably be score weighting which will need to be considered when going through the conflicting shapes, but that can be another day) I don't think it's a bin packing problem, but I'm not sure what to look for. Hope that makes sense, thanks for your help

    Read the article

  • Get a file from a load balanced server in Windows Server

    - by Leandro
    I've a load balanced server on production environment for my application. The server is on Windows Server 2008 R2. I'm running a web application that creates and save a file into a folder on the web path. So I need to create a job that copy this file into another server. The main idea is that a file watcher checks for the file and then copy it instantly. But how can I know in what server it's the file? Please avoid "why you don't" answers to get a directly answer, if it's someone.

    Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >