Search Results

Search found 34495 results on 1380 pages for 'network and internet'.

Page 336/1380 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• debootstrap or virt-install Ubuntu Server Maverick fails

  - by poelinca

  Oki so running any kind of variation of debootsrap i get the following error I: Extracting zlib1g... W: Failure trying to run: chroot /lxc/iso/dodo mount -t proc proc /proc debootstrap.log : mount: permission denied if i manualy chroot into the directory then i get promted with: id: cannot find name for group ID 0 I have no name!@...# i tryed addgroup but it's not installed , apt-get/aptitude : command not found , so i can't do anything with it . I've tryed ubuntu-vm-builder but since it's calling debootstrap i get the same error . Played with it for a few days and then i stoped and gaved virt-install a try , everithing works till i get to the console to finish the install witch shows only : Escape character is ^] and nothing more , no matter what i type . So basicly what i'm trying to do is build a usable chroot system so i can use it with lxc or libvirt . What are my options to get containers/virtualisation up and running ? I've read somewhere that i can use openvz templates with lxc or libvirt ? but how ? Let me know if you need aditional info ( p.s. doing all this on a dedicated server so i can't access it by hand , only ssh , plus on my local pc running ubuntu desktop maverick everithing works ) . EDIT Getting closer , i managed to understand how to use an openvz template with lxc , now the problem comes with the network bridge lxc-start: invalid interface name: br0 # Use same bridge device used in your controlling host setup lxc-start: failed to process 'lxc.network.link = br0 # Use same bridge device used in your controlling host setup ' lxc-start: failed to read configuration file i followed the exact steps to create a bridge and lxc conf looks like: lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 # Use same bridge device used in your controlling host setup lxc.network.hwaddr = {a1:b2:c3:d4:e5:f6} # As appropiate (line only needed if you wish to dhcp later) lxc.network.ipv4 = {10.0.0.100} # (Use 0.0.0.0 if you wish to dhcp later) lxc.network.name = eth0 # could likely be whatever you want Since it's not working i know smth is wrong so could somebody guyde me ? EDIT , looks like the base install was using an custom kernel ( bzImage-2.6.34.6-xxxx-grs-ipv6-65 ) for witch you i didn't found the headers , i did a update-grub after i installed a new kernel , edited menu.lst and no it's using 2.6.35-23-server and now debootstrap is working just fine same as ubuntu-vm-builder .

  Read the article

• wifi connection in lubuntu 11.10

  - by made_in_india

  I am facing the wifi network connection problem, which was previously working absolutely fine. I have checked /etc/network/interfaces file auto wlan0 iface wlan0 inet dhcp wireless-mode managed wireless-essid my_network_name I have also tried the following command on terminal but were no use sudo ifup wlan0 fail to bring up wlan0 sudo ifdown wlan0 ifdown: interface wlan0 not configured output of $ sudo lspci |grep -i network has produce the below results 06:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• SCVMM – Round 2 – How to create a Private Cloud using PowerShell

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2013/06/28/scvmm--round-2--how-to-create-a-private.aspxHave you ever seen "A Bridge too far" movie? To not to wake up a click too far, it is good to script some tasks. Yes of course we can follow wizards, but some of us want to be warriorsJ. A small tip, take a look on credentials and system GUID examples. I don't know how about you, but for me it will be really useful in the future.    # credents$credential = Get-CredentialNew-SCRunAsAccount -Name "TESTDOMAIN\Administrator" -Credential $credential #storage $opsMgrServerCredential = Get-SCRunAsAccount -Name "TESTDOMAIN\Administrator"New-SCStorageClassification -Name "Bronze" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Silver" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Gold" -Description "" –RunAsynchronously # add a shared storageFind-SCComputer -ComputerName "dc.TESTDOMAIN.net"Add-SCStorageProvider -AddWindowsNativeWmiProvider -Name "dc.TESTDOMAIN.net" -RunAsAccount $opsMgrServerCredential -ComputerName "dc.TESTDOMAIN.net"$fileServer = Get-SCStorageFileServer "dc.TESTDOMAIN.net"$fileShares = @()$fileShares += Get-SCStorageFileShare -Name "VMMLibrary"Set-SCStorageFileServer -StorageFileServer $fileServer -AddStorageFileShareToManagement $fileShares –RunAsynchronously #fabric network$logicalNetwork = New-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinitionIsolation $false -EnableNetworkVirtualization $true -UseGRE $true -IsPVLAN $false$allHostGroups = @()$allHostGroups += Get-SCVMHostGroup -Name "All Hosts"$allSubnetVlan = @()$allSubnetVlan += New-SCSubnetVLan -Subnet "10.0.0.0/24" -VLanID 0New-SCLogicalNetworkDefinition -Name "TESTDOMAIN-Service-Network_0" -LogicalNetwork $logicalNetwork -VMHostGroup $allHostGroups -SubnetVLan $allSubnetVlan #IP pool$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$logicalNetworkDefinition = Get-SCLogicalNetworkDefinition -LogicalNetwork $logicalNetwork -Name "TESTDOMAIN-Service-Network_0" # Gateways$allGateways = @()$allGateways += New-SCDefaultGateway -IPAddress "10.0.0.1" –Automatic# DNS servers $allDnsServer = @("10.0.0.1")# DNS suffixes$allDnsSuffixes = @("TESTDOMAIN.net")# WINS servers$allWinsServers = @()New-SCStaticIPAddressPool -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinition $logicalNetworkDefinition -Subnet "10.0.0.0/24" -IPAddressRangeStart "10.0.0.51" -IPAddressRangeEnd "10.0.0.75" -DefaultGateway $allGateways -DNSServer $allDnsServer -DNSSuffix "" -DNSSearchSuffix $allDnsSuffixes –RunAsynchronously #Hyper-V Virtual Networks$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" $vmNetwork = New-SCVMNetwork -Name "TESTDOMAIN-VMN" -LogicalNetwork $logicalNetwork -IsolationType "WindowsNetworkVirtualization" -CAIPAddressPoolType "IPV4" -PAIPAddressPoolType "IPV4"Write-Output $vmNetwork$subnet = New-SCSubnetVLan -Subnet "10.0.0.0/24"New-SCVMSubnet -Name "Con-SN" -VMNetwork $vmNetwork -SubnetVLan $subnet # bind VLAN with the Network Adapter$vmHost = Get-SCVMHost -ComputerName "VMM01.TESTDOMAIN.net"$vmHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $vmHost #-Name "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)"Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -Description "" -AvailableForPlacement $true -UsedForManagement $true $logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -AddOrSetLogicalNetwork $logicalNetworkSet-SCVMHost -VMHost $vmHost -RunAsynchronously -NumaSpanningEnabled $true #Create a Private Cloud$Guid = [System.Guid]::NewGuid()Set-SCCloudCapacity -JobGroup $Guid -UseCustomQuotaCountMaximum $false -UseMemoryMBMaximum $false -UseCPUCountMaximum $false -UseStorageGBMaximum $false -UseVMCountMaximum $false -CustomQuotaCount 10 -MemoryMB 10240 -CPUCount 10 -StorageGB 386 -VMCount 10$resources = @()$resources += Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$resources += Get-SCLoadBalancer -Manufacturer "Microsoft"$readonlyLibraryShares = @()$readonlyLibraryShares += Get-SCLibraryShare | where { $_.LibraryServer.Name -eq "dc.TESTDOMAIN.net" -and $_.Name -eq "VMMLibrary" }$addCapabilityProfiles = @()$addCapabilityProfiles += Get-SCCapabilityProfile -Name "Hyper-V"$Guid2 = [System.Guid]::NewGuid()Set-SCCloud -JobGroup $Guid2 -RunAsynchronously -AddCloudResource $resources -AddReadOnlyLibraryShare $readonlyLibraryShares -AddCapabilityProfile $addCapabilityProfiles$hostGroups = @()$hostGroups += Get-SCVMHostGroup -Name "TESTDOMAIN"New-SCCloud -VMHostGroup $hostGroups -Name "TESTDOMAIN-Cloud" -Description "" –RunAsynchronously

  Read the article

• Packard Bell TK11 Wifi not working (Ubuntu 12.10)

  - by Ingmar

  Hardware: Packard Bell EasyNote TK11BZ, BIOS version 1.15 Broadcom BCM43227 802.11 b/n/g Problem: Everything works as it should, except the wireless connection. The Wifi device is enabled in the "Additional Drivers" section of Software Sources, but does not even show up in the network manager drop-down. sudo lshw -C network: *-network UNCLAIMED description: Network controller product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0100000-f0103fff

  Read the article

• How to connect to a serverside process on Ubuntu running in a VM?

  - by Jenko

  I am running Ubuntu 11.10 in VirtualBox, on Windows 7. I'm trying to setup a serverside process like Apache on it. How do I configure VirtualBox to allow access to the Ubuntu server process from other computers on the network? I can access the internet from Ubuntu. The Windows 7 computer is on a WiFi network using DHCP. The WiFi network has a dynamic IP with the network provider. This is my current configuration:

  Read the article

• Videos You Can Find On YouTube

  Each day, a large number of internet users visit an online video website. In fact, many internet users visit more than one. Online video websites are websites that allow internet users to make, uploa... [Author: Julie Williams - Computers and Internet - April 11, 2010]

  Read the article

• Social-network, online community, company and job reviews, salaries statistics and much more.. Do we have it? Do we need it?

  - by Vlad Lazarenko

  I have many friends from Ukraine who are programmers. So I found out that they have a web site that collects, organizes and analyzing information about IT companies, which includes location, feedbacks, company reviews from current and former employees etc. They also collect programming salaries and organize them by language, region etc. That web site is ran by programmers and for programmers, all information is absolutely public and free. Plus, web site has forums, and people can discuss (more or less social than specific programming stuff) things, publish articles, news etc. I personally think that is useful, especially for those who are new in this industry. For example, you may do a small research and find out that, for example, Java programmers getting paid more than PHP programmers but demand is lower. Or you get an offer from the company, is about to accept it, but read reviews and find out that they don't even provide internet access at work and if you need to download something, you have to ask your manager to do it for you, and managers share a single computer that has internet connection to get that stuff for you (there is only one such company in Kiev, Ukraine, called SMK, for Software Mac Kiev, a big shame). So the question is - do we have something like it in US? Or at least, say, for New York region? Or state? All information I managed to find online is inaccurate or not full. Forums are very specific. If we don't have it, would you be interested in creating such a portal? Thanks!

  Read the article

• Setting MTU on Exalogic

  - by csoto

  For many reasons, a system administrator may want to change the MTU settings of a server. But in a system like Exalogic which contains lots of interconnected nodes and other various components, it's important to understand how this applies to the different networks. For example, when bringing up bonding of InfiniBand an error like the following may be thrown: Bringing up interface bond1: SIOCSIFMTU: Invalid argument Both scripts ifcfg-ib0 and ifcfg-ib1 (from the /etc/sysconfig/network-scripts/ direectory) have MTU set to 65500, which is a valid MTU value only if all IPoIB slaves operate in connected mode and are configured with the same value, so the line below must be added to both network scripts and then restart the network: CONNECTED_MODE=yes By the way, an error of the form “SIOCSIFMTU: Invalid argument” indicates that the requested MTU was rejected by the kernel. Typically this would be due to it exceeding the maximum value supported by the interface hardware. In that case you must either reduce the MTU to a value that is supported or obtain more capable hardware. This problem has been seen when trying to modify the MTU using the ifconfig command, like the output of the example below: [root@elxxcnxx ~]# ifconfig ib1 mtu 65520 SIOCSIFMTU: Invalid argument It's important to insist that in most cases the nodes must be rebooted after the MTU size has been changed. Although in some circumstances it may work without a reboot, it is not how it is typically documented. Now, in order to achieve a reduced memory consumption and improve performance for network traffic received on IPoIB related interfaces, it is recommend to reduce the MTU value in interface configuration files for IPoIB related bonds from 65520 to 64000. The change needs to be made to interface configuration files under the /etc/sysconfig/network-scripts directory and applies to the interface configuration files for bonds over IPoIB related slave devices, for example /etc/sysconfig/network-scripts/ifcfg-bond1. However, keep in mind that the numeric portion of the interface filenames that corresponding to IPoIB interfaces is expected to vary across compute nodes and vServers and so cannot be relied upon to identify which interface files are for bonds are over IPoIB rather than EoIB related slave interfaces. To fix these MTU values to the recommended settings, there are very useful instructions and a script on the MOS Note 1624434.1, and it's applicable physical and virtual configurations of Exalogic. Regarding the recommended MTU value for EoIB related interfaces, its maximum appropriate value is 1500. If for some reason a vServer has been created with a higher value (set on the /etc/sysconfig/network-scripts/ifcfg-bond0 file), then it must be fixed. An error like the following could be thrown under this circumstance: [root@vServer ~]# service network restart ... Bringing up interface bond0:  SIOCSIFMTU: Invalid argument Also an error like the one below can be seen on the /var/log/messages file of the vServer: kernel: T5074835532 [mlx4_vnic] eth1:vnic_change_mtu:360: failed: new_mtu 64000 2026 The MOS Note 1611657.1 is very useful for this purpose.

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• Wireless connection by using command screen

  - by Amadeus

  I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

  Read the article

• Website Flipping and Developing Can Make Money Fast

  Trying to make money on the Internet is not that difficult a task. One must have at least a basic idea of web design and programming in general. If one is new to the Internet game and knows little learning is quite easy. The Internet can teach one everything there is to know about the Internet and how to work with it and design websites for it.

  Read the article

• Four Words That Go Together Well: Oracle. Technology. Network. Lounge.

  - by Oracle OpenWorld Blog Team

  Again this year the Oracle Technology Network (OTN) Lounge will be in the Howard Street Tent, on Howard Street (surprise!) between Moscone North and South. The OTN Lounge is a central meeting place for all Oracle OpenWorld and JavaOne attendees to network with Oracle experts, ACEs, and peers. And to discuss areas of common technology interest - or discuss anything at all. Check out this OTN blog post to get the details on exciting special activities, drawings, and contests happening at the lounge the week of the conference. Stop by - there could be a t-shirt in it for you. OTN Lounge Hours Sunday, September 30    7:00 p.m. - 8:30 p.m.Monday, October 1          8:00 a.m. - 7:00 p.m.Tuesday, October 2         8:00 a.m. - 7:00 p.m.Wednesday, October 3    8:00 a.m. - 5:00 p.m.Thursday, October 4        8:00 a.m. - 2:00 p.m.

  Read the article

• Linq-to-XML query to select specific sub-element based on additional criteria

  - by BrianLy

  My current LINQ query and example XML are below. What I'd like to do is select the primary email address from the email-addresses element into the User.Email property. The type element under the email-address element is set to primary when this is true. There may be more than one element under the email-addresses but only one will be marked primary. What is the simplest approach to take here? Current Linq Query (User.Email is currently empty): var users = from response in xdoc.Descendants("response") where response.Element("id") != null select new User { Id = (string)response.Element("id"), Name = (string)response.Element("full-name"), Email = (string)response.Element("email-addresses"), JobTitle = (string)response.Element("job-title"), NetworkId = (string)response.Element("network-id"), Type = (string)response.Element("type") }; Example XML: <?xml version="1.0" encoding="UTF-8"?> <response> <response> <contact> <phone-numbers/> <im> <provider></provider> <username></username> </im> <email-addresses> <email-address> <type>primary</type> <address>[email protected]</address> </email-address> </email-addresses> </contact> <job-title>Account Manager</job-title> <type>user</type> <expertise nil="true"></expertise> <summary nil="true"></summary> <kids-names nil="true"></kids-names> <location nil="true"></location> <guid nil="true"></guid> <timezone>Eastern Time (US &amp; Canada)</timezone> <network-name>Domain</network-name> <full-name>Alice</full-name> <network-id>79629</network-id> <stats> <followers>2</followers> <updates>4</updates> <following>3</following> </stats> <mugshot-url> https://assets3.yammer.com/images/no_photo_small.gif</mugshot-url> <previous-companies/> <birth-date></birth-date> <name>alice</name> <web-url>https://www.yammer.com/domain.com/users/alice</web-url> <interests nil="true"></interests> <state>active</state> <external-urls/> <url>https://www.yammer.com/api/v1/users/1089943</url> <network-domains> <network-domain>domain.com</network-domain> </network-domains> <id>1089943</id> <schools/> <hire-date nil="true"></hire-date> <significant-other nil="true"></significant-other> </response> <response> <contact> <phone-numbers/> <im> <provider></provider> <username></username> </im> <email-addresses> <email-address> <type>primary</type> <address>[email protected]</address> </email-address> </email-addresses> </contact> <job-title>Office Manager</job-title> <type>user</type> <expertise nil="true"></expertise> <summary nil="true"></summary> <kids-names nil="true"></kids-names> <location nil="true"></location> <guid nil="true"></guid> <timezone>Eastern Time (US &amp; Canada)</timezone> <network-name>Domain</network-name> <full-name>Bill</full-name> <network-id>79629</network-id> <stats> <followers>3</followers> <updates>1</updates> <following>1</following> </stats> <mugshot-url> https://assets3.yammer.com/images/no_photo_small.gif</mugshot-url> <previous-companies/> <birth-date></birth-date> <name>bill</name> <web-url>https://www.yammer.com/domain.com/users/bill</web-url> <interests nil="true"></interests> <state>active</state> <external-urls/> <url>https://www.yammer.com/api/v1/users/1089920</url> <network-domains> <network-domain>domain.com</network-domain> </network-domains> <id>1089920</id> <schools/> <hire-date nil="true"></hire-date> <significant-other nil="true"></significant-other> </response> </response>

  Read the article

• How do I set up a public server on a network?

  - by tyjkenn

  I am trying to set up a personal cloud server with OwnCloud on Ubuntu. LAMP is all set up. I was able to access it using the external IP address when I connected it directly to the modem, but what if I what if I want my server to share a LAN? I still want it accessible over the internet, but then if I go to the IP address from a web browser, it just tries to log into to router admin tools. The internal IP address works across the LAN, but I want to be able to access it from anywhere. This may be simple and I may be over-thinking it, but how do access my server? The router I am using is ASUS WL-520GU.

  Read the article

• Why don't I have write permission to my vmware virtual network device?

  - by Robert Martin

  I want to allow my VMWare machine to force the virtual network it's on into promiscuous mode so I can play around with honeyd. I received an error message that told me to go to http://vmware.com/info?id=161 to allow this behavior. Based on their advice, I did: $ groupadd promiscuous $ cat /etc/group | grep promiscuous promiscuous:x:1002:robert $ usermod -a -G promiscuous robert $ id robert uid=1000(robert) gid=1000(robert) groups=1000(robert),....,1002(promiscuous) $ chgrp newgroup /dev/vmnet8 $ chmod g+rw /dev/vmnet8 $ ls -l /dev/vmnet8 crw-rw---- 1 root promiscuous 119, 8 2012-03-29 10:29 /dev/vmnet8 Looks like I gave RW permission to the promiscuous group, and added myself. Except that VMWare still gives me an error message that says I cannot enter promiscuous mode. To try out the group thing, I tried: $ echo "1" >/dev/vmnet8 bash: /dev/vmnet8: Permission denied That really surprised me: It makes me think that I still haven't properly given myself the correct permissions... What am I missing?

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by bakytn

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed)

  Read the article

• What are industry standards and professional best practices in network hosts naming? [closed]

  - by Ivan

  Possible Duplicate: Naming convention for computers It seems an important and difficult dilemma for me how to name network hosts (routers, servers (while a server can be a router and host diverse services at the same time), virtual machines (while they host important services and can migrate), workstations and notebooks (using pc-username is not the best idea as users may change), printers & MFUs, surveillance IP cameras, etc). Are there known and accepted best practices for this task? Excuse me if there already was a similar question here (I think it probably was), I haven't found it.

  Read the article

• Why can't I change the domain when connecting to network shares in Windows 8?

  - by Nathan Osman

  I have a computer running Windows 8.1 Pro. I also have Ubuntu 12.04.3 Server running within Hyper-V on the same machine. The Ubuntu server has Samba installed. Both the host and guest OS are connected to the workgroup WORKGROUP. When I open up "Network" in Windows 8.1 and attempt to connect to the server (both by name and IP address), I receive the following prompt: Entering the correct username and password for an account on the server fails. /etc/samba/smb.conf has the following share definitions set: [homes] comment = Home Directories browseable = no

  Read the article

• Can I completely remove the Windows DNS in favour of BIND9 in an AD network?

  - by Vinícius Ferrão

  I would like to remove the DNS feature of Windows Domain Controllers and point the DNS servers to our BIND9 servers. I know it's possible to setup coexistence but this requires a number of extra Windows DNS Servers equals to the number of Domain Controllers in the network. Active Directory expects the _msdcs zone and other things like _tcp, _udp; etc. The main question is: how to make BIND9 takes care of all this AD specific data? And with dynamic updating to make AD even more happier. Thanks, PS: Making BIND9 points to the Windows DNS Servers to resolve the Active Directory specific zones isn't an option. We already do this... EDIT: As today, I'm running without Windows DNS. I'm writing up a guide on how to do this, and I'll update this topic.

  Read the article

• Is there a way to capture the "network user name" and the "host name" during a "login failed" alert

  - by Jorge Rivera

  I am a SQL Server 7 DBA and I would like to "improve" the default "Login failed" alert that brings SQL 7. I need a way to know what "user" (network user name) was trying to connect to the server (not only the SQL user account) and I would like to know from where the user was trying to connect (the hostname). Does someone know if this is possible? Using the SQL Profiler is not the best way since is a resource consuming task. Would be a way to setup an alert for doing this? Thanks in advance.

  Read the article

• What is the equivalent of 127.255.255.255 for OS/X machines so I can test broadcast udp packets without a network?

  - by JohnPristine

  I am trying to test my program that makes use of broadcast UDP (not multicast!). In Linux, I can use the 127.255.255.255:64651 address and everything works beautifully, in other words, I send a packet to 127.255.255.255:64651 and multiple clients listening on that port get the packet. A real broadcast example! Unfortunately on my OS/X machine (Mountain Lion) the same example does not work. Is there any way I can get 127.255.255.255 to work on mac machines? Any other solution to get broadcast working on my mac machine without a network? Note: It has to be broadcast, not multicast.

  Read the article

• Is it possible to use Logmein to connect to a sleeping (Mac) computer on a wireless network?

  - by jaydles

  I'm using logmein to access my Mac. So I have the local logmein app running on my MacBook Pro, which is on my home wireless network. I access it either from the website (www.logmein.com) or the Logmein Ignition Apps on the iphone or ipad. My problem is that I have to set my MacBook Pro to not sleep at all when plugged in to make this a practical solution, because logmein cant seem to wake it up. I did change the settings in System Preferences to allow "Wake from Lan", but it seems like this won't work with a a Wifi connection. Am I missing anything? Assuming I'm not, is it bad for my computer to basically leave it running and not asleep most of the time?

  Read the article

• Is to possible to achieve the SATA II's 3Gbps (375MBps) between home network storage and home computers?

  - by techaddict

  Gigabit ethernet only has 1Gbps (125MBps), whereas SATA II has up to three times that rate. Is it possible to achieve the rate of three times Gigabit ethernet connection which is SATA II speeds, between home network storage and the laptops and desktops with SATA II hard drives? If so, how? Or, is the limitation of a gigabit ethernet port on the laptops the limitng factor, making 1000Gbps the fastest practical transfer speed possible? (practical, meaning that without taking apart the laptop and doing physical modifications like branching a SATA II transfer cable, etc.) -- I just realized -- wouldn't a USB 3.0 cable do the trick? Since USB 3.0 can reach up to 675MBps?

  Read the article

• How can I secure Postgres for remote access when not in a private network?

  - by orokusaki

  I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

  Read the article

• In Debian, how can I route rtorrent to a certain network interface, say ppp0?

  - by Timo

  I have purchased a PPTP account from StrongVPN and configured the setup by these (http://pptpclient.sourceforge.net/howto-debian.phtml#configure_by_hand) instructions and now I want to have rtorrent do its communication to the Internet through this VPN tunnel. So I have a ppp0 interface, which has the VPN tunnel. What is the next step? I guess it has something to do with the routing tables? I am new to routing, so please be elementary and precise so that I understand! Thank you!

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >