integrated authentication - Page 336

How to design a high-level application protocol for metadata syncing between devices and server?

- by Jaanus

I am looking for guidance on how to best think about designing a high-level application protocol to sync metadata between end-user devices and a server. My goal: the user can interact with the application data on any device, or on the web. The purpose of this protocol is to communicate changes made on one endpoint to other endpoints through the server, and ensure all devices maintain a consistent picture of the application data. If user makes changes on one device or on the web, the protocol will push data to the central repository, from where other devices can pull it. Some other design thoughts: I call it "metadata syncing" because the payloads will be quite small, in the form of object IDs and small metadata about those ID-s. When client endpoints retrieve new metadata over this protocol, they will fetch actual object data from an external source based on this metadata. Fetching the "real" object data is out of scope, I'm only talking about metadata syncing here. Using HTTP for transport and JSON for payload container. The question is basically about how to best design the JSON payload schema. I want this to be easy to implement and maintain on the web and across desktop and mobile devices. The best approach feels to be simple timer- or event-based HTTP request/response without any persistent channels. Also, you should not have a PhD to read it, and I want my spec to fit on 2 pages, not 200. Authentication and security are out of scope for this question: assume that the requests are secure and authenticated. The goal is eventual consistency of data on devices, it is not entirely realtime. For example, user can make changes on one device while being offline. When going online again, user would perform "sync" operation to push local changes and retrieve remote changes. Having said that, the protocol should support both of these modes of operation: Starting from scratch on a device, should be able to pull the whole metadata picture "sync as you go". When looking at the data on two devices side by side and making changes, should be easy to push those changes as short individual messages which the other device can receive near-realtime (subject to when it decides to contact server for sync). As a concrete example, you can think of Dropbox (it is not what I'm working on, but it helps to understand the model): on a range of devices, the user can manage a files and folders—move them around, create new ones, remove old ones etc. And in my context the "metadata" would be the file and folder structure, but not the actual file contents. And metadata fields would be something like file/folder name and time of modification (all devices should see the same time of modification). Another example is IMAP. I have not read the protocol, but my goals (minus actual message bodies) are the same. Feels like there are two grand approaches how this is done: transactional messages. Each change in the system is expressed as delta and endpoints communicate with those deltas. Example: DVCS changesets. REST: communicating the object graph as a whole or in part, without worrying so much about the individual atomic changes. What I would like in the answers: Is there anything important I left out above? Constraints, goals? What is some good background reading on this? (I realize this is what many computer science courses talk about at great length and detail... I am hoping to short-circuit it by looking at some crash course or nuggets.) What are some good examples of such protocols that I could model after, or even use out of box? (I mention Dropbox and IMAP above... I should probably read the IMAP RFC.)

Read the article

Cannot decode complete cipher list in .NET SslStream handshake.

- by karmasponge

While attempting to move from a 'C' based SSL implementation to C# using the .NET SslStream and we have run into what look like cipher compatibility issues with the .NET SslStream and a AS400 machine we are trying to connect to (which worked previously). When we call SslStream.AuthenticateAsClient it is sending the following: 16 03 00 00 37 01 00 00 33 03 00 4d 2c 00 ee 99 4e 0c 5d 83 14 77 78 5c 0f d3 8f 8b d5 e6 b8 cd 61 0f 29 08 ab 75 03 f7 fa 7d 70 00 00 0c 00 05 00 0a 00 13 00 04 00 02 00 ff 01 00 Which decodes as (based on http://www.mozilla.org/projects/security/pki/nss/ssl/draft302.txt) [16] Record Type [03 00] SSL Version [00 37] Body length [01] SSL3_MT_CLIENT_HELLO [00 00 33] Length (51 bytes) [03 00] Version number = 768 [4d 2c 00 ee] 4 Bytes unix time [… ] 28 Bytes random number [00] Session number [00 0c] 12 bytes (2 * 6 Cyphers)? [00 05, 00 0a, 00 13, 00 04, 00 02, 00 ff] - [RC4, PBE-MD5-DES, RSA, MD5, PKCS, ???] [01 00] Null compression method The as400 server responds back with: 15 03 00 00 02 02 28 [15] SSL3_RT_ALERT [03 00] SSL Version [00 02] Body Length (2 Bytes) [02 28] 2 = SSL3_RT_FATAL, 40 = SSL3_AD_HANDSHAKE_FAILURE I'm specifically looking to decode the '00 FF' at the end of the cyphers. Have I decoded it correctly? What does, if anything, '00 FF' decode too? I am using the following code to test/reproduce: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Net.Sockets; using System.Net.Security; using System.Security.Authentication; using System.IO; using System.Diagnostics; using System.Security.Cryptography.X509Certificates; namespace TestSslStreamApp { class DebugStream : Stream { private Stream AggregatedStream { get; set; } public DebugStream(Stream stream) { AggregatedStream = stream; } public override bool CanRead { get { return AggregatedStream.CanRead; } } public override bool CanSeek { get { return AggregatedStream.CanSeek; } } public override bool CanWrite { get { return AggregatedStream.CanWrite; } } public override void Flush() { AggregatedStream.Flush(); } public override long Length { get { return AggregatedStream.Length; } } public override long Position { get { return AggregatedStream.Position; } set { AggregatedStream.Position = value; } } public override int Read(byte[] buffer, int offset, int count) { int bytesRead = AggregatedStream.Read(buffer, offset, count); return bytesRead; } public override long Seek(long offset, SeekOrigin origin) { return AggregatedStream.Seek(offset, origin); } public override void SetLength(long value) { AggregatedStream.SetLength(value); } public override void Write(byte[] buffer, int offset, int count) { AggregatedStream.Write(buffer, offset, count); } } class Program { static void Main(string[] args) { const string HostName = "as400"; TcpClient tcpClient = new TcpClient(HostName, 992); SslStream sslStream = new SslStream(new DebugStream(tcpClient.GetStream()), false, null, null, EncryptionPolicy.AllowNoEncryption); sslStream.AuthenticateAsClient(HostName, null, SslProtocols.Ssl3, false); } } }

Read the article

How to debug SITE.MASTER ASPX file?

- by salvationishere

I am developing a C#/SQL VS 2008 website application and I'm trying to set breakpoints in my site.master file--is there a way to do this? The contents of this file are: <%@ Master Language="C#" AutoEventWireup="true" CodeFile="Site.master.cs" Inherits="Site" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title>Forms Authentication, Authorization, and User Accounts</title> <link href="Styles.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="wrapper"> <form id="form1" runat="server"> <div id="header"> <span class="title">User Account Tutorials</span><br /> <span class="breadcrumb"> <asp:SiteMapPath ID="SiteMapPath1" runat="server"> </asp:SiteMapPath> </span> </div> <div id="content"> <asp:ContentPlaceHolder ID="MainContent" runat="server">  </asp:ContentPlaceHolder> </div> <div id="navigation"> <asp:ContentPlaceHolder ID="LoginContent" runat="server"> <asp:LoginView ID="LoginView1" runat="server"> <LoggedInTemplate> Welcome back,<asp:LoginName ID="LoginName1" runat="server" /> </LoggedInTemplate> <AnonymousTemplate> Hello, stranger! </AnonymousTemplate> </asp:LoginView> <br /> <br /> </asp:ContentPlaceHolder> <asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Logout.aspx" /> <ul> <li> <asp:HyperLink runat="server" ID="lnkHome" NavigateUrl="~/Default.aspx">Home</asp:HyperLink> </li> <asp:Repeater runat="server" ID="menu" DataSourceID="SiteMapDataSource1"> <ItemTemplate> <li> <asp:HyperLink ID="lnkMenuItem" runat="server" NavigateUrl='<%# Eval("Url") %>'><%# Eval("Title") %></asp:HyperLink> <asp:Repeater ID="submenu" runat="server" DataSource="<%# ((SiteMapNode) Container.DataItem).ChildNodes %>"> <HeaderTemplate> <ul> </HeaderTemplate> <ItemTemplate> <li> <asp:HyperLink ID="lnkMenuItem" runat="server" NavigateUrl='<%# Eval("Url") %>'><%# Eval("Title") %></asp:HyperLink> </li> </ItemTemplate> <FooterTemplate> </ul> </FooterTemplate> </asp:Repeater> </li> </ItemTemplate> </asp:Repeater> </ul> <asp:SiteMapDataSource ID="SiteMapDataSource1" runat="server" ShowStartingNode="false" /> </div> </form> </div> </body> </html>

Read the article

Survey Data Model - How to avoid EAV and excessive denormalization?

- by AlexDPC

Hi everyone, My database skills are mediocre at best and I have to design a data model for survey data. I have spent some thoughts on this and right now I feel that I am stuck between some kind of EAV model and a design involving hundreds of tables, each with hundreds of columns (and thousands of records). There must be a better way to do this and I hope that the wise folks on this forum can help me. I have already searched various forums, but I couldn't really find a solution. If it has already been given elsewhere, please excuse me and provide me with a link so I can read it up. Some assumptions about the data I have to deal with: Each survey consists of 1 to n questionnaires Each questionnaire consists of 100-2,000 questions (please ignore that 2,000 questions really sound like a lot to answer...) Questions can be of various types: multiple-choice, free text, a number (like age, income, percentages, ...) Each survey involves 10-200 countries (These are not the respondents. The respondents are actually people in the countries.) Depending on the type of questionnaire, each questionnaire is answered by 100-20,000 respondents per country. A country can adapt the questionnaires for a survey, i.e. add, remove or edit questions The data for one country is gathered in a separate database in that country. There is no possibility for online integration from the start. The data for all countries has to be integrated later. This means for example, if a country has deleted a question, that data must somehow be derived from what they sent in order to achieve a uniform design across all countries I will have to write the integration and cleaning software, which will need to work with every country's data In the end the data needs to be exported to flat files, one rectangular grid per country and questionnaire. I have already discussed this topic with people from various backgrounds and have not come to a good solution yet. I mainly got two kinds of opinions. The domain experts, who are used to working with flat files (spreadsheet-style) for data processing and analysis vote for a denormalized structure with loads of tables and columns as I described above (1 table per country and questionnaire). This sounds terrible to me, because I learned that wide tables are to be avoided, it will be annoying to determine which columns are actually in a table when working with it, the database will become cluttered with hundreds of tables (or I even need to set up multiple databases, each with a similar yet a bit differetn design), etc. O-O-programmers vote for a strongly "normalized" design, which would effectively lead to a central table containing all the answers from all respondents to all questions. This table would either need to contain a column of type sql_variant type or multiple answer columns with different types to store answers of different types (multiple choice, free text, ..). The former would essentially be a EAV model. I tend to follow Joe Celko here, who strongly discourages its use (he calls it OTLT or "One True Lookup Table"). The latter would imply that each row would contain null cells for the not applicable types by design. Another alternative I could think of would be to create one table per answer type, i.e., one for multiple-choice questions, one for free text questions, etc.. That's not so generic, it would lead to a lot of union joins, I think and I would have to add a table if a new answer type is invented. Sorry for boring you with all this text and thank you for your input! Cheers, Alex PS: I asked the same question here: http://www.eggheadcafe.com/community/aspnet/13/10242616/survey-data-model--how-to-avoid-eav-and-excessive-denormalization.aspx

Read the article

OpenVPN (HideMyAss) client on Ubuntu: Route only HTTP traffic

- by Andersmith

I want to use HideMyAss VPN (hidemyass.com) on Ubuntu Linux to route only HTTP (ports 80 & 443) traffic to the HideMyAss VPN server, and leave all the other traffic (MySQL, SSH, etc.) alone. I'm running Ubuntu on AWS EC2 instances. The problem is that when I try and run the default HMA script, I suddenly can't SSH into the Ubuntu instance anymore and have to reboot it from the AWS console. I suspect the Ubuntu instance will also have trouble connecting to the RDS MySQL database, but haven't confirmed it. HMA uses OpenVPN like this: sudo openvpn client.cfg The client configuration file (client.cfg) looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client auth-user-pass #management-query-passwords #management-hold # Disable management port for debugging port issues #management 127.0.0.1 13010 ping 5 ping-exit 30 # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. #;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. # All VPN Servers are added at the very end ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. # We order the hosts according to number of connections. # So no need to randomize the list # remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ./keys/ca.crt cert ./keys/hmauser.crt key ./keys/hmauser.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ;ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. #comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 # Detect proxy auto matically #auto-proxy # Need this for Vista connection issue route-metric 1 # Get rid of the cached password warning #auth-nocache #show-net-up #dhcp-renew #dhcp-release #route-delay 0 120 # added to prevent MITM attack ns-cert-type server # # Remote servers added dynamically by the master server # DO NOT CHANGE below this line # remote-random remote 173.242.116.200 443 # 0 remote 38.121.77.74 443 # 0 # etc... remote 67.23.177.5 443 # 0 remote 46.19.136.130 443 # 0 remote 173.254.207.2 443 # 0 # END

Read the article

Rails: (Devise) Two different methods for new users?

- by neezer

I have a Rails 3 app with authentication setup using Devise with the registerable module enabled. I want to have new users who sign up using our outside register form to use the full Devise registerable module, which is happening now. However, I also want the admin user to be able to create new users directly, bypassing (I think) Devise's registerable module. With registerable disabled, my standard UsersController works as I want it to for the admin user, just like any other Rail scaffold. However, now new users can't register on their own. With registerable enabled, my standard UsersController is never called for the new user action (calling Devise::RegistrationsController instead), and my CRUD actions don't seem to work at all (I get dumped back onto my root page with no new user created and no flash message). Here's the log from the request: Started POST "/users" for 127.0.0.1 at 2010-12-20 11:49:31 -0500 Processing by Devise::RegistrationsController#create as HTML Parameters: {"utf8"=>"?", "authenticity_token"=>"18697r4syNNWHfMTkDCwcDYphjos+68rPFsaYKVjo8Y=", "user"=>{"email"=>"[email protected]", "password"=>"[FILTERED]", "password_confirmation"=>"[FILTERED]", "role"=>"manager"}, "commit"=>"Create User"} SQL (0.9ms) ... User Load (0.6ms) SELECT "users".* FROM "users" WHERE ("users"."id" = 2) LIMIT 1 SQL (0.9ms) ... Redirected to http://test-app.local/ Completed 302 Found in 192ms ... but I am able to register new users through the outside form. How can I get both of these methods to work together, such that my admin user can manually create new users and guest users can register on their own? I have my Users controller setup for standard CRUD: class UsersController < ApplicationController load_and_authorize_resource def index @users = User.where("id NOT IN (?)", current_user.id) # don't display the current user in the users list; go to account management to edit current user details end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save flash[:notice] = "#{ @user.email } created." redirect_to users_path else render :action => 'new' end end def edit end def update params[:user].delete(:password) if params[:user][:password].blank? params[:user].delete(:password_confirmation) if params[:user][:password].blank? and params[:user][:password_confirmation].blank? if @user.update_attributes(params[:user]) flash[:notice] = "Successfully updated User." redirect_to users_path else render :action => 'edit' end end def delete end def destroy redirect_to users_path and return if params[:cancel] if @user.destroy flash[:notice] = "#{ @user.email } deleted." redirect_to users_path end end end And my routes setup as follows: TestApp::Application.routes.draw do devise_for :users devise_scope :user do get "/login", :to => "devise/sessions#new", :as => :new_user_session get "/logout", :to => "devise/sessions#destroy", :as => :destroy_user_session end resources :users do get :delete, :on => :member end authenticate :user do root :to => "application#index" end root :to => "devise/session#new" end

Read the article

I can connect to Samba server but cannot access shares.

- by jlego

I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

Read the article

Wireshark does not see interfaces (winXP)

- by bua

Short story: Wireshark is working....on my winXP-32b ... usage .... Long long time later Wireshark does not work It can't find any usefull interface (just VPN) ipconfig /all Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1490 Dual Band WLAN Mini-Card Physical Address. . . . . . . . . : SOME VALID MAC Ethernet adapter eth0: Connection-specific DNS Suffix . : xxxx Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller Physical Address. . . . . . . . . : SOME VALID MAC Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.12.68 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168..... ..... Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Fortinet virtual adapter Physical Address. . . . . . . . . : SOME VALID MAC Following steps didn't help: Several Wireshark re-installation Several LIBPCAP re installation SP3 for winXP Any ideas welcome.

Read the article

Java, LDAP: Make it not ignore blank passwords?

- by Steve

I'm maintaining some legacy Java LDAP code. I know next to nothing about LDAP. The program below basically just sends the userid and password to the LDAP server, receives notification back if the credentials are good. If so, it prints out the LDAP attributes received from the LDAP server, if not it prints out an exception. All works well if a bad password is given. An "invalid credentials" exception gets thrown. However, if a blank password is sent to the LDAP Server, authentication will still happen, LDAP attributes will still be returned. Is this unhappy situation due to the LDAP server allowing blank passwords, or does the code below need to be adjusted such a blank password will get fed to the LDAP server in such a way so it will get rejected? I do have data validation in place. I took it off in a testing environment to solve another issue and noticed this problem. I would prefer not to have this problem underneath the data validation. Thanks much in advance for any information import javax.naming.*; import javax.naming.directory.*; import java.util.*; import java.sql.*; public class LDAPTEST { public static void main(String args[]) { String lcf = "com.sun.jndi.ldap.LdapCtxFactory"; String ldapurl = "ldaps://ldap-cit.smew.acme.com:636/o=acme.com"; String loginid = "George.Jetson"; String password = ""; DirContext ctx = null; Hashtable env = new Hashtable(); Attributes attr = null; Attributes resultsAttrs = null; SearchResult result = null; NamingEnumeration results = null; int iResults = 0; int iAttributes = 0; env.put(Context.INITIAL_CONTEXT_FACTORY, lcf); env.put(Context.PROVIDER_URL, ldapurl); env.put(Context.SECURITY_PROTOCOL, "ssl"); env.put(Context.SECURITY_AUTHENTICATION, "simple"); env.put(Context.SECURITY_PRINCIPAL, "uid=" + loginid + ",ou=People,o=acme.com"); env.put(Context.SECURITY_CREDENTIALS, password); try { ctx = new InitialDirContext(env); attr = new BasicAttributes(true); attr.put(new BasicAttribute("uid",loginid)); results = ctx.search("ou=People",attr); while (results.hasMore()) { result = (SearchResult)results.next(); resultsAttrs = result.getAttributes(); for (NamingEnumeration enumAttributes = resultsAttrs.getAll(); enumAttributes.hasMore();) { Attribute a = (Attribute)enumAttributes.next(); System.out.println("attribute: " + a.getID() + " : " + a.get().toString()); iAttributes++; }// end for loop iResults++; }// end while loop System.out.println("Records == " + iResults + " Attributes: " + iAttributes); }// end try catch (Exception e) { e.printStackTrace(); } }// end function main() }// end class LDAPTEST

Read the article

Async networking + threading problem

- by randallmeadows

I kick off a network request, assuming no login credentials are required to talk to the destination server. If they are required, then I get an authentication challenge, at which point I display a view requesting said credentials from the user. When they are supplied, I restart the network request, using those credentials. That's all fine and dandy, as long as I only do one request at a time. But I'm not, typically. When both requests are kicked off, I get the first challenge, and present the prompt (using -presentModalViewController:). Then the 2nd challenge comes in. And I crash when it tries to display the 2nd prompt. I have the bulk of this wrapped in an @synchronized() block, but this has no effect because these delegate methods are all being called on the same (main) thread. The docs say the delegate methods are called on the same thread in which the connection was started. OK, no problem; I'll just write a method that I run on a background thread using -performSelectorInBackground: NSURLConnection *connection = [[NSURLConnection alloc] initWithRequest:request delegate:self startImmediately:NO]; [connections addObject:connection]; [self performSelectorInBackground:@selector(startConnection:) withObject:connection]; [connection release]; - (void)startConnection:(NSURLConnection *)connection { NSAutoreleasePool *pool = [NSAutoreleasePool new]; [connection scheduleInRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; [connection start]; [pool drain]; } which should put every network request, and its callbacks, on its own thread, and then my @synchronized() blocks will take effect. The docs for -initWithRequest:... state "Messages to the delegate will be sent on the thread that calls this method. By default, for the connection to work correctly the calling thread’s run loop must be operating in the default run loop mode." Ok, I'm doing that. They also state "If you pass NO [for startImmediately], you must schedule the connection in a run loop before starting it." OK, I'm doing that, too. Furthermore, the docs for NSRunLoop state "Each NSThread object, including the application’s main thread, has an NSRunLoop object automatically created for it as needed. If you need to access the current thread’s run loop, you do so with the class method currentRunLoop." I'm assuming this applies to the background thread created by the call -performSelectorInBackground... (which does appear to be the case, when I execute 'po [NSClassFromString(@"NSRunLoop") currentRunLoop]' in the -startConnection: method). The -startConnection: method is indeed being called. But after kicking off the connection, I now never get any callbacks on it. None of the -connectionDid… delegate methods. (I even tried explicitly starting the thread's run loop, but that made no difference; I've used threads like this before, and I've never had to start the run loop manually before--but I'm now grasping at straws...) I think I've come up with a workaround such that I only handle one request at a time, but it's kludgy and I'd like to do this the Right Way. But, what am I missing here? Thanks! randy

Read the article

Different Service behaviors per endpoint

- by Preben Huybrechts

The situation We are implementing different sort of security on some WCF service. ClientCertificate, UserName & Password and Anonymous. We have 2 ServiceBehaviorConfigurations, one for httpBinding and one for wsHttpBinding. (We have custom authorization policies for claim based security) As a requirement we need different endpoints for each service. 3 endpoints with httpBinding and 1 with wsHttpBinding. Example for one service: basicHttpBinding : Anonymous basicHttpBinding : UserNameAndPassword basicHttpBinding : BasicSsl wsHttpBinding : BasicSsl The Problem Part 1: We cannot specify the same service twice, once with the http service configuration and once with the wsHttp service configuration. Part 2: We cannot specify service behaviors on an endpoint. (Throws and exception, No endpoint behavior was found... Service behaviors cant be set to endpoint behaviours) The Config For part 1: <services> <service name="Namespace.MyService" behaviorConfiguration="securityBehavior"> <endpoint address="http://server:94/MyService.svc/Anonymous" contract="Namespace.IMyService" binding="basicHttpBinding" bindingConfiguration="Anonymous"> </endpoint> <endpoint address="http://server:94/MyService.svc/UserNameAndPassword" contract="Namespace.IMyService" binding="basicHttpBinding" bindingConfiguration="UserNameAndPassword"> </endpoint> <endpoint address="https://server/MyService.svc/BasicSsl" contract="Namespace.IMyService" binding="basicHttpBinding" bindingConfiguration="BasicSecured"> </endpoint> </service> <service name="Namespace.MyService" behaviorConfiguration="wsHttpCertificateBehavior"> <endpoint address="https://server/MyService.svc/ClientCert" contract="Namespace.IMyService" binding="wsHttpBinding" bindingConfiguration="ClientCert"/> </service> </services> Service Behavior configuration: <serviceBehaviors> <behavior name="securityBehavior"> <serviceAuthorization serviceAuthorizationManagerType="Namespace.AdamAuthorizationManager,Assembly"> <authorizationPolicies> <add policyType="Namespace.AdamAuthorizationManager,Assembly" /> </authorizationPolicies> </serviceAuthorization> </behavior> <behavior name="wsHttpCertificateBehavior"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true"/> <serviceAuthorization serviceAuthorizationManagerType="Namespace.AdamAuthorizationManager,Assembly"> <authorizationPolicies> <add policyType="Namespace.AdamAuthorizationManager,Assembly" /> </authorizationPolicies> </serviceAuthorization> <serviceCredentials> <clientCertificate> <authentication certificateValidationMode="PeerOrChainTrust" revocationMode="NoCheck"/> </clientCertificate> <serviceCertificate findValue="CN=CertSubject"/> </serviceCredentials> </behavior> How can we specify a different service behaviour on the WsHttpBinding endpoint? Or how can we apply our authorization policy in a different way for wsHttpBinding then basicHttpBinding. We would use endpoint behavior but we can't specify our authorization policy on an endpoint behavior

Read the article

Update transaction in SQL Server 2008 R2 from ASP.Net not working

- by Amarus

Hello! Even though I've been a stalker here for ages, this is the first post I'm making. Hopefully, it won't end here and more optimistically future posts might actually be me trying to give a hand to someone else, I do owe this community that much and more. Now, what I'm trying to do is simple and most probably the reason behind it not working is my own stupidity. However, I'm stumped here. I'm working on an ASP.Net website that interacts with an SQL Server 2008 R2 database. So far everything has been going okay but updating a row (or more) just won't work. I even tried copying and pasting code from this site and others but it's always the same thing. In short: No exception or errors are shown when the update command executes (it even gives the correct count of affected rows) but no changes are actually made on the database. Here's a simplified version of my code (the original had more commands and tons of parameters each, but even when it's like this it doesn't work): protected void btSubmit_Click(object sender, EventArgs e) { using (SqlConnection connection = new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString)) { string commandString = "UPDATE [impoundLotAlpha].[dbo].[Vehicle]" + "SET [VehicleMake] = @VehicleMake" + " WHERE [ComplaintID] = @ComplaintID"; using (SqlCommand command = new SqlCommand(commandString, connection)) { SqlTransaction transaction = null; try { command.Connection.Open(); transaction = connection.BeginTransaction(IsolationLevel.Serializable); command.Transaction = transaction; SqlParameter complaintID = new SqlParameter("@complaintID", SqlDbType.Int); complaintID.Value = HttpContext.Current.Request.QueryString["complaintID"]; command.Parameters.Add(complaintID); SqlParameter VehicleMake = new SqlParameter("@VehicleMake", SqlDbType.VarChar, 20); VehicleMake.Value = tbVehicleMake.Text; command.Parameters.Add(VehicleMake); command.ExecuteNonQuery(); transaction.Commit(); } catch { transaction.Rollback(); throw; } finally { connection.Close(); } } } } I've tried this with the "SqlTransaction" stuff and without it and nothing changes. Also, since I'm doing multiple updates at once, I want to have them act as a single transaction. I've found that it can be either done like this or by use of the classes included in the System.Transactions namespace (CommittableTransaction, TransactionScope...). I tried all I could find but didn't get any different results. The connection string in web.config is as follows: <connectionStrings> <add name="ApplicationServices" connectionString="Data Source=localhost;Initial Catalog=ImpoundLotAlpha;Integrated Security=True" providerName="System.Data.SqlClient"/> </connectionStrings> So, tldr; version: What is the mistake that I did with that record update attempt? (Figured it out, check below if you're having a similar issue.) What is the best method to gather multiple update commands as a single transaction? Thanks in advance for any kind of help and/or suggestions! Edit: It seems that I was lacking some sleep yesterday cause this time it only took me 5 minutes to figure out my mistake. Apparently the update was working properly but I failed to notice that the textbox values were being overwritten in Page_Load. For some reason I had this part commented: if (IsPostBack) return; The second part of the question still stands. But should I post this as an answer to my own question or keep it like this?

Read the article

Doesn't get the output in Java Database Connectivity

- by Dooree

I'm working on Java Database Connectivity through Eclipse IDE. I built a database through Ubuntu Terminal, and I need to connect and work with it. However, when I tried to run the following code, I don't get any error, but the following output is showed, anybody knows why I don't get the output from the code ? //STEP 1. Import required packages import java.sql.*; public class FirstExample { // JDBC driver name and database URL static final String JDBC_DRIVER = "com.mysql.jdbc.Driver"; static final String DB_URL = "jdbc:mysql://localhost/EMP"; // Database credentials static final String USER = "username"; static final String PASS = "password"; public static void main(String[] args) { Connection conn = null; Statement stmt = null; try{ //STEP 2: Register JDBC driver Class.forName("com.mysql.jdbc.Driver"); //STEP 3: Open a connection System.out.println("Connecting to database..."); conn = DriverManager.getConnection(DB_URL,USER,PASS); //STEP 4: Execute a query System.out.println("Creating statement..."); stmt = conn.createStatement(); String sql; sql = "SELECT id, first, last, age FROM Employees"; ResultSet rs = stmt.executeQuery(sql); //STEP 5: Extract data from result set while(rs.next()){ //Retrieve by column name int id = rs.getInt("id"); int age = rs.getInt("age"); String first = rs.getString("first"); String last = rs.getString("last"); //Display values System.out.print("ID: " + id); System.out.print(", Age: " + age); System.out.print(", First: " + first); System.out.println(", Last: " + last); } //STEP 6: Clean-up environment rs.close(); stmt.close(); conn.close(); }catch(SQLException se){ //Handle errors for JDBC se.printStackTrace(); }catch(Exception e){ //Handle errors for Class.forName e.printStackTrace(); }finally{ //finally block used to close resources try{ if(stmt!=null) stmt.close(); }catch(SQLException se2){ }// nothing we can do try{ if(conn!=null) conn.close(); }catch(SQLException se){ se.printStackTrace(); }//end finally try }//end try System.out.println("Goodbye!"); }//end main }//end FirstExample <ConnectionProperties> <PropertyCategory name="Connection/Authentication"> <Property name="user" required="No" default="" sortOrder="-2147483647" since="all"> The user to connect as </Property> <Property name="password" required="No" default="" sortOrder="-2147483646" since="all"> The password to use when connecting </Property> <Property name="socketFactory" required="No" default="com.mysql.jdbc.StandardSocketFactory" sortOrder="4" since="3.0.3"> The name of the class that the driver should use for creating socket connections to the server. This class must implement the interface 'com.mysql.jdbc.SocketFactory' and have public no-args constructor. </Property> <Property name="connectTimeout" required="No" default="0" sortOrder="9" since="3.0.1"> Timeout for socket connect (in milliseconds), with 0 being no timeout. Only works on JDK-1.4 or newer. Defaults to '0'. </Property> ...

Read the article

Two forms are being called from one view.One encodes the russian text the doesn't.

- by Daniel

The menu I want to show to the users changes depending on their rights After user authentication I redirect to my menu action which calls its view access/menu.html.erb <% if admin? %> <%form_for(:user, :url => {:controller => 'admin_users',:name => session[:username]}) do |admin|%> <ul><h2>Administrator: <%=session[:username]%></h2></ul> <%= render(:partial =>'admin_form',:locals => {:admin => admin})%> <%end%> <%else%> <%form_for(:user, :url => {:controller => 'students',:name => session[:username]}) do |student|%> <ul><h2>???????: <%=session[:surname].to_s + " " + session[:name].to_s%></h2></ul> <%= render(:partial =>'student_form',:locals => {:student => student})%> <%end%> <%end%> And the forms look: _student_form: <table> <ul> <li><%=link_to '?????',{:controller => 'students'}%></li> </ul> <ul> <li><%=link_to '?????? ?????????',{:controller => 'students'}%></li> </ul> <ul> <li><%=link_to '???????? ?????? ????',{:controller => 'students'}%></li> </ul> <ul> <li><%=link_to '???????? ??????',{:controller => 'students'}%></li> </ul> <ul> <td> </td> </ul> </table> _admin_form: <table> <ul> <li><%=link_to '?????????? ????????????????',{:controller => 'AdminUsers',:role_id => 1}%></li> </ul> <ul> <li><%=link_to '?????????? ????????',{:controller => 'AdminUsers',:role_id => 2}%></li> </ul> <ul> <li><%=link_to '?????????? ??????????',{:controller => 'AdminUsers',:role_id => 3}%></li> </ul> <ul> <li><%=link_to '?????????? ???????????',:controller => 'subjects'%></li> </ul> <ul> <td> </td> </ul> </table> If a log in as a student I get: But if I log in as an administrator I get How can this be posible??

Read the article

pass arraylist bean from android to webservice php

- by user1547432

i'm newbie in android with web service i'm trying to pass arraylist from android to webservice php server here's my bean code: public class ExpressionBean { public static final String EXPRESSION_ID = "expressionID"; public static final String EXPRESSION_TEXT = "expressionText"; public static final String ANS_TEXT1 = "ansText1"; public static final String ANS_TEXT2 = "ansText2"; public static final String ASSESSEE_ANSWER = "assesseeAnswer"; private String expressionID; private String expressionText; private String ansText1; private String ansText2; private String assesseeAnswer; public String getExpressionID() { return expressionID; } public void setExpressionID(String expressionID) { this.expressionID = expressionID; } public String getExpressionText() { return expressionText; } public void setExpressionText(String expressionText) { this.expressionText = expressionText; } public String getAnsText1() { return ansText1; } public void setAnsText1(String ansText1) { this.ansText1 = ansText1; } public String getAnsText2() { return ansText2; } public void setAnsText2(String ansText2) { this.ansText2 = ansText2; } public String getAssesseeAnswer() { return assesseeAnswer; } public void setAssesseeAnswer(String assesseeAnswer) { this.assesseeAnswer = assesseeAnswer; } } and here's my doInBackround on async task : protected Boolean doInBackground(Void... params) { // TODO: attempt authentication against a network service. boolean result = false; // test = new TestBean(); // int resultTest = 0; UserFunctions userFunction = new UserFunctions(); Log.d(TAG, "UID : " + mEmail); // Log.d(TAG, "resultTest : " + resultTest); JSONObject jsonTest = userFunction.storeTest(mEmail); Log.d(TAG, "After JSON TEST "); try { if (jsonTest.getString(KEY_SUCCESS) != null) { String res = jsonTest.getString(KEY_SUCCESS); JSONObject testData = jsonTest.getJSONObject(TAG_TEST); test = new TestBean(); test.setTestid(testData.getInt(TAG_TEST_ID)); test.setUid(testData.getInt(TAG_UID)); JSONArray list = new JSONArray(); String list2; for (int position = 0; position < expressionList.size(); position++) { Gson gson = new Gson(); list.put(gson.toJson(expressionList.get(position))); } Log.d(TAG, "JSONArray list coy : " + list); UserFunctions uf = new UserFunctions(); JSONObject jsonHistoryList = new JSONObject(); jsonHistoryList = uf.storeHistoryList(list.toString()); if (Integer.parseInt(res) == 1) { result = true; finish(); } else { result = false; } } } catch (JSONException e) { e.printStackTrace(); return false; } // TODO: register the new account here. return result; } and here's storeHistoryList Method : public JSONObject storeHistoryList(String list) { // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("tag", storeHistory_tag)); params.add(new BasicNameValuePair("list", list)); JSONObject json = jsonParser.getJSONFromUrl(URL, params); return json; } i want to pass list to web service list is an arraylist ExpressionBean i used gson for convert bean to json but when i execute, the log said "error parsing data... jsonarray cannot be converted to jsonobject what i must to do? thanks

Read the article

Only Execute Code on Certain Requests Java

- by BillPull

I am building a little API for class and the teacher supplied us with a link to a tutorial that provided a simple webserver that implements Runnable. I have already written some code that will parse arguments the arguments ( or at least get me the request string ) and some code that will return some simple xml. however I think certain requests like the one for the favicon are sent I think it is messing up my code. I wrapped that in an if else but it does not seem to be working. package server; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.net.Socket; import java.util.*; import java.io.*; import java.net.*; import parkinglots.*; public class WorkerRunnable implements Runnable{ protected Socket clientSocket = null; protected String serverText = null; public WorkerRunnable(Socket clientSocket, String serverText) { this.clientSocket = clientSocket; this.serverText = serverText; } public Boolean authenticateAPI(String key){ //Authenticate Key against Stored Keys //TODO: Create Stored Keys and Compare return true; } public void run() { try { InputStream input = clientSocket.getInputStream(); OutputStream output = clientSocket.getOutputStream(); long time = System.currentTimeMillis(); //TODO: Parse args and output different formats and Authentication //Parse URL Arguments BufferedReader in = new BufferedReader( new InputStreamReader(clientSocket.getInputStream(), "8859_1")); String request = in.readLine(); //Server gets Favicon Request so skip that and goto args System.out.println(request); if ( request != "GET /favicon.ico HTTP/1.1" && request != "GET / HTTP/1.1" && request != null ){ String format = "", apikey =""; System.out.println("I am Here"); String request_location = request.split(" ")[1]; String request_args = request_location.replace("/",""); request_args = request_args.replace("?",""); String[] queries = request_args.split("&"); System.out.println(queries[0]); for ( int i = 0; i < queries.length; i++ ){ if( queries[i] == "format" ){ format = queries[i].split("=")[1]; } else if( queries[i] == "apikey" ){ apikey = queries[i].split("=")[1]; } } if( apikey == "" ){ apikey = "None"; } if( format == "" ){ format = "xml"; } Boolean auth = authenticateAPI(apikey); if ( auth ){ if ( format == "xml"){ // Retrieve XML Document String xml = LotFromDB.getParkingLotXML(); output.write((xml).getBytes()); }else{ //Retrieve JSON String json = LotFromDB.getParkingLotJSON(); output.write((json).getBytes()); } }else{ output.write(("Access Denied - User is Not Authenticated").getBytes()); } }else{ output.write(("Access Denied Must Pass API Key").getBytes()); } output.close(); input.close(); System.out.println("Request processed: " + time); } catch (IOException e) { //report exceptions e.printStackTrace(); } } } Console output I get I am Here format=json Request processed: 1333516648331 GET /favicon.ico HTTP/1.1 I am Here favicon.ico Request processed: 1333516648332 It always returns the XML as well. This is my first exposure to writing a web server and dealing with networking in Java, which frustrates me a lot in general, So any suggestions here are very appreciated.

Read the article

Opinions on Copy Protection / Software Licensing via phoning home?

- by Jakobud

I'm developing some software that I'm going to eventually sell. I've been thinking about different copy protection mechanisms, both custom and 3rd party. I know that no copy protection is 100% full-proof, but I need to at least try. So I'm looking for some opinions to my approach I'm thinking about: One method I'm thinking about is just having my software connect to a remote server when it starts up, in order to verify the license based off the MAC address of the ethernet port. I'm not sure if the server would be running a MySQL database that retrieves the license information, or what... Is there a more simple way? Maybe some type of encrypted file that is read? I would make the software still work if it can't connect to the server. I don't want to lock someone out just because they don't have internet access at that moment in time. In case you are wondering, the software I'm developing is extremely internet/network dependant. So its actually quite unlikely that the user wouldn't have internet access when using it. Actually, its pretty useless without internet/network access. Anyone know what I would do about computers that have multiple MAC addresses? A lot of motherboards these days have 2 ethernet ports. And most laptops have 1 ethernet, 1 wifi and Bluetooth MAC addresses. I suppose I could just pick a MAC port and run with it. Not sure if it really matters A smarty and tricky user could determine the server that the software is connecting to and perhaps add it to their host file so that it always trys to connect to localhost. How likely do you think this is? And do you think its possible for the software to check if this is being done? I guess parsing of the host file could always work. Look for your server address in there and see if its connecting to localhost or something. I've considered dongles, but I'm trying to avoid them just because I know they are a pain to work with. Keeping them updated and possibly requiring the customer to run their own license server is a bit too much for me. I've experienced that and it's a bit of a pain that I wouldn't want to put my customers through. Also I'm trying to avoid that extra overhead cost of using 3rd party dongles. Also, I'm leaning toward connecting to a remote server to verify authentication as opposed to just sending the user some sort of license file because what happens when the user buys a new computer? I have to send them a replacement license file that will work with their new computer, but they will still be able to use it on their old computer as well. There is no way for me to 'de-authorize' their old computer without asking them to run some program on it or something. Also, one important note, with the software I would make it very clear to the user in the EULA that the software connects to a remote server to verify licensing and that no personal information is sent. I know I don't care much for software that does that kinda stuff without me knowing. Anyways, just looking for some opinions for people who have maybe gone down this kinda road. It seems like remote-server-dependent-software would be one of the most effective copy-protection mechanisms, not just because of difficulty of circumventing, but also could be pretty easy to manage the licenses on the developers end.

Read the article

Upgrading from TFS 2010 RC to TFS 2010 RTM done

- by Martin Hinshelwood

Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010 – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes. We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system. Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010. Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010 and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS) It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release. Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers. Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later. You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery. Figure: Now we have everything setup the configuration wizard can do its work. Figure: Took a while on the “Web site” stage for some point, but zipped though after that. Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace: at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace: at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url) at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft. Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010. Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic. Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well. Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

Read the article

Installing UCMA 3.0 and Creating a Communications Server "14"Trusted Application Pool

A lot of setup and administration tasks have gotten a lot easier in Communications Server 14; one of them is building an application server to develop and run your UCMA 3.0 applications on. In this post, Ill walk you through installing the UCMA 3.0 Core SDK and creating a Trusted Application Pool on the server, thus adding it to the Communications Server 14 topology and allowing you to host and run UCMA 3.0 applications on it. Note: These instructions will change slightly as the bits get updated for the eventual Beta release I will update this post as soon as I get a chance to run this setup on a more recent build. Im doing the install on a simple Communications Server 14 topology consisting of the following Windows Server 2008 R2 Hyper-V images: DC Domain Controller ExchangeUM Exchange Server 2010 CS-SE Microsoft Communications Server 2010 Standard Edition TS Development machine Ill walk through setting up UCMA 3.0 on the TS VM, which is a fully patched Windows Server 2008 R2 machine that is joined to the Fabrikam domain. Im also running Visual Studio 2010 on this VM because I intend to use it as a development machine. In a future post, Ill walk through installing just the UCMA 3.0 run time to build a true production UCMA application server. Im making a couple of assumptions here: You have an existing CS 2010 site and cluster configured(well look at this in a future post) Youre starting with a fully patched Windows Server 2008 R2 machine The machine is joined to your domain This walkthrough was done in my Fabrikam VM environment but can easily be modified for your own environment. Installing the UCMA 3.0 SDK Lets start by installing the UCMA 3.0 SDK. Run UcmaSdkWebDownload.msi to kick off the SDK installer package extract process. The installed package is extracted to C: >> Program Files >> Microsoft UCMA 3.0 >> SDK Installer Package. Browse there and run setup.exe. Click Install to install the UCMA 3.0 Core SDK and Workflow SDK. Install Communications Server Core Components UCMA 3.0 introduces a new concept called Auto-provisioning, which is most easily explained from the developer point of view. Remember what your app.config looked it in UCMA 2.0? You had to store the application GRUU, the trusted contact SIP Uri, the port for your application, and the name of the certificate authority. Thats all gone with auto-provisioning all you need in your app.config is your ApplicationId, e.g.: urn:application:MyApplication. How does CS 2010 do this? All of the applications configuration data is associated with the applications id. UCMA also queries a replicated copy of the Central Management Database to retrieve the applications configuration data and also the configuration data for any endpoints. In this step, well run Bootstrapper.exe to install the CS Core components, this checked for the following components and installs them if they are not already present: VcRedist Sqlexpress Sqlnativeclient Sqlbackcompat Ucmaredist OcsCore.msi Open a command window at C: >> Program Files >> Microsoft Communications Server 2010 >> Deployment and run the following command: Bootstrapper.exe /BootstrapReplica /MinCache /SourceDirectory:"%ProgramFiles%\Microsoft UCMA 3.0\SDK Installer Package\Prereq\BootstrapperCache" Create a New Trusted Application Pool The next step is to create a new trusted application pool for the new server. Fire up the Communications Server Management Shell from Start >> Microsoft Communications Server 2010 >> Communications Server Management Shell and enter the following PowerShell command: New-CsTrustedApplicationPool -Identity <FQDN of Server> -Registrar <FQDN of CS Server> -Site <CS Site Name> Verify that the new server was added to the CS topology by running the following PowerShell command: (Get-CsTopology -AsXml).ToString() > Topology.xml This created a file called Topology.xml in the directory that you ran the command from. Open the file and find the Clusters section and look for a node for the new server. The Cluster Fqdn is the name of your server, and note the name of the Site that this Cluster is a part of. <Cluster Fqdn="appsrv.fabrikam.com" RequiresReplication="true" RequiresSetup="true"> <ClusterId SiteId="UcMarketing2" Number="5" /> <Machine OrdinalInCluster="1" Fqdn="appsrv.fabrikam.com"> <NetInterface InterfaceSide="Primary" InterfaceNumber="1" IPAddress="0.0.0.0" /> </Machine> </Cluster> Configure CS Management Store Replication At this point, we have the CS Core components installed and the server configured as a trusted application pool. We now need to set up replication so that the Central Management Store replicates down to the new server. From the Communications Server Management Shell, run the following PowerShell command to enable the Replica service on the new server: Enable-CSReplica The Replica service is enabled, but hasn't done anything yet. This can be verified by running the following PowerShell command to check the replication status for the various servers in the topology: Get-CSManagementStoreReplicationStatus You can see in the screenshot below that the UpToDate property of the new server is still False Run the following PowerShell command to force the replication to run: Invoke-CSManagementStoreReplicationStatus Run Get-CSManagementStoreReplicationStatus again to verify that the new service is now up to date Request and Set a New Certificate The last step in the process is to request a new certificate from the certificate authority on the domain and assign it to the new server. From the Communications Server Management Shell, run the following PowerShell command to request a new certificate: Request-CSCertificate -Action new -Type default -CA <Domain Controller FQDN>\<Certificate Authority> Setting the -Verbose switch on the cmdlet creates an Xml file with its output. Open the Xml file and copy the thumbprint of the generated certificate. <?xml version="1.0" encoding="utf-8"?> <Action Name="Request-CsCertificate" Time="20100512T212258"> <Action Name="Request-CsCertificate" Time="20100512T212258"> <Info Title="Connection" Time="20100512T212258">Data Source=(local)\rtclocal;Initial Catalog=xds;Integrated Security=True</Info> <Action Time="20100512T212258"> <Info Title="Certificate use" Time="20100512T212258">urn:certref:default</Info> <Info Title="Subject distinguished name" Time="20100512T212258">CN="appsrv2.fabrikam.com"</Info> <Info Time="20100512T212259">The certificate request is submitted to the Certification Authority dc.fabrikam.com\FabrikamCA.</Info> <Info Time="20100512T212259">The certificate was issued.</Info> <Info Time="20100512T212259">The certificate was imported with thumbprint AFC3C46E459C1A39AD06247676F3555826DBF705.</Info> <Complete Time="20100512T212259" /> </Action> <Info Title="command status" Time="20100512T212259">Command execution processing completed</Info> <Action Name="DeploymentXdsCmdlet.SaveCachedItems" Time="20100512T212259"> <Info Time="20100512T212259">0 updates</Info> <Complete Time="20100512T212259" /> </Action> <Info Title="command status" Time="20100512T212259">Command has completed</Info> </Action> </Action> Run the following PowerShell command to set the certificate: Set-CsCertificate -Type Default -Thumbprint <Thumbprint> Wrapping Up You now have a new UCMA 3.0 application server in your Communications Server 2010 server topology. You can provision trusted applications and trusted application endpoints on the new server using the Communications Server 2010 Management Shell. Well take a look at how to do that in another post. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Preventing duplicate Data with ASP.NET AJAX

- by Yousef_Jadallah

Some times you need to prevent User names ,E-mail ID's or other values from being duplicated by a new user during Registration or any other cases,So I will add a simple approach to make the page more user-friendly. Instead the user filled all the Registration fields then press submit after that received a message as a result of PostBack that "THIS USERNAME IS EXIST", Ajax tidies this up by allowing asynchronous querying while the user is still completing the registration form. ASP.NET enables you to create Web services can be accessed from client script in Web pages by using AJAX technology to make Web service calls. Data is exchanged asynchronously between client and server, typically in JSON format. I’ve added an article to show you step by step how to use ASP.NET AJAX with Web Services , you can find it here . Lets go a head with the steps : 1-Create a new project , if you are using VS 2005 you have to create ASP.NET Ajax Enabled Web site. 2-Create your own Database which contain user table that have User_Name field. for Testing I’ve added SQL Server Database that come with Dot Net 2008: Then I’ve created tblUsers: This table and this structure just for our example, you can use your own table to implement this approach. 3-Add new Item to your project or website, Choose Web Service file, lets say WebService.cs .In this Web Service file import System.Data.SqlClient Namespace, Then Add your web method that contain string parameter which received the Username parameter from the Script , Finally don’t forget to qualified the Web Service Class with the ScriptServiceAttribute attribute ([System.Web.Script.Services.ScriptService]) using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Services; using System.Data.SqlClient; [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [System.Web.Script.Services.ScriptService] public class WebService : System.Web.Services.WebService { [WebMethod] public int CheckDuplicate(string User_Name) { string strConn = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\TestDB.mdf;Integrated Security=True;User Instance=True"; string strQuery = "SELECT COUNT(*) FROM tblUsers WHERE User_Name = @User_Name"; SqlConnection con = new SqlConnection(strConn); SqlCommand cmd = new SqlCommand(strQuery, con); cmd.Parameters.Add("User_Name", User_Name); con.Open(); int RetVal= (int)cmd.ExecuteScalar(); con.Close(); return RetVal; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Our Web Method here is CheckDuplicate Which accept User_Name String as a parameter and return number of the rows , if the name will found in the database this method will return 1 else it will return 0. I’ve applied [WebMethod] Attribute to our method CheckDuplicate, And applied the ScriptService attribute to a Web Service class named WebService. 4-Add this simple Registration form : <fieldset> <table id="TblRegistratoin" cellpadding="0" cellspacing="0"> <tr> <td> User Name </td> <td> <asp:TextBox ID="txtUserName" onblur="CallWebMethod();" runat="server"></asp:TextBox> </td> <td> <asp:Label ID="lblDuplicate" runat="server" ForeColor="Red" Text=""></asp:Label> </td> </tr> <tr> <td colspan="3"> <asp:Button ID="btnRegistration" runat="server" Text="Registration" /> </td> </tr> </table> </fieldset> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } onblur event is added to the Textbox txtUserName, This event Fires when the Textbox loses the input focus, That mean after the user get focus out from the Textbox CallWebMethod function will be fired. CallWebMethod will be implemented in step 6. 5-Add ScriptManager Control to your aspx file then reference the Web service by adding an asp:ServiceReference child element to the ScriptManager control and setting its path attribute to point to the Web service, That generate a JavaScript proxy class for calling the specified Web service from client script. <asp:ScriptManager runat="server" ID="scriptManager"> <Services> <asp:ServiceReference Path="WebService.asmx" /> </Services> </asp:ScriptManager> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 6-Define the JavaScript code to call the Web Service : <script language="javascript" type="text/javascript"> // This function calls the Web service method // passing simple type parameters and the // callback function function CallWebMethod() { var User_Name = document.getElementById('<%=txtUserName.ClientID %>').value; WebService.CheckDuplicate(User_Name, OnSucceeded, OnError); } // This is the callback function invoked if the Web service // succeeded function OnSucceeded(result) { var rsltElement = document.getElementById("lblDuplicate"); if (result == 1) rsltElement.innerHTML = "This User Name is exist"; else rsltElement.innerHTML = ""; } function OnError(error) { // Display the error. alert("Service Error: " + error.get_message()); } </script> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This call references the WebService Class and CheckDuplicate Web Method defined in the service. It passes a User_Name value obtained from a textbox as well as a callback function named OnSucceeded that should be invoked when the asynchronous Web Service call returns. If the Web Service in different Namespace you can refer it before the class name this Main formula may help you : NameSpaceName.ClassName.WebMethdName(Parameters , Success callback function, Error callback function); Parameters: you can pass one or many parameters. Success callback function :handles returned data from the service . Error callback function :Any errors that occur when the Web Service is called will trigger in this function. Using Error Callback function is optional. Hope these steps help you to understand this approach.

Read the article

Preventing duplicate Data with ASP.NET AJAX

- by Yousef_Jadallah

Some times you need to prevent User names ,E-mail ID's or other values from being duplicated by a new user during Registration or any other cases,So I will add a simple approach to make the page more user-friendly. Instead the user filled all the Registration fields then press submit after that received a message as a result of PostBack that "THIS USERNAME IS EXIST", Ajax tidies this up by allowing asynchronous querying while the user is still completing the registration form. ASP.NET enables you to create Web services can be accessed from client script in Web pages by using AJAX technology to make Web service calls. Data is exchanged asynchronously between client and server, typically in JSON format. I’ve added an article to show you step by step how to use ASP.NET AJAX with Web Services , you can find it here . Lets go a head with the steps : 1-Create a new project , if you are using VS 2005 you have to create ASP.NET Ajax Enabled Web site. 2-Create your own Database which contain user table that have User_Name field. for Testing I’ve added SQL Server Database that come with Dot Net 2008: Then I’ve created tblUsers: This table and this structure just for our example, you can use your own table to implement this approach. 3-Add new Item to your project or website, Choose Web Service file, lets say WebService.cs .In this Web Service file import System.Data.SqlClient Namespace, Then Add your web method that contain string parameter which received the Username parameter from the Script , Finally don’t forget to qualified the Web Service Class with the ScriptServiceAttribute attribute ([System.Web.Script.Services.ScriptService]) using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Services; using System.Data.SqlClient; [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [System.Web.Script.Services.ScriptService] public class WebService : System.Web.Services.WebService { [WebMethod] public int CheckDuplicate(string User_Name) { string strConn = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\TestDB.mdf;Integrated Security=True;User Instance=True"; string strQuery = "SELECT COUNT(*) FROM tblUsers WHERE User_Name = @User_Name"; SqlConnection con = new SqlConnection(strConn); SqlCommand cmd = new SqlCommand(strQuery, con); cmd.Parameters.Add("User_Name", User_Name); con.Open(); int RetVal= (int)cmd.ExecuteScalar(); con.Close(); return RetVal; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Our Web Method here is CheckDuplicate Which accept User_Name String as a parameter and return number of the rows , if the name will found in the database this method will return 1 else it will return 0. I’ve applied [WebMethod] Attribute to our method CheckDuplicate, And applied the ScriptService attribute to a Web Service class named WebService. 4-Add this simple Registration form : <fieldset> <table id="TblRegistratoin" cellpadding="0" cellspacing="0"> <tr> <td> User Name </td> <td> <asp:TextBox ID="txtUserName" onblur="CallWebMethod();" runat="server"></asp:TextBox> </td> <td> <asp:Label ID="lblDuplicate" runat="server" ForeColor="Red" Text=""></asp:Label> </td> </tr> <tr> <td colspan="3"> <asp:Button ID="btnRegistration" runat="server" Text="Registration" /> </td> </tr> </table> </fieldset> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } onblur event is added to the Textbox txtUserName, This event Fires when the Textbox loses the input focus, That mean after the user get focus out from the Textbox CallWebMethod function will be fired. CallWebMethod will be implemented in step 6. 5-Add ScriptManager Control to your aspx file then reference the Web service by adding an asp:ServiceReference child element to the ScriptManager control and setting its path attribute to point to the Web service, That generate a JavaScript proxy class for calling the specified Web service from client script. <asp:ScriptManager runat="server" ID="scriptManager"> <Services> <asp:ServiceReference Path="WebService.asmx" /> </Services> </asp:ScriptManager> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 6-Define the JavaScript code to call the Web Service : <script language="javascript" type="text/javascript"> // This function calls the Web service method // passing simple type parameters and the // callback function function CallWebMethod() { var User_Name = document.getElementById('<%=txtUserName.ClientID %>').value; WebService.CheckDuplicate(User_Name, OnSucceeded, OnError); } // This is the callback function invoked if the Web service // succeeded function OnSucceeded(result) { var rsltElement = document.getElementById("lblDuplicate"); if (result == 1) rsltElement.innerHTML = "This User Name is exist"; else rsltElement.innerHTML = ""; } function OnError(error) { // Display the error. alert("Service Error: " + error.get_message()); } </script> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This call references the WebService Class and CheckDuplicate Web Method defined in the service. It passes a User_Name value obtained from a textbox as well as a callback function named OnSucceeded that should be invoked when the asynchronous Web Service call returns. If the Web Service in different Namespace you can refer it before the class name this Main formula may help you : NameSpaceName.ClassName.WebMethdName(Parameters , Success callback function, Error callback function); Parameters: you can pass one or many parameters. Success callback function :handles returned data from the service . Error callback function :Any errors that occur when the Web Service is called will trigger in this function. Using Error Callback function is optional. Hope these steps help you to understand this approach.

Read the article

Upgrade Your Existing BI Publisher 11g (11.1.1.3) to 11.1.1.5

- by Kan Nishida

It’s already more than a month now since BI Publisher 11.1.1.5 was released at beginning of May. Have you already tried out many of the great new features? If you are already running on the first version of BI Publisher 11g (11.1.1.3) you might wonder how to upgrade the existing BI Publisher to the 11.1.1.5 version. There are two ways to do this, one is ‘Out-Place’ and another is ‘In-Place’. The ‘Out-Place’ would be quite simple. Basically you will need to install the whole BI or just BI Publisher standalone R11.1.1.5 at a different location then you can switch the catalog to the existing one so that all the reports will be there in the new 11.1.1.5 environment. But sometimes things are not that simple, you might have some custom applications or configuration on the original environment and you want to keep all of them with the upgraded environment. For such scenarios, there is the ‘In-Place’ upgrade, which overrides on top of the original environment only the parts relevant for BI and BI Publisher, and that’s what I’m going to talk about today. Here is the basic steps of the ‘In-Place’ upgrade. Upgrade WebLogic Server to 10.3.5 Upgrade BI System to 11.1.1.5 Upgrade Database Schema Re-register BI Components Upgrade FMW (Fusion Middleware) Configuration Upgrade BI Catalog There is a section that talks about this upgrade from 11.1.1.3 to 11.1.1.5 as part of the overall upgrade document. But I hope my blog post summarized it and made it simple for you to cover only what’s necessary. Upgrade Document: http://download.oracle.com/docs/cd/E21764_01/bi.1111/e16452/bi_plan.htm#BABECJJH Before You Start Stop BI System and Backup I can’t emphasize enough, but before you start PLEASE make sure you take a backup of the existing environments first. You want to stop all WebLogic Servers, Node Manager, OPMN, and OPMN-managed system components that are part of your Oracle BI domains. If you’re on Windows you can do this by simply selecting ‘Stop BI Services’ menu. Then backup the whole system. Upgrade WebLogic Server to 10.3.5 Download WebLogic Server 10.3.5 Upgrade Installer With BI 11.1.1.3 installation your WebLogic Server (WLS) is 10.3.3 and you need to upgrade this to 10.3.5 before upgrading the BI part. In order to upgrade you will need this 10.3.5 upgrade version of WLS, which you can download from our support web site (https://support.oracle.com) You can find the detail information about the installation and the patch numbers for the WLS upgrade installer on this document. Just for your short cut, if you are running on Windows or Linux (x86) here is the patch number for your platform. Windows 32 bit: 12395517: Linux: 12395517 Upgrade WebLogic Server 1. After unzip the downloaded file, launch wls1035_upgrade_win32.exe if you’re on Windows. 2. Accept all the default values and keep ‘Next’ till end, and start the upgrade. Once the upgrade process completes you’ll see the following window. Now let’s move to the BI upgrade. Upgrade BI Platform to 11.1.1.5 with Software Only Install Download BI 11.1.1.5 You can download the 11.1.1.5 version from our OTN page for your evaluation or development. For the production use it’s recommended to download from eDelivery. 1. Launch the installer by double click ‘setup.exe’ (for Windows) 2. Select ‘Software Only Install’ option 3. Select your original Oracle Home where you installed BI 11.1.1.3. 4. Click ‘Install’ button to start the installation. And now the software part of the BI has been upgraded to 11.1.1.5. Now let’s move to the database schema upgrade. Upgrade Database Schema with Patch Assistant You need to upgrade the BIPLATFORM and MDS Schemas. You can use the Patch Assistant utility to do this, and here is an example assuming you’ve created the schema with ‘DEV’ prefix, otherwise change it with yours accordingly. Upgrade BIPLATFORM schema (if you created this schema with DEV_ prev) psa.bat -dbConnectString localhost:1521:orcl -dbaUserName sys -schemaUserName DEV_BIPLATFORM Upgrade MDS schema (if you created this schema with DEV_ prev) psa.bat -dbConnectString localhost:1521:orcl -dbaUserName sys -schemaUserName DEV_MDS Re-register BI System components Now you need to re-register your BI system components such as BI Server, BI Presentation Server, etc to the Fusion Middleware system. You can do this by running ‘upgradenonj2eeapp.bat (or .sh)’ command, which can be found at %ORACLE_HOME%/opmn/bin. Before you run, you need to start the WLS Server and make sure your WLS environment is not locked. If it’s locked then you need to release the system from the Fusion Middleware console before you run the following command. Here is the syntax for the ‘upgradenonj2eeapp.bat (or .sh) command. upgradenonj2eeapp.bat -oracleInstance Instance_Home_Location -adminHost WebLogic_Server_Host_Name -adminPort administration_server_port_number -adminUsername administration_server_user And here is an example: cd %BI_HOME%\opmn\bin upgradenonj2eeapp.bat -oracleInstance C:\biee11\instances\instance1 -adminHost localhost -adminPort 7001 -adminUsername weblogic Upgrade Fusion Middleware Configuration There are a couple things on the Fusion Middleware need to be upgraded for the BI system to work. Here is a list of the components to upgrade. Upgrade Shared Library (JRF) Upgrade Fusion Middleware Security (OPSS) Upgrade Code Grants Upgrade OWSM Policy Repository Before moving forward, you need to stop the WebLogic Server. Here is an example. cd %MW_HOME%user_projects\domains\bifoundation_domain\binstopWebLogic.cmd And, let’s start with ‘Upgrade Shared Library (JRF)’. Upgrade Shared Library (JRF) You can use updateJRF() WLST command to upgrade the shared libraries in your domain. Before you do this, you need to stop all running instances, Managed Servers, Administration Server, and Node Manager in the domain. Here is an example of the ‘upgradeJRF()’ command: cd %MW_HOME%\oracle_common\common\bin wlst.cmd upgradeJRF('C:/biee11/user_projects/domains/bifoundation_domain') Upgrade Fusion Middleware Security (OPSS) This step is to upgrade the Fusion Middleware security piece. You can use ‘upgradeOpss()’ WLST command. Here is a syntax for the command. upgradeOpss(jpsConfig="existing_jps_config_file", jaznData="system_jazn_data_file") The ‘existing jps-config.xml file can be found under %DOMAIN_HOME%/config/fmwconfig/jps-config.xml and the ‘system_jazn_data_file’ can be found under %MW_HOME%/oracle_common/modules/oracle.jps_11.1.1/domain_config/system-jazn-data.xml. And here is an example: cd %MW_HOME%\oracle_common\common\bin wlst.cmd upgradeOpss(jpsConfig="c:/biee11/user_projects/domains/bifoundation_domain/config/fmwconfig/jps-config.xml", jaznData="c:/biee11/oracle_common/modules/oracle.jps_11.1.1/domain_config/system-jazn-data.xml") exit() Upgrade Code Grants for Oracle BI Domain And this is the last step for the Fusion Middleware platform upgrade task. You need to run this python script ‘bi-upgrade.py‘ script to configure the code grants necessary to ensure that SSL works correctly for Oracle BI. However, even if you don’t use SSL, you still need to run this script. And if you have multiple BI domains (Enterprise deployment) then you need to run this on each domain. Here is an example: cd %MW_HOME%\oracle_common\common\bin wlst c:\biee11\Oracle_BI1\bin\bi-upgrade.py --bioraclehome c:\biee11\Oracle_BI1 --domainhome c:\biee11\user_projects\domains\bifoundation_domain Upgrade OWSM Policy Repository This is to upgrade OWSM (Oracle Web Service Manager) policy repository, you can use WLST command ‘upgradeWSMPolicyRepository()’. In order to run this command you need to have your WebLogic Server up-and-running. Here is an example. cd %MW_HOME%user_projects\domains\bifoundation_domain\binstopWebLogic.cmd cd %MW_HOME%\oracle_common\common\bin wlst.cmd connect ('weblogic','welcome1','t3://localhost:7001') upgradeWSMPolicyRepository() exit() Upgrade BI Catalogs This step is required only when you have your BI Publisher integrated with BIEE. If your BI Publisher is deployed as a standalone then you don’t need to follow this step. Now finally, you can upgrade the BI catalog. This won’t upgrade your BI Publisher reports themselves, but it just upgrades some attributes information inside the catalog. Before you do this upgrade, make sure the BI system components are not running. You can check the status by the command below. opmnctl status You can do the upgrade by updating a configuration file ‘instanceconfig.xml’, which can be found at %BI_HOME%\instances\instance1\config\coreapplication_obips1, and change the value of ‘UpgradeAndExit’ to be ‘true’. Here is an example: <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1"> <ps:UpgradeAndExit>true</ps:UpgradeAndExit> </ps:Catalog> After you made the change and save the file, you need to start the BI Presentation Server. This time you want to start only the BI Presentation Server instead of starting all the servers. You can use ‘opmnctl’ to do so, and here is an example. cd %ORACLE_INSTANCE%\bin opmnctl startproc ias-component=coreapplication_obips1 This would upgrade your BI Catalog to be 11.1.1.5. After the catalog is updated, you can stop the BI Presentation Server so that you can modify the instanceconfig.xml file again to revert the upgradeAndExit value back to ‘false’. Start Explore BI Publisher 11.1.1.5 After all the above steps, you can start all the BI Services, access to the same URL, now you have your BI Publisher and/or BI 11.1.1.5 in your hands. Have fun exploring all the new features of R11.1.1.5!

Read the article

CodePlex Daily Summary for Sunday, March 14, 2010

CodePlex Daily Summary for Sunday, March 14, 2010New ProjectsBeerMath.net: BeerMath.net lets brewers calculate expected values for their recipes. Written entirely in C#, it can be used in any .Net language.Bible Study: Данный проект предусматривает создание программного обеспечения, предоставляющего пользователю гибкие и мощные инструменты для чтения и изучения Пи...E-Messenger: Description détaillé du sujet : Développement d'une application (client lourd) de messagerie instantané et de partage de fichier interne à ESPRIT....Facebook Azure Toolkit: The Facebook Azure Toolit provides a flexible and scalable hosting platform for the smallest and largest of Facebook applications. This toolkit hel...Gherkin editor: A simple text editor to write specifications using Gherkin. The editor supports code completion, syntax highlighting, spell checker and more.Mydra Center: Mydra Center is a Media center with the particularity to be very flexible, allowing developers to extend it and add new features. The philosophy be...MyTwits - A rich Twitter client for Windows powered by WPF: MyTwits is a free Twitter client for Windows XP/Vista/7 powered by WPF which gives you freedom to twit right from your desktop. You can do almost a...na laborke: aaaaaaaaaaaaaaasssssssssssssssddddddddddddddddddddfffffffffffffNMTools: The "Network Management Tools" (NMTools) complete OpenSLIM CMDB capabilities with Network Discovery, Automation and Configuration Managem...orionSRO: This project aims to make a fully functional server.Project Naduvar: Project Naduvar, is a centralized Locking Service in distribute systems. You can use this service in any of your existing distributed application. ...Silverlight Input Keyboard: Silverlight Input Keyboard and Behaviorsuh: uh.py is a command line tool that helps developers porting native projects from a case-insensitive filesystem to a case-sensitive filesystem by sea...New ReleasesAmiBroker Plug-ins with C#. A non official AmiBroker Plug-in SDK: AmiBroker Plug-in SDK v0.0.3: Small changesAmiBroker Plug-ins with C#. A non official AmiBroker Plug-in SDK: AmiBroker Plug-in SDK v0.0.4: Small updatesAStyle AddIn for SharpDevelop (Alex): 2.0 Production: #D 3.* add in with updated GUI elements.Coding Cockerel code samples: Validation with ASP .NET MVC and jQuery: Code sample related to the following blog post, http://codingcockerel.co.uk/consistent-validation-with-asp-net-mvc-and-jquery/.CoreSystem Library: Release - 1.0.3725.10575: This release contains a new class Crypto which makes encryption and descryption of string easy, it uses TripleDESCrystal Mapper: Release - 2.0.3725.11614: This is preview if release 2.0* that I promised, it contains following new features Tracking dirty entities and provide Save function to save all ...Digital Media Processing Project 1: Image Processor: Image Processor Alpha: First Release Features Include: Curve Adjustment Tool Region Growing Segmetation Threshold Segmentation Guassian/Butterworth High/Low pass filter...Exepack.NET: Exepack.NET version 0.03 beta: Exepack.NET is executable file compressor for .NET Framework. It allows to package your .NET application consisting of an executable file and sever...Export code as Code Snippet - Addin for Visual Studio 2008/2010 RC: VS 2010 Release Candidate: This release targets Visual Studio 2010 Release Candidate. It includes full Visual Basic 2010 source code. Fixes already available in previous ve...Facebook Azure Toolkit: 0.9 Beta: This is the initial beta releaseFamily Tree Analyzer: Version 1.0.5.0: Version 1.0.5.0 Change the way Census & Individual reports columns are sized so that user can resize later. Add filter to exclude individuals over...Home Access Plus+: v3.1.2.1: Version 3.1.2.1 Release Change Log: Added SSL SMTP Added SSL Authentication File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/we...Home Access Plus+: v3.1.3.1: Version 3.1.3.1 Release Change Log: Fixed Help Desk File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb ~/helpdesk/*.htmIceChat: IceChat 2009 Alpha 11.6 Full Install: IceChat 2009 Alpha 11.6 - Full Installer, installs IceChat 2009, and the Emoticons, and will also download .Net Framework 2.0 if needed.IceChat: IceChat 2009 Alpha 11.6 Simple Binaries: This simply the IceChat2009.exe and the IPluginIceChat.dll needed to run IceChat 2009. Is not an installer, does not include emoticons.IceChat: IceChat 2009 Alpha 11.6 Source Code: IceChat 2009 Alpha 11.6 Source CodeLunar Phase Silverlight Gadget: Lunar Phase RC: Stable release. 6 languages Auto refresh. Name / Light problem fixedMiracle OS: Miracle OS Alpha 0.001: Our first release is the Alpha 0.001. Miracle OS doens't work at all, but we work on it. You to? Please help us.MyTwits - A rich Twitter client for Windows powered by WPF: MyTwits BETA 1: I'm happy to release first BETA version of MyTwits. Just download the zip file attached and run setup.exe and you are done! If you've any problem...MyTwits - A rich Twitter client for Windows powered by WPF: MyTwits Source BETA 1: I'm providing you just a project file, I'll upload complete source code once I fine tuned the code.NMock3: NMock3 - Beta 5, .NET 3.5: Hilights of this releaseTutorials have been updated and are in a much better place now. (they compile) Public API is getting locked down. Void me...Project Naduvar: com.declum.naduvar.locking: First ReleaseQueryToGrid Module for DotNetNuke®: QueryToGrid Module version 01.00.01: This module is a proof of concept for both using AJAX in a DotNetNuke® module, and for using SQL in a module. »»» IMPORTANT NOTE ««« Using this mo...SCSI Interface for Multimedia and Block Devices: Release 10 - Almost like a commercial burner!!: I made many changes in the ISOBurn program in this version, making it much more user-friendly than before. You can now add, rename, and delete file...Silverlight Input Keyboard: Initial Release: For more information see http://www.orktane.com/Blog/post/2009/11/09/Virtual-Input-Keyboard-Behaviours-for-Silverlight.aspxThe Silverlight Hyper Video Player [http://slhvp.com]: RC: The release candidate is now in place. Unfortunately, because there are aspects of it that I'm not yet ready to discuss, the code for the RC will...twNowplaying: twNowplaying 1.0.0.3: Press the Twitter icon to get started, don't forget to submit bugs to the issue tracker. What's new This release has some minor UI fixes.uh: 1.0: This is the first stable release. It isn't super full featured but it does the basics.UriTree: UriTree 2.0.0: This release is the WPF version of this application.VCC: Latest build, v2.1.30313.0: Automatic drop of latest buildVr30 OS: Blackra1n: The software was made by blackra1n for jailbreak iphone and ipod touch. Is not the Vr30 OS Team ProjectVr30 OS: Vr30 Operating System Live Cd 1.0: The Operating system linux made by team. For more information go to http://vr30os.tuxfamily.orgWatchersNET.TagCloud: WatchersNET.TagCloud 01.01.00: Whats New Decide between Tags generated from the Search words, or create your own Tag List Custom Tag list changes Small BugfixesZeta Resource Editor: Source code release 2010-03-13: New sources, some small fixes.ZipStorer - A Pure C# Class to Store Files in Zip: ZipStorer 2.35: Improved UTF-8 Support Correct writting of modification time for extracted filesMost Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NET Ajax LibraryASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrN2 CMSBlogEngine.NETpatterns & practices – Enterprise LibrarySharePoint Team-MailerFasterflect - A Fast and Simple Reflection APICaliburn: An Application Framework for WPF and SilverlightjQuery Library for SharePoint Web ServicesCalcium: A modular application toolset leveraging PrismFarseer Physics Engine

Read the article

Dependency Injection in ASP.NET MVC NerdDinner App using Unity 2.0

- by shiju

In my previous post Dependency Injection in ASP.NET MVC NerdDinner App using Ninject, we did dependency injection in NerdDinner application using Ninject. In this post, I demonstrate how to apply Dependency Injection in ASP.NET MVC NerdDinner App using Microsoft Unity Application Block (Unity) v 2.0.Unity 2.0Unity 2.0 is available on Codeplex at http://unity.codeplex.com . In earlier versions of Unity, the ObjectBuilder generic dependency injection mechanism, was distributed as a separate assembly, is now integrated with Unity core assembly. So you no longer need to reference the ObjectBuilder assembly in your applications. Two additional Built-In Lifetime Managers - HierarchicalifetimeManager and PerResolveLifetimeManager have been added to Unity 2.0.Dependency Injection in NerdDinner using UnityIn my Ninject post on NerdDinner, we have discussed the interfaces and concrete types of NerdDinner application and how to inject dependencies controller constructors. The following steps will configure Unity 2.0 to apply controller injection in NerdDinner application. Step 1 – Add reference for Unity Application BlockOpen the NerdDinner solution and add reference to Microsoft.Practices.Unity.dll and Microsoft.Practices.Unity.Configuration.dllYou can download Unity from at http://unity.codeplex.com .Step 2 – Controller Factory for Unity The controller factory is responsible for creating controller instances.We extend the built in default controller factory with our own factory for working Unity with ASP.NET MVC. public class UnityControllerFactory : DefaultControllerFactory { protected override IController GetControllerInstance(RequestContext reqContext, Type controllerType) { IController controller; if (controllerType == null) throw new HttpException( 404, String.Format( "The controller for path '{0}' could not be found" + "or it does not implement IController.", reqContext.HttpContext.Request.Path)); if (!typeof(IController).IsAssignableFrom(controllerType)) throw new ArgumentException( string.Format( "Type requested is not a controller: {0}", controllerType.Name), "controllerType"); try { controller = MvcUnityContainer.Container.Resolve(controllerType) as IController; } catch (Exception ex) { throw new InvalidOperationException(String.Format( "Error resolving controller {0}", controllerType.Name), ex); } return controller; } } public static class MvcUnityContainer { public static IUnityContainer Container { get; set; } } Step 3 – Register Types and Set Controller Factory private void ConfigureUnity() { //Create UnityContainer IUnityContainer container = new UnityContainer() .RegisterType<IFormsAuthentication, FormsAuthenticationService>() .RegisterType<IMembershipService, AccountMembershipService>() .RegisterInstance<MembershipProvider>(Membership.Provider) .RegisterType<IDinnerRepository, DinnerRepository>(); //Set container for Controller Factory MvcUnityContainer.Container = container; //Set Controller Factory as UnityControllerFactory ControllerBuilder.Current.SetControllerFactory( typeof(UnityControllerFactory)); } Unity 2.0 provides a fluent interface for type configuration. Now you can call all the methods in a single statement.The above Unity configuration specified in the ConfigureUnity method tells that, to inject instance of DinnerRepositiry when there is a request for IDinnerRepositiry and inject instance of FormsAuthenticationService when there is a request for IFormsAuthentication and inject instance of AccountMembershipService when there is a request for IMembershipService. The AccountMembershipService class has a dependency with ASP.NET Membership provider. So we configure that inject the instance of Membership Provider.After the registering the types, we set UnityControllerFactory as the current controller factory. //Set container for Controller Factory MvcUnityContainer.Container = container; //Set Controller Factory as UnityControllerFactory ControllerBuilder.Current.SetControllerFactory( typeof(UnityControllerFactory)); When you register a type by using the RegisterType method, the default behavior is for the container to use a transient lifetime manager. It creates a new instance of the registered, mapped, or requested type each time you call the Resolve or ResolveAll method or when the dependency mechanism injects instances into other classes. The following are the LifetimeManagers provided by Unity 2.0ContainerControlledLifetimeManager - Implements a singleton behavior for objects. The object is disposed of when you dispose of the container.ExternallyControlledLifetimeManager - Implements a singleton behavior but the container doesn't hold a reference to object which will be disposed of when out of scope.HierarchicalifetimeManager - Implements a singleton behavior for objects. However, child containers don't share instances with parents.PerResolveLifetimeManager - Implements a behavior similar to the transient lifetime manager except that instances are reused across build-ups of the object graph.PerThreadLifetimeManager - Implements a singleton behavior for objects but limited to the current thread.TransientLifetimeManager - Returns a new instance of the requested type for each call. (default behavior)We can also create custome lifetime manager for Unity container. The following code creating a custom lifetime manager to store container in the current HttpContext. public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable { public override object GetValue() { return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName]; } public override void RemoveValue() { HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName); } public override void SetValue(object newValue) { HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue; } public void Dispose() { RemoveValue(); } } Step 4 – Modify Global.asax.cs for configure Unity container In the Application_Start event, we call the ConfigureUnity method for configuring the Unity container and set controller factory as UnityControllerFactory void Application_Start() { RegisterRoutes(RouteTable.Routes); ViewEngines.Engines.Clear(); ViewEngines.Engines.Add(new MobileCapableWebFormViewEngine()); ConfigureUnity(); }Download CodeYou can download the modified NerdDinner code from http://nerddinneraddons.codeplex.com

Read the article

When should I use Areas in TFS instead of Team Projects

- by Martin Hinshelwood

Well, it depends…. If you are a small company that creates a finite number of internal projects then you will find it easier to create a single project for each of your products and have TFS do the heavy lifting with reporting, SharePoint sites and Version Control. But what if you are not… Update 9th March 2010 Michael Fourie gave me some feedback which I have integrated. Ed Blankenship via @edblankenship offered encouragement and a nice quote. Ewald Hofman gave me a couple of Cons, and maybe a few more soon. Ewald’s company, Avanade, currently uses Areas, but it looks like the manual management is getting too much and the project is getting cluttered. What if you are likely to have hundreds of projects, possibly with a multitude of internal and external projects? You might have 1 project for a customer or 10. This is the situation that most consultancies find themselves in and thus they need a more sustainable and maintainable option. What I am advocating is that we should have 1 “Team Project” per customer, and use areas to create “sub projects” within that single “Team Project”. "What you describe is what we generally do internally and what we recommend. We make very heavy use of area path to categorize the work within a larger project." - Brian Harry, Microsoft Technical Fellow & Product Unit Manager for Team Foundation Server "We tend to use areas to segregate multiple projects in the same team project and it works well." - Tiago Pascoal, Visual Studio ALM MVP "In general, I believe this approach provides consistency [to multi-product engagements] and lowers the administration and maintenance costs. All good." - Michael Fourie, Visual Studio ALM MVP “@MrHinsh BTW, I'm very much a fan of very large, if not huge, team projects in TFS. Just FYI :) Use Areas & Iterations.” Ed Blankenship, Visual Studio ALM MVP This would mean that SSW would have a single Team Project called “SSW” that contains all of our internal projects and consequently all of the Areas and Iteration move down one hierarchy to accommodate this. Where we would have had “\SSW\Sprint 1” we now have “\SSW\SqlDeploy\Sprint1” with “SqlDeploy” being our internal project. At the moment SSW has over 70 internal projects and more than 170 total projects in TFS. This method has long term benefits that help to simplify the support model for companies that often have limited internal support time and many projects. But, there are implications as TFS does not provide this model “out-of-the-box”. These implications stretch across Areas, Iterations, Queries, Project Portal and Version Control. Michael made a good comment, he said: I agree with your approach, assuming that in a multi-product engagement with a client, they are happy to adopt the same process template across all products. If they are not, then it’ll either be easy to convince them or there is a valid reason for having a different template - Michael Fourie, Visual Studio ALM MVP At SSW we have a standard template that we use and this is applied across the board, to all of our projects. We even apply any changes to the core process template to all of our existing projects as well. If you have multiple projects for the same clients on multiple templates and you want to keep it that way, then this approach will not work for you. However, if you want to standardise as we have at SSW then this approach may benefit you as well. Implications around Areas Areas should be used for topological classification/isolation of work items. You can think of this as architecture areas, organisational areas or even the main features of your application. In our scenario there is an additional top level item that represents the Project / Product that we want to chop our Team Project into. Figure: Creating a sub area to represent a product/project is easy. <teamproject> <teamproject>\<Functional Area/module whatever> Becomes: <teamproject> <teamproject>\<ProjectName>\ <teamproject>\<ProjectName>\<Functional Area/module whatever> Implications around Iterations Iterations should be used for chronological classification/isolation of work items. This could include isolated time boxes, milestones or release timelines and really depends on the logical flow of your project or projects. Due to the new level in Area we need to add the same level to Iteration. This is primarily because it is unlikely that the sprints in each of your projects/products will start and end at the same time. This is just a reality of managing multiple projects. Figure: Adding the same Area value to Iteration as the top level item adds flexibility to Iteration. <teamproject>\Sprint 1 Or <teamproject>\Release 1\Sprint 1 Becomes: <teamproject>\<ProjectName>\Sprint 1 Or <teamproject>\<ProjectName>\Release 1\Sprint 1 Implications around Queries Queries are used to filter your work items based on a specified level of granularity. There are a number of queries that are built into a project created using the MSF Agile 5.0 template, but we now have multiple projects and it would be a pain to have to edit all of the work items every time we changed project, and that would only allow one team to work on one project at a time. Figure: The Queries that are created in a normal MSF Agile 5.0 project do not quite suit our new needs. In order for project contributors to be able to query based on their project we need a couple of things. The first thing I did was to create an “_Area Template” folder that has a copy of the project layout with all the queries setup to filter based on the “_Area Template” Area and the “_Sprint template” you can see in the Area and Iteration views. Figure: The template is currently easily drag and drop, but you then need to edit the queries to point at the right Area and Iteration. This needs a tool. I then created an “Areas” folder to hold all of the area specific queries. So, when you go to create a new TFS Sub-Project you just drag “_Area Template” while holding “Ctrl” and drop it onto “Areas”. There is a little setup here. That said I managed it in around 10 minutes which is not so bad, and I can imagine it being quite easy to build a tool to create these queries Figure: These new queries can be configured in around 10 minutes, which includes setting up the Area and Iteration as well. Version Control What about your source code? Well, that is the easiest of the lot. Just create a sub folder for each of your projects/products. Figure: Creating sub folders in source control is easy as “Right click | Create new folder”. <teamproject>\DEV\Main\ Becomes: <teamproject>\<ProjectName>\DEV\Main\ Conclusion I think it is up to each company to make a call on how you want to configure your Team Projects and it depends completely on how many projects/products you are going to have for each customer including yourself. If we decide to utilise this route it will require some configuration to get our 170+ projects into this format, and I will probably be writing some tools to help. Pros You only have one project to upgrade when a process template changes – After going through an upgrade of over 170 project prior to the changes in the RC I can tell you that that many projects is no fun. Standardises your Process Template – You will always have the same Process implementation across projects/products without exception You get tighter control over the permissions – Yes, you can do this on a standard Team Project, but it gets a lot easier with practice. You can “move” work items from one “product” to another – Have we not always wanted to do that. You can rename your projects – Wahoo: everyone wants to do this, now you can. One set of Reporting Services reports to manage – You set an area and iteration to run reports anyway, so you may as well set both. Simplified Check-In Policies– There is only one set of check-in policies per client. This simplifies administration of policies. Simplified Alerts – As alerts are applied across multiple projects this simplifies your alert rules as per client. Cons All of these cons could be mitigated by a custom tool that helps automate creation of “Sub-projects” within Team Projects. This custom tool could create areas, Iteration, permissions, SharePoint and queries. It just does not exist yet :) You need to configure the Areas and Iterations You need to configure the permissions You may need to configure sub sites for SharePoint (depends on your requirement) – If you have two projects/products in the same Team Project then you will not see the burn down for each one out-of-the-box, but rather a cumulative for the Team Project. This is not really that much of a problem as you would have to configure your burndown graphs for your current iteration anyway. note: When you create a sub site to a TFS linked portal it will inherit the settings of its parent site :) This is fantastic as it means that you can easily create sub sites and then set the Area and Iteration path in each of the reports to be the correct one. Every team wants their own customization (via Ewald Hofman) - small teams of 2 persons against teams of 30 – or even outsourcing – need their own process, you cannot allow that because everybody gets the same work item types. note: Luckily at SSW this is not a problem as our template is standardised across all projects and customers. Large list of builds (via Ewald Hofman) – As the build list in Team Explorer is just a flat list it can get very cluttered. note: I would mitigate this by removing any build that has not been run in over 30 days. The build template and workflow will still be available in version control, but it will clean the list. Feedback Now that I have explained this method, what do you think? What other pros and cons can you see? What do you think of this approach? Will you be using it? What tools would you like to support you? Technorati Tags: Visual Studio ALM,TFS Administration,TFS,Team Foundation Server,Project Planning,TFS Customisation

Search Results

Search found 8766 results on 351 pages for 'integrated authentication'.

Page 336/351 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343 | Next Page >

- by Jaanus

- by karmasponge

- by salvationishere

- by AlexDPC

- by Andersmith

- by neezer

- by jlego

- by bua

- by Steve

- by randallmeadows

- by Preben Huybrechts

- by Amarus

- by Dooree

- by Daniel

- by user1547432

- by BillPull

- by Jakobud

- by Martin Hinshelwood

- by Yousef_Jadallah

- by Yousef_Jadallah

- by Kan Nishida

- by shiju

- by Martin Hinshelwood

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343 | Next Page >