Search Results

Search found 45949 results on 1838 pages for 'super tomtom'.

Page 336/1838 | < Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >

• Linux bcm43224 wifi adapter slows down a couple minutes after boot

  - by Blubber

  I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

  Read the article

• du excluding hard links possible?

  - by balor123

  I'm trying to determine how big a cloned Git repository is from a local file system. It creates hard links for some but not all files. How can I determine the disk usage of it? The best I can come up with is "du -a" right now with the original and again with the clone to determine the difference, since each hard linked file will be counted only once. Ideally, I would just run du on the clone and count each hard linked file zero times.

  Read the article

• Emacs open files from a filename list

  - by crasic

  I have a largish tex project that is separated into several tex files. Everytime I want to work on it I open emacs and manually C-x C-f all the files that I want to work on. I was wondering if there is a way to open files (from command line) from a file containing a list of filenames, something like filelist.txt: file1.tex file2.tex file3.tex then do cat files | emacs -nw except that emacs doesn't support the command used as it doesn't like that stdin is reassigned. any ideas?

  Read the article

• Using a Blackberry Bold as an IP Modem on Windows 7

  - by Lawrence

  I recently installed Windows 7 and now cannot use my Blackberry Bold as a modem (via a USB cable): When I query the modem it is successful. I have added the correct "at" commands. When I try connect it says "connecting modems" but then it times out with the following error: Error 638: The remote server is not responding in a timely fashion. I also have the latest desktop manager software installed.

  Read the article

• Is putting the swapfile & temp folder to ramdisk a good idea in Windows 7 64 bit with lots of RAM?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB RAM in Windows 7 64bit, quad core CPU, and all apps fit in memory, will the swap file ever be used for anything? The question is about if it's a good idea to put the swap file in a RAM disk. Would a RAM disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder on a RAM disk. I know the RAM disk is volatile memory and I don't care about its content if it gets lost.

  Read the article

• Reconfiguring, then deleting obsolete pagefile.sys from C: in one go using a batch script

  - by DanielSmedegaardBuus

  I'm trying to set up an automated script for a Windows XP installer. It's a batch script that runs on first boot after installation, and among the things I'm trying to accomplish, is removing the pagefile from C: entirely, and putting a 16-768 MB pagefile on D: instead. Here're my batch file instructions: echo === Creating new page file on D: ... cscript %windir%\system32\pagefileconfig.vbs /create /i 16 /m 768 /vo d: >nul echo. echo === Removing old page file from C: ... cscript %windir%\system32\pagefileconfig.vbs /delete /vo C: attrib -s -h c:\pagefile.sys del c:\pagefile.sys My problem is that while these are sane commands, the removal of the pagefile on C: requires me to reboot before those commands succeed.b Or, in other words — I have to first create the D: pagefile, then reboot and delete the c:\pagefile.sys file, or I'm stuck with a c:\pagefile.sys file which isn't even recognized by Windows itself (it'll just say that there's a page file on D:, and that C: has no pagefile at all). Obviously because already some pages are written to the C:\pagefile.sys file. So how would I go about accomplishing this in one go? Or, in two gos, if this is "batch scriptable" :) TIA, Daniel :) EDIT: I should probably clarify: Running those commands above are all valid, but they'll only succeed fully if I re-run the "attrib" and "del" commands at next boot. The C: pagefile is in use at the time, so I cannot delete the file it uses, and Windows itself won't remove it when I configure it to not use C: as a page file drive. Instead, it'll leave an orphaned c:\pagefile.sys file behind (which is really large). I don't necessarily need this to work in one go, registering the last two commands to run after a reboot would also be great :)

  Read the article

• where does the "get" command in PSFTP (PuTTY) save the file?

  - by paracaudex

  I'm used to running ssh on a Unix command-line and am working for the first time with PuTTY on Windows. When I type get file.txt on the PSFTP command line, where does file.txt go? PSFTP returned: remote:/somedirectories/file.txt = local:file.txt but I can't find the file locally. Thanks!

  Read the article

• Device manager has no catagory for "ports-com & lpt"

  - by Jerry Seifert

  My dell Inspiron laptop modem is not working. The Dell modem helper says that it is already in use and has a port confilct. When i go to the device manager there is not even a catagory listed for "ports". Under the modem properties is says that it connected to com 3.

  Read the article

• Is email encryption practical enough?

  - by Dimitri C.

  All emails I have ever sent were sent as plain text. Like postcards, everybody on the way to the addressee could easily read and store them. This worries me. I know privacy is something of the past, but encrypting email is possible, at least in theory. However, I wonder whether it is practical enough. Is there anybody who has experience with email security? Is it easy to set up? And can you still send and receive email from all you friends and acquaintances?

  Read the article

• Linked Tables not working With Access Database

  - by Kronass

  Hi, I have an Access database in a computer and I want to access it from other computer in the network. so I made mapped drive and created Linked Tables, then Imported all the objects (forms, queries, reports). when I open access database in the second computer and make any changes in using the forms non of the changes are affected in the main computer (supposedly server) and vise-versa. what am I missing? if this way will not work how can I access the Access database from other computer in the network and be able to use all the objects and make changes in it? hint: Access Version at main computer is 2003 and client pc 2007, will it effect?

  Read the article

• Are there any wireless webcams/cameras that Windows will recognize as a capture device?

  - by Keithius

  I'd like to have a webcam in a different room from my computer, and the distance means USB is out of the question. I know there are many wireless cameras, but what I can't seem to find out is if any of them would be recognized by Windows as a capture device (just like a locally connected USB webcam). Most of the wireless cameras I can find (e.g., D-Link DCS920; Cisco-Linksys WVC54GCA, etc.) can all stream video directly from the camera itself, which is fine if you're using the camera as a "security" camera (for private use only), but not for other uses (say, sending the video to an online video streaming service, e.g., Ustream). It seems like this should be possible; after all, wireless (WiFi) printers with scanners are recognized by Windows. Are there any wireless (WiFi) cameras out there that would be recognized by Windows as a capture device in the same way as a USB webcam would? Alternatively, a camera that's not wireless (e.g., connects via Ethernet) would do the trick too - but I imagine if anyone is going to make a remote camera like this, they'd go the extra step and make it wireless, too.

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• Setup for a live (low-latency) audio video broadcast over Wi-Fi?

  - by Majal Mirasol

  The Upgrade We are capturing audio (from mixer) and video (from a camera) from a main auditorium and passing it to separate rooms within the building. We used to have done this via manual audio/video cables and wires. We wanted to "upgrade" the system and wirelessly broadcast the stream via Wi-Fi. The Problem In our current setup (Wirecast running on A10 on a Wireless-N network), we have the problem of delay. Our streams are delayed from a minute up to five minutes on the clients (laptop/iPad/Android). This had not been a problem from the previous wired connections. Since the wireless network is local, we thought that a delay of less than a second should be achievable. Our Question And so it goes. Anybody there who has any experience for a setup that has both low latency and at the same time user-friendly to clients streaming in the program? Any recommendations would be highly appreciated. (Our current setup in on Windows 7, but setup on a dedicated Linux box is preferred, if achievable.)

  Read the article

• Firefox scrolling slow (OSX, 3.5.4)

  - by Paul Tarjan

  If I do a 2 finger gesture, it takes about 2 seconds until the firefox window scrolls, and then it is immediate and not an incremental scroll. Is this a known issue? Could it be a plugin (I don't have anything too non-standard.)

  Read the article

• Mail.app send mail hook

  - by Charles Stewart

  Is there any way to run a script whenever the user tries to send mail? I'm particularly interested in ensuring that outbound mail doesn't have a blank subject line. Solutions that involve plug-ins are welcome!

  Read the article

• Recommended partitions to migrate from Windows XP to Windows 7 and Ubuntu

  - by Juanillo

  Hello, I have a system with Windows XP. My hard disk has 189 GB NTFS. I want to change the operative system to windows 7, but I want to add Ubuntu as well. As the change might take several days (because I don't have much time) I want to install one system (or Windows 7 or Ubuntu) keeping my windows XP installed in another partition so if something doesn't work in thebrand new operating system installed I can use my Windows XP installation. So I've thouht about doing something like this: Copy the data I want to keep to an external hard disk. Make partitions enough to install windows 7, keep data in another partition and another one to install Ubuntu. Copy the data I want to keep to the partition I've just created. Install Ubuntu in the partitions for Ubuntu. Check if Ubuntu works fine If it works OK install Windows 7 on the partition of Windows XP (Windows XP will be erased). Reinstall the programs in Windows 7. So my question is: How many partitions do you recommend me to have (and the size of each one and NTFS or FAT32)? The operative system I'm going to use more is Windows 7 (though I love Linux I use many programs which are windows dependant). Do you think I should do anything else / change something in the proccess to avoid any problem? I don't know if making the partitions can harm the data I have in the disk. Thanks.

  Read the article

• upgraded to OSX 10.6.6 - now cannot sudo

  - by rahulk

  I've been using sudo until now. After an upgrade to 10.6.6, now sudo gives me incorrect password. My user has admin rights, and i can execute admin functions from the GUI (such as System Prefs, updating software etc). However, within Terminal, sudo has stopped accepting the password. I have repaired permissions and restarted. Some pointers ask me to use Directory Utility, but in this version it does not have a "set root user" option. I downloaded ServerAdminTool 10.5.7 but this does not work on my system. Some say to add myself to "wheel" group, but i need sudo for that. Some say if i am in admin group, i should be able to sudo, but this is not happening. (Using OS X Snow Leopard 10.6.6, earlier 10.5.8) MODERATOR: please delete this question. The issue had to do with Textpander expanding the password resulting in sudo failing. Not an OS upgrade issue.

  Read the article

• How to disable "Automatically search for drivers and install" in Windows 7

  - by raegadfsgfsdg

  I connected my TI-89 to my Windows 7 system, and apparently it is not plug-and-play. There was a link to a Windows configuration setting made available that gave the option to automatically search their windows site for drivers and automatically install them each time i connect an unrecognized device. Well, I selected that link with the intention of it being temporary and just that one time. That didnt work and the location/install of a driver was not successful. How can I reset that setting to not automatically install whatever drivers it thinks might be fitting? I cannot find that configuration setting when I looked for it recently.

  Read the article

• Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

  - by theonlylos

  For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

  Read the article

• How to access Guest (Linux) Filesystem from Host (Windows) in VirtualBox

  - by Dominic Barnes

  I am trying to synchronize my music between my desktop (Ubuntu 9.10) and my laptop (VirtualBox: Windows 7 host & Ubuntu 9.10 guest) I use Unison to perform the actual sync, which itself is not the problem. I am ultimately trying to get my Windows 7 host to be able to access the music files so I can sync my iPod Touch. What I need to figure out is how I can that to work. I would prefer to actually perform the sync to my Ubuntu Guest, mostly because of the filename allowed character differences between Windows and Linux. Is there a way to access the files on my Linux Guest from the Windows Host? Can I mount the VDI in Windows when VirtualBox is off? Can I have Windows Host access the Linux Guest filesystem while VirtualBox is running?

  Read the article

• Apple migration assistant hangs at end

  - by Robot

  I'm trying to migrate one Mac mini to another. Both have Snow Leopard, and I'm migrating via ethernet. The process seems nearly complete, but it's been on a screen saying "Transferring your time zone setting... less than a minute remaining" for 20 mins now Any ideas?

  Read the article

• Easiest way to create a new text file in a Finder window on OSX

  - by Jason S

  OK, so if I'm browsing directories in OS X Finder, what's the easiest way to create a new text file? Right now I have to either open TextEdit, click around until I get to the same directory I'm in, or I have to open a terminal window, cd to the directory, and touch blahblah.txt. I'm spoiled by the right-click menu in Windows.

  Read the article

• Windows 7 recognises the wrong router.

  - by Henry

  I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

  Read the article

• Excel formula: can MATCH recognise 'n'&"01", or 'n'&"02 "

  - by Mike

  I have an Excel sheet (source) that has simple ID numbers in column A (01 to 40000). In another sheet (child) I have these same ID numbers in column A but with either an additional 01 or 02 added on; e.g. 0101 or 0102, 250001 or 250002, etc. Therefore this list of ID numbers is nearly twice as long. In column B there are figures. I'm trying to extract the data from column B in the child sheet, and based on whether it has a "01" or a "02" place the figure into either column B or C of the source sheet. My idea is to use INDEX/MATCH, but I'm not sure how the match would be written to take into account the NOT EXACT MATCH of the lookup value. MATCH(A1&"01",child!A1:A100000,). Any tips and links greatly appreciated. Mike.

  Read the article

• How to activate WIFI service on Enterprise Linux Version 5 provided from Oracle?

  - by srihari

  I have installed Enterprise Linux Version 5 provided from Oracle I am able to access Internet using network cable Please tell me how can I enable WIFI service ,so that I can use internet without the network cable

  Read the article

< Previous Page | 332 333 334 335 336 337 338 339 340 341 342 343  | Next Page >