Search Results

Search found 17953 results on 719 pages for 'someone'.

Page 337/719 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

  • Is my client correct that I cannot take a vacation as a subcontractor? [closed]

    - by Rae Ann
    I have 2 clients who I do ongoing work for as a subcontractor. Both are sporadic and part-time. Company A sent me to a 3 day certification course out of state. The following week I was scheduled for a 3 day vacation. I warned company B three weeks prior to these events. During my training that Company A was paying for, Company B asked me to leave the training to workon something for them that needed immediate attention. I declined. However I made arrangements to work on it in the evening and in the early mornings after they threatened to take the work and all subsequent work for this client to someone else. I lost all networking and fun from that trip... The following week I was in Florida and was again asked to do more work on the project after the feedback from the client. The integrated product personnel would not cooperate/return any of our calls so I did the best I could. I turned in the work, explained the issue and then was gone for 3 hours. When I returned, all my access to the project had been revoked and after a week of my calls and emails I found out they replaced me. I sent an invoice 3 weeks ago and they tell me they owe me nothing because I did not do the whole project and they cannot bill the client for what I did, because they are billing for the second contractor who started over. I was told that they realize I was on vacation but as a subcontractor I lose the ability to just disappear. I was gone 3 hours! Is this normal, correct, legal?? Not only did they ruin my class and my vacation, but now they expect me to not demand payment? They ended our relationship and I was in the middle of another project of theirs too. They told me to immediately cease all work for them. How do I get paid for the work I have yet to invoice this month?

    Read the article

  • why is 64 bits version called AMD64 and 32 bits version called i386?

    - by ajsie
    I have never understood this. This is what i know: 64 bits OS if you want to handle more than 2GB RAM. Else, 32 bits OS. So on Ubuntu's homepage you can download either 64 bits or 32 bits. But the 64 bits is called amd64 and the 32 bits is called i386. So i have to have a AMD processor to run amd64? And intel to run i386? And if someone codes a software (lets say Apache). Does he have to code one 32 bits and one 64 bits? Do some softwares only exist for 32 and not 64 and vice versa? Thanks in advance!

    Read the article

  • Choosing a JavaScript Asynch-Loader

    - by Prisoner ZERO
    I’ve been looking at various asynchronous resource-loaders and I’m not sure which one to use yet. Where I work we have disparate group-efforts whose class-modules may use different versions of jQuery (etc). As such, nested dependencies may differ, as well. I have no control over this, so this means I need to dynamically load resources which may use alternate versions of the same library. As such, here are my requirements: Load JavaScript and CSS resource files asynchronously. Manage dependency-order and nested-dependencies across versions. Detect if a resource is already loaded. Must allow for cross-domain loading (CDN's) (optional) Allow us to unload a resource. I’ve been looking at: Curl RequireJS JavaScriptMVC LABjs I might be able to fake these requirements myself by loading versions into properly-namespaced variables & using an array to track what is already loaded...but (hopefully) someone has already invented this. So my questions are: Which ones do you use? And why? Are there others that my satisfy my requirements fully? Which do you find most eloquent and easiest to work with? And why?

    Read the article

  • How do I put a url n a text file and change it to html - making it a shortcut

    - by VISQL
    I've forgotten how to do this. In Windows, you can create a new text document "blah.txt" Inside blah, you can enter a url like http://kongregate.com Then.....??? I forget this step Then you change the file extension of the file to "blah.html" When you double click the file, it acts as a shortcut/hyperlink and takes you to the url you entered in the text file. Can someone tell me what the missing step it? There is something else I need to enter with the url, but I don't know what it is.

    Read the article

  • How do i impress employers with my resume?

    - by acidzombie24
    I built a entire website from scratch in 10days which looks and feels professional with the site being unique. The site has features like logging in, sending activation emails, tag/content search (lucence.net), syntax highlighting (prettify) and a diff (one of the js diffs), markup for comments all on this site and autocomplete in a textbox (remember, 10days). I wrote i have 5+ years of C# experience (i could lie and say more but smart employers will know its only 8 years old and 1.1 is very different from what we use now). I had employers REPEATEDLY say they are looking for someone who has more C# experience... wtf. Maybe they don't read my CV, maybe they dont believe it or ignore me because i am not yet a graduate. I laughed when i first read Steve Yegge The Five Essential Phone Screen Questions as i knew all of that (although i still never used graph datastruct nor know much about it). I'm pretty sure competency wise i can do the job. I am also positive no one noticed i have markup, a diff, autocomplete nor email activation/forget password (i offer a test user account). So maybe my site/example work isnt impressive bc you dont realize what is in it. In short i dont think they read my CV or notice my site. How do i impress employers? PS: The problem is i dont get to the interview. I had one and ruined it by speaking too technical to the PM because i was nervous. The other 25+ jobs either didnt contact me or was kind enough to send a rejection email.

    Read the article

  • SharePoint Saturday Huntsville Wrap Up

    - by Mark Rackley
    So, Cathy Dew (@catpaint1) and company put on a great SharePoint Saturday event this past weekend. I got to hang out with some old friends and meet some new ones. I’d list you all, but I’d undoubtedly miss someone and don’t want to offend anyone.  Although I find it odd that I see @MossLover now more since she moved to New Jersey than when she lived next door in Kansas City… what’s up with that? Anyway, Cathy did a tremendous job organizing the event.  Everything went smoothly and everyone had a great time. Maybe I can talk her into organizing the rest of SharePoint Saturday Ozarks on June 12th… you know that’s coming up? right? While you’re here why not go ahead and register right now at: http://spsozarks.eventbrite.com/  Yes.. that was a shameless plug… I did my default presentation on “Wrapping Your Head Around the SharePoint Beast”. This continues to be my most popular presentation. I try to tweak it every time and I always have fun doing it. I get to pick on people and they pick on me back, but I always manage to learn something new when I present it. I had a great interactive crowd and they didn’t throw anything at me.  All in all I consider it a success.  Thanks for coming if you attended!  You can get the slides here:  SharePoint Saturday Huntsville - Wrapping Your Head Around the SharePoint Beast Next up for me is SharePoint Saturday DC on May 15th.  Wow this is going to be a huge event with space for 1500 attendees.. no, that is not a typo!  Stop me and say hi if you are able to make it!!

    Read the article

  • .htaccess URL rewrite to multi-parameter item

    - by MrCS
    I just spent the last 10 hours of my life on this & am running in circles, so was hoping someone may be able to help me. I want a specific URL to load like this: http://example.com/f/2011/image.png?attribute=small When a URL in a format such as this hits, I'd like to rewrite it to hit the server as: http://example.com/generate.php?f=2011/image.png&attribute=small Based on above, my question is two-fold: How can I rewrite the URL in htaccess to meet my requirements above? If the original URL didn't have the attribute query string parameter, how can I ensure attribute will be false/blank/etc when it hits the server via htaccess?

    Read the article

  • Incrementing ticket numbers each time I print

    - by Danny
    I have an excel sheet where I have a set 4 identical tickets to print per page which we use for stock takes. Rather then creating a huge document with 1000 pages for 4000 tickets each with their own unique ticket number (starting from 1) I would like to find a Macro or function which will print a page with 4 tickets on (1,2,3,4) then continue to print another with (5,6,7,8) and so on. I have found some code that people have already written but it has only applied to one number changing per page rather than 4 simultaneously and being a complete visual basic novice, I was unable to change the code to suit my preferences. If someone could explain simply how I could achieve this I would be very very grateful :)

    Read the article

  • Mailer Daemon greeting failed

    - by Xelluloid
    I wrote a tool that sends automated mails to a couple of addresses. This worked for a couple of weeks. Now since yesterday I get Mailer-Daemon responses like this Hi. This is the qmail-send program at test.test2.net. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. testuser@domain.com: Connected to 123.456.789.10 but greeting failed. Remote host said: 554 foo.bar.com I'm not going to try again; this message has been in the queue too long. Does someone have an idea what I can do now?

    Read the article

  • What media formats do I have to use to prevent Zune from having to convert media for Windows Phone?

    - by Billy ONeal
    Zune is able to accept pretty much every media format under the sun, or at least can once someone's installed something like the KLite Codec Pack. However, it does do conversion on your behalf to a more supported format when you try to sync the contents over the Windows Phone. I'd like to not have to wait for the really slow process of doing the conversion... how do I know which media format to download? (For example, there are 5 media formats available for each of the MIX sessions....)

    Read the article

  • Sendmail Undeliverable Redirection?

    - by Dizzle
    Good afternoon; I don't know much about sendmail, so this may be fairly easy for those of you more experienced with it. We have an account, "[email protected]", sending reports to various groups. From time to time an undeliverable message will be sent back to "[email protected]". We'd like for those undeliverable messages to be rerouted, or bounced, from "[email protected]" to a group of our choosing. To carve out a scenario for clarity: [email protected] sends a report to [email protected] and [email protected] [email protected] has someone who's mail account no longer exists, triggering an undeliverable message being sent back to [email protected] Rather than having the undeliverable message sit in [email protected]'s Inbox, we'd like for it to be automatically rerouted/bounced to an admin group, [email protected] So I guess a "rule" of sorts. I've come across this solution: Sendmail : ignore local delivery But I don't know enough about sendmail to know if this is what will fit this situation. Any help is greatly appreciated.

    Read the article

  • Why is the Python interpreter provided by Django suddenly showing me Python tab completion upon a single Tab press?

    - by ysim
    This issue seems to have just started happening; basically I just noticed that whenever I press the Tab key in the Python interpreter that comes with Django, it gives me the Display all ... possibilities? (y or no) prompt. I opened a similar question just now, where I noticed that removing set show-all-if-ambiguous on from .inputrc fixed the problem in the non-Django Python interpreter that was showing me bash tab completion, but the problem persists with the Django one, only with Python tab completion. It's very odd and it seems to have come out of nowhere. There's nothing else in my .inputrc other than set completion-ignore-case on, which shouldn't be conflicting with the Python interpreter, but I've also tried removing that (leaving my .inputrc blank), but it's still happening. I'm not sure why this is suddenly happening, but it would be great if someone had an idea of why and how to fix it.

    Read the article

  • What gaming keyboard(s) will work with Ubuntu?

    - by belacqua
    I've been looking at gaming keyboards to use on Ubuntu system. Microsoft has a few popular ones (e.g., Sidewinder X4, X6), but the programmable function keys appear to be unusable without the Windows software. (Though here's a post from someone who has a more recent project that uses usbmon and xdotool to add functions to some keys.) Another choice in my budget is the Cyborg V.05. It seems about right for my needs, but I would be depressed having a bunch of useless, nonprogrammable keys on it. Logitech has some models (e.g., the Logitech G110), though again I expect that the extensive macro capabilities (which I don't need) would be lost under Linux. There's a project called g15tools which has some code to work with older Logitech gaming models, but I don't know what the current status is. Last entry there was in March 2010. There are also a number of very old posts around the internet with regard to the Logitech G11 and G15. Compatibility with the current keyboards, Ubuntu version, and Linux kernel are suspect. I'm in the U.S., and so it appears that few of the Roccat keyboards are available, and they're over-priced. Support might be OK for these, though -- there's a short Phoronix article about Roccat improving their Linux support, and there's also a project and webpage for "Using Roccat Hardware with Linux". Honestly, the only feature I have to have is good backlighting for the keys, and if it's not wired (which is fine), the wireless capability should function. I could probably live with dead function keys, as long as they weren't in places that would interfere with things like Unity/compiz shortcuts. Any experience or suggestions? I've not seen much to inspire confidence with programmable/macro keys. There is a thread (with no solutions) on the Sidewinder X4 on ubuntuforums here. I'm also considering the Logitech Illuminated Keyboard as a possibility, even though it's not specifically a gaming keyboard. It is backlit, and it's supposed to be a nice keyboard.

    Read the article

  • CUDA 4.1 Particle Update

    - by N0xus
    I'm using CUDA 4.1 to parse in the update of my Particle system that I've made with DirectX 10. So far, my update method for the particle systems is 1 line of code within a for loop that makes each particle fall down the y axis to simulate a waterfall: m_particleList[i].positionY = m_particleList[i].positionY - (m_particleList[i].velocity * frameTime * 0.001f); In my .cu class I've created a struct which I copied from my particle class and is as follows: struct ParticleType { float positionX, positionY, positionZ; float red, green, blue; float velocity; bool active; }; Then I have an UpdateParticle method in the .cu as well. This encompass the 3 main parameters my particles need to update themselves based off the initial line of code. : __global__ void UpdateParticle(float* position, float* velocity, float frameTime) { } This is my first CUDA program and I'm at a loss to what to do next. I've tried to simply put the particleList line in the UpdateParticle method, but then the particles don't fall down as they should. I believe it is because I am not calling something that I need to in the class where the particle fall code use to be. Could someone please tell me what it is I am missing to get it working as it should? If I am doing this completely wrong in general, the please inform me as well.

    Read the article

  • How do I take some RAM and use it towards Dedicated video memory for my Nvidia graphics card?

    - by Noah Rainey
    I have a Nividia GeForce 6150SE nForce 430 graphics card (so it's quite old), it only gets 64MB of dedicated memory by default. I went into the bios and see if I can increase it, but it wouldn't let me. However, from the Nividia control panel I see I have up to 1071MB of total available graphics memory. I'm not sure what that means and I'm not sure how I can harness this memory and use some RAM for my graphics card. Can someone explain if this is possible and if so, how?

    Read the article

  • Component MSINET.OCX or one of its dependencies not correctly registered: a file is missing or invalid

    - by tintincute
    Hi can someone please help me. I'm using win7 64Bit and I'm trying to download this program "Croque-Mort" But when I do, I'm getting an error: "Component MSINET.OCX or one of its dependencies not correctly registered: a file is missing or invalid" I tried to check it by opening my cmd.exe and run as administrator and then type : regsvr32 msinet.ocx Then I got an error: "The module "MSINET.OCX" failed to load. Make sure the binary is sorted at the specified path or debug it to check for problems with the binary or depenedent .DLL files. The specified module coudl not be found" Is there a way to install this component? Would appreciate your help

    Read the article

  • Looking for Unix tool/script that, given an input path, will compress every batch of uncompressed 100MB text files into a single gzip file

    - by newToFlume
    I have a dump of thousands of small text files (1-5MB) large, each containing lines of text. I need to "batch" them up, so that each batch is of a fixed size - say 100MB, and compress that batch. Now that batch could be: A single file that is just a 'cat' of the contents of the individual text files, or Just the individual text files themselves Caveats: unix split -b will not work here as I need to keep lines of text intact. Using the lines option is a bit complicated as there is a large variance in the number of bytes in each line. The files need not be a fixed size strictly, as long as it's within 5% of the requested size The lines are critical, and should not be lost: I need to confirm that the input made its way to output without loss - what rolling checksum (something like CRC32, BUT better/"stronger" in face of collisions) A script should do nicely, but this seems like a task someone has done before, and it would be nice to see some code (preferably python or ruby) that does atleast something similar.

    Read the article

  • How can Automator or Applescript rotate 500,000 images in folders and subfolders?

    - by Ludi
    I have very specific question. I've got 500,000 images that sit in 98 subfolders. Some of the subfolders contain 25,000 images. Is there any script/automator workflow that I can use? I was trying to create a workflow: Ask for Finder Items Get Folder Contents (tick repeat for each subfolder found) Rotate images It works OK, but only for these folders where there is less than 4,096 files: I normally receive following error message: Rotate images failed - 1 error too many arguments (12019) -- limit is 4096 Is there any way to increase this limit or create completely different apple script? I really hope that someone will help me with this one.

    Read the article

  • WLC 4400. Get IP

    - by Edward Connelly
    I have three SSID. one is a guest network and I'm having problems with lease times. Its set for web authentication so it passes IPs out even if someone doesn't try and authenticate. Is there a way to get that IP back and not hand another to that mac for a period of time? Poor planning and we didn't allocate enough address space, and we are sandwitched. We could go with another address, but we would have to reconfig lots. since its guest its vlan'd with no access to anthing but the firewalls. would have to change ACLs and routes and interfaces. if it isn't possible we will just have to go that route, just thought there might be an easier solution. session timeout is enabled with 1 hr lease time is set to 4 hrs. no helper DHCP and internal DHCP is set with the space split across three WLCs (60 waps split across those as well).

    Read the article

  • Have there been attempts to make object containers that search for valid programs by auto wiring compatible components?

    - by Aaron Anodide
    I hope this post isn't too "Fringe" - I'm sure someone will just kill it if it is :) Three things made me want to reach out about this now: Decoupling is so in the forefront of design. TDD inspires the idea that it doesn't matter how a program comes to exist as long as it works. Seeing how often the adapter pattern is applied to achieve (1). I'm almost sure this has been tried from a memory of reading about it around the year 2000 or so. If I had to guess, it was maybe about and earlier version of the Java Spring framework. At this time we were not so far from days when the belief was that computer programs could exhibit useful emergent behavior. I think the article said it didn't work, but it didn't say it was impossible. I wonder if since then it has been deemed impossible or simply an illusion due to a false assumption of similarity between a brain and a CPU. I know this illusion existed because I had an internship in 1996 where I programmed neural nets that were supposedly going to exhibit "brain damage". STILL, after all that, I'm sitting around this morning and not able to shake the idea that it should be possible to have a method of programming to allow autonomous components to find each other, attempt to collaborate and their outputs evaluated against a set desired results.

    Read the article

  • Is it possible to use images in an Excel IF statement?

    - by dunc
    Quite a simple one here, but I guess the answer will be a resounding no! I have a few symbols, basic clip-art, which I'd like to display depending on certain information. At the moment, I'm using this statement to display Y or N: =IF(B2>0,VLOOKUP(B2,'Student Data'!$A$2:$L$36,8),"") It's a simple lookup which checks another worksheet to see if someone has entered "Y" or "N" into the relevant column. What I'm wondering is this: would it be possible to display these clip-art images (I have them in .PNG format) instead of simple text? I.e. IF VALUE_OF_CELL=7, DISPLAY IMAGE1. Thanks in advance,

    Read the article

  • How can I copy files to an external drive and verify their integrity in OS X?

    - by jedavis
    I'm moving large amounts of data from one external drive to another larger one. The files are important and the smaller drives need to be cleared and reused (HD camera). Is there some utility for moving files and verifying their integrity? I've been using this command find . -type f -exec md5 '{}' \; > md5list.txt in the terminal to create a list of MD5s for each file then using diff to compare the two. However, I am moving 320GB at a time, which takes a while by itself. Computing the checksums takes another hour or so. It would be much more efficient to do this on the fly, during the copy. I'm just hoping someone has already written the software...

    Read the article

  • M-Audio Delta 1010LT on 12.04

    - by user74039
    I have 12.04 64bit installed, my soundcard is a Delta 1010LT, it seems to be partially detected, I've been following steps here: https://help.ubuntu.com/community/SoundTroubleshooting/ lspci -v | grep -A7 -i "audio" shows this: 04:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. M-Audio Delta 1010LT Flags: bus master, medium devsel, latency 64, IRQ 22 I/O ports at ec00 [size=32] I/O ports at e880 [size=16] I/O ports at e800 [size=16] I/O ports at e480 [size=64] Capabilities: <access denied> Kernel driver in use: snd_ice1712 aplay shows this: **** List of PLAYBACK Hardware Devices **** card 0: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 In the sound settings on the desktop all I see is the ICE1712 S/PDIF, which I don't use, I want to use the individual outputs on the card, I'm not so bothered about inputs, I just want the playback for now. If I open alsamixer in the console, I see all of the output and input channels, i've raised the volume on them but I don't get anything in the sound settings on the desktop and when I play any sound, I hear nothing. Can someone help?

    Read the article

  • How to install Python 2.7 w/ unix libs on cygwin

    - by JIStone
    I have been trying for about a week to get this to work. Obviously getting Python 2.6 is easy - just install the cygwin package with setup.exe. Installing the windows version of Python2.7 was also easy, but I could not access the Unix Modules. So I've been trying to install Python from source, but it seems every time I fix one make error there is another waiting just behind it. Getting rather fed up with the whole thing & thinking someone else must have either done this or figured out it is impossible. I feel installing Linux would have been the easier route . . .

    Read the article

  • Startech SVx41HDI Series Server Remote Control Usage Question - How do I switch away from a dead por

    - by tajh
    We have a Startech KVM over IP model SV841HDI and it was stuck pointing a port where the machine has been removed. We ended up having to physically plug something into that port in order to switch ports again, meaning that if someone in support accidentally switches to an empty port, we need to have a documented solution for making it useable again. The unit is old, no longer under warranty, firmware updates for it are no longer available (interestingly it runs a powerPC version of busybox). Since it does work well except for this one catch, we would like to avoid replacing it. Reading the manual, you have a several recommended methods. I tried them. Hit the left CTRL key a few times (as well as all the other popular KVM keys I could think of). The VNC GUI offers lots of buttons - none of them switch away from a dead port. The question is: how do I switch away from a dead port on this particular KVM remotely?

    Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >